1. science
2. physics
3. optics

DNV Approved & Certified Worldwide
Safety and confidence in every lift
Introduction
Six Key Benefits
• Designed and built by heavy lift engineers.
• Unique modular system prevents
incorrect assembly
• Stackable storage & transportation racks
save space and protect the beams
• Strut lifting eye-holes helps assembly
• Torque wrench provides accurate bolt
tightening to the required setting
• Easy on the bank balance, SureLift
is priced so you make money.
Fool proof modular system prevents
capacity/type assembly error
SureLift, the quality name in the lifting industry is designed by experienced
engineers for lifting professionals.
At CEA we have many years of practical experience in the heavy crane,
lifting and logistics industry. We decided to draw on our vast experience
to produce a range of lifting products that completely match the stringent
requirements of the industry today.
In the past we were limited with equipment choices that partially fulfilled
our requirements and the high demands of the lifting industry, so we
designed a range of beams to meet industry needs for ourselves and our
clients and achieve the highest possible international standards.
Strut lifting eye-holes for
smoother assembly
SureLift torque wrench with accurate
bolt tightening settings
Key Components
Product Overview
EA End Arm
IS/05 50cm Section
IS/4 400cm Section
US Upper Shackle
IS/1 100cm Section
IS/5 500cm Section
LS Lower Shackle
IS/2 200cm Section
IS/6 600cm Section
DL Drop Link
IS/3 300cm Section
Unique modular spreader beams in six
carefully planned sizes from 50t to 400t
that permit variable lengths to suit the
load requirement, with no possibility of
incorrect assembly.
SureSelect
Sure Assist
We offer expert guidance when it comes to selecting the correct
beam. Our in-house, simple-to-use software ensures you get the
right beam every time, we call it SureSelect.
Our website is online 24/7 to make sure you have all the
information and active support you need. You can contact us
directly or find your nearest local distributor who can give you
the answers and support you need in your own language and
time zone.
Just type in the load and dimensions of your lift and SureSelect
will provide you with the full details required for your lift
including beam combination, sling lengths and shackle sizes.
Access SureSelect on your iPad, Android tablet or smartphone
on-site to enable you to get a correct configuration for the beam
and equipment for the actual job in hand.
An instructional video on how to correctly assemble and safely
use the beam is available on our website.
Visit cea-surelift.com for more information.
Protective Process
We ensure that every beam we sell is
protected in the best possible way against
the rigours of handling, assembly, storage,
on and offshore use and corrosion.
The graphic shows the way we take care
of this as standard. If you require a higher
level of protection, we can coat the beam
to suit your requirements at a small
additional cost.
1
2
3
4
5
The protective process illustrated…
1 Mill Finish 2 Blasted White Metal 3 Primer Coat 4 Undercoat 5 Top Coat Gloss
Essential Services
Lifting attachments that you will use over and over again.
All beams come with special lightweight nylon lifting slings to make assembly easy
and to prevent damage by direct handling, for example by fork trucks. Operators and
riggers will appreciate how easy they are to use when executing client lifts. Surelift is
the professional choice when ensuring lifts are done quickly and without issue.
DNV Testing
Special Lift & Rig Planning
DNV is the most respected and recognised standard to which
a manufacturer can aspire. At CEA SureLift we have taken great
care at every step of our designs and fabrication to follow exact
procedures and criteria specified by DNV.
For those lifts that are more complex than just a simple single
spreader bar between the slings, CEA SureLift provide a
complete lift planning service to assist you in deciding what the
most suitable and cost effective solution is for the lift.
The design, production and testing procedures for each model
of beam have been approved by DNV. Copies of our certification
are available on our website.
Complex arrangements of beams between multiple slings are
often used and we can design such lift rigs for you.
If a higher level of certification and testing is required, a full
DNV fabrication survey and test witnessing on all beams can be
provided at an additional cost before it’s delivered to you.
Sometimes it may be possible for us to involve your local CEA
SureLift distributor or local crane rental company to provide you
with either new, used or even rental equipment to do the single
lift you require.
Training
Purpose Designed Beams
Having the best equipment is only the first step. The beams are
designed to prevent incorrect assembly but SureLift want you
to achieve the best selection and use of your beams so we offer
comprehensive training courses. Courses can be held at our
factory, distributor’s premises or your own facilities. Training
offered includes:
On occasions there are lifts that fall outside the performance of
standard range beams. In this case it is necessary to use a beam
designed to your particular lift specifications.
• Selecting the right beam for the job
• Correct assembly of the beams under job site conditions
• Correct torquing of the flange bolts
• Correct selection of shackles and slings
• Dismantling, handling and storage of
the beams slings and shackles.
Training videos are available for those unable to attend our
training courses. These are helpful health & safety guides, and
useful in technical presentations to your clients.
Our engineering design department is fully qualified and well
experienced in the design of all types of spreader and lifting
beams to satisfy many bespoke requirements.
We provide a full engineering design service encompassing
layout & detailed design, analysis and reporting.
Using the latest technologies in 3D modelling and analysis, we
provide full design proposals with comprehensive calculation
reports citing all applicable local and international regulations.
Following fabrication, full certification and testing to
specification can also be included in our commercial proposal.
Functional Accessories
A range of accessories designed to make your lift easier and safer
from the calibrated torque wrench to DNV compliant bolts.
If you have any questions regarding our accessories or would like to place an order with
your local reseller. Please email info@cea-surelift.com
TORQUE WRENCH
SOFT SLINGS
CONTAINER SPREADERS
We supply a torque wrench with every
beam to assist with the correct assembly.
Can be supplied separately if required.
Soft slings suitable for lifts where chain or
wires may damage the load. Available in
all lengths and capacities from 10t to 300t.
Transverse and longitudinal lift container
spreader beams are designed, engineered
and fabricated on request.
SHACKLES
HOOK BLOCK
CRANE OUTRIGGER MATS
The correct shackles can be supplied
together with your beam or separately
according to your requirements.
We supply European made hook blocks
from 5t to 500t capacity for mobile cranes,
gantry cranes and marine use.
Extra tough plastic outrigger mats from
0.5m2 to 4m2 in area, light to carry and
extremely hard wearing.
LED WORK LIGHT
LIFTING BEAM
CONTAINER BEAM
Boom or tower mounted to give almost
daylight conditions on the job site. Operate
from the crane battery or power pack.
Beams available to suit all special lifting
requirements, certified according to the
job requirements.
Range of standard and custom automatic
twist lock container beams to suit
standard 20ft and 40ft containers.
Spreader Beam SWL Capacity Graphs
The design and structure of our capacity graphs have been
developed to ensure they are simple and clear to follow.
SWL (Tonnes)
50
45
SL50
Sling To Vertical
STV 45°
STV 30°
STV 15°
40
35
30
25
20
15
10
1
2
3
4
5
6
7
8
9
10
11
Span (Metres)
SWL (Tonnes)
70
65
60
55
SL70
50
Sling To Vertical
40
STV 45°
45
35
STV 30°
30
STV 15°
25
20
15
10
1
2
3
4
5
6
7
8
9
10
11
12
Span (Metres)
SWL (Tonnes)
110
100
90
SL110
80
Sling To Vertical
60
70
STV 45°
50
STV 30°
40
STV 15°
30
20
10
2
3
4
5
Span (Metres)
6
7
8
9
10
11
12
13
14
15
16
SureSelect – smart online software
Easy-to-use online software that makes your lift plan easy.
Visit www.cea-surelift.com/sureselect-lift-planner
SWL (Tonnes)
SL180
Sling To Vertical
STV 45°
STV 30°
STV 15°
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
2
3
4
5
6
7
8
9
10
11
10
11
12
12
13
14
15
16
17
18
Span (Metres)
SWL (Tonnes)
250
225
SL250
Sling To Vertical
200
175
150
STV 45°
125
STV 30°
100
STV 15°
75
50
25
2
3
4
5
6
7
8
9
13
14
15
16
18
19
17
18
19
20
Span (Metres)
SWL (Tonnes)
SL400
Sling To Vertical
STV 45°
STV 30°
STV 15°
400
375
350
325
300
275
250
225
200
175
150
125
100
75
50
25
2
3
4
5
6
Span (Metres)
7
8
9
10
11
12
13
14
15
16
17
20
21
22
23
24
International Certifications
CEA Engineering are the holding company of the CEA SureLift
trade name and are associate members of LEEA.
We are recognised for our expertise in the design and production of lifting
accessories. We hold 3rd party design verification type approval from Det Norke
Vertitas as standard on the full range of spreader beams up to SL400. We can further
provide DNV fabrication survey and proof load testing certification if requested at
additional cost.
Our SureLift products conform with International legislation across the USA, Europe,
Australia and the rest of the world.
Frequently Asked Questions
Below we have answered some of the more common questions
are clients have. We also keep the latest FAQ’s on our website,
so whatever your question, just let us know by email and we’ll
answer it. Send your question to info@cea-surelift.com
For latest FAQ’s, visit cea-surelift.com/faqs
Q. How many struts can I insert between the two end units?
A. Any number and combinations up to five pieces.
Q. Is the position of the different length
struts in the beam important?
A. As a general rule the longest strut should be placed in
the centre as this will make the weight of the beam more
balanced. Other positioning will not affect the SWL
Q. If I only have longer slings than the actual
length on the chart can I still use these?
A. Yes as long as both are of equal length, the capacity shown
on the chart for the correct length will still apply.
Q. If I buy only a short beam can I buy
more components for it later?
A. Yes, however you must check if the new length beam may
need testing locally if the authorities require local regular
testing of beams.
Q. Is the internationally recognised certification you provide
with each beam all I need to use my beam in my country?
A. Your local authorities may require you to perform a test and
inspection to issue a local certificate prior to your use of the
beam. Each beam may need retesting and inspection after a
prolonged duration, please check with the local authority to
make sure the beam certificate is valid.
Q. Can I mix components from other capacity SureLift
Q. Can I re-use the fixing bolts?
beams by mistake when assembling my beam?
A. DNV recommended that the fixing bolts be replaced after
A. No. SureLift have designed each capacity beam with a
each assembly but this depends on your local certification
different size and it’s impossible to get components mixed up
requirements.
when assembling a beam.
Q. Is it essential to torque the bolts to the
Q. Can I use a fork lift truck to pick up my beams?
recommended settings on the charts?
A. No. These should be avoided as they can damage the tubes.
A. This is critical and for this reason we supply you with a
These are structural beams and if they get damaged by the
pre-marked torque wrench with each beam.
forks then their strength may be affected.
Find your local distributor
We have official distributors in many countries in the world who
can help with your technical enquiries. Some have stock available
and are able to quote you the best price and delivery for our
whole range of beams.
Check our website to find the most up-to-date information on our nearest distributors.
www.cea-surelift.com
CEA ENGINEERING CONSULT COMPANY LIMITED
41/13 M1, Ao-Udom Road, Tungsukhla, Sriracha, Chonburi 20230 Thailand
Phone +66 38 354 019 Fax +66 38 354 772 Email info@cea-surelift.com
Registered in Chonburi, Thailand. Registration Number 0205557016242