1. No category

News Release
For immediate release
PROCAP transforms agro chemical packaging with new
tamper-evident, UN-compliant 63 PROCURVE closure
63 PROCURVE provides an easy-to-open closure for a wide range of agro chemical
containers, using an innovative closure design in combination with a standard disk foam
liner.
Wiltz, April 2015 - PROCAP, a major European player in the plastic caps and closures
industry, introduces 63 PROCURVE, a standard yet versatile closure for agro chemicals. 63
PROCURVE has been designed specifically for HDPE and Co-ex containers with a capacity of
more than one litre and a 63mm neck finish. The novel closure is ideal for the packaging of
herbicides, insecticides, pesticides and fungicides, whether in powder or liquid form and
whether water- or solvent-based. 63 PROCURVE (with no induction heat seal (IHS))
actually simplifies the filling process for these agro chemical products. With a standard
multi-layer PE foam disk liner, this revolutionary solution is fully UN compliant and
conforms to IATA for air shipment, thanks to the innovative ratchet-type TE band it
comprises. The closure also features a small inspection window for visible control at the
initial screwing stage.
Composed of high-quality materials, 63 PROCURVE offers low opening torque on first usage. The
closure has been specifically designed with the end user in mind to offer real ease of use, not just in
terms of easy opening, but closing and cleaning too. With no IHS, 63 PROCURVE also improves
recycling of the total package - closure, container, labelling - making it more environmentally
friendly.
63 PROCURVE represents a leakproof, secure total packaging solution that enables agro chemical
manufacturers to significantly increase the safety of their product. When the bridges are broken on
first opening, the TE band drops down to offer visible evidence of tampering. With 63 PROCURVE, the
container maintains a complete seal on reclosure, again making it a very secure closure solution.
63 PROCURVE’s standard multi-layer foam disk liner makes it fully compliant with all official
guidelines with regards to UN chemical resistance and mechanical tests, verifying it as a reliable and
efficient closure for agro chemicals that delivers the required seal for the transportation of
dangerous goods. PROCAP obtained its current UN certification based on tests of a 5L HDPE and Coex AgriChem container sporting the 63mm PROCURVE closure solution. At UN level 3H1/Y1.4/130
with H²O (water) the closure demonstrated screwing torque below 6.0Nm when initially screwed
following filling. Torque this low makes it very easy for the end user to open manually. With a
standard multi-layer PE foam disk liner, 63 PROCURVE requires no IHS liner to provide a full chemical
barrier. The closure has also proven to be leakproof under hydraulic pressure conditions. Indeed, the
greater the pressure, the more leakproof 63 PROCURVE becomes. 63 PROCURVE has been cleverly
designed to complement the neck of the container so that the two work together to obviate
destructive compression of the disk foam liner when stacked or even dropped. This was confirmed by
laboratory and UN test results.
63 PROCURVE’s standard overall dimensions mean it can be introduced to filling or capping lines
quickly and easily with minimal modification required, allowing fillers to take immediate advantage
of this pioneering cost-effective agro chemical total closure solution. 63 PROCURVE is part of a
complete service offering that also comprises technical assistance for product integration and after
sales support, as required.
PROCAP invests heavily in research and development and continually strives to create advanced
solutions that feature the most appropriate TE band type and can be used for different neck
dimensions. The choice of the ratchet-type TE band for 63 PROCURVE was to help ensure that it
would conform to IATA regulations for air shipment, something it has achieved. PROCAP is currently
investigating PROCURVE’s compatibility with different TE band types and larger neck diameters on
bigger container sizes, including 5L, 10L and 20L. First results are very promising.
About PROCAP
The PROCAP Group is a European leader in the development, production and sale of plastics caps &
closures. It produces advanced solutions for the food, chemical, pharmaceutical, cosmetic and DIY
industries. A dynamic and flexible family-based group, PROCAP strives to be a good corporate citizen,
focusing on offering exceptional service and ensuring customer satisfaction.
The company is headquartered in Luxembourg and has manufacturing facilities in Belgium, France,
Germany, Hungary, Ireland, Luxembourg and Spain. PROCAP’s turnover amounts to 118 million Euros
and employs 450 people.
# # #
Contact:
ARK Communication
Martine Baetslé & Ann-Sophie Cardoen
martine@ark.be – ann-sophie@ark.be
T +32 3 780 96 96 – T +31 30 850 60 43
PROCAP Group
Raf Van Grieken
Product Marketing Manager
raf.vangrieken@procap.com
T +32 3 821 16 59
www.procap.com