1. No category

JOINT CUTTER
CF-5030
30
Powerful,
low-emission
4-cylinder-diesel engine
55 kW
• common-rail-technology
• equipped with a gearbox for an
optimum power transmission to
the cutting shaft
• gearbox optionally allows cutting
in forward or backward direction
• hydraulic feed
• hydraulic support wheel
• hydraulic drive
• hydraulic cutting depth adjustment
Colour touch screen display for controlling and for simple monitoring
Indication of the blade diamater via numerical keyboard of the control panel
The display indicates numerous status messages:
• choice of blade diameter
• switching on/ off of the electrical water pump
• fuel gauge
• speed of cutting shaft
• rotational speed of the saw blade selected
• operating hours
• temperature of oil and cooling water
• battery voltage
• currently used V-belts
• display of error and status messages
• electronical lane departure warning system
• digital cutting depth display
User and environmentally-friendly
• lane departure warning system
- electrically adjustable with position display
• very low vibration
• exact alignment of the machine in cutting
position via electrically adjustable
rear axle
• support wheel for easy relocation and
setting up the machine
• exhaust after treatment system with
oxidation catalytic converter
• emission standard Tier 4 Final
JOINT CUTTER
CF-5030
Saw blade diameter from 450 mm to 1200 mm
Cutting depth up to 500 mm
High torque at moderate
fuel consumption
Multifunctional joystick
for motion speed
and lowering
3 types of saw blade diameter
Each version can be converted to the desired
saw blade diameter with the corresponding
conversion kit.
CF-5030 version A | order-No. 50003002
• for diameter 450 mm - 600 mm
• suitable blade guard 600 mm (order-No. 50003022)
CF-5030 version B | order-No. 50003001
technical data
CF-5030
version A
CF-5030
version B
CF-5030
version C
• for diameter 800 mm - 1000 mm
• suitable blade gurad: 1000 mm (order-No. 50003021)
or 800 mm (order-No. 50003023)
CF-5030 version C | order-No. 50003000
cutting depth
mm
170 - 245
315 - 415
400 - 500
blade-Ø
mm
450 - 600
800 - 1000
1000 - 1200
• for diameter 1000 mm - 1200 mm
speed of cutting depth
rpm
1750 - 2230
949 - 1364
811 - 1067
• suitable blade guard: 1200 mm (order-No. 50003020)
bore hole of blade
mm
35 + 6-hole
blade mounting
-
right or left
motor output
kW
motor type
-
motor starter
-
cutting depth adjustment -
55
Hatz 4H50TIC (diesel)
electric
electro-hydraulic
hydraulic
Accessories:
• electric water pump
• suction plant
• headlamps
• blade guard (Ø 600, 800, 1000, 1200 mm)
feed
-
conversion kit for blade-Ø
order-No.
dimensions L/W/H
mm
1873 / 931 / 1295
450 - 600 mm
50003012
weight
kg
1200
800 - 1000 mm
50003011
1200 - 1000 mm
50003010
Blade guard is absolutely necessary!
Cedima Diamantwerkzeug- und Maschinenbaugesellschaft mbH
Lärchenweg 3 • D-29227 Celle • Tel. +49 (0) 5141-88540 • Fax +49 (0) 5141-86427
info@cedima.com •www.cedima.com