Download Report

COMPUTERZIED COLLAR KNITTING MACHINE
MODEL: XDJX08-DC
MODEL: XDJX08-DC
Multifunctional Needle Plain Collar
Knitting Machine
Gauge : 7G, 12G, 14G, 16G
Bed Width : 80INCH
Carriage: Double carriage, single system
Size: 2880*800*1400mm
N.W.:
750KGS
MODEL: XDJX08-A
MODEL: XDJX08-A
Multifunctional Needle Plain Collar
Knitting Machine
Gauge : 7G, 12G, 14G, 16G
Bed Width : 52INCH
Carriage: Single carriage, single system
Size: 2200*800*1400mm
N.W.: 550KGS
KNITTING SAMPLES FOR ABOVE 2 MODELS
Main Characteristic For Above 2 Models :
Yarn feeder:
Two side interchangeable feeders, main 6 colors.
Cam system:
Tuck cam system on front bed & rear bed
Stitch density: 0~99 division by computer control
Needle Jack:
Jack set on the front & rear bed; can hang low needle to knit.
Capable to knit square, mini jacquard and line etc.
Knitting Speed: 1.2m /sec max (subject to knitting width and knitting condition)
Racking:
2inches maximum.
Roller:
Single or Group spring take down system for your choice.
Stop motion:
Yarn break; knot; yarn gauge; fabric drop; needle break; floating
knit; piece count; motor overload; stitch motor & cam motor error;
racking error
Command:
Commanded by equal belt; program control of speed; sensor setting
Aerial:
New type electronic aerial
Light:
Green: working. Red: error/stop
Power:
220v/380v
Control system: Computer system
Display language: English/Chinese
COMPUTERIZD COLLAR KNITTING MACHINE
MODEL: XDJX09-A
MODEL: XDJX09-A
Multifunctional Needle Transfer Collar
Knitting Machine
Gauge : 7G, 12G, 14G, 16G
Bed Width : 52INCH
Carriage: Single carriage, single system
Size: 2200*800*1400mm
N.W.: 550KGS
Main Characteristic
This machine adopts computer program control, mainly applies with the material of cotton, ramie, silk, wool, polyester fiber,
blending etc to realize auto knit of woolen sweater and cloth annex.
This machine has many functions, such us auto six color yarn change, auto adjust fabric stitch, auto control high and low
foot knitting needle to knit ,tuck and not knit, auto needle bed movement, auto roll, drag and pull ,auto count pieces, thick
knot auto stop, yarn broken auto stop etc.
By different material and working width, you can select free speed adjustment when knit. Because the transmission mode of
this machine adopts synchronous belt back and forth movement, you can adjust the carriage back and forth stroke
according to the width of the knitted fabric.
According to the different arrangement of knitting needle, we can knit regular jacquard fabric, sweater cloth and other fabric
etc. such us square, straight stripe, vertical stripe, double rib(often called star-studded sky).The machine with a high turn,
low-over, all over function, and can do a variety of pick-hole lead Salisbury, at the end face-off, face off at the end and do
all kinds of rules jacquard, suitable for high-quality woolen factory annex to the regulations, and garment factory various
jacquard collar yarn
1. Weaving Speed: Variable-frequency speed control, arbitrary adjustment, the maximum is 1.2 m / sec.
2. Power Requirements: AC220V ± 8% 50HZ
3. Drive Motor Power: 550W
4. Needlebar Travel Distance: 3 needle pitchs on the left and right, and the maximum sliding distance is up to 6 needle
pitches.
5. Density Regulation: step motor 150-grade trimming, eight sets of stitches
6. Knitting Needle Category: Steel leather low kind knitting needles; lower section high and low types of pins
7. Transmission mode: synchronous belt reciprocating motion, any adjustment of woven spans
8 Control Modes: controlled by computer procedures and liquid crystal display
Special Functions :
1.
The knitting and density of commonly used clothing accessories was controlled by the stepper motor , adjust the 150
levels ,8 group of items .
2.
Add the high or low feet pin ,enriched features of jacquard
3.
Add the needle with over features of special design
4.
Add the high turn, low-over, all over ,picked holes, before the turn, after turn, after the former functions
KNITTING SAMPELS
FULLY JACQUARD COMPUTERIZED FLAT KNITTING MACHINE
MODEL: YB-518S
MODEL: YB-518S
FULLY JACQUARD COMPUTERIZED FLAT KNITTING MACHINE
Gauge : 7G, 12G, 14G, 16G
Bed Width : 52INCH
Carriage: Single carriage, single system
Size: 2600*870*1500mm
N.W.: 700KGS
Main Characteristic :
Single Carriage with single cam system , this Series computerized flat knitting machine are used digital
technology to achieve the patterns of knit ,transfer , pointel , , jacquard ,apparent shape, hidden shape ,
and other regular or irregular patterns knitting functions , can knit basic single or double jersey plain fabric ,
irregular multi-color jacquard , cable and pointel structure patterns , which suitable to knit by yarns of pure
silk ,mixed silk , synthetic , wool ,acrylic ,mixed fiber material etc. knitted for shaping fabric and
accessories of collar , cardigan ,rib, cuff, scarf ,pocket and trousers etc.
MAIN PARAMETER
Gauge
7G, 12G, 14G, 16G
Knitting width
52INCH 60INCH
Knitting function
Knit ,miss, transfer, pointel,
irregular patterns.
jacquard, hide or apparent shaping and other regular or
Knitting speed
Controlled by servo motor, 24 sections speed optional, max 1.2M/S.varies according to
gauge and knitting condition .
Knitting system Single carriage with single system
Needle bed
Replaceable segment needle bed
Takedown roller
Programmed instruction, controlled by marching motor, changeable 24 levels and
selectable scope: 0-99.
Transfer
Combined cam box single or double system can work independently and one system
can transfer the stitch While the other system keeps knitting.
Racking
Controlled by servo motor racking within 2 inches and with fine adjusting function.
Protection
The machine will automatically alarm if yarn-breaking, knots floating, yarn rewind ,end
of knitting, fail of racking needle, breakage error, programming occur.
Stitch system
Controlled by stepping motor, 24 section stitch selectable, adjustable scope supported
by subdivision technology: 0-650, the stitch of the knitwear can be accurately
controlled.
Encoder
Advanced encoder adopted.
Yam carrier
2×6Yarn carriers on each side of 3guide rails, shiftable on any needle position(special
intarsia carriers available).
Sinker system
Controlled by stepping motor, adjustable to different knitwear, have various results of
shapping and patterns.
Power
Singe-phase 220V, adopts advanced CMOS technology, having memorizing function at
power shock stop.
1. Screen: Adopt LCD industrial screen and figure interface, input device :USB. Internal
storage 32M.The latest system 1G. A great amount of design files can be stored at the
same time and they can be fetched out for using at any time as per production
requirements.
Controller
2. Monitoring menu, each kind of operating parameter can be shown, and they can be
adjusted at any time when the machine is running is visual and easy to understand and
upgrade.
3. Free design is visual and easy to understand and upgrade
4.Multi language version :there are Chinese .English etc. languages version ,the other
language version set up shall according to customer requirement .
KNITTING SAMPLES :