Download Report

CT Liquid Applicator
A Message from Tom Johnson, President of Changing Times, LLC
We live in Changing Times in all areas of industry; agriculture is no exception. I have been actively involved in developing
new technologies for agriculture for over 3 decades. It has become evident to me that the next area that is in need of further
development is specialty equipment for the new low volume specialty products that are coming to the marketplace. New
products can bring great solutions to a vast array of problems facing high yield crop production. However, those new product
innovations can only be highly successful on the farm if they can be easily and effectively applied to the target.
That’s where Changing Times or CT Applicators come into the picture. The innovative CT Applicators are designed to give the
user the most accurate application of low volume use products that are common in production agriculture.
I believe that CT Applicators are the most durable and most accurate dry and liquid applicators in the marketplace today. It is
my sincere desire to bring the best application solutions possible to as many industries as possible.
Maximizing your yield starts by treating your seed.
To obtain the best use of your treatments, you need to treat the seed
as close to planting as possible. The CT Liquid Applicator does just
that - it can be used in-field or while filling the seed tender.
Our CT Liquid Applicator can be used to evenly apply any liquid seed
treatment that can be farmer applied or applied with applicable
license. This applicator applies your seed treatments in the field when
you are ready to plant.
· 12 volt, 5 gallon liquid applicator
· continuous agitation pump
· drain for easy clean out
CT Liquid Applicator.
· in-line clear bowl filter
· pressure gauge, adjustable ball valve and orifice for rate regulation
· Dry and liquid applicators can be used separately or together
· Allow farmers to apply products needed at time of planting
· Saves farmers labor, time and money
CT Liquid and CT Standard Dry Applicators
mounted on 4 box seed tender.
· Can be used with any seed delivery system
Settings for the CT Liquid Applicator
Flow
10 PSI
20 PSI
30 PSI
29
6.9 oz/min
9.7 oz/min
11.9 oz/min
46
17.3 oz/min 24.5 oz/min 29.8 oz/min 34.4 oz/min
70
39.2 oz/min 55.3 oz/min 67.8 oz/min 78.3 oz/min
Regulator
40 PSI
13.7 oz/min
Pressure is adjusted by changing the position of the yellow valve handle that is located just
above the pump motor. Changing the position of that valve setting will increase the volume of
liquid returning to the tank and increase agitation in the tank thereby reducing the pressure or
the inverse. The agitation decreases as the pressure increases. Operation in a range of 10 to
40 PSI will keep good agitation in the tank and produce even product flow.
The Flow Regulator Disc sizes of 29 (installed), 46 and 70 (taped to tank) provide a range of
application that should be adequate for most seed treatments and hay or silage inoculants. A
fan nozzle may be added to the system if desired (not included) by adding below the Flow
Regulator Body with a 1/4” pipe thread fitting and a nozzle body. It is suggested that the nozzle
be sized slightly larger than the Flow Regulator and let the Flow Regulator do the work of
managing the application pressure and flow. The hose length between the Flow Regulator Body
and a Nozzle Body should be no more than 6 inches.
Dripping of product from Flow Regulator Disc body can be minimized by closing the 1/4” valve in
the application line (Blue Handle).
Toggle switch will turn off the pump motor but will not stop drip from the Flow Regulator Body.
The yellow valve handle located below the 5 gallon tank can be opened to easily drain the
contents of the tank.
2832 9th Ave. SW, Unit 16 • Watertown, SD 57201
SALES & SUPPORT: 605-878-3611
E-mail info@ctapplicators.com
facebook.com/ctapplicators
PRODUCTION LOCATION:
PO Box 21, Buffalo, SD 57720
www.ctapplicators.com
Made in the USA