Product Data Sheet 3M™ Ionized Air Blower 9300 The use of ionized air in electronics work environment will help remove the build-up of potentially damaging static charge. Air ionizers are primarily used to control static charge on nonconductive material by generating a well-balanced flow of ionized air particles, which helps neutralize stray electrostatic build-up on a surface. Charges are dissipated in seconds and the possibility of a damaging electrostatic discharge (ESD) is minimized. The 3M ionized air blower 9300 blankets the surface of bench with ionized air to help prevent static from damaging electronics. Features • Eliminate the build-up of potentially damaging static charges in work area and on insulator materials. • 3-fan, 8-point ion generation technology capable of generating large amounts of ions for instantaneous neutralization. • Variable speed options - low, medium, high fan-speed control. • Low speed option for lightweight materials handling on table. • High speed where rapid neutralization is required. • Easy-access cover for easy cleaning of fan and emitters. • Power-on indicator lights. • White finish, metal housing. Specifications Description Typical Values Method Operating voltage and Frequency 230VAC/50Hz, 110VAC/60Hz – Power Consumption 40 Watts – Indicators Amber light on power switch – Ion Emission Steady-state DC – Balance Voltage ± 15V (25 ± 5˚C, 45 ±10% RH) ANSI/ESD STM3.1-2006 (Note: *1) Decay Time 3 sec. ANSI/ESD STM3.1-2006 (Note: *1) Air Flow Volume 45-90 CFM per fan – Air Flow Coverage 600mm x 600mm x 900mm – Audible Noise High Fan Speed: 55 dB Low Fan Speed: 45 dB (Note:*2) – Ozone Level <0.05 ppm IEC 60335-2-65 ED.2.1 Dimensions 113mm H x 1080mm W x 172mm D – AC Cable Length 1.8 meter – Weight 4 .8 Kg – Certifications and Approvals CE, RoHS(EU) – Warranty 1 Year – *1: High fan speed, measurement taken 45 cm below fan. *2: Measurement taken 100 cm at angle of 45 degrees below fan 3M™ Ionized Air Blower 9300 m 2m 17 mm 80 10 113 mm RoHS Compliant 2011/65/EC 3M is a trademark of 3M Company. Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the products which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Electronic Solutions Division Static Control Products 926 JR Industrial Drive Sanford, NC 27332-9733 Toll-Free: 866-722-3736 International: 919-718-0000 Email: 3mstaticinfo@mmm.com www.3Mstatic.com Please recycle. © 3M 2013. All rights reserved. 78-9101-6701-0