1. shopping
2. resources
3. product reviews

Tools at Height
tools at height
Industry regulations exist to protect people from falling, but no such guidance
exists for protecting individuals from dropped objects, the fourth highest cause of death in the workplace. The Tools at Height program from Snap-on Industrial Brands offers both safety and productivity and uniquely addresses this critical gap. Tools at Height is Snap-on Industrial Brands’ tethered tool program designed for applications that involve work being performed at height and anywhere dropped or lost objects are a concern; the tools are tethered to prevent them from
being dropped. All tools are designed with a tethered system to maintain or enhance the tools’ functionality when used at height or near critical assemblies.
Many applications - any industry where a dropped tool could harm personnel, damage
machinery or cost production time.
High level uses - drilling derricks, wind turbines, cranes, buildings, bridges, masts, power
lines, hangars, scaffold builders
l Low level uses - stop tools dropping onto flight hardware, into engines, machinery, food
production lines, vats, mine shafts, even under water uses
l
If you call it this…
l Foreign Object Damage
l Foreign Material Exclusion
l Drop Mitigation
l Stop Drops
l Working at Heights
2
You need this…the Snap-on Industrial Brands Tools at Height program!
tools at height
Wrench with safety coil - Secure lanyard attachments need to
withstand tough site use, including low temperature, so structural
integrity is critical
l Superior design - no welds to fail
l High performance - made from polished stainless steel, they
have superior flexibility and shock-absorbing qualities over
welded attachments
l Seven sizes available to support wrenches up to 1½” or 55mm
l Slides out of the way along the wrenches handle to provide full
use of the handle and achieve greatest leverage
Rotating screwdriver tabs – tab is located for
secure retention and allow full use of the screwdriver handle
l Stainless steel tab is corrosion resistant
l Tab rotates freely 360° so the lanyard does not
wrap around the users hand
l Nylon bushing has a shoulder so the tab will not
bind between the handle and shank bolster
Pipe wrenches – We pin the tang of the removable
pipe wrench jaw so it cannot become separated from
the handle
Square drive tools and accessories – Square drive
tools are designed and manufactured with spring
loaded lock buttons. The lock button engages with side
lock holes drilled in sockets, extensions, and adaptors
ensuring positive retention.
Snap-on Industrial Brands Tools at Height Program
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
3
tools at height
Snap-on Industrial Brands Tools at Height System
4
lanyards
tools at height
Snap-on Industrial Brands retention system increases safety and productivity wherever tools are used.
Attaching tools to a lanyard or tether can keep them from falling when used in high places, can help prevent
foreign material, and can reduce loss of valuable tools in environments like ocean platforms. Williams
tethers can be used on a wide range of hand tools and cordless power tools. Lanyards can be attached to
wrist, belt, harness or other location based on usage and weight. Be sure to use a lanyard with capacity that
exceeds the weight of the tool you are attaching because drop forces are often greater than the actual tool
weight.
All Retention Systems Are Not Created Equal
Snap-on Industrial Brands uses a stainless steel, screw-locking carabiner connector
while many competitors use aluminum connectors that are not load rated. Snap-on
Industrial Brands also gives you a nylon tether that has a spring inside to absorb
the shock of a dropped tool and built in drop indicator. Lanyards that have been
involved in a drop should be replaced. The drop indicator identifies that for you.
Williams stainless steel carabiner with
screwlocking
connector
Competitive
aluminum
carabiner
Drop indicator
Nylon tether
with spring
WTHWSRET1
WTHCARA15
Tethers, Lanyards, and Carabiners
Stock Number
WTHCARA15
WTHCARA25 **
WTHUNI12
3/4"
Super Coil Personal Duty Tether w/ 2 SST Carabiners
15#
10'
25#
30#
WTHL1
Snap-Hook Tether for Attachment to Safety Coils,
Key Rings, or Cable Loops
12"
5#
WTHL2
Universal Tether with One Snap Hook and One Adjustable Loop
12"
5#
Pin Release Tool for Square Drive Tools
—
—
Tool Pouch with Attachment Points
—
—
46"
6#
10'
12#
46"
15#
WTHPRT
3/4"
Super Coil Personal Duty Tether w/1 SST
Carabiner & 1 Fixed Loop
1" Super Coil Anchor Tool Tether w/1 SST
Carabiner & 1 Fixed Loop
WTHUNI12 **
WTHUNI15
WTHANCHOR
42"
40"
WTHUNI5
WTHTOOLPOUCH
Capacity
1" Super Coil Anchor Nylon Tether w/ 2 SST Carabiners
WTHTOOLPOUCH
WTHUNIRET1
Extension
Length
30lb. Heavy Duty Lanyard with 2 Stainless Steel Carabiners
WTHCARA30
THUNIRET2
Size / Description
3/4"
Super Coil Personal Duty Tether w/1 SST Carabiner
& 1 Fixed Loop
WTHUNIRET1
Personal Duty Retractable Tether w/ Universal Attachment
36"
16 oz.
WTHUNIRET2
Personal Duty Retractable Tether w/ Universal Attachment
42"
32 oz.
Adjustable Wrist Strap with Velcro Closure & D-Ring
—
—
WTHWS1
WTHRET2CLIPS
For RT3 retractor
WTHRET1CLIPS
For RT4 retractor
WTHANCHOR
Anchor Strap
—
25#
WTHWSRET1
Personal Duty Retractable Tether w/ Universal Attachment
and Wrist Strap
36"
16 oz.
** Note: 1" Super Coils are designed to be attached to an anchor point such as a utility bucket or work
platform. Due to length and capacity we do not recommend attaching these to an individual.
WTHPRT
WTHCARA30
WARNING
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
5
tools at height
Dual action “twist and pull
lock” carabiners, featured on Safe
Buckets and Heavy Duty Extensions,
are load rated for 6,700 lbs.
WTHPYTH2L1X72HD
EXTENSIONS
• Third-party tested
• Available in various lengths and materials
• Glove-friendly swivel connection trigger
WTHPYTH2H1X72HD
WTHPYTH2R1X72HD
Standard Double Trigger Extensions
WTHEXT5X12 (0.5" x 12")
WTHEXT5X24 (0.5" x 24")
WTHEXT5X36 (0.5" x 36")
Heavy Duty EXTENSIONS
• Available in various lengths and fastener ends
Hook2Hook Extensions
WTHH2H1X48HD (1" x 48")
WTHH2H1X72HD (1" x 72")
Hook2Loop Extension
WTHH2L1X72HD (1" x 72")
Hook2Rail Extension
WTHQSPMCOL10
WTHQSPMCAP10
WTHH2R1X72HD (1" x 72")
WTHQSPCOIL10
(Pens shown are not
included with adaptors.)
Quick Spins Lanyard Adaptors
• Makes tools and other items tether-ready in seconds
WTHQSPCOIL10 (Pen Holder 10-Pack)
WTHQSPMCOL10 (Permanent Marker Holder 10-Pack)
WTHQSPMCAP10 (Permanent Marker Cap 10-Pack)
6
REPLACEMENT Retractor
• Stainless steel retractor
WTHRET48STEL
tools at height
Elastic Pullaway Wristbands do not
come off when a tool is dropped, but the
operator can “pull out” of the wristband if
needed, making them perfect for use near
rotating equipment.
High quality, load rated carabiners are used
on coil tethers. These feature screw gate closures to
prevent accidental opening. They also feature
Coil-Lock rings that prevent the carabiner from being
separated from the tether. Use this type of tether when
working near heat.
WTHWBL
WTHWBM
WTHWBS
wristbandS
• Control for small hand tools and bump-sensitive work areas
• Versatile without having a separate leash or lanyard
Elastic Pull-away
WTHWBS (Small)
WTHWBM (Medium)
WTHWBL (Large)
Adjustable
WTHWBADJNC (Non-Conductive)
WTHWBADJV (Snap-Vinyl)
WTHWBADJNC
Tools at Height Safety Craft Kits
WTHH2HCOIL
Coil Tether EXTENSIONS
• S tays out of the way when not needed
• S tainless steel braiding coated in a wipeable vinyl
• Certified, load-rated carabiners
• Performs extremely well around heat
WTHH2HCOIL
WTHH2QR17
• For use with longer-handled tools
• Pictured with WTHHOLHAMMER
Craft Kits are designed with practicality in
mind. They provide an easy, cost effective
approach to outfitting the individual
craftsman with products derived from
our extensive field experience. (Tools sold
separately)
WTHKITIRON
(Iron Craft Kit)
WTHKITTURBIN
(Turbine Craft Kit)
WTHKITSCAFF
(Scaffold Craft Kit)
WTHKITMAINT
(Maintenance Craft Kit)
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
7
tools at height
TOOL HOLSTERS designed with built-in attachment
points or retractors. That means the tools are tethered to
the holster at all times so the risk of dropping a tool while
transferring from bag to lanyard is eliminated. It also means
the system is completely modular and can be arranged in
any order on a tool belt or climbing harness based on the
user’s preference. Several holsters also feature hook and
loop flaps that secure the tool while being transported.
Holsters Used on Tool Belts
WTHHOLBOXBR (Box Wrench w/Retractor)
WTHHOLHAMMER (Hammer)
WTHHOLSCAFB (Scaffold Wrench w/Bungee)
WTHHOLTAPEBR (Tape Measure w/Retractor)
WTHHOL1BR (Single Tool w/Retractor)
WTHHOL2B (Dual Tool)
WTHHOL2BR (Dual Tool w/Retractor)
WTHHOL1HR
WTHHOL2B
WTHHOLBOXBR
(Tools shown are not
included with holsters.)
Holsters Used on Climbing Harnesses
WTHHOLTAPEBR
WTHHOLSCAFB
WTHHOLBOXHR (Box Wrench w/Retractor)
WTHHOL1HR (Single Tool w/Retractor)
WTHHOL2H (Dual Tool)
WTHHOL2HR (Dual Tool w/Retractor)
WTHHOLHAMMER
WTHLOOPTRSNA
(Shown with WTHH2QR17
tether extension
sold separately -
LOOP ATTACHMENT FOR
TOOL BELTS
• Loop with trigger snap attachment
WTHLOOPTRSNA
COMFORT TOOLBELTS
TOOLBELTS
• One-size-fits-all solution
• Available with metal or non-conductive trigger sn
• Compatible with Python® Safety holsters and tool
pouches
WTHYTBELT2ADJ (Double Adjust)
WTHBELTTRIG (with Trigger Snaps)
WTHBELTTRIG
8
WHTBELT2ADJ
• Tool belt availablae in 6 sizes
WTHBELTCFTS - Small, 28” - 32”
WTHBELTCFTM - Medium 32” - 36”
WTHBELTCFTL - Large 36” - 40”
WTHBELTCFTXL - X-Large 40” - 44”
WTHBELTCFT2XL - X-Large 44” - 48”
WTHBELTCFT3XL - X-Large 48” - 52”
tools at height
WHTPCHPARTXD-CB
WHTPCHPARTCL
WHTPCH1RET2P
SMALL PARTS POUCHES
• S tops accidental drops the moment something is put inside
• I nnovative self-closure system makes it nearly impossible for objects
to fall out of pouch
•E
asy "reach-in" retrieval, no opening or closing necessary
WTHPCHPARTXD-CB (Extra Deep)
WTHPCHPARTCL - Top closure, leg strap and 10 lb weight capacity
WTHPCH1RET2P - Single retractor, dual pockets and 10 lb weight
capacity
WHTPCHTRIG
WHTPCHDR
WHTPYTPCHRET
Tool Pouches
• Th
e ultimate flexibility in tool and parts control
• Built to withstand the harshest of work environments
• Reinforced bottom with belt attachment
WTHPCHTRIG (with Triggers)
WTHPCHDR (with D-Ring)
WTHPCHRET (with Retractors)
WTHPCHNAIL (Nail Pouch)
Safe Buckets
• Built-in "hook & loop" system perfect for spill control
• Third party load rated at either 100 or 250 lbs.
• Strong composite bottom prevents piercing
• Multiple built-in 1" D-Ring attachments
with 12" extensions for easy tethering
WTHBKT100HLC-L (100 lb. Canvas)
WTHBKT250HDL-L (250 lb. Durahide)
Scaffold Pole Buckets
• Transport scaffolding safe and easy
• Break-resistant, high-impact polymer bottoms
• Heavy-duty double-box "X" stitching
WTHBKT48SCAF (48")
WTHBKT72SCAF (72")
WTHBKT120SCA (120")
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
9
Wrenches
tools at height
SUPERCOMBO® Combination Wrenches
High Polish Chrome and Satin Chrome Finish, 12 Point, SAE
Product Code
1208SC-TH +
1210SC-TH +
1212SC-TH ++
1214SC-TH ++
1216SC-TH ++
1218SC -TH ++
1220SC -TH ++
1222SC -TH ++
1224SC-TH ++
1226SC-TH ++
1228SC-TH ++
1230SC -TH ++
1232SC-TH ++
1234SC -TH ++
1236SC-TH ++
1240SC -TH ++
1242-TH **
1244 -TH **
1246-TH **
1248-TH **
1180-TH **
1182-TH **
1184-TH **
Size (Inches)
1⁄4
5⁄16
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
1
1 1⁄16
1 1⁄8
1 1⁄4
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
1 5⁄8
1 11⁄16
1 3⁄4
A
Overall
Length
(Inches)
4 1⁄4
5 3⁄4
6 1⁄2
7 1⁄4
8
8 3⁄4
9 1⁄2
10 1⁄4
11
11 3⁄4
12 1⁄2
13 1⁄4
14
14 3⁄4
15 1⁄2
17
17 3⁄4
18 1⁄2
19 1⁄4
20 1⁄32
21 1⁄2
22 9⁄32
22 7⁄8
B
C
Open End Width Open End Thick(Inches)
ness (Inches)
9⁄16
1⁄ 8
11⁄16
5⁄32
13⁄16
3⁄16
15⁄16
7⁄32
1⁄4
1 1⁄16
1⁄4
1 1⁄4
9⁄32
1 3⁄8
5⁄16
1 1⁄2
5⁄16
1 5⁄8
3⁄8
1 3⁄4
13⁄32
1 7⁄8
7⁄16
2
15⁄32
2 1⁄8
1⁄2
2 1⁄4
17⁄32
2 13⁄32
9⁄16
2 21⁄32
19⁄32
2 13⁄16
5⁄8
2 15⁄16
5⁄8
3 1⁄16
11⁄16
3 3⁄16
11⁄16
3 5⁄16
23⁄32
3 7⁄16
23⁄32
3 9⁄16
D
Box End
Diameter
(Inches)
13⁄32
1⁄ 2
9⁄16
11⁄16
3⁄4
7⁄8
15⁄16
1 1⁄32
1 1⁄8
1 7⁄32
1 5⁄16
1 3⁄8
1 15⁄32
1 9⁄16
1 21⁄32
1 13⁄16
1 29⁄32
2
2 3⁄32
2 3⁄16
2 11⁄32
2 7⁄16
2 17⁄32
E
Box End
Thickness
(Inches)
3⁄16
7⁄32
1⁄ 4
9⁄32
11⁄32
3⁄8
13⁄32
7⁄16
1⁄2
17⁄32
9⁄16
19⁄32
5⁄8
21⁄32
11⁄16
3⁄4
3⁄4
3⁄4
7⁄8
7⁄8
7⁄8
7⁄8
1 1⁄32
Weight
(lbs)
0.04
0.08
0.12
0.17
0.23
0.31
0.43
0.51
0.62
0.79
0.96
1.20
1.48
1.65
1.94
2.58
2.96
3.45
3.85
4.29
3.70
5.22
5.62
Grooves in the
SUPERCOMBO® open
ends direct wrench force away
from fastener corners.
1222SC-TH
1180-TH
+ High Polish Chrome Finish with SUPERTORQUE® Box End.
++ High Polish Chrome Finish with SUPERCOMBO® Open End and SUPERTORQUE® Box End.
** Satin Chrome Finish with SUPERTORQUE® Box End and Standard Open End.
* Satin Chrome Finish with Standard Open and Box Ends.
Fed. Spec.: ANSI B107.6; SAE AS 954
Features
• SUPERCOMBO® open end has specially designed grooves that direct wrench force away from
fastener corners.
• SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points.
• Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to
provide accurate torque/tension relationship for precision application.
• May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase
both hand tool flexibility and economy.
• Box and open end openings are identical.
SUPERTORQUE® box opening design
allows higher torque
without rounding or deforming fastener
corners by placing wrenching forces on
the flat surfaces rather than the points.
!
10
10
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Wrenches
tools at height
M
SUPERCOMBO® Combination Wrenches
High Polish Chrome Finish, 12 Point, Metric
Grooves in the
SUPERCOMBO® open
ends direct wrench force away
from fastener corners.
Product Code
1207MSC-TH ++
1208MSC-TH ++
1209MSC-TH ++
1210MSC-TH ++
1211MSC-TH ++
1212MSC-TH ++
1213MSC-TH ++
1214MSC-TH ++
1215MSC-TH ++
1216MSC-TH ++
1217MSC-TH ++
1218MSC-TH ++
1219MSC-TH ++
1220MSC-TH ++
1221MSC-TH ++
1222MSC-TH ++
1223MSC-TH ++
1224MSC-TH ++
1225MSC-TH ++
1226MSC-TH +
1227MSC-TH +
1230MSC-TH +
1232MSC-TH +
1234MSC-TH +
1236MSC -TH +
Size (Inches)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
30
32
34
36
A
Overall
Length
(Inches)
5 5⁄16
5 25⁄32
6 9⁄32
6 3⁄4
7 1⁄4
7 11⁄16
8 1⁄32
8 5⁄8
9 3⁄32
9 1⁄2
10 1⁄16
10 17⁄32
11 1⁄32
11 1⁄2
11 25⁄32
12 1⁄2
12 7⁄8
13 9⁄32
14 1⁄32
14 5⁄16
14 25⁄32
16 9⁄32
17 1⁄32
17 25⁄32
19 9⁄32
B
C
Open End Width Open End Thick(Inches)
ness (Inches)
5⁄8
5⁄32
23⁄32
5⁄32
13⁄16
3⁄16
7⁄8
3⁄16
31⁄32
7⁄32
7⁄32
1 1⁄32
1⁄4
1 1⁄8
1⁄4
1 7⁄32
9⁄32
1 9⁄32
9⁄32
1 3⁄8
5⁄16
1 15⁄32
5⁄16
1 17⁄32
11⁄32
1 5⁄8
3⁄8
1 23⁄32
3⁄8
1 3⁄4
13⁄32
1 29⁄32
7⁄16
1 31⁄32
7⁄16
2
15⁄32
2 5⁄32
1⁄2
2 3⁄16
1⁄2
2 9⁄32
17⁄32
2 17⁄32
9⁄16
2 11⁄16
19⁄32
2 13⁄16
21⁄32
3 1⁄16
D
Box End
Diameter
(Inches)
15⁄32
1⁄ 2
9⁄16
5⁄ 8
11⁄16
3⁄ 4
25⁄32
27⁄32
29⁄32
15⁄16
1
1 1⁄16
1 1⁄8
1 3⁄16
1 7⁄32
1 5⁄16
1 11⁄32
1 3⁄8
1 15⁄32
1 1⁄2
1 9⁄16
1 3⁄4
1 13⁄16
1 29⁄32
2 3⁄32
E
Box End
Thickness
(Inches)
7⁄32
7⁄32
1⁄ 4
9⁄32
5⁄16
5⁄16
11⁄32
3⁄8
13⁄32
13⁄32
7⁄16
15⁄32
1⁄2
1⁄2
17⁄32
9⁄16
9⁄16
19⁄32
5⁄8
21⁄32
11⁄16
3⁄4
3⁄4
3⁄4
7⁄8
Weight
(lbs)
0.06
0.08
0.10
0.13
0.18
0.20
0.23
0.32
0.35
0.41
0.47
0.56
0.67
0.77
0.82
1.08
1.08
1.20
1.49
1.51
1.64
2.30
2.76
2.92
3.86
+ High Polish Chrome Finish with SUPERTORQUE® Box End
++ High Polish Chrome Finish with SUPERCOMBO® Open End and SUPERTORQUE® Box End
Fed. Spec.: ANSI B107.6; SAE AS 954
SUPERTORQUE® box opening design
allows higher torque
without rounding or deforming fastener
corners by placing wrenching forces on
the flat surfaces rather than the points.
Features
• SUPERCOMBO® open end has specially designed grooves that direct wrench force away from
fastener corners.
• SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is
made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points.
• Meets or exceeds aerospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application.
• May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both
hand tool flexibility and economy.
• Box and open end openings are identical.
1215MSC-TH
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
11
Wrenches
tools at height
M
Reversible Ratcheting Combination Wrenches
High Polish Chrome Finish, 12 Point, Metric
Product Code
1208MRC-TH
1209MRC-TH
1210MRC-TH
1211MRC-TH
1212MRC-TH
1213MRC-TH
1214MRC-TH
1215MRC-TH
1216MRC-TH
1217MRC-TH
1218MRC-TH
1219MRC-TH
Size (Inches)
8
9
10
11
12
13
14
15
16
17
18
19
A
Overall
Length
(Inches)
5 1⁄4
5 7⁄8
6 1⁄4
6 5⁄8
6 13⁄16
7
7 3⁄8
7 3⁄4
8 3⁄16
9
9 3⁄8
9 3⁄4
B
C
Open End Width Open End Thick(Inches)
ness (Inches)
23⁄32
3⁄16
13⁄16
5⁄32
7⁄8
7⁄32
15⁄16
7⁄32
7⁄32
1
1⁄4
1 1⁄32
1⁄4
1 3⁄16
9⁄32
1 1⁄4
9⁄32
1 11⁄32
9⁄32
1 7⁄16
5⁄16
1 17⁄32
11⁄32
1 17⁄32
D
Box End
Diameter
(Inches)
23⁄32
25⁄32
7⁄ 8
29⁄32
31⁄32
1
1 3⁄32
5
1 ⁄32
1 7⁄32
1 9⁄32
1 3⁄8
1 7⁄16
E
Box End
Thickness
(Inches)
9⁄32
5⁄16
11⁄32
11⁄32
3⁄8
13⁄32
13⁄32
7⁄16
7⁄16
1⁄2
15⁄32
17⁄32
Weight
(lbs)
0.08
0.14
0.15
0.22
0.00
0.36
0.42
0.56
0.77
0.93
1.15
1.33
D
Box End
Diameter
(Inches)
E
Box End
Thickness
(Inches)
Weight
(lbs)
⁄
⁄
29⁄32
1
1 3⁄32
1 7⁄32
1 11⁄16
1 15⁄32
1 9⁄16
1 21⁄32
1 27⁄32
1 7⁄8
⁄
⁄
11⁄32
13⁄32
13⁄32
7⁄16
1⁄2
17⁄32
17⁄32
19⁄32
5⁄8
5⁄8
0.08
0.10
0.13
0.16
0.18
0.00
0.27
0.00
0.36
0.44
0.50
0.56
Features
• High-polished chrome finish cleans easily.
• Ratchet lever is easily accessible for quick direction changes.
• Recessed corners in ends provide extra turning power.
Reversible Ratcheting Combination Wrenches
High Polish Chrome Finish, 12 Point, SAE
Product Code
1210RC-TH
1212RC-TH
1214RC-TH
1216RC-TH
1218RC-TH
1220RC-TH
1222RC-TH
1224RC-TH
1226RC-TH
1228RC-TH
1230RC-TH
1232RC-TH
Size (Inches)
A
Overall
Length
(Inches)
⁄
⁄
7⁄16
1⁄2
9⁄16
5⁄8
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
1
5 1⁄4
6 1⁄4
6 5⁄8
7
7 3⁄8
8 7⁄32
9
9 3⁄4
10 1⁄2
11 13⁄32
12
13
5 16
38
B
C
Open End Width Open End Thick(Inches)
ness (Inches)
⁄
⁄
15⁄16
1 1⁄32
1 3⁄16
1 11⁄32
1 7⁄16
1 17⁄32
1 23⁄32
1 7⁄8
1 31⁄32
2 3⁄32
23 32
78
⁄
⁄
7⁄32
1⁄4
1⁄4
9⁄32
9⁄32
11⁄32
3⁄8
11⁄32
15⁄32
15⁄32
5 32
3 16
23 32
78
Features
• High-polished chrome finish cleans easily.
• Ratchet lever is easily accessible for quick direction changes.
• Recessed corners in ends provide extra turning power.
!
12
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
9 32
5 16
Wrenches
tools at height
15°- 60° Double Open End Angle-Head Wrenches
Chrome Satin Finish, SAE
Product Code
Size
(Inches)
A
Head
Diameter
B
Head
Thickness
C
Overall Length
(Inches)
Weight (lbs)
3716-TH
3718-TH
3720-TH
3722-TH
3724-TH
3726-TH
3728-TH
3732-TH
3734-TH
3736-TH
3740-TH
3744-TH
3746-TH
3748-TH
⁄2
⁄16
5
⁄8
11
⁄16
3
⁄4
13
⁄16
7
⁄8
1
1 1⁄16
1 1⁄8
1 1⁄4
1 3⁄8
1 7⁄16
1 1⁄2
1
1 1⁄8
1 3⁄16
1 5⁄16
1 7⁄16
1 19⁄32
1 21⁄32
1 15⁄16
2 1⁄16
2 1⁄4
2 3⁄8
2 11⁄16
2 11⁄16
2 11⁄16
⁄32
⁄4
9
⁄32
9
⁄32
9
⁄32
9
⁄32
9
⁄32
5
⁄16
5
⁄16
5
⁄16
11
⁄32
13
⁄32
13
⁄32
13
⁄32
5 1⁄2
6
6 1⁄4
7
7 1⁄4
7 1⁄2
8 1⁄4
9 3⁄4
10
11
11 1⁄2
12 1⁄2
12 1⁄2
12 1⁄2
0.10
0.14
0.14
0.21
0.28
0.27
0.35
0.41
0.50
0.61
0.70
0.85
1.25
1.19
1
9
7
1
Fed. Spec. ANSI B107.39 Type 2 Class 3
Features
•
•
•
•
•
•
Wrench heads are offset at 15° and 60° to the handle
Both ends are the same size to permit the wrench to be used in four different positions
45° chamfer on wrench ends allow easy placement of wrench on the fastener
Continuous arc design minimizes spreading and is stronger than “V” design
Thin head is perfect for tight clearances
Satin chrome finish provides good grip and cleans easily
Double Head 10° Offset Box End Wrenches
Chrome Satin Finish, 12 Point, SAE
Product Code Size (Inches)
3⁄8 x 7⁄16
7723-TH
1⁄2 x 9⁄16
7725B-TH
5⁄8 x 11⁄16
7727A-TH
11⁄16 x 3⁄4
7029B-TH
3⁄4 x 7⁄8
7731A-TH
13⁄16 x 7⁄8
7731B-TH
15⁄16 x 1
7033C-TH
7038-TH
1 1⁄8 x 1 3⁄16
7039B-TH
1 1⁄4 x 1 5⁄16
A
Overall
Length
(Inches)
75⁄8
8 11⁄16
10 5⁄32
10 15⁄16
12 1⁄32
12 13⁄32
14 1⁄8
16 3⁄32
17 5⁄8
B
Box End
Diameter
(Inches)
19⁄32
3⁄ 4
29⁄32
1
1 3⁄32
3
1 ⁄16
1 11⁄32
1 19⁄32
1 25⁄32
C
Box End
Thickness
(Inches)
5⁄16
3⁄ 8
7⁄16
15⁄32
1⁄ 2
17⁄32
19⁄32
11⁄16
23⁄32
D
Box End
Diameter
(Inches)
21⁄32
27⁄32
1
1 3⁄32
1 1⁄4
1 1⁄4
1 7⁄16
1 11⁄16
1 27⁄32
E
Box End
Thickness
(Inches)
11⁄32
3⁄8
15⁄32
1⁄2
9⁄16
9⁄16
5⁄8
11⁄16
3⁄4
Weight (lbs)
0.11
0.30
0.47
0.53
0.73
0.80
0.94
1.66
0.00
Fed. Spec. ANSI B107.6
Features
• SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind
the points.
• 10° offset box end allows clearance in tight areas.
• Sizes are clearly marked on handle ends.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
13
Wrenches
tools at height
M
Double Head 10° Offset Box End Wrenches
Chrome Satin Finish, 12 Point, Metric
Product Code
BWM-0810-TH
Size (MM)
8 x 10
A
Overall
Length
(Inches)
7 5⁄16
B
Box End
Diameter
(Inches)
1⁄2
C
Box End
Thickness
(Inches)
9⁄32
D
Box End
Diameter
(Inches)
19⁄32
E
Box End
Thickness
(Inches)
5⁄16
Weight
(lbs)
0.15
BMW-0810-TH
Fed. Spec. ANSI B107.9M
Features
• SUPERTORQUE® box opening design allows application of higher torque without
rounding or deforming hex fastener points. No contact is made at the corners.
Instead, wrenching forces are placed on the flat surfaces behind the points.
• 10° offset box end allows clearance in tight areas.
• Sizes are clearly marked on handle ends.
Double Head Flare Nut Wrenches
Chrome Satin Finish, 6 Point, SAE
Product
Code
Size
(Inches)
A
Overall
Length
(Inches)
XFN-1214-TH
XFN-1618-TH
XFN-2022-TH
XFN-2432-TH
XFN-2836-TH
⁄x⁄
⁄x⁄
⁄x ⁄
3⁄4 x 1
7⁄8 x 1 1⁄8
5 13/16
6 13/16
7 3/4
9 1/2
10.5
3 8 7 16
1 2 9 16
5 8 11 16
B
Open End
Dia
(Inches)
C
Open End Thickness
(Inches)
D
Open End
Dia
(Inches)
E
Open End Thickness
(Inches)
Weight
(lbs)
⁄
/
1/
1 1/4
1 7/16
/
/
7/16
1/2
9/16
/
1
3/16
19/32
1 3/4
11 32
13 32
/
/
/
/
11/16
0.14
0.23
0.38
0.70
0.99
25 32
15 16
3 32
5 16
3 8
27 32
15 32
5 8
Fed. Spec.: ANSI B107.6
WS-14-TH 5 Piece Double Head Flare Nut Wrench Set, 6 Point, SAE, in Roll Pouch – R-4 2.71 lbs
Contents Include:
Product Code
XFN-1214-TH
XFN-1618-TH
Size (Inches)
3⁄8 x 7⁄16
1⁄2 x 9⁄16
Product Code
XFN-2022-TH
XFN-2432-TH
Size (Inches)
5⁄8 x 11⁄16
3⁄4 x 1
Product Code
XFN-2836-TH
Size (Inches)
7⁄8 x 1 1⁄8
Features
• Will not mar fittings on pipes and tubing.
• Satin chrome textured finish provides great feel and extra gripping power.
• Recessed corners in ends provide extra turning power.
WS-14-TH
!
14
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Wrenches
tools at height
Adjustable Construction Wrench
Heavy-Duty With Polished Head and Measurement Scales 2.24 lbs
Length
(Inches)
15
Product Code
13625-TH
13625-TH
Maximum Jaw
Opening (Inches)
1 1⁄2
Head Thickness
(Inches)
23⁄32
Features
•
•
•
•
Tapered spud handle locates and aligns bolts and rivets.
Hole in handle permits tethering wrench for safety.
Measurement scale on head conveniently shows fastener size.
Economical black phosphate finish resists rust.
M
Double Head Flare Nut Wrenches
Chrome Satin Finish, 6 Point, Metric
Product
Code
10650-TH
10652-TH
10654-TH
10656-TH
10658-TH
Size
(MM)
9 x 11
10 x 12
13 x 14
15 x 17
19 x 21
A
Overall
Length
(Inches)
5 11⁄16
6 1⁄8
6 7⁄8
7 7⁄8
8 7⁄8
B
Open End
Dia
(Inches)
13/16
7/8
1
1 1/16
9
1 /32
C
Open End
Thickness
(Inches)
11/32
3/ 8
3/8
7/16
1/ 2
D
Open End
Dia
(Inches)
15/16
29/32
1 3/32
1 7/32
1 13/32
E
Open End
Thickness
(Inches) Weight (lbs)
5/16
0.11
5/16
0.15
3/8
0.20
1/2
0.28
17/32
0.43
Fed. Spec.: ANSI B107.9M
11692-TH 5 Piece Double Head Flare Nut Wrench Set,
6 Point, Metric, in Vinyl Pouch – 50001 1.43 lbs.
Contents Include:
Product Code
10650-TH
10652-TH
11692-TH
Size (MM)
9 x 11
10 x 12
Product Code
10654-TH
10656-TH
Size (MM)
13 x 14
15 x 17
Product Code
10658-TH
Size (MM)
19 x 21
Features
• Will not damage fittings on pipes and tubing.
• Satin chrome textured finish provides great feel and extra gripping power.
• Recessed corners in ends provide extra turning power.
M
Folding Hex Key Sets
SAE and Metric
Product Code
Number of
Pieces
Weight (lbs)
MWS-47-TH
WS-46-TH
MWS-47-TH
9
.47
Hex Size
Key Length
(Inches)
(Inches)
5⁄64
11⁄2
3⁄32
19⁄16
7⁄64
111⁄16
1⁄8
115⁄16
9⁄64
2
5⁄32
21⁄4
3⁄16
21⁄2
7⁄32
25⁄8
1⁄4
27⁄8
7
.30
Includes Hex Key Length
Size (MM)
(Inches)
1.5
13⁄8
2
11⁄2
2.5
15⁄8
3
13⁄4
4
2
5
21⁄4
6
21⁄2
Features
• Steel case is chrome plated to resist corrosion.
• Keys are black oxide finish.
• Convenient item for pocket or tool box.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
15
torque Wrench
tools at height
Metal Handle Click Type Torque Wrenches - DUAL SCALE
Metal Handle Dual Scale. The metal handle series offers the user a rugged, industrial strength torque
wrench able to withstand the rigors of professional use. Handles are lightly knurled for a tough, nonslip grip. There are 21 models of metal handle micrometer adjustable torque wrenches available.
Features
• Dual scale, calibrated dual direction
• Positive lock with spring loaded pull down lock ring
• Fast, accurate and easy to set
• Easy-to-read laser marked scales
• Most feature quick release buttons which provide good socket retention as well as easy socket removal
• Accuracy: ± 3% CW ± 4% CCW of indicated value, CW, from 20% to 100% of full scale
• Individually serialized with matching certificate of calibration traceable to N.I.S.T.
Metal Handle Click Type Torque Wrenches - DUAL SCALE
Product Code
DriveEnglish
Size Range
Incr.
Nm
Range
Incr.
A
In.
B
In.
C
In.
D
In.
2503MFRMH-TH
1
⁄2”
47 - 332 Nm
24.40
1.70
1.40
1.40 4.73
30-250 ft. lb.
1
1.4
Wt.
Lbs.
2503MFRMH-TH
• Our mission is to deliver the best possible solution for
Safety, FOD, and FME problems. We address the issues, but
don’t compromise the functionality of the tools.
• Snap-on Industrial Brands FOD-compliant and Retention
System tools are delivered ready-to-use.
• We offer a wide selection of hand and power tools that are
ready to tether, and the lanyards and carabiners required to
safely attach them to a fixture (tools over five pounds) or
operator (tools under five pounds).
• Snap-on Industrial Brands Tools at Height ratchets and
accessories feature a pin which mates with the socket hole
for positive retention.
!
16
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Sockets &
Drive Tools
tools at height
1/4" Drive Enclosed Head Ratchets
Sealed Narrow Head Design, Chrome and Black Industrial Finish
Product Code
M-52EHA-TH
MB-52EHA-TH
Description
Chrome Finish Enclosed Head Ratchet
Black Industrial Finish Enclosed Head Ratchet
Length (Inches)
5 1/4
5 1/4
Number of Teeth Weight (lbs)
36
0.00
36
0.21
Fed. Spec: ANSI B107.10M
Features
MB-523HA-TH
• Enclosed head is sealed to prevent dust, dirt, and liquids from
entering head, preserving internal lubrication.
• Forged one-piece ratchet provide strength and safety for industrial applications.
• 36 tooth gear with 10 degree of engagement allows engagement in tight working areas.
• Nickel/Chrome plating provides increase protection from rust and corrosion.
• Chrome finish models feature mirror-like exterior that can be easily cleaned after each use.
• Single Pawl ratchet design:
•Designed for tighter tolerances between pawl and gear which reduces metal fatigue
and slippage under load.
•Does not require as many working parts, reducing possible breakage and parts to repair.
• Easy access reverse lever allows user to change working direction quickly and easily with only one
hand.
1/4" Drive Standard Length Hex Bit Sockets, SAE
High-Polished Chrome Finish
Product Code
35000-TH
35001-TH
35002-TH
35003-TH
35004-TH
35005-TH
30902-TH
Size
(Inches)
1⁄8
5⁄32
3⁄16
7⁄32
1⁄4
5⁄16
Socket Outside
Diameter
(Inches)
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
Socket Length
(Inches)
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
Overall Length
(Inches)
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
30902-TH 6 Piece Hex Bit Socket Set on Clip Rail .51 lbs
Contents Include:
Product Code
35000-TH
35001-TH
Features
Size (Inches)
1⁄8
5⁄32
Product Code
35002-TH
35003-TH
Size (Inches) Product Code
3⁄16
35004-TH
7⁄32
35005-TH
Bit Length
(Inches)
5⁄8
5⁄8
5⁄8
5⁄8
5⁄8
5⁄8
Weight (lbs)
0.04
0.04
0.04
0.04
0.04
0.04
Size (Inches)
1⁄4
5⁄16
• High-polished chrome finish socket cleans easily.
M
1/4" Drive Standard Length Hex Bit Sockets, Metric
High-Polished Chrome Finish
35072-TH
The lock button engages with
specially engineered side holes
drilled in sockets, extensions and
adaptors ensuring positive retention.
Product Code
35070-TH
35071-TH
35072-TH
35073-TH
35074-TH
35075-TH
Size
(MM)
3
4
5
6
7
8
Socket Length
(Inches)
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
13⁄16
Socket Outside
Diameter
(Inches)
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
Overall Length
(Inches)
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
1 13⁄32
30904-TH 6 Piece Hex Bit Socket Set on Clip Rail .51 lbs
Contents Include:
Product Code
35070-TH
35071-TH
Features
Size (MM)
3
4
Product Code
35072-TH
35073-TH
Size (MM)
5
6
Product Code
35074-TH
35075-TH
Bit Length
(Inches)
5⁄8
5⁄8
5⁄8
5⁄8
5⁄8
5⁄8
Weight (lbs)
0.04
0.04
0.04
0.04
0.04
0.04
Size (MM)
7
8
• High-polished chrome finish socket cleans easily.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
17
Sockets &
Drive Tools
tools at height
3/8" Drive Enclosed Head Ratchets
Williams® Sealed Narrow Head Design,
Chrome and Black Industrial Finish
Product Code
Description
Length
(Inches)
Number of Teeth
Weight (lbs)
BB-52EHA-TH
Black Industrial Finish Enclosed Head Ratchet
8
36
.76
Fed. Spec: ANSI B107.10M
Features
• Enclosed head is sealed to prevent dust, dirt, and liquids from entering head,
preserving internal lubrication.
• Forged one-piece ratchet provide strength and safety for industrial applications.
• Smooth comfort-grip handle permits all-day use without gloves.
• 36 tooth gear with 10 degree of engagement allows engagement in tight working areas.
• Nickel/Chrome plating provides increase protection from rust and corrosion.
• Chrome finish models feature mirror-like exterior that can be easily cleaned after each use.
• Single Pawl ratchet design:
• 1) Designed for tighter tolerances between pawl and gear which reduces metal fatigue and slippage under load.
• 2) Does not require as many working parts, reducing possible breakage and parts to repair.
• Easy access reverse lever allows user to change working direction quickly and easily with only one hand.
BB-52EHA-TH
3/8" Drive Extensions and Accessories
High-Polished Chrome Finish
Product Code
Description
Length (Inches)
Weight (lbs)
B-118-TH
Extension
18
.93
Fed. Spec: ANSI B107.10M
Features
•
•
•
•
Chrome plating provides increased protection from rust and corrosion.
Flexible extension is designed for low torque applications in limited access areas.
Ball and spring socket retention.
Spinner disk is ideal for fast turn down of fasteners.
!
18
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
B-118-TH
The lock button engages with
specially engineered side holes
drilled in sockets, extensions and
adaptors ensuring positive retention.
Sockets &
Drive Tools
tools at height
3/8" Drive Deep Sockets, 12 Point, SAE
High-Polished Chrome Finish
A
Product
Size
OAL
Code
(Inches) (Inches)
BD-1208-TH 1⁄4
2 1⁄8
BD-1210-TH 5⁄16
2 1⁄8
BD-1212-TH 3⁄8
2 1⁄8
BD-1214-TH 7⁄16
2 1⁄8
BD-1216-TH 1⁄2
2 1⁄8
BD-1218-TH 9⁄16
2 3⁄8
BD-1220-TH 5⁄8
2 3⁄8
BD-1222-TH 11⁄16
2 5⁄8
BD-1224-TH 3⁄4
2 5⁄8
BD-1226-TH 13⁄16
2 3⁄4
BD-1228-TH 7⁄8
2 3⁄4
BD-1230-TH 15⁄16
2 3⁄4
BD-1232-TH
1
2 3⁄4
B
Drive End
Diameter
(Inches)
11⁄16
11⁄16
11⁄16
11⁄16
23⁄32
25⁄32
27⁄32
15⁄16
1
1 1⁄16
1 5⁄32
1 1⁄4
1 5⁄16
C
Working End
Diameter
(Inches)
13⁄32
15⁄32
9⁄16
5⁄ 8
23⁄32
25⁄32
27⁄32
15⁄16
1
1 1⁄16
1 5⁄32
1 1⁄4
1 5⁄16
D
Broach
Depth
(Inches)
7⁄32
1⁄ 4
9⁄32
9⁄32
11⁄32
9⁄16
19⁄32
5⁄ 8
21⁄32
11⁄16
3⁄ 4
13⁄16
27⁄32
E
Bolt Clearance Depth
(Inches)
1 11⁄16
1 11⁄16
1 11⁄16
1 11⁄16
1 11⁄32
1 9⁄16
1 9⁄16
1 11⁄16
1 11⁄16
2 1⁄32
2 1⁄32
2 1⁄32
2
Bolt Clearance
Diameter
(Inches)
7⁄32
5⁄16
3⁄ 8
7⁄16
15⁄32
17⁄32
19⁄32
21⁄32
23⁄32
25⁄32
27⁄32
27⁄32
31⁄32
F
Nose
Length Weight
(Inches) (lbs)
1 5⁄8
0.07
1 5⁄8
0.08
1 5⁄8
0.10
1 5⁄8
0.11
0.13
0.17
0.19
0.26
0.30
0.31
0.42
0.49
0.48
Features
The lock button engages with
specially engineered side holes
drilled in sockets, extensions and
adaptors ensuring positive retention.
• SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
• Designed for quick engagement on both 6 and 12 point fasteners.
Drop indicator
Nylon tether
with spring
• Our mission is to deliver the best possible solution for
Safety, FOD, and FME problems. We address the issues, but
don’t compromise the functionality of the tools.
• Snap-on Industrial Brands FOD-compliant and Retention
System tools are delivered ready-to-use.
• We offer a wide selection of hand and power tools that are
ready to tether, and the lanyards and carabiners required to
safely attach them to a fixture (tools over five pounds) or
operator (tools under five pounds).
• Snap-on Industrial Brands Tools at Height ratchets and
accessories feature a pin which mates with the socket hole
for positive retention.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
19
Sockets &
Drive Tools
tools at height
3/8" Drive Shallow Impact Sockets, 6 Point, SAE
Black Industrial Finish
Product
Code
2-608
2-610
2-612
2-614
2-616
2-618
2-620
2-622
2-624
2-626
2-628
2-630
2-632
Size
(Inches)
1⁄4
5⁄16
3
⁄8
7
⁄16
1
⁄2
9⁄16
5
⁄8
11
⁄16
3⁄4
13⁄16
7⁄8
15⁄16
1
A
OAL
(Inches)
1 1⁄32
1 1⁄32
1 1⁄32
1 1⁄16
1 1⁄16
1 3⁄32
1 1⁄8
1 5⁄32
1 3⁄16
1 1⁄4
1 9⁄32
1 5⁄16
1 5⁄16
B
Drive End
Diameter
(Inches)
11
⁄16
11
⁄16
11
⁄16
11
⁄16
3
⁄4
13
⁄16
29
⁄32
31
⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 9⁄32
1 11⁄32
C
Working End
Diameter
(Inches)
1
⁄2
1
⁄2
5
⁄8
21
⁄32
3
⁄4
13
⁄16
29
⁄32
31
⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 9⁄32
1 11⁄32
D
Broach
Depth
(Inches)
7
⁄32
1
⁄4
9
⁄32
9
⁄32
5
⁄16
9
⁄16
19
⁄32
19
⁄32
21⁄32
11⁄16
3⁄4
25⁄32
25⁄32
E
Bolt Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
9
7
⁄16
⁄32
9
9
⁄16
⁄32
9
11
⁄16
⁄32
19
11
⁄32
⁄32
19
3
⁄32
⁄8
19
17
⁄32
⁄32
5
5
⁄8
⁄8
5
21
⁄8
⁄32
11⁄16
23⁄32
23⁄32
25⁄32
3⁄4
27⁄32
13⁄16
29⁄32
25⁄32
31⁄32
F
Nose
Length
(Inches)
17
⁄32
17
⁄32
17
⁄32
-
Weight (lbs)
0.06
0.05
0.11
0.06
0.09
0.12
0.12
0.13
0.17
0.20
0.30
0.26
0.30
2-618
2-608
Fed. Spec: ANSI B107.2
WS-2-8 8 Piece 3/8" Drive Shallow 6 Point Impact Socket Set on Clip Rail - 1.02 lbs
Contents Include:
Product Code
2-610
2-612
2-614
2-616
Size (Inches)
5⁄16
3⁄8
7
⁄16
1⁄2
Product Code
2-618
2-620
2-622
2-624
Size (Inches)
9⁄16
5⁄8
11
⁄16
3⁄4
WS-2-13 13 Piece 3/8" Drive Shallow 6 Point Impact Socket Set on Clip Rail - 2.25 lbs
Contents Include:
Product Code
2-608
2-610
2-612
2-614
2-616
Size (Inches)
1
⁄4
5
⁄16
3⁄8
7⁄16
1⁄2
Product Code
2-618
2-620
2-622
2-624
2-626
Size (Inches)
9
⁄16
5
⁄8
11⁄16
3⁄4
13⁄16
Product Code
2-628
2-630
2-632
WS-2-8
Size (Inches)
7
⁄8
15
⁄16
1
WS-2-13
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
3/8" Drive Universal Impact Sockets, 6 Point, SAE
Black Industrial Finish
Product
Code
Size
(Inches)
OAL
(Inches)
B
Drive End
Diameter
(Inches)
36212
36214
36216
36218
36220
36222
36224
⁄8
7
⁄16
1
⁄2
9
⁄16
5
⁄8
11
⁄16
3
⁄4
2 1⁄4
2 1⁄4
2 1⁄3
2 1⁄3
2 1⁄3
2 5⁄8
2 5⁄8
1
1
1
1
1
1
1
3
A
C
Working End
Diameter
(Inches)
D
Broach
Depth
(Inches)
⁄16
11
⁄16
13
⁄16
13
⁄16
14
⁄16
1
1 2⁄16
⁄16
6
⁄16
6
⁄16
6
⁄16
6
⁄16
8
⁄16
8
⁄16
10
6
E
Bolt Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
⁄16
8
⁄16
9
⁄16
9
⁄16
9
⁄16
11
⁄16
11
⁄16
8
⁄16
6
⁄16
7
⁄16
8
⁄16
9
⁄16
10
⁄16
11
⁄16
5
F
Nose
Length
(Inches)
⁄16
15
⁄16
1 1⁄16
1 1⁄16
1 1⁄16
1 4⁄16
1 4⁄16
15
Weight (lbs)
0.23
0.26
0.26
0.26
0.25
0.33
0.34
36224
Fed. Spec: ANSI B107.2
36912 7 Piece 3/8" Drive Universal 6 Point Impact Socket Set on Clip Rail 2.20 lbs
Contents Include:
Product Code
36212
36214
36216
36218
!
20
Size (Inches)
3
⁄8
7
⁄16
1
⁄2
9
⁄16
Product Code
36220
36222
36224
Size (Inches)
5
⁄8
11
⁄16
3
⁄4
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
36912
Sockets &
Drive Tools
tools at height
3/8" Drive Shallow Impact Sockets, 12 Point, SAE
Black Industrial Finish
Product
Code
35310
35312
35314
35316
35318
35320
35322
35324
35326
35328
35330
35332
36902
36921
Features
• SUPERTORQUE® lobular openings for greater turning power without
deforming the fastener.
• Designed for maximum engagement on 6 or 12 point fasteners.
• Suitable for use with pneumatic and electric impact wrenches.
• Specially heat treated for impact use to provide long life, safety, and
durability.
• Drive end features pin retention hole and groove.
Size
(Inches)
5
⁄16
3
⁄8
7
⁄16
1
⁄2
9
⁄16
5
⁄8
11
⁄16
3
⁄4
13
⁄16
7
⁄8
15
⁄16
1
A
OAL
(Inches)
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄8
B
Drive End
Diameter
(Inches)
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
1
1
1
1 1⁄8
1 1⁄8
1 1⁄4
1 3⁄8
C
Working End
Diameter
(Inches)
1
⁄2
1
⁄2
5
⁄8
3
⁄4
3
⁄4
15
⁄16
15
⁄16
1
1
1 1⁄8
1 1⁄4
1 3⁄8
D
Broach
Depth
(Inches)
3
⁄8
3
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
E
F
Bolt Clearance Bolt Clearance Nose
Depth
Diameter
Length Weight
(Inches)
(Inches)
(Inches) (lbs)
1
1
/
⁄4
⁄2
0.80
1
3
/
⁄8
⁄2
0.80
1
3
/
⁄8
⁄2
0.80
3
/
⁄8
/
0.80
1
/
⁄2
/
0.81
1
/
⁄2
/
0.82
1
/
⁄2
/
0.83
5
/
⁄8
/
0.85
3
/
⁄4
/
0.88
3
/
⁄4
/
0.90
3
/
⁄4
/
0.92
/
1
/
0.93
36921 12 piece 3/8" Drive Shallow 12 Point Impact Socket Set on Clip Rail 2.20 lbs
Contents Include:
Product Code
35310
35312
35314
35316
Size (Inches)
5
⁄16
3
⁄8
7
⁄16
1
⁄2
Product Code
35318
35320
35322
35324
Size (Inches)
9
⁄16
5
⁄8
11
⁄16
3
⁄4
Product Code
35326
35328
35330
35332
Size (Inches)
13
⁄16
7
⁄8
15
⁄16
1
3/8" Drive Deep Impact Sockets, 6 Point, SAE
Black Industrial Finish
Product
Code
12-616
12-610
12-612
12-614
12-616
12-618
12-620
12-622
12-624
12-626
12-628
12-630
12-632
12-610
A
B
C
D
E
2 1⁄8
2 1⁄8
2 1⁄8
2 1⁄8
2 3⁄8
2 3⁄8
2 5⁄8
2 5⁄8
2 3⁄4
2 3⁄4
2 3⁄4
2 3⁄4
⁄
⁄
11⁄16
3⁄4
13⁄16
29
⁄32
31
⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 9⁄32
1 11⁄32
⁄
⁄
21⁄32
3⁄4
13⁄16
29
⁄32
31
⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 9⁄32
1 11⁄32
⁄
⁄
⁄
3⁄ 8
7⁄16
15
⁄32
1
⁄2
9
⁄16
9⁄16
19⁄32
19
⁄32
5⁄8
1 21⁄32
1 5⁄8
1 5⁄8
1 15⁄32
1 1⁄2
11⁄2
1 19⁄32
1 19⁄32
1 25⁄32
1 7⁄8
1 15⁄16
2
F
Size
OAL
Drive End
Working End
Broach Depth Bolt Clearance Bolt Clearance Nose Length Weight
(Inches) (Inches) Diameter (Inches) Diameter (Inches)
(Inches)
Depth (Inches) Diameter (Inches)
(Inches) (lbs)
⁄
⁄
⁄
⁄
9
⁄16
5⁄8
11
⁄16
3⁄4
13
⁄16
7⁄8
15⁄16
1
5 16
3
8
7
16
12
11 16
11 16
12
58
14
9 32
11 32
⁄
⁄
⁄
7⁄16
17⁄32
5
⁄8
21
⁄32
23⁄32
25⁄32
27⁄32
29
⁄32
1
9 32
11 32
11 32
1 5⁄8
1 5⁄8
1 5⁄8
-
0.10
0.11
0.13
0.17
0.20
0.24
0.30
0.37
0.37
0.47
0.55
0.45
Fed. Spec: ANSI B107.2
WS-12-8 8 Piece 3/8" Drive Deep 6 Point Impact Socket Set on Clip Rail 1.85 lbs
Contents Include:
WS-12-8
Product Code
12-610
12-612
Size (Inches) Product Code
⁄16
3
⁄8
5
12-614
12-616
Size (Inches) Product Code
⁄16
1
⁄2
7
12-618
12-620
Size (Inches) Product Code
⁄16
⁄8
9
5
12-622
12-624
Size (Inches)
⁄16
⁄4
11
3
WS-12-12 12 Piece 3/8" Drive Deep 6 Point Impact Socket Set on Clip Rail 4.14 lbs.
Contents Include:
Product Code
WS-12-12
12-610
12-612
12-614
Size (Inches) Product Code
⁄16
3
⁄8
7
⁄16
5
12-616
12-618
12-620
Size (Inches) Product Code
⁄2
9
⁄16
5
⁄8
1
12-622
12-624
12-626
Size (Inches) Product Code
⁄16
3
⁄4
13
⁄16
11
12-628
12-630
12-632
Size (Inches)
⁄8
⁄16
1
7
15
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
21
Sockets &
Drive Tools
tools at height
M
3/8" Drive deep Impact Sockets, 12 Point, SAE
Black Industrial Finish
Product
Code
36410
36412
36414
36416
36418
36420
36422
36424
36426
36428
36430
36432
Size
(Inches)
5
⁄16
3
⁄8
7
⁄16
1
⁄2
9
⁄16
5
⁄8
11
⁄16
3
⁄4
13
⁄16
7
⁄8
15
⁄16
1
A
OAL
(Inches)
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
B
Drive End
Diameter
(Inches)
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
1
1
1
1
1
1 ⁄8
1
1 ⁄4
1 3⁄8
C
Working End
Diameter
(Inches)
1
⁄2
1
⁄2
5
⁄8
3
⁄4
3
⁄4
1
1
1
1
1
1 ⁄8
1
1 ⁄4
1 3⁄8
D
Broach
Depth
(Inches)
1
⁄2
3
⁄4
3
⁄4
1
1
1
1
1
1
1
1
1
E
Bolt Clearance
Depth
(Inches)
/
/
/
/
/
/
/
/
/
/
/
/
Bolt Clearance
Diameter
(Inches)
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
5
⁄8
1
36922 12 piece 3/8" Drive Shallow 12 Point Impact Socket Set on Clip Rail 4.40 lbs
Contents Include:
Product Code
36410
36412
36414
36416
Size (Inches)
5
⁄16
3
⁄8
7
⁄16
1
⁄2
Product Code
36418
36420
36422
36424
Size (Inches)
9
⁄16
5
⁄8
11
⁄16
3
⁄4
Product Code
36426
36428
36430
36432
F
Nose
Length
(Inches)
1 1⁄4
1 1⁄4
1 1⁄4
/
/
/
/
/
/
/
/
/
Weight (lbs.)
0.15
0.15
0.18
0.18
0.19
0.20
0.21
0.25
0.30
0.32
0.34
0.36
36410
Size (Inches)
13
⁄16
7
⁄8
15
⁄16
1
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 or 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
36922
M
3/8" Drive Shallow Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
Product
Code
2M-607
2M-608
2M-609
2M-610
2M-611
2M-612
2M-613
2M-614
2M-615
2M-616
2M-617
2M-618
2M-619
Size
(MM)
7
8
9
10
11
12
13
14
15
16
17
18
19
OAL
(Inches)
1 1⁄32
1 1⁄32
1 1⁄32
1 1⁄32
1 1⁄32
1 1⁄16
1 1⁄16
1 3⁄32
1 3⁄32
1 1⁄8
1 5⁄32
1 5⁄32
1 3⁄16
B
Drive End
Diameter
(Inches)
11
⁄16
11
⁄16
11
⁄16
11
⁄16
11
⁄16
23
⁄32
25
⁄32
13
⁄16
27
⁄32
29
⁄32
31
⁄32
1
1
1 ⁄16
C
Working End
Diameter
(Inches)
7
⁄16
1
⁄2
9
⁄16
5
⁄8
21
⁄32
23
⁄32
25
⁄32
13
⁄16
27
⁄32
29
⁄32
31
⁄32
1
1
1 ⁄16
D
Broach
Depth
(Inches)
7
⁄32
1
⁄4
9
⁄32
9
⁄32
9
⁄32
9
⁄32
9
⁄32
9
⁄16
9
⁄16
19
⁄32
19
⁄32
5
⁄8
21
⁄32
E
Bolt Clearance
Depth
(Inches)
9
⁄16
9
⁄16
9
⁄16
9
⁄16
19
⁄32
9
⁄16
19
⁄32
19
⁄32
19
⁄32
5
⁄8
5
⁄8
21
⁄32
11
⁄16
Bolt Clearance
Diameter
(Inches)
1
⁄4
9
⁄32
11
⁄32
11
⁄32
11
⁄32
11
⁄32
3
⁄8
1
⁄2
9
⁄16
19
⁄32
5
⁄8
11
⁄16
23
⁄32
MS-2-13H 1 3 Piece 3/8" Drive Shallow 6 Point Impact Socket Set on Clip Rail 1.68 lbs
Contents Include:
Product Code
2M-607
2M-608
2M-609
2M-610
2M-611
Size (MM)
7
8
9
10
11
Features
•
•
•
•
22
Product Code
2M-612
2M-613
2M-614
2M-615
2M-616
Size (MM)
12
13
14
15
16
Product Code
2M-617
2M-618
2M-619
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
F
Nose
Length
(Inches)
17
⁄32
17
⁄32
17
⁄32
17
⁄32
9
⁄16
-
Size (MM)
17
18
19
Weight (lbs)
0.05
0.05
0.06
0.06
0.07
0.08
0.10
0.08
0.09
0.13
0.14
0.14
0.17
2M-614
2M-607
MS-2-13H
Sockets &
Drive Tools
tools at height
M
3/8" Drive Universal Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
Product
Code
36810
36811
36812
36813
36814
36815
36816
36817
36818
36819
36819
Size
(MM)
10
11
12
13
14
15
16
17
18
19
OAL
(Inches)
2 1⁄4
2 1⁄4
2 1⁄4
3
⁄8
3
⁄8
3
⁄8
3
⁄8
3
⁄8
2 5⁄8
2 5⁄8
B
Drive End
Diameter
(Inches)
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
7
⁄8
C
Working End
Diameter
(Inches)
5
⁄8
11
⁄16
11
⁄16
13
⁄16
13
⁄16
7
⁄8
7
⁄8
1
1 1⁄16
1
⁄8
D
Broach
Depth
(Inches)
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
E
Bolt Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
1
5
⁄2
⁄16
1
3
⁄2
⁄8
1
3
⁄2
⁄8
9
3
⁄16
⁄8
9
1
⁄16
⁄2
9
9
⁄16
⁄16
9
9
⁄16
⁄16
11
5
⁄16
⁄8
11
11
⁄16
⁄16
11
11
⁄16
⁄16
36910 10 Piece 3/8" Drive Universal 6 Point Impact Socket Set on Clip Rail 3.07 lbs
Contents Include:
Product Code
36810
36811
36812
36813
36910
Size (MM)
10
11
12
13
Product Code
36814
36815
36816
36817
Size (MM)
14
15
16
17
Product Code
36818
36819
F
Nose
Length
(Inches) Weight (lbs)
15
⁄16 0.23
15
⁄16 0.24
15
⁄16 0.24
1 1⁄16 0.26
1 1⁄16 0.23
1 1⁄16 0.00
1 1⁄16 0.26
1 1⁄4 0.32
1 1⁄4 0.33
1 1⁄4 0.35
Size (MM)
18
19
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Drive end features pin retention hole and groove
3/8" Drive One Piece Impact Hex Bit Stubby Drivers, SAE
Black Industrial Finish - OAL 1-1/8”
Product Code
35620
35622
35624
35626
35622
35630
Size (inches)
1
⁄8
5
⁄32
3
⁄16
7
⁄32
Weight (lbs)
.05
.05
.06
.06
Product Code
35628
35630
35632
Size (inches)
1
⁄4
5
⁄16
3
⁄8
Weight (lbs)
.07
.07
.08
Fed. Spec: ANSI B107.2
36914 7 Piece 3/8" Drive One Piece Impact Hex Bit Stubby Drivers, SAE .61 lbs
Contents Include:
Product Code
35620
35622
35624
Size (Inches)
1
⁄8
5
⁄32
3
⁄16
Product Code
35626
35628
35630
Size (Inches)
7
⁄32
1
⁄4
5
⁄16
Product Code
35632
Size (Inches)
3
⁄8
M
36914
3/8" Drive One Piece Impact Hex Bit STubby Drivers, MM
Black Industrial Finish OAL -1-1/8”
Product Code
35604
35605
35606
35605
35608
Size (inches)
4
5
6
Weight (lbs)
.04
.04
.05
Product Code
35608
35610
Size (inches)
8
10
Weight (lbs)
.07
.09
Fed. Spec: ANSI B107.2
36918 5 Piece 3/8" Drive One Piece Impact Hex Bit Stubby Drivers, MM 2.20 lbs
Contents Include:
Product Code
35604
35605
Size (MM)
4
5
Product Code
35606
35608
Size (MM)
6
8
Product Code
35610
Size (MM)
10
36918
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
23
Sockets &
Drive Tools
tools at height
M
3/8" Drive shallow Impact Sockets, 12 Point, MM
Black Industrial Finish
A
Overall
Product
Length
Code
Size (MM) (Inches)
36607
7
1 1⁄8
36608
8
1 1⁄8
36609
9
1 1⁄8
36610
10
1 1⁄8
36611
11
1 1⁄8
36612
12
1 1⁄8
36613
13
1 1⁄8
36614
14
1 1⁄8
36615
15
1 1⁄8
36616
16
1 1⁄8
36617
17
1 1⁄8
36618
18
1 1⁄8
36619
19
1 1⁄8
B
Drive End
Diameter
(Inches)
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
7
⁄8
7
⁄8
7
⁄8
1
1
C
Working
End Diamter
(Inches)
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
7
⁄8
1
1
1
1
D
E
F
Broach Depth
(Inches)
3
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
Bolt Clearance
Depth (Inches)
/
/
/
/
/
/
/
/
/
/
/
/
/
Bolt Clearance
Diameter (Inches)
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
5
⁄8
5
⁄8
5
⁄8
36923 13 Piece 3/8" Drive Shallow 12 point Impact Socket Set on Clip and Rail 2.20 lbs
Contents Include:
Product Code
36607
36608
36609
36610
36611
Size (MM)
7
8
9
10
11
Product Code
36612
36613
36614
36615
36616
Size (MM)
12
13
14
15
16
Product Code
36617
36618
36619
Nose Length
(Inches)
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
/
/
/
/
/
/
/
/
Weight (lbs)
0.07
0.07
0.07
0.08
0.08
0.08
0.09
0.09
0.10
0.10
0.11
0.12
0.14
36923
Size (MM)
17
18
19
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 or 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
M
3/8" Drive Deep Impact Sockets, 12 Point, MM
Black Industrial Finish
Product
Code
35407
35408
35409
35410
35411
35412
35413
35414
35415
35416
35417
35418
35419
Size
(mm)
7
8
9
10
11
12
13
14
15
16
17
18
19
A
Overall
Length
(Inches)
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
2 1⁄2
B
Drive End
Diameter
(Inches)
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
7
⁄8
7
⁄8
7
⁄8
7
⁄8
1
C
Working
End Diamter
(Inches)
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
7
⁄8
7
⁄8
7
⁄8
7
⁄8
1
D
Broach
Depth
(Inches)
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
7
⁄8
7
⁄8
1
1
1
1
1
E
Bolt Clearance
Bolt Clearance
Diameter
Depth (Inches)
(Inches)
1
/
⁄4
1
/
⁄4
1
/
⁄4
3
/
⁄8
3
/
⁄8
3
/
⁄8
1
/
⁄2
1
/
⁄2
1
/
⁄2
1
/
⁄2
1
/
⁄2
5
/
⁄8
5
/
⁄8
F
Nose
Length
(Inches)
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄4
/
/
/
/
/
/
/
/
Weight
(lbs)
0.15
0.15
0.16
0.16
0.17
0.17
0.18
0.18
0.19
0.20
0.21
0.22
0.22
36924 13 Piece 3/8" Drive Deep 12 point Impact Socket Set on Clip and Rail 3.18 lbs.
Contents Include:
Product Code
35407
35408
35409
35410
Size (MM)
7
8
9
10
Product Code
35411
35412
35413
35414
Size (MM)
11
12
13
14
Product Code
35415
35416
35417
35418
35419
Size (MM)
15
16
17
18
19
Features
•
•
•
•
•
24
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 or 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Sockets &
Drive Tools
tools at height
M
3/8" Drive Deep Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
12M-614
12M-607
Product Size
OAL
Code
(MM) (Inches)
12M-607 7
2 1⁄8
12M-608 8
2 1⁄8
12M-609 9
2 1⁄8
12M-610 10
2 1⁄8
12M-611 11
2 1⁄8
12M-612 12
2 1⁄8
12M-613 13
2 1⁄8
12M-614 14
2 3⁄8
12M-615 15
2 3⁄8
12M-616 16
2 3⁄8
12M-617 17
2 5⁄8
12M-618 18
2 5⁄8
12M-619 19
2 5⁄8
12M-620 20
2 5⁄8
12M-621 21
2 5⁄8
12M-622 22
2 7⁄8
12M-623 23
2 7⁄8
12M-624 24
2 7⁄8
B
Drive End
Diameter
(Inches)
11⁄16
11⁄16
11⁄16
11⁄16
11⁄16
23⁄32
25⁄32
13⁄16
27⁄32
29⁄32
31⁄32
1
1 1⁄16
1 1⁄8
1 5⁄32
1 3⁄16
1 1⁄4
1 5⁄16
C
Working End
Diameter
(Inches)
7⁄16
1⁄2
9⁄16
5⁄8
21⁄32
23⁄32
25⁄32
13⁄16
27⁄32
29⁄32
31⁄32
1
1 1⁄16
1 1⁄8
1 5⁄32
1 3⁄16
1 1⁄4
1 5⁄16
D
Broach
Depth
(Inches)
9⁄32
1⁄ 4
9⁄32
9⁄32
21⁄64
3⁄ 8
7⁄16
13⁄32
13⁄32
13⁄32
7⁄16
7⁄16
9⁄16
15⁄32
1⁄ 2
1⁄ 2
17⁄32
19⁄32
E
Bolt Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
1⁄4
1 11⁄16
9⁄32
1 11⁄16
11⁄32
1 11⁄16
11⁄32
1 11⁄16
11⁄32
1 11⁄16
7⁄16
1 23⁄32
15⁄32
1 3⁄8
1⁄ 2
1 9⁄16
9⁄16
1 9⁄16
19⁄32
1 9⁄16
5⁄8
1 3⁄4
11⁄16
1 3⁄4
23⁄32
1 3⁄4
3⁄4
1 3⁄4
25⁄32
1 3⁄4
27⁄32
1 31⁄32
7⁄8
1 31⁄32
29⁄32
1 31⁄32
MS-12-13H 1 3 Piece 3/8" Drive Deep 6 Point Impact Socket Set 2.80 lbs
on Clip Rail
Contents Include:
MS-12-13H
MS-12-18H
Product Code
12M-607
12M-608
12M-609
12M-610
12M-611
Size (MM)
7
8
9
10
11
Product Code
12M-612
12M-613
12M-614
12M-615
12M-616
Size (MM)
12
13
14
15
16
Product Code
12M-617
12M-618
12M-619
MS-12-18H 1 8 Piece 3/8" Drive Deep 6 Point Impact Socket Set 5.67 lbs
on Clip Rail
Contents Include:
Product Code
12M-607
12M-608
12M-609
12M-610
12M-611
12M-612
Size (MM)
7
8
9
10
11
12
Product Code
12M-613
12M-614
12M-615
12M-616
12M-617
12M-618
Size (MM)
13
14
15
16
17
18
Product Code
12M-619
12M-620
12M-621
12M-622
12M-623
12M-624
F
Nose
Length
(Inches)
1 5⁄8
1 5⁄8
1 5⁄8
1 5⁄8
1 5⁄8
-
Weigth (lbs)
0.08
0.10
0.12
0.12
0.13
0.14
0.18
0.20
0.21
0.25
0.31
0.33
0.37
0.40
0.37
0.50
0.61
0.41
Size (MM)
17
18
19
Size (MM)
19
20
21
22
23
24
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
1/2" Drive Scaffolding Ratchet
BS-62
Product Code
BS-62
BS-63B
BS-63BRK
Features
Description
Scaffolding Ratchet with out pry bar
Scaffolding Ratchet with pry bar
Repair Kit
Product Code
BS-63BTIP
BS-63BBAR
Description
Hammer Tip
Pry Bar
•
•
•
•
•
BS-63B
1/2" Drive with pinned 7/8" 6-point socket
36 tooth gear with 10 degree of engagement allows engagement in tight working areas
Bronze hammer head reduces rebound
Pry bar handle provide alignment option
Socket feature SUPERTORQUE lobular opening for greater turning power without
deforming the fastener
• Easy access reversing lever allows user to change working direction quickly and easily
with only one hand
• Tethering device attached to handle
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
25
Sockets &
Drive Tools
tools at height
1/2" Drive Handles
Knurled Handle, Chrome and Black Industrial Finish
Product Code
S-40AA-TH
S-41AA-TH
BS-41AA-TH
S121P-TH
Description
Chrome Flex Handle
Chrome Flex Handle
Black Industrial Finish Flex Handle
Extension
Length (Inches)
10 13⁄16
15 1⁄2
15 1⁄2
20
BS-41AA-TH
Weight (lbs)
1.34
2.07
2.06
1.76
Fed. Spec: ANSI B107.10M
Features
• Chrome plating provides increased protection from rust and corrosion.
• Drive handles provide extra leverage with greater strength than ratchets.
• Speeder handle is ideal for fast turn down of fasteners.
S-40AA-TH
1/2" Drive Enclosed Head Ratchets
Williams® Sealed Narrow Head Design,
Chrome and Black Industrial Finish
Product Code
S-52EHA-TH
S-52EHLA-TH
SB-52EHLA-TH
Description
Chrome Finish Enclosed Head Ratchet
Chrome Finish Enclosed Head Ratchet, Long
Black Industrial Finish Enclosed Head Ratchet, Long
Length
(Inches)
10 1⁄4
15
15
Number
of Teeth
36
36
36
Weight (lbs)
1.61
1.94
1.64
Fed. Spec: ANSI B107.10M
Features
• Enclosed head is sealed to prevent dust, dirt, and liquids from
entering head, preserving internal lubrication.
• Forged one-piece ratchet provide strength and safety for industrial applications.
• Smooth comfort-grip handle permits all-day use without gloves.
• 36 tooth gear with 10 degree of engagement allows engagement in tight working areas.
• Nickel/Chrome plating provides increase protection from rust and corrosion.
• Chrome finish models feature mirror-like exterior that can be easily cleaned after each use.
S-52EHA-TH
1/2" Drive Standard Length Hex Bit Sockets, SAE
High-Polished Chrome Finish
Product Code
35208-TH
35210-TH
35212-TH
35214-TH
35202-TH
35203-TH
35204-TH
35206-TH
Size
(Inches)
1⁄4
5
⁄16
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
3⁄4
Socket Length
(Inches)
1 7⁄16
1 7⁄16
1 7⁄16
1 7⁄16
1 19⁄32
1 19⁄32
1 19⁄32
1 19⁄32
Socket Outside Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
7⁄8
1
1 1⁄16
3
1 ⁄16
Overall Length
(Inches)
2 13⁄32
2 13⁄32
2 13⁄32
2 13⁄32
2 13⁄32
2 13⁄32
2 13⁄32
2 13⁄32
Bit Length
(Inches)
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
35212-TH
Weight (lbs)
0.17
0.17
0.19
0.22
0.26
0.33
0.39
0.51
M
1/2" Drive Standard Length Hex Bit Sockets, Metric
High-Polished Chrome Finish
Product Code
35274-TH
35275-TH
35276-TH
35277-TH
35278-TH
35279-TH
Features
Size
(MM)
8
10
12
14
17
19
Socket Length
(Inches)
1 19⁄32
1 19⁄32
1 19⁄32
1 19⁄32
1 19⁄32
1 19⁄32
• High-polished chrome finish socket cleans easily.
26
Socket Outside Diameter
(Inches)
29⁄32
29⁄32
29⁄32
1
1 3⁄32
3
1 ⁄16
Overall Length
(Inches)
2 13⁄32
2 7⁄16
2 7⁄16
2 7⁄16
2 7⁄16
2 7⁄16
Bit Length
(Inches)
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
Weight (lbs)
0.17
0.19
0.22
0.32
0.43
0.51
35274-TH
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Sockets &
Drive Tools
tools at height
M
1/2" Drive Shallow Sockets, 12 Point, Metric
High-Polished Chrome Finish
A
STM-1220-TH
Product
Size
Code
(MM)
STM-1210-TH 10
STM-1211-TH 11
STM-1212-TH 12
STM-1213-TH 13
STM-1214-TH 14
STM-1215-TH 15
STM-1216-TH 16
STM-1217-TH 17
STM-1218-TH 18
STM-1219-TH 19
STM-1220-TH 20
STM-1221-TH 21
STM-1222-TH 22
STM-1223-TH 23
STM-1224-TH 24
STM-1225-TH 25
STM-1226-TH 26
STM-1227-TH 27
STM-1228-TH 28
STM-1229-TH 29
STM-1230-TH 30
STM-1232-TH 32
STM-1234-TH 34
STM-1236-TH 36
OAL
(Inches)
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
11⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 17⁄32
1 9⁄16
1 5⁄8
1 23⁄32
1 3⁄4
1 3⁄4
1 3⁄4
1 7⁄8
2 1⁄16
2 1⁄16
B
Drive End
Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
31⁄32
1
1 1⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 9⁄32
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
1 9⁄16
1 5⁄8
1 11⁄16
1 3⁄4
1 15⁄16
C
D
Working End Broach
Diameter
Depth
(Inches)
(Inches)
19⁄32
5⁄16
11⁄16
5⁄16
23⁄32
13⁄32
25⁄32
3⁄8
27⁄32
3⁄8
7⁄8
3⁄8
29⁄32
9⁄16
31⁄32
9⁄16
13⁄16
1
13⁄16
1 1⁄32
13⁄16
1 1⁄16
13⁄16
1 1⁄8
13⁄16
1 3⁄16
25⁄32
1 1⁄4
13⁄16
1 9⁄32
13⁄16
1 5⁄16
29⁄32
1 3⁄8
31⁄32
1 7⁄16
1 1⁄2
1
1 9⁄16
1 1⁄32
5
1
1 ⁄8
1 ⁄32
1 11⁄16
1 1⁄8
3
7⁄ 8
1 ⁄4
7⁄ 8
1 15⁄16
E
Bolt Clearance
Depth
(Inches)
7⁄ 8
7⁄ 8
7⁄8
7⁄8
7⁄8
7⁄8
7⁄ 8
7⁄ 8
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
13⁄16
27⁄32
7⁄8
15⁄16
1
1 1⁄16
1
1 ⁄16
1 1⁄32
1 5⁄32
1 7⁄16
1 7⁄16
Bolt Clearance
Diameter
(Inches)
11⁄32
13⁄32
7⁄16
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
23⁄32
23⁄32
3⁄4
25⁄32
27⁄32
7⁄8
15⁄16
31⁄32
1
1 1⁄32
1
1 ⁄16
1 3⁄32
1 3⁄16
1
1 13⁄32
F
Nose
Length
(Inches) Weight(lbs)
23⁄32
0.12
23⁄32
0.13
23⁄32
0.13
23⁄32
0.13
23⁄32
0.14
0.15
0.15
0.16
0.16
0.18
0.18
0.21
0.24
0.28
0.29
0.30
0.35
0.39
0.45
0.49
0.60
0.60
0.69
0.69
Fed. Spec: ANSI B107.5
M
1/2" Drive DEEP Sockets, 12 Point, Metric
High-Polished Chrome Finish
A
32820-TH
The lock button engages with
specially engineered side holes
drilled in sockets, extensions and
adaptors ensuring positive retention.
Product
Code
32809-TH
32810-TH
32811-TH
32812-TH
32813-TH
32814-TH
32815-TH
32816-TH
32817-TH
32818-TH
32819-TH
32820-TH
32821-TH
32822-TH
32823-TH
32824-TH
32825-TH
32826-TH
32827-TH
32828-TH
32829-TH
32830-TH
32832-TH
32836-TH
Size
(MM)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
36
OAL
(Inches)
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
B
Drive End
Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
31⁄32
1
1 1⁄32
1
1 ⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 9⁄32
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
1 9⁄16
1 5⁄8
1 11⁄16
1 15⁄16
C
D
Working End Broach
Diameter
Depth
(Inches)
(Inches)
19⁄32
5⁄16
19⁄32
5⁄16
11⁄16
5⁄16
23⁄32
13⁄32
25⁄32
3⁄8
27⁄32
3⁄8
7⁄8
3⁄8
29⁄32
9⁄16
31⁄32
9⁄16
13⁄16
1
13⁄16
1 1⁄32
13⁄16
1 1⁄16
13⁄16
1 1⁄8
13⁄16
1 3⁄16
25⁄32
1 1⁄4
13⁄16
1 9⁄32
13⁄16
1 5⁄16
29⁄32
1 3⁄8
31⁄32
1 7⁄16
1 1⁄2
1
1 9⁄16
1 1⁄32
1 5⁄8
1 1⁄32
1 11⁄16
1 1⁄8
7⁄ 8
1 15⁄16
E
Bolt Clearance
Depth
(Inches)
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
2 11⁄32
2 11⁄32
2 11⁄32
2 11⁄32
2 5⁄16
2 5⁄16
2 5⁄16
2 5⁄16
2 5⁄16
2 5⁄16
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
Bolt Clearance
Diameter
(Inches)
11⁄32
11⁄32
13⁄32
7⁄16
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
23⁄32
23⁄32
3⁄4
25⁄32
27⁄32
7⁄8
15⁄16
31⁄32
1
1 1⁄32
1 1⁄16
1 3⁄32
1 3⁄16
1 13⁄32
F
Nose
Length
(Inches)
2 19⁄32
2 19⁄32
2 19⁄32
2 19⁄32
2 19⁄32
2 19⁄32
-
Weight
(lbs)
0.22
0.22
0.22
0.23
0.24
0.24
0.24
0.27
0.31
0.34
0.37
0.40
0.41
0.46
0.49
0.52
0.55
0.57
0.66
0.73
0.78
0.83
0.93
1.16
Fed. Spec: ANSI B107.5
32949-TH - 24 Piece 1/2" Drive Deep 12 Point Socket Set on Clip Rail 12.02 lbs.
Features
• SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
• Designed for quick engagement on both 6 and 12 point fasteners.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
27
Sockets &
Drive Tools
tools at height
1/2" Drive Shallow Impact Sockets, 6 Point, SAE
Black Industrial Finish
Product
Code
4-612
4-614
4-616
4-618
4-620
4-622
4-624
4-626
4-628
4-630
4-632
4-634
4-636
4-638
4-640
4-642
4-644
4-646
4-648
Size
(Inches)
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1 1/16
1 1/8
1 3/16
1 1/4
1 5/16
1 3/8
1 7/16
1 1/2
A
B
C
D
OAL
(Inches)
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 1/2
1 3/4
1 3/4
2
2
2
2
2
2
2
2
Drive End
Diameter
(Inches)
29/32
29/32
29/32
29/32
31/32
1 1/16
1 1/8
1 1/4
1 5/16
1 3/8
1 7/16
1 9/16
1 5/8
1 11/16
1 3/4
1 1/2
1 1/2
1 1/2
1 9/16
Working End
Diameter
(Inches)
19/32
23/32
13/16
7/8
31/32
1 1/16
1 1/8
1 1/4
1 5/16
1 3/8
1 7/16
1 9/16
1 5/8
1 11/16
1 3/4
1 7/8
1 15/16
2
2 1/8
Broach
Depth
(Inches)
1/4
5/16
13/32
13/32
15/32
13/16
13/16
13/16
13/16
1 1/32
1 1/32
1 1/4
1 1/4
1 1/4
13/16
7/8
7/8
29/32
29/32
E
Bolt
Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
7/8
11/32
7/8
13/32
7/8
15/32
7/8
15/32
7/8
1/2
27/32
5/8
27/32
11/16
13/16
25/32
13/16
7/8
15/16
1 1/16
1 1/16
1
1 9/32
1 1/32
9
1 /32
1 1/8
1 9/32
1 5/32
1 9/32
1 7/32
1 3/8
1 1/16
1 3/8
1 1/16
1 3/8
1 1/16
1 3/8
1 1/16
F
Nose
Length
(Inches)
11/16
11/16
11/16
11/16
-
Weight (lbs)
0.22
0.27
0.33
0.36
0.40
0.49
0.56
0.71
0.83
0.89
0.88
1.04
1.24
1.30
1.30
1.30
1.65
1.65
1.87
4-612, 4-624
Fed. Spec: ANSI B107.2
WS-4-7RC 7 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 1.71 lbs
Contents Include:
Product Code
4-614
4-616
4-618
4-620
Size (Inches)
7⁄16
1⁄2
9 16
58
⁄
⁄
Product Code
4-622
4-624
4-626
Size (Inches)
11⁄16
3⁄4
13⁄16
WS-4-11RC 11 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 4.24 lbs
Contents Include:
Product Code
4-616
4-618
4-620
4-622
Size (Inches)
1⁄2
9⁄16
5⁄8
11⁄16
Product Code
4-624
4-626
4-628
4-630
Size (Inches)
3⁄4
13⁄16
7⁄8
15⁄16
Product Code
4-632
4-634
4-636
WS-4-14 14 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 5.34 lbs
Contents Include:
Product Code
4-612
4-614
4-616
4-618
4-620
Size (Inches)
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
Product Code
4-622
4-624
4-626
4-628
4-630
Size (Inches)
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
Product Code
4-632
4-634
4-636
4-640
WS-4-19RC 19 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 10.25 lbs
Contents Include:
Product Code
4-612
4-614
4-616
4-618
4-620
Size (Inches)
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
Product Code
4-622
4-624
4-626
4-628
4-630
Size (Inches)
11⁄16
3/4
13/16
7/8
15/16
Product Code
4-632
4-634
4-636
4-638
4-640
Size (Inches)
1
11/16
1 1⁄8
1 3/16
1 1/4
Product Code
4-642
4-644
4-646
4-648
WS-4-7RC
Size (Inches)
1
1 1⁄16
1 1⁄8
WS-4-11RC
Size (Inches)
1
1 1⁄16
1 1⁄8
1 1⁄4
WS-4-14
Size (Inches)
1 5/16
1 3/8
1 7/16
1 1/2
WS-4-19RC
Features
•
•
•
•
28
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Sockets &
Drive Tools
tools at height
1/2" Drive Shallow Impact Sockets, 12 Point, SAE
Black Industrial Finish
A
35524
Product Size
OAL
Code
(Inches) (Inches)
3
⁄8
1 1⁄2
35512
7
35514
⁄16
1 1⁄2
1
35516
⁄2
1 1⁄2
9
35518
⁄16
1 1⁄2
5
35520
⁄8
1 1⁄2
11
35522
⁄16
1 1⁄2
3
35524
⁄4
1 1⁄2
13
⁄16
1 1⁄2
35526
7
⁄8
1 1⁄2
35528
15
⁄16
1 1⁄2
35530
35532
1
1 1⁄2
35534
1 1⁄16 1 9⁄16
1 9⁄16
35536
1 1⁄8
35538
1 3⁄16 1 9⁄16
1 9⁄16
35540
1 1⁄4
35542
1 5⁄16
1 5⁄8
1 5⁄8
35544
1 3⁄8
1 5⁄8
35546
1 7⁄16
1 5⁄8
35548
1 1⁄2
35512
37923
B
Drive End
Diameter
(Inches)
7
⁄8
7
⁄8
7
⁄8
1
1
1
1
1
1 ⁄8
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
C
D
F
Working End
Bolt Clearance
Diameter Broach Depth
Diameter Nose Length
(Inches)
(Inches)
(Inches)
(Inches) Weight (lbs)
5
3
1
5
⁄8
⁄8
⁄4
⁄8
0.11
3
3
1
5
⁄4
⁄8
⁄4
⁄8
0.11
3
3
1
5
⁄4
⁄8
⁄4
⁄8
0.13
3
1
5
7
⁄8
⁄8
⁄2
⁄8
0.13
1
1
1
⁄2
⁄2
/
0.15
1
1
1
⁄2
⁄2
/
0.15
5
1
1
⁄2
⁄8
/
0.15
1
3
1
1 ⁄8
⁄2
⁄4
/
0.17
1
3
1 1⁄4
⁄2
⁄4
/
0.17
1
7
1 1⁄4
⁄2
⁄8
/
0.19
1
7
1 1⁄2
⁄2
⁄8
/
0.19
5
1 1⁄2
⁄8
1
/
0.19
3
9
1 1⁄2
⁄4
1
⁄16
0.20
3
9
1 5⁄8
⁄4
1
⁄16
0.20
3
9
3
1
1 ⁄4
⁄4
1 ⁄8
⁄16
0.25
7
9
3
1
1 ⁄4
⁄8
1 ⁄8
⁄16
0.25
7
9
7
1
1 ⁄8
⁄8
1 ⁄4
⁄16
0.26
9
7
2
⁄8
1 1⁄4
⁄16
0.26
9
2
1
1 3⁄8
⁄16
0.27
37923 11 piece 1/2" Drive Impact Shallow 12 Point Socket Set on Clip Rails 2.86 lbs
Contents Include:
Product Code
35512
35514
35516
35518
Size (Inches)
3
⁄8
7
⁄16
1
⁄2
9
⁄16
Product Code
35520
35522
35524
35526
Size (Inches)
5
⁄8
11
⁄16
3
⁄4
13
⁄16
Product Code
35528
35530
35532
Size (Inches)
7
⁄8
15
⁄16
1
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 and 12 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Drive end features pin retention hole and groove
1/2" Drive Universal Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
37224
Product Size
OAL
Code (Inches) (Inches)
1
⁄2
2 3⁄4
37216
9
37218
⁄16
2 3⁄4
5
37220
⁄8
2 3⁄4
11
⁄16
2 3⁄4
37222
3
37224
⁄4
2 3⁄4
13
37226
⁄16
3
7
37228
⁄8
3
B
Drive End
Diameter
(Inches)
1
1
1
1
1 ⁄4
1
1 ⁄4
1 1⁄4
1 1⁄4
Fed. Spec: ANSI B107.2
C
D
E
F
Working End
Bolt Clearance Bolt Clearance
Diameter Broach Depth
Depth
Diameter Nose Length Weight
(Inches)
(Inches)
(Inches)
(Inches)
(Inches)
(lbs)
3
3
9
7
⁄4
⁄8
⁄16
⁄16
1
0.25
7
3
3
9
⁄4
⁄8
⁄16
⁄16
1
0.27
3
3
9
9
⁄4
⁄8
⁄16
⁄16
1
0.27
1
11
11
1
1
⁄2
⁄16
⁄16
1 ⁄4
0.49
11
1
11
11
1
⁄2
⁄16
⁄16
⁄4
0.57
1
5
13
13
1
1 ⁄4
⁄8
⁄16
⁄16
1 ⁄2
0.57
5
13
13
1 1⁄4
⁄8
⁄16
⁄16
1 1⁄2
0.58
37918 7 Piece 1/2" Drive Universal 6 Point Impact Socket Set on Clip Rail 3.30 lbs
Contents Include:
Product Code
37216
37218
37220
Size (Inches)
1
⁄2
9
⁄16
5
⁄8
Product Code
37222
37224
37226
Size (Inches)
11
⁄16
3
⁄4
13
⁄16
Product Code
37228
Size (Inches)
7
⁄8
Features
37918
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Drive end features pin retention hole and groove
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
29
Sockets &
Drive Tools
tools at height
1/2" Drive Deep Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
Product
Code
14-612
14-614
14-616
14-618
14-620
14-622
14-624
14-626
14-628
14-630
14-632
14-634
14-636
14-638
14-640
14-642
14-644
14-646
14-648
Size
(Inches)
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
OAL
(Inches)
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
B
Drive End
Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
31⁄32
1 1⁄16
1 1⁄8
1 1⁄4
1 5⁄16
1 3⁄8
1 7⁄16
1 9⁄16
1 5⁄8
1 11⁄16
1 3⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 9⁄16
C
Working End
Diameter
(Inches)
19⁄32
23⁄32
13⁄16
7⁄ 8
31⁄32
1 1⁄16
1 1⁄8
1 1⁄4
1 5⁄16
1 3⁄8
1 7⁄16
1 9⁄16
1 5⁄8
1 11⁄16
1 3⁄4
1 7⁄8
2
2
21⁄8
D
Broach
Depth
(Inches)
5⁄16
11⁄32
13⁄32
13⁄32
15⁄32
1⁄ 2
9⁄16
5⁄8
9⁄16
3⁄4
3⁄ 4
25⁄32
13⁄16
13⁄16
1
15⁄16
29⁄32
29⁄32
29⁄32
E
Bolt Clearance
Depth
(Inches)
2 5⁄8
2 5⁄8
2 5⁄8
2 5⁄8
2 7⁄16
2
2
2
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 1⁄4
2 21⁄32
2 7⁄8
2 7⁄8
2 7⁄8
2 7⁄8
Bolt Clearance
Diameter
(Inches)
11⁄32
13⁄32
15⁄32
15⁄32
5⁄ 8
5⁄8
11⁄16
25⁄32
7⁄8
15⁄16
1
1 1⁄32
1 1⁄8
1 3⁄16
1 1⁄4
1 1⁄16
1 1⁄16
1 1⁄16
1 1⁄16
F
Nose
Length
(Inches)
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
-
Weight lbs
0.22
0.27
0.33
0.36
0.40
0.49
0.56
0.71
0.83
0.89
0.88
1.04
1.24
1.30
1.30
1.30
1.65
1.65
1.87
14-612, 14-624
Fed. Spec: ANSI B107.2
WS-14-11 11 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 6.50 lbs
Contents Include:
Product Code
14-612
14-614
14-616
14-618
Size (Inches)
3⁄8
7⁄16
1⁄2
9⁄16
Product Code
14-620
14-622
14-624
14-626
Size (Inches)
5⁄8
11⁄16
3⁄4
13⁄16
Product Code
14-628
14-630
14-632
Size (Inches)
7⁄8
15⁄16
1
WS-14-11
WS-14-14RC 14 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 10.21 lbs
Contents Include:
Product Code
14-612
14-614
14-616
14-618
14-620
Size (Inches)
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
Product Code
14-622
14-624
14-626
14-628
14-630
Size (Inches)
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
Product Code
14-632
14-634
14-636
14-640
Size (Inches)
1
1 1⁄16
1 1⁄8
1 1⁄4
WS-14-14RC
WS-14-19RC 19 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 18.16 lbs
Contents Include:
Product Code
14-612
14-614
14-616
14-618
14-620
Size (Inches)
3⁄8
7⁄16
1⁄2
9⁄16
5⁄8
Product Code
14-622
14-624
14-626
14-628
14-630
Size (Inches)
11⁄16
3⁄4
13⁄16
7⁄8
15⁄16
Product Code
14-632
14-634
14-636
14-638
14-640
Size (Inches)
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
Product Code
14-642
14-644
14-646
14-648
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
!
30
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Size (Inches)
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
WS-14-19RC
Sockets &
Drive Tools
tools at height
1/2" Drive Deep Impact Sockets, 12 Point, SAE
Black Industrial Finish
Product
Code
37412
37414
37416
37418
37420
37422
37424
37426
37428
37430
37432
37434
37436
37438
37440
37442
37444
37446
37448
37412
37424
Size
(Inches)
3
⁄8
7
⁄16
1
⁄2
9
⁄16
5
⁄8
11
⁄16
3
⁄4
13
⁄16
7
⁄8
15
⁄16
1
1
1 ⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
1 3⁄8
1 7⁄16
1 1⁄2
A
OAL
(Inches)
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
B
Drive End
Diameter
(Inches)
7
⁄8
7
⁄8
7
⁄8
15
⁄16
1
1
1
1 1⁄8
1
1 ⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
C
Working End
Diameter
(Inches)
7
⁄8
3
⁄4
13
⁄16
7
⁄8
1
1
1
1 1⁄8
1
1 ⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 5⁄8
1 3⁄4
1 13⁄16
1 7⁄8
2
2
D
Broach
Depth
(Inches)
9
⁄16
9
⁄16
9
⁄16
5
⁄8
5
⁄8
3
⁄4
3
⁄4
1
1
1
1
1
1
1
1
3
1 ⁄8
3
1 ⁄8
1 3⁄8
1 3⁄8
E
Bolt Clearance Bolt Clearance
Depth
Diameter
(Inches)
(Inches)
3
/
⁄8
3
/
⁄8
3
/
⁄8
1
/
⁄2
1
/
⁄2
9
/
⁄16
5
/
⁄8
3
/
⁄4
3
/
⁄4
7
/
⁄8
7
/
⁄8
/
1
/
1
/
1
1
/
1 ⁄8
1
/
1 ⁄8
/
1 1⁄4
/
1 1⁄4
/
1 3⁄8
37924 11 Piece 1/2" Drive Impact Deep 12 Point Socket Set on Clip Rail 5.88 lbs
Contents Include:
37924
Product Code
37412
37414
37416
Size (Inches)
3
⁄8
7
⁄16
1
⁄2
Product Code
37418
37420
37422
37424
Size (Inches)
9
⁄16
5
⁄8
11
⁄16
3
⁄4
Product Code
37426
37428
37430
37432
F
Nose
Length
(Inches)
2
2
2
2
/
/
/
/
/
/
/
/
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
Weight (lbs)
0.25
0.27
0.29
0.30
0.37
0.45
0.50
0.59
0.65
0.71
0.82
0.90
0.92
0.97
1.12
1.20
0.92
1.51
1.65
Size (Inches)
13
⁄16
7
⁄8
15
⁄16
1
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 and 12 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Drive end features pin retention hole and groove
M
1/2" Drive Universal Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
37819
Product
Code
37813
37814
37815
37816
37817
37818
37819
37820
37821
37822
37823
OAL
Size (MM) (Inches)
13
2 3⁄4
14
2 3⁄4
15
2 3⁄4
16
2 3⁄4
17
2 3⁄4
18
2 3⁄4
19
2 3⁄4
20
3
21
3
22
3
23
3
B
Drive End
Diameter
(Inches)
1
1
1
1
1
1 ⁄4
1
1 ⁄4
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄4
C
Working End
Diameter
(Inches)
3
⁄4
3
⁄4
1
1
1
1
1
1
1 ⁄4
1
1 ⁄4
1 1⁄4
1 1⁄4
D
Broach
Depth
(Inches)
3
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
1
⁄2
1
⁄2
5
⁄8
5
⁄8
5
⁄8
5
⁄8
E
Bolt Clearance
Depth
(Inches)
1
⁄2
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
Bolt Clearance
Diameter
(Inches)
1
⁄2
1
⁄2
1
⁄2
1
⁄2
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
37916 11 Piece 1/2" Drive Universal 6 Point Impact Socket Set on Clip Rail 5.30 lbs
Contents Include:
37916
Product Code
37813
37814
37815
37816
Size (MM)
13
14
15
16
Product Code
37817
37818
37819
37820
Size (MM)
17
18
19
20
Product Code
37821
37822
37823
F
Nose
Length
(Inches)
1
1
1
1
1
1 ⁄4
1
1 ⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
Weight (lbs)
0.28
0.28
0.28
0.29
0.49
0.51
0.51
0.57
0.57
0.59
0.59
Size (MM)
21
22
23
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Drive end features pin retention hole and groove
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
31
Sockets &
Drive Tools
tools at height
M
1/2" Drive Shallow Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
Product
Code
4M-610
4M-611
4M-612
4M-613
4M-614
4M-615
4M-616
4M-617
4M-618
4M-619
4M-620
4M-621
4M-622
4M-623
4M-624
4M-625
4M-626
4M-627
4M-629
4M-630
4M-632
4M-634
4M-636
Size
(MM)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
32
34
36
OAL
(Inches)
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 3⁄4
1 3⁄4
1 3⁄4
1 31⁄32
1 31⁄32
1 31⁄32
1 31⁄32
2
2 1⁄16
2 1⁄4
B
Drive End
Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
15⁄16
31⁄32
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
1 5⁄32
1 3⁄8
1 7⁄16
1 1⁄2
1 9⁄16
1 21⁄32
1 11⁄16
1 13⁄16
1 11⁄16
1 13⁄16
C
Working End
Diameter
(Inches)
19⁄32
23⁄32
25⁄32
27⁄32
7⁄ 8
15⁄16
31⁄32
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
1 5⁄32
1 3⁄8
1 7⁄16
1 1⁄2
1 9⁄16
1 21⁄32
1 11⁄16
1 13⁄16
1 7⁄8
2
D
Broach
Depth
(Inches)
1⁄4
5⁄16
3⁄8
13⁄32
7⁄16
7⁄16
15⁄32
1⁄2
27⁄32
13⁄16
13⁄16
13⁄16
13⁄16
1 1⁄32
1 1⁄16
1 1⁄16
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄4
7⁄8
29⁄32
29⁄32
E
Bolt Clearance
Depth
(Inches)
7⁄ 8
7⁄8
7⁄ 8
7⁄ 8
7⁄8
7⁄8
7⁄ 8
7⁄ 8
27⁄32
27⁄32
27⁄32
27⁄32
27⁄32
1 3⁄32
1 3⁄32
1 3⁄32
1 9⁄32
1 9⁄32
1 9⁄32
1 9⁄32
1 9⁄32
1 7⁄16
1 5⁄8
Bolt Clearance
Diameter
(Inches)
11⁄32
13⁄32
7⁄16
15⁄32
15⁄32
15⁄32
15⁄32
15⁄32
21⁄32
11⁄16
23⁄32
3⁄ 4
13⁄16
27⁄32
7⁄8
29⁄32
31⁄32
1
1 1⁄16
1 3⁄32
1 1⁄8
1 11⁄32
1 7⁄16
MS-4-10HRC 1 0 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 2.13 lbs
Contents Include:
Product Code
4M-610
4M-611
4M-612
4M-613
Size (MM)
10
11
12
13
Product Code
4M-614
4M-615
4M-616
4M-617
Size (MM)
14
15
16
17
Product Code
4M-618
4M-619
Size (MM)
13
14
15
16
Product Code
4M-617
4M-618
4M-619
4M-621
Size (MM)
17
18
19
21
Product Code
4M-622
4M-624
4M-627
4M-630
MS-4-16RC 1 6 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 4.75 lbs
Contents Include:
Product Code
4M-610
4M-611
4M-612
4M-613
Size (MM)
10
11
12
13
Product Code
4M-614
4M-615
4M-616
4M-617
Size (MM)
14
15
16
17
Product Code
4M-618
4M-619
4M-620
4M-621
Size (MM)
18
19
20
21
Product Code
4M-622
4M-623
4M-624
4M-627
MS-4-23RC 2 3 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 4.75 lbs
Contents Include:
Product Code
4M-610
4M-611
4M-612
4M-613
4M-614
4M-615
Features
•
•
•
•
32
Size (MM)
10
11
12
13
14
15
Product Code
4M-616
4M-617
4M-618
4M-619
4M-620
4M-621
Size (MM)
16
17
18
19
20
21
Product Code
4M-622
4M-623
4M-624
4M-625
4M-626
4M-627
Weight (lbs)
0.13
0.14
0.11
0.15
0.15
0.18
0.21
0.20
0.22
0.25
0.28
0.34
0.35
0.40
0.43
0.48
0.54
0.58
0.70
0.73
0.87
0.86
1.10
4M-621
4M-610
Size (MM)
18
19
MS-4-10HRC
MS-4-12HRC 1 2 Piece 1/2" Drive Shallow 6 Point Impact Socket Set on Clip Rail 4.25 lbs
Contents Include:
Product Code
4M-613
4M-614
4M-615
4M-616
F
Nose
Length
(Inches)
23⁄32
23⁄32
23⁄32
23⁄32
23⁄32
-
Size (MM)
22
23
24
25
26
27
Product Code
4M-629
4M-630
4M-632
4M-634
4M-636
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Size (MM)
22
24
27
30
Size (MM)
22
23
24
27
MS-4-12HRC
MS-4-16RC
Size (MM)
29
30
32
34
36
MS-4-23RC
Sockets &
Drive Tools
tools at height
M
1/2" Drive Shallow Impact Sockets, 12 Point,MM
Black Industrial Finish
A
37624
37610
Product
Code
37610
37611
37612
37613
37614
37615
37616
37617
37618
37619
37620
37621
37622
37623
37624
37625
37626
37627
37628
37629
37630
37632
37633
37634
37635
37636
Size
(MM)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
OAL
(Inches)
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 5⁄8
1 5⁄8
1 5⁄8
1 5⁄8
1 13⁄16
1 13⁄16
1 13⁄16
1 13⁄16
1 13⁄16
1 13⁄16
1 13⁄16
2
2
B
Drive End
Diameter
(Inches)
7
⁄8
7
⁄8
7
⁄8
15
⁄16
15
⁄16
1
1
1
1
1
1 ⁄8
1
1 ⁄8
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
C
Working End
Diameter
(Inches)
5
⁄8
3
⁄4
3
⁄4
13
⁄16
7
⁄8
7
⁄8
1
1
1
1
1 ⁄8
1
1 ⁄8
1 1⁄4
1 1⁄4
1 1⁄4
1 3⁄8
1 3⁄8
1 1⁄2
1 1⁄2
1 1⁄2
1 5⁄8
1 5⁄8
1 3⁄4
1 13⁄16
1 13⁄16
2
2
D
Broach
Depth
(Inches)
3
⁄8
3
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
9
⁄16
9
⁄16
5
⁄8
5
⁄8
5
⁄8
5
⁄8
3
⁄4
3
⁄4
3
⁄4
3
⁄4
13
⁄16
7
⁄8
7
⁄8
7
⁄8
7
⁄8
E
Bolt Clearance
Depth
(Inches)
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
Bolt Clearance
Diameter
(Inches)
3
⁄8
3
⁄8
3
⁄8
3
⁄8
1
⁄2
1
⁄2
1
⁄2
9
⁄16
5
⁄8
5
⁄8
3
⁄4
3
⁄4
13
⁄16
13
⁄16
7
⁄8
7
⁄8
15
⁄16
15
⁄16
1
1
1
1
1 ⁄8
1
1 ⁄8
1 1⁄4
1 1⁄4
1 1⁄4
F
Nose
Length
(Inches)
5
⁄8
5
⁄8
5
⁄8
5
⁄8
5
⁄8
5
⁄8
/
/
/
/
/
/
/
/
/
/
/
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
9
⁄16
Wegith (lbs)
0.12
0.12
0.13
0.14
0.15
0.16
0.20
0.22
0.28
0.29
0.30
0.33
0.31
0.41
0.46
0.44
0.51
0.59
0.57
0.60
0.60
0.62
0.62
0.75
0.84
0.83
37925 10 piece 1/2" Drive Impact Shallow 12 Point, MM Socket Set on Clip Rails 2.16 lbs
Contents Include:
Product Code
37610
37611
37612
Size (MM)
10
11
12
Product Code
37613
37614
37615
Size (MM)
13
14
15
Product Code
37616
37617
37618
37619
Size (MM)
16
17
18
19
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 and 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
37925
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
33
Sockets &
Drive Tools
tools at height
M
1/2" Drive Deep Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
Product
Code
14M-610
14M-611
14M-612
14M-613
14M-614
14M-615
14M-616
14M-617
14M-618
14M-619
14M-620
14M-621
14M-622
14M-623
14M-624
14M-625
14M-626
14M-627
14M-629
14M-630
14M-632
14M-634
14M-635
14M-636
Size
(MM)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
32
34
35
36
OAL
(Inches)
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄4
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
B
Drive End
Diameter
(Inches)
29⁄32
29⁄32
29⁄32
29⁄32
29⁄32
15⁄16
31⁄32
1
1 1⁄16
1 1⁄4
1 3⁄16
1 1⁄4
1 5⁄16
1 11⁄32
1 3⁄8
1 7⁄16
1 31⁄64
1 9⁄16
1 5⁄8
1 11⁄16
1 13⁄16
1 3⁄4
1 3⁄4
1 3⁄4
C
Working End
Diameter
(Inches)
19⁄32
23⁄32
49⁄64
53⁄64
7⁄ 8
15⁄16
31⁄32
1
1 1⁄16
1 1⁄4
1 3⁄16
1 1⁄4
1 5⁄16
1 11⁄32
1 3⁄8
1 7⁄16
1 31⁄64
1 9⁄16
1 5⁄8
1 11⁄16
1 13⁄16
1 15⁄16
2
2
D
Broach
Depth
(Inches)
9⁄32
21⁄64
23⁄64
25⁄64
13⁄32
13⁄32
29⁄64
27⁄64
1⁄2
35⁄64
35⁄64
35⁄64
35⁄64
5⁄8
5⁄8
5⁄8
5⁄8
25⁄32
13⁄16
53⁄64
7⁄8
57⁄64
57⁄64
57⁄64
E
Bolt Clearance
Depth
(Inches)
2 9⁄16
2 9⁄16
2 9⁄16
2 9⁄16
2 9⁄16
2 7⁄64
1 31⁄32
1 31⁄32
1 31⁄32
1 61⁄64
1 61⁄64
1 61⁄64
2 7⁄64
2 7⁄64
2 7⁄64
2 7⁄64
2 7⁄64
2 7⁄64
2 7⁄64
2 21⁄32
2 21⁄32
2 55⁄64
2 55⁄64
2 13⁄16
Bolt Clearance
Diameter
(Inches)
11⁄32
13⁄32
7⁄16
15⁄32
15⁄32
33⁄64
17⁄32
39⁄64
21⁄32
11⁄16
23⁄32
3⁄4
51⁄64
53⁄64
7⁄8
29⁄32
15⁄16
31⁄32
1 1⁄16
1 3⁄32
1 1⁄4
1 21⁄64
1 23⁄64
1 1⁄8
F
Nose
Length
(Inches)
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
2 15⁄32
-
Weight
0.21
0.27
0.27
0.32
0.36
0.42
0.25
0.41
0.49
0.55
0.62
0.72
0.83
0.83
0.89
0.97
1.05
1.14
1.25
1.30
1.47
1.37
0.79
1.60
14M-610, 14M-621
MS-14-10HRC 1 0 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 4.11 lbs
Contents Include:
Product Code
14M-610
14M-611
14M-612
14M-613
Size (MM)
10
11
12
13
Product Code
14M-614
14M-615
14M-616
14M-617
Size (MM)
14
15
16
17
Product Code
14M-618
14M-619
Size (MM)
18
19
MS-14-10HRC
MS-14-16RC 1 6 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 9.37 lbs
Contents Include:
Product Code
14M-610
14M-611
14M-612
14M-613
Size (MM)
10
11
12
13
Product Code
14M-614
14M-615
14M-616
14M-617
Size (MM)
14
15
16
17
Product Code
14M-618
14M-619
14M-620
14M-621
Size (MM)
18
19
20
21
Product Code
14M-622
14M-623
14M-624
14M-627
Size (MM)
22
23
24
27
MS-14-24RC 2 4 Piece 1/2" Drive Deep 6 Point Impact Socket Set on Clip Rail 20.13 lbs
Contents Include:
Product Code
14M-610
14M-611
14M-612
14M-613
14M-614
14M-615
Size (MM)
10
11
12
13
14
15
Product Code
14M-616
14M-617
14M-618
14M-619
14M-620
14M-621
Size (MM)
16
17
18
19
20
21
Product Code
14M-622
14M-623
14M-624
14M-625
14M-626
14M-627
Size (MM)
22
23
24
25
26
27
Product Code
14M-629
14M-630
14M-632
14M-634
14M-635
14M-636
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
!
34
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Size (MM)
29
30
32
34
35
36
MS-14-16RC
Sockets &
Drive Tools
tools at height
1/2" Drive deep Impact Sockets, 12 Point, MM
Black Industrial Finish
35925
A
Overall
Product
Length
Code Size (MM) (Inches)
35910
10
3 1⁄4
35911
11
3 1⁄4
35912
12
3 1⁄4
35913
13
3 1⁄4
35914
14
3 1⁄4
35915
15
3 1⁄4
35916
16
3 1⁄4
35917
17
3 1⁄4
35918
18
3 1⁄4
35919
19
3 1⁄4
35920
20
3 1⁄4
35921
21
3 1⁄4
35922
22
3 1⁄4
35923
23
3 1⁄4
35924
24
3 1⁄4
35925
25
3 1⁄4
35926
26
3 1⁄4
35927
27
3 1⁄4
35928
28
3 1⁄4
35929
29
3 1⁄4
35930
30
3 1⁄4
35932
32
3 1⁄4
35933
33
3 1⁄2
35934
34
3 1⁄2
35935
35
3 1⁄2
35936
36
3 1⁄2
35910
B
Drive End
Diameter
(Inches)
7
⁄8
7
⁄8
7
⁄8
15
⁄16
15
⁄16
1
1
1
1
3
1 ⁄16
3
1 ⁄16
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
C
Working
End Diamter
(Inches)
5
⁄8
5
⁄8
3
⁄4
3
⁄4
3
⁄4
15
⁄16
15
⁄16
1
1
1 1⁄8
1
1 ⁄8
1 1⁄4
1 1⁄4
1 1⁄4
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 5⁄8
1 5⁄8
1 3⁄4
1 7⁄8
1 7⁄8
2
2
D
Broach
Depth
(Inches)
5
⁄8
5
⁄8
5
⁄8
5
⁄8
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
1
1
1
1
1
1
1
1
1
1
1
1
1
1 ⁄2
1
1 ⁄2
1 1⁄2
1 1⁄2
E
F
Bolt Clearance
Bolt Clearance
Diameter
Nose Length
Depth (Inches)
(Inches)
(Inches)
3
/
⁄8
2
3
/
⁄8
2
3
/
⁄8
2
1
/
⁄2
2
1
/
⁄2
2
1
/
⁄2
2
1
/
⁄2
/
1
/
⁄2
/
5
/
⁄8
/
5
/
⁄8
/
3
/
⁄4
/
3
/
⁄4
/
3
/
⁄4
/
7
/
⁄8
/
7
/
⁄8
/
7
/
⁄8
/
15
/
⁄16
/
5
15
/
⁄16
⁄8
5
/
1
⁄8
5
/
1
⁄8
5
/
1
⁄8
5
1
/
1 ⁄8
⁄8
5
1
/
1 ⁄8
⁄8
5
1
/
1 ⁄4
⁄8
5
1
/
1 ⁄4
⁄8
5
/
1 1⁄4
⁄8
Weight (lbs)
0.27
0.30
0.33
0.37
0.39
0.40
0.43
0.46
0.50
0.56
0.59
0.60
0.64
0.68
0.70
0.76
0.80
0.85
0.88
0.90
0.93
0.96
0.98
1.10
1.25
1.40
37926 10 piece 1/2" Drive Impact Shallow 12 Point Socket Set on Clip Rails 3.81 lbs
Contents Include:
Product Code
35910
35911
35912
37926
Size (MM)
10
11
12
Product Code
35913
35914
35915
Size (MM)
13
14
15
Product Code
35916
35917
35918
35919
Size (MM)
16
17
18
19
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 and 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
M
1/2" Drive One Piece Impact Hex Bit Drivers, SAE
1/2" Drive One Piece Impact Hex Bit Drivers, MM
Product Code
35730
35732
35734
35736
Product Code
35706
35708
35710
Black Industrial Finish - OAL1-1/2”
Size (Inches)
1
⁄4
5
⁄16
3
⁄8
7
⁄16
Weight (lbs)
.13
.15
.17
.20
Product Code
35738
35740
35742
Size (Inches)
1
⁄2
9
⁄16
5
⁄8
Weight (lbs)
.21
.24
.27
Fed. Spec: ANSI B107.2
37920 7 Piece 1/2" Drive One Piece Impact Hex Bit Drivers, SAE 1.28 lbs
Contents Include:
Product Code
35730
35732
35734
Size (Inches)
1
⁄4
5
⁄16
3
⁄8
Product Code Size (Inches) Product Code
7
35736
⁄16
35742
1
35738
⁄2
9
35740
⁄16
Size (Inches)
5
⁄8
Black Industrial Finish OAL 1-1/2”
Size (Inches)
6
8
10
Weight (lbs)
.13
.15
.17
Product Code
35712
35714
35717
Size (Inches)
12
14
17
Weight (lbs)
.19
.21
Fed. Spec: ANSI B107.2
37922 6 Piece 1/2" Drive One Piece Impact Hex Bit Drivers, MM 1.18 lbs
Contents Include:
Product Code
35706
35708
Size (MM)
6
8
Product Code
35710
35712
Size (MM)
10
12
Product Code
35714
35717
Size (MM)
14
17
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
35
Sockets &
Drive Tools
tools at height
3/4" Drive Extensions
Chrome and Black Industrial Finish
Product Code
Length (Inches)
Weight (lbs)
Black Industrial Finish
H-104B-TH
H-110B-TH
3
8
0.73
1.70
H-104B-TH
Fed. Spec: ANSI B107.10M
• Chrome plating provides increased protection from rust and corrosion.
• Ball and spring socket retention.
3/4" Drive Integrated Handle Ratchets
Chrome and Black Industrial Finish
Product Code
HB-51B-TH
Description
Length (Inches)
Number of Teeth
Weight (lbs)
Black Finish Ratchet
20 1⁄8
24
6.04
Fed. Spec: ANSI B107.10M
HB-51B-TH
Features
• Forged one-piece ratchet provide strength and safety for industrial applications.
• Smooth comfort-grip handle permits all-day use without gloves.
3/4" Drive Shallow Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
B
C
D
E
Drive End Working End Broach Bolt Clearance
Size
OAL Diameter Diameter
Depth
Depth
Product Code (Inches) (Inches) (Inches)
(Inches) (Inches)
(Inches)
9⁄16
17⁄32
6-618A
2
1 5⁄8
1
1 1⁄32
5⁄8
17⁄32
6-620A
2
1 5⁄8
1 3⁄32
1 1⁄32
11⁄16
17⁄32
6-622A
2
1 5⁄8
1 5⁄32
1 1⁄32
3⁄4
17⁄32
6-624A
2
1 5⁄8
1 1⁄4
1 1⁄32
13⁄16
17⁄32
6-626A
2
1 5⁄8
1 3⁄8
1 1⁄32
7⁄8
19⁄32
6-628A
2
1 5⁄8
1 1⁄2
1 1⁄32
15⁄16
21⁄32
6-630A
2
1 5⁄8
1 9⁄16
1 1⁄32
11⁄16
6-632A
1
2
1 5⁄8
1 5⁄8
1 1⁄32
3⁄4
6-634A
1 1⁄16
2
1 5⁄8
1 11⁄16
1 1⁄32
3⁄4
6-636
1 1⁄8
2 1⁄8
1 5⁄8
1 3⁄4
1 5⁄32
3⁄4
6-638
1 3⁄16
2 1⁄8
1 5⁄8
1 7⁄8
1 5⁄32
13⁄16
6-640
1 1⁄4
2 1⁄8
1 3⁄4
2
1 5⁄32
7⁄ 8
6-642
1 5⁄16
2 1⁄8
1 3⁄4
2 1⁄32
1 5⁄32
7⁄8
6-644
1 3⁄8
2 1⁄4
1 3⁄4
2 1⁄8
1 9⁄32
7⁄ 8
6-646
1 7⁄16
2 1⁄4
1 3⁄4
2 3⁄16
1 9⁄32
15⁄16
6-648
1 1⁄2
2 1⁄4
1 3⁄4
2 1⁄4
1 9⁄32
15⁄16
6-650
1 9⁄16
2 3⁄8
1 3⁄4
2 11⁄32
1 13⁄32
6-652
1 5⁄8
2 3⁄8
1 3⁄4
2 13⁄32
1
1 13⁄32
6-654
1 11⁄16 2 9⁄16
1 3⁄4
2 15⁄32
1 1⁄32
1 19⁄32
6-656
1 3⁄4
2 9⁄16
1 3⁄4
2 17⁄32
1 1⁄32
1 19⁄32
6-658
1 13⁄16
2 5⁄8
1 3⁄4
2 19⁄32
1 1⁄8
1 21⁄32
6-660
1 7⁄8
2 3⁄4
1 3⁄4
2 5⁄8
1 1⁄8
1 13⁄16
6-662
1 15⁄16
2 3⁄4
1 3⁄4
2 3⁄4
1 1⁄8
1 3⁄4
1 3⁄4
2 13⁄16
1 1⁄8
1 13⁄16
6-664
2
2 7⁄8
6-666
2 1⁄16
2 7⁄8
1 3⁄4
2 7⁄8
1 3⁄16
1 13⁄16
6-670
2 3⁄16
3 3⁄16
1 3⁄4
3 1⁄16
1 5⁄16
2 1⁄16
6-672
2 1⁄4
3 3⁄16
1 3⁄4
3 1⁄8
1 3⁄8
2 5⁄32
6-676
2 3⁄8
3 1⁄2
1 3⁄4
3 1⁄4
1 7⁄16
2 7⁄16
F
Bolt Clearance Nose
Uses
Diameter
Length RET RING®
Use
(Inches)
(Inches) Number O-Ring / Pin Weight (lbs)
1⁄2
1
6-1XS
6-1A / 6-2B
0.58
1⁄2
1
6-1XS
6-1A / 6-2B
0.61
1⁄2
1
6-1XS
6-1A / 6-2B
0.62
11⁄16
1
6-1XS
6-1A / 6-2B
0.63
11⁄16
1
6-1XS
6-1A / 6-2B
0.67
11⁄16
1
6-1XS
6-1A / 6-2B
0.73
11⁄16
1
6-1XS
6-1A / 6-2B
0.74
11⁄16
6-1XS
6-1A / 6-2B
0.75
1 1⁄16
1 5⁄16
6-1XS
6-1A / 6-2B
0.73
1 1⁄8
1 7⁄16
6-1XS
6-1A / 6-2B
0.84
1 3⁄16
1 7⁄16
6-1XS
6-1A / 6-2B
0.94
1
7
1 ⁄4
1 ⁄16
6-1XS
6-1A / 6-2C
1.08
5
7
1 ⁄16
1 ⁄16
6-1XS
6-1A / 6-2C
1.06
3
9
1 ⁄8
1 ⁄16
6-1XS
6-1A / 6-2C
1.21
7
9
1 ⁄16
1 ⁄16
6-1XS
6-1A / 6-2C
1.28
1
9
1 ⁄2
1 ⁄16
6-1XS
6-1A / 6-2C
1.29
9
11
1 ⁄16
1 ⁄16
6-1XS
6-1A / 6-2C
1.45
5
11
1 ⁄8
1 ⁄16
6-1XS
6-1A / 6-2C
1.46
7
7
1 ⁄16
1 ⁄8
6-1XS
6-1A / 6-2C
1.69
3
7
1 ⁄4
1 ⁄8
6-1XS
6-1A / 6-2C
1.68
13
15
1 ⁄16
1 ⁄16
6-1XS
6-1A / 6-2C
1.98
7
1
1 ⁄16
2 ⁄16
6-1XS
6-1A / 6-2C
1.85
7
1
1 ⁄16
2 ⁄16
6-1XS
6-1A / 6-2C
2.43
7
3
1 ⁄16
2 ⁄16
6-1XS
6-1A / 6-2C
2.11
7
3
1 ⁄16
2 ⁄16
6-1XS
6-1A / 6-2C
2.13
3
1
2 ⁄16
2 ⁄2
6-1XS
6-1A / 6-2C
2.75
27
1
1 ⁄32
2 ⁄2
6-1XS
6-1A / 6-2C
2.75
27
13
1 ⁄32
2 ⁄16
6-1XS
6-1A / 6-2C
3.20
Fed. Spec: ANSI B107.2
WS-6-10HA 10 Piece 3/4" Drive Shallow 6 Point Impact Socket Set on Clip Rail 26.00 lbs
Contents Include: 1 11/16 to 2 3/8
36
WS-6-14HA 14 Piece 3/4" Drive Shallow 6 Point Impact Socket Set on Clip Rail 13.70 lbs
Contents Include: 3/4 to 1 5/8
6-620A
Sockets &
Drive Tools
tools at height
3/4 " Drive Shallow Impact Sockets, 12 Point, SAE
Black Industrial Finish
A
38444
38430
Product
Code
38420
38422
38424
38426
38428
38430
38432
38434
38436
38438
38440
38442
38444
38446
38448
38450
38452
38454
38456
38458
38460
38462
38464
38466
38468
38476
Size
Overall Length
(Inches)
(Inches)
5
⁄8
2
11
⁄16
2
3
⁄4
2
13
1
⁄16
2 ⁄16
7
1
⁄8
2 ⁄16
15
⁄16
2 1⁄16
1
2 1⁄16
1 1⁄16
2 1⁄16
1 1⁄8
2 1⁄16
1 3⁄16
2 1⁄16
1 1⁄4
2 1⁄16
1 5⁄16
2 1⁄4
1 3⁄8
2 1⁄4
1 7⁄16
2 1⁄4
1 1⁄2
2 1⁄4
1 9⁄16
2 7⁄16
1 5⁄8
2 7⁄16
1 11⁄16
2 7⁄16
1 3⁄4
2 7⁄16
1 13⁄16
2 5⁄8
1 7⁄8
2 5⁄8
1 15⁄16
2 3⁄4
2
2 13⁄16
2 1⁄16
2 13⁄16
2 1⁄8
2 13⁄16
2 3⁄8
3
B
Drive End
Diameter
(Inches)
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 1⁄2
1 5⁄8
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
2 1⁄8
2 1⁄8
2 1⁄8
2 1⁄8
C
Working
End Diamter
(Inches)
1 1⁄8
1 1⁄8
1 1⁄8
1 1⁄4
1 5⁄16
1 7⁄16
1 1⁄2
1 1⁄2
1 5⁄8
1 3⁄4
1 13⁄16
1 13⁄16
2
2
2 1⁄16
2 1⁄4
2 1⁄4
2 1⁄2
2 1⁄2
2 5⁄8
2 5⁄8
2 3⁄4
2 3⁄4
3
3
3 5⁄16
D
E
F
Bolt Clearance
Broach Depth Bolt Clearance Diameter
Nose Length
(Inches)
Depth (Inches)
(Inches)
(Inches) Weight (lbs)
5
7
1
⁄8
/
⁄2
⁄8
0.55
5
7
1
⁄8
/
⁄2
⁄8
0.56
5
7
5
⁄8
/
⁄8
⁄8
0.59
3
15
3
⁄4
/
⁄4
⁄16
0.60
3
15
3
0.64
⁄4
/
⁄4
⁄16
3
15
7
0.68
⁄4
/
⁄8
⁄16
3
7
0.70
⁄4
/
⁄8
/
3
15
0.75
⁄4
/
⁄16
/
3
0.80
⁄4
/
1 1⁄16
/
3
0.82
⁄4
/
1 1⁄16
/
3
15
0.83
⁄4
/
1 3⁄16
⁄16
7
15
0.90
⁄8
/
1 3⁄16
⁄16
15
7
0.95
⁄8
/
1 1⁄4
⁄16
15
7
1.00
⁄8
/
1 3⁄8
⁄16
15
15
1.25
⁄16
/
1 3⁄8
⁄16
15
⁄16
/
1 1⁄2
1
1.37
15
⁄16
/
/
1
1.46
1 1⁄16
/
/
1
1.60
1 1⁄16
/
/
1
1.70
1 1⁄16
/
/
1
1.86
1 1⁄16
/
/
1
1.90
1 5⁄16
/
/
1
2.10
5
1 ⁄16
/
/
1
2.26
1 5⁄16
/
/
1
2.46
1 5⁄16
/
/
1
2.58
1 1⁄2
/
/
1 1⁄16
3.05
38925 9 piece 1/2" Drive Impact Shallow 12 Point, SAE Socket Set on Clip Rails 8.25 lbs
Contents Include:
Product Code
38420
38422
38424
38925
Size (Inches)
5
⁄8
11
⁄16
3
⁄4
Product Code
38426
38428
38430
Size (Inches)
13
⁄16
7
⁄8
15
⁄16
Product Code
38432
38434
38436
Size (Inches)
1
1 1⁄16
1 1⁄8
38926 17 piece 1/2" Drive Impact Shallow 12 Point, SAE Socket Set on Clip Rails 18.55 lbs
Contents Include:
Product Code
38438
38440
38442
38444
Size (Inches)
1 3⁄16
1 1⁄4
1 5⁄16
1 3⁄8
Product Code
38446
38448
38450
38452
Size (Inches)
1 7⁄16
1 1⁄2
1 9⁄16
1 5⁄8
Product Code
38454
38456
38458
38460
Size (Inches)
1 11⁄16
1 3⁄4
1 13⁄16
1 7⁄8
Product Code
38462
38464
38466
38468
38476
Size (Inches)
1 15⁄16
2
2 1⁄16
1
2 ⁄8
2 3⁄8
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 or 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
37
Sockets &
Drive Tools
tools at height
3/4" Drive Hex-Driver Impact Sockets, SAE
Black Industrial Finish
Hex Size
(Inches)
1⁄2
9⁄16
5⁄8
3⁄4
13⁄16
7⁄8
1
1 1⁄8
1 1⁄4
Product Code
38216
38218
38220
38224
38226
38228
38232
38236
38240
A
OAL
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
B
Drive End
Diameter
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
F
Nose
Length
3⁄4
3⁄4
3⁄4
3⁄4
3⁄4
3⁄4
3⁄4
3⁄4
3⁄4
Uses RET RING®
Number
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
Use
O-Ring / Pin
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
6-1A / 6-2C
Weight (lbs)
1.01
1.05
1.10
1.20
1.26
1.30
1.42
1.55
1.50
38932 5 Piece 3/4" Drive Hex-Driver Impact Socket Set 6.65 lbs
on Clip Rail
Contents Include:
Product Code
38220
38224
38226
Size (Inches)
5⁄8
3⁄4
13⁄16
Product Code
38228
38232
38240
38216
Size (Inches)
7⁄8
1
38903 9 Piece 3/4" Drive Hex-Driver Impact Socket Set 13.94
with 50085 Metal Box
Contents Include:
Product Code
38216
38218
38220
38224
38226
Size (Inches)
1⁄2
9⁄16
5⁄8
3⁄4
13⁄16
Product Code
38228
38232
38236
38240
Size (Inches)
7⁄8
1
1 1⁄8
1 1⁄4
Features
•
•
•
•
•
One-piece design maximizes strength and reduces breakage.
Chamfered ends provide easy engagement of the drive tool and fastener.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
!
38
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
38932
Sockets &
Drive Tools
tools at height
3/4" Drive Deep Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
16-624
16-632
B
C
D
E
Drive End Working End Broach Bolt Clearance
Size
OAL Diameter Diameter
Depth
Depth
(Inches) (Inches) (Inches)
(Inches) (Inches)
(Inches)
3⁄4
5
1
9
3
1 ⁄8
1 ⁄4
⁄16
2 1⁄32
13⁄16
5⁄ 8
3
1 5⁄8
1 7⁄16
2 1⁄32
7⁄8
5⁄ 8
3
1 5⁄8
1 7⁄16
2 1⁄32
15⁄16
5⁄8
3
1 5⁄8
1 5⁄8
2 1⁄32
11⁄16
1
3
1 5⁄8
1 5⁄8
2 1⁄32
11⁄16
1 1⁄16
3
1 5⁄8
1 11⁄16
2 1⁄32
3⁄4
1 1⁄8
3
1 5⁄8
1 3⁄4
2 1⁄32
3⁄4
1 3⁄16
3 3⁄16
1 3⁄4
1 15⁄16
2 7⁄32
7⁄8
1 1⁄4
3 1⁄4
1 3⁄4
1 15⁄16
2 9⁄32
7⁄8
1 5⁄16
3 1⁄4
1 3⁄4
2
2 9⁄32
7⁄8
1 3⁄8
3 1⁄4
1 3⁄4
2 1⁄8
2 9⁄32
7⁄8
1 7⁄16
3 1⁄2
1 3⁄4
2 1⁄8
2 17⁄32
15⁄16
1 1⁄2
3 1⁄2
1 3⁄4
2 1⁄4
2 17⁄32
15⁄16
1 9⁄16
3 1⁄2
1 3⁄4
2 5⁄16
2 17⁄32
15⁄16
1 5⁄8
3 1⁄2
1 3⁄4
2 7⁄16
2 17⁄32
1 11⁄16
3 1⁄2
1 3⁄4
2 1⁄2
1
2 17⁄32
1 3⁄4
3 1⁄2
1 3⁄4
2 1⁄2
1
2 17⁄32
1 13⁄16
3 3⁄4
1 3⁄4
2 5⁄8
1 1⁄16
2 3⁄4
1 7⁄8
3 3⁄4
1 3⁄4
2 11⁄16
1 1⁄8
2 3⁄4
2
3 3⁄4
1 3⁄4
2 3⁄16
1 1⁄8
2 3⁄4
Product
Code
16-624
16-626
16-628
16-630
16-632
16-634
16-636
16-638
16-640
16-642
16-644
16-646
16-648
16-650
16-652
16-654
16-656
16-658
16-660
16-664
F
Bolt Clearance Nose
Uses
Diameter
Length RET RING®
(Inches)
(Inches) Number
9⁄16
3⁄ 4
6-1XS
9⁄16
3⁄ 4
6-1XS
5⁄8
3⁄4
6-1XS
5⁄8
6-1XS
21⁄32
6-1XS
3⁄4
5
2 ⁄16
6-1XS
13⁄16
5
2 ⁄16
6-1XS
1 3⁄16
2 1⁄2
6-1XS
1
9
1 ⁄4
2 ⁄16
6-1XS
1 9⁄32
2 9⁄16
6-1XS
3
9
1 ⁄8
2 ⁄16
6-1XS
1 13⁄32
2 13⁄16
6-1XS
1
13
1 ⁄2
2 ⁄16
6-1XS
1 9⁄16
2 13⁄16
6-1XS
5
13
1 ⁄8
2 ⁄16
6-1XS
11
13
1 ⁄16
2 ⁄16
6-1XS
1 3⁄4
2 13⁄16
6-1XS
13
25
1 ⁄16
2 ⁄32
6-1XS
1 7⁄8
2 25⁄32
6-1XS
25
2
2 ⁄32
6-1XS
Use
O-Ring / Pin Weight (lbs)
6-1A / 6-2B
1.18
6-1A / 6-2B
1.15
6-1A / 6-2B
1.24
6-1A / 6-2B
1.10
6-1A / 6-2B
1.10
6-1A / 6-2B
1.16
6-1A / 6-2B
1.49
6-1A / 6-2C
1.69
6-1A / 6-2C
1.72
6-1A / 6-2C
1.63
6-1A / 6-2C
1.85
6-1A / 6-2C
1.91
6-1A / 6-2C
2.14
6-1A / 6-2C
2.04
6-1A / 6-2C
2.47
6-1A / 6-2C
2.32
6-1A / 6-2C
2.20
6-1A / 6-2C
2.62
6-1A / 6-2C
2.68
6-1A / 6-2C
2.82
Fed. Spec: ANSI B107.2
WS-16-7H 7 Piece 3/4" Drive Impact Deep 6 Point Socket Set on Clip Rail 19.25 lbs
Contents Include:
Product Code
16-650
16-652
16-654
16-656
Size (Inches)
1 9⁄16
1 5⁄8
1 11⁄16
1 3⁄4
Product Code
16-658
16-660
16-664
Size (Inches)
1 13⁄16
1 7⁄8
2
WS-16-8H 8 Piece 3/4" Drive Deep 6 Point Impact Socket Set on Clip Rail 12.71 lbs
Contents Include:
Product Code
16-628
16-630
16-632
16-634
Size (Inches)
7⁄8
15⁄16
1
1 1⁄16
Product Code
16-636
16-640
16-642
16-648
Size (Inches)
1 1⁄8
1 1⁄4
1 5⁄16
1 1⁄2
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
39
Sockets &
Drive Tools
tools at height
M
3/4" Drive Shallow Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
B
C
D
E
Drive End Working End Broach Bolt Clearance
Size
OAL Diameter Diameter
Depth
Depth
(MM) (Inches) (Inches)
(Inches)
(Inches)
(Inches)
17⁄32
17
2
1 5⁄8
1 5⁄32
1 1⁄32
17⁄32
19
2
1 5⁄8
1 1⁄4
1 1⁄32
35⁄64
20
2
1 5⁄8
1 3⁄8
1 1⁄32
19⁄32
22
2
1 5⁄8
1 1⁄2
1 1⁄32
11⁄32
24
2
1 5⁄8
1 35⁄64
1 1⁄32
3⁄4
1 11⁄16
1 1⁄32
27
2
1 5⁄8
47⁄64
30
2 3⁄32
1 5⁄8
1 27⁄32
1 1⁄8
3⁄4
31
2 1⁄8
1 5⁄8
1 15⁄16
1 3⁄16
13⁄16
32
2 1⁄8
1 3⁄4
2
1 3⁄16
7⁄8
34
2 1⁄8
1 3⁄4
2
1 3⁄16
7⁄8
35
2 1⁄4
1 3⁄4
2 1⁄8
1 5⁄16
7⁄8
36
2 1⁄4
1 3⁄4
2 1⁄8
1 5⁄16
15⁄16
38
2 1⁄4
1 3⁄4
2 1⁄4
1 5⁄16
1 3⁄4
2 13⁄32
1 1⁄8
1 11⁄16
41
2 5⁄8
46
2 5⁄8
1 3⁄4
2 19⁄32
1 1⁄8
1 21⁄32
Product
Code
6M-617A
6M-619A
6M-620A
6M-622A
6M-624A
6M-627A
6M-630
6M-631
6M-632
6M-634
6M-635
6M-636
6M-638
6M-641
6M-646
Bolt Clearance
Diameter
(Inches)
1⁄ 2
11⁄16
11⁄16
11⁄16
11⁄16
1 1⁄16
47⁄64
1 7⁄32
1 1⁄4
1 21⁄64
1 3⁄8
1 13⁄32
1 1⁄2
1 39⁄64
1 13⁄16
F
Nose
Length
(Inches)
1
1
1
1
1
5
1 ⁄16
1 13⁄32
1 7⁄16
1 7⁄16
1 7⁄16
1 9⁄16
1 9⁄16
1 9⁄16
1 15⁄16
1 15⁄16
MS-6-8H 8 Piece 3/4" Drive Shallow 6 Point Impact Socket Set on Clip Rail 8.27 lbs
Contents Include:
Product Code
6M-619A
6M-622A
6M-624A
Size (MM)
19
22
24
Product Code
6M-627A
6M-630
6M-632
Size (MM)
27
30
32
Product Code
6M-636
6M-641
Uses
RET RING®
Number
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
Use
O-Ring / Pin Weight (lbs)
6-1A / 6-2B
0.63
6-1A / 6-2B
0.64
6-1A / 6-2B
0.69
6-1A / 6-2B
0.74
6-1A / 6-2B
0.68
6-1A / 6-2B
0.70
6-1A / 6-2B
0.95
6-1A / 6-2B
1.10
6-1A / 6-2C
1.04
6-1A / 6-2C
1.14
6-1A / 6-2C
0.99
6-1A / 6-2C
1.26
6-1A / 6-2C
1.36
6-1A / 6-2C
1.24
6-1A / 6-2C
1.58
6M-617A
MS-6-8H
Size (MM)
36
41
Features
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
M
3/4" Drive One Piece Impact Hex Bit Drivers, MM
Black Industrial Finish
Product Code Hex Size (MM)
35810
10
35812
12
35814
14
35817
17
35819
19
35821
21
35824
24
35827
27
35830
30
35832
32
Overall Length
(Inches)
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
3 1⁄2
Drive End Diameter
(Inches)
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
1 3⁄4
Uses RET Ring
Number
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
6-1XS
Nose Length
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
use O-Ring/Pin Weight (lbs)
6-1A/6-2C
0.70
6-1A/6-2C
0.74
6-1A/6-2C
0.79
6-1A/6-2C
0.87
6-1A/6-2C
0.93
6-1A/6-2C
1.00
6-1A/6-2C
1.11
6-1A/6-2C
1.23
6-1A/6-2C
1.35
6-1A/6-2C
1.45
Fed. Spec: ANSI B107.2
38936 10 Piece 3/4" Drive One Piece Impact Hex Bit Drivers, MM 10.96 lbs
Contents Include:
Product Code
35810
35812
35814
35817
!
40
Size (Inches)
10
12
14
17
Product Code
35819
35821
35824
35827
Size (Inches)
19
21
24
27
Product Code
35830
35832
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Size (Inches)
30
32
35812
35830
Sockets &
Drive Tools
tools at height
1" Drive Handles
Chrome and Black Industrial Finish
Product Code
X-41C-TH
X-41C -TH
Description
Flex Handle Breaker Bar, Knurled Grip
Length (Inches)
34 3⁄16
Finish
Chrome
Weight (lbs)
10.93
Fed. Spec: ANSI B107.10M
Features
•
•
•
•
•
Chrome plating provides increased protection from rust and corrosion.
Drive handles provide extra leverage with greater strength than ratchets.
Square drive slides on T-Handles for versatility.
Flex handle flex drive swivels 110° in either direction.
Spring and plunger socket retention.
1" Drive Ratchets
Integrated Handle, Chrome Finish
Product Code
X-51B-TH
Description
Chrome Ratchet
Length (Inches)
20 1⁄8
Number of Teeth
24
Weight (lbs)
6.25
Fed. Spec: ANSI B107.10M
X-51B-TH
Features
•
•
•
•
Forged one-piece ratchet provide strength and safety for industrial applications.
Smooth comfort-grip handle permits all-day use without gloves.
24 tooth gear with 15 degree of engagement allows engagement in tight working areas.
Chrome finish with mirror-like exterior can be easily cleaned after each use.
Square drive tools and accessories – Square drive tools are designed and manufactured with
spring loaded lock buttons. The lock button engages with side lock holes drilled in sockets,
extensions, and adaptors ensuring positive retention.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
41
Sockets &
Drive Tools
tools at height
1 " Drive Shallow Impact Sockets, 12 Point, SAE
Black Industrial Finish
Product
Code
39720
39724
39726
39728
39730
39732
39734
39736
39738
39740
39742
39744
39746
39748
39750
39752
39754
39756
39758
39760
39762
39764
39766
39768
39770
39772
39776
39780
39782
39788
39794
39796
A
B
C
D
E
F
Overall
Working
Bolt Clearance
Size
Length Drive End Diam- End Diamter Broach Depth Bolt Clearance
Diameter Nose Length
(Inches) (Inches) eter (Inches)
(Inches)
(Inches) Depth (Inches)
(Inches)
(Inches) Weight (lbs)
7
5
1
3
⁄8
2 ⁄4
2
1 ⁄16
⁄16
/
/
1
1.27
7
3
1
1
⁄4
2 ⁄4
2
1 ⁄2
⁄16
/
/
1
1.57
7
13
1
1
⁄16
2 ⁄4
2
1 ⁄2
⁄16
/
/
1
1.87
1
7
1
1
⁄8
2 ⁄4
2
1 ⁄2
⁄2
/
/
1
2.17
1
15
1
1
⁄16
2 ⁄4
2
1 ⁄2
⁄2
/
/
1
2.47
1
1
5
1
2 ⁄4
2
1 ⁄8
⁄2
/
/
1
2.77
1
1
1
3
1 ⁄16
2 ⁄4
2
1 ⁄4
⁄2
/
/
1
3.07
5
1 1⁄8
2 1⁄4
2
1 3⁄4
⁄8
/
/
1
3.37
5
3
7
7
1
2
1 ⁄8
⁄8
/
/
1 ⁄6
3.67
1 ⁄16 2 ⁄16
5
1 1⁄4
2 7⁄16
2
2
⁄8
/
/
/
3.97
3
1 5⁄16 2 7⁄16
2 1⁄16
2 1⁄8
⁄4
/
/
1 3⁄16
4.27
3
1 3⁄8
2 7⁄16
2 1⁄16
2 1⁄8
⁄4
/
/
1 3⁄16
4.57
3
1 7⁄16 2 7⁄16
2 1⁄16
2 1⁄4
⁄4
/
/
1 3⁄16
4.87
7
2 7⁄16
2 1⁄16
2 1⁄4
⁄8
/
/
1 3⁄16
5.17
1 1⁄2
7
1 9⁄16 2 7⁄16
2 1⁄16
2 7⁄16
⁄8
/
/
1 3⁄16
5.47
7
1 5⁄8
2 7⁄16
2 1⁄16
2 7⁄16
⁄8
/
/
1 3⁄16
5.77
1 11⁄16 2 1⁄2
2 1⁄16
2 1⁄2
1
/
/
1 3⁄16
6.07
1 3⁄4
2 1⁄2
2 1⁄4
2 1⁄2
1
/
/
1 3⁄16
6.37
13
1
1
5
3
1 ⁄16 2 ⁄2
2 ⁄4
2 ⁄8
1
/
/
1 ⁄16
6.67
7
1
1
3
1
3
1 ⁄8
2 ⁄2
2 ⁄4
2 ⁄4
1 ⁄16
/
/
1 ⁄16
6.97
2 1⁄4
2 3⁄4
1 1⁄16
/
/
1 3⁄16
7.27
1 15⁄16 2 5⁄8
2 1⁄4
2 5⁄16
1 1⁄16
/
/
1 3⁄16
7.57
2
2 3⁄4
2 1⁄16
2 3⁄4
2 1⁄4
2 5⁄16
1 3⁄16
/
/
1 3⁄16
7.87
2 1⁄8
2 3⁄4
2 1⁄4
3 1⁄16
1 3⁄16
/
/
1 3⁄16
8.17
3
3
7
3
3
3
2 ⁄16
2 ⁄4
2 ⁄16
3 ⁄16
1 ⁄16
/
/
1 ⁄16
8.47
1
15
7
1
1
3
2 ⁄4 2 ⁄16
2 ⁄16
3 ⁄4
1 ⁄4
/
/
1 ⁄16
8.77
3
1
7
1
3
3
2 ⁄8
3 ⁄16
2 ⁄16
3 ⁄2
1 ⁄8
/
/
1 ⁄16
9.07
1
3
7
1
3
3
2 ⁄2
3 ⁄16
2 ⁄16
3 ⁄2
1 ⁄8
/
/
1 ⁄16
9.37
9
3
7
5
3
3
2 ⁄16 3 ⁄16
2 ⁄16
3 ⁄8
1 ⁄8
/
/
1 ⁄16
9.67
3
3
7
7
1
1
2 ⁄4
3 ⁄8
2 ⁄16
3 ⁄8
1 ⁄2
/
/
1 ⁄4
9.97
15
3
3
1
5
1
2 ⁄16 3 ⁄4
3 ⁄8
4 ⁄8
1 ⁄8
/
/
1 ⁄2
10.27
3
3
1
5
1
3
3 ⁄4
3 ⁄8
4 ⁄8
1 ⁄8
/
/
1 ⁄2
10.57
39720
Features
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 and 12 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Square drive tools and accessories – Square drive
tools are designed and manufactured with spring
loaded lock buttons. The lock button engages with
side lock holes drilled in sockets, extensions, and
adaptors ensuring positive retention.
!
42
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Sockets &
Drive Tools
tools at height
1" Drive Shallow Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
7-654
Features
• SUPERTORQUE® lobular openings for greater
turning power without deforming the fastener.
• Designed for maximum engagement on
6 point fasteners.
• Suitable for use with pneumatic and electric
impact wrenches.
• Specially heat treated for impact use to
provide long life, safety, and durability.
Product
Code
7-624
7-626
7-628
7-630
7-632
7-634
7-636
7-638
7-640
7-642
7-644
7-646
7-648
7-650
7-652
7-654
7-656
7-658
7-660
7-662
7-664
7-666
7-668
7-670
7-672
7-674
7-676
7-678
7-680
7-682
7-684
7-686
7-688
7-690
7-692
7-694
7-696
7-6100
7-6104
7-6108
7-6112
7-6116
7-6118
7-6120
7-6122
7-6124
7-6126
7-6128
7-6130
7-6132
7-6134
7-6136
7-6138
7-6140
7-6142
7-6144
7-6146
7-6148
7-6152
7-6156
7-6160
7-6172
7-6184
B
C
Drive End Working End
Size
OAL Diameter Diameter
(Inches) (Inches) (Inches)
(Inches)
3
⁄4
2 1⁄8
2 1⁄8
1 7⁄16
13
⁄16 2 1⁄8
2 1⁄8
1 7⁄16
7
⁄8
2 1⁄8
2 1⁄8
1 1⁄2
15
⁄16 2 1⁄8
2 1⁄8
1 19⁄32
1
2 1⁄4
2 1⁄8
1 11⁄16
1 1⁄16 2 1⁄4
2 1⁄8
1 3⁄4
1 1⁄8 2 1⁄4
2 1⁄8
1 7⁄8
1 3⁄16 2 1⁄4
2 1⁄8
1 7⁄8
1 1⁄4 2 3⁄8
2 1⁄8
2
1 5⁄16 2 1⁄2
2 1⁄8
2 1⁄16
1 3⁄8 2 1⁄2
2 1⁄8
2 1⁄8
1 7⁄16 2 1⁄2
2 1⁄4
2 1⁄4
1 1⁄2 2 5⁄8
2 1⁄4
2 11⁄32
1 9⁄16 2 5⁄8
2 1⁄4
2 3⁄8
1 5⁄8 2 3⁄4
2 1⁄4
2 3⁄8
1 11⁄16 2 3⁄4
2 3⁄8
2 19⁄32
1 3⁄4 2 7⁄8
2 3⁄8
2 5⁄8
1 13⁄16 2 15⁄16 2 3⁄8
2 3⁄4
1 7⁄8 2 15⁄16 2 3⁄8
2 3⁄4
1 15⁄16 2 15⁄16 2 3⁄8
2 3⁄4
2
3 1⁄8
2 3⁄8
3
2 1⁄16 3 1⁄8
2 3⁄8
3
2 1⁄8 3 1⁄4
2 3⁄8
3 1⁄8
2 3⁄16 3 5⁄16
2 3⁄8
3 1⁄4
2 1⁄4 3 5⁄16
2 3⁄8
3 1⁄4
2 5⁄16 3 1⁄2
2 3⁄8
3 3⁄8
2 3⁄8 3 1⁄2
2 3⁄8
3 1⁄2
2 7⁄16 3 1⁄2
2 3⁄8
3 1⁄2
2 1⁄2 3 5⁄8
2 3⁄8
3 1⁄2
2 9⁄16 3 5⁄8
2 3⁄8
3 5⁄8
2 5⁄8 3 5⁄8
2 3⁄8
3 3⁄4
2 11⁄16 3 7⁄8
2 3⁄8
3 3⁄4
2 3⁄4 3 7⁄8
2 3⁄8
3 3⁄4
2 13⁄16
4
2 3⁄8
4
2 7⁄8
4
2 3⁄8
4
2 15⁄16 4 3⁄16
2 3⁄8
4 1⁄8
3
4 3⁄8
2 3⁄8
4 1⁄4
3 1⁄8 4 3⁄8
2 3⁄8
4 1⁄4
3 1⁄4 4 3⁄8
2 3⁄8
4 1⁄2
3 3⁄8 4 23⁄32 2 3⁄8
4 5⁄8
3 1⁄2 4 3⁄4
2 3⁄8
4 3⁄4
3 5⁄8 4 3⁄4
2 3⁄8
5
3 11⁄16 4 3⁄4
2 3⁄8
5 5⁄16
3 3⁄4 5 1⁄16
2 3⁄8
5 1⁄8
3 13⁄16 5 3⁄16
2 3⁄8
5 3⁄8
3 7⁄8 5 1⁄4
2 3⁄8
5 1⁄4
3 15⁄16 5 5⁄16
2 3⁄8
5 11⁄32
4
5 3⁄8
2 3⁄8
5 1⁄2
4 1⁄16 5 3⁄8
2 3⁄8
5 1⁄2
4 1⁄8 5 3⁄8
2 3⁄8
5 9⁄16
4 3⁄16 5 1⁄2
2 3⁄8
6
4 1⁄4 5 1⁄2
2 3⁄8
5 3⁄4
4 5⁄16 5 1⁄2
2 3⁄8
5 13⁄16
4 3⁄8 5 5⁄8
2 3⁄8
5 27⁄32
4 7⁄16 5 5⁄8
2 3⁄8
6
4 1⁄2 5 5⁄8
2 3⁄8
6
4 9⁄16 5 5⁄8
3 1⁄4
6 1⁄2
4 5⁄8 5 3⁄4
3 1⁄4
6 13⁄32
4 3⁄4 5 3⁄4
3 1⁄4
6 5⁄8
4 7⁄8
6
3 1⁄4
7
5
6 1⁄4
3 1⁄4
7
5 3⁄8 6 1⁄2
3 1⁄4
7 1⁄2
5 3⁄4 6 1⁄2
3 1⁄4
8 1⁄4
D
E
Broach Bolt Clearance
Depth
Depth
(Inches)
(Inches)
11
15
⁄16
⁄16
11
15
⁄16
⁄16
11
15
⁄16
⁄16
5
15
⁄8
⁄16
11
⁄16
1 1⁄16
11
⁄16
1 1⁄16
11
⁄16
1 1⁄16
11
⁄16
1 1⁄16
3
⁄4
1 3⁄16
7
⁄8
1 5⁄16
7
⁄8
1 5⁄16
29
⁄32
1 5⁄16
15
⁄16
1 15⁄32
15
⁄16
1 7⁄16
1 1⁄16
1 5⁄8
1 1⁄16
1 5⁄8
1 5⁄32
1 23⁄32
1 3⁄16
1 23⁄32
1 3⁄16
1 23⁄32
1 3⁄16
1 23⁄32
1 9⁄32
1 31⁄32
1 9⁄32
1 31⁄32
1 9⁄32
1 31⁄32
1 7⁄16
2 5⁄32
1 7⁄16
2 5⁄32
1 1⁄2
2 5⁄32
1 1⁄2
2 11⁄32
1 1⁄2
2 11⁄32
1 5⁄8
2 15⁄32
1 5⁄8
2 15⁄32
1 5⁄8
2 5⁄16
1 13⁄16
2 15⁄32
1 13⁄16
2 21⁄32
1 13⁄16
2 11⁄16
1 13⁄16
2 11⁄16
2 1⁄32
2 11⁄16
2 1⁄16
3 5⁄16
2 1⁄16
3 5⁄16
2 1⁄16
3 1⁄32
2 1⁄4
3 5⁄16
2 1⁄4
3 11⁄32
2 5⁄16
3 11⁄32
2 7⁄16
3 13⁄32
2 3⁄8
3 21⁄64
2 17⁄32
3 9⁄16
2 9⁄16
3 25⁄32
2 9⁄16
3 25⁄32
2 9⁄16
3 25⁄32
2 15⁄32
2 19⁄32
2 9⁄16
3 25⁄32
2 33⁄64
3 55⁄64
2 5⁄8
3 25⁄32
2 21⁄32
3 25⁄32
2 5⁄8
3 25⁄32
2 43⁄64
3 25⁄32
2 5⁄8
3 25⁄32
2 3⁄4
3 1⁄2
3 1⁄16
3 25⁄32
2 57⁄64
3 29⁄32
3
3 29⁄32
3
4 3⁄16
3 9⁄16
4 5⁄16
3 9⁄16
4 17⁄32
F
Bolt Clearance Nose
Uses
Diameter
Length RET RING®
Use
(Inches)
(Inches) Number O-Ring / Pin Weight (lbs)
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.18
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.43
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.17
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.20
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.33
3
7
⁄4
⁄8
7-2XS
7-1B / 7-2D
1.35
13
7
⁄16
⁄8
7-2XS
7-1B / 7-2D
1.39
13
7
⁄16
⁄8
7-2XS
7-1B / 7-2D
1.36
15
7
⁄16
⁄8
7-2XS
7-1B / 7-2D
1.46
1
1
7-2XS
7-1B / 7-2D
1.52
1 3⁄8
7-2XS
7-1B / 7-2D
1.46
1 7⁄16
7-2XS
7-1B / 7-2D
1.68
1 1⁄2
1 5⁄8
7-2XS
7-1B / 7-2D
2.01
1 9⁄16
1 5⁄8
7-2XS
7-1B / 7-2D
1.86
1 19⁄32
1 3⁄4
7-2XS
7-1B / 7-2D
1.85
1 7⁄32
1 3⁄4
7-3XS
7-1B / 7-2D
2.14
1 7⁄16
1 7⁄8
7-3XS
7-1B / 7-2D
2.47
1 13⁄16
1 15⁄16
7-3XS
7-1B / 7-2D
2.63
1 7⁄16
1 15⁄16
7-3XS
7-1B / 7-2D
2.51
1 3⁄8
1 15⁄16
7-3XS
7-1B / 7-2D
2.57
1 13⁄32
2 1⁄8
7-3XS
7-1B / 7-2D
3.25
1 1⁄2
2 1⁄8
7-3XS
7-1B / 7-2D
3.13
1 5⁄8
2 1⁄4
7-3XS
7-1B / 7-2D
3.50
1 5⁄8
2 5⁄16
7-3XS
7-1B / 7-2D
3.86
1 5⁄8
2 5⁄16
7-3XS
7-1B / 7-2D
3.86
1 3⁄4
2 1⁄2
7-3XS
7-1B / 7-2D
4.20
1 3⁄4
2 1⁄2
7-3XS
7-1B / 7-2D
4.55
1 3⁄4
2 1⁄2
7-3XS
7-1B / 7-2D
4.42
2 1⁄2
2 5⁄8
7-3XS
7-1B / 7-2D
4.36
2 9⁄16
2 5⁄8
7-3XS
7-1B / 7-2D
4.67
1 7⁄8
2 5⁄8
7-3XS
7-1B / 7-2D
4.94
2
2 7⁄8
7-3XS
7-1B / 7-2D
5.24
2 3⁄4
2 7⁄8
7-3XS
7-1B / 7-2D
4.96
2
3
7-3XS
7-1B / 7-2D
6.31
2
3
7-3XS
7-1B / 7-2D
6.07
2 15⁄16
3 1⁄8
7-3XS
7-1B / 7-2D
6.53
2 3⁄8
3 3⁄8
7-3XS
7-1B / 7-2D
7.40
2 3⁄8
3 3⁄8
7-3XS
7-1B / 7-2D
10.76
2 3⁄8
3 3⁄8
7-3XS
7-1B / 7-2D
11.36
2 1⁄2
2 39⁄64
7-3XS
7-1B / 7-2D
12.87
2 1⁄2
2 5⁄8
7-3XS
7-1B / 7-2D
12.60
2 5⁄8
2 19⁄32
7-3XS
7-1B / 7-2D
13.80
2 3⁄4
2 15⁄16
7-3XS
7-1B / 7-2D
16.59
2 5⁄8
3 5⁄32
7-3XS
7-1B / 7-2D
15.98
2 5⁄8
3 23⁄64
7-3XS
7-1B / 7-2D
17.11
2 3⁄4
3 1⁄8
7-3XS
7-1B / 7-2D
14.99
3
3 3⁄16
7-3XS
7-1B / 7-2D
15.80
2 7⁄8
3 15⁄64
7-3XS
7-1B / 7-2D
20.02
3
3 33⁄64
7-3XS
7-1B / 7-2D
22.31
2 7⁄8
3 7⁄32
7-3XS
7-1B / 7-2D
23.52
3
3 41⁄64
7-3XS
7-1B / 7-2D
24.78
3 1⁄8
3 5⁄16
7-3XS
7-1B / 7-2D
23.22
3 3⁄8
3 5⁄16
7-3XS
7-1B / 7-2D
25.31
3 1⁄8
3 39⁄64
7-3XS
7-1B / 7-2D
24.71
2 5⁄8
3 19⁄32
7-3XS
7-1B / 7-2D
26.81
3 1⁄8
3 13⁄32
7-3XS
7-1B / 7-2D
26.83
3 3⁄8
3 17⁄32
8-1XS
7-1C - 7-2F
37.03
3 1⁄8
3 25⁄32
8-1XS
7-1C - 7-2F
39.54
3 1⁄2
3 23⁄32
8-1XS
7-1C - 7-2F
33.36
3 1⁄2
3 31⁄32
8-1XS
7-1C - 7-2F
30.55
3 1⁄2
4 7⁄32
8-1XS
7-1C - 7-2F
32.99
4 43⁄64
4 1⁄4
8-1XS
7-1C - 7-2F
36.90
4
4 9⁄32
8-1XS
7-1C - 7-2F
45.80
Fed. Spec: ANSI B107.2
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
43
Sockets &
Drive Tools
tools at height
1" Drive Deep Impact Sockets, 6 Point, SAE
Black Industrial Finish
A
Product
Code
17-632
17-634
17-636
17-638
17-640
17-642
17-644
17-646
17-648
17-650
17-652
17-654
17-656
17-658
17-660
17-662
17-664
17-666
17-668
17-670
17-672
17-674
17-676
17-678
17-680
17-682
17-684
17-686
17-688
17-690
17-692
17-694
17-696
17-6100
17-6104
17-6108
17-6112
17-6116
17-6118
17-6120
17-6122
17-6124
17-6126
17-6128
17-6130
17-6132
17-6134
17-6136
17-6138
17-6140
17-6142
17-6144
17-6146
17-6148
17-6152
17-6156
17-6160
17-6172
17-6184
B
C
Drive End Working End
Size
OAL Diameter Diameter
(Inches) (Inches) (Inches)
(Inches)
1
3
2 1⁄8
1 19⁄32
3
1
1
1 ⁄16
3 ⁄4
2 ⁄8
1 3⁄4
1 1⁄8
3 3⁄4
2 1⁄8
1 13⁄16
1 3⁄16
3
2 1⁄8
1 13⁄16
1 1⁄4
3 3⁄4
2 1⁄8
1 31⁄32
1 5⁄16
4
2 1⁄8
2 1⁄16
1 3⁄8
4
2 1⁄8
2 1⁄16
1 7⁄16
4
2 1⁄8
2 1⁄4
1 1⁄2
4
2 1⁄4
2 3⁄8
19⁄16
3 1⁄2
2 1⁄4
2 3⁄8
1 5⁄8
4 1⁄4
2 1⁄4
2 7⁄16
1 11⁄16 4 1⁄4
2 1⁄4
2 17⁄32
1 3⁄4
4 1⁄4
2 1⁄4
2 19⁄32
1 13⁄16 4 1⁄2
2 1⁄4
2 11⁄16
1 7⁄8
4 1⁄2
2 1⁄4
2 3⁄4
1 15⁄16 4 1⁄2
2 1⁄4
2 27⁄32
2
4 1⁄2
2 1⁄4
2 29⁄32
2 1⁄16
4 3⁄4
2 1⁄4
3
2 1⁄8
4 3⁄8
2 3⁄8
3 1⁄4
3
13
5
3
2 ⁄16
4 ⁄4
2 ⁄32
3 ⁄32
2 1⁄4
4 3⁄4
2 13⁄32
3 7⁄32
13
5
2 ⁄16
5
2 ⁄32
3 5⁄16
2 3⁄8
5
2 13⁄32
3 3⁄8
2 7⁄16
4 1⁄2
2 3⁄8
3 1⁄2
2 1⁄2
4 1⁄2
2 3⁄8
3 1⁄2
2 9⁄16
4 7⁄8
2 3⁄8
3 5⁄8
2 5⁄8
4 11⁄16
2 3⁄8
3 3⁄4
2 11⁄16 4 11⁄16
2 3⁄8
3 3⁄4
2 3⁄4
5 1⁄8
2 3⁄8
3 3⁄4
2 13⁄16
5 1⁄8
2 3⁄8
4
2 7⁄8
4 7⁄8
2 3⁄8
4
15
7
3
2 ⁄16
4 ⁄8
2 ⁄8
4 1⁄8
1
3
3
5 ⁄8
2 ⁄8
4 1⁄4
3 1⁄8
5 1⁄8
2 3⁄8
4 3⁄8
3 1⁄4
5 3⁄8
2 3⁄8
4 1⁄2
3 3⁄8
5 1⁄2
2 3⁄8
4 5⁄8
3 1⁄2
5 1⁄2
2 3⁄8
4 3⁄4
3 5⁄8
5 1⁄2
2 3⁄8
5
3 11⁄16 5 17⁄32
2 3⁄8
5 5⁄16
3
9
3
3 ⁄4
5 ⁄16
2 ⁄8
5 1⁄4
3 13⁄16 5 31⁄32
2 3⁄8
5 3⁄8
3 7⁄8
5 9⁄16
2 3⁄8
5 1⁄4
3 15⁄16
6 1⁄16
2 3⁄8
5 1⁄2
4
6 1⁄8
2 3⁄8
5 1⁄2
4 1⁄16
6 1⁄8
2 3⁄8
5 1⁄2
4 1⁄8
6 1⁄8
2 3⁄8
5 17⁄32
4 3⁄16
6 7⁄32
2 3⁄8
6
4 1⁄4
6 9⁄32
2 3⁄8
5 3⁄4
5
11
3
13
4 ⁄16
6 ⁄32
2 ⁄8
5 ⁄16
4 3⁄8
6 13⁄32
2 3⁄8
5 27⁄32
7
13
3
4 ⁄16
6 ⁄32
2 ⁄8
6
4 1⁄2
7
2 3⁄8
6
9
1
1
4 ⁄16
7 ⁄8
3 ⁄4
6 1⁄2
5
1
1
13
4 ⁄8
7 ⁄8
3 ⁄4
6 ⁄16
4 3⁄4
6 3⁄4
3 1⁄4
6 5⁄8
7
1
1
4 ⁄8
7 ⁄4
3 ⁄4
7
5
7 3⁄4
3 1⁄4
7
3⁄8
1
8
3 ⁄4
7 1⁄2
5
3
1
5 ⁄4
8
3 ⁄4
8 1⁄4
Fed. Spec: ANSI B107.2
44
D
E
Broach Bolt Clearance
Depth
Depth
(Inches)
(Inches)
3
⁄4
1 13⁄16
1 23⁄32
2 19⁄32
1 25⁄32
2 19⁄32
3
⁄4
1 13⁄16
1 15⁄16
2 19⁄32
2 1⁄32
2 27⁄32
2 1⁄8
2 27⁄32
2 3⁄16
2 27⁄32
2 1⁄4
2 27⁄32
1
2 11⁄32
2 13⁄32
3 3⁄32
2 1⁄2
3 3⁄32
2 9⁄16
3 1⁄32
2 21⁄32
3 9⁄32
2 3⁄4
3 1⁄4
2 13⁄16
3 1⁄4
2 7⁄8
3 7⁄32
2 31⁄32
3 15⁄32
1 5⁄16
3 3⁄16
3 1⁄8
3 7⁄16
3 3⁄16
3 13⁄32
3 9⁄32
3 21⁄32
3 3⁄8
3 5⁄8
1 1⁄2
3 7⁄32
1 5⁄8
3
1 5⁄8
3 1⁄2
5
11
1 ⁄8
3 ⁄32
1 13⁄16
2 1⁄2
3
1 ⁄4
3 5⁄8
1 13⁄16
2 27⁄32
1 13⁄16
3 9⁄16
2 1⁄32
2 11⁄16
2 1⁄32
3 7⁄8
2 1⁄32
3 1⁄32
2 1⁄32
3 1⁄32
2 1⁄4
3 5⁄16
2 1⁄4
4 3⁄32
2 5⁄16
4 3⁄32
2 7⁄16
3 7⁄8
2 1⁄4
3 19⁄32
2 17⁄32
4 11⁄32
2 9⁄16
3 5⁄8
2 13⁄32
4 13⁄32
2 17⁄32
4 3⁄32
2 15⁄32
4 1⁄2
2 17⁄32
4 3⁄32
2 1⁄2
4 9⁄16
2 5⁄8
4 9⁄16
2 21⁄32
4 5⁄8
2 5⁄8
4 9⁄16
2 21⁄32
4 9⁄16
2 3⁄4
5
2 3⁄4
4 19⁄32
13
3
2 ⁄16
4 ⁄32
2 29⁄32
4 29⁄32
3
5 5⁄32
3
5 21⁄32
3 9⁄16
5 25⁄32
3 9⁄16
6 1⁄32
F
Bolt Clearance Nose
Uses
Diameter
Length RET RING®
(Inches)
(Inches) Number
11
7
⁄16
⁄8
7-2XS
3
7
⁄4
⁄8
7-2XS
7
7
⁄8
⁄8
7-2XS
13
7
⁄16
⁄8
7-2XS
7
⁄8
1
7-2XS
1
1
7-2XS
1
1
7-2XS
1
1
2 ⁄4
7-2XS
1
1
1 ⁄8
2 ⁄2
7-2XS
17
1
1 ⁄32
2 ⁄2
7-2XS
1
5
1 ⁄8
2 ⁄8
7-2XS
1
5
1 ⁄4
2 ⁄8
7-3XS
1
7
1 ⁄4
2 ⁄8
7-3XS
1
7
1 ⁄4
2 ⁄8
7-3XS
3
7
1 ⁄8
2 ⁄8
7-3XS
3
1
1 ⁄8
3 ⁄8
7-3XS
3
1
1 ⁄8
3 ⁄8
7-3XS
1
1
1 ⁄2
3 ⁄8
7-3XS
5
3
1 ⁄8
3 ⁄8
7-3XS
1
3
1 ⁄2
3 ⁄8
7-3XS
5
3
1 ⁄8
3 ⁄8
7-3XS
5
1
1 ⁄8
3 ⁄2
7-3XS
3
1
1 ⁄4
3 ⁄2
7-3XS
3
1
1 ⁄4
3 ⁄2
7-3XS
1
1
2 ⁄2
3 ⁄2
7-3XS
7
2
3 ⁄8
7-3XS
11
2
3 ⁄16
7-3XS
11
2
3 ⁄16
7-3XS
1
2
4 ⁄8
7-3XS
1
2
4 ⁄8
7-3XS
7
2
3 ⁄8
7-3XS
7
2
3 ⁄8
7-3XS
3
1
2 ⁄8
4 ⁄8
7-3XS
3
1
2 ⁄8
4 ⁄8
7-3XS
3
3
2 ⁄8
4 ⁄8
7-3XS
1
1
2 ⁄2
4 ⁄2
7-3XS
1
1
2 ⁄2
4 ⁄2
7-3XS
5
1
2 ⁄8
4 ⁄2
7-3XS
3
17
2 ⁄4
4 ⁄32
7-3XS
13
9
2 ⁄16
4 ⁄16
7-3XS
5
31
2 ⁄8
4 ⁄32
7-3XS
9
3
4 ⁄16
7-3XS
1
3
5 ⁄16
7-3XS
7
1
2 ⁄8
5 ⁄8
7-3XS
5
3
5 ⁄32
7-3XS
7
1
2 ⁄8
5 ⁄8
7-3XS
7
3
5 ⁄32
7-3XS
1
9
3 ⁄8
5 ⁄32
7-3XS
3
11
3 ⁄8
5 ⁄32
7-3XS
1
13
3 ⁄8
5 ⁄32
7-3XS
5
13
2 ⁄8
5 ⁄32
7-3XS
1
3 ⁄8
6
7-3XS
3
1
3 ⁄8
6 ⁄8
8-1XS
1
1
3 ⁄2
6 ⁄8
8-1XS
3 1⁄2
5 3⁄4
8-1XS
1
1
3 ⁄2
6 ⁄4
8-1XS
1
3
3 ⁄2
6 ⁄4
8-1XS
21
3 ⁄32
7
8-1XS
4
7
8-1XS
Use O-Ring
/ Pin
Weight (lbs)
7-1B / 7-2D
1.90
7-1B / 7-2D
1.92
7-1B / 7-2D
1.86
7-1B / 7-2D
1.91
7-1B / 7-2D
1.97
7-1B / 7-2D
1.98
7-1B / 7-2D
1.85
7-1B / 7-2D
2.47
7-1B / 7-2D
2.60
7-1B / 7-2D
1.90
7-1B / 7-2D
2.44
7-1B / 7-2D
2.98
7-1B / 7-2D
3.19
7-1B / 7-2D
3.59
7-1B / 7-2D
3.49
7-1B / 7-2D
4.23
7-1B / 7-2D
4.37
7-1B / 7-2D
3.92
7-1B / 7-2D
4.50
7-1B / 7-2D
4.59
7-1B / 7-2D
4.97
7-1B / 7-2D
5.25
7-1B / 7-2D
6.00
7-1B / 7-2D
6.69
7-1B / 7-2D
5.41
7-1B / 7-2D
6.08
7-1B / 7-2D
7.54
7-1B / 7-2D
7.54
7-1B / 7-2D
6.39
7-1B / 7-2D
9.93
7-1B / 7-2D
8.59
7-1B / 7-2D
9.36
7-1B / 7-2D
10.82
7-1B / 7-2D
10.76
7-1B / 7-2D
11.36
7-1B / 7-2D
12.87
7-1B / 7-2D
12.60
7-1B / 7-2D
13.80
7-1B / 7-2D
16.59
7-1B / 7-2D
15.98
7-1B / 7-2D
17.11
7-1B / 7-2D
14.99
7-1B / 7-2D
15.80
7-1B / 7-2D
20.02
7-1B / 7-2D
22.31
7-1B / 7-2D
23.52
7-1B / 7-2D
24.78
7-1B / 7-2D
23.22
7-1B / 7-2D
25.31
7-1B / 7-2D
24.71
7-1B / 7-2D
26.81
7-1B / 7-2D
26.83
7-1C - 7-2F
37.03
7-1C - 7-2F
39.54
7-1C - 7-2F
33.36
7-1C - 7-2F
30.55
7-1C - 7-2F
32.99
7-1C - 7-2F
36.90
7-1C - 7-2F
45.80
17-660
Features
• SUPERTORQUE® lobular openings for greater
turning power without deforming the fastener.
• Designed for maximum engagement on 6 point fasteners.
• Suitable for use with pneumatic and
electric impact wrenches.
• Specially heat treated for impact use
to provide long life, safety, and durability.
Sockets &
Drive Tools
tools at height
M
1" Drive Shallow Impact Sockets, 6 Point, Metric
Black Industrial Finish
A
7M-650
B
C
Drive End Working End
Size
OAL Diameter Diameter
(MM) (Inches) (Inches) (Inches)
27
2 1⁄4
21⁄8
1 3⁄4
30
2 1⁄4
2 1⁄8
1 7⁄8
32
2 3⁄8
2 1⁄8
2
35
2 1⁄2
2 1⁄8
2 1⁄8
38
2 5⁄8
2 1⁄4
2 11⁄32
41
2 3⁄4
2 1⁄4
2 3⁄8
46
2 15⁄16
2 3⁄8
2 3⁄4
50
3
2 3⁄8
2 3⁄4
60
3 1⁄2
2 3⁄8
3 1⁄2
65
3 5⁄8
2 3⁄8
3 5⁄8
70
3 7⁄8
2 3⁄8
3 3⁄4
75
4 3⁄16
2 3⁄8
4 1⁄8
Product
Code
7M-627
7M-630
7M-632
7M-635
7M-638
7M-641
7M-646
7M-650
7M-660
7M-665
7M-670
7M-675
D
E
Broach Bolt Clearance Bolt Clearance
Depth
Depth
Diameter
(Inches)
(Inches)
(Inches)
11⁄16
3⁄4
1 1⁄16
11⁄16
13⁄16
1 1⁄16
3⁄4
15⁄16
1 3⁄16
7⁄8
1 5⁄16
1 3⁄8
15⁄16
1 15⁄32
1 1⁄2
1 1⁄16
1 5⁄8
1 19⁄32
1 3⁄16
1 23⁄32
1 13⁄16
1 1⁄4
1 27⁄32
1 61⁄64
1 1⁄2
2 11⁄32
1 3⁄4
1 5⁄8
2 1⁄8
2 1⁄4
1 13⁄16
2 21⁄32
2 3⁄4
2 1⁄32
2 11⁄16
2 15⁄16
F
Nose
Uses
Length RET RING®
(Inches) Number
7⁄8
7-2XS
7⁄8
7-2XS
7⁄8
7-2XS
7-2XS
1 5⁄8
7-2XS
1 3⁄4
7-2XS
1 15⁄16
7-3XS
2
7-3XS
2 1⁄2
7-3XS
2 5⁄8
7-3XS
2 7⁄8
7-3XS
3 1⁄8
7-3XS
Use
O-Ring / Pin Weight (lbs)
7-1B / 7-2D
1.35
7-1B / 7-2D
1.36
7-1B / 7-2D
1.46
7-1B / 7-2D
1.46
7-1B / 7-2D
1.88
7-1B / 7-2D
1.85
7-1B / 7-2D
2.63
7-1B / 7-2D
2.60
7-1B / 7-2D
4.52
7-1B / 7-2D
4.67
7-1B / 7-2D
4.96
7-1B / 7-2D
6.90
Features
•
•
•
•
•
•
SUPERTORQUE® lobular openings for greater turning power without deforming the fastener.
Designed for maximum engagement on 6 point fasteners.
Suitable for use with pneumatic and electric impact wrenches.
Specially heat treated for impact use to provide long life, safety, and durability.
Drive end features pin retention hole and groove.
Dual marked with corresponding SAE size.
Square drive tools and accessories – Square drive
tools are designed and manufactured with spring
loaded lock buttons. The lock button engages with side
lock holes drilled in sockets, extensions, and adaptors
ensuring positive retention.
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
45
SCREWDRIVERS
tools at height
Slotted Screwdrivers
Premium Comfort Grip Handles and Blades
Product Code
Overall Length
(Inches)
Blade Length
(Inches)
Tip Width
(Inches)
Weight (lbs)
6 1/8
7 7/8
10 11/16
12 11/16
14 3/4
3
4
6
8
10
3 16
1 4
/
/
/
/
7/16
0.17
0.26
0.38
0.59
0.66
SDR-22-TH
SDR-24-TH
SDR-26-TH
SDR-28-TH
SDR-30-TH
5 16
3 8
SDR-24-TH
Features
• Comfort-grip handle with thumb stop allow for added turning
power without discomfort or slippage.
• Hi-polish chrome blades prevent corrosion and can be easily cleaned.
• Vapor-blasted tips grip fasteners and prevent chipping, extending tool life.
• Blades are made from special alloy steel for extra strength.
• *SDS-33 features 3⁄8" heavy-duty square shank
Phillips® Screwdrivers w/Round Blades
Premium Comfort Grip Handles and Blades
Overall Length
(Inches)
6 1/4
7 15/16
12
10 1/2
10 3/4
Product Code
SDP-1-3-TH
SDP-2-4-TH
SDP-2-8-TH*
SDP-3-6-TH
SDP-4-6-TH
Blade Length
(Inches)
3
4
8
6
6
Point
Size
1
2
2
3
4
Weight (lbs)
0.15
0.25
0.30
0.39
0.53
* Does not have Bolster
Features
• Comfort-grip handle with thumb stop allow for added turning power without
discomfort or slippage.
• Hi-polish chrome blades prevent corrosion and can be easily cleaned.
• Vapor-blasted tips grip fasteners and prevent chipping, extending tool life.
• Blades are made from special alloy steel for extra strength.
!
46
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
SDP-2-4-TH
SCREWDRIVERS
pipe wrenches
tools at height
Slotted Screwdrivers
Bi-Mold Comfort Grip Handles
Overall Length
(Inches)
3 7/8
Product Code
24203-TH
Blade Length
(Inches)
1 1/2
Tip Width
(Inches)
3/16
Weight (lbs)
0.09
Features
• Bi-mold handles provide comfortable grip, reducing hand fatigue.
• Handle end shows size and style for easy identification.
24203-TH
Phillips® Screwdrivers
Bi-Mold Comfort Grip Handles
Product Code
24251-TH
24203-TH
Overall Length
(Inches)
Blade Length
(Inches)
Point
Size
3 7/8
1 1/2
2
Weight (lbs)
0.10
Features
• Bi-mold handles provide comfortable grip, reducing hand fatigue.
• Handle end shows size and style for easy identification.
Pipe Wrenches
Aluminum, Heavy Duty
Product Code
13502-TH
13506-TH
Overall Capacity
(Inches)
Maximum Jaw Opening
(Inches)
Hook Jaw
10
14
1 5⁄8
2 9⁄16
13552
13554
Spare Parts
Heel Jaw & Pin
13562
13564
Knurl Nut
13572
13574
Weight (lbs)
0.97
1.96
Features
• Aluminum pipe wrenches are approximately 40% lighter than cast iron.
• Heavy duty construction for strength and durability.
• Scale on wrench indicates pipe diameter.
13506-TH
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
47
pliers
tools at height
ergo® Adjustable Joint Pliers
True Ergonomic Handles with Bi-Molded Grips
Product Code
8223-TH
8224-TH
8225-TH
8226-TH
Overall Length
(Inches)
8
10
12
16
Maximum Jaw Opening
(Inches)
1 1/2
1 3/4
2 5/32
3
Tip Width
(Inches)
9/32
5/16
3/ 8
7/16
Weight (lbs)
0.62
0.75
1.25
2.07
Features
• Comfortable ergonomic two-component handles which combines durability and a
secure non-slip grip.
• Hardened jaws and teeth for exceptionally tough gripping surface.
• One-button setting provides fast and secure jaw width changes with a single touch
of the thumb.
• Wide, deep opening jaws have flat and pipe grip jaw so one pair of pliers can be
used for more jobs.
8224-TH
Locking Pliers
Curved Jaw with Wire Cutter Locking Pliers
Product Code
Overall Length (Inches)
Weight (lbs)
23302-TH
7
23303-TH
10
Convenient one-hand release lever
• Heavy-duty jaw surfaces provide extra gripping power
0.71
1.15
23303-TH
Combination Slip-Joint Pliers
Double-Dipped Plastic Handles
Product Code
Overall Length (Inches)
Jaw Length (Inches)
Tip Width (Inches)
Weight (lbs)
10
1 13/32
1 2
/
1.04
PL-10C-TH
Features
• Multiple parallel jaw positions are locked in to proper groove for superior non-slip
performance.
• Serrated jaws for maximum gripping power.
• Polished heads resist rust and corrosion, extending the tool life.
• Shear type wire cutter extends tool use.
!
48
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
PL-10C-TH
pliers
tools at height
Utility Superjoint Pliers
Double-Dipped Plastic Handles
Features
PL-1519C-TH
PL-1520C-TH
PL-1523C-TH
PL-1524C-TH
Overall Length
(Inches)
5
10
12
16
Maximum Opening
(Inches)
1/2
1 1/2
2 5/8
4
Tip Width
(Inches)
3/16
5/16
1/2
1/2
Weight (lbs)
0.22
0.92
1.50
2.78
Features
• Multiple parallel jaw positions are locked in to proper groove for superior non-slip
performance.
• Serrated jaws for maximum gripping power.
• Polished heads resist rust and corrosion, extending the tool life.
PL-1520C-TH
Industrial Grade Linesman’s Pliers
Double-Dipped Plastic Handles
Product Code
PL-204C-TH
Description
Electrician’s
Overall Length (Inches)
7
Jaw Length (Inches) Weight (lbs)
1/2
.62
Features
• Designed for wiring, electrical equipment installation and maintenance
for utility linemen.
• Polished faces look good and resist corrosion.
• Induction hardened cutting edges stay sharp longer.
• Diamond serrated jaws provide solid grip on wire.
• Double-dipped plastic handle grips are comfortable yet durable.
PL-204C-TH
Wire Twister / Cutter
Produces Right Hand (clockwise) Twists
Product Code
WTC-11-TH
Overall Length (Inches) Jaw Length (Inches)
8.5
1 1/16
Cutting Blade Length
(Inches)
Weight (lbs)
1/4
.53
Features
WTC-11-TH
• Diamond-shaped, flat top jaw serrations hold wire firmly and resist
knicking material being worked on.
• Diagonal nose configurations & “mini” frame allows access in
tight quarters.
• Automatic return feature retracts automatically, speeding up operation use and
reducing operator fatigue.
• Heat-treated cutting edge holds it edge for cutting tough (up to .041)
stainless steel and safety wire.
• One hand operation allows for operator closing and locking with minimum of
handle force.
• High carbon alloy steel forging are used for maximum durability
and long life.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
49
pliers
tools at height
Industrial Grade Diagonal Cutting Pliers
Double-Dipped Plastic Handles
Product Code
PL-46C-TH
Overall Length (Inches)
Cutting Blade Length (Inches)
6
3 4
Weight (lbs)
/
.37
PL-46C-TH
Features
•
•
•
•
Handles are designed to cut wire with ease.
Polished heads resist rust and corrosion, extending the tool life.
Induction hardened cutting edges.
Regular flush cutters are used for cutting hard wire.
Chain Nose Pliers
Double-Dipped Plastic Handles
Product Code
PL-76C-TH
Description
Long Nose w/cutter
Overall Length (Inches)
6 1/2
Jaw Length
(Inches)
1 5/16
Weight (lbs)
.38
Features
PL-76C-TH
• Polished heads resist rust and corrosion, extending the tool life.
• Diamond serrated jaws with industrial hardened cutting edges.
Heavy Duty Front End Wire Strippers
Double-Dipped Plastic Handles
Product Code
23506-TH
Overall Length (Inches)
6 1/4
Capacity
(AWG-solid wire)
10-20
Capacity
(stranded wire)
12-20
Weight (lbs)
.24
Features
• Double-dipped handles with air cushion pockets provide
comfortable grip, reducing hand fatigue.
• Spring-loaded handles speed work and reduce hand effort.
• Serrated gripping jaws in nose for use as pliers.
• 2-piece hardened steel pivot for long life service.
• Lock protects cutting edges in storage.
!
50
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
23506-TH
pliers
punches
tools at height
CABLE CUTTER FOR FERROUS MATERIALS
With Rubber Grips
2520-TH
Product Code
2520-TH
Overall Length
(Inches)
Cable Cutting Capacity (Inches)
22 1/2
1 3/16 Aluminum/Copper with
1/4 Messenger Wire
Replacement
Blade Kit
2520-SH
Weight (lbs)
4.45
Features
• Lightweight handles provide ease of control while offering solid durability.
• Rubber grips offer control and comfort during working application.
• Cutting notch below top cutting blades provided for cuts on
ferrous material.
• Replacement blade kit includes blades, screws, and nuts.
Center Punches
Heavy Duty Industrial Grade
Product Code
Stock Size
Blade Width (Inches)
⁄
⁄
5
6
P-40-TH
P-42-TH
38
12
Features
P-40-TH
• Pierces or marks work by indentation for starting
pilot drills in metal or other materials.
Long Taper Punches
Heavy Duty Industrial Grade
Product Code
P-25-TH
P-28-TH
P-28A-TH
P-25-TH
Stock
Size
Point
Diameter
Length
(Inches)
⁄
⁄
3
⁄4
5 32
14
⁄
⁄
⁄
9
12
15
38
58
14
Weight (lbs)
0.25
0.82
1.50
Features
• Designed for aligning the holes in metal pieces through
which rivets, bolts, or screws will be inserted.
• Not intended for driving pins as punch may become stuck in work.
• Also called line-up aligning or drift punches.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
51
Punches,
Chisels
tools at height
Cape Chisels
Heavy Duty Industrial Grade
Product Code
C-42-TH
Stock
Size
Blade Width (Inches)
Length
(Inches)
⁄
14
⁄
5
38
Weight (lbs)
0.15
C-42-TH
Features
• Designed for cutting or grooving keyholes or slots.
Diamond Point Chisels
Heavy Duty Industrial Grade
Product Code
C-62-TH
Stock
Size
Square
Cut
Length
(Inches)
⁄
38
⁄
7
58
Features
Weight (lbs)
C-62-TH
.56
• Designed for making a V-groove in metal
and to clean out inside corners.
Pin Punches
Heavy Duty Industrial Grade
Product Code
P-4-TH
P-6-TH
P-8-TH
P-10-TH
Stock
Size
Point
Diameter
Length
(Inches)
⁄
⁄
3⁄8
7⁄16
18
3 16
14
⁄
⁄
⁄
5⁄16
4 3⁄4
5 1⁄4
5 3⁄4
6
5 16
5 16
Weight (lbs)
0.09
0.15
0.17
0.24
P-4-TH
Features
• For driving out and removing already loosened pins and
keys after initial movement by a solid or starter punch.
Solid Punches
Heavy Duty Industrial Grade
Product Code
P-14-TH
P-15-TH
P-16-TH
Stock
Size
Point
Diameter
Length
(Inches)
⁄
⁄
⁄
18
5 32
⁄
⁄
⁄
5
5
5
38
38
38
3 16
Weight (lbs)
0.15
0.15
0.16
P-16-TH
Features
• For loosening frozen or tight pins and keys or knocking out rivets.
• Also called starter punches because they are ideal for loosening frozen
pins.
52
!
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
Punches,
Chisels
tools at height
Cold Chisels
Heavy Duty Industrial Grade
Product Code
C-10-TH
Stock Size
C-10-TH
C-12-TH
C-16-TH
C-20-TH
C-24-TH
C-32-TH
Blade Width
(Inches)
Length (Inches)
⁄
⁄
1⁄ 2
5⁄8
3⁄4
1
5
5 1⁄2
6
6 1⁄2
7
8
⁄
⁄
⁄
1⁄2
5⁄8
7⁄8
14
5 16
7 16
5 16
38
Weight (lbs)
0.07
0.13
0.26
0.33
0.59
1.28
Features
• The most commonly used chisels in the chisel line.
• For cutting, shaping and removing metal softer
than the cutting edge of the chisel.
Prick Punches
Heavy Duty Industrial Grade
Product Code
Stock Size
Length (Inches)
⁄
6
P-32-TH
C-32-TH
12
Weight (lbs)
.28
Features
• For scribing lines into metal before cutting or riveting, and
for punching starting holes for short metal screws.
• Point is more tapered than center punch.
17 Piece Punch & Chisel Set
Packed in a Roll Pouch
Product Code
Description
PC-17-TH
17 Piece Punch & Chisel Set
Weight (lbs)
4.93
Contents Include:
Product
Code
P-4-TH
P-6-TH
P-8-TH
P-14-TH
P-15-TH
P-16-TH
P-25-TH
P-28-TH
P-32-TH
P-40-TH
PC-17-TH
Description
Pin Punch
Pin Punch
Pin Punch
Solid Punch
Solid Punch
Solid Punch
Long Taper Punch
Long Taper Punch
Prick Punch
Center Punch
Point
Diameter
(Inches)
1⁄8
3⁄16
1⁄4
1⁄8
5⁄32
3⁄16
5⁄32
1⁄4
-
Product
Code
C-10-TH
C-12-TH
C-16-TH
C-20-TH
C-24-TH
C-42-TH
C-62-TH
Description
Cold Chisel
Cold Chisel
Cold Chisel
Cold Chisel
Cold Chisel
Cape Chisel
Diamond Point
Chisel
Blade
Width
(Inches)
5⁄16
3⁄8
1⁄2
5⁄8
3⁄4
1⁄4
3⁄8
Features
• Heavy duty construction for strength and durability.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
53
tools for
the trades
tools at height
Superior Handsaws with XT Toothing
ergo® handle - Unique XT toothing - Low Friction Coating
Product Code
2700-24-XT7-HP-TH
Blade Length (Inch)
Teeth Per Inch (TPI)
Type of cut
Weight (lbs)
24
7
Aggressive
1.24
Features
• Hard point saw with substantially thicker blade which results in less
power-consuming side vibrations.
• Bevel ground teeth on thick blade for height precision and straight cutting with exceptionally good stability.
• Screwed, one piece two-component ergo® handle.
• Handle placement provides even distribution of power along the tooth line.
• Comes with reusable plastic patented tooth protector.
2700-24-XT7-HP-TH
Professional Hand Hacksaw
Non-Slip Handles Ensures a Solid and Secure Grip.
Product Code
319-TH
Description
Professional Hand Hacksaw
Blade Length (Inches)
12
Weight (lbs)
1.26
Features
• Alternative 55° blade mounting for flush cutting.
• Offers a strong steel frame that is covered with a protective dual
component plastic.
• Comfortable, non-slip back handle and front grip ensures a solid,
secure grip.
• Tension mechanism is fully integrated into the handles so there is no obstruction
during use.
• Supplied with reliable and shatterproof 12 inch bi-metal blade, 24 TPI.
Traditional Hand Hacksaw
Heavy Duty Frame with Blade Storage
Product Code
225-PLUS-TH
Description
Traditional Hand Hacksaw
Blade Length (Inches)
12
Weight (lbs)
1.48
Features
• Allows very high blade tension for accurate and fast cuts.
• Strong rectangular back section for blade storage with easy-to-handle retaining
screws.
• Can also be used as a compass saw.
• Alternative 55° blade mounting for flush cutting.
• Supplied with reliable and shatterproof 12 inch bi-metal blade, 24 TPI.
225-PLUS-TH
!
54
Be sure to use a lanyard that has more weight capacity
than the tool you are attaching because drop forces are
greater than actual tool weight.
tools for
the trades
tools at height
Gasket Scraper
Bi-Mold Comfort Grip Handle
40000-TH
Product Code
40000-TH
Blade Length (Inch)
6
Overall Length
9 3/4
Blade Width
7/8
Weight (lbs)
.32
Features
• Bi-mold handle provides comfortable grip, reducing hand fatigue.
• Ideal for gasket removal and cleaning rust and corrosion.
Mill File (USA Type)-Two Flat Edges
Engineering File
Product
Code
Length
(Inch)
Width
(Inch)
Height
(Inch)
Teeth Per Inch
(TPI)
Type
of Cut
Weight
(lbs)
⁄
44
Bastard
.31
With Bi-Molded Ergo® Handle
1-143-08-1-2-TH
8
⁄
25 32
18
Features
•
•
•
•
Surfaces and edges are single cut.
Suitable for engineering and sharpening file applications.
Can be used for polishing and deburring work in lathes.
Widely used for sharpening tools and implements such as
spades, shovels, hoes, scrapers, etc.
Round File
Engineering File
Product
Code
Length
(Inch)
Width
(Inch)
With Bi-Molded Ergo® Handle
1-230-08-2-2-TH
8
⁄16
5
Height
(Inch)
Teeth Per Inch
(TPI)
Type
of Cut
Weight(lbs)
-
36
Second
.25
Features
• Regularly used for filing holes, large fillets and concave surfaces.
File is tapered to a point and has a double cut.
Any tool that weights more than 5 pounds should be attached to an anchor
point such as a work platform or utility bucket. rather than the operator.
55
Sales Headquarters
Snap-on Industrial Brands
2801 80th Street
Kenosha, WI 53143
Customer Service
Toll Free: USA 800-446-7404
Canada: 800-296-4787
Fax: 800-877-5687
Email: industrialbrands@snapon.com
Distribution Center
Snap-on Industrial Brands
6969 Jamesson Road
Midland, GA 31820
Snap-on Incorporated
©2013 Snap-on Incorporated
TOOLS AT HEIGHT CAT2
march 2013
snapon.com/industrialbrands
Printed in USA