1. No category

OUR VISION
Established in 1992, SHARP EYE surfboards is filling a gap in the market with an unprecedented commitment
to consistency, quality, and customer service.
Since its beginning, founder marcio zouvi has had the vision of creating a company that would have an
open door to the customer. Establishing a friendly enviroment in which the surfer’s satisfaction and feed
back is key.
We try not to be as corporate as some of the competition is, even though we still have to run a business
like everyone else.
We are partner only with the top suppliers in the market for the best materials and invest in experimenting and
testing new construction methods frequently, so our customers would have always what is the leading edge
in technology and surfboard construction.
SHARPEYE SURFBOARDS CATALOG
We are proud to state that all our boards are made 100% in the usa by experienced craftsman that
all together amounts to over one hundred years of experience.
We can guarantee that this is the only reason that SHARP EYE is the company that is today and
we won’t change that for any reason.
DESIGN TECHNOLOGY
SHARP EYE is the first in california to adopt the surfcad system to its production line. As one of the most
advanced system in the industry, surfcad utilizes state-of-the-art software and computer numerical control
machinery.
The software allows the shaper to create the entire design on screen. Rocker, outline, rails, and concaves
are all built according to the shaper’s concept. The machinery pre-cuts blanks with incredible accuracy and
resolution, leaving only the job of fine tuning to the shaper.
As the owner of both the software and machinery, sharp eye has leaped to a complete in-house production,
controlling all phases of the production.
Every single surfboard made by us, either custom or stock, has an id number, which is stored digitally.
This id number offers the customer the unique advantage of ordering the exact same board, or to add some
changes to it, if desired.
The system offers enormous benefits and unlimited possibilities in surfboard design.
I encourage you to check out the difference in one of our dealers!
Dealers list USA et SOUTH AMERICA :
http://www.sharpeyesurfboards.com
Do not litter the public highway - Powered by uwl-communication.com - Photos : Sharp Eye surfboards
Dealers list EUROPE :
http://www.sharpeye-france.com
SHARP EYE Surfboards have been proudly MADE IN USA
by the best craftsmen and the best materials :
Silmar resin, Hexcel S glass, USblanks foam and assisted shape by SURFCAD.
DEAL BY :
SHARP EYE SURFBOARDS
4941 Pacific HWY
SAN DIEGO, CA, 92110
Tel (619) 542-1088 Fax (619) 542-0307
www.sharpeyesurfboards.com Email : contact@sharpeyesurfboards.com
W W W. S H A R P E Y E S U R F B O A R D S. C O M
WWW.SH AR PE Y ESUR FB OARDS. C OM
SMALL WAVE BOARDS
GLIDER GL-1
SB-XF
SHARPEYE SURFBOARDS CATALOG
Board size
5’0” to 7’0”
Tail
squash, round or swallow
Wave size
small to medium
Surfer
beginner to intermidiate
Board size
5’0” To 6’10”
Tail
Squash, round or swallow
Wave size
Small to medium
Surfer
Intermidiate to pro
The glider is one of our top all around designs. It has a wider 1980’s outline combined with a low entry rocker and a triple concave bottom.
Fast and maneuverable for those small summer days. Should be ordered 2 to 4 inches shorter than your normal board and ½ to 1 inch wider.
It has the same rocker and foil as the sb-x without the deep concave. The result is an extremely loose board that turns on a dime. This
design excells in windy beach breaks.
GLIDER GL-3
Board size
5’0 to 7’6”
Tail
double wing swallow
Wave size
small to medium
Surfer
beginner to intermidiate
This design has the same magic rocker as the gl-1. The bottom is a single to a double concave of the tail. The wide nose allows the surfer to
catch waves more easily and creates more stability for those who are learning how to surf. The outline has a double wing ending in a swallow tail.
TWIN FIN PIG-TFP
Board size
5’0” 6’6”
Tail
Wing swallow
Wave size
Small to medium
Surfer
All levels
Designed for very small surfing conditions.
It was inspired by the early 80’s twin fin designs. It has a small trailer fin increasing the drive and projection.It should be ordered 3 to 5
inches shorter than your normal board and ½ to 1 inch wider.It is also available with four channel bottom.
MINI-FUN MF
SB-Z
Board size
5’0” To 6’10”
Tail
Squash, round & swallow
Wave size
Medium to head high
Surfer
Intermidiate to pro
This is another high performance design created for all around surf. This board has a more continuous rocker with a triple concave
combo. The deck is domed with lower rails. Speed and drive for maximum performance.
SB-1
Board size
5’0” To 6’10”
Tail
Squash, round & swallow
Wave size
Medium to head high
Surfer
Intermidiate to pro
It has been the choice of the top pros. The SB-1’s rocker will push performance surfing to the highest level. It has a moderate nose entry with
an extreme tail rocker, subtle single concave and low boxy rails. It performs incredibly weel in good waves as well as average surf.
SB-T “TIPTON MODEL”
Board size
5’0”To 7’0”
Tail
Swallow or round
Wave size
Small to chest high
Surfer
All levels
Board size
5’6” To 6’10”
Tail
Squash, round & swallow
Wave size
Medium to overhead
Surfer
Intermidiate to pro
Made to rip!
This is not a retro design. It was created for high performance small wave surfing. The bottom was updated to allow tighter turns. It has
a low entry rocker and triple concave bottom. The deck if flatt and the rails are full. It can be order with five fins set up.
This board was first created for the tall, experienced surfer.
It has the most extreme rocker of all shortboards and a very distinct forward volume. The results are incredible. It is fast and feels solid
underfoot. We also tried it in smaller versions for some of our team riders, and everyone was stoked.
SBT-S
Board size
5’0” To 6’4”
Tail
Squash, round or swallow
Wave size
Small to chest high
Surfer
All levels
This design was created using the same rocker and foward foil as off the sbt model. It has a deep single concave. We changed the
outline for a more fuller version, similar than the gl1. It has an incredible speed and looseness.
You can ride as a normal shortboard or order 2 to 4 inches shorter than a normal board and ½ to 1 inch wider.
DISCO
SB-6
Board size
5’1” To 6’10”
Tail
Squash, round & swallow
Wave size
Medium to head high
Surfer
Intermidiate to pro
Created for most beach break conditions this design allows easy rail to rail maneuvers and smooth transitions without loss of speed. The
elevated nose rocker suites the front foot surfer like a old shoe. Tested by our team with great feedback.
SB-10
Board size
4’9” To 6’4”
Tail
Wide squash, round or swallow
Wave size
Small to chest high
Surfer
All levels
Board size
5’5” To 6’10”
Tail
Squash, swallow or round
Wave size
Medium to head high
Surfer
Intermidiate to pro
New design created for small to medium surf. It is a high performance small wave board that allows you to surf like your normal short
board.The bottom has the most amount of rocker than all other small wave designs and the outline is wider than the glider model. You
will go fast and turn tight on those small but fun days. It should be order 4 to 6 inches smaller than your regular short board.
It was designed from the glider model aiming for an advanced stronger surfer. The bottom is a deep single concave with a low entry rocker and
low tail lift.It will fell stiff if you have noodle legs but will be the fastest board ever.The rails are full and the outline is wider on the nose area.
BLOWFISH
Board size
4’9” To 6’6”
Tail
Swallow
Wave size
Small to chest high
Surfer
All levels
This design was introduced to allow the surfer to tackle small surfing conditions and rip just like if he was using his shorty.
It has a flatt nose entry rocker and an accelerated tail curve. The rails are normal and the deck is domed allowing easy rail to rail moves.
HIGH PERFORMANCE SHORT BOARDS
GAME CHANGER ! NEW !
BIG GUY PERFORMANCE - BG
Board size
6’6” To 8’0”
Tail
Squash, swallow or round
Wave size
Medium to overhead
Surfer
Beginner to advanced
This is an extended version of our short board. Designed for the big guy who needs the extra volume and width. It is an excellent paddler
and still rides like a shortboard. Suggested width is: 19 to 22 inches.
GUNS
SEMI GUN - SG1
Board size
5’0” To 6’10”
Tail
Squash or round
Wave size
Small to overhead
Surfer
beginner to pro
Board size
6’0” To 7’6”
Tail
Round pin, round &
baby swallow.
Wave size
Medium to double overhead
Surfer Advanced to pro
New Model for 2012, The Game changer was created to bridge the gap between the Disco and the sb-10. It has low entry rocker,
forward foil and deep concave between the fins. A must have board on your quiver.
It was developed targeting large and hollow surf. The bottom is equipped with a reverse vee , double concave combo. It has solid control
but is still loose in the pocket. Don’t book your next surf trip without an SG-1.
SB-X
GUN 1
Board size
5’0” To 6’10”
Tail
Squash, round or swallow
Wave size
Medium to head high
Surfer
Intermidiate to pro
Board size
7’0” To 8’6”
Tail
Round, round pin
and baby swallow
Wave size
Overhead plus
Surfer Advanced to pro
This is the first design of the “x” series. The low nose entry rocker, high tail exit, forward thickness, flatter deck and deeper triple concave
are the main features of this board. It likes to drive off the back foot and go vertical.
For hawaii and big california. For extremely hollow waves such as pipe or puerto. The rocker is continuous with more nose entry. The
bottom is equipped with a reverse vee, double concave combo.