Location Based in Orlando, Florida, Inter Bio-Lab, Inc. is an international supplier of clinical laboratory instruments. About Us We strive to reach the best quality standards in the products we distribute, the renovation and services we provide. We offer new and renovated medical equipment. Our wide range of products includes: Centrifuges Hematology analyzers Urine analyzers Clinical chemistry analyzers and much more. Services Our services are not limited to these models of analyzers. If the device you are looking for is not listed, please contact us. We also provide the following services: Installation Training Preventive and Corrective Maintenance Service. Refurbished Analyzers Clinical Quemistry Immunoassay Hematology Coagulation Cobas Mira Series Elecsys Series Abbott Cell Dyn Series ACL Series Hitachi Abbott AxSyn Series Beckman Coulter Sysmex CA Series Hitachi Modular Series Abbott Architect I Series Micros Series Awareness Chemwell Biomerieux Horiba ABX Pentra Series Siemems ADVIA Series Siemems Immulite Series Siemens Dimension Series Siemems Centaur Series Abbott Architect C Series Horiba Pentra New Laboratory Equipment Urine Analyzer Urine Analyzer Type: Reflectance Photometer Memory Capacity: Up to 2000 samples Software available in English, Portuguese and Spanish Loading Plate Capacity: Up to 10 samples per tray Operation Mode: Quick, General and One by One. Serial communication: RS232 interface port. Multivoltage auto sensing Flexible Keyboard included Optional bar code reader iQ-U300 iQ-UCAL Calibration Strips For iQ - U300 Urine Analyzer use only Size: 25 strips/bottle. iQ-UCAL Calibration after 4 weeks or 500 tests whichever comes first. New Laboratory Equipment Urine Strips Urine strips for iQU300 Analyzer 10 parameter strips (Uribilinogen, Glucose, Bilirubin, Ketones, pH, Blood, Specific Gravity, Nitrite, Protein, Leucocytes.) Size: 100 strips/bottle. iQ-UR10V iQ-UR10A Urine Strips - Visual Reading 10 Parameter strips (Uribilinogen, Glucose, Bilirubin, Ketones, pH, Blood, Specific Gravity, Nitrite, Protein, Leucocytes.) Size: 100 strips/bottle. New Laboratory Equipment Electrolytes Series Analyzers Na/K/CI/Ca/pH/TCO2 Automatic Calibration or “On Demand” Alarms for air bubble detection and waste liquid overflow Measurement method: ISE Measurement time: approximately 40 seconds Minimum sample size: 100uL Sample material used: Serum, Plasma, Whole Blood, Urine and CSF. Memory capacity: Up to 10,000 samples iQ-E60-5s iQ-E60-5 Built - in Thermal printer Power Supply: AC 110-240 V 50/60 Hz 50W Catalog Number Parameters Description (Switchable Power Supply) Dimension/weigh Catalog# iQ-E60-5S iQ-E60-5 Na, K, CL, Ca, pH and Calculated Parameters: nCa, Tca Analyzer with 20 positions auto sampler 40.80x30x23cm 8kg iQ-E60-5s Na, K, CL, Ca, pH and Calculated Parameters: nCa, Tca Analyzer without auto sampler 40.30x23cm 7kg iQ-E60-6 Na, K, CL, Ca, pH, TCO2 and Calculated Parameters: nCa, Tca Analyzer with 20 positions auto sampler 40.80x30x23cm 8kg iQ-E60-3 Na, K, CL Analyzer with 20 positions auto sampler 40.80x30x23cm 8kg iQ-E60-3s Na, K, CL Analyzer without auto sampler 40.30x23cm 7kg New Laboratory Equipment Electrolytes Reagents and Sets iQ - E60 Electrolyte Reagent Set iQ-E60 Electrolyte Reagent Set (1400 mL) iQE60 Electrode Maintenance Solution Set Set content: For iQ-E60 Analyzer Set Standard A Standard B 3x 400 mL 1x 200 mL Set content: Shelf Life after Production 24 months iQ-E60SS Deproteinization Activation iQE60E5 Test per Day Test per Set: Std A: 1,200 mL., Std. B: 200 mL Reagent Consumption mL Stand-by Mode 10 689 1.7 mL 30 989 2.7 mL 60 1041 4.0 mL 100 1190 5.7 mL 3x 10 mL 1x 10 mL New Laboratory Equipment Electrolytes Reagents and Sets iQ - E60 Electrodes Long life Electrodes No filling solution required For iQ - E60 Electrolyte Analyzers Series Sealed Electrolytes Exclusive design and technology Part Number Description iQ-E60REF Reference Electrode iQ-E60Na Na Electrode iQ-E60K K Electrode iQ-E60Cl Cl Electrode iQ-E60Ca iCa Electrode iQ-E60pH pH Electrode New Laboratory Equipment Hematology Analyzers iQ –H360 Hematology Analyzer 3 Part Differential Throughput: Up to 55 tests /hr. 20 Parameters + 3 Histograms Sample volume: Whole Blood: 9.8 μL Prediluted: 20 μL iQ-H360 Memory Capacity: Up to 50,000 sample results Built-in printer. External printer is optional. Touch screen, color LCD 10.4” Operating Environment Temperature: 10ºC - 35ºC Humidity: < 80% Aperture diameter: WBC 80 μm. RBC 50 μm. Power Requirements: AC 110 - 220 V 50/60 Hz 50W Carry over: WBC/RBC/HGB < 0.5% PLT < 1.0%. External Power Supply, therefore low electrical noise. Input / Output ports: RS232, USB, LAN, keyboard and mouse interface. Dimensions: 43.6 x 36.3 x 36.7 cm. Weight: 18kg New Laboratory Equipment Hematology Reagents for iQ-H360 Hematology Reagents Part Number Description Size iQ-H360D-20L Diluent 20L iQ-H360L-0.5L Lyse 500 mL iQ-H360C-1L Cleanser 1L For use on: iQ-H360 Hematology Analyzer only. New Laboratory Equipment Hematology Reagents For use on: CDS/Abbot: Cell Dyn 1700, 1800, 3000, 3200, 3500, 3700 CDS/Beckman Coulter: S Series, S - PLUS series, STKR, MAXM, MAXM A/L, HmX, STKS, GEN - S, T - series, MD series, ONYX Ac.T Diff series. CDS/ABX: Micros 45/60 CDS/Mindray: BC - 2800, BC - 3000, BC - 3200 CDS/Sysmex: KX 21 series CDS - Orphee: Mythic 18 CDS Medonic: CA 620 Controls and calibrators New Laboratory Equipment AUTO HbA1c ANALYZER iQ –a1C AUTO HbA1c ANALYZER Basic Parameters Testing Method Low pressure ion exchange liquid chromatography Testing Item Glycated hemoglobin HbA1c Testing Scope 3% - 18% Testing Parameters Precision (CV) ≤3%. Accuracy (V) ≤1.50% Testing Time 4 minutes (reporting). Full-processing 6 minutes (including cleaning column and recovery time). Sample Type Venous blood (EDTA anticoagulation). Peripheral finger blood. Sample Volume 10 µ l whole blood for each sample. iQ-a1C Functional Parameters Photometer 415nm LED Integral flow colorimeter. Sampling mode Full-auto 25-position sample turntable (20 sample positions, 2 quality control positions, 1 emergency position, 1 cleaning position, 1 zero position. Testing mode Auto test for batch, single test for emergency. Calibration Optional selection of 2 points or 4 points calibration, optional selection of manual or automation. Equiped with 2 groups of high and low level calibrators. Thermostatic control Column and reagent thermostatic control: 25 ± 0.5 °C Reagent matching One piece of column and reagent consumable / 300 pieces of testing samples. Reagent allocation Each standard package includes A,B,C,D eluent, calibrator, hemolytic agent, pump tubing and IC card. New Laboratory Equipment AUTO HbA1c ANALYZER Output Parameters Display 320x240 LCD Graphic Display, displaying real-time testing curve. Printer 58mm Thermal printer, printing testing curve and report. Report Output IFCC concentration value, NGSP area p Data storage 1000 test report (including testing curve). Communication Interface RS232 communication interface, connecting to HIS/LIS system. Instrument Working Characteristics Power Supply AC220V ± 22V 50HZ 65 VA 110-220 VAC 50/60 HZ 65 VA Size 408mm x 390mm x 230mm Weight 8Kg Working Environment Temperature: 12°C - 30°C, relative humidity: ≤85% New Laboratory Equipment AUTO HbA1c ANALYZER Electronic Preheating Device Basic Parameters Temperature control 50 °C ± 1 °C Auto shut-off. Heating mode Thin-film heating. Temperature – control mode Pulse temperature control. Thermometry mode Thermal resistance. Operation mode Star/stop key. Indication mode Red light (on). Heating up mode About 8 mins, 5 mins for heating samples. Electronic Preheating Device Electronic Preheating Device Working Parameters Power Supply Adapter Input: AC100-240 V, 50/60Hz: Output DC24V, 5A Size Ø 147 mm x x140 mm Weight 2.5 Kg Working Enviroment Temperature: 5°C - 40°C; relative humidity: <85% 20 holes dry – type preheating chamber New Laboratory Equipment Clinical Chemistry Analyzer iQ-Candi Clinical Chemistry Analyzer Specifications Assay methods: End Point, Kinetic, Fix time etc. Principle: Photoelectric colorimetry Light Source: Halogen lamp 12V/20W Photometry range: 0~3.2Abs Resolution: 0.0001Abs Wavelength:340nm\405nm\450nm\492nm\510nm\546nm\578nm\6 30nm\700nm\800nm Throughput: 200 tests/hour Reagent tray: 60 reagent positions (include1detergent position,1 dilution position) Sample tray: 45sample positions, including detergent, standard, QC, STAT positions Reaction tray: 120 reaction cuvettes Sample volume: 2~100ul, with 0.1ul increment Reagent volume: R1:10~500uL, R2: 10~500uL,with 0.5uL increment Minimum reaction volume: 180uL Maximum reaction time: 10 minutes iQ-Candy New Laboratory Equipment Clinical Chemistry Analyzer iQ-Candy Specifications Water Consumption: 5L/hour under working status Clean unit: 8-step auto-washing system with detergent Calibration: Calibration reset, select best test point by reaction curve, no need second calibration Line/nonline;multi-standards assay Control rules: Westgard multi-rule, Cumulative sum check, Twin plot 3 level controls for each ifem, analyxing and printing QC analysis diagram Temperature control: incubator 37±0.1Ԩ Power supply: AC 230(1±10%)V, 50/60Hz, 500VA (Step-up transformer for 120 VAC) Ambient: Operating temperature: 10~30Ԩ Relative humidity: ≤85% Atmospheric pressure: 86~106kPa Features 24 hour non-stop cooling system to ensure reagent at 2-8Ԩ Durable ceramic syringes to ensure accuracy & precision High accurate optical system Collision protection in both vertical and horizontal directions, stop & alarm automatically once touching barrier, not affect former tests Automatic eligible cuvettes detection & selection Select best test point by reaction curve, create new factor automatically Support LIS interface New Laboratory Equipment Clinical Chemistry Analyzer iQ-Candy Accurate Sampling(Sample/Reagent) System Collision protection Liquid level detection Internal and external probe washing Probe depth adjustment automatically High performance mixer design Absence of cross contamination Optimal homogenization in minimum time Mixing immediately after dispensing of sample and the second reagent Stable Optical System High accurate, close, static state optical system Spot photometry with high speed digital transmission system Durable cuvettes 8-step auto-washing system with detergent and deion-water to ensure cuvettes clean and decrease cross contamination 120 reaction cuvettes located in a constant temperature incubator Low consumption, open reagent design New Laboratory Equipment Clinical Chemistry Analyzer iQ-Candy Dynamic and real time display of running status Running status of reagent tray, sample tray and reaction tray Real time monitoring of reagent residual volume Intelligent carry over setting to adjust test sequence, STAT test priority Probe depth adjustment automatically Real time monitoring of reaction curve Real time diagnosis of system working status Multi-function sample/reagent tray 60 reagent positions, support 25mL, 50 mL reagent bottle type 45 sample positions including routine, stat, control and standard Various primary tubes and special cups can be used Up to 20 virtual sample tray can be programmed 24 hours nonstop cooling system with peltier element New Laboratory Equipment Clinical Chemistry Analyzer Chemistry Analyzer 6V/10W Halogen - Tungsten lamp 7 Pre-installed filters Bandwidth <10 nm 7” LCD screen Internal thermal printer included, external printer optional. Data input through the instrument keyboard or the virtual keyboard. 130 spaces in memory for tests, 47 of the 130 spaces are preloaded with the most common test. Easy input of up to 6 calibrators. Performs linear and non linear calibrations. The analyzer shows the calibration data for each of the tests. Minimum aspirating volume: 200 μL. Flow cell volume: 30 μL. 6 working modes: End point, Bichromatic end point, End point against a master curve, End point multistandard, Kinetic, and Two points. Memory: 500 patients. RT-9000 New Laboratory Equipment Clinical Chemistry Analyzer Characteristics. STAT FAX 1904 Plus Chemistry Analyzer is easy to use with step-by-step prompting and on-board graphics printer. It has large non-volatile memory to store approximately 60 user programs. By using 1904 Plus Chemistry Analyzer along with Stat Fax 1904 Mosquito flowcell accessory, you can read volumes as small as 250 microliters. It consist of Features. •Bichromatic optics. •Six filters standard. •Cuvette size is 12mm x 75mm. •Performs both endpoint and kinetic assays. •CE certified. •Stat Fax readers use IAD filters. bichromatic optical system with six wavelengths (Six filters standard) including 340nm, preprogrammed calculation facility for both kinetic and endpoint assays and twelve-station 37°C incubation block and temperature controlled read cell. New Laboratory Equipment Clinical Chemistry Analyzer Specifications. Mosquito 2400 Aspiration Flow Cell is powered and controlled from the 1904 - no external power supply needed. Sample volumes from 250uL to 500uL, keyboard selectable. Internal vacuum pump. Cables and connectors included. Stat Fax 2400 Mosquito 2400 Aspiration Flow Cell accessory for 1904. New Laboratory Equipment Clinical Chemistry Analyzer Specifications. Uses 12 mm round tubes, 1 cm square cuvettes, or built-in flow cell. Read cell is temperature controlled to 37°C. Bichromatic reading capability 6 filters standard, with spaces for 2 optional filters (340-700nm). Flip-up 240 x 128 pixel graphic display shows kinetic plots in real time. Use on-board thermal printer, external printer, or PC. Stat Fax 3300 Create a work list, run tests, print patient reports. Stores patient data. Stores control values and creates Levey-Jennings plots for QC. Chemistry Analyzer STAT FAX 3300 Chemistry Analyzer stores control values and creates Levey-Jennings plots for QC. It consist of flip-up display screen - Large 240 x 128 pixel graphical display. IAD filters New Laboratory Equipment Clinical Chemistry Analyzer Specifications. •Accommodates 12mm tubes or cuvettes. •Flowcell included. •Interactive touch-screen LCD with USB mouse option. •Read cell is temperature controlled to 37°C. •Bichromatic reading capability. Stat Fax 4500 •Standard model includes six filters - 340, 405, 505, 545, 580, and 630nm. Chemistry Analyzer The Stat Fax 4500 is a compact, economical, standalone chemistry analyzer. Its streamlined design offers touch screen interface, superb optics, on-board curve-fitting software, and •Alternate filters available from 340nm - 700nm. •On board curve fitting calculations with step-by-step user prompting. •Single point calibration by standard or factor, multipoint calibration, kinetic rate by standard or factor (batch or singly). built-in printer to meet the requirements of •Large non-volatile memory stores 120 user-entered tests. modern laboratories. •IAD filters. •Includes a handy lab timer plus pen. New Laboratory Equipment Clinical Chemistry Reagents The reagent format is liquid and ready to use. The reagents are compatible with manual and automated chemistry analyzer. Available in convenient sizes. Also available Controls and Calibrators. Albumin BUN Alkaline Phosphatase Cholesterol ALT Creatinine AST Glucose Amylase LDH-L HDL Cholesterol Microprotein LDL Cholesterol Total Protein Bilirubin Direct Triglycerides Bilirubin Total Uric Acid New Laboratory Equipment Coagulation Analyzer Coagulometer 4 Channels (up to 4 different tests at a time). Detection Methods: “Light scattering” and “End point percentage”. 5.7” LCD screen. Internal thermal printer. Touch screen or mouse. A storage memory of up to 18 parameters and up to 10,000 results. Quality Control program integrated. RT-2204C Low reagent consumption. Sample Volume required: 25 μL. Reagent Positions: 6 positions. Temperature Control: 37°C ± 0.2°C. Dimensions 41 x 32 x 15 cm. Weight: 10 kg (22lb) New Laboratory Equipment Immunology Analyzer Microplate Washer Allows the wash of plates or strips with flat, V or U base. LCD screen of 90 x 53 mm. Ability to store up to 48 programmable wash protocols. Automatic monitoring of vacuum to avoid blockages or obstructions of fluid. Washer head for 8 positions included with the instrument Optional washer head for 12 positions. Emergency button to stop the washer. Resolution: 50 μL per step. RT-3000 Minimum Residual Volume:5μL for flat base plates, and 1 μL for “U” or “V” base. Operation conditions: 10°C - 30°C. Storage conditions: -25°C - 55°C. Liquid Level Sensor. Low Residual Volume. Dimensions: 405 x 343 x 175 mm. New Laboratory Equipment Immunology Analyzer Microplate Reader Dichromatic readings with 4 wavelengths: 405, 450, 492, and 630 nm. 8 Channel Fiber Optic System. Results in 5 seconds. Software developed in Windows CE. Principle: Absorbance. Measurement range: 0.000 - 2.000 ABS Reading range: 0.000 - 3.500 ABS Precision: 0 - 2 ABS: ± 0.5% or ± 0.005 ABS. RT-6000 Linearity: ± 2% or ± 0.007 ABS. Data input: touch screen or external mouse. Lamp: 8V/50W. Operating conditions: Temperature: 10°C - 40°C. Storage memory: up to 5,000 results. Capable of performing up to 12 different tests on a single plate. Test mode: Automatic with single or double wavelengths. Mixer: speed and time variable. Power Source: 110 - 250 VAC, 50/60 Hz. (Multi voltage) New Laboratory Equipment Immunology Analyzer Features User-programmable open system. User-programmable plate formatting. Fully automatic reading. Reads 96 wells in about 12 seconds. Built-in thermal printer with graphics capability. Interactive touch-screen LCD with USB mouse option. Stat Fax 4200 Microplate Reader The Stat Fax® 4200 is a compact, standalone, 8-channel microplate reader. Its streamlined design offers touch screen interface, rapid reading, superb optics, on-board curve-fitting software, and built-in printer to meet the requirements of modern laboratories. On board data reduction calculations include singleand multi-point curve fitting, including regressions, plus cutoff absorbance calculations, all with step-by-step user prompting. Bichromatic optics. Standard model includes four filters. Six-filter models are available. IAD filters. New Laboratory Equipment Immunology Analyzer Features Compact, Economical, User-programmable, Rapid reading - Amazing power in a little black box! ChroMate is an open system that permits users to program a wide variety of assays. Simply select an assay from the stored menu and load the plate. ChroMate automatically reads the plate, rapidly and precisely measuring absorbance of each welll. Stat Fax Chromate 4300 Microplate Reader ChroMate is a compact, 8-channel microplate reader. Its streamlined design and minimal footprint offers superb optics to fit any size lab bench. ChroMate and your PC team up to provide rapid reading capability and full access to high level software with, reporting, curve fitting, and data storage, to meet the requirements of modern laboratories. ChroMate runs EIA / ELISA and many other applications, with on-board calculations for point-to point, linear and log regressions New Laboratory Equipment Immunology Analyzer Features Now with Auto-Track™ automatic strip transport. User-programmable plate formatting. Now with Auto-Track™ automatic strip transport. Carriers come in two styles, 3x12 for break-apart microwell strips, and an optional 3x8 for non-break-apart microwell strips. Bichromatic reading capability Stat Fax 4700 Microstrip Reader The Stat Fax 4700 is a compact, economical, standalone microstrip reader. Its streamlined design offers touch screen interface, superb optics, on-board curve-fitting software, and built-in printer to meet the requirements of modern laboratories. Standard model includes four filters, six filters are available for a nominal charge. Alternate filters available from 340nm - 700nm. On board curve fitting calculations with step-bystep user prompting for single & multi-point calibration curves, several regression calculations, and a variety of cutoff and control options. Easy loading on-board graphics printer. Large non-volatile memory stores 120 user-entered tests. Stat Fax® readers use IAD filter. New Laboratory Equipment Immunology Analyzer Features Economical- Self referencing – User programmable CLIA for every Lab. The increased range and sensitivity of CLIA (Chemi Luminescent Immuno Assaays) is no longer just for high volume labs. LuMate brings this technology to any size lab. LuMate reads a 96-well microplate and calculates results instantly and automatically. LuMate is an open system that permits users to program a wide variety of glow type CLIAs. Lumate 4400 Microplate Luminometer Lumate is a compact microplate glow luminometer. Its streamlined design with minimal footprint offers superb optics to fit any size lab bench. Lumate teams up with your PC to provide full access to high level software for curve fitting, reporting, and data storage to meet the requirements of modern laboratories. Instrument and software come ready to ‘plug and play’ with your PC. Easy and automatic Simply select an assay from the stored menu and load the plate. LuMate automatically reads the plate, precisely measuring and reporting the light output from each well. LuMate runs hormones and many other applications, with on-board calculations for pointto-point, linear and log regressions, and log logit modes. A built-in reference assures continuous calibration. New Laboratory Equipment Immunology Analyzer Features Automatic strip transport. 3-strip loading capacity for 8-well or 12-well strips. Easy to use with step-by-step prompting and on-board graphics printer. Test names and parameters are stored in a large onboard memory for easy recall. A built-in reference assures continuous calibration. LumiStat 4100 Microstrip Luminometer LumiStat The increased range and sensitivity of CLIA (Chemi Luminescent Immuno Assays) is no longer just for high volume labs. LumiStat, the first CLIA micro strip reader, brings this technology to any size lab On board curve fitting calculations with step-by-step user prompting for single & multi-point calibration curves, several regression calculations, and a variety of cutoff and control options. NRTL and CE certified. New Laboratory Equipment Immunology Analyzer Features No user adjustments required, automatic calibration, alignment, and last row detection.. Large non volatile memory for up to 50 user entered wash protocols; six factory-programmed wash/rinse modes.. Programmable automatic rinse cycle. Stat Wash 2600 Precision operation with constant monitoring of vacuum and pressure. For extra quiet operation, internal pumps cycle on only when needed. Ready to run: 3 bottles, aerosol shield, and 8-probe manifold included. Microplate Washer Stat Fax 2600 Microplate Washer washes flat round and v-bottom plates and strips. New Laboratory Equipment Immunology Analyzer Features Reduce exposure to the potential dangers of splashing biohazards with Stat Wash®, an economical instrument designed to wash immunoassays in microwell strips and plates with professional precision. Washing 8 wells simultaneously is faster, too. Aspirate and dispense functions are controlled by push buttons on the wash wand. Easy to use and maintain, Stat Wash® includes an 8-probe manifold, a 1L wash bottle, and a 1L safe plastic bottle with a full sensor. Stat Wash® is CE certified. Manual Microplate Washer – Stat Wash 3100 New Laboratory Equipment Immunology Analyzer Features Compact and easy to operate. Holds two 96 well microplates for mixing and/or incubating. Digitally controlled 8-speed shaker with orbital mixing from 575 to 1500 rpm. Temperature adjustable from ambient to 40°C with resolution of 0.1°C. Digital timer controls shaking or can be operated Microplate Incubator & Shaker – Stat Fax 2200 independently as a timer. Outer tinted cover provides further insulation and protection from light. NRTL and CE certified. New Laboratory Equipment Centrifuges ULTRA 8V Centrifuge The ULTRA 8V offers variable speeds Accurate speeds for specific g-forces. On/Off switch and Blue LED power indicator light. Auto - off 30 - minute timer with bell. Suction-cupped feet prevent slipping. Timer and lid safety shut -off switch. One-piece metal housing. Dimensions(HXLW) 23 x 33 x 33 cm Weight: 7 kg (15.5 lb) Capacity: 8 tubes (3 to 15 mL) Maximum volume: 120 mL Maximum speed: 3,300 rpm 110 or 220V 50/60 Hz ULC-08AV-1501 New Laboratory Equipment Centrifuges Universal Centrifuge Ideal for blood, urine, and other fluids Variable Speed, 800-3300 rpm With the choice of either an 8 place fixed-angle rotor or a 6 place swing-out rotor, the Universal Centrifuge is the perfect solution for both laboratories and doctors’ offices. Features a ZERO-RPM locking lid for safety and digital programming of time and speed ranging from 800-3300rpm. Achieve up to 1350g with the fixed angle rotor resulting in clean, easy to read lines of separation. The Universal centrifuge has a 110-220v autoswitching power adapter. UNC-08AD-15T3 New Laboratory Equipment Centrifuges Bench top Centrifuge Variable speed from 1000 to 4000 rpm (or 4500). Mechanical timer up to 60 minutes. Anti vibration rubber buffer balances rotor when spinning, which also protects the instrument during transportation. The rotor balance and speed controls are factory calibrated. Rotor for 12 tubes, accepts: 5, 10, 15 mL tubes. Locking latch. Dimensions: 27 x 27 x 25 cm Weight: 8.9 kg (19.6 lb) 110 or 220V 60/50 Hz. PLC-05 New Laboratory Equipment Centrifuges Universal Bench top Centrifuge RoHS compliant Universal multi voltage available: 100-240 V. Rotor imbalance detection alarm. Electronic interlocking lid safety device. Automatic Breaking System Emergency stop. Molded Stainless steel chamber for easy cleaning. Interchangeable Rotors A-1215 (12 x 15 ml) and F-2415 capillaries (24 x 0.75 ml) When Rotor F-2415 is used it becomes a Micro Hematocrit Centrifuge PLC-036 Dimensions: 32 x 40 x 31cm Weight: 16 kg(35.2lb) Speed indicator: digital, 3 digit LED Speed control Microprocessor Two (02) digits digital timer: up to 99 minutes. New Laboratory Equipment Centrifuges Universal Bench top Centrifuge Digital speed indicator: 3 digits Speed control: microprocessor. Digital timer: 99 minutes. Interlocking lid safety device. Molded stainless steel chamber for easy cleaning Variable speed up to 12,000 rpm (capillaries) Auto-balance system that eliminates vibrations When Rotor F-2415 is used it becomes a Micro Hematocrit Centrifuge Weight: 18.2kg (40 lb) Dimensions: 31 x 36 x 31cm Break: Toggle switch stops the centrifuge in 15 - 20 seconds. 110 or 220V, 60/50 Hz PLC-012E New Laboratory Equipment Centrifuges Universal Bench top Centrifuge Analog speed indicator Speed control: Microprocessor Digital timer: 99 minutes. Interlocking lid safety device. Variable speed up to 3500 rpm Rotor balance and speed controls re factory calibrated Rotor H - 2415( 24 -15ml) suggested tubes: 16X100mm or 17X120 mm round bottom. Capacity: 24 positions Break: toggle switch stops the centrifuge in 15 – 20 Seconds. Weight: 27.5 kg (60.6 lb) Time: 99 minutes (digital) Electronic Brake 110 or 220 V, 60/50 Hz PLC-024 New Laboratory Equipment Centrifuges Bench top Centrifuge Brushless inductor motor Swing out rotor T-1516 (16 x 15 ml) included. RPM/RCF conversion automatically. Automatic imbalance detection system prevents damage by gently stopping the rotor. Interlocking lid system. Automatic Breaking System. Digital Timer. Dimensions: 36 x 45 x 29.5 cm PLC-025 Weight: 20.4 kg (44.9 lb) Max speed: 5000 rpm Digital speed indicator: 4 digits Digital timer: 99 minutes. Features errors detection: Rotor imbalance, Disengaged Connector, Overload, Driver Overheat, and Motor Overheat. Interchangeable rotors: Swing out and fixed. New Laboratory Equipment Centrifuges Micro Hematocrit Centrifuge Equipped with automatic shutout safety system when it is opened during the operation. Has an efficient engine that accelerates rapidly to reach the same maximum speed (12,000 rpm) in a short time. Air circulates, cooling the system when used for extended times. Manual brake in 10 seconds - 20 seconds. Dimensions: 25 x 29 24cm Weight: 11.2kg (24.6 lb) Capacity: 24 capillaries 0.75 mL Timer: 60 minutes Max speed: 12,000 rpm Includes a reading scale as standard accessory 110 or 220V 60/50Hz KHT410 New Laboratory Equipment Centrifuges Micro Hematocrit Centrifuge Equipped with automatic shutout safety system when it is opened during the operation. Has an efficient engine that accelerates rapidly to reach the same maximum speed (12,000 rpm) in a short time. Air circulates , cooling the system when used for extended times. Manual brake in 10 seconds Dimensions: 25 x 26 x 24 cm Weight: 7.4kg (16.3lb) Capacity: 24 tubes de 0.75 mL milicapilares Speed Control: 60 minutes Max speed: 12,000 rpm Hematocrit reader: visual included KHT -400 New Laboratory Equipment Incubators Acrylic Door Incubator Designed for microbiology cultures See thru tinted acrylic door Exterior is ivory baked on enamel. Beakers, flasks, Petri dishes and test tube trays can be processed at the same time Chrome plated adjustable shelf and fixed bottom shelf Capacity: 0.7 cubic feet Internal dimensions: 30.5 x 25.4 x 25.4cm External dimensions: 33 x 41 x 27 cm Temperature range: ambient to 62°C Temperature staability: ± 0.5°C Weight: 22 kg (48.5lb) 110 or220V, 60/50 Hz 10 -140 New Laboratory Equipment Incubators Acrylic Door Incubator Designed for microbiology cultures See thru tinted acrylic door Exterior is ivory baked on enamel. Beakers, flasks, Petri dishes and test tube trays can be processed at the same time Chrome plated adjustable shelf and fixed bottom shelf Capacity: 2.0 cubic feet Internal dimensions: 45.8X40.6X30.5cm External dimensions: 48.3X53.4X33.1cm. Temperatures up to 65°C Temperature stability: ± 0.5°C Weight: 22 kg (48.5lb) 110 or 220 V, 60/50 Hz 12-140 New Laboratory Equipment Incubators Portable Mini Lab Incubator Overall dimension 200 x 182 x 170mm N. weight 2.65 kg (5.83 Lbs.) approx. Chamber Stainless steel double chambers. Temperature sensor PT‐100 Temperature sensor PT‐100 Temperature control PID Temperature control PID Working temperature 30‐ 50°C IN-602 Working voltage DC 11.5V‐ 13.5V Timer Digital 36 hours Temperature accuracy ±0.2°C Display LCD digital Temperature stability ±0.2°C Heating element Heating foils, 7W, 0.6A Preset Yes, 3 sets programmable memories Capacity 2 chambers, each for 6 x 250m I Petri‐dishes Safety devices ‐ Overheat alarm: 3°C above set point Alarm and power shutout Stop heating when voltage down to 11.2V Quality standard 1809001, 18013485, GMP, FDA, CE marking New Laboratory Equipment Ovens Gravity Convention Oven Cabinets are as attractive as durable. They have heavy steel double wall construction. Exteriors are painted light gray and have a hard, scratch resistant hammer finish. Doors open with high impact thermoplastic handles. All ovens are made with UL and CSA approved components. The control panel is equipped with an illuminated ON/OFF rocker switch and a heat/cycle pilot light. Temperature is controlled by an hydraulic thermostat Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it more evenly. Capacity: 1.27 cubic feet Internal dimensions: 33 x 33 x 33 cm External dimensions: 38 x 53 .5 x 38 cm Temperatures up to 225°C Weight: 25 kg (55.71 lb) 20-GC New Laboratory Equipment Ovens Gravity Convention Oven Cabinets are as attractive as durable. They have heavy steel double wall construction. Exteriors are painted light gray and have a hard, scratch resistant hammer finish. Doors open with high impact thermoplastic handles. All ovens are made with UL and CSA approved components. The control panel is equipped with an illuminated ON/OFF rocker switch and a heat/cycle pilot light. Temperature is controlled by a bi-metal thermostat Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it more evenly. Capacity: 0.7 cubic feet Internal dimensions: 30.5 x 25 x 25 cm External dimensions: 33.5 x 43 .5 x 30.5 cm Temperatures up to 225° C Weight: 25 kg (55.71 lb) 110 or 220V, 60/50 Hz 10-GC New Laboratory Equipment Dry Baths Dry Bath Incubator The surface of the blocks has been built with materials that allow uniform temperature distribution. The blocks can be easily removed. The light indicates the status of temperature control Dimensions: 21 x 23.5 x 11.5 cm Temperature accuracy: ± 0.2 °C Temperature range: 25°C to 105°C Temperature uniformity at 37°C: ± 0.5 °C Positions: 20 positions of 13mm diameter each. Weight: 2.1kg (4.6 lb) 110 or 220 V, 60/50 Hz DB-005 New Laboratory Equipment Dry Baths Dry Bath Incubator The surface of the blocks has been built with materials that allow uniform temperature distribution The blocks can be easily removed The light indicates the status of temperature control. Dimensions: 37 x 24 x 10.5 cm. Uniformity: ± 0.2 at 37°C Temperature accuracy: ± 0.2 °C Temperature range: 25°C to 105°C Temperature uniformity at 37°C: ± 0.5°C 3 Blocks Positions: each block contains 20 positions to 13mm diameters c/u Weight: 3.3 kg (7.3lb) 110 or 220 V, 60/50 Hz DB-006 New Laboratory Equipment Dry Baths Blocks Available: Number Tube Size Openings No. /0 Stainless steel Gable Lid DB-0630 6mm 30 / 6.5mm Stainless steel concentric rings with lid DB-1020 10mm 20 / 10.5mm Rings of inner diameter: 107, 80, 55, 31.5, 21mm DB-1220 12 or 13mm 20 / 13.5mm (5 openings for 22 L and 2 openings for 11 L DB-1612 15 or 16mm 12 / 16.6mm Stainless steel mesh tube rack DB-1812 18mm 12 / 18.6mm 13 mm x 40 wells (or 20 wells) DB-2012 20mm 12 / 20.7mm 18 mm x 40 wells (or 10 wells) DB-2506 25mm 6 / 25.7mm DB-15E-20 1.5ml Eppendorf 20 DB-053-12 0.5ml Eppendorf 20 DB-COM-3 (Combination) 25+12+6mm or your request 3+5+6 holes DB-000 Solid (no holes) used as HOT PLATE Block size 100W x 75D x 50L (mm) New Laboratory Equipment Water Baths Water Bath Thermostatic temperature with 5°C above ambient to 100°C Molded bath with rounded corners and seamless stainless sides ensures efficient circulation and easy cleaning. Equipped with immersion heating element sheathed with stainless steel Temperature uniformity by rotating water stirrer to direct flow to various areas. Built-in microprocessor based digital controller Audible and visual alarm. Timer starts to work when the set temperature has been stabilized Drain valve and perforated tray are optional for extra cost to meet your requirement. Overheat shutout 2°C to set point Lid not included. Volume: 2L to 11L. Dimensions 22L: 50 x 29 x 15.5 cm Temperature settings: Digital YCW-010 New Laboratory Equipment Water Baths Water Bath Thermostatic temperature with 5°C above ambient to 100°C Molded bath with rounded corners and seamless stainless steel sides ensure efficient circulation and easy cleaning. Equipped with immersion heating element sheathed with stainless steel. Improved temperature uniformity by rotating water stirrer to direct flow to various areas in the tank. Volume: 11L. Includes mercury thermometer for direct readout. Maximum temperature: 100 °C Temperature uniformity is greatly improved by a perforated heat shield which absorbs radiant heat and distributes it more evenly. YCW-04M When the selected temperature is reached a light turns on. Over-heat shut off. Includes lid. Dimensions: 30 x 24 x 15 cm Temperature settings: analog. 110 or 220 V, 60/50 Hz New Laboratory Equipment Water Baths Water Bath Thermostatic temperature with 5°C above ambient to 100°C Molded bath with rounded corners and seamless stainless steel sides ensure efficient circulation and easy cleaning. Equipped with immersion heating element sheathed with stainless steel. Improved temperature uniformity by rotating water stirrer to direct flow to various areas in the tank. Volume: 5L Includes mercury thermometer for direct readout. Maximum temperature: 100 °C When the selected temperature is reached a light turns on. YCW-05M Overheat shut off. Lid not included. Dimensions: 30 x 24 x 15 cm Temperature settings: analog. Temperature control: On /Off 110 or 220 V, 60/50 Hz New Laboratory Equipment Shakers Pipette Shaker It has 4 rubber feet that absorb movement, and prevent from slipping and creeping due to the vibrations. Equipped with a 2 prong pipette clamp for 6 pipettes operation. 2 operation modes: a. Switch activated for continuous operation b. Timer activated operation to a preset time (up to 60 minutes) Oscillation speed: Fixed at 1500 rpm. Dimensions: 14 x 17 x 15.5 cm Weight: 2.4 kg (5.3 lb) Capacity: 6 positions Timer: 60 minutes. 110V, 50/60Hz or 220V, 50/60Hz Catalog #: PS-2A New Laboratory Equipment Shakers Pipette Shaker It has 4 rubber feet that absorb movement, and prevent from slipping and creeping due to the vibrations. 8 Pipettes can be used simultaneously. Oscillation speed: Variable speed by turning the speed regulator. Dimensions: 17.5 x 16X 11.5cm Weight: 1.6 kg (3.5 lb) Capacity: 8 positions Speed: 0 to 3200 rpm 110V, 50/60Hz or 220V, 50/60Hz Catalog #: PS-8B New Laboratory Equipment Shakers Orbital Shaker Ideal for mixing test solutions in micro titration assays, and also for use in virology, immunology, serology, and hematology within the range of 75 to 250 rpm Operates continuously or uses a set time for intermittent shaking up to 60 minutes Countered platform allows the VRN-210 to hold three 96 well micro plates Dimensions: 21.5 x 20 x 13 cm Platform: 21.5 x 17.5 cm Speed: 75 to 230 rpm. Fixed speed: 130 rpm Weight: 2.2 kg (4.8 lb) 110V, 50/60Hz or 220V, 50/60Hz Catalog # : VRN-210 New Laboratory Equipment Shakers Orbital Shaker Provides a desired level of shaking from a gentle rotation to a vigorous agitation for virological, immunological serological and hematological application within the range from 75 – 250 rpm for mixing test tubes, wells or flasks Applications for Alpha, Kline, Mazzini, Syphilis, Pregnancy among others. Operates continuously or uses a set time for intermittent shaking up to 60 minutes. Countered platform allows the VRN--360 to hold six 96--well micro plates. Tachometer speed readout. Dimensions: 30 x 32 x 20 cm Platform: 26.5 x 26.5cm Weight: 3.2 kg (7 lb) Speed: 75 to 250 rpm Fixed speed: 130 rpm 110V, 50/60Hz or 220V, 50/60Hz VRN-360 New Laboratory Equipment Mixers Vortex Mixer (Shaker Type Vortex) Variable speed controls: 0-3150 rpm for gentle or vigorous mixing. 2 Operation modes: a. “TOUCH” for intermittent operations. b. “SWITCH” for continuous mixing. Stirring intensity can be controlled in “TOUCH” mode by applying the pressure to the mixing pad. Heavy cast iron body provides long lasting operation and rubber feet prevent mixer from slipping and creeping due to vibration. Dimensions: 13 x 16.5 x 18 cm Speed: 0 a 3,150 rpm Weight: 5kg (11lb) 115V, 50/60Hz or 230V, 50/60Hz Catalog # : VM-300 New Laboratory Equipment Mixers Vortex Mixer (Shaker Type Vortex) Variable speed controls: 0-3,200 rpm for gentle or vigorous mixing. 2 Operation modes: a. “TOUCH” for intermittent operations. B. “SWITCH” for continuous mixing Stirring intensity can be controlled in “TOUCH” mode by applying the pressure to the mixing pad. Heavy cast--iron body provides long lasting operation and rubber feet prevent mixer from slipping and creeping due to the vibration. Dimensions: 14.5 x 17 x 18.5 cm Speed: 0 a 3,200 rpm Weight: 3.8kg (8.4 lb) 115V, 50/60Hz or 230 V, 50/60Hz Catalog # : VM-300P New Laboratory Equipment Mixers Roller Mixer 3-Dimentional Rocking & Rolling VM‐370 Roller Mixers have been designed with functions, reliability and safety in mind, providing a gentle and quiet rocking and rolling mixing at a fixed speed of 40 rpm for blood samples, Reagents, viscous substances and others that rocking and rolling action is required. The rocking and rolling action is motioned simultaneously by the built‐in POM gears quietly and smoothly. 19mm diameter eccentric to produce 3‐ dimension rocking at both sides. Operate continuously or set time for intermittent operation up to 180 minutes. VM-370 New Laboratory Equipment Mixers Rocking Shaker 3-Dimentional Motion Digital Timer Rocking motion shakers provide a rocking motion or a consistent 3‐dimensional rocking motion. Use for gentle and uniform mixing of blood samples, cell suspensions, dye fixations and solutions in test tubes, flasks, or bottles. Ideal for applications requiring gentle, low‐foaming agitation and uniform mixing of lab samples ‐ immunoassays, hybridizations, mixing blood samples, cell cultures and DNA extractions. Select from fixed‐speed, fixed‐shaking angel or adjustable‐speed angle give you maximum control over sample agitation to meet your application purpose. Comes with a 30 x 30cm dimpled non‐slip rubber mat suitable for different tubes simultaneously. Apply to different tubes up to 11 mm diameter. Adjustable "tilt" lets you choose rotation angle and circulate liquid up/down/sideways and around ensuring complete mixing. Digital timer up to 99 minutes display and adjustable with 1 minute resolution. Shaking angle from horizontal to 20°. Variable speed controls let you adjust the exact agitation desired for staining, blotting and hybridization. Designed for molecular biology applications requiring constant rocking. VRN-380A New Laboratory Equipment Mixers Rocking Shaker 3-Dimentional Motion Select from fixed‐speed, fixed‐shaking angel or adjustable‐speed angle give you maximum control over sample agitation to meet your application purpose. Comes with a 30 x 30 cm dimpled non‐slip rubber mat suitable for different tubes simultaneously. Apply to different tubes up to 11 mm diameter. Adjustable "tilt" lets you choose rotation angle and circulate liquid up/down/sideways and around ensuring complete mixing. Shaking angle from horizontal to 20°. Variable speed controls let you adjust the exact agitation desired for staining, blotting and hybridization. Designed for molecular biology applications requiring constant rocking. Timer up to 180 minutes VRN-380B New Laboratory Equipment Mixers The TRM 18A is an 18 tube rotary mixer with adjustable inclination. A unique clamping device allows the tube to be in place while in circular motion. The tubes are visible during rotation. Get accurate results on your hematology controls. TRM 18A - Rotary Mixer New Laboratory Equipment Mixers The 3DM Orbital Mixer provides all that is required for Thorough mixing in flasks, dishes, petri dishes and boxes. It has a fixed angle of 7º. The speed is constant at 23 RPM. Comes with a smooth non slip mat as standard accessory. 3DM - Orbital Mixer Features Speed: 23 cycles per minute. Heavy duty Non Slip, washable silicon pad Fixed angle at 7º MADE IN USA, One year warranty New Laboratory Equipment Mixers The MMG1 Magnetic Mixer is a flask mixer with speeds up to 2000RPM. Features Capacity: 01 Flask per run. Speed: up to 2000 cycles per minute.. Heavy duty Compact size MMG1 - Magnetic Mixer Front switch makes the work easy MADE IN USA, One year warranty New Laboratory Equipment Differential Counters Differential Electronic Counter 8 keys laboratory counter with totalizer. It facilitates leukocyte differential count (CBC Schilling), including basophils, eosinophils, lymphocytes, monocytes, myelocytes, segmented and band (neutrophils). Each key registers a unit corresponding to the identified leukocyte and a unit to the totalizer. After having counted 100 units of leukocytes, a bell sounds, and then the percentage of every type of leukocytes can be directly read. Pressing 'CLEAR' sets the counter back to zero. Weight: 2.0 kg (4.4lb) Leukocytes : 8 units Control : Electronic DBC-8E New Laboratory Equipment Differential Counters Differential Mechanic Counter 8 keys laboratory counter with totalizer. It facilitates leukocyte differential count (CBC Schilling), including basophils, eosinophils, lymphocytes, monocytes, myelocytes, segmented and band (neutrophils). Each key registers a unit corresponding to the identified leukocyte and a unit to the totalizer. After having counted 100 units of leukocytes, a bell sounds, and then the percentage of every type of leukocytes can be directly read. Rotating the meter in a clockwise directions returns the count back to zero. Weight: 1kg (2.2lb) Leukocytes: 8 units Control: Mechanical DBC- 9 New Laboratory Equipment Blood Rocker The IBL Blood Rocker is a heavy duty rocker, gently rocks blood sample tubes and small vials at 22 RMP. The gentle motion assures mixing without damage to fragile blood cell suspensions. Get accurate results on your hematology controls. Features EBR-16 Capacity: 16 tube. Specifications. Speed: 14 cycles per minute. Item No / Description: EBR-16 Blood Rocker 16 tubes Heavy duty Motor: 12 V DC / 22 RPM Voltage: Universal Power Supply (100-230 V, 50/60 Hz). Non Slip , washable silicon pad Compact size Front switch makes the work easy Actual Dimensions WxDxH:14.6” x 5” x 5.5” Motor maintenance free, no grease required. Actual Weight: 4.5 lb. MADE IN USA, One year warranty Shipping Dimensions WxDxH: 17” x 6” x 6” Shipping Weight: 5 lb. New Laboratory Equipment Microscopes This image cannot currently be display ed. Manufacturer LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific Model REV III A REV III P i-4 Plan Binoc i-4 Plan Trinoc i-4 Sem-Plan Binoc i-4 SemiPlan Trinoc Mi-5 Binoc Mi-5 Trinoc Model # R3M-BN4ADAL3 R3M-BN4ADPL3 I4M-B04A-IPL3 I4M-T04A-IPL3 I4M-B04A-ISL3 I4M-T04A-ISL3 M5M-B05AIPL3 M5M-T05AIPL3 Head Binoc Binoc Binoc Trinoc Binoc Trinoc Binoc Trinoc Objectives 4-10-40-100 DIN Achromatic 4-10-40-100 Plan 4-10-20-40100(oil) Infinity Plan 4-10-20-40100(oil) Infinity Plan 4-10-20-40100(oil) Infinity Semi Plan 4-10-20-40100(oil) Infinity Semi Plan 4-10-20-40100(oil) Infinity Plan 4-10-20-40100(oil) Infinity Plan Nosepiece Quadruple forwardfacing Quadruple forward-facing Reverse Quadruple Reverse Quadruple Reverse Quadruple Reverse Quadruple Reverse Quintuple Reverse Quintuple Stage Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Target Markets Routine Lab, POL, Tech Schools, Universities Routine Lab, POL, Tech Schools, Universities Cytology, Hematology, Oncology, Gynecology, Research, Microbiology Cytology, Hematology, Oncology, Gynecology, Research, Microbiology Cytology, Hematology, Oncology, Gynecology, Research, Microbiology Cytology, Hematology, Oncology, Gynecology, Research, Microbiology Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, IHC New Laboratory Equipment Epifluorescence Microscopes Manufacturer LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific LW Scientific Model Lumin i-4 Plan Binoc Lumin i-4 Plan Trinoc Lumin i-4 SemPlan Binoc Lumin i-4 SemiPlan Trinoc Lumin Mi-5 Binoc Lumin Mi-5 Trinoc Model # I4S-EPB4-IPL3 I4S-EPT4-IPL3 I4S-EPB4-ISL3 I4M-EPT4-ISL3 M5S-EPB5-IPL3 M5M-EPT5-IPL3 Head Binoc Trinoc Binoc Trinoc Binoc Trinoc Objetives 4-10-20-40-100(oil) Infinity Plan 4-10-20-40-100(oil) Infinity Plan 4-10-20-40-100(oil) Infinity Semi Plan 4-10-20-40-100(oil) Infinity Semi Plan 4-10-20-40-100(oil) Infinity Plan 4-10-20-40-100(oil) Infinity Plan Nosepiece Reverse Quadruple Reverse Quadruple Reverse Quadruple Reverse Quadruple Reverse Quintuple Reverse Quintuple Stage Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Target Markets Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC Cytology, Hematology, Oncology, Gynecology, Research, Microbiology, Tuberculosis, Malaria, STD, Pathology, Immunology, IHC New Laboratory Equipment Lumin LMS-040X-D480 Lumin™ kit (Illuminator and 40X universal objective) LMP-4951-L485 Lumin 490nm/510nm LED illuminator The Lumin is easy to install, fits most any microscope, and uses safe light with no harmful UV emissions. By providing low-cost, advanced fluorescence technology that does not necessitate replacing existing equipment, the Lumin allows healthcare workers and laboratory staff to identify Tuberculosis, and other pathogen cases and reduce further infections. LMO-020X-DADR Lumin 20x Objective (no light) LMO-040X-DADR Lumin 20x Objective (no light) LMO-060X-DADR Lumin 20x Objective (no light) LMO-100X-DAOL Lumin 100x OIL Objective (no light) New Laboratory Equipment Epi Lumin Module With integrated LED technology for fluorescence microscopy the new Epi Lumin Fluorescence offers superior clarity. Safe, compact, and easy-to-install on many existing infinity microscopes, the Epi Lumin Module represents a breakthrough in providing affordable fluorescence advances to laboratories worldwide. Try the Epi Lumin Module and experience unparalleled optical quality at an unbeatable price. Advantages Model # Description Easy to install I4P-EPIL-485N Epi Lumin Fluorescence Module on i4 Microscope Lifetime bulb M5P-EPIL-485N Epi Lumin Fluorescence Module for Mi5 Microscope Bulb never needs alignment OLY-EPIL-485N Epi Lumin Fluorescence Module for Olympus CX Microscope NKN-EPIL-485N Epi Lumin Fluorescence Module for Nikon Microscope Safe illumination—no harmful UV emissions No darkroom required Crystal-clear optics surpass expensive alternatives Works with many existing infinity microscopes Illumination LED long-life light source provides extremely bright, reliable fluorescence Excitation cube: FITC standard (other cubes available upon request) Excitation: 485 nm Emission: 510 nm Contact Us 2251 Consulate Drive. Orlando, Florida. FL 32837-8363. United States Ph: +1 (407) 648-5010 Fax:+1 (407) 999-0068 / +1 (407) 426-7114 Email: info@interbiolab.com
© Copyright 2024