1. No category

GeoSnap
Triggering options you have always
wanted
Pro
Camera Add-ons
for Aerial Mapping
The GeoSnap Pro is equipped with a variety of intelligent triggering options to best match your mission
objectives, including distance-based, external input
signal, time-based, and fast-as-possible triggering.
Effortlessly acquire image-associated
position and attitude data
The GeoSnap Pro detects image capture events and
isolates the position and attitude of the camera at
these precise moments, generating an easy-to-read
text file containing image-associated position/attitude
data.
Make critical decisions immediately
after your flight
Use the GeoSnap Pro data logs in conjunction with
Field of View’s Geotility software to quickly show the
overlap, coverage, and content of your images in a
geographic context.
fieldofviewllc.com info@fieldofviewllc.com 701.203.3757
GeoSnap Pro Technical Specifications
VN-200 Accuracy & Specs
GeoSnap Pro
for Tetracam ADC
for DLSR/MILC
for Flir Tau 2
Input Voltage
9-15 VDC
5-28 VDC
Current Draw
0.35 A
80 g
Weight
Pre-Integrated Payload Options
Dynamic Pitch/Roll
0.1° RMS
5 VDC
Dynamic Heading
0.3° RMS
0.10 A
0.65 A
Horizontal Position
2.0 m RMS
100 g
110 g
Vertical Position
2.5 m RMS
Output Rate
(Ask about compatibility with other cameras)
50 Hz
*Values from manufacturer spec sheet
Tetracam Multispectral Cameras DSLR/MILC Cameras (standard or converted) Flir Tau 2 Thermal Cameras
ADC Snap, 1.3MP
Payload weight: 175g
Fujifilm X-A1, 16.3MP
Payload weight: 520g
Canon 6D, 20.2MP
Payload weight: 1475g
Log File Data
• Image name
• Date & GPS time
• Latitude
• Longitude
• Altitude
• Roll
• Pitch
• Yaw
• GeoSnap time on
• Attitude uncertainty
• Position uncertainty
• VN-200 INS status
Flir Tau 2
Payload weight: 185g
External Triggering
ADC Snap+Phantom Kit
Payload weight: 215g
Visit fieldofviewllc.com for more info
Email: info@fieldofviewllc.com
Phone: 701.203.3757
Nikon D810, 36.3MP
Payload weight: 1580g
Dimensions in
millimeters
Sony NEX-7, 24.3MP
Payload weight: 490g
Optionally trigger using an
autopilot or other input by
driving the Trigger Input to
3.3-5V or 0-0.2V. Recommended that the GeoSnap
Trigger Power be used to
provide the trigger voltage
by shorting the wires
together/using a relay.
MicroSD card
Control button
*pigtail wires provided
Dimensions in millimeters