Download Report

Electric Pontoon Legs
This innovative lifting system enables pontoon boats to literally stand on their own four feet using nothing more than the power from a 12 volt battery. Whenever you
pull into shore, on any type of bottom, you can raise your boat clear of the water in seconds with the touch of a button. Like conventional Hewitt Lifts, this made-to-go
system helps protect your pontoon from the damaging effects of waves and water for longer service life and higher resale value.
Hewitt Electric Pontoon Legs are constructed from high-grade structural aluminum and solidly bolted to the frame members of your
pontoon boat. The complete system adds only 385 lbs and has a load capacity of 6000 lbs. Maximum lift height is typically
5-1/2’ from the bottom of the legs to top of the boat deck or 3-1/2’ to the bottom of the pontoons.
Standard Features
• All-electronic lifting mechanism. A powerful 12 volt DC motor coupled to an acme screw and nut is used to drive each heavy-duty
frame leg module. This design provides a positive self-locking lift at any height.
• 4-way and independent position control. Allows quick extension and retraction of all four legs plus individual adjustment of any leg to
easily level your boat.
• Low profile design. Legs extend less than 6-1/2” below deck in their stowed position. Will not interfere with trailering or normal operation.
• Large 11-1/2” x 22-1/2” tubular feet evenly distribute weight over a large area for solid footing on hard or soft bottoms. Feet pivot
independently for added stability on rocky or uneven terrain.
Electronic Control Module
The command center is fully sealed for protection against water and vibration. It’s designed to mount directly above the transom to simplify installation and
conserve valuable storage space.
Compatible with any style of pontoon trailer
Independent leg height adjustment and pivoting feet
 Onboard Pendant Control
The four leg modules can be operated in unison with the push of
a single button or independently controlled with separate buttons
for leveling your boat on uneven bottoms.
Wireless Remote Control 
Works with most makes and models
Hewitt Electric Pontoon Legs can be installed on virtually any twin tube pontoon boat
and most tri-toon models with at least 12” of space between the pontoons.
A waterproof, key fob style control is
included with every system. Raise and
lower your boat from the convenience
of your dock or shore.
Quietly raise and lower pontoon legs with a touch of a button
Hydraulic Pontoon Legs
Hewitt Hydraulic Pontoon Legs are available in three models to best match the size, style and operating conditions of your pontoon boat. Like the Hewitt electric system,
these models help preserve the appearance and value of your pontoon, eliminate the need to tie off your boat and free up space at your dock. Enjoy the convenience of
push-button operation and the flexibility of a built-in lift that travels with your pontoon.
 Pendant
Built to last longer and stand taller
Hydraulic cylinders are the muscles of any fluid power system. Hewitt Hydraulic Pontoon Legs use 2” cylinders
which are 20% stronger than those of competitors. The rest of the supporting structure, including mounting brackets, legs and feet, are made from structural aluminum which offers a high strength-to-weight ratio and natural
corrosion resistance. Hewitt Hydraulic Legs are also well suited to deeper water applications. At maximum leg
extension, the top of the boat’s deck is approximately 6’ above the bottom of the supporting feet.
Designed to work with your boat
There is a Hewitt Hydraulic model for virtually every pontoon boat. Leg assemblies are solidly bolted to the existing
frame members of your pontoon boat and will not interfere with trailering or normal operation. In the retracted
position, legs extend less than 6-1/2” below the deck. Boats can be transported with scissor or bunk style trailers. The Standard model only adds 375 lbs to your boat and has a load capacity of 4000 lbs. Straight Leg and
Wide-Base models have a 6000 lb capacity and weigh 425 lbs.
Hewitt Hydraulic Legs are operated with a user-friendly four
switch control. Front and rear legs can be raised or lowered
independently. “LifTrack,” a unique LED arc-of-travel indicator,
shows the exact position of the legs during extension and
retraction. The pendant is compact and durable.
Wireless Remote Control 
A waterproof, key fob style control is included with every
system. Raise and lower your boat from the convenience
of your dock or shore.
Standard Features
• Wireless remote control and hard-wired onboard control with LifTrack.
• 32” long self-adjusting feet. Feet pivot independently of the legs to compensate for uneven terrain. The large
tubular design evenly distributes the pontoon’s weight for excellent stability, even on soft bottoms.
Leg assemblies
in stowed position
2” Cylinders are
20% stronger than
competitors
• 12 volt DC powered hydraulic pumps.
• Environmentally friendly, biodegradeable hydraulic fluid. Will not harm lakes or wildlife if spilled.
Single hydraulic pumps for
Standard Hydraulic Legs
Dual synchronized hydraulic pumps for
Straight Leg and Wide-Base Legs
Standard Hydraulic Legs
Hydraulic Straight Legs
Hydraulic Wide-Base Legs
The standard model is an economical choice for smaller
boats with twin pontoons. The front and rear sets of legs
are tied together and operate in tandem. Each set of legs is
powered by a separate hydraulic pump and can be raised
or lowered independently to level your boat. Leg assemblies
are constructed from rugged 4” square tubing.
This model can be used with either twin or triple pontoon boats
and uses heavy-duty 6” diameter aluminum tubing for superior
strength and greater load carrying capacity. This model features
dual synchronized hydraulic pumps front and rear. Each leg
is connected to its own pump, providing faster extension and
retraction. Front and rear legs can be operated separately to
level your boat.
Wide-Base and Straight Leg models are identical with one
exception. Specially designed angled mounting brackets
give these legs the widest base of any onboard lift available
today —72”! That’s 24” wider than the nearest competition. This extra width and stability is ideal for twin or triple
pontoon boat owners who live or travel in areas of strong
winds and rough water.
An onboard lift for virtually any pontoon boat – twin-toon, tri-toon, 18 to 28 ft.
Canopies
Functionality and great appearance. Hewitt Pontoon Legs protect your boat from the bottom up.
Our free-standing canopies protect it from the top down. All-aluminum frames and a great choice
of colors.
A free-standing canopy system to protect your Pontoon Legs equipped pontoon
Exposure to sun, wind and driving rain can ruin your pontoon from the inside out. Cracking, fading and peeling not only
takes away from the look, comfort and function of your pontoon, it reduces the value. Hewitt custom-designed canopies
provide years of beautiful, maintenance-free protection. Canopies are available in 120” or 138” widths and a wide variety
of lengths. Choose from three styles: standard, tower or peak roof frame with vinyl or SeaMark fabric covering.
Features
• Free-standing frame made from large, 3” square aluminum tubing. Cross braced design allows the entire canopy and frame to be moved in one piece if needed. Screw-in anchoring posts included.
• Canopy frame top with cross bows positioned every two feet.
• Quick-release center support straps keep cover from billowing in the wind.
• Tension cords keep covering taut and simplify installation and removal.
• Heat-welded seams prevent thread rot and water infiltration.
Have a special
canopy need? Just
contact your dealer.
• Canopy length can be extended at any time for little additional cost.
Screw-in Anchor
• Four canopy extensions allow easy adjustment for different boat heights.
Tension Cords
Standard Vinyl Canopy Colors
SeaMark Standard Colors
Our 16 oz nylon reinforced vinyl canopies are UV resistant to prevent premature fading.
Choose from 7 popular colors.
This 16 oz marine fabric is made from combining Sunbrella fabric with a textured marine grade vinyl. SeaMark
fabric has a fluorocarbon finish which makes it UV, water, mildew and fade resistant. Choose from 7 popular colors.
Grey
Beige
Blue
Green
Yellow
Teal
White
Black
Burgundy
Cadet
Navy
Forest
LinenTweed
Pacific
Accessories
Hewitt offers an extensive line of accessories designed to aid installation, simplify use and provide additional
protection for your boat. Accessories are also available to satisfy the specific needs of certain types of craft and
varying lake or river conditions.
Standard Canopy
This economical design offers rounded sides and end caps for
a smooth wrap appearance with no hard edges.
Canopy Bracing
Recommended on 29 ft
canopies and longer.
Catwalk Brackets
Peak Roof Canopy
The steep pitch of a Peak Roof Canopy rapidly sheds water.
Its higher profile and clean lines accentuate the color of your
canopy.
All aluminum brackets with
mounting hardware to make
side mounted catwalk for
your free standing canopy.
(Planks not included)
Under-Canopy Storage Net
Make the most of available space. This convenient storage
net easily attaches to the canopy frame, providing quick
access to supplies and recreational gear. Weight capacity
approximately 75 lbs.
Wheel Kit
Mounts on center of free
standing canopy. Works
great for maneuvering
around objects or over sea
walls.
Post Ratchet
Tower Canopy
The arched canopy provides greater vertical clearance, allowing
boat towers and bimini tops to remain in the upright position
for storage.
Provides leverage to
easily install and remove
screw-in anchors.
36” Plastic Bumper
Durable plastic bumper
with recessed holes,
mounts to uprights.
Lift Jack
Use to raise one end of
the canopy to install or
remove wheels.
Specifications
Model
Height With
Legs Retracted
Capacity
Recommended Boat Lengths
Weight
Min. Width Between Pontoons
For Triple Toon Installation
Min. Width Between
Pontoons For Twin Tubes
Total Lift Height From
Bottom To Deck Top
Max. Transom Length From First Full
Cross Member On Rear Of Boat
Electric
6-1/2”
6000 lbs
19’ to 26’
385
12”
-
66”
-
Standard
5-1/2”
4000 lbs
18’ to 22’
375
N/A
48-1/2”
72”
61”
Straight
6-1/2”
6000 lbs
18’ to 28’
425
8-1/2”
-
72”
-
Wide Base
6-1/2”
6000 lbs
18’ to 28’
425
10-1/2”
-
72”
-
We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 35 years, boat and
watercraft owners have trusted the safety and longevity of their investments to Hewitt Lifts, docks, and canopies.
LIMITED WARRANTY
New HEWITT-built pontoon legs carry a 2 year conditional warranty on all aluminum and aluminum welds. New Hewitt built free-standing canopies and accessories carry a 15 year conditional warranty on all aluminum and aluminum welds. A 5 year conditional warranty on vinyl and SeaMark
canvases, excluding fading.
HEWITT Machine and Manufacturing, Inc. further warrants all other parts used on HEWITT-built lifts and accessories, purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding
components and options which carry their own manufacturer’s warranty, wherein that warranty will apply.) Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR
PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.
No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.
In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing,
Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one
month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.
The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated
costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the
claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and
Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing,
Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.
Unless otherwise noted this warranty agreement is the only warranty agreement between the parties. This agreement states the limits and association of risk between the two parties. Customer acknowledges understanding of this warranty and agreement and binding to the terms contained
within.
OTHER MANUFACTURER’S WARRANTIES
Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties
are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by
other manufacturers: Hydraulic pumps and hoses carry a manufacturer’s 2 year warranty. Hydraulic cylinders carry a manufacturer’s 1 year warranty. Electrical parts carry a manufacturer’s 1 year warranty.
Specifications are subject to change without notice. Installation of pontoon legs may require minor modifications to your boat.
Protected by one or more of the following U.S. Patents: 6,907,835; 6,983,707; 7,051,665; 12,407,096; 61,037,711; 61,037,712. Other patents pending.
Pontoon Legs is a registered trademark and LifTrack is a trademark of Hewitt Machine and Manufacturing, Inc.
HEWITT MACHINE AND MANUFACTURING INC.
709 Hwy 14 West, Nicollet, MN 56074
Weekdays, 8:00 am to 4:30 pm CST
Ph: 507.225.3421 or 800.544.2067
www.hewitt-roll-a-dock.com
www.pontoonlegs.com
Fax: 507.225.3053
Email: info@hewitt-roll-a-dock.com
PRINTED IN THE USA