PROCRAFT SYNTHETIC LIFTING SLINGS INDUSTRIES LTD. www.wescovan.com

INDUSTRIES LTD.
www.wescovan.com
PROCRAFT SYNTHETIC
LIFTING SLINGS
Head Office: Unit 1, 9663-199A Street Langley BC V1M 2X7
Phone: 604 881 3000
Fax: 604 881 3010
Email: info@wescovan.com
Rigging Centre: 2437 Beta Avenue Burnaby BC V5C 5N1
Phone: 604 292 1220
Fax: 604 292 1222
Email: burnaby@wescovan.com
PROCRAFT
WEB SLINGS
INTRODUCTION
Procraft synthetic webbing slings are generally manufactured from
Nylon, but can also be manufactured from Polyester. The light weight
of the material, combined with superior flexibility have made these
slings popular with riggers over the years. Webbing slings will not
scratch or deface loads and the webbing’s flexibility will form a secure
grip around the load to be lifted.
Slings manufactured from Nylon will stretch between 6% to 8% and
should be used if alkalis are present, while Polyester slings will stretch
approxiametly 3% and should be used where acids exist.
Synthetic webbing used to manufacture slings have a chemically
treated surface to increase abrasion resistance, seal out moisture, and
prevent grit from attacking the webbing internally. The webbing is
unaffected by moisture, mildew, rot and certain chemicals.
SLING MANUFACTURE
Procraft web slings are manufactured to strict quality standards, and
our constant in house testing and quality analysis of all materials and
fabrication procedures ensure users a superior product. Slings can be
manufactured in either single or multiple plies, and may include
accessories such as wear pads, sleeves and end fittings. Several
types and configurations are available. The following system is used
to identify different types at time of order:
Sling Type (2 letters)
EE - Eye each end
EN - Endless
TC - Triangle & Choker
TT - Triangle each end
ER - Reverse eye each
end
Indicates the
number of plies in
sling. (1,2,3 or 4)
Webbing material
capacity.
Webbing width in
inches (1 to 12).
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 2
TYPE 1: Triangle & Choker (TC) hardware on each end manufactured
from either steel or lightweight aluminum. Most effective for choker
hitch, can also be used in vertical or basket hitches.
TYPE 2: Triangle & Triangle (TT) hardware on each end manufactured
from either steel or lightweight aluminum. For use in either basket or
vertical hitches only.
TYPE 3: Flat Eye & Eye (EE) sewn on each end. Choice of either
straight (easy to remove from underneath loads) or tapered eyes. For
use in vertical, choker or basket hitches.
TYPE 4: Twisted Eye & Eye (EE) sewn on each end. Eyes are turned at
a right angle to sling body and choice of either straight or tapered
eyes. Forms effective choker hitches, also used in vertical or basket
hitches.
TYPE 5: Endless Grommet slings (EN) sewn together to form an
endless loop. Versatile sling for all hitches.
Other Fittings: Slings can be manufactured with other steel fittings including Connectors,
Shackles, Hooks and Couplers. Also available wear pads and protection sliding sleeves.
Please contact Wesco Industries for further information on these products.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 3
ENVIRONMENTAL
CONSIDERATIONS
All slings should be stored in a cool, dry, and dark place away from
harmful ultra-violet rays (sunlight) and Arc Welders in operation.
Continuous exposure to sunlight can affect the strength of synthetic
webbing in varying degrees, ranging from total degradation to slight
degradation. Nylon and Polyester slings shall not be used with
temperatures in excess of 194 degree F (90 degrees C).
Chemical active environments can be hazardous to the sling strength,
Wesco Industries should be consulted before using slings in such
environments. See chart below for a guide on chemical resistance of
webbing:
NYLON
NO
YES
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
POLYESTER
#
YES
NO
##
YES
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
#Disintegrated by concentrated sulfuric acid.
## Degraded by strong alkalis at elevated temperatures.
CARE, USE & INSPECTION
Webbing slings should be inspected by the person(s) prior to any
lifting operations. The inspector should seek to detect any surface
damage to the sling and its components. Excessive surface chafe
(wear), cross or longitudinal cuts in the webbing, cuts or chafe damage
to the edges (caused by overloading), crystaliztion of the webbing
(caused by exposure to excessive heat), local weakening or softening
of the webbing material so that surface fibres can be plucked or rubbed
off, corrosion and/or distortion of hardware - caused by acids or
overload; will result in a serious loss of strength to the sling. A sling so
affected should be taken out of service immediately.
Never try to repair a damaged webbing sling. Wesco Industries can
inspect and reuse your old webbing sling hardware safely and provide
proof load certification if required.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 4
Once sling has been inspected, determine the weight of the load, type
of load to be lifted and the sling angle that is to be used. Make sure that
the sling will be protected from cuts by sharp edges, sharp corners and
abrasive surfaces.
NEVER EXCEED THE WORKING LOAD LIMIT OF THE SLING!
SLING ANGLES
When slings are used in a basket hitch and suspended from one hook
sling angles will directly affect the rated capacity of any slings. The
“sling to load angle” is the angle between the horizontal top of the load
and the leg of the sling. As the “sling to load angle”decrease, so does
the safe capacity of the sling. Refer to the charts below:
Sling Angles
in Degrees
Factor
Sling Angles
in Degrees
Factor
15
0.259
55
0.819
20
0.342
60
0.866
25
0.423
65
0.906
30
0.500
70
0.940
35
0.574
75
0.966
40
0.643
80
0.985
45
0.707
85
0.996
50
0.766
90
1.000
Angles less than 45 degrees are not reccomended and those below
30 degrees should be avoided whenever possible.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 5
HITCH TYPES
Vertical Hitch
Choker Hitch
Basket Hitch
WORKING LOAD LIMIT CHARTS
TYPE 1
Triangle &
Choker
SINGLE PLY
Width
Vertical (lbs)
Choker (lbs)
Basket (lbs)
2
3,200
2,400
6,400
3
4,800
3,600
9,600
4
6,400
4,800
12,800
5
8,000
6,000
16,000
6
9,600
7,200
19,200
8
12,800
9,600
25,600
10
16,000
12,000
32,000
12
19,200
14,400
38,400
DOUBLE PLY
2
6,000
4,800
12,000
3
8,800
7,040
17,600
4
11,000
8,800
22,000
5
13,700
10,960
27,400
6
16,500
13,200
33,000
8
20,000
15,000
40,000
10
24,000
18,000
48,000
12
28,800
21,600
57,600
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 6
TYPE 2
Triangle &
Triangle
SINGLE PLY
Width
Vertical (lbs)
Choker (lbs)
Basket (lbs)
2
3,200
N/A
6,400
3
4,800
N/A
9,600
4
6,400
N/A
12,800
5
8,000
N/A
16,000
6
9,600
N/A
19,200
8
12,800
N/A
25,600
10
16,000
N/A
32,000
12
19,200
N/A
38,400
DOUBLE PLY
TYPE 3 & 4
Eye & Eye
2
6,000
N/A
12,000
3
8,800
N/A
17,600
4
11,000
N/A
22,000
5
13,700
N/A
27,400
6
16,500
N/A
33,000
8
20,000
N/A
40,000
10
24,000
N/A
48,000
12
28,800
N/A
57,600
SINGLE PLY
Width
Vertical (lbs)
Choker (lbs)
Basket (lbs)
1
1,600
1,200
3,200
2
3,200
2,400
6,400
3
4,800
3,600
9,600
4
6,400
4,800
12,800
5
8,000
6,000
16,000
6
9,600
7,200
19,200
8
12,800
9,600
25,600
10
16,000
12,000
32,000
12
19,200
14,400
38,400
1
3,100
2,480
6,200
2
6,000
4,800
12,000
3
8,800
7,040
17,600
4
11,000
8,800
22,000
5
13,700
10,960
27,400
6
16,500
13,200
33,000
8
20,000
15,000
40,000
10
24,000
18,000
48,000
12
28,800
21,600
57,600
DOUBLE PLY
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 7
SINGLE PLY
TYPE 5
Endless
Width
Vertical (lbs)
Choker (lbs)
Basket (lbs)
1
3,200
2,400
6,400
2
6,200
4,650
12,400
3
9,400
7,050
18,800
4
12,400
9,300
24,800
5
15,600
11,700
31,200
6
18,600
13,950
37,200
8
21,000
15,750
42,000
10
26,000
19,500
52,000
12
31,000
23,250
62,000
DOUBLE PLY
1
6,200
4,650
12,400
2
12,000
9,000
24,000
3
17,600
13,200
35,200
4
22,000
16,500
44,000
5
27,400
20,550
54,800
6
33,000
24,750
66,000
8
34,000
25,500
68,000
10
38,000
28,500
76,000
12
43,750
32,800
87,500
Every Procraft Sling bears an identification tag which is permanently
marked with Working Load Limit, Description and Length. Slings
should never be used beyond the Working Load Limit marked on these
tags.
SPECIALTY PRODUCTS
Wide Lift (Cargo), Return Eye (Reverse Eye), Marine Boat Lift and Stone
Handling Slings are manufactured to order. Contact Wesco Industries
for advise on suitability for applications and designated Working Load
Limits for these type of slings.
Procraft Slings can be treated with a number of coatings which meet
the specific demands made by industry. Treatments can include a
Latex coating which helps extend sling life, increases the stiffness of
slings and reduces the amount of stretch. Coatings will not affect the
slings Working Load Limit.
Wesco Industries also manufacture webbing nets for use as cargo
lifting nets, fall protection nets and debris protection nets.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 8
POLYESTER
ENDLESS SLINGS
INTRODUCTION
Wesco Industries endless synthetic slings are manufactured from a
continuous loop of polyester yarn covered by a single herringbone
weave jacket. The jacket is colour coded and protects the inner core of
load bearing polyester yarns from damage and UV rays.
Endless slings have many advantages including:
• Low stretch (about 3% at rated capacity).
• Excellent contact and conforms to shape of your load to grip
securely.
• Cover will not scratch or damage your load surface.
• Light weight.
• Excellent for use in choke hitch applications as sling releases
easily after use.
WORKING LOAD LIMIT CHARTS
Polyester
Round Sling
Endless
Colour
Vertical (lbs)
Choker (lbs)
Basket (lbs)
Purple
2,650
2,120
5,300
Black
5,300
4,240
10,600
Yellow
8,400
6,720
16,800
Tan
10,600
8,500
21,200
Red
13,200
10,560
26,400
Orange
16,800
13,440
33,600
Blue
21,200
17,000
42,400
Gray
31,700
25,300
63,400
Brown
52,900
42,300
105,800
Olive
66,100
52,880
132,200
• Steel hardware fittings and protective sleeves are
available for endless slings.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 9
POLYESTER
TIE DOWN ASSEMBLIES
INTRODUCTION
Wesco Industries manufacture a complete range of truck tie down
assemblies and associated products from 1 inch to 4 inch wide
webbing. Every assembly is manufactured to strict quality standards
and use only the best hardware available.
With our in house manufacturing facilities we can produce any custom
length or hardware configuration required. All tie down assemblies are
rated for lashing capacities only and should not be used for lifting
purposes.
When ordering tie down assemblies the following information is
required:
• Webbing width (1”, 2”, 3” or 4” Wide).
• Type: Ratchet (Short or long handle), Cam Buckle or Winch Strap
only.
• Length of strap.
• Hardware required: Wire Hooks (3/8” or 1/2”), S Hooks, Flat Hooks
or Dee Rings.
• Colour of webbing material (if important).
HARDWARE
Ratchet Buckles
Short Handle
Long Handle
Over Centre Buckle
Cam Buckle
End Fittings
3/8” Wire Hook
1/2” Wire Hook
Delta Ring
S Hook
Flat Hook
Snap Hook
E Track Fitting
F Track Fitting
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 10
RATCHET TIE DOWNS
1” Wide
This size is commonly used for small utility or van tie downs. Standard
assemblies come complete with 9” fixed end and 16 feet strap.
1” Ratchet Tie Down with Wire Hooks
Breaking Strength 2,500lbs.
Rated Capacity 835lbs.
1” Ratchet Tie Down with 'S' Hooks
Breaking Strength 1,200lbs.
Rated Capacity 400lbs.
2” Wide
This size is the most commonly used tie down and is suitable for a
wide range of applications including flat bed trucks and van tie downs .
Standard assemblies come complete with 18” fixed end and 25 feet
strap.
2” Ratchet Tie Down with 3/8” Wire Hooks
Breaking Strength 5,000lbs.
Rated Capacity 1,670lbs.
2” Ratchet Tie Down with 1/2” Wire Hooks
Breaking Strength 10,000lbs.
Rated Capacity 3,335lbs.
2” Ratchet Tie Down with Flat Hooks
Breaking Strength 10,000lbs.
Rated Capacity 3,335lbs.
2” Ratchet Tie Down with Dee Fittings
Breaking Strength 10,000lbs.
Rated Capacity 3,335lbs.
2” Ratchet Tie Down with E Track Fittings
Breaking Strength 3,000lbs.
Rated Capacity 1,000lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 11
3” & 4” Wide
This size is commonly used on flat bed trucks. Standard assemblies
come complete with 18” fixed end and 30 feet strap.
Ratchet Tie Down with Wire Hook
4” Wide: Breaking Strength 20,000lbs, Rated Capacity 6,660lbs
Ratchet Tie Down with Dee Fittings
3” Wide: Breaking Strength 16,200lbs, Rated Capacity 5,400lbs.
4” Wide: Breaking Strength 20,000 lbs, Rated Capacity 6,660lbs.
Ratchet Tie Down with Flat Hook
3” Wide: Breaking Strength 16,200lbs, Rated Capacity 5,400lbs.
4” Wide: Breaking Strength 16,200 lbs, Rated Capacity 5,400lbs.
RATCHET LOOP ASSEMBLIES
Ratchet Loops are manufactured using a ratchet with a continuous
length of webbing attached. Commonly used for bundling, stage
rigging and tie down. Ratchet loop assemblies are manufactured in 1”,
2”, 3” and 4” wide webbing. Please specify length of webbing, width
and ratchet handle type (short or long).
•
•
•
•
1” Wide: Breaking Strength 2,500lbs.
2” Wide: Breaking Strength 10,000lbs.
3” Wide: Breaking Strength 16,200lbs.
4” Wide: Breaking Strength 20,000lbs.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 12
CAM BUCKLE & OVER CENTRE
Cam buckle & over centre tie downs are manufactured to order. They
are available in 1” and 2” wide webbing. Assemblies would be
manufactured with a 12” fixed end. Specifications required at time of
order are as follows:
•
•
•
•
Webbing Width (1” or 2”).
Buckle type (Cam or Over Centre).
Hardware required (Hooks, Ring or E Track).
Strap Length.
STRAP ONLY
Tie down straps can be manufactured in any configuration of width,
length and hardware fittings. The straps that are stocked are
generally suitable for truck winches and have a hook or fitting sewn
on one end only.
Stocked items include straps in 4” wide webbing x 30 feet with either
a Dee Ring Fitting or Flat Hook and are available in an array of
colours. Also stocked are 2” wide webbing straps x 25 feet with
either a Wire Hook, Dee Ring or Flat Hook.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 13
TOW TRUCK ASSEMBLIES
Wesco Industries manufacture a range of products suitable for the Tow
Truck industries. Products include Wheel Lift Straps, Ratchet Loop
Assemblies, Transport Bridle Assemblies and Wheel Tie Down Straps.
Webbing straps can inlcude towing hooks and cluster assemblies
where required. Information required at time of order includes:
•
•
•
•
•
Assembly type or application.
Webbing Width (Standard is 2”).
Hardware if required (”J” Hooks, “T” Hook, “R” Hook, Clusters).
Strap Length.
Is a Ratchet Required.
OFF ROAD RECOVERY STRAPS
Wesco Industries produce a range of off road accessories for use with
recreational vehicles.
Snatch straps can be used to retrieve vehicles from a trapped situation
(mud and sand). Standard length 27 feet.
Winch extension straps are light weight (compared to chains) but
extremely strong and suitable in most applications. Standard Length
30 feet, 60 feet or 90 feet.
Tree trunk protectors are designed to protect trees from the cutting
action of winch cables, the strap is simply placed around the trunk and
secured with an anchor shackle. Standard length 10 feet.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 14
BULK WEBBING & ACCESSORIES
Webbing is available in a range of sizes, colours and lengths. Webbing
suitable for lifting is available in blue or yellow and range in width from
1” to 12”. Webbing suitable for tie down are available in yellow or black
and range in width from 1” to 4”. Full coils are generally 50 metres or
100 metres but can be cut to length as required.
All hardware is available as separate items including ratchets, cam
buckles and hooks.
WEBBING NETS
Wesco Industries manufacture a large variety of nets suitable for most
applications. Uses can include:
•
•
•
•
Ship gangway nets.
Cargo nets.
Debris fall protection nets.
Ship safety perimeter net.
Information required at time of order includes:
•
•
•
•
•
•
Applications of net (Lifting, Safety etc.)
Working Load Limit.
Webbing Material (Nylon or Polyester).
Net Size.
Lifting eyes in all corners.
Mesh size.
All webbing nets are manufactured to customer orders. Some
consultation between Wesco Industries and the client would be
required to meet the exact requirements of our customers.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Industries Ltd.
WARNING: NEVER EXCEED WORKING LOAD LIMITS
PAGE 15
INDUSTRIES LTD.
www.wescovan.com
Head Office: Unit 1, 9663-199A Street
Langley BC V1M 2X7
Phone:
604 881 3000
Fax:
604 881 3010
Email:
info@wescovan.com
Rigging Centre: 2437 Beta Avenue
Burnaby BC V5C 5N1
Phone:
604 292 1220
Fax:
604 292 1222
Email:
burnaby@wescovan.com
Distributors of:
Wire Rope & Fittings - Powerstrand, Esco, Crosby, Campbell.
Wire Rope all types of constructions and diameters, Wire
Rope Fittings, Wire Rope Assemblies, Grips, Hooks, & Links.
Slings - Powerstrand, Gunnebo, Campbell, Procraft.
Wire Rope, Chain, Webbing, Endless Polyester & Rope.
Chain & Fittings - Campbell, Gunnebo - Grabiq, Procraft.
Grade 30, Mooring & Lashing, Grade 70, 80 & 100.
Hoists & Trolleys - Columbus Mckinnon, Coffing & Campbell.
Chain Hoists, Lever Hoists, Cummalongs, Electric Hoists, Air
Hoists, Winches, Beam Clamps & Trolleys.
Lifting Equipment- CM, Merrill, Terrier, Johnson, Rud, Crosby.
Shackles, Hooks, Plate Clamps, Crane Blocks, Eyebolts,
Turnbuckles.
Cordage - Novatec Braid, Samson, Procraft.
Double Braid, 12 Strand, 8 Strand, 3 Strand & Cords.
Towing & Tie Down - Procraft, CM, Crosby.
Loadbinders, Straps, Chain & Hooks, & Wire Rope
Assemblies.
Industries Supplied:
Crane, Construction, Logging, Marine, Industrial, Towing,
Entertainment, Elevator, Mining, Offshore Oil & Gas, Fishing,
Forestry, Utilities, Steel Works & Rigging.
© Copyright Wesco Industries Ltd 2004
January 2004