LOT NUMBER: DATE PURCHASED: / / Kensington Bar Stool Model # WMC309-21 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 1-866-942-5362 Pacific Standard Time: 8:30 a.m. - 4:30 p.m. Monday to Friday or visit our web site 24 hours a day, 7 days a week for product assistance at www.whalenstyle.com or e-mail your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Mfg. Inc. Page 1 Factory No. 75-14697 Model # WMC309-21 QUALITY GUARANTEE We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. Customer Service: 1-866-942-5362 8:30 a.m. - 4:30 p.m. PST, Monday to Friday www.whalenstyle.com MAXIMUM RECOMMENDED WEIGHT LOADS 1. Maximum load weight is 300 pounds. This unit is intended for use only with the maximum weights indicated. Use with loads heavier than the maximum weights indicated may result in instability causing possible injury. GENERAL INFORMATION, TIPS & TRICKS 1. Please read the Assembly Instructions prior to assembling the unit. 2. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface. 3. Keep all hardware and part out of reach of children. 4. Please wait until all steps are completed before fully tightening bolts. 5. Make sure all bolts and screws are tightly fastened before the unit is used. Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Page 2 Factory No. 75-14697 Model # WMC309-21 Parts and Hardware List Please read completely through the instructions and verify that all listed parts are present before beginning assembly. A- Seat Cushion (1) B- Seat Frame (1) C- Footrest (1) D- Leg (4) (1)- M6 x 25 mm Bolt (4+1 extra) (4)- Flat Washer (8+1 extra) (2)- M6 x 30 mm Bolt (4+1 extra) (5)- M4 x 38 mm Wood Screw (4+1 extra) (3)- Lock Washer (8+1 extra) Allen Wrench (1) Tools required: Allen Wrench (provided), Phillips screwdriver (not provided). Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Page 3 Factory No. 75-14697 Model # WMC309-21 Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts listed. 2. Attach the 4 Legs (D) to the bottom cutout of Footrest (C) as shown in detail #1. Make sure the predrilled holes on Footrest align with the threaded inserts included in the Legs respectively. Parts Required C – Footrest D – Leg Qty. (1) (4) Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Page 4 Tools Required No tool required Factory No. 75-14697 Model # WMC309-21 Assembly Instructions 3. Pick up Seat Frame (B) and slot to the Leg (D), secure in place by inserting and screwing the M6 x 30 mm Bolt (2) through Lock Washer and Flat Washer (3 and 4) into the pre-drilled hole on top of the Leg. Tighten the bolt with the Allen Wrench provided. See detail #2. 4. Repeat last step to the other 3 Legs (D). M6 x 30 mm Bolt (4 used in this step) ② Lock Washer (4 used in this step) ③ Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Page 5 Flat Washer (4 used in this step) ④ Factory No. 75-14697 Model # WMC309-21 Assembly Instructions 5. Turn the Seat Cushion (A) upside down on a flat and soft surface to prevent scratches. 6. Now center and secure the Seat Cushion (A) onto the Seat Frame (B) with four M4 x 38 mm Wood Screws (5) into the pre-drilled holes on the Seat Frame. See detail #3. 7. Secure the Footrest (C) to the Legs (D) using four M6 x 25 mm Bolts (1) through Lock Washer and Flat Washer (3 and 4) through the pre-drilled holes into the Legs. Tighten the bolts with the Allen Wrench provided. See detail #3. Never use the long bolt in the leg and footrest joint- will damage your stool! 8. Stand the unit upright. M6 x 25 mm Bolt (4 used in this step) ① Lock Washer (4 used in this step) Flat Washer (4 used in this step) ③ ④ M4 x 38 mm Wood Screw (4 used in this step) ⑤ Your assembly should now be complete. Thank you for your purchase. Please call for replacement parts or assistance: 1-866-942-5362 Whalen Furniture Mfg. Inc. Page 6 Factory No. 75-14697 *WMC309-21-1-SC *WMC309-21-2-SF *WMC309-21-3-L *WMC309-21-4-F *WMC309-21-5-CH *WMC309-21-6-M6x25B Seat Cushion Seat Frame Leg Footrest Complete Hardware M6 x 25mm Bolt Kensington Bar Stool *WMC309-21-7-LW *WMC309-21-8-FW *WMC309-21-9-WS *WMC309-21-10-AW *WMC309-21-11-M6x30B *WMC309-21-12-FP Lock Washer Flat Washer M4 x 38mm Wood Screw Allen Wrench M6 x 30mm Bolt Floor Protector IF YOU REQUIRED TO ORDER ANY PARTS PLEASE USE THE LIST BELOW