1. No category

ML75E16
4x2 RIGID
JCP CURTAIN SIDE BODY
Plated/Design Weight
Plated Weight
Design Weight
For front axle capacity upgrade – see Order Guide
GVW (Kg)
GTW (Kg)
Front (Kg)
Rear (Kg)
7500
7500
11000
11000
3200
3600
5200
5200
Kerb Weight
Weights are for S models to standard specifications and include curtain side body, water, oils, 5 litres of AdBlue and 20 litres of fuel but exclude driver.
Kerb weights are subject to a manufacturing tolerance of + / -5%.
Wheelbase (mm)
Front (Kg)
Rear (Kg)
Total (Kg)
Maximum Payload (Kg) @ GVW
4455
2651
1899
4550
2950
Dimensions
Wheelbase (mm)
Overall length (including body (mm))
Cab width (over wings (mm))
Cab height (unladen mm)
Front overhang (mm)
Rear overhang (mm)
Body height at centre line of axle (mm)
4455
7977
2200
2545
1272
2250
3560
Body height at end of frame (mm)
C/line f/axle to back of cab equip (mm)
Turning circle (wall to wall (mm))
3614
475
16,500
Tyres and Wheels
Standard
Tyre Size
Front
205/75R17.5
Rear
205/75R17.5
Tread
Front
On Road
Wheels (6 stud)
Front
Rear
6.00 x 17.5
6.00 x 17.5
Rear
On Road
Body Specification
Exterior
Under frame galvanised steel channel runners and galvanised steel cross bearers spaced at 406mm centres, bolted Construction. Treated steel framed body designed and built for
full width and full height loading. Pre-galvanised steel pillars to both front and rear. Pre-stressed steel cant rails allow an "Openspan" design self supporting roof system. Full length
one piece GRP fiberglass roof skin. Galvanised vee rave sideraves. Curtains mid blue 2x2 weaved 900 g/m2 PVC curtains vertically tensioned by black webbing straps complete
with stainless steel locking buckles. Horizontal tensioning is achieved by treated tubular steel poles and heavy duty yellow passivated langover tensioners. Tensioned to front and
rear. 125mm deep pelmet, colour black front frame. Pre-Galvanised steel framed bulkhead complete with gloss white GRP panel. Corner pillar to be capped with a 64mm hexagonal
designed radius anodised aluminium capping. Rear frame pre-galvanised steel rear frame. No grab handles required. Rear closure 17mm GRP gloss white double rear doors c/w
external mounted lever lock and hinges to each door. High efficiency peripheral seals. Nearside door to open first. Side guards hinged galvanised steel droppers with galvanised
steel inner rail and high density polyethylene outer sleeve or aluminium to meet TUV regulations. Rear wings twin parlok black thermoplastic rear wings c/w stays. Spray suppression
not Included. Under run heavy duty galvanised steel rear under run as per C & U regulations. Side marker lights as required with current C & U regulations. Outline markers, two
outline markers to meet current C & U regulations. Conspicuity markings are not legally required.
Interior
Floor 18mm phenolic standard range @220 g/m2 (birch) with fixings at every bearer. Kick strip one row of 220mm high impact thermoplastic type to front bulkhead at floor level.
Two LED interior lights are wired and switched to the rear of the body. Recessed floor rings are optional available.
Body Dimensions
External length
Internal length
External width
Internal width
External height
Internal height
Side app height
Side app length
Cubic capacity (Approx) m3
mm
6230
6100
2440
2400
2717
2384
2289
5883
35.95
1375
Body weight Kg (engineering tolerance 5%)
(Ft in)
(20' 5'')
(20' 0")
(8' 0")
(7' 10")
(8' 11'')
(7' 9")
(7’ 6”)
(19' 4'')
The information in this literature is intended to be of a general nature only. Iveco Ltd reserves the right to modify or change specification at any time. For further information please consult your dealer.
www.iveco.co.uk
PD/AP/ 2015 ML75E16 VI Truck Driveaway JCP Curtain Side Body.xls - 28/04/2015
Page 1
ML75E16
4x2 RIGID
JCP CURTAIN SIDE BODY
Engine
Type
Operation
Number of cylinders
Bore x Stroke
Capacity
Power (PS/kW) @ rpm
Torque (Nm/lbft) @ rpm
Injection
Air filter
Compressor
Governor
Cooling fan
Exhaust
Speed limiter
Engine Immobiliser
Cruise control
Radiator guard
Tector
F4A FE411A*C Euro VI
Direct injection turbo diesel with intercooler
4 in line
104 x 132 mm
4485cc
160/118 @ 1920-2500
580/427 @ 1250-1980
Electronic - Bosch common rail
Dry, under floor intake
225cc
All speed
Viscostatic
Stainless steel. Hi-e SCR catalyst system
Driver programmable to 90kph
Standard
Standard
Optional
6.02
3.32
2.07
1.4
1
0.79
Reverse
5.58
Performance (std tyres)
with ZF 6AS700 & 6S700 gearbox
Axle ratios available
Geared speed (mph)
Gradeability % @ GVW
Gradeability % @ 11000 Kg
Rear Axle
Type
Standard ratio
Diff lock
Iveco 450617 hypoid
3.91 (ZF 6AS700 gearbox)
Optional
Construction
Dimensions
Underrun
Fuel tank
AdBlue tank
Ladder frame with pressed steel side members
and riveted and bolted cross members.
Towing eye incorporated in front bumper.
172.5 x 65 x 4 mm
Standard front and optional rear
120 litre plastic, with locking cap
30 litre plastic, with locking cap
Suspension
Type
Parabolic leaf front and rear
Leaf dimensions:
Length (mm) Width (mm)
Front
1714
70
Rear
1670
70
Rear Helper
1630
70
Shock absorbers and anti-roll bars front and rear.
Standard
6AS700
Automated
Gear ratios
1st
2nd
3rd
4th
5th
6th
Iveco 5833/1 I beam
Max 52º
Chassis
Clutch
Single dry plate with diaphragm spring.
Push type with midi servo. Hydraulic
with air assistance. Diameter: 362mm
Gearbox
Type
Operation
Front Axle
Type
Steering angle
Electrics
Type
Alternator
Starter
Batteries
3.91
69
+40
33
3.58
76
+40
30
4.3
63
+40
36
4.56
59
+40
39
Brakes
Type
Front
Rear
Surface area
ABS system
Parking
Exhaust brake
Air drier
No.
1
1
1
24v negative earth return
28V, 70A
24V, 4.0 kW
2 x 12V, 110 Ah
Electronically sensed and controlled
All circuits protected by fuses
CAN line data bus system
EBL - Vertically split air/hydraulic
330mm ventilated disc
330mm ventilated disc
480cm2
Standard Knorr Bremse ABS6
Spring parking brake on rear axle
Electrically powered (multi-function)
Standard
Optional Axle Plating
Front
3600 Kg
Rear
5200 Kg
Only in combination with appropriate tyres
Power assisted steering
Type
Steering wheel
Column
Steering column lock
Power assisted steering
470mm diameter
Adjustable by 50mm (height) and 17 deg (inclination)
Standard
Cab Equipment
Day cab Interior:
Forward control MLC day cab. Three way adjustable driver’s seat with integral head restraint and seatbelt. Dual fixed passenger seat with 50/50 split back rest and seatbelts.
Overhead lockers with doors. Windowless rear cab wall with document storage. Large storage shelf on passenger side. Four speed fan air flow up to 500m3/hr kw output.
All gauges monitored using international symbols. Automatic electronic two man digital 24hr tachograph. Speedometer with dual scale instrumentation. Left and right hand
entry assist handles. Fully adjustable steering column. Dash mounted gear selection switches for automated gearbox. Column mounted control stalks. Overhead console
for radio/CB. Courtesy and map reading lights. Engine immobiliser. Handbrake warning buzzer. Drivers seatbelt warning buzzer.
Day cab Exterior:
Suspension – rubber blocks and dampers. Hydraulic tilt to 60 degrees. Pressed steel construction with injection moulded vulnerable parts. Electric door windows and laminated
screen. Rear view mirrors to EEC 2003/97 and 2005/27, including two wide angle, one kerb view and one front view mirror.
The information in this literature is intended to be of a general nature only. Iveco Ltd reserves the right to modify or change specification at any time. For further information please consult your dealer.
www.iveco.co.uk
PD/AP/ 2015 ML75E16 VI Truck Driveaway JCP Curtain Side Body.xls - 28/04/2015
Page 2