Download Report

.
S TR
LT D
AT
T.
EDUTECH
IC
PV
G
E
RI
VE
ST
RI
VE
SE RV E
TH
ICIS
H-109, Ground Floor, Sector-63, Noida-201307, U.P INDIA
Tel.: 0120 - 4330808, Mobile : 09958196412
Website: www.icis.co.in, Email: info@icis.co.in
Industry Program in
Paint & Coating
Technology
Examination Assignments
April, 2015
INSTRUCTIONS FOR EXAMINATION ASSIGNMENTS
l
Electronic (email, fax) submission of the assignments is not acceptable.
l
The assignments have to be submitted by the student on standard A4 size
paper in eligible hand written, typed or printed format only.
l
Do not copy from the answers of other participants. If it is noticed the
assignment of such participants will not be accepted.
l
The assignment for each paper should be written separately. Do not write the
assignment for all the papers in continuity. However, all the assignments are to
be submitted together.
l
No two or more participants should submit their assignments in same
envelope.
l
The participants should mention their Name and Enrollment Number on each
page of submitted assignment copy.
l
th
The last date of submission of Assignments is 30 April, 2015.
The assignments have to be submitted to:
The Program Director
ICIS
H-109, Ground Floor, Sector-63, (Behind Haldiram) Noida-201307
U.P. INDIA
l
Participants are advised to keep a photocopy of submitted assignments.
l
The participants should mention their Name and Enrollment Number on the
envelope.
l
The participant should also mention “Examination Assignment” at the top of
the envelope.
l
The result will be announced in the 2nd week of June, 2015.
l
For any query mail us on info@icis.co.in
www.icis.co.in
2
ICIS
email: info@icis.co.in
Module No. 1: Introduction to Paints Technology
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
What do you mean by blooming? Expain
2.
Write a note hard gloss paint?
4.
Discuss the general ingredients of paint in detail ?
5.
What do you mean by deagglomeration ? Explain
6.
Explain connection between toxicity and environmental pollution.
7.
What are the major routes to obtain polyurethane coatings? Discuss
8.
Explain various testing mechanical properties of paints.
9.
Explain why do paints fail? Explain what specific test to be done to avoid
paint failure.
10. Explain “Hansen solubility parameter system.
11. Explain the different coating methods used in industry in detail.
12. Write preparation of bronze paints along with its properties.
www.icis.co.in
3
ICIS
email: info@icis.co.in
Module 2: Chemical Database Design &
Their Management
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
Explain key features of database system in detail.
2.
Discuss how to remove duplicate rows of SQL Data.
3.
Explain key features of database system.
4.
Write a note on solid-phase synthesis database.
5.
Write the steps to select a database.
6.
Explain how to search two database simultaneously.
7.
Explain solid phase synthesis database in details.
8.
Discuss HITSET ? How can HITSET be modified?
9. Write a short note on failed reaction database. How failed reaction
database are used in accord?
10. Explain how to modify the contents of database tables.
11. What is DBMS. Explain the uses and the components of DBMS.
12. Explain protecting groups database
www.icis.co.in
4
ICIS
email: info@icis.co.in
Module 3: Paint Production and
Manufacturing Technology
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
What do you understand by drying time of paints.Explain
2.
What are the advantages of micro-pulverizer.Expain
3.
Explain can - corrosion inhibitors.
4.
Give detailed summary on assessment of whiteness in paint film.
5.
Define pigment volume concentration with corresponding diagram.
6.
Explain scattering in paint particles by white pigments.
7.
Explain how colours are measured in terms of paint.
8.
What are the reasons for enormous paint failure and what is the
importance of durability test? Explain durability test methodology, test
sample preparation, chemical resistance testing and use of driers.
9.
Differentiate between fluorescence and phosphorescence.
10. What do you understand by chemical resistance testing. Discuss
11. Mention properties of steel. State criteria used for classification of steel
and explain different type of steel along with its properties.
12. Explain the process of estimation of free energy and energy isotherms.
www.icis.co.in
5
ICIS
email: info@icis.co.in
Module 4: Chemical Information Sources
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
Write short note on world wide web & Discuss its importance in detail.
2.
Why structure searching is used? Explain
3.
What is molecular formula index. Explain
4.
Explain biomolecule sequence and structure databases.
5.
What is the difference between primary and secondary literature ?
Describe mode of distribution of primary literature.
6.
Give detailed account on the contents of abstract record.
7.
Explain the use of structure searching.
8.
Describe prons & cons of computer searching in detail.
9.
Difference between bibliographic and non bibliographic.
10. Write down notes on “current science on internet”. Give list of chemical
applications of World Wide Web.
11. Explain patents, its requirements, patentable objects, also explain
patents on the international level.
12. Differentiate between basic chemical search skills and electron search
skills.
www.icis.co.in
6
ICIS
email: info@icis.co.in
Module 5: Formulation Principles & Practice
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
Explain electro powder coating in detail.
2.
Explain water borne coatings in detail.
3.
Explain the differences between electro powder coating & normal coating.
4.
Explain floating additives and flooding additives.
5.
Write a note on EPC (Electro Powder Coating).
6.
Differentiate between early type and modern types water soluble binders.
7.
Explain insulating varnishes. What are the categories of Insulating
varnishes?
8.
Classify the solvent and explain how the solvents are extracted from coal
tar with the help of example.
9.
Explain formulation of enamel paints.
10. What are insulating varnishes? Explain in detail.
11. What do you understand by additives. Explain main additives used for
paint formulation.
12. Explain bituminous paints / coating.
www.icis.co.in
7
ICIS
email: info@icis.co.in
Module 6: Coating Technology and Equipments
Exam Assignments, April - 2015
Max. Marks: 100
Answer the following questions (250-300 Words)
All questions carry equal marks.
Attempt any ten Questions :
10 × 10 = 100 Marks
1.
List out the properties of Polyimide & Discuss.
2.
Explain:
(i) Polyvinyl alcohols and acetates
(ii) Polyvinyl chlorides and fluorides.
3.
Define & Explain the two categories of coatings.
4.
Write a note on novolac resins and other epoxy compounds.
5.
Explain the formulation of vinyl paints in details.
6.
Explain various coating components with composition.
7.
Explain chlorinated rubber and epoxies
8.
Explain briefly CPVC along with different angles of deflected light?
9.
Write down the properties of chlorinated rubber.
10. Explain the differences between conventional anti-foulings and modern
anti-foulings.
11. Explain coating system design. What are desired properties of coating
system? Explain the factors influencing the choice of materials in a
coating system.
12. What are uses of chlorinated rubber paints? Give an idea about the
primers which are used in chlorinated rubber system.
www.icis.co.in
8
ICIS
email: info@icis.co.in