1. science
2. physics
3. optics

DM-16-ST-16M
Fiber Connection Outlet
16 port ST Simplex MultiMode fiber connection outlet
Features
16 port Simplex
16 x MultiMode
adaptors
installed
UNIGATE
CL-ProfibusDP
ST connections
Protocol Converter / Gateway from serial interface to ProfibusDP
160mm x 160mm x 80mm
Gland & fiber clips included
Specifications
Box for desk, wall, or underfloor mounting of fiber terminations
Comes with 16 x ST Simplex MultiMode adaptors installed
Ports numbered for identification
19mm knock out gland holes on 3 blank sides for cable entry
1.2mm zintec finished light grey RAL 7035
IncludesThe
cable
gland for
4-10mm
cable
Deutschmann
UNIGATE
Gateway
connects devices, such as automation components via their serial
interface (RS232, RS485, RS422, SSI) with ProfibusDP networks. With it the UNIGATE takes over the task
Size 160mm
x 160mm x 80mm
of a Protocol Converter and converts the different interfaces. Marketable standard protocols, such as
Modbus ASCII, Modbus RTU (Master or Slave), RK 3964, RK 3964R, Universal 232, Transparent mode and
many more can be set by means of a simple configuration via the PC-tool WINGATE. The UNIGATE CL
ProfibusDP
is exceptionally
flexible
and powerful
because
of its Scriptup
ability
it is suitable
for and also
Other variants
available
upon
request:
for SC
connectors,
toand
8 Duplex
ports
requirements that go beyond the standard protocols or for the conversion of your own protocols. This Script
Single Mode
fiber with the free PC-tool Protocol Developer and it is optimally adapted to the final product and
is generated
requirements of the PROFIBUS-Master. No changes have to be made in the final product's firmware.
Also available: 4 port and 8 port ST Simplex outlet box
for
Application
Ordering
Information
Deutschmann UNIGATE ProfibusDP is ideal for the use with terminal-units that do not have their own
Profibus-interface. The standard DIN-rail version features the protection type IP24.
DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet
Scope of functions
The Deutschmann UNIGATE Gateway uses the complete data capacity of ProfibusDP, that is 244 byte and
supports all speeds up to a maximum of 12 Mbit/s. The complete performance range of a Profibus Slave is
supported by UNIGATE. For the Profibus-connection a 9-pole D-SUB connector is provided, the connection
of the serial side is made through screw-plug-connector. The Profibus ID can either be set by means of the
integrated rotary coding switch, through the Profibus itself or the Script. A large number of diagnosis LEDs
signal the state of the device on the Profibus-side as well as on the serial side.
The special advantage of the UNIGATE CL-series is the Script-ability. Thus any changes in the firmware of
the terminal-unit are not necessary. Due to the Script the user has all liberties and possibility, from a simple
transparent data transfer over the generation of complex protocols up to editing data.
Tel: 0203 086 9569
Fax: 0203 002 5648
www.industrialcomms.co.uk
sales@industrialcomms.com
DM-16-ST-16M
Your advantage
Fiber Connection Outlet
With Deutschmann UNIGATE CL-modules you bring existing components (also older devices) into modern
networks. As device manufacturer you save the development of the interface based on the corresponding
Fieldbus or Ethernet. Due to the continuity of the Deutschmann UNIGATE CL-series Scripts that have been
generated once can be used practically without changes for other types of the Unigate CL-series based on
other Fieldbuses and Ethernet. The firmware adaptation of your own terminal-units becomes unnecessary.
16 port ST Simplex MultiMode fiber connection outlet
Features
Hotline and Support
team of qualified specialists will assist you with the selection of the device, start-up, configuration and the
16 port A
Simplex
generation of the Script. This offer is completed by trainings to the different subject areas.
16 x MultiMode adaptors installed
Quick info UNIGATE CL-ProfibusDP
ST connections
Supports ProfibusDPV0, DPV1and DPV2
160mm x Max.
160mm
x 80mm
244 byte input- and 244 byte output-data
Support
of upincluded
to 12Mbaud in the Profibus (autodetect)
Gland & fiber
clips
Isolated Profibus RS485-interface, optional galvanic isolation of the RS-side
Serial RS232, RS 422-, RS485- and SSI-interface on board
Baudrate of the device's serial interface adjustable up to 625,000 bit/s
When using the RS485-device interface up to 32 participants can be connected
Configurable for standard applications (Modbus ASCII, Modbus RTU Master or Slave, RK512, 3964,
3964R, DIN 19244) or programmable through the Deutschmann Script language
Generation of the Script through the free Protocol Developer
No change in the Firmware of your terminal-unit necessary
Specifications
Exchangeable for other Deutschmann Fieldbus Gateways and the types based on Ethernet
Box for desk, wall, or underfloor mounting of fiber terminations
Comes with 16 x ST Simplex MultiMode adaptors installed
Technical data
Ports numbered for identification
Dimensions
23 x 115
19mm knock
out gland holes
on x3100
blank sides for cable entry
(BxDxH in mm)
1.2mm zintec
finished light
grey RAL 7035
Mounting
DIN-rail
Voltage gland
supply for 4-10mm
10 up to 33cable
Volt DC
Includes cable
Protection against incorrect polarity, short circuit and
overload integrated
Size 160mm x 160mm x 80mm
Current
Typ. 120mA, max. 150mA
Also available:
4 port and 8 port ST Simplex outlet box
consumption
Operating
-20°C up to +70°C
Other variants
available upon
request: for SC connectors, up to 8 Duplex ports and also for
temperature
Single Mode fiber
Fieldbus functions
All specified ProfibusDP Slave functions
Technology
ASIC
Certificates
Profibus, CE
division
OrderingGalvanic
Information
Optional for the serial side, standard for the bus side
DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet
Order data
Order designation
Description
UNIGATE CLPBDPV1
DIN-rail module with seral interface RS232, 422 and 485 on-board to Profiibus. Additional Debug-interface,
Housing sky blue RAL 5015
V3553
UNIGATE CL-GYPBDPV1
DIN-rail module with seral interface RS232, 422 and 485 on-board -
V3781
Tel: 0203 086 9569
Fax: 0203 002 5648
Order no.
www.industrialcomms.co.uk
sales@industrialcomms.com
to Profiibus. Additional Debug-interface,
7035
DM-16-ST-16MHousing light grey RAL
Fiber
Connection Outlet
Optional
Galvanic separation RS-side (RSInterface)
on request
Optional
Customized design
on request
Starterkit Unigate
CL-PBDPV1
Starterkit Unigate CL-CANopen includes 1
Unigate CL-DPV1, debug cable,
application cable, adapter cable PC,
power supply, Manual, Software
P1077,
P1077E
Add-On ProfibusDPV0 consisting of
ProfibusDPV0 simulator, cable, software
P1047,
P1047E
Add-On ProfibusDPV1 consisting of
ProfibusDPV1 simulator, cable, software
P1089,
P1089E
16 portOptional
ST Simplex
MultiMode
fiber connection
outlet
Neutral
version
on request
Features
16 port Simplex
Add-On
ProfibusDPV0
16 x MultiMode adaptors installed
Add-On
ProfibusDPV1
ST connections
USB-RS232
USB-RS232 Converter, 20cm
V3654
USB-RS232
USB-RS232 Converter incl. adapter cable
P1208
160mm xConverter
160mm x 80mm
Gland & fiber
clips
Converter
incl.included
for Unigate CL-Range
adapter cable
Specifications
Box for desk, wall, or underfloor mounting of fiber terminations
Comes with 16 x ST Simplex MultiMode adaptors installed
Ports numbered for identification
19mm knock out gland holes on 3 blank sides for cable entry
1.2mm zintec finished light grey RAL 7035
Includes cable gland for 4-10mm cable
Size 160mm x 160mm x 80mm
Also available: 4 port and 8 port ST Simplex outlet box
Other variants available upon request: for SC connectors, up to 8 Duplex ports and also for
Single Mode fiber
Ordering Information
DM-16-ST-16M - 16 port ST Simplex MultiMode fiber connection outlet
Tel: 0203 086 9569
Fax: 0203 002 5648
www.industrialcomms.co.uk
sales@industrialcomms.com