1. science
2. engineering

M.TECH
2 Year Full Time & 3 year Part Time MTech Programmes
Some of our Distinguished Chief Guests
© 2015 ITM University, Gurgaon
No part of this document may be reproduced, used,
stored in a retrieval system, or transmitted, in any
form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the
prior permission of the copyright owner.
Mr Analjit Singh
Padma Bhushan
Chairman,Vodafone,
Chairman, Max New York
Life Insurance
Dr Surinder Kapur
Founder and Chairman
of Sona Group
Mr Subodh Bhargava
Chairman Tata
Communications Ltd.,
Chairman Wärtsilä Ltd.,
Chairman EmeritusEicher Group
Mr Tarun Das
Chairman of
Nomination Committee,
Trans Asia Hotels PLC and
Former Director General,
Confederation of Indian Industry
Mr Vikram S Mehta
Chairman, Brookings India
& Former Chairman,
Shell Companies in India
Mr Ajai Chowdhry
Padma Bhushan
Honorary Adjunct
Professor,
ITM University,
Founder – HCL,
New Delhi
Disclaimers
It is brought to the notice of the candidates that
Educate India Society (sponsoring body) has made
applications with various statutory authorities for
change of name of the ITM University, Gurgaon. After
permission to change the name is granted by the
statutory authorities, the degrees/certificates will be
conferred under the new name. It is clarified that the
approvals, affiliations and the status of the University
will continue to remain the same even under the new
name.
Padma Vibhushan
Dr Karan Singh,
Hon'ble Member of Parliament
(Rajya Sabha)
Prof. Kaptan Singh Solanki
(Hon’ble Governor of Haryana)
Prof. Ved Prakash
Chairman UGC
Dr. A.P.J. Abdul Kalam
Former President of India
Quality Benchmarks
Awarded No.1 Rank in All India Emerging Universities,
Higher Education Review - April 2015
Established under Haryana Private University (Third amendement) Act No. 25 of 2009
Recognised by the University Grants Commission, Govt. of India, under the UGC Act 1956,
and empowered to grant degrees under Section 22 of the Act.
Recognised by the Bar Council of India, Govt. of India
Accredited Undergraduate Engineering Programmes
Member of Association of Indian Universities
Recognised as the BEST
.govcampus
Accredited by Accreditation Services for International Colleges (ASIC), United Kingdom,
in the category of ‘Premier’ Universities
Member of International Students Exchange Programme
Member of the Association of Commonwealth Universities
Institutional Member of
American Society for Quality (India)
ISO 9001:2008 Certified
We have no other branch/campus in India or overseas.
Academic Advisory Board External Members
Mr Analjit Singh
Padma Bhushan
Chairman, Vodafone,
Chairman, Max New York
Life Insurance
Dr Devi Singh
Former Director - IIM,
Lucknow
Vice-Chancellor
JK Laxmipat University,
Jaipur
Mr Vikram S Mehta
Chairman,
Brookings India &
Former Chairman,
Shell Companies
in India
Mr Suresh C Rajpal
Chairman & CEO,
Visnova Solutions, Noida
Former President & CEO
Hewlett-Packard (India)
Prof. KL Chopra
Former Director,
IIT Kharagpur,
SS Bhatnagar Awardee
Prof. MK Jain
Ex- Dy. Director
IIT Delhi & Professor of
Mathematics
Prof. TK Datta
Dogra Chair
& Emeritus Professor,
Dept. of Civil
Engineering, IIT, Delhi
Prof. Siraj S Hasan
44
Prof. RC Budhani
Director
National Physical
Laboratory, New Delhi
Prof. Ranbir Singh
Vice Chancellor
National Law University,
New Delhi
Prof. SK Kak
Founder Vice Chancellor,
Mahamaya Technical
University, Noida
Prof. Karmeshu
ITM University
Prof & Dean,
School of Computer
& Systems Sciences,
JNU, New Delhi
SS Bhatnagar Awardee
Distinguished Professor
and former Director
Indian Institute of
Astrophysics, Bangalore
Prof. SK Joshi
Padma Bhushan
Former – DG,CSIR
& Hon. Distinguished
Scientist (CSIR)
Mr Satish Kaura
Chairman
Samtel Color Ltd
Prof. AS Brar
Vice Chancellor,
Guru Nanak Dev
University,
Amritsar, Punjab
Mr Ajai Chowdhry
Padma Bhushan
Honorary Adjunct
Professor,
ITM University,
Founder – HCL,
New Delhi
Dr PS Rana
Chairman & MD,
Pathera Developers &
Former Chairman & MD,
HUDCO
Dr Krishan Kumar
Executive Advisor,
Maruti Automotive
Centre for Excellence
Mr Vishnu R Dusad
CEO & MD,
Nucleus Software
Exports Ltd, Noida
Dr Krishan Lal
DST Ramanna Fellow
& Former Director,
NPL, New Delhi
Hon'ble Justice
M Karpaga Vinayagam
Chairperson – Appellate
Tribunal for Electricity
Dr Girdhar J Gyani
Director General,
Association of
Healthcare Providers
(India)
Prof. Kehar Singh
ITM University
Ex-Dean & Emeritus
Fellow, IIT Delhi
SS Bhatnagar Awardee
Prof. MS Sodha
Padmashree
Honorary Distinguished
Research Professor,
ITM University
Former Vice-Chancellor,
Barkatulla, Bhopal, Indore
and Lucknow Universities
SS Bhatnagar Awardee
Mr Mangu Singh
Managing Director,
DMRC, New Delhi
Prof. PB Sharma
Vice-Chancellor
Amity University,
Gurgaon
Prof. SG Deshmukh
Director
ABV IIITM, Gwalior
Mr Bunty Peerbhoy
Director,
Maa Group Holdings
Mr Indu Bhaskar
Scientist F & HOD,
Department of Scientific
& Industrial Research,
Team Leader
(TPDU Program), DSIR
New Delhi
Prof. Pradeep Kumar
Vice Chancellor,
Delhi Technological
University, New Delhi
INDEX
S. No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30
31.
32.
33.
34.
35.
32.
33.
34.
35.
36.
37.
CONTENT
INTRODUCTION
APPLICABILITY
INTAKE
MINIMUM ELIGIBILTY CRITERIA
GENERAL CONDITIONS
ADMISSION COMMITTEE
ADMISSION NOTICE
HOW TO APPLY
LAST DATE FOR RECEIPT OF APPLICATION FORMS
ACKNOWLEDGEMENT OF APPLICATION FORMS
IMPORTANT DATES
SELECTION PROCEDURE
ONLINE DISPLAY OF MERIT CUM ADMISSION LISTS
SECURING THE ADMISSION
FILLING OF DROPOUT SEATS UPTO THE LAST DAY OF ADMISSION
FEES
DOCUMENTS TO BE SUBMITTED AND VERIFIED AT THE TIME OF ADMISSION
GRIEVANCE REDRESSAL
LAST DATE FOR CANCELLATION / WITHDRAWAL OF ADMISSION
COMMENCEMENT OF ACADEMIC SESSION
LAST DATE OF ADMISSION
REFUND/CANCELLATION POLICY
MEDIUM OF INSTRUCTION
MID COURSE WITHDRAWALS
ZERO TOLERANCE POLICY TO RAGGING
FACULTY
ACADEMIC, IT PHYSICAL INFRASTRUCTURE
STUDENTS DISCIPLINE
LAPTOPS
LIMITED LIABILITY
JURISDICTION
HELPLINE
FACULTY OF SCHOOL OF ENGINEERING AND TECHNOLOGY (ANNEXURE 1)
SCHEME OF STUDIES OF ALL THE M. TECH. PROGRAMMES
APPLICATION FORM FOR ADMISSION TO
M. TECH. PROGRAMMES (ANNEXURE 2)
DECLARATION CUM UNDERTAKING (FORM-1)
HARYANA RESIDENT CERTIFICATE (FOR BONAFIDE RESIDENTS
OF HARYANA ONLY) (FORM -2)
HARYANA SCHEDULED CASTE CERTIFICATE (FORM-3)
SELF DECLARATION BY THE CANDIDATE (FORM-4)
SELF DECLARATION BY PARENT/ GUARDIAN (FORM-4 contd.)
AFFIDAVIT (FORM-5)
PAGE No.
1
1
2
3
6
7
7
8
9
10
10
11
11
11
12
12
13
14
14
14
14
14
15
15
15
16
16
20
21
22
22
22
25-26
27-43
45-47
48
49
50
51
52
53
ADMISSION POLICY & SELECTION PROCEDURE
FOR ACADEMIC YEAR 2015-16
FOR M. TECH. PROGRAMMES IN
SCHOOL OF ENGINEERING & TECHNOLOGY,
ITM UNIVERSITY, GURGAON
1.
2.
INTRODUCTION
1.1
ITM University, Gurgaon has been established by The Haryana State Legislature under The
Haryana Private Universities Act (Third amendment), 2009.
1.2
ITM University, Gurgaon is a self financed multi disciplinary University recognized by UGC with
the right to confer degrees under Section 22(1) of the UGC Act, 1956. For all details of the
University and courses run, refer to ITM University, Gurgaon website at www.itmindia.edu.ITM
University, Gurgaon has been included by UGC in their select list of approved Universities. This
list of recognized Universities can be obtained from the UGC website www.ugc.ac.in
1.3
This policy shall be called the “ADMISSION POLICY & SELECTION PROCEDURE-2015” (APSP2015) for admission to SCHOOL OF ENGINEERING & TECHNOLOGY M. TECH. Programmes
(MASTER OF TECHNOLOGY) awarded by ITM University, Gurgaon.
1.4
This policy has been prepared in accordance with the First Ordinances of ITM University duly
approved by Government of Haryana and ensures that admissions are made strictly in
accordance with merit in a fair and transparent manner in the interest of all concerned.
1.5
Admissions will be made based on marks/grades secured in the qualifying examinations.
Candidates with valid GATE score will be given preference.
APPLICABILITY
This “Admission Policy and Selection Procedure-2015” is applicable for admissions to all M. Tech.
Degree programmes offered by the School of Engineering and Technology (SOET) in the academic
session 2015-16.
01
3.
INTAKE
The number of seats for which admissions will be made to M. Tech. Degree programmes of full time
two years duration (four semesters) and part time three years duration (six semesters) in the academic
session 2015-16 are as under:
Department
MTech Specialization
EECE
(I) Electronics & Communication Engineering
(ii) VLSI Design
(iii) Embedded Systems
CSE
Computer Science & Engineering (CSE)
With option for specialization in Cyber Security
ME
M-Tech in Mechanical Engineering with option of specialization in
(i) Thermal Engineering
(ii) Mechanical Engineering Design,
(iii) Industrial and Production Engineering,
(iv) Automobile Engineering
CE
M-Tech in Civil Engineering with option of specialization in
(i) Structural Engineering
(ii) Construction Technology & Management
No. of Seats
60
80
20
20
(iii) Environmental Engineering
*For part time M-Tech programme
Working professionals can pursue MTech. degree programme part time for three years (six semesters)
duration in the CSE, ECE, ME & CE specializations as per the schedule of class timings offered by the
concerned department
02
3.1
Admission will be based solely on the merit criteria as per procedure indicated at paragraph 12
below, while ensuring an overall intake of 25% of total seats for Haryana Residents (Haryana
General = 15%, Haryana SC = 10%).
3.2
The intake shown in Section -3 above is subject to change by the University. An increase in
intake up to 20% of the total seats, may be made, based on merit to cater for any dropouts.
3.3
Minimum number of at least 15 candidates is required to run the above programme. However
this condition may be relaxed based on the discretion of the competent authority. In case, the
programme offered to the candidate is not run due to some reason then the candidate would
be given an option either to switch to any other M. Tech. programme running for which he/she
is eligible or withdraw from the programme. In case, the withdrawal from the programme
option is exercised by the candidate due to non running of programme, the application and
processing fee as well as the programme fee shall be refunded in full.
3.4
4.
The classes for all the programmes would be held on all working days, Monday to Friday from
8.30 A.M. to 4.30 P.M. or any other days and time as may be decided by the concerned
department.
MINIMUM ELIGIBILITY CRITERIA
4.1
To be eligible for admission to any of M. Tech. programmes offered by SoET, ITM University,
Gurgaon, in the academic session 2015-16, a candidate must be an Indian National and fulfill
the minimum eligibility criteria.
4.2
Applicants must have obtained minimum 60% marks in aggregate in the qualifying degree
(passed in English medium) mentioned against each M. Tech. programme as given below.
Alternatively, his/ her minimum CGPA (Cumulative Grade Point Average) must be 6.0 on a 10
point scale or equivalent.
Rounding of marks/ grades is not permitted.
The qualifying degree should be from any university approved by UGC or from an institution
declared to be deemed as university under section 3 of the UGC act 1956 or from a foreign
university recognized by the competent authority in the country where it is registered and has
equivalence from Association of Indian Universities (AIU)
A candidate from any university NOT recognized by AICTE/UGC/AIU/MHRD or any other
statutory body of Government of India shall not be eligible for admission.
03
4.3
Candidates appearing in the final year of their qualifying degree examination and those who
have appeared and awaiting their results can also apply. Such candidates must produce a
certificate from the Principal/ Head of the University/ Institution certifying that the candidate
is currently in the final year/ is awaiting final results and has obtained at least 60% marks or
equivalent based on latest available grades or marks. If selected, such candidates may be
permitted to join the programme provisionally subject to his/ her submitting the final results
latest by 25/08/2015. The admission will be confirmed only when the candidate submits the
mark/ grade sheet and a certificate of having passed the qualifying degree and his/ her result
complies with the minimum eligibility criteria at least by 25/08/2015. Non fulfillment of this
condition will automatically result in the cancellation of the provisional admission and the seat
under such circumstances shall be offered and filled by another eligible candidate. In such an
event, the fee deposited by the candidate will be refunded after deducting 1000 (Rupees one
thousand only).
4.4
In case a student has completed his/ her equivalent examination from an overseas board, he/
she shall necessarily have to obtain and submit along with his/ her application a certificate of
equivalence from the Association of Indian Universities (AIU).
DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING
4.5
M. Tech. in Computer Science & Engineering with an option of Specialization in Cyber Security
The qualifying degree for admission to M. Tech. in Computer Science and Engineering will be
B.E./ B.Tech in Computer Science & Engineering/ Computer Engineering/ Information
Technology/ Electronics and Communication Engineering/ Electronics & Instrumentation/
Electrical Engineering or MCA or M.Sc. (Computer Science, Information Technology,
Electronics, Software Engineering, Mathematics, Statistics, Physics).
The certificate of specialization in Cyber Security will be issued at departmental level by the
Head of the Department
DEPARMTENT OF ELECTRICAL, ELECTRONICS & COMMUNICATION ENGINEERING
4.6
M. Tech. in Electronics and Communication Engineering
The qualifying degree for admission to M. Tech. in Electronics and Communication Engineering
will be B.E/B. Tech in Electrical Engg./ Electrical & Electronics/ Electronics/ Instrumentation/
Electronics and Communication/Electronics & Telecommunication/ Electrical & Electronics/
Electronics Instrumentation & Control Engineering/ Instrumentation & Control or Control
Engineering or Mechatronics/ Biomedical Engineering or M. Sc. in Electronics/ Physics with
Specialization in Electronics.
4.7
M. Tech. in VLSI Design
The qualifying degree for admission to M. Tech. in VLSI Design will be B.E/B. Tech in Electrical
Engg./ Electronics Engg./ Instrumentation Engg./ Electronics and Communication Engg./
Electronics & Telecommunication Engg./ Electrical & Electronics Engg./ Electronics,
Instrumentation & Control Engineering/ Instrumentation & Control Engg./ Control
Engineering/Computer Science & Engineering/ Computer Engineering/ Information
Technology/M.Sc. (Electronic Science)/ M. Sc. in Electronics.
4.8
M. Tech. in Embedded Systems
The qualifying degree for admission to M. Tech. in Embedded System will be B.E./ B. Tech. in
Electrical Engg./ Electrical & Electronics Engineering, Electronics & Communication
Engineering, Electronics & Instrumentation Engineering, Instrumentation & Control
Engineering, Computer Science & Engineering, Computer Engineering/ Information
Technology, or M. Sc. in Electronics/ Physics with specialization in Electronics.
DEPARTMENT OF MECHANICAL ENGINEERING
4.9
M. Tech. in Mechanical Engineering with an option of specialization in
(a) Thermal Engineering,
(b) Mechanical Engineering Design,
04
(c) Industrial and Production Engineering,
(d) Automobile Engineering.
The qualifying degree for admission to M. Tech. in Mechanical Engineering will be B.E/ B. Tech or
equivalent degree in Mechanical Engineering, Automobile Engineering, Aerospace/ Aeronautical
Engineering, Production/ Manufacturing Engineering, Mechatronics, Mechanical and Automation
Engineering, Industrial Engineering, Material Science and Engineering, Production and Industrial
Engineering.
The certificate of specialization in Thermal Engineering or Mehanical Engineering Design or
Industrial and Production Engineering or or Automobile Engineering, as the case may be, will be
issued at departmental level by the Head of the Department
DEPARTMENT OF CIVIL & ENVIRONMENTAL ENGINEERING
4.10
M. Tech. in Civil Engineering with option of specialization in
(a) Structural Engineering
(b) Construction Technology and Management
(c) Environmental Engineering
The qualifying degree for admission to M. Tech. will be B.E/ B. Tech or equivalent degree in Civil
Engineering, Environmental Engineering, Aerospace/ Aeronautical Engineering, and M.Sc. in
Environmental Science.
The certificate of specialization in Structural Engineering; Construction Technology and
Management; or Environmental Engineering as the case may be, will be issued at departmental level
by the Head of the Department
05
4.11
Teaching Assistantship for Graduate Aptitude Test in Engineering (GATE) qualified candidates:
1.
ITMU is a Private, Multi-Disciplinary, and Self-Financed University with no Government
funding. However, it has implemented the award of ITMU M. Tech. Teaching Assistantship
Scheme to encourage the meritorious students who have passed the National level GATE
examination in the relevant discipline and are pursuing M. Tech. at ITM University, Gurgaon.
2.
The details of ITMU M. Tech. Teaching Assistantships for the GATE qualified students pursuing
M. Tech. at the ITM university, Gurgaon shall be as follows:
a)
ITMU M. Tech. Teaching Assistantship shall be given to those M. Tech. students who
have a GATE percentile score of 90 and above in the relevant discipline and are found
suitable to take up Tutorial and Laboratory work of 8 to 10 hours per week for UG
classes.
b)
The maximum amount of ITMU M. Tech. Teaching Assistantship is Rs. 10,000/- P.M.
c)
It may be noted that percentile represents the percentage of the ratio of candidates
who are below that candidate to the total number of candidates appeared in GATE
examination. For example: if number of candidates appeared in GATE exam is x and a
candidate’s rank is y, then:
Percentile ranking =
3.
Terms and conditions of the ITMU M. Tech. Teaching Assistantship and its continuation are as
follows:
•
All the eligible candidates for this assistantship should not be getting any other scholarship/
fellowship from any source during their study period at ITM University, Gurgaon. They will have
to give an undertaking in this regard. All GATE qualified students are encouraged to apply for
the PG scholarship recommended by UGC (F.43-2/2013 (SAIII). However as stated above a
candidate is eligible either for teaching assistantship by ITM University, Gurgaon or P.G.
scholarship by UGC as payable from any one source only during the entire programme.
•
They would pass all the examinations of the university in the first attempt; otherwise the
Teaching Assistantships will be discontinued.
•
They should not have done any act of indiscipline during their stay at the university.
Disciplinary Committee shall be empowered to recommend stoppage of Teaching
Assistantships in this regard.
•
They would undertake tutorial and laboratory work and any other academic work of 8-10 hrs
per week, as assigned by the HoD, with complete earnestness and sincerity.
•
In non-teaching working days, the concerned HoD may assign the work load of 8-10 hours per
week.
•
The work performed by the students will be scrutinized by the HoD. The approved amount of
assistantship per month may vary depending upon the satisfactory work performance or as
per the actual number of hours of work put in. Deduction of amount would be on the basis of
per hour. It may be noted that if no work load is assigned to the student due to some reason,
assistantship will not be provided.
•
The duration of the ITMU M. Tech. Teaching Assistantship is limited for a maximum duration of
two years and shall be reviewed on a semester basis, based on the results.
In case of any unauthorized payment or overpayment, the University reserves the right to
recover the same at any stage during the stay of the student at the University.
5.
GENERAL CONDITIONS
5.1
06
Before submitting an application for admission, the applicant must ensure that he/she fulfills
the minimum eligibility condition applicable to the case(s) under which admission is being
sought by him/ her. He/she must only apply after he/ she has fully read and understood the
Admission Policy and Selection Procedure, the fee structure and the refund / cancellation
policy of the University for Academic Session2015-2016. This booklet is also available on the
University website www.itmindia.edu for the information of all concerned and / or can be
obtained from the University against payment of Rs. 1000/.In the event the Admission
Committee of the University is not satisfied with the character or antecedents of an applicant in
the overall interest of maintaining the academic standards and discipline in the University, it
retains the exclusive right not to admit him/her to the University.
6.
7.
5.2
A candidate who furnishes particulars or submits documents, which are found to be false, or
suppresses material information, shall not be considered for admission, and, if he/ she has been
admitted on the basis of such information, besides legal action at his/ her cost, his/ her
admission shall stand automatically cancelled and the entire fee of any description whatsoever
paid by him/ her shall stand fully forfeited.
5.3
Mere possession of the prescribed academic qualifications does not entitle a candidate for
admission. Candidates shall have to fulfill all other conditions as spelt out in the “Admission
Policy & Selection Procedure-2015”.
5.4
STUDENTS/ PARENTS ARE CAUTIONED NOT TO USE ANY INTERMEDIARY OR BROKER FOR
SECURING ADMISSION. BESIDES BEING ILLEGAL, SUCH AN ACTION COULD RENDER THE
CANDIDATE INELIGIBLE TO PARTICIPATE IN THE ADMISSION PROCESS.
5.5
A student who wishes to be admitted after a gap period of one year and/ or, more (after passing
the qualifying degree examination) shall submit a letter in his own hand writing indicating his/
her engagement in that year, justifying the reasons of gap period and certifying that he/ she had
not been rusticated or had not been sentenced to Jail for a criminal offence. He/ she will
necessarily have to comply with the minimum eligibility criteria.
ADMISSION COMMITTEE
6.1
Admissions shall be made by an admission committee comprising of faculty and administrative
staff of the University nominated by the Vice Chancellor. The committee will be headed by the
Director, School of Engineering and Technology or Head of the concerned department, or a
person who is not less than the rank of a Professor.
6.2
The committee shall scrutinize the application forms for admission of the candidates in
accordance with the conditions of admission prescribed in the APSP-2015.
6.3
The decision of the admission committee on any matter concerning the Admission Policy and
Selection Procedure - 2015 shall be final and binding on all concerned, subject to review as
provided in Clause 18 in this APSP-2015.
ADMISSION NOTICE
7.1
07
To fill seats to the M. Tech. programmes offered by SoET in the academic session 2015-16, the
University shall publish an Admission Notice inviting applications from interested candidates.
The admission notice shall be published in at least two national dailies and / or their education
supplements.
8.
7.2
A copy of the admission notice along with this “Admission Policy and Selection Procedure2015” shall be uploaded on the website of the University www.itmindia.edu for the information
of all concerned on or before the admission notice is published in the national dailies and / or
their education supplements.
7.3
Not less than 60 days shall be given from date of first admission notice till the completion of
admission process.
HOW TO APPLY
8.1
There are three ways candidates can apply: (a)
Online on University website www.itmindia.edu: Candidates can fill in the form online
and also pay the application and processing fee of Rs. 1000/- online. They should
upload self-attested scanned copies of documents mentioned in Clause 8.2 of this
APSP-2015 along with the online application. They will receive an e-mail confirmation
for their online application and this confirmation will also constitute an
acknowledgement of having received the processing fee.
The documents mentioned in Clause 8.2 (along with the printout of the confirmation e-mail)
can also be sent by the applicant by post or can be submitted by hand to ITM University,
Gurgaon on or before the last date as mentioned in Clause 11 of this APSP-2015.
(b)
Off line Application Forms: Application forms can either be obtained
(i)
By hand from the University campus on payment of Rs. 1000/- by cash or demand draft
drawn in favour of ‘ITM University Gurgaon’ for application and processing fee.
(ii)
By post from the University by the applicants, addressing it to ‘Chairman-M. Tech.
Admission Committee, School of Engineering and Technology’ and giving their postal
address and enclosing a bank draft of Rs. 1000/- for application and processing fee in
favour of ‘ITM University Gurgaon’ payable at Gurgaon/Delhi only.
The applicant must write his/her full name, address and mobile number on the reverse of the bank
draft. Duly filled in application forms can then be submitted by post or by hand enclosing all
documents listed in Clause 8.2 in this APSP-2015.
(c)
08
Downloaded Application Forms: The application form can be downloaded from the website of
the University www.itmindia.edu. The completed application form should be submitted by
hand or by post at the University campus with the documents self-attested mentioned in
Clause 8.2 of this APSP-2015 along with the DD of Rs. 1000/- for application and processing fee
in favour of ‘ITM University Gurgaon’ payable at Gurgaon/Delhi only or in cash if application
form submitted by hand.
(d)
Application on plain paper shall not be accepted.
(e)
Cheques will not be accepted under any circumstances.
(f)
The application and processing fee is non-refundable. Therefore, candidates are
advised to submit their application forms only after due consideration of this fact.
8.2
Documents to be submitted along with the application form and other instructions:
Self-attested copies of following certificates are required to be submitted by post (Registered Post or
Speed Post only) or by hand while applying for admission to:
The Chairman,
M. Tech. Admission Committee,
ITM University, Sector - 23 A, Gurgaon-122017
Certificates (self-attested) to be submitted with all online/ offline applications:
9.
09
(i)
Class X Mark Sheet (as proof of date of birth).
(ii)
Graduation (or equivalent) Degree and Mark Sheet or last set of result declared.
(iii)
Valid GATE score card, if any.
8.3
Incomplete application forms and/or applications submitted without the processing fee and
required enclosures shall be invalidated.
8.4
Candidates should submit only one application form using any one of the three methods, i.e.,
online application, offline printed form or downloaded application form. Otherwise the
application is liable to be rejected.
8.5
It is made clear that admissions shall be made strictly on merit, to those who have applied on
the prescribed form, within the stipulated time limit prescribed in this Admission Policy &
Selection Procedure 2015 published by the University and have deposited the processing fee
and whose application has not been invalidated due to any shortcoming. Applications which are
incomplete and not in the prescribed form and not accompanied with the copies of documents
as given in para 8.2 shall be rejected.
LAST DATE FOR RECEIPT OF APPLICATION FORMS
9.1
Duly completed application forms on the prescribed form only should be submitted by eligible
candidates online, offline or on downloaded forms, so as to reach on or before 19.06.2015
provided that the Draft is also dated on or before 19.06.2015.
9.2
Postal applications and downloaded forms will only be accepted if accompanied with the
receipt of the processing fee issued by ITM University, Gurgaon and postmarked on or before
19.06.2015 provided that the Draft is also dated on or before 19.06.2015.
9.3
All ‘by hand’ Application Forms with processing fee shall be accepted at the University campus
on all days up to the last date for submission of forms, i.e. 19.06.2015 from Monday to Friday
from 09:00 am to 04:00 pm, and Saturdays (first, third and fifth) from 09:30 am to 12.30 pm.
9.4
Applications received after the last date specified in Clause 11 of this ‘APSP-2015’, for any
reason whatsoever, shall not be considered under any circumstances. Accordingly, in their own
interest, candidates should ensure timely submission of the application form.
10.
ACKNOWLEDGEMENT OF APPLICATION FORM
10.1
Applicants must insist on a receipt for the application form if submitted by him / her personally
by hand. Online applications shall be acknowledged by e-mail confirmation. For postal
applications, applicants shall be sent their receipts by post.
10.2 The receipt/acknowledgement shall constitute the only evidence for timely submission of the
application form with the processing fee.
11.
IMPORTANT DATES
Actions
S. No.
Dates
1
Uploading of Admission Policy and Selection Procedure
01.05.2015
2
Applications available online/Downloaded forms on the ITM University,
Gurgaon website www.itmindia.edu
01.05.2015
3
Application Forms available at the Campus (Offline Mode)
01.05.2015
4
Last date for submission of Application Forms with Processing Fee and
required documents by any mode, online, offline or by post
03.07.2015
5
Display of first admission cum merit list on the University website
www.itmindia.edu and at the campus
24.06.2015
6
Last date for payment of first semester fees for students offered admission
in the first list
02.07.2015
7
Online display of second admission cum merit list
07.07.2015
8
Last date for payment of first semester fees for students offered admission
in the second list
14.07.2015
9
Last date for withdrawal of admission with refund
17.07.2015
10
Last date for submission of mark sheets and result of qualifying degree with
minimum eligible marks by candidates offered provisional admissions
17.7.2015
11
Commencement of academic session
27.07.2015
12
13
Admission against vacant or dropout seats, if any, based on merit on firstcum-first-served basis for seats remaining unfilled/ dropouts after the last
date of withdrawal of admission.*
Last date of admission for any unfilled seats
17.07.2015
to
25.08.2015
25.08.2015
*Students taking admission against vacant/drop out seats, and subsequently withdraw on any account are not
eligible for refund of fee except if the seat so vacated, get filled up to the last day of admission.
10
11.1
Subsequent admissions may be held and list displayed if the seats are left unfilled. Admission in
such subsequent rounds and the revised admission dates shall be notified on the ITM
University, Gurgaon website.
11.2
Dates are subject to change solely at the discretion of the University. Change(s), if any, shall be
notified on the website for the interest of all concerned.
12.
SELECTION PROCEDURE
Subject to the minimum eligibility criteria, all admissions shall be made STRICTLY according to MERIT
followed by a personal interview by a committee chaired by concerned HoD, from amongst the
applicants based on the qualifying degree marks/grade and reservation category. Those candidates
with valid GATE score will be given preference.
13.
ONLINE DISPLAY OF ADMISSION CUM MERIT LIST
13.1
Based on valid GATE score/ or merit in the qualifying examination (if GATE score is not available/
not applicable) a merit-cum-admission list will be prepared out of the applications received on
or before the last date specified for submitting applications by hand/ post. Besides uploading
this list on the website of the University - www.itmindia.edu, it will also be displayed on the
notice board of the University for the information of all concerned on the same day as per
schedule given in Clause 11 of this APSP-2015.
13.2
The merit-cum-admission list will carry the following details of students in order of merit:
13.3
14.
11
(a)
Name of the Candidate
(b)
Father’s Name
(c)
Gender
(d)
Specialization in which admission granted
(e)
Whether full-time/ part-time
Before depositing the fee to secure their admission, in their own interest, candidates /
parents must refer to the refund/cancellation policy in case of withdrawal before and after
the last date of admission.
SECURING THE ADMISSION
14.1
Candidates whose names appear in the first or subsequent merit cum admission list displayed
by the University MUST meet the committee chaired by the Head of the concerned department
with all original documents for verification and then deposit their first semester fee in full as
given in Clause 16 of this APSP-2015 on or before the last date specified for the purpose, to
secure their admission.
14.2
Semester fee will not be accepted in part or in installments.
14.3
In the event, a student fails to deposit his/her fee on or before the date specified, the offer of
admission will stand automatically withdrawn and the student will have no claim whatsoever
on the seat.
14.4
Last date for payment of fees for securing admission and the amount of fee payable shall be in
accordance with Clause 11 and Clause 16 of this APSP-2015 respectively and will also be
mentioned in the covering note of the merit cum admission lists.
14.5
Before depositing the fee to secure their admission in their own interest, candidates / parents
must refer to the Refund/Cancellation policy as per Clause 22 and Clause 23 including the
provisions for a mid-course withdrawal as per Clause 24.
15.
16.
FILLING OF DROPOUT SEATS UPTO THE LAST DATE OF ADMISSION
15.1
Since seats are perishable and must be filled before the last date of admission, vacant and drop
out seats, if any shall be filled on ‘first-come-first-served’ basis subject to the minimum
eligibility criteria, upto the last date of admission i.e. 25/08/2015.
15.2
Any candidate who has not applied earlier but is desirous of admission during this period may
also apply on prescribed application form and pay 1000/- as application and processing fee.
15.3
The candidates appearing for admission against the vacant/dropout seats will have to go
through the selection procedure as per clause 12 of this APSP-2015. Merit list will be prepared
and candidates would be granted admission based on their merit as per the available seats.
FEES
PROGRAMME
FEE FOR GENERAL INDIAN STUDENTS
M. Tech.
(Two years duration of four semesters)
Rs. 68,000/(Per semester)
M. Tech.
(Three years duration of six semesters for part time)
Rs. 45,500/(Per semester)
Hostel Charges
(if applicable)
Rs. 40,000/- (Per semester)
12
16.1
No other fee/fund (except hostel fees, where applicable and 1000/- for a one time alumni
association charge) by whatsoever name called shall be payable by a student, other than the
annual fee prescribed in the year of his/her admission.
16.2
Fee applicable in the year of admission shall be subject to year on year increase of 3% for the
entire duration of the programme.
16.3
The total fee for the year including hostel charges if applicable will be payable in two equal biannual installment(s) (semester wise in advance).
16.4
Fees can only be paid by demand draft/credit card/debit card/cash. All demand drafts shall be
made favouring ‘ITM University Gurgaon’ and shall be payable at ‘Gurgaon’ or ‘New Delhi’.
16.5
Fee paid by a Candidate is not refundable under any circumstances in part or whole after
commencement of the academic session unless the seat is filled on or before the last date of
admission.
16.6
Candidate must obtain a receipt for every payment made to the University as that shall
constitute their only proof of payment.
16.7
Fees must only be paid at the accounts office of the University.
16.8 ITMU does not charge any security deposit or any such similar or related deposit refundable to a
student incase he/she withdraws from university before or after completion of the programme
of study.
16.9
EDUCATION LOANS are available to students under special arrangement for students of ITM
University, Gurgaon through CREDILA Financial Services (promoted by HDFC). To apply for loans
visit on www.credila.com/apply_for_loan.html. For any queries, you can go to
www.messenger.providesupport.com/messenger/credila.html. Forms are also available with
Accounts office, ITM University, Gurgaon.
16.10 In addition to Credila, Syndicate Bank, ITM University, Gurgaon is providing Education loans to
students of ITM University subject to eligibility criteria and guidelines, as per their education
loan scheme. Salient feature of scheme are as given below:
(1) Admission should be on Merit basis. (2) Parent will join the loan as co-borrower.
For further details visit www.syndicatebank.co.in or Contact on Mobile No. 9868394473 or
Email to : br.8247@syndicatebank.co.in.
17.
DOCUMENTS TO BE SUBMITTED AND VERIFIED AT THE TIME OF ADMISSION
17.1
Sr.
No.
Documents
Self
Original
Attested
Document Photocopy
Required Required
Documents to be
Returned on the
spot after
Verification &
deposit of fees
1
Class X mark sheet (as proof of date of birth)
Yes
Yes
Yes
2
Degree Certificate/ Mark sheet of
B. Tech./ B.E./ MCA/ M.Sc./
others (equivalent)/ latest available grades/ marks.
Yes
Yes
Yes
3
Valid GATE score card, if applicable
Yes
Yes
Yes
4
Certificate of medical fitness from a registered
medical practitioner
Yes
Yes
Yes
Character certificate from the College/ University
last attended
Yes
Yes
Yes
Certificate of migration and transfer certificate
Yes
Yes
Yes
Yes
No
No
8
Two copies of recent colour good quality
photographs (Size 3.5 X 4.5 cms)
Yes
Yes
No
9
Forms 1 to 4, as applicable
5
6
7
13
In addition to the fees, to secure their admission, candidates will be required to produce the
following certificates in original unless otherwise specified, and/or verification/submission as
mentioned below.
NOC from the employers for working professionals
Available as part of Application form
18.
19.
17.2
All original documents (other than migration certificate) shall be returned by the University as
per table above, after their due verification and receipt of fees.
17.3
Migration from your last institution to the university shall be deemed to be complete after the
last date of admission. The original migration certificate submitted by the candidate will
accordingly be cancelled by stamping across it.
17.4
Thereafter, NOC/Migration certificate shall be issued by the University within 15 days under its
seal in case of Migration / withdrawal after the last date of admission or on completion of the
degree after all dues have been cleared.
GRIEVANCE REDRESSAL
18.1
Grievance/ complaints, if any, against any action/ decision of the Admissions Committee can be
made in writing to the Vice Chancellor of the University, within three days of the decision.
18.2
In case there is any ambiguity whatsoever, with respect to this policy, Vice Chancellor’s written
interpretation/ clarification/ decision shall be final and binding on all concerned.
LAST DATE FOR CANCELLATION / WITHDRAWAL OF ADMISSION
Friday, 17th July 2015
20.
COMMENCEMENT OF ACADEMIC SESSION
Monday, 27th July 2015
21.
LAST DATE OF ADMISSION
Tuesday, 25th August 2015
No admission to the M. Tech. programme shall be made after 25.08.2015 under any circumstances,
whatsoever.
22.
14
REFUND/ CANCELLATION POLICY
22.1
All requests for cancellations/withdrawal of admission must be made in writing by the
applicant giving reasons for the same and must be accompanied with the original fee receipt
quoting the branch in which admission had been granted & JEE Roll No. Requests made verbally
or by fax/email or without the original fee receipt shall not be entertained.
22.2
In case a student withdraws his / her admission before the last date of withdrawal (on or before
17th July 2015) the fee deposited by him / her will be refunded after deducting Rs. 1000/- (One
thousand only) from the total amount of first semester fees. As there is no security amount in
programme fees, hence there is no refund, whatsoever, after completion of the programme.
22.3
The refund shall be made in the name of the student by crossed account payee cheque only and
shall be mailed by Registered post to the student within one month from the last date of
admission or earlier. There is no need for the student and / or his/her parent to visit the
University in this regard.
22.4
In case a student does not have a bank account and wishes to have his/her refund cheque in the
name of either parent, he / she shall submit a notarized affidavit along with the application for
withdrawal (specimen of affidavit available at Form-5)
23.
22.5
In case of withdrawal after the last date of cancellation / withdrawal (i.e. after 17th July 2015),
but before the last date of admission of unfilled seats (i.e. 25th August 2015) the fee deposited
will only be refunded if the dropout / vacated seat has been filled before the last date of
admission. Refund if at all, in this case as well will be subject to a deduction of Rs.1000/-
22.6
AICTE, UGC, and MHRD notifications on the subject are all in consonance with our refund &
cancellation policy and clearly state that “ if the seat consequently falling vacant has been filled
by another candidate, by the last date of admission, the institute must return the fee collected
with proportionate deductions of monthly fee and proportionate hostel rent, where
applicable.” (Authority “AICTE Public Notice, UGC Notification No. F.No. 6-1(7) 2006 (CPP-1)
dated 2011 and Govt. of India MHRD notification no. 14-4/2007-U.3(a) Dept. of Higher
Education date 20.4.2007.”
MEDIUM OF INSTRUCTION
The medium of instruction for the M. Tech. programme would be English.
24.
MID COURSE WITHDRAWALS
Since no mid-course admissions can be made by the University to fill a vacancy caused by a mid-course
withdrawal, No objection certificate or Migration certificate for a mid-course withdrawal to any
student shall only be given by the University to a student after he/she has deposited the balance years
fees and any other dues outstanding to the University as per Declaration cum Undertaking submitted
at the time of admission.
As per the Hon’ble Supreme Court and / or the competent authority, no admissions can be made by
the University to fill a vacancy that may arise after the last date of admission for unfilled seats (i.e.
25th August 2015). Therefore, in case of withdrawal after the last date of admission for unfilled
seats, it will be classified as a mid course withdrawal, as the seat so vacated will continue to remain
unfilled for the balance years of the degree, since no lateral entry admissions directly to the IInd year
are made by the University. In view thereof, in case of any mid-course withdrawal, no fee, by
whatsoever name called is refundable under any circumstances whatsoever and he/she has to
deposit the balance years fee.
25.
ZERO TOLERANCE POLICY TO RAGGING
25.1
15
Ragging is strictly prohibited in ITM University and ITM University follows a ZERO Tolerance
policy towards Ragging. Ragging, its abetment, eve-teasing and / or any kind of mental or
physical harassment, either directly or indirectly, of any student(s) by whatsoever name called
which may hurt the sensibilities or self-esteem of a student(s), inside or outside the University
and/or its hostel(s) / mess, cafeteria is strictly prohibited by law and as held by the Hon'ble
Supreme Court of India in its order dated 08/05/2009 in the case titled " University of Kerala Vs
Council, Principal's College Kerala & others" bearing CA No. 887/2009. An Anti-Ragging
Affidavit as per Form–4 have to be filled and submitted along with other documents at the time
of admission.
Disorderly conduct whether by words spoken or written or by an act, which has the effect of
teasing, treating or handling with rudeness any other student(s), indulging in rowdy or indisciplined activities which causes or is likely to cause annoyance, hardship or psychological
harm or to raise fear or apprehension thereof in a fresher or junior student(s) or asking the
student(s) to do any act or perform something, which such student(s) will not do in the ordinary
course and which has the effect of causing or generating a sense of shame or embarrassment so
as to adversely affect the physique or psyche of a fresher or a junior student shall constitute an
act of ragging.
26.
25.2
Association, active or passive, with any unlawful organization including holding and/or
participating in demonstrations, inciting violence, displaying notices or circulating handbills in
the University and/or its hostel (s)/mess is strictly prohibited.
25.3
Smoking, consumption of alcohol, drugs or any other intoxicant by whatsoever name called
within the University premises and/or its hostel (s)/mess is strictly prohibited by law.
25.4
Besides police/legal action, a student found indulging in any of the above activity(s) shall be
expelled from the University. In case of expulsion from the University, under such
circumstances, the entire fee paid by him/her shall be forfeited.
25.5
Use of cellular/satellite telephones and/or pagers within the University premises (other than
the Main Cafeteria area) is strictly prohibited.
FACULTY
ITM University has one of the best and largest pool of faculty amongst all the Universities in North India.
Many of the faculty members hold PhD degrees from renowned Indian and foreign universities with a
very distinguished track record and are drawn from prestigious institutions like IITs, NITs, Industry and
Research Labs. The faculty members have a mix of rich academic and industry experience. There is
strong emphasis on good quality teaching as well as research in current areas of technology and all the
faculty members keep themselves abreast with latest developments and are engaged in active
research resulting in a large number of research publications in leading international and national
journals. Many of the faculty members have published books in their specialized fields and are
members of editorial boards / reviewers of reputed journals. A department wise list of faculty
members in School of Engineering and Technology is placed at Annexure-2.
27.
ACADEMIC, IT & PHYSICAL INFRASTRUCTURE
IT INFRASTRUCTURE
IT Vision
16
•
Address user demand for sophisticated, high quality, ubiquitous and reliable ICT provision
whilst recognizing economic constraints.
•
Identify a long term, sustainable and accessible solution that addresses increasing demands for
storage and the integration and
interoperability of our ICT systems.
•
Enable capacity to meet increasing
network bandwidth demands and
reduce single points of failure that
would threaten the availability of
network connectivity.
•
Create additional efficiencies, whilst
improving service quality through core
ICT provision.
•
Improve information security provision i.e. the confidentiality, reliability and availability of ICT
systems.
Resource
Available
Computers (UG Courses)
744
Computers (PG Courses)
215
System Software
04
Application Software
51 (Details enclosed at ‘Appendix – C’)
Printers
112
Lan & Internet
Available on systems
Mail Server & Client
Using Google Apps from Google
Internet Bandwidth
60 MBPS
ITMU network has a backbone of optical fiber cable. Use of Unified Threat Management & Centralized AntiVirus Server, Windows update server, Virtual Private Network services, Learning Mgmt System, Virtual Labs,
Video Conferencing is provided. Access to the network from home – 24X7. Campus & Hostels are fully wi-fi.
ITMU was declared as Best e-Gov campus in 2014.
ACADEMIC INFRASTRUCTURE
ICT Facility
The University is connected with fibre optics on a
network which is wide, robust and secure. It has
moved to the 'dynamic host configuration
protocol', where the user can connect to the
network through any electronic communication
gadget through the wireless password.
ITM University now has a 60 MBPS dedicated
leased line, a fully-loaded Wi-Fi campus, digital
and multimedia library, networked computer
labs and Wi-Fi hostels.
17
There is a central computing facility in the University along with computers in the main library bringing the
total number of computers available on campus 1039. All classrooms are equipped with LCD projectors, with a
common UPS to ensure undisturbed presentations.
Committed to the automation of various academic, financial and administrative processes, the University is at
an advanced stage of completion of Enterprise Resource Planning (ERP) implementation based on cloud
computing, in a tie-up with Digiuniv.
Virtual Labs
ITMU is a nodal centre for Virtual Labs, where the University utilizes the facilities available at the IIT labs
through remote triggering. Virtual Labs is an initiative of the Ministry of Human Resource Development under
the National Mission on Education through Information and Communications Technology, wherein eight IITs
are currently involved. The aim of Virtual Labs is to provide remote access to labs in various disciplines of
science and engineering, where the students can avail of and share costly equipment and resources for
learning, including additional web resources, video lectures, animated demonstrations and self-evaluation.
Cisco Networking Academy
A Cisco Networking Academy, has been established in the University to meet the growing demand for ICT
professionals and also to improve the career prospects of IT students. Cisco certification is sought after by IT
professionals and greatly improves the prospects of students who want to build a career in the industry.
LIBRARY & INFORMATION RESOURCE CENTRE
The Library and Information Resource Centre (LIRC) at ITM University, a vanguard of its ever-growing
infrastructure development, consistently receives principal attention from the University management.
Currently, the LIRC has a collection of over 83,000 volumes in all areas of Engineering, Law, Sciences and
Management. The LIRC subscribes to over 800 print journals from reputable publishers, institutions, societies,
like Indian Academy of Science journals, IIMB Management Review, Decision, Vision, Harvard Business
Review, BCI Journal, etc. The LIRC has fully computerized its services with the Libsys Software. The circulation
of books is done with the bar-coded system placed on each book and an RFID system is planned in the future.
18
No. of Books
Discipline
National
Engineering & Sciences
48979
91
Management
3897
40
Law
2938
20
No. of Journals
International International Online
IEEE : 483,
ASME : 26,
44
ASCE : 34
ABI/INFORM: 308
03
SAGE
: 08
WESTLAW : 10
02
MANUPATRA : 07
(In addition, 114000 e-books and Journals through e-brary are available)
The details of facilities provided by the LIRC are as under:
•
Online Renewal of Books: The LIRC provides the facility of online renewal of books for all users.
Any user can reissue the books issued in their account through the WEBOPAC facility from
anywhere. The link to use this facility on the library page is www.library.itmindia.edu.
•
Multimedia Section: This section allows users to access the electronic resources subscribed to
by the LIRC. Twenty dual core machines with printer and scanner facility have been installed for
users. Head phones for access to audio-video materials are provided.
•
Ebrary (E-books Database): The LIRC subscribes to the Ebrary e-books database. These books
are related to the areas of engineering, law, management, applied sciences and general
collection books. This database has many advanced features like download of books, creating
bookshelves within the database.
•
Book Bank: A book bank facility is available for students of the School of Engineering and
Technology and School of Management. Students can join the book bank membership by
paying a nominal amount, and can take five books in each semester for permanent retention.
•
LIRC Web Page: Informs students about the resources subscribed to by the LIRC and information
on print books available in the library.
•
Online Resources: The LIRC subscribes to online electronic resources e.g. The IEEE Explore,
Elsevier Science Direct, American Society of Civil Engineers (ASCE), American Society of
Mechanical Engineers (ASME), EBSCO, SAGE Journals, MANUPATRA, Proquest Ebrary.
•
Remote Access Facility: Remote access facility to access all online resources is also provided.
With the help of a VPN user ID and password, users can access all subscribed resources at their
homes, 24X7.
PHYSICAL INFRASTRUCTURE
Academic life continues well supported by superior infrastructure. The campus, spread over 10 acres, with a
covered area of 22,000 square metres, currently has an academic infrastructure of 60 classrooms, 18 tutorial
rooms, 68 labs, 25 workshops, faculty cabins, a seminar hall, conference rooms and a 450 seat, state of art
Auditorium. The campus provides for a music club, photo club, yoga centre, and the Yukti Social Club. It has
sports facilities for nearly all indoor and outdoor sports. The cricket-cum-football ground is arguably one of the
finest grounds in the NCR, with floodlight facilities for night sports. Two air-conditioned cafeteria with a total
19
capacity of about 200 is one of the most prominent features
of the facilities provided to students. In addition, company
brands such as Amul and Nestle have popular outlets on
campus. The entire campus is wi-fi-enabled, fully airconditioned, with a 24-hour power back-up and a rainwater
harvesting system, ensuring minimal waste of rainwater.
The University provides hostel facilities to over 200
students. The rooms are well-furnished, and the hostels
also have a 24-hour power back-up system, treated water,
wi-fi, intercom, indoor sports facilities, a central kitchen, entertainment and recreational facilities, and a bus to
convey the students to and from the University.
During the year the infrastructure has been further expanded to cater to the future growth of the University.
An imposing state-of-the-art building has come up, which includes a double basement car park, additional
classrooms, research and other labs, besides faculty rooms and an auditorium. A large amphitheater has been
constructed on the campus during the year and is being used extensively for various university functions and
club activities. 234 faculty cabins were fully refurnished to improve the ambience for academic work.
In addition, the University has recently added a well-furnished Guest House which now enables visitors and
the new faculty joining the University to find a comfortable boarding and lodging facility opposite the main
gate of the University.
Energy Efficiency Survey by Power Grid Corporation:
ITM University, has adopted various energy efficient
technologies to conserve energy. Initiatives like installation of
LED lights in the new building, Variable Frequency Drive (VFD)
and toilet sensors have been installed in all the wash rooms.
Power Grid Corporation of India Ltd, was tasked to undertake
an energy audit of the University. ITM University plans to adopt
energy savings options recommended by them which are
practical and cost effective.
The Orientation Programme to admitted students will take place on 23rd July 2015 and is mandatory for all
admitted students.
28.
20
STUDENTS DISCIPLINE
(a)
The university expects that every student in the University shall at all times display good
behavior, show diligence in studies, maintain decorum and dignity, take due interest in cocurricular activities, observe a code of conduct both within and outside the campus in a
manner befitting to the student of a University of national stature and observe rules of
discipline of the University and thus ensure free and congenial environment for all its students
to pursue their studies without any distraction.
(b)
Each student shall show due respect and courtesy to the teachers, administrators and other
employees in and outside the University and good behaviour to fellow students including
residents in surrounding areas or around hostels. Students shall pay particular attention to
safeguard the dignity and honour of fellow girl students and the lady faculty and shall not do
anything directly, indirectly or through social media or aid any one in doing so, which could
cause mental or physical harassment, insult, defamation or outrage the modesty of women
inside or outside the campus.
29.
(c)
Association, active or passive, with any unlawful organization, including holding and
participating in demonstrations, inciting agitation and violence, display notices or circulating
unwanted emails or messages on social media, media or handbills in the University/and/or its
hostels(s) are strictly prohibited.
(d)
Smoking, consumption of alcohol, drugs or any other intoxicant by whatsoever name called
with the University premises and/or its hostel(s) is strictly prohibited by law.
(e)
Use of cellular/satellite telephones (other than main cafeteria premises) is strictly prohibited.
(f)
There is a complete prohibition of ragging in ITM University, Gurgaon and ITM University,
Gurgaon follows a ZERO tolerance policy towards ragging. The University strictly enforces
provisions of the Haryana Prohibition of Ragging in Educational Institutions Act 2012 and UGC
Regulations on Anti Ragging pursuant to Hon’ble Supreme Court of India order dated
08/05/2009 in the case tilted “University of Kerala Vs Council, Principal’s College Kerala.
(g)
No student shall practice ragging in any form within or outside the premises of the University,
hostels or PGs. In a proven case of ragging whether FIR has been lodged or not, invariably the
student shall face suspension for at least a period of two semesters and may also be imposed
with any one or a combinations of punishment mentioned in the Haryana Prohibition of
Ragging in Educational Institutions Act 2012 and reproduced in the Students Diary.
(h)
Besides, police/legal action, a student found indulging in any ragging or undesirable activity (s)
is liable to be expelled from the University or face such other punishments by the Disciplinary
Committee, as provided for in the Ordinance 8 of the First Ordinance and specified in the
Student’s Diary issue to each student on joining. In case of expulsion from the University, under
such circumstances, the student’s tuition or any other fee paid by him/her will be forfeited.
(i)
An Anti Ragging Affidavit as mentioned in relevant Form is attached to this prospectus and is to
be filled, signed and submitted by the student and parent, along with the other documents at
the time of admission.
LAPTOPS
Laptops are an important tool for learning for the students and are an integral part of modern day
higher education. In line with the best practices in leading global and national universities, ITM
University has introduced more extensive use of laptops in the education processes. The whole ITMU
campus is equipped with Wi-Fi and all the class rooms are equipped with teaching aids like LCD
projectors. The well stocked ITMU library also has large number of e-books and e-journals online for
access by the students. Some of the class tests, assignments, project work, presentations. etc. are also
required to be submitted online. It is therefore essential for all the students including newly joining
first year students to have a laptop of their own. All incoming students are therefore advised to
arrange their laptops once admitted to ITMU.(Recommended configuration: 500GB HDD, 6GB RAM, i5
21
or higher processor with OS Windows 7/8 or higher & with Wi—Fi). Necessary training to students for
effective use of laptops in learning is provided by ITMU.
30.
LIMITED LIABILITY
All admissions made by the Admission Committee are provisional and subject to confirmation by the
Chancellor of the University. If the admission of any candidate is not confirmed by the Chancellor, for
any reason whatsoever, the liability of the University will be limited only to the refund of full fees paid
by the candidate and that there shall be no further consequent liability on the University and / or any of
its employee.
31.
JURISDICTION
Disputes, if any, arising out of this Admission Policy & Selection Procedure shall be the subject matter
of exclusively of courts in Gurgaon only.
32.
HELPLINE
Queries if any, regarding the admission process and or any aspect thereof may please be addressed to:
The Chairman,
M. Tech. Admission Committee
School of Engineering & Technology
Important Telephone Nos.:1. Electrical, Electronics & Communication Engineering
Ms. Sharda Vashisth
Assistant Professor, Department of EECE, ITMU
Mobile No: 9582213588
M.Tech Admissions Enquiry
2. Computer Science & Engineering
Gaurav Aggarwal
Assistant Professor, Department of CSE, ITMU
Mobile No. 9999840290
3. Mechanical Engineering
Mr. Gagan Baradia
Assistant Professor, Department of ME, ITMU
Mobile No. 9990432508
4. Civil & Environmental Engineering
Ms. Purnima Bajpai
Assistant Professor, Department of CE, ITMU
Mobile No. 9999119621
All Online Admissions Enquiry
9999000118, 0124-4195264
General Enquiry
8447964584, 0124 – 2365811-13, 4195200
Email
mtechadmission2015@itmindia.edu
Website Address
www.itmindia.edu
Date: April 27, 2015
Place: Gurgaon
22
Vice-Chancellor
ITM University, Gurgaon
ANNEXUE - 1
FACULTY OF SCHOOL OF ENGINEERING AND TECHNOLOGY
NAME
DESIGNATION
QUALIFICATIONS
EXPERIENCE
IN YEARS
DEPARTMENT OF APPLIED SCIENCES
REGULAR FACULTY
Prof. Chandramowliswaran
Professor & HoD
M.Sc., PhD
17
Prof. A K Yadav
Professor
M.Sc., PhD
20
Prof. Kalika Srivastava
Professor
M.Sc., PhD
21
Prof. S. K. Jain
Professor
M.Sc., PhD
36
Dr Rashmi Tyagi
Associate Professor
M.Sc., PhD
21
Ms Aditya Sharma
Assistant Professor (chemistry)
PhD Chemistry (Thesis Submitted),
IIT Delhi
1
Dr Bharti Arora
Assistant Professor (chemistry)
PhD Chemistry, University of Delhi
Dr Kamlesh Sharma
Assistant Professor (chemistry)
PhD Chemistry, Jamia Milia
1.6
Islamia, New Delhi
1
Dr Tejpal Singh Chundawat
Assistant Professor (chemistry)
PhD Chemistry, University of Delhi
1
7
Dr Ambika Sharma
Assistant Professor (Physics)
PhD Physics, JUIT, Solan
Dr Hukum Singh
Assistant Professor (Physics)
PhD Physics, GB Pant University,
Ms Pranati Purohit
Assistant Professor (Physics)
PhD Physics, (Thesis Submitted),
Sambalpur University
13
Dr Ruchi Gupta
Assistant Professor (Physics)
PhD Physics, IIT Delhi
1
Dr Sunanda Vashisht
Assistant Professor (Physics)
PhD Opto-Electronics,
Dr Sunita Sharma
Assistant Professor (Physics)
PhD Physics, GJ University of
Ms Amita Bhagat
Assistant Professor (Mathematics)
PhD (Thesis Submitted)
Dr Ashutosh Pandey
Assistant Professor (Mathematics)
PhD Mathematics,DDU
Gorakhpur University
7
Dr Divya Agrawal
Assistant Professor (Mathematics)
PhD Mathematics, IIT Roorkee
6
Dr Gaurav Gupta
Assistant Professor (Mathematics)
PhD Mathematics, HNB Gsrhwal
Pantnagar
University of Delhi
Scinece & Technology, Hisar
IIT Roorkee
University, Srinagar
14
18
4
0.6
3.5
Dr Neha Yadav
Assistant Professor (Mathematics)
PhD Mathematics, MNIT, Allahabad
Dr Phool Singh
Assistant Professor (Mathematics)
PhD Mathematics, Banasthali
University, Jaipur
7
Dr Rahul Varshney
Assistant Professor (Mathematics)
PhD Mathematics
1.8
Dr Rani Yadav
Assistant Professor (Mathematics)
PhD Mathematics,
University of Delhi
1
7
Dr Ravindra Kishor Bisht
Assistant Professor (Mathematics)
PhD Mathematics,
Kumaon University, Nainital
2
Dr Sangeet Srivastava
Assistant Professor (Mathematics)
PhD Mathematics, IIT Delhi
6
Dr Sunil Hans
Assistant Professor (Mathematics)
PhD Mathematics, Jamia Milia
Dr Pawan Singh Raghav
Assistant Professor
Islamia, New Delhi
5
PhD
19
DEPARTMENT OF ELECTRICAL, ELECTRONICS AND COMMUNICATION
Prof. B.S. Panwar
Sr. Professor & VC
B.Tech (Electrical), M.Sc(Engg.),
Ph.D (Electrical Engg.)
Prof. Swaran Ahuja
Sr. Professor
B.Tech. (ECE), M. Tech. (ECE),
Ph.D.(Digital Signal Processing)
23
26
44
Mr. Anil Kumar Nigam
Assistant Professor
B.E., M. Tech.,Ph.D. (Pursuing)
36
Dr. Hemani Kaushal
Associate Professor
B.Tech., M.E., Ph.D.
13
Mrs. Anjali Garg
Associate Professor
B.E., M. Tech., Ph.D.(Pursuing)
18
Mrs. Sharda Vashisth
Assistant Professor
B.Tech, M. Tech., Ph.D. (Pursuing)
18
26
Mr. Jagdish Prasad Shivhare
Assistant Professor
B.E., Ph.D. (Pursuing)
Dr. Nitin Malik
Associate Professor
B.E. (Electrical Engg.), M.E.
(Industrial Systems & Drives), Ph.D.
13
Mrs. Anita Sharma
Assistant Professor
B.E, M. Tech., Ph.D. (Pursuing)
15
Mrs. Ashu Gautam
Assistant Professor
B.Tech, M. Tech.
10
Ms. Shaveta Arora
Assistant Professor
B.Tech, M. Tech., Ph.D. (Pursuing)
8
Ms. Kusum Dangi
Assistant Professor
B.Tech, M. Tech., Ph.D. (Pursuing)
7
Ms. Nidhi Sharma
Assistant Professor
B.Tech, M. Tech.
6
Ms. Shaifali Jain
Assistant Professor
B.E., M. Tech.
8
Ms. Pooja Sabherwal
Assistant Professor
B.Tech., M. Tech., Ph.D. (Pursuing)
7
Ms. Charu Rana
Assistant Professor
B.Tech.,M. Tech., Ph.D. (Pursuing)
7
Mrs. Sheila Mahapatra
Assistant Professor
B.Tech., M. Tech., Ph.D. (Pursuing)
8
Ms. Amanpreet Kaur
Assistant Professor
B.Tech., M. Tech., Ph.D. (Pursuing)
8
Ms. Vandana Khanna
Assistant Professor
B.Tech., M. Tech., Ph.D. (Pursuing)
10
Dr. Neeraj Kr. Shukla
Associate Professor
B.Tech., M. Tech.,Ph.D
16
Mr. Mandeep Singh
Assistant Professor
B.Tech., M. Tech., Ph.D. (Pursuing)
7
Ms. Jyothi Varanasi
Assistant Professor
B,Tech, M. Tech.(Power Systems)
9
Ms. Naresh Kumari
Assistant Professor
B.E., M. Tech., Ph.D. (Pursuing)
16
Mr Pankaj Rakheja
Assistant Professor
B.Tech.,M. Tech.
4
Mr. Saurabh Sachdeva
Assistant Professor
B.Tech, M. Tech.
6
Mr. Sidharth Bhatia
Assistant Professor
B.Tech, M. Tech., Ph.D. (Pursuing)
5
Mr. Kashish Jhamb
Assistant Professor
B.E.,M.Sc.(ECE)
4
Ms. Geetu Lalit
Assistant Professor
B.Tech.,M. Tech.
4
Mr. Nand Lal Yadav
Assistant Professor
B.Tech. M. Tech.
3
Mr. Nitin Garg
Assistant Professor
B.Tech. M. Tech.
3
Dr. Rekha Vig
Associate Professor
B.Tech, M. Tech., Ph.D(Pursuing)
16
Mr. Prateek Bindra
Assistant Professor
B.Tech, M. Tech.
3
Ms. Madhulika Arora
Assistant Professor
B.Tech, M. Tech.
3
Ms. Meenakshi Yadav
Assistant Professor
B.Tech.,M. Tech.
4
Ms. Sakshi Choudhary
Assistant Professor
B.Tech., M. Tech.
1
Ms. Deepti Chahar
Assistant Professor
B.Tech., M. Tech.
2
Mr. Naman Joshi
Assistant Professor
B.Tech., M. Tech.
2
Dr. Vinay Budhiraja
Associate Professor
B.Tech,M.Tech,Ph.D
2
Dr. Prabhat Sharma
Associate Professor
B.Tech,M.Tech,Ph.D
4
Mr. Pavan Khetarpal
Assistant Professor
B.Tech,M.Tech,Ph.D(Pursuing)
7
Honorary Professor
B.Engg., M.Engg.,Ph.D
46
Distinguished Faculty
B.E.
46
VISITING FACULTY
Dr. Satyasheel
DISTINGUISHED FACULTY
Mr. Gian Chandra
DEPARTMENT OF COMPUTER SCIENCE AND INFORMATION TECHNOLOGY
REGULAR FACULTY
Prof. Prabha Sharma
Distinguished Professor Emeritus
PhD
39
Prof. B. K. Gupta
(Director SA)
Professor
PhD(Cryptology)
39
Dr Meena Kumari
Professor
PhD
1
Dr Latika Singh
Associate Professor & HOD
PhD
11
Dr Akansha Singh
Associate Professor
PhD (Pursuing, Thesis Submitted)
4
Dr Ashish Saini
Associate Professor
PhD
3
Dr Deepti Gaur
Associate Professor
MTech, PhD
14
24
Dr Kavita Choudhary
Associate Professor
MTech (IT), PhD
7
Ms Prachi Ahlawat
Associate Professor
PhD (Thesis Submitted)
5
Dr Supriya P. Panda
Associate Professor
PhD
28
Dr Usha Batra
Associate Professor
PhD (Thesis Submitted)
11
Dr A Charan Kumari
Assistant Professors
PhD (Thesis Submitted),
13
Mr Anil Kumar Mishra
Assistant Professors
MTech, PhD (Pursuing)
15
Ms Anuradha Dhull
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
4.5
Mr Deepak Satyarthi
Assistant Professors
MTech
13
Ms Divya Sharma
Assistant Professors
MTech, PhD (Pursuing)
6
Mr Gaurav Aggarwal
Assistant Professors
MTech, PhD (Pursuing)
5
Ms Geetika
Assistant Professors
MTech, PhD (Pursuing)
7
Mr Hemant Salwan
Assistant Professors
MTech (CSE)
3
Ms Hitesh Yadav
Assistant Professors
MTech (CSE), PhD (Pursuing)
1
Ms Jagdeep Kaur
Assistant Professors
PhD (Pursuing), MTech (CSE)
9
Ms Jyotika Pruthi
Assistant Professors
MTech (CSE), PhD (Pursuing)
2
Ms Jyotsna Singh
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
12
Ms Meghna Sharma
Assistant Professors
MTech, PhD (Pursuing)
10
Ms Neeti Kashyap
Assistant Professors
MTech (IT), PhD (Pursuing)
4
3.5
Ms Neha Goyal
Assistant Professors
MTech (Computer Science)
Ms Neha Sahu
Assistant Professors
MTech (CSE)
1
Ms Neha Singh
Assistant Professors
MTech (CSE), PhD (Pursuing)
2
Ms Niharika Garg
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
10
Ms Nisha Kharab
Assistant Professors
MTech (CSE)
3
Ms Poonam Sharma
Assistant Professors
MTech (CSE)
2
Ms Richa Chabbra
Assistant Professors
MTech (CSE)
1
Ms Rita Chhikara
Assistant Professors
MTech, PhD (Pursuing)
14
Mr Sandeep Singh
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
Ms Shilpa Mahajan
Assistant Professors
11
MTech (Computer Science),
PhD (Pursuing)
6
Ms Sonal Gahlot
Assistant Professors
PhD (Pursuing)
Ms Sonal Tuteja
Assistant Professors
MTech (CSE)
0.6
2
5.5
Ms Sujata
Assistant Professors
MTech (SE), PhD (Pursuing)
Ms Suman Bhatia
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
7
Ms SumanLata Gautam
Assistant Professors
MTech, PhD (Pursuing)
4
Ms Supriya Raheja
Assistant Professors
MTech (Computer Science),
Ms Yogita Gigras
Assistant Professors
MTech (Computer Science),
PhD (Pursuing)
PhD (Pursuing)
5
5
DEPARTMENT OF MECHANICAL ENGINEERING
REGULAR FACULTY
Prof. Ravindra Ojha
Director - School of Engineering &
Dr. Pramod Bhatia
HoD, Department of Mechanical Engg.
Associate Professor
B. Tech, MS, PhD
13
Dr. Prahlad Singh Jadon
Associate Professor
A.M.I.E. M. Tech. PhD
18
Technology
B. Tech, M.E., PhD (Pursuing)
32
Dr. Abhinav Gupta
Associate Professor (Designate)
B.E. M.S. PhD
10
Dr. K. Mathyazhagan
Associate Professor (Designate)
B.E. M.E., PhD
5
Dr. Rohit Singh Lather
Associate Professor (Designate)
B. Tech, M. Tech. PhD
6
25
Dr. Feras Hakkak
Associate Professor (Designate)
B. Sc. M. Sc. PhD
25
Dr. Ritvik Basu
Associate Professor (Designate)
B. E. M. Tech. PhD
4
Mr. Ashwini Kumar Sharma
Assistant Professor (Sr. Scale)
B. Tech, M. Tech. PhD (Pursuing)
16
Mr. Manoj Kumar Gopaliya
Assistant Professor (Sr. Scale)
B.E. M. Tech. PhD (Pursuing)
10
Mrs. Shiv Manjaree Gopaliya
Assistant Professor (Sr. Scale)
B.E. M. Tech. PhD (Pursuing)
9
MR. Amit Arora
Assistant Professor (Sel. Grade)
B. Tech M. Tech.
5
Ms. Swati Bharadwaj
Assistant Professor
B. Tech M. Tech. PhD(Pursuing)
20
Mr. Abhishek Pratap Singh
Assistant Professor
B. Tech M. Tech. PhD (Pursuing)
8.5
Mr. Pardeep Kumar Rohilla
Assistant Professor
B. Tech M. Tech, PhD (Pursuing)
8
Mr. Lalit Upadhayay
Assistant Professor
B. Tech M. Tech. PhD (Pursuing)
6.5
Mrs. Shikha Kashyap
Assistant Professor
B. Tech M. Tech.
6
Mr. Devendra Kumar Pathak
Assistant Professor
B. Tech M. Tech.
4
3.5
Mr. Deevesh Sharma
Assistant Professor
B. Tech M. Tech.
Mrs. Amrita Jhawar
Assistant Professor
B. E. M. Tech.
4
Mr. Anmol Bhatia
Assistant Professor
B. Tech M. Tech.
4
Mr. Deepak Monga
Assistant Professor
B. Tec, M.E.
Mr. Gagan Baradia
Assistant Professor
B. E, M. Tech.
2.5
5
Ms. Renu Sharma
Assistant Professor
B. Tec, M. Tech.
3.5
Mr. Sudhakara S.
Assistant Professor
B. Tech M. Tech.
2.5
Ms. Neha Bhatia
Assistant Professor
B. Tech M. Tech.
2
Mr. Ashish Singh Pareta
Assistant Professor
B. E. M. Tech.
3
Mr. Anuj Sharma
Assistant Professor
B. Tech M. Tech.
2
Emeritus Fellow
B.Tech, M. Tech. MBA
43
Prof. R. Singh
Hon. Distinguished Professor
B.E., M.E., PhD
39
Prof. Karmchetty
Hon. Adjunct. Professor
BS, MS, PhD
35
Assistant Professor
B. Tech M. Tech.
4.5
University Fellow
B.E., M.E., Pursuing PhD
EMERITUS FELLOW
Prof. J.K. Gera
ADJUNCT
CONTRACT FACULTY
Ms. Deepa Manani
VISITING FACULTY
Ms. Meenu Munjal
5
DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING
REGULAR FACULTY
Dr. S. Ghoshal
Prof. & Head
Ph.D.
22
Brig. (Retd.) S.K.Sharma
Prof. & Advisor to GB
B.Arch.
36
Dr. Anil Kumar Misra
Associate Professor
Ph.D.
15
Dr. Amit Srivasatava
Associate Professor
Ph.D.
6
Dr. Sudheer Chintalapati
Associate Professor
Ph.D.
Ms. Vaishali Sahu
Assistant Professor (SS)
M. Tech. Pursuing Ph.D.
7.5
Ms. Prachi Sohoni
Assistant Professor
M. Tech. Pursuing Ph.D.
7.5
Mr. Ankit Pachouri
Assistant Professor
M. Tech.
2
Mr. Rohith P. Poyil
Assistant Professor
M. Tech.
3
Ms. Purnima Bajpai
Assistant Professor
M. Tech.
4
Mr. Lokesh Choudhury
Assistant Professor
M. Tech.
1
Ms. Garima Srivastav
Assistant Professor
M. Tech.
1
Ms. Tanvi Gupta
Assistant Professor
M. Tech.
1
Ms. Megha Kalra
Assistant Professor
M. Tech.
2.5
EMERITUS PROFESSOR AND FELLOW
Prof. P.K. Swamee
Emeritus Professor
Ph.D.
51
Prof. S. Krishamoorthi
Emeritus Fellow
M. Tech.
47
26
27
ECL508
Wireless Mobile
Communication
3-0-2(4)
Program
Elective
Elective-4
2-0-2(3)
ECL506
Optical
Communication
3-0-2(4)
ECL653
Telecom
Systems &
Technologies
3-0-2(4)
ECD602
Dissertation
( Phase-2 )
0-0-24(12)
ECL503
Advanced
Processors
3-0-2(4)
ECL501
Digital Signal
Processing
3-0-2(4)
Open Elective
2-0-2(3)
ECL505
Adv. Digital
Communication
3-0-2(4)
Program
Elective
Elective-3
2-0-2(3)
Program
Elective
Elective-2
2-0-2(3)
ECD605
Dissertation
(Phase-1)
0-0-6(3)
Program
Elective
Elective-1
2-0-2(3)
ECL507
Microelectronics
and VLSI Design
3-0-2(4)
Course Code
Course Name
(L-T-P) C
TOTAL
ECV604
Laboratory*
Teaching Training
4hrs/week
ECT607
Summer/
Industrial
Training
6weeks-1
ECD512
Minor
Project
0-0-4-2
ECC509
Seminar
0-0-2-1
00
4
4
5
Lecture
Course
00
9
12
15
L
* Laboratory teaching training is included in fourth semester where students will be associated with faculty in the labs.
IV
III
II
I
Sem
00
00
00
00
T
M. Tech. in Electronics and Communication Engineering
Department of Electrical, Electronics & Communication Engineering
24
8
8
10
P
86
24
17
20
25
62
12
14
16
20
Contact
Hour
Credits
per
Week
Master of Technology in Electronics & Communication Engineering
Department of Electrical, Electronics & Communication Engineering
Category
Credits
PC
PE
OC
Total
47
12
3
62
Programme Core (PC)
L-T-P
Programme Elective (PE) - II (Elective-II)
ECL502
C
Digital Image Processing
2-0-2
3
ECL504
Modern Telecom Switching systems
2-0-2
3
ECL514
Digital System Design
2-0-2
3
ECL515
Simulation and Modeling
2-0-2
3
ECL516
Special Topics in Electronics
& Communication
2-0-2
3
ECL501
Digital Signal Processing
3-0-2
4
ECL503
Advanced Processors
3-0-2
4
ECL505
Advanced Digital Communication
3-0-2
4
ECL524
Low Power VLSI Design
2-0-2
3
ECL506
Advanced Optical Communication
3-0-2
4
ECL526
System Identification
2-0-2
3
ECL507
Microelectronics & VLSI design
3-0-2
4
ECL562
Millimetre Wave Integrated Circuits
2-0-2
3
ECL508
Wireless & Mobile Communication
3-0-2
4
ECC509
Seminar
0-0-2
1
ECD512
Minor project -I
0-0-4
2
ECD602
Dissertation (Phase-2)
0-0-24
12
ECD605
Dissertation (Phase-1)
0-0-6
3
ECT607
Summer/Industrial Training
6 weeks
1
ECL653
Telecom Systems & Technologies
3-0-2
4
Total PC
47
Programme Elective (PE) - I (Elective-I)
Programme Elective (PE) - II (Elective-III)
ECL564
Soft Computing
2-0-2
3
ECL566
Nanotechnology
2-0-2
3
3
ECL568
Research Methodology
2-0-2
ECE528
Analog VLSI design
2-0-2
3
ECL572
Modern Antenna and Arrays
2-0-2
3
ECL574
Optimization Techniques
2-0-2
3
ECL576
Network Security
2-0-2
3
ECL578
Broadband Communication
2-0-2
3
Programme Elective (PE) - III (Elective-IV)
ECL515
Simulation and Modeling
2-0-2
3
ECL611
Mobile Computing
2-0-2
3
ECL517
Information Theory and Coding
2-0-2
3
ECL619
Algorithms for VLSI Design Automation
2-0-2
3
ECL521
Random Processes in Control
Systems & Estimation
2-0-2
3
ECL535
Microwave Theory & Circuits
2-0-2
3
ECL537
Detection and Estimation Theory
2-0-2
3
ECL539
Speech Communication
2-0-2
3
ECL541
Electronics System Design
2-0-2
3
28
ECL621
Statistical Signal Processing
2-0-2
3
ECL623
Telecom Network Management
2-0-2
3
ECL655
Access Networks
2-0-2
3
ECL657
Wireless Sensor Networks
2-0-2
3
ECL578
Broadband Communication
2-0-2
3
29
IV
III
II
I
Sem
ECL-528
(0-0-24-12)
(L-T-P-C)/
Phase-2
Thesis
ECD-602
3-0-2(4)
with SV
Verification
ASIC Design &
ECL-625
3-0-2(4)
Design
Analog VLSI
Design
3-0-2(4)
VLSI Design
2-0-2(3)
2-0-2(3)
Elective-2
2-0-2(3)
Elective-3
Program
System
Aided
Program
ECL-532
Embedded
3-0-2(4)
& Technology
Total
Device Modeling
ECL-530
Design
3-0-2(4)
Computer
Architecture
ECL-525
Semiconductor
Computer
Digital VLSI
Analysis of
3-0-2(4)
ECL-523
ECL-531
Design and
Course Code
Course Name
Open Elective
2-0-2(3)
OR
3-0-0(3)
2-0-2(3)
Elective-1
Program
3-0-2(4)
VerilogHDL
DSD with
ECL-527
0-0-6(3)
Phse-1
Thesis
ECD-605
0-0-4(2)
Project-1
Minor
ECD-512
3-0-2(4)
C++
Algorithm in
Structures &
Data
CSL-527
ECC-528
01
0-0-0(2)
Training
Industrial
Summer
ECT-607
0-0-2(1)
Study
Independent
13
00
04
04
05
Lecture
Courses
34
00
09
10
15
L
00
00
00
00
00
T
62
24
14
14
10
P
Master of Technology in VLSI Design
Department of Electrical, Electronics & Communication Engineering
96
24
23
24
25
67
12
18
17
20
Contact
Hour
Credits
per
Week
Master of Technology in VLSI Design
Department of Electrical, Electronics & Communication Engineering
Category
Programme Elective (PE)
PC
PE
OE
Total
55
09
03
67
Credits
Programme Core (PC)
L-T-P
ECL-511
C
Minor Project-1
0-0-4
02
ECL-523
Digital VLSI Design
3-0-2
04
ECL-525
Semiconductor Device Modeling
& Technology
3-0-2
04
ECL-527
Digital System Design with VerilogHDL
3-0-2
04
ECL-528
Analog VLSI Design
3-0-2
04
ECC-528
Independent Study
0-0-2
01
ECL-530
Computer Aided VLSI Design
2-0-2
03
ECL-531
Design and Analysis of Computer
Architecture
3-0-2
04
ECL-532
Embedded System Design
3-0-2
04
ECD-605
Thesis(Phase-1)
0-0-6
03
ECD-602
Thesis (Phase-2)
0-0-24
12
ECT-607
Summer Industrial Training
ECL-625
ASIC Design & Verification with SV
CSL 527
Data Structures & Algorithm in C++
Open Elective (OE)
***
Course Name
***To be decided at the start of the Semester.
30
C
2-0-2
03
PE for Semester - II
ECD-512
Engineering Arts & Science (EAS) Core
L-T-P
6 Weeks 02
3-0-2
04
L-T-P
C
3-0-2
04
L-T-P
C
2-0-2
OR
3-0-0
03
Advanced Digital Signal Processing
ECL-534
CMOS RF Circuit Design
2-0-2
03
ECL-536
VLSI Fabrication and Technology
2-0-2
03
ECL-538
Hardware-Software Co-design
2-0-2
03
ECL-540
Real Time Systems & Softwares
2-0-2
03
ECL-542
Designing with ASICs
2-0-2
03
2-0-2
03
PE for Semester – III
ECL-502
Digital Image Processing
ECL-524
Low-Power VLSI Design
2-0-2
03
ECL-627
MEMS
2-0-2
03
ECL-629
Cryptography and Crypto Chip Design
2-0-2
03
ECL-631
Design of VLSI Systems
2-0-2
03
ECL-633
Mixed Signal Design
2-0-2
03
ECL-635
Microwave & Optoelectronic Devices
2-0-2
03
ECL-637
VLSI Test & Testability
2-0-2
03
ECL-639
Bluetooth Technology
2-0-2
03
31
III
(0-0-24)12
Phase-2
Thesis
Program
Elective-3
(2-0-2)3
(2-0-2)3
Interfacing
$Open Elective
(3 Credits)
Program
Elective-1
(2-0-2)3
ECL-550
Embedded
System Design
(3-0-2)4
(0-0-6)3
Phase-1
Thesis
ECD-605
Program
Elective-2
(2-0-2)3
ECL-527
DSD
(3-0-2)4
ECT-607
Summer
Industrial
Training
(0-0-0)2
(0-0-4)2
Project
Minor
ECD-512
CSL-529
Data
Structures
(2-0-2)3
ECV-604
@Laboratory
Teaching
Training
4Hrs/Week
ECC-528
Research
Seminar
(0-0-2)1
00
03
04
05
Lecture
Courses
00
7
9
14
L
00
00
00
00
T
24
12
14
10
P
24
19
23
24
Contact
Hour
per
Week
@Laboratory Teaching: Training is included in fourth semester where students will be associated with faculty in the labs
Total = 62 Credits
IV
ECL-641
Advance
Embedded
System Design
(3-0-2)4
II
ECD-602
ECL-546
ECL-544
Networked
Embedded
Systems
(3-0-2)4
I
Real World
ECL-501
Digital Signal
Processing
(3-0-2)4
Course Code
Course Name
ECL-533
Real Time
Systems
(3-0-2)4
Sem
12
15
16
19
Credits
Master of Technology in Embedded Systems
Department of Electrical, Electronics & Communication Engineering
About Specializations- M.Tech program offered by Electrical, Electronics and
Communication Engineering
EECE department is offering M.Tech program in three specialized areas
a.
M. Tech. in Electronics and Communication Engineering
b.
M. Tech. in VLSI Design
c.
M. Tech in Embedded Systems
Our M.Tech program helps in an overall development of the student in various aspects desired for a
successful career in engineering industries/institutions/research while being aware of his societal
responsibilities and limitations. All the programs are very comprehensive and in-line with the latest
trends in the industry and academia.
M.Tech in Electronics and Communication Engineering: This program is of 62 credits in which students
are expected to earn 47 program core credits, 12 program elective credits and 3 open elective credits.
M.Tech in VLSI Design: This program is of 67 credits in which students are expected to earn 55 program
core credits, 9 program elective credits and 3 open elective credits.
M.Tech in Embedded Systems: This program is of 62 credits in which students are expected to earn 50
program core credits, 9 program elective credits and 3 open elective credits.
32
Programme Code: EC7
Master of Technology in Embedded Systems
Department of Electrical, Electronics & Communication Engineering
Category
PC
PE
OC
Total
Credits
50
09
03
62
Programme Elective (PE)
L-T-P
C
ECL501
Digital Signal Processing
3-0-2
04
ECD512
Minor Project
0-0-4
02
ECL527
Digital System Design
3-0-2
CSL527
Data Structures & Algorithms in C++
2-0-2
03
ECC528
Research Seminar
0-0-2
01
ESL529
Data Structures
2-0.2
C
2-0-2
03
PEs for Semester II
CSL517
Programme Core (PC)
L-T-P
03
Advances in Operating System
ECL538
Hardware – Software Co-design
2-0-2
03
ECL542
Designing with ASICs
2-0-2
03
ECL548
Pervasive Computing
2-0-2
03
ECL552
Embedded Software Testing
2-0-2
03
ECL554
Computer Vision
2-0-2
03
ECL556
Software Modeling for Embedded System 2-0-2
03
ECL558
Embedded Robotics
2-0-2
03
ECL533
Real Time Systems
3-0-2
04
ECL544
Networked Embedded Systems
3-0-2
04
PEs for Semester III
L-T-P
C
ECL639
2-0-2
03
ECL546
Real world Interfacing
2-0-2
03
ECL550
Embedded System Design
3-0-2
04
ECL643
Advance Digital Image Processing
2-0-2
03
ECD602
ECD605
Thesis(Phase-2)
Thesis (Phase-1)
0-0-24
0-0-6
12
03
ECL645
Fault Tolerant Systems
2-0-2
03
ECL647
Reconfigurable Computing
2-0-2
03
ECT607
Summer Industrial Training
ECL641
Advance Embedded System Design
Modular Courses
ECV531
ECV532
ECV543
33
Embedded Operating System
Device Drivers
Soft Skills
5 days a
week
(6 Weeks) 02
Bluetooth Technology
ECL649
Real Time Operating System
2-0-2
03
ECL651
Wireless Mobile Communication and
Its Applications
Data Compression
2-0-2
03
2-0-2
03
3-0-2
04
CSL653
L-T-P
C
Open Electives (OE)
5 days
(30 Hrs)
00
5 days
(30 Hrs)
00
5 days
(30 Hrs)
00
Open Elective
L-T-P
C
03
34
PE-4
3-0-0 (3)
CSL641
Programming
Course – 2
3-0-2 (4)
PE-3
3-0-0 (3)
Project &
Dissertation
CSD601
0-0-6 (3)
CSL504
Arch. of high.
Perform. Comp.
systems
3-0-2 (4)
PE-5
3-0-0 (3)
CSC602
Seminar-I
0-0-2 (1)
CSL502
Adv. Algo.
3-0-2 (4)
OE
3-0-0 (3)
CSD602
Major Project
and Thesis
0-0-24 (12)
III
IV
II
CSD502
Minor Project
0-0-4 (2)
Subject 5
Total Credits of the Programme:
PE-2
3-0-0 (3)
PE-1
3-0-0 (3)
CSL535
Data Structure
using C++
3-0-2 (4)
CSL501
Intro. to logic &
func. Progg.
3-0-2 (4)
I
Subject 4
Subject 3
Subject 2
Subject 1
Sem
88
CSL534
Programming
Course – 1
3-0-2 (4)
Subject 6
60
04
06
04
Lecture
Courses
0
09
15
12
L
Master of Technology in Computer Science & Engineering
0
0
0
T
26
10
12
04
P
26
19
27
16
Weekly
Contract
Hours
13
13
20
14
Credits
Master of Technology in Computer Science & Engineering
Department of Computer Science Engineering & Information Technology
Category
Program Core (PC)
Credits
Programme Elective (PE)
47
Program Core
Open Elective (OE)
Total Credits
3
60
12
L-T-P
C
Program Elective – II and III
C
3-0-0
3
CSL501
Introduction to Logic &
Functional Programming
3-0-2
4
CSL512
CSL514
Complexity Theory
3-0-0
3
CSL502
Advanced Algorithms
3-0-2
4
CSL515
Soft Computing
3-0-0
3
CSL504
Architecture of High Performance
Computer Systems
3-0-2
4
CSL516
Modeling & Simulation
3-0-0
3
CSL518
Embedded Systems
3-0-0
3
CSL534
Programming Course – 1
3-0-2
4
CSL520
System Level Design & Modeling
3-0-0
3
CSL535
Data Structure Using C++
3-0-2
4
CSL522
Formal Systems
3-0-0
3
CSL 641
Programming Course – 2
3-0-2
4
CSL524
Advanced Graph Theory
3-0-0
3
CSP 605
Lab Course – 1
0-0-2
1
Project
L-T-P
C
CSD501
Minor Project
0-0-4
2
CSD601
Project & Dissertation
0-0-6
3
CSD602
Major Project and Thesis
0-0-24
12
Seminar
CSC602
L-T-P
Seminar
Program Elective – I (Elective-I)
0-0-2
C
1
L-T-P
C
Approximation Algorithms
L-T-P
Program Elective – II (Elective-IV)
L-T-P C
CSL601
Ubiquitous Computing
3-0-0
3
CSL603
Machine Learning
3-0-0
3
CSL605
Real Time Systems
3-0-0
3
CSL607
Parallel & Distributed Algorithms
3-0-0
3
CSL609
Reconfigurable Computing
3-0-0
3
CSL611
Computer Vision
3-0-0
3
CSL613
Cryptography and Network Security
3-0-0
3
CSL615
Special topics in Parallel Computation
3-0-0
3
CSL511
Advanced Computer Network
3-0-0
3
SEL619
Embedded & Real time System
3-0-0
3
CSL513
Advanced Computer Graphics
3-0-0
3
SEL 627
Software Process Maturity
3-0-0
3
CSL517
Advanced Operating Systems
3-0-0
3
SEL 629
United S/W Configuration Management
3-0-0
3
CSL519
Advanced Microprocessor
3-0-0
3
SEL 631
E-Business
3-0-0
3
CSL521
Quantum Computing
3-0-0
3
SEL 633
Network Security
3-0-0
3
CSL523
Cluster & Grid Computing
3-0-0
3
SEL 635
Web Services
3-0-0
3
CSL530
Probability and Mathematical Statistics
3-0-0
3
SEL 637
Distributed Operating System
3-0-0
3
SEL525
Software Design, Construction & Testing
3-0-2
4
SEL 639
Human Interface Design
3-0-0
3
SEL 526
System Performance & Evaluation
3-0-0
3
& Data Mining
3-0-0
3
SEL528
Advanced DBMS
3-0-2
4
SEL 530
System Software
3-0-0
3
SEL 531
Object Oriented Analysis & Design
3-0-0
3
SEL 535
Data warehousing & Data Mining
2-0-2
3
SEL529
35
Software Systems for Data ware Housing
36
Project &
Dissertation
CSD601
0-0-6 (3)
PE-5
3-0-0 (3)
(Digital Forensics/
Security in
Distributed
System)
CSD602
Major Project
and Thesis
0-0-24 (12)
OE
3-0-0 (3)
CSL641
Programming
Course – 2
3-0-2 (4)
(Reserve Engineering
and Malware Analysis)
CSL534
Programming
Course – 1
3-0-2 (4)
(Secure Coding and
Software
Vulnerability Lab)
Subject 5
CSD502
Minor Project
0-0-4 (2)
Subject 6
0
09
14
11
L
0
0
0
T
26
08
12
06
P
26
17
26
17
Weekly
Contract
Hours
13
13
20
14
Credits
Selection Criteria for M. Tech CSE with specialization in Cyber security
The member of seats for M.Tech CSE with specialization in cyber security is limited (20 seats). These seats will be allotted on the basis of the merit of the programming
test conducted by ITMU. The programming test will include questions from C and Java.
60
CSC602
Seminar-I
0-0-2 (1)
PE-3
3-0-0 (3)
(Instrusion
Detection and
Prevention
System)
CSL504
Arch. of high.
Perform. Comp.
systems
3-0-2 (4)
CSL502
Adv. Algo.
3-0-2 (4)
PE-2
3-0-0 (3)
(Cyber
Serucity)
PE-1
3-0-0 (3)
(Applied
Cryptography
and Network
Security)
CSL535
Data Structure
using C++
3-0-2 (4)
CSL501
Intro. to logic &
func. Progg.
3-0-2 (4)
PE-4
2-0-0 (3)
(Risk Management
Policies and
principles)
Subject 4
Subject 3
Subject 2
Subject 1
Total Credits of the Programme:
IV
III
II
I
Sem
Master of Technology in Computer Science & Engineering (Specialization in Cyber Security)
About Specializations- M. Tech. Computer Science and Engineering
1.
In this program there are two options available with the students:
a. Either student can opt for M. Tech. in Computer Science and Engineering
b. Or he/she can opt for M. Tech. in Computer Science and Engineering (with specialization).
2.
If the student wants to get M. Tech. in Computer Science and engineering (with specialization), then
areas in which he/she can do specialization is Cyber Security.
3.
If the student is willing to do M. Tech. in Computer Science and l Engineering (without specialization),
then he/she is free to take all the three electives (Elective - 1, 2, 3) in third semester from any of the
stream and the student will be free to do Major Project in any of the stream pertaining to mechanical
engineering.
4.
If the student is willing to do M. Tech. in Computer Science and Engineering (with specialization), then
he/she will have to take all the three electives (Elective - 1, 2, 3) in third semester from the stream Cyber
Security mentioned above in which he/she is willing to pursue specialization. The student who opts for
the option of specialization will have to do Major Project in the same stream in which he/she is willing
to do specialization.
5.
If the student is willing to do M.Tech. in Computer Science and Engineering (with specialization) then
he/she will be issued a separate certificate of specialization on completion of the program along with
the degree of M. Tech. in Computer Science and Engineering.
M.Tech Computer Science and Engineering with specialization CYBER SECURITY
Department of CSE has introduced M.Tech Computer Science with specialization in Cyber Security. This
is a 60 credit, four semester programme, including a twelve credit thesis/project work. Students
admitted to this programme will be trained in the cyber security discipline, through a well-designed
combination of course-ware and its application on real-world scenarios. This course will build the
knowledge and skills about all aspects of cyber security, theoretical and practical. After this course
students will get great employment opportunities in this exciting marketplace.
Selection Criteria for M.Tech CSE with specialization in Cyber security
The member of seats for M.Tech CSE with specialization in cyber security is limited (20 seats). These
seats will be allotted on the basis of the merit of the programming test conducted by ITMU. The
programming test will include questions from C and Java.
37
38
I
MED610
Major Project
Part -2
(0-0-24)12
III
IV
Core course Credits :30
MED600
Major Project
Part -1
(0-0-8) 4
II
MEL500
Numerical
Methods and
Computer
Programming
(2-0-2) 3
MEL550
Advanced
Heat and Mass
Transfer
(2-0-2)3
Subject 1
Sem
Elective-1
(2-0-2) 3
Open Elective
(MTech level,
from other
Departments)
(2-0-2) 3
Elective Courses Credits : 12
MEC-620
Seminar
(0-0-4) 2
MEL570
Production
and Operation
Management
(2-0-2)3
MEL520
Advanced
Thermodynamics
(2-0-2)3
Subject 3
MEL560
Advanced
Machine
Design
(2-0-2) 3
MEL510
FEA
(2-0-2) 3
Subject 2
Elective-3
(2-0-2) 3
MEL590
Selected
Topics in
Mechanical
Engineering
(2-0-2) 3
MEL540
Mechatronics
(2-0-2) 3
Subject 5
0
8
10
10
L
0
0
0
0
T
Seminar Credits : 2
0
4
5
5
Lecture
Courses
Major Project Credits:16
Elective-2
(2-0-2) 3
MEL580
Advanced
Fluid
Dynamics
(2-0-2) 3
MEL530
Advanced
Manufacturing
Processes
and System
(2-0-2) 3
Subject 4
Department of Mechanical Engineering
28
16
10
10
P
14
16
15
15
Credits
Total Credits = 60
28
24
20
20
Weekly
Contract
Hours
Master of Technology in Mechanical Engineering (with an option of specialization)
39
Industrial Tribology
(MEL615MD)
Manufacturing Economics & Costing
(MEL617IP)
Enterprise Resource Planning
(MEL619IP)
Automotive System Design
(MEL615AE)
Automotive safety & sustainability
(MEL613AE)
Ergonomics and Work System Design
(MEL615IP)
Project Management (MEL613IP)
Instrumentation & Measurements in Thermal
Engg. (MEL625TH)
Vibration & Noise Engineering and Applications
(MEL625MD)
Statistical Quality Control (MEL627IP)
Vibration & Noise Engineering and Applications
(MEL625MD)
Vehicle dynamics (MEL623AE)
Design and Analysis of Flexible Manufacturing
System (MEL625IP)
Combustion Generated Pollution
(MEL623TH)
Vehicle Instrumentation and Testing
(MEL621AE)
Robotic systems & Automation for
Manufacturing (MEL623IP)
Design optimization Techniques
(MEL623MD)
Alternative Propulsion Technologies
(MEL619AE)
Simulation & Modeling of Manufacturing
Systems (MEL621IP)
Design of Thermal Systems (MEL619TH)
Design of I C Engine Systems (MEL621TH)
ELECTIVE- 3
(For Specialization in Automobile
Engineering)
ELECTIVE- 3
(For Specialization in Industrial &
Production Engineering)
ELECTIVE -3
(For Specialization in Thermal
Engineering)
ELECTIVE-3 for Specialization
Energy Audit and Management (MEL617TH)
Energy Conservation (MEL615TH)
Rotor dynamics (MEL621MD)
Advance Materials (MEL619MD)
ELECTIVE-3
(For Specialization in Mechanical
Engineering Design)
Composite Materials (MEL617MD)
Industrial Tribology (MEL615MD)
Combustion Engineering
(MEL613TH)
Automotive pollution and control
(MEL611AE)
Product Life cycle Management
(MEL611IP)
Renewable Energy Systems
(MEL611TH)
Theory of Plasticity (MEL611MD)
Experimental Stress Analysis
(MEL613MD)
Fleet Management (MEL-609-AE)
Concurrent Engineering (MEL609IP)
Modern Power Plants (MEL609TH)
ELECTIVE- 2
(For Specialization in Automobile
Engineering)
Fracture Mechanics
(MEL609MD)
ELECTIVE- 2
(For Specialization in Industrial &
Production Engineering)
ELECTIVE -2
(For Specialization in Thermal
Engineering)
ELECTIVE-2 for Specialization
Design for manufacturing & Assembly
(MEL603MD)
Advanced Refrigeration Engineering
(MEL607TH)
Automotive Chassis Engineering
(MEL607AE)
1Advances in Automotive electronics
(MEL605AE)
Micro & Nano Manufacturing
(MEL605IP)
Advanced Gas Dynamics (MEL605TH)
Advances in Automotive Engines (MEL-601-AE)
ELECTIVE-2
(For Specialization in Mechanical
Engineering Design)
Advanced Mechanics of Solids (MEL607MD)
Machine Tool Design (MEL605MD)
Cryogenic Systems (MEL603TH)
Design for manufacturing & Assembly
(MEL603MD)
CNC Technology and Programming
(MEL601IP)
ELECTIVE- 1
(For Specialization in Automobile
Engineering)
Advances in Transmission system
(MEL603AE)
Computational Fluid Dynamics and Heat
Transfer (MEL601TH)
Advance Design of Mechanical System
(MEL601MD)
ELECTIVE- 1
(For Specialization in Industrial &
Production Engineering)
MEMS Technology (MEL603IP)
ELECTIVE -1
(For Specialization in Thermal
Engineering)
ELECTIVE-1
(For Specialization in Mechanical
Engineering Design)
ELECTIVE-1 for Specialization
List of Elective Courses
About Specializations- M. Tech. Mechanical Engineering
1.
In this program there are two options available with the students:
a. Either student can opt for M. Tech. in Mechanical Engineering
b. Or he/she can opt for M. Tech. in Mechanical Engineering (with specialization).
2.
If the student wants to get M. Tech. in Mechanical engineering (with specialization), then areas in
which he/she can do specialization are as follows:
a.
Thermal Engineering
b.
Mechanical Engineering Design
c.
Industrial and Production Engineering
d.
Automobile Engineering
3.
If the student is willing to do M. Tech. in Mechanical Engineering (without specialization), then he/she
is free to take all the three electives (Elective - 1, 2, 3) in third semester from any of the stream and the
student will be free to do Major Project in any of the stream pertaining to mechanical engineering.
4.
If the student is willing to do M. Tech. in Mechanical Engineering (with specialization), then he/she
will have to take all the three electives (Elective - 1, 2, 3) in third semester from any one of the stream
mentioned above in which he/she is willing to pursue specialization. The student who opts for the
option of specialization will have to do Major Project in the same stream in which he/she is willing to
do specialization.
(E.g. – If the student is willing to do M. Tech. in Mechanical Engineering with specialization in
Mechanical Engineering Design, then the student will have to take Elective 1 - from any one of the
offered course mentioned in the column of Elective 1-for specialization in Mechanical Engineering
design, similarly Elective 2, Elective 3 will be also from offered course mentioned in the column of
Elective 2& Elective 3 -for specialization in Mechanical Engineering Design)
5.
40
If the student is willing to do M. Tech. in Mechanical Engineering (with specialization) then he/she will
be issued a separate certificate of specialization on completion of the program along with the degree
of M. Tech. in Mechanical Engineering.
41
IV
III
II
I
Sem
CEL603/605/607
Program Elective VI
2-0-2(3)
CED 601
Dissertation
Phase-I
0-0-12(6)
CED602
Dissertation
Phase-I
0-0-24(12)
CEL508/ 510/ 512/
Program Elective II
2-0-2(3)
CEL503
Foundation
Engineering
2-0-2(3)
CEL502/ 504/ 506
Program Elective I
2-0-2(3)
CEL501
Finite Element
Analysis
2-0-2(3)
CEL520/ 522/ 524
Program Elective
IV
2-0-2(3)
CEL514/ 516/ 518/
Program Elective
III
2-0-2(3)
CED534Minor Project
CEL507
Geoinformatics
Engineering
2-0-2(3)
CEL505
Advanced
Concrete
Technology
2-0-2(3)
CEL526/528/530
Program Elective
V
2-0-2(3)
CEL509
Urban and
Regional Transport
Planning
2-0-2(3)
TOTAL
CEC532
Seminar
0-2-0-(2)
CEL511
Construction
Planning Cost
Dynamics and
Management
2-0-2(3)
12
00
2
5
6
Lecture
Course
Master of Technology in Civil Engineering
Department of Civil & Environmental Engineering
00
2
26
00
2
00
T
00
00
10
12
L
68
24
14
10
12
P
94
24
16
22
24
Contact
Hour
per
Week
60
12
09
04
17
18
Credits
Master of Technology in Civil Engineering
Department of Civil & Environmental Engineering
Category
PC
42
Credits
PE
18
Programme Core (PC)
CEL501
CEL503
CEL505
CEL507
CEL509
CEL511
CEC532
CED534
CED601
CED602
Finite Element Analysis
Foundation Engineering
Advanced Concrete Technology
Geoinformatics Engineering
Urban and Regional Transport Planning
Construction Planning Cost Dynamics
and Management
Seminar
Minor Project
Dissertation Phase-I
Dissertation Phase-II
Total Credits
Programme Elective (PE)
PE I
PE II
PE III
PE IV
PE V
PE VI
42
CEL502
CEL508
CEL514
CEL520
CEL526
CEL603
STRUCTURAL ENGINEERING
Matrix Methods of Structural Analysis
Prestressed Concrete Structures
Design of Plates and Shells
Structural Safety and Reliability
Earthquake Analysis & Design
Civil Engineering Materials
Total
60
PE I
L-T-P
C
2-0-2
2-0-2
2-0-2
2-0-2
2-0-2
3
3
3
3
3
2-0-2
0-2-0
0-0-0
0-0-12
0-0-24
3
2
4
6
12
42
L-T-P
2-0-2
2-0-2
2-0-2
2-0-2
2-0-2
2-0-2
Total
C
3
3
3
3
3
3
18
PE II
PE III
PE IV
PE V
PE VI
PE I
PE II
PE III
PE IV
PE V
PE VI
CONSTRUCTION ENGINEERING AND MANAGEMENT
CEL504 Construction and Contract
Management
2-0-2
CEL510 Recent advances in Construction
Materials
2-0-2
CEL516 Construction Economics and Finance
2-0-2
CEL522 Quality And Safety in Construction
2-0-2
CEL528 Functional Planning, Building
Services and Maintenance
Management
2-0-2
CEL605 Excavation methods and Machinery
2-0-2
Total
ENVIRONMENTAL ENGINEERING AND MANAGEMENT
CEL506 Solid and Hazardous Waste
Management
2-0-2
CEL512 Advanced Waste Water Treatment
2-0-2
CEL518 Integrated Environmental Impact
Assessment
2-0-2
CEL524 Air Pollution and Control
2-0-2
CEL530 Environmental Geotechnology
2-0-2
CEL607 Environmental Modeling
2-0-2
Total
3
3
3
3
3
3
18
3
3
3
3
3
3
18
About Specializations- M. Tech. Civil Engineering
1.
2.
In this program there are two options available with the students:
a.
Either student can opt for M. Tech. in Civil Engineering
b.
Or the student can opt for M. Tech. in Civil Engineering (with specialization).
If the student wants to get M. Tech. in Civil Engineering (with specialization), then areas
in which he/she can do specialization are as follows:
a.
Structural Engineering
b.
Construction Engineering & Management
c.
Environmental Engineering
4.
If the student is willing to do M. Tech. in Civil Engineering (with specialization), then
he/she will have to take all the five electives (Elective - 1, 2, 3, 4, 5) in the second
semester from any one of the stream mentioned above in which he/she is willing to
pursue specialization. The student who opts for the option of specialization will have to
do Major Project in the same stream in which he/she is willing to do specialization.
5.
If the student is willing to do M. Tech. in Civil Engineering (with specialization) then
he/she will be issued a separate certificate of specialization from the department on
completion of the program along with the degree of M. Tech. in Civil Engineering.
43
44
APPLICATION FORM FOR ADMISSION TO
(To be filled by ITMU)
Receipt No _________
Date ____/____/_____
M.TECH PROGRAMMES FOR ACADEMIC SESSION 2015-2016
Established by the Haryana State Legislature under the Haryana Private Universities (Third Amendment)
Act, 2009 Recognized by UGC with a right to confer degrees u/s 22(1) of the UGC Act, 1956
And Included by UGC in their select list of approved Universities, available at www.ugc.ac.in
(ITM University, Gurgaon has no other Centers / Campus in India or Abroad)
Write NA wherever not applicable
All fields are mandatory
Programme Applied for M. Tech. in:
1st choice…………….……………….
2nd choice………….…………………
PASTE FIRMLY YOUR
3rd choice …………..………………..
RECENT COLOR
4th choice …………..………………..
OF GOOD QUALITY
PHOTOGRAPH
(SIZE 3.5 x 4.5 CMS)
Whether applying for Full Time
Part Time (Working Professionals)
(All columns need to be filled in Capital letters with black ball point pen only)
1.
Name of the Applicant (in English) : ...........................……………..................................................................................................................
Name of the Applicant (in Hindi): .……………………………………................................................................................................................
2.
Father's Name (in English): …………………………….....................................................(in Hindi) :...............................................................
3.
Mother’s Name (in English): ...........................................................................................(in Hindi) : ...............................................................
4.
Local Guardian if any (Delhi/NCR) Name: ..................................................................... Mobile No..............................................................
5. CORRESPONDENCE ADDRESS
6. PERMANENT ADDRESS
Address..............................................................................................
(Fill only if different from Correspondence Address)
...........................................................................................................
Address...............................................................................................
Town/City............................................................................................
.............................................................................................................
State....................................................... Pin Code.............................. Town/City.............................................................................................
Student Mobile No...............................................................................
State..................................................Pin Code....................................
Parents Mobile No................................................................................ Student Email ID ..................................................................................
Parents Email ID..................................................................................
Parents Email ID..................................................................................
Landline no. with STD Code.................................................................
Landline no. with STD Code.................................................................
6. Gender: Male
Female
Transgender
Nationality………………….…… Blood Group …………….
7. Date of Birth …………………………………………………………..………..……………
8. Domicile Details (Applicable for Haryana Resident students only, Tick one only)
(a)
Haryana General
(b) Haryana SC
9. Total Annual Family Income from all sources (Rs. In lacs.)………………
Father's Occupation: Self Employed
Govt. Job
Private Job
Farmer
Others
Mother's Occupation: Self Employed
Govt. Job
Private Job
Farmer
Others
10. How did you get information about ITM University, Gurgaon?
Newspaper
ITMU website
Current Student
of ITM
Counselor
For working professionals who desire to do the programme in six semesters (3 years)
45
Internet
Friend/
Relative
Alumni
Other
11. Designation………………………………………………………………………………………………………………......................................……….
12. Organization……………………………………………………………………........................................................................................................
13. Official Address…………………………………………………………………………………………………………………..
Office Phone No. …………………………………………………..
14. Highest Qualification (Highest Qualification on the basis of which admission is sought):
(a) B.E./B. Tech./MCA/ M.Sc. degree completed:
Qualifying
Degree
Examination
Passed
Name &
Address of
University
Discipline
Year
of
Passing
Whether the Qualifying Degree has been
obtained through Full/ Part-time/
distance mode
(Please mention clearly)
%age of
Marks/
CGPA
(b) B.E./ B. Tech./ MCA/ M.Sc. (For candidates awaiting the final result of the qualifying degree, the admission will be provisional and at the
time of provisional admission, the candidates should have cleared all the courses upto the pre final semester).
Qualifying
Degree
Examination
Passed
Name &
Address of
University
Discipline
Year
of
Passing
Whether the Qualifying Degree has been
obtained through Full/ Part-time/
distance mode
(Please mention clearly)
%age of
Marks/
CGPA
15. Whether a valid GATE score holder? (If yes, mention the percentile score and discipline and Year):
GATE Percentile
Rank & Total number of candidates appeared
16. Have you ever been convicted for any Criminal Offence?
Discipline
Yes
Year
No
17. Is there any case pending against you before a Court/Police/ School/ University?
Yes
No
(If yes, provide full details on a separate sheet of paper)
18. DECLARATION BY THE PARENTS AND CANDIDATE
I, hereby declare that all the particulars stated in this Application Form are true to the best of my knowledge and belief. I also affirm that I have read in detail the Admission Policy &
Selection Procedure 2015 of ITM University including its fee structure and refund & cancellation policy before submitting this application and agree to unconditionally abide by the
same. I understand that the decision of the University is final with regard to my admission. I promise to abide by the rules and regulations of the University as existing and as would be
amended from time to time. If it is proved that I was admitted on false particular and / or documents provided by me or my antecedents prove that my continuance in this University is
not desirable, the University shall have the right to expel me from the University, besides being liable for legal action against me, at my cost. I agree that all disputes are subject to the
jurisdiction of the court at Gurgaon only. I also understand that a student from a University not recognized by AICTE/UGC/AIU/MHRD or any other statutory body of Government of
India shall not be eligible for admission.
Place: ____________________
Signature of the Applicant _____________________________
I have fully read the information furnished by my son/ daughter/ ward and affirm that it is true and correct. If any of the information or certificates provided to the University are false, I
shall abide by the actions and decisions taken by the University, including termination of his/her admission besides , liable for legal action at my cost. Under the circumstances, all
fees paid for whatsoever purpose shall stand fully forfeited. I have also read the contents of the declaration cum Undertaking signed by my son/daughter / ward and agree to abide by
the same.
Dated: ___________________
DATE:
46
Signature of the Parent (s) ___________________________
Signature of the Applicant_____________________________
LIST OF ENCLOSURES (Self Attested) TO BE SUBMITTED WITH
THE APPLICATION FORM AND PROCESSING FEE
1.
Copy of GATE Admit Card and valid GATE score card, if applicable.
2.
True copy of the statement of marks showing that the applicant has passed the qualifying examination.
In case, the result of the final semester examination has not been declared the admission to M. Tech.
course would be provisional, based on the marks obtained up to pre-final examination. However, proof
of having passed the qualifying examination is necessary and must be submitted on or before 17th July
2015. In such a case where the result has not been declared by the University, provisional admission
may be extended upto 15th September 2015 after which the admission will stand confirmed /
cancelled as the case may be. In the event, the Provisional Admission is cancelled due to non
compliance of the admission criteria; no refund of fee will be permissible. Students are cautioned to
accept provisional admission keeping this in mind.
3.
Two copies of recent, colored, good quality photographs, self-attested on front side and of size 3.5 cm X
4.5 cm (one copy to be fixed on the application form and the other copy to be attached with the form)
4.
The College Leaving Certificate signed by the Head of the Institution last attended by the student.
Alternatively, a good moral Character certificate may be submitted from his/her employer or a Class-I
Gazetted Officer.
5.
Domicile Certificate (only applicable to Haryana Residents – Form -2), if applicable.
6.
SC certificate (only applicable for Haryana SC Form -3), if applicable.
7.
Self-Declaration by the Student and Parent/ Guardian Form – 4.
8.
Copy of the Migration certificate, if passed the qualifying examination form the University other than
this University.
9.
Certificate of Medical Fitness from Registered Medical Practitioner.
10.
Copy of NOC from the employer, in case applying for part-time M. Tech. course
(All documents must be self-attested by the student. ‘By Post’ indicates Registered Post or by speed post only.)
47
FORM-1
DECLARATION CUM UNDERTAKING
I have read and understood that ITM University, Gurgaon has been established by the Haryana State Legislature under The
Haryana Private Universities (Third amendment) Act, 2009 and ITM University is a Private Self Financed University recognized
by UGC and has the right to confer degrees under Section 22(1) of the UGC Act, 1956. ITM University has been included by UGC
in their select list of approved Universities. This list of recognized Universities can be obtained from the UGC website
www.ugc.ac.in
I have clearly understood that the functions of Admission, Course Design, Curriculum Structures, Teaching Methodologies,
Examinations/ Evaluation System (Internal and External) and all other issues related thereto including but not limited to the
credit/ grading system, promotion system etc etc. shall be performed entirely by the university in accordance with the
guidelines prescribed in the Statute/ Ordinances as approved by ITM University from time to time.
I hereby agree and undertake that if admitted, my child / ward shall abide by all the rules and regulations of ITM- University from
time to time including but not limited to attendance, course work, Internal / External Examination and evaluation, matters of
discipline, timely payment of fee etc. etc.
I understand that my admission to ITM University if at all, is provisional and subject to confirmation by Chancellor.
I hereby affirm that the information furnished in the Application Form is true and no material information has been concealed. If
any information is found to be false, incorrect or misleading, ITM University shall have the authority to cancel my
candidature/admission without any further enquiry or notice. Under the circumstances, all fee paid for whatsoever purpose shall
stand fully forfeited.
I understand and agree that Ragging and/or Smoking within the premises of the University and/or its hostels is illegal and
strictly prohibited. I understand that the University has a ZERO Tolerance policy for indulging in any such act and that, if I am
found engaging in any such act(s) or any other unlawful act(s) directly or indirectly, besides Police/Legal Action against me, I
shall be expelled from the University. In such an event my fee shall also be forfeited.
I also affirm that I have read in detail the Admission Policy & Selection Procedure 2015 of ITM University, Gurgaon including its
fee structure and the refund and cancellation policy before submitting this application and agree to unconditionally abide by the
same.
I have clearly understood the refund and cancellation policy of the University and the financial impact of a mid-course
withdrawal on an unaided self financed University like ITM. Therefore, in the event my child withdraws his/her admission after
the last date of withdrawal clearly specified in the Admission Policy and Selection Procedure or mid-course before the
completion of the course, I agree to pay the balance years fee since the seat cannot be filled by the University mid-course and
shall therefore remain vacant, Being an unaided self financed University, I am aware that the University is entitled to claim the
said amounts in view of the Constitution Bench judgment of the Hon’ble Supreme Court of India in the case titled “Islamic
Academy of Education vs. State of Karnataka” bearing CWP No. 350 of 1993 as I am neither submitting a bond / bank guarantee.
This affidavit is in lieu of bond/bank guarantee as required by the said Supreme Court ruling.
I undertake to pay the university the fee as stated herein above on the basis of a written demand made by the university at my
aforesaid address and the same shall be a conclusive proof of the seat remaining unfilled at the university after the withdrawal of
admission by my child.
That the demand for the balance year’s fee by the university shall be final and acceptable to me and I undertake not to object /
express surprise on the same and undertake to pay the same within the period stated in the demand letter. In case I fail to do so,
besides withholding my no dues clearance/migration/character certificates, the University shall be entitled to take legal
recourse to recover the same at my risk and peril as to costs and consequences.
That the contents of this undertaking have been read over and explained to me in vernacular and I am executing the same after
understanding the contents thereof.
SIGNATURE OF PARENT/GUARDIAN
SIGNATURE OF APPLICANT
Date
Date
Place
Place
48
FORM – 2
HARYANA RESIDENT CERTIFICATE
(For bonafide Residents of Haryana only)
Certified that Sh./Km. ____________________________________________ son/daughter of
Sh./Smt. ___________________________________________________________________________
R/o___________________________________________________________________________________
______________________________________________________________ (complete address) since
____________________________________________ and applicant for admission to Engineering/
Technical Courses at ITM, University Gurgaon, Haryana, is a bonafide resident of Haryana State
in terms of Chief Secretary, Haryana letter No. 62/17/95 – 6GSI dated 3.10.96, letter No.
62/32/2000 – 6GSI dated 23.05.2003, letter No. 62/27/2003/6 GSI dated 29.7.2003, letter
No. 22/28/2003 – 3GS – III dated 30.1.2004.
No. ___________________
(Signature of the attesting authority)
Date : _________________
Name ___________________________
Place: _________________
Designation ______________________
(with legible office seal)
NOTE :
i)
The competent authorities to issue Haryana Resident Certificate will be as per State Govt.
letter No. 22/28/2003 – 3 GS – III dated 30.01.2004.
ii)
The candidates, who have passed their qualifying examinations from the Universities /
Board / Institutes located in Haryana, are not required to produce Certificate of Haryana
Resident.
iii)
The certificate must have been issued on or after 31.01.2005.
49
FORM – 3
HARYANA SCHEDULED CASTE CERTIFICATE
Certified that Sh./Km.__________________________________________________ son/daughter of
Sh./Smt. _____________________________________________________ R/o____________________
_______________________________________________________________________________________
_________________________ (complete address) belongs to _________________ ________________
Caste which has been notified as Scheduled Caste by the Haryana Government.
This certificate is being issued to him/her according to the Haryana Govt. circular Letter No.
333(I) – 97, dated 25-2-97, No. 22/28/2003 – 3 GS – III dated 30.01.2004 and letter dated
21-6-2004.
No. ___________________
(Signature of the issuing authority)
Date : _________________
Name ___________________________
Place: _________________
Designation ______________________
(with legible office seal)
50
FORM-4
SELF DECLARATION BY THE STUDENT
1)
I, .............................................................................................................(full name
of student with admission/registration/enrolment number) S/o, D/o
Mr./Mrs./Ms....................................................................................... having been
admitted to............................................................................... (Name of the
institution) have carefully read “THE HARYANA PROHIBITION OF RAGGING IN
EDUCATIONAL INSTITUION ORDINANCE, 2012” and fully understood the provisions
contained in the said Ordinance.
2)
I have, in particular, perused clause 2(f) of the Ordinance and am aware as to what
constitutes ragging.
3)
I have also, in particular, perused clause 8 of the Ordinance and I am fully aware of the
penal and administrative action that is liable to be taken against me in case I am found
guilty of or abetting ragging, actively or passively, or being part of a conspiracy to
promote ragging.
4)
I hereby solemnly aver and undertake that:
a)
I will not indulge in any behavior or act that may be constituted as ragging under the
ordinance.
b)
I will not participate in or abet or propagate through any act of commission or omission
that may be constituted as ragging under the ordinance.
5)
I hereby affirm that, if found guilty of ragging, I am liable for punishment according to the
Ordinance, without prejudice to any other criminal action that may be taken against me
under any penal law or any law for the time being in force.
6)
I hereby declare that I have not been expelled or debarred from admission in any
institution in the country on account of being found guilty or, abetting or being part of a
conspiracy to promote, ragging; and further affirm that, in case the declaration is found
to be untrue, I am aware that my admission is liable to be cancelled.
Declared this......................day of...........month of .............year.
...........................................
Signature of Student
51
FORM-4 (Contd..)
SELF-DECLARATION BY PARENT/GUARDIAN
1.
2.
3.
4.
5.
6.
Mr. Mrs./ Ms................................................................................................. (full
n a m e o f p a r e n t / g u a r d i a n ) fa t h e r/m o t h e r/g u a r d i a n o f
.................................................................... (full name of student with University Roll
Number), having been admitted to .................................................................. (name of
the institution) have carefully read “THE HARYANA PROHIBITION OF RAGGING IN
EDUCATIONAL INSTITUTION ORDINANCE, 2012” and fully understood the provisions
contained in the said Ordinance.
I have, in particular, perused clause 2(f) of the Ordinance and am aware as to what
constitutes ragging.
I have also, in particular, perused clause 8 of the Ordinance and am fully aware of the
penal and administrative action that is liable to be taken against my ward in case he/she is
found guilty of or abetting ragging, actively or passively, or being part of a conspiracy to
promote ragging.
I hereby solemnly aver and undertaken that:
(a)
My ward will not indulge in any behavior or act that may be constituted as ragging
under the Ordinance.
(b)
My ward will not participate in or abet or propagate through any act of commission
or omission that may be constituted as ragging under the Ordinance.
I hereby affirm that, if found guilty of ragging, my ward is liable for punishment according
to the Ordinance, without prejudice to any other criminal action that may be taken
against my ward under any penal law or any law for the time being in force.
I hereby declare that my ward has not been expelled or debarred from admission in any
institution in the country on account of being found guilty of, abetting or being part of
conspiracy to promote, ragging; and further affirm that, in case the declaration is found
to Declared this .................day of................. month of .................. year.
............................................
Signature of Parent/Guardian
Name:
Address
Telephone/Mobile No. :
Email ID
52
FORM- 5
AFFIDAVIT
(Only for authorizing parent in lieu of student to receive refund after withdrawal of
Admission)
(To be executed only on leaving, by the student, on a stamp paper of Rs.10 duly
attested by a First Class Magistrate or Notary Public)
(For authorizing parent in lieu of student to receive refund after withdrawal of Admission)
(To be executed by the student on a stamp paper of `10 duly attested by a First Class Magistrate
or Notary Public)
I, ______________________, D/O,S/O __________________ aged about ___________ years R/O
_____________________, do hereby solemnly affirm and declare as under:
1.
That the deponent had appeared in the B. Tech. or equivalent or M. Sc. or MCA having Roll
No. __________ and got admission at ITM University in M. Tech. (____________).
2.
That the deponent has withdrawn his/her admission from the University and as per the
refund policy of the University, I am entitled to the refund of fees after deducting `
__________________, since the admission has been withdrawn before the last date of
withdrawal. Since I do not have a bank A/c therefore the cheque towards refund of fees
may be issued in the name of my father/mother, Mr./Mrs.________________.
3.
I accept and acknowledge that neither me nor my parents shall have any right or claim
subsisting against ITM University, its Management or its employees after the refund of
fees in name of my father/mother instead of my name from the University.
4.
I state that I have read over and understood the rules of the University and have executed
an Undertaking/Declaration on my own free will and consent and without any force, fraud
and coercion. Similarly, my parent/s have also executed an undertaking which is also
acceptable to me.
DEPONENT
VERIFICATION:
Verified at (______________) on this_______________day of (___________) 2015 that the
contents of paras 1 to 4 of the above affidavit are true and correct to my knowledge and no
part of it is false and nothing has been concealed there from.
DEPONENT
53
IMPORTANT DATES
S. No.
Actions
Dates
1
Uploading of Admission Policy and Selection Procedure
01.05.2015
2
Applications available online/Downloaded forms on the ITM University,
Gurgaon website www.itmindia.edu
01.05.2015
3
Application Forms available at the Campus (Offline Mode)
01.05.2015
4
Last date for submission of Application Forms with Processing Fee and
required documents by any mode, online, offline or by post
19.06.2015
5
Display of first admission cum merit list on the University website
www.itmindia.edu and at the campus
24.06.2015
6
Last date for payment of first semester fees for students offered admission
in the first list
02.7.2015
7
Online display of second admission cum merit list
07.07.2015
8
Last date for payment of first semester fees for students offered admission
in the second list
14.07.2015
9
Last date for withdrawal of admission with refund
17.07.2015
10
Last date for submission of mark sheets and result of qualifying degree with
minimum eligible marks by candidates offered provisional admissions
17.7.2015
11
Commencement of academic session
27.07.2015
12
13
54
Admission against vacant or dropout seats, if any, based on merit on firstcum-first-served basis for seats remaining unfilled/ dropouts after the last
date of withdrawal of admission.*
Last date of admission for any unfilled seats
17.07.2015
to
25.08.2015
25.08.2015
Mentors of ITM University
Dr C R Prasad
BE, MBA, DSc (Honoris Causa),
FNAE, FIE, FIME, MAIMA
Chairman & Managing Director
Everest Power Private Limited.
Former Chairman & Managing
Director of Gas
Authority of India Ltd.
Mr Harbans Lal Bajaj
BSc, MSc FNAE, FIE, FIET,
FIEEE, FAIMA
Independent Director, PTC Ltd.
Formerly: Appellate Tribunal for
Electricity; Chairman,
Central Electricity Authority &
ex-officio Secretary Govt. of India
Prof. Prem Vrat
BTech. (Hons.), MTech
IIT Kharagpur
PhD-IIT Delhi
Doctor of Engineering
(Honoris Causa)
FNAE, FNASc.,
FWAPS, FISTE, FIIIE
Dr Karmeshu
Prof. Kasturi Lal Chopra
PhD, MSc, BSc (Hons)
Padmashree
Professor, School of Computer
BSc (Hons), MSc, PhD
FNA, FASc, FNASc, FNAE, DSc(hc) & Systems Sciences,
Jawaharlal Nehru University,
Former Director, IIT Kharagpur
New Delhi
SS Bhatnagar Awardee
SS Bhatnagar Awardee
Prof. Kehar Singh
Ex-Dean & Emeritus Fellow,
IIT Delhi
SS Bhatnagar Awardee
Prof. M S Sodha
Padmashree
BSc, MSc, DPhil, FNA
Former Vice Chancellor –
Barkatulla University,
Bhopal, Devi Ahilya University,
Indore & Lucknow Universities,
Lucknow
SS Bhatnagar Awardee
Prof. Mohan Lal Kothari
BTech, MTech, PhD
Emeritus Fellow, Department of
Electrical Engineering, IIT Delhi
Prof. Indira K Varma
MSc, DPhil, PhD, DSc,
Glasgow University
Honorary Doctorate Degree
Dr P K Swamee
BE (Civil); ME (Hydraulic Eng.),
PhD, University of Roorkee
Dr Rajesh Chadha
Honorary Distinguished
Research Professor,
Senior Fellow-National Council
of Applied Economic Research
Prof. Surendra Kumar Kaushik
FNAE; PhD (Engg.)
FIE (India)
AICTE-INAE Distinguished Professor.
Formerly Professor and Head,
Dept. of Civil Engineering,
IIT Roorkee
Mr Ved Prakash Sandlas
BSc (Hons) Physics,
B Tech (Hons)
Electronics & Electrical
Communication Engineering
(IIT Kharagpur) FNAE, FIETE
Formerly of ISRO and Chief
Controller R&D, DRDO
Dr Yogendra Pal Anand
PhD
FNAE, MSESI, FIPWE,
FIRT, FIIBE, FIEI
Dr Surendra Pal
BSc– PCM, MSc - Physics,
MSc (Technology) –
Electronics; PhD President,
Institute of Electronics and
Telecommunication Engineers (IETE),
Sr Advisor, ICT Ahmedabad University,
Distinguished Visiting Professor
INAE India and IEEE USA
Prof. K M Mital
BSc, BE (Mech),
ME (Prod.),
PhD in Industrial Engineering
and Management
Prof. Satya Sheel
B Engg. (EE);,M Engg. (ECS);
PhD (Systems & Electrical Engineering)
SMIEEE, FIE, LMISTE
Former Professor, EEE &
Instrumentation Engg.,
MN National Institute of
Technology, Allahabad.
Prof. BC Nakra
BSc Engg. (Mech);
MTech, IIT Kharagpur
PhD and DIC (London),
Imperial College of Science
and Technology,
FNA,FNAE, FASc, FIE, FASI
Prof. B K Das
BTech (IIT Kharagpur),
MS (Illinois), PhD (Illinois)
FNASc, FMAS
Formerly Dean-RDIL,
ITM University, Gurgaon
ITM University
HUDA Sector 23A, Gurgaon 122017 India
For M. Tech, All Admission related queries :
Chairman, M. Tech Admission Committee, School of Engineering & Technology
Mobile : 08447964584, 09582213588 & 09999840290
For Online queries : 9999000118, 0124-4195264
For General queries : Tel : 0124-2365811-13, 4195200
Helpline : 8800221162
Email: mtechadmission2015@itmindia.edu
web: www.itmindia.edu
ITM University is the registered trademark for ITM University Gurgaon
vide Trade Mark Application no. 1944837 dated 1st April, 2010
While every effort has been made to ensure that the information contained in this document is accurate at the
time of publication (April 2015), all matters that it covers may be subject to change without prior notice. The
University does not intend, by the publication of this document, to create any contractual or other legal relation
with the students, their advisors or any other persons. ITM University, Gurgaon reserves the exclusive right to
change or withdraw, without prior notice, any statement in this document.