1. No category

RELEASE NOTES
IUCLID VERSION 5.6.0.2
IUCLID 5.6.0.2 – release notes
March 2015
Contents
IUCLID 5.6.0.2 .......................................................................................................................................................... 4
Software requirements ....................................................................................................................................... 4
Improvements / new features ............................................................................................................................ 4
Fixes .................................................................................................................................................................... 4
IUCLID 5.6.0.1 .......................................................................................................................................................... 6
Fixes .................................................................................................................................................................... 6
IUCLID 5.6.0 ............................................................................................................................................................. 7
Improvements / new features ............................................................................................................................ 7
Fixes .................................................................................................................................................................... 7
IUCLID 5.5.1 ............................................................................................................................................................. 9
Improvements / new features ............................................................................................................................ 9
Fixes .................................................................................................................................................................. 11
IUCLID 5.5.0 ........................................................................................................................................................... 12
IUCLID 5.4.1 ........................................................................................................................................................... 13
Improvements / new features .......................................................................................................................... 13
Fixes .................................................................................................................................................................. 13
IUCLID 5.4.0 ........................................................................................................................................................... 14
Improvements / new features .......................................................................................................................... 14
Fixes .................................................................................................................................................................. 15
IUCLID 5.3.2 ........................................................................................................................................................... 16
Improvements / new features .......................................................................................................................... 16
Fixes .................................................................................................................................................................. 16
IUCLID 5.3.1 ........................................................................................................................................................... 17
Improvements / new features .......................................................................................................................... 17
Fixes .................................................................................................................................................................. 17
IUCLID 5.3.0 ........................................................................................................................................................... 17
Page 2 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.2.3 ........................................................................................................................................................... 19
IUCLID 5.2.2 ........................................................................................................................................................... 20
IUCLID 5.2.1 ........................................................................................................................................................... 21
Page 3 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.6.0.2
SOFTWARE REQUIREMENTS
In addition to the list of improvements and fixes included in IUCLID 5.6.0.2, the list of supported softwares has
been updated. The latest information is available in the FAQ, on the IUCLID website:
http://iuclid.eu/index.php?fuseaction=home.faq&type=public#311
The main changes are listed below:
New supported softwares
Softwares not recommended
anymore
PostgreSQL 9.3
Java 6
Java 8
Tomcat 6
Oracle 12c
Tomcat 8
IMPROVEMENTS / NEW FEATURES
-
-
Update of label of BPR section names:
o '1.1 (Cf. 2.1) Name and address' instead of '1.1 (Cf. 2) Name and address'
o '1.2 (Cf. 2.1) Contact person' instead of '1.2 (Cf. 2) Contact person'
o Section 1.3 ‘Suppliers’ instead of 'Biocidal product manufacturer', for submission type ‘BPR
Basic information (mixture)’
Update of label of BPR section names for the submission types ‘BPR Basic information (substance)’
and ‘BPR Substance of concern’:
o Section 1.3 ‘Suppliers’ instead of ‘Active substance manufacturer’
o Section 2 'Identity of the substance' instead of 'Identity of the active substance'
o Section 2.8 'Method of manufacture (syntheses pathway) of the substance' instead of
’Method of manufacture (syntheses pathway) of active substance'
o Section 2.9 'Specification of purity of the substance as manufactured' instead of 'Specification
of purity of the active substance as manufactured'
o Section 2.12 (Cf. 2.1) 'The origin of the natural substance or the precursor(s) of the substance'
instead of 'The origin of the natural active substance or the precursor(s) of the active
substance'
o Section 3 'Physical and chemical properties' instead of 'Physical and chemical properties of
the active substance'
FIXES
-
Hyperlinks generated from a IUCLID documents are fixed so that the IUCLID application can be started
using the link.
Corrupted attachments in IUCLID files are now detected during import. They are also corrected when
possible, if not the error reported to the user indicates the location of the corrupted attachment.
Page 4 of 21
IUCLID 5.6.0.2 – release notes
-
March 2015
Records containing attachment can now be imported successfully via the IUCLID clipboard manager.
Better handling of memory usage during bulk export operations.
Remove the logged exception when the update flag is maintained in the configuration file.
Setting of the correct logging level (DEBUG) for the event ‘Session without associated queue’.
Detection and correction of corrupted IUCLID roles definition.
Content of tables in IUCLID can be copied.
Fix for an error occurring when opening a document under section 7.6 for a BPR dossier.
Fix for the document generation under section 11 for the submission type ‘REACH Application for
Authorisation’.
Page 5 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.6.0.1
FIXES
-
-
IUCLID dossiers or datasets containing a use defined in section 3.5, in the table ‘Article service life’,
defined using PROC 0 were not able to be imported back to IUCLID 5.6 when using a REACH dossier
template.
Performance issues are detected when several (around 100) records from section 3.7.1 are linked to
uses in section 3.5.
Page 6 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.6.0
IMPROVEMENTS / NEW FEATURES
-
-
-
-
Section changes
th
th
o Update of section 2.1 according to the 4 ATP of the CPL Regulation (4 version of the GHS).
o Section 14.1: validation has been added in order to ensure data consistency in the
information requested in an inquiry dossier.
Dossier content
o Section 3.7.1 is now marked as mandatory for ‘Application for Authorisation’ dossiers.
o Section 13 can now be included in PPORD notifications.
Compare dossier: there is now the possibility to retrieve a dossier for comparison using its UUID.
View mode in dataset: the latest view selected by the user to display the content of a dataset is kept
independently for a substance and for a mixture dataset.
Annotations: annotations added in a dossier can now be exported and imported to an updated
dossier. This allows the transfer of annotations to a revised version of the dossier. The complete
feature is described in the user manual.
Logging of export actions: export of dossiers can now be logged by the system (function inactivated by
default).
Help system / user manual updated to take into account the changes introduced in IUCLID 5.6.0.
Compatibility with Java 7 security policy is now fully implemented.
FIXES
-
-
Section changes
o Section 1.9: the name of the section is updated to ‘1.9 Product and process orientated
research and development’, now aligned with the REACH terminology. In the same way, for
PPORD updates, the term ‘prolongation of exemption period’ is replaced with ‘extension of
the exemption period’.
o Section 2.2: instead of the current entry "R48/23 - Harmful: danger of serious..." the wording
is now corrected to "R48/23 - Toxic: danger of serious damage to health by prolonged
exposure through inhalation".
o Section 3.5: the content of the field 'Exposure scenario reference in the CSR' is now refreshed
in section 3.5 after a link is made from an Exposure Scenario in section 3.7.1. It is also
possible to navigate from a use in section 3.5 to the linked Exposure Scenario in section 3.7.1.
o Section 3.5: ‘PROC 0’ is now added for the service life stage.
o Sections 3.7.1 and 3.10: validation error with long use names is now handled correctly.
o Section 3.7.1: the field ‘Release estimation method name’ is now always activated.
o Section 3.7.1: the first entry of the picklist of the field ‘Number of measured data’ is updated
from ‘5’ to ‘<5’.
o Section 2.3 for BPR (basic) mixture is now displaying the correct composition template.
Light dossiers
o Export of light dossiers: fix for a scenario when a user exports a light dossier based on a more
recent dossier.
o A light dossier can now be imported even if the base dossier is not available in the database
as long as all attachments are already available (in other dossiers or datasets).
Page 7 of 21
IUCLID 5.6.0.2 – release notes
-
-
-
-
-
March 2015
Performance issue when managing exposure scenarios in inherited templates has been fixed.
Chesar export filter:
o The endpoint summary ‘5.3.2 Biodegradation in soil’ is now added to the list of the
information included to the ‘Chesar input information’ template (for export/dossier creation).
o The export format for Chesar is now compatible with IUCLID 5.4.
Dossier creation
o The error when a BPR dossier is created based when a product component has no function
indicated is handled properly.
o A mixture included as component of a biocidal product is now displayed with the correct
table of content in a biocidal product dossier.
o Unnecessary endpoint summaries are not included by default to member dossiers anymore.
User management:
o Error when a duplicate user name is used is now handled correctly.
o Prompt to save changes is now only displayed when a user record has been updated.
Printing
o Fix the headers of section 13 for BPR dossiers.
o Biocidal product component names in section 2.3 of BPR dossiers are now printing correctly.
o Section 2 is now printing for ‘BPR active substance application’ and ‘BPR substance of
concern’.
Help System: restore the link to the help text from section 14.2.
Page 8 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.5.1
In addition to the list of improvements and fixes included in IUCLID 5.5.1, the list of supported softwares has
been updated. The latest information is available in the installation manuals and the FAQ. The main changes
are listed below:
New supported softwares
Softwares not supported anymore
Windows 8
Windows Vista
Windows server 2012
Windows server 2003
PostgreSQL 9.1 and 9.2
PostgreSQL 8.4
Linux CentOS
Oracle 10g
Apache Tomcat 5.5
IMPROVEMENTS / NEW FEATURES







Annotations
o A new operations right can be assigned to roles and users: the possibility to export
annotations
o Annotations to be exported from a dossier can now be selected individually from the export
assistant
List of literature references (export and print)
o Now available for mixtures and dossiers based on mixtures
o The list includes, in addition, the endpoint study record name and UUID
IUCLID User Manual and integrated Help System updated
The user of a distributed IUCLID version can now open several clients connected to the same server,
from the same workstation. This setting can be activated in the IUCLID user preferences
Legal entities exported from IUCLID 5.5.1 are compatible with IUCLID 5.4
Creation of a new dossier template for Chesar that allows the selection of relevant IUCLID information
to be imported in Chesar
Dossiers
o Application for authorisation: when a dossier is based on a category, all member datasets of
the category contain the information needed for this dossier type (i.e. sections 3.5, 3.10 and
13)
o The status of the following IUCLID sections has been updated:
 Section 3.7 in REACH registration templates
 Section 10.2.4, 10.2.5 and 10.2.6 for BPR Substance of concern
 Section 10.1.5 for BPR Active substance application
Page 9 of 21
IUCLID 5.6.0.2 – release notes



March 2015
Light dossiers
o Improved import error message indicating the details of the missing attachment (documents
UUIDs, file name and size)
o The option to export light dossier is not available anymore for REACH or CLP dossiers
o The export rights for the Light dossiers are now inherited from the main export rights
Modifications of labels
o Biocidal Products Regulation (BPR) section 7.4 name is now ‘7.4 (Cf. 7.1) User e.g. industrial,
trained professional, professional or general public (non-professional)’
o Biocidal Products Regulation (BPR) section 2.3 name is now ‘2.3 Biocidal product
composition’
o Label changes in section 8 of the BPR:
 AEL is now 'Acceptable Exposure Level' instead of 'Acceptable Exposure Limit'
 AEC is now 'Acceptable Exposure Concentration' instead of 'Acceptable External
Concentration'
o Correction of the dossier names displayed in the dossier creation wizard for BPR dossiers
o IUCLID section 3.7.2 correction of some labels
o Update of IUCLID terminology: Mixture/Product instead of Mixture
o ‘Biocidal product’ instead of ‘product’ in several BPR sections
o Several typos and character case corrections
Change of section numbering for the BPR sections:
o Section 12 renamed to 'Classification & Labelling' instead of 'Classification & Labelling and
PBT assessment'
o 'PBT assessment' moved to section 13.1, and displayed only for 'BPR Active substance
application'
o ‘Packaging’ is now section 12.3 (previously 12.4) and its name is ’12.3 Packaging (12.7 in
Annex III of BPR)’
Page 10 of 21
IUCLID 5.6.0.2 – release notes
March 2015
FIXES



Migration
o Incomplete migration of custom rules in IUCLID 5.5.0: this problem was likely to occur in the
databases where additional roles had been created using IUCLID 5.4 (or earlier versions) and
had been partially populated with endpoint access rights. The migration of these databases to
IUCLID 5.5.0 triggered errors in the user management functions
o During migration and restore, the default access right assigned for the new sections of IUCLID
is now correctly inherited from the import role: if import right is available, full rights are given
to the new sections, otherwise only read access is defined
o Verification and correction of the attachments meta information stored in the database (MD5
checksum) and during import
o Incorrect migration of the server announcements data
Server announcement function: fix of the number of characters allowed
Dossiers
o CLP alternative name request dossiers were not valid (could not be imported in IUCLID 5.5)
when Croatia was selected in the country picklist of section 14.2
o Sections 2.1 and 2.2 do not appear incorrectly anymore in the opt-out options for a REACH
registration intermediate member dossier
o Light dossiers can now be imported in Oracle databases
Page 11 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.5.0











A full compatibility is maintained for REACH information between IUCLID 5.4 and IUCLID 5.5
Dossier comparison is extended to the field level and additional functionality are available for
comparing two dossiers (easier dossier selection, comparison report)
13 OECD Harmonised Templates (OHTs) have been added covering nanomaterials-specific endpoints
o Section 4.24: Agglomeration/aggregation
o Section 4.25: Crystalline phase
o Section 4.26: Crystallite and grain size
o Section 4.27: Aspect ratio / shape
o Section 4.28: Specific surface area
o Section 4.29: Zeta potential
o Section 4.30: Surface chemistry
o Section 4.31: Dustiness
o Section 4.32: Porosity
o Section 4.33: Pour density
o Section 4.34: Photo catalytic activity
o Section 4.35: Radical formation potential
o Section 4.36: Catalytic activity
Light dossier export for biocides dossier in order to reduce the file size for dossier updates
Role management improvement (separation of rights between substance-related sections and flexible
part): access can now be granted to endpoint sections without granting the same access level to the
substance document
Open IUCLID document via hyperlink: for the user of the distributed version, hyperlinks can be
generated from a IUCLID document and shared with other users
Literature inventory improvements: literature references identified in a substance or dossier can be
exported or printed
Biocides functions
o New dossier types created to allow the submission of information according to the EU
Biocidal Product Regulation (active substance approval and product authorisation)
o New templates have been added to IUCLID section 14.3 to store biocides-specific
information:
 Section 14.3.1: Product composition
 Section 14.3.2: Technical characteristics of the biocidal product
 Section 14.3.3: Physical and chemical compatibility with other products
 Section 14.3.4: Intended uses and exposure
 Section 14.3.5: Likely tonnage to be placed on the market
 Section 14.3.6: Directions for use
 Section 14.3.7: Toxicological profile for humans and animals
 Section 14.3.8: Measures to protect humans, animals and the environment
 Section 14.3.9: Packaging
 Section 14.3.10: Summary and evaluation
Integration of OECD Harmonised Template 90: Emissions from preservative-treated wood (IUCLID
section 3.9.1)
Addition of a remark to record a folder description
Integrated Help System updated
Page 12 of 21
IUCLID 5.6.0.2 – release notes


March 2015
CLP alternative name request: addition of Croatia in the country list in section 14.2
Obsolete entries in the picklists are hidden when not selected
IUCLID 5.4.1
IMPROVEMENTS / NEW FEATURES










Allow export of all annotations from a substance
Inclusion of annotations contained in a substance dataset in the related dossier
Support of Java 7
Creation of links to section 3.5 from section 3.7.1 (from inherited templates)
Improvement of link deletion
Removal of the possibility to send an error report by email in the exception page (this function is
obsolete; all error reports must be sent to the IUCLID Helpdesk)
Implementation of context sensitive help for SupeUser "managing announcements" functionality
Possibility to require certificates for authentication (for distributed version only)
Change in a label in endpoint summary 5.4.2 (henry's law constant unit)
Update of the User Manual and the integrated Help System for:
o section 2.3: PBT assessment
o section 3.5: Life Cycle Description
o section 6 and 7: (Eco)Toxicological information summaries
FIXES







CSR plug-in issue on Linux servers (missing headers in the report)
Section 2.3 and 3.7.1 printing for full templates
Spelling mistakes in section 6
Truncated secured question
Irreversible user account expiry
Dossier export issues
Secured question answering for suspending users
Page 13 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.4.0
IMPROVEMENTS / NEW FEATURES






Section 2.3: PBT assessment outcome can now be managed
Section 14.2: New form available for Alternative Name Requests
Bulk user creation or update
Group of IUCLID documents using pre-defined and user-define folder structures
IUCLID dossiers
o Update of the template content for Application for Authorisation and Downstream User
Reports dossiers
o Application for authorisation, dossier header update
o Notification of Substance in Article, dossier header update
o Addition of a confidentiality claim on the registration number in the REACH registrations
dossier header
o Updated validation text in dossier creation wizard when template is for intermediates
Changes to IUCLID sections:
o Section 1.1: Multiple contact persons
o Section 1.1: Addition of a confidentiality flag for the linked reference substance
o Section 1.3: New identifiers added
o Section 2: Multiple compositions to be linked to C&L blocks in sections 2.1 and 2.2
o Section 2: Improvement of user interface to enter more easily a classification
o Section 2.2: Update of picklists
o Section 3.1: Addition of a field for 'Methods of article production'
o Section 3.2: Addition of the 'Tonnage directly exported'
o Section 3.3: Possibility to link sites with relevant uses specified in section 3.5
o Section 3.4: Renamed to 'Information on mixtures'. Information previously available for
articles is migrated to section 3.5 'Article service life'
o Section 3.5: Updated in order to describe the full life cycle (including manufacture and service
life) to enable a clear link to assessment. New fields added, for example: tonnage of the
substance for each use, range of sites, technical function of the substance assigned per use
o Section 3.6: Updated according to section 3.5
o Section 3.7: Former section 'Waste' replaced by 'Exposure Scenarios, exposure and risk
assessment'. The 'Waste' information is saved as a html file and attached to the substance
dataset during migration
o Section 3.7.1: New section to manage information on exposure scenarios and local
assessment. An Exposure Scenario can be created for each life cycle stage
o Section 3.7.2: New section for the environmental assessment from aggregated sources
(including regional assessment)
o Section 3.7.3: Generic exposure potential previously included in section 3.5
o Section 3.8: Former section 'Exposure estimates' replaced by 'Biocidal information' (former
section 3.9). The 'Exposure estimates' information is saved as a html file and attached to the
substance dataset during migration
o Section 3.9: Moved to section 3.8
o Section 3.10: Application for authorisation, indication of uses
o Section 3.10: Links to the uses from section 3.5
Page 14 of 21
IUCLID 5.6.0.2 – release notes
March 2015
o








Sections 4 to 7: In all Endpoint Study Records, a picklist for the form of the test material has
been added
o Section 4.5: mass-based distribution added to the picklist, test guidelines updated, Mass
Median Aerodynamic Diameter (MMAD) and Geometric Standard Deviation (GSD) fields
added
o Section 4.8: Update of the Test Guidelines and Type of Method picklists. Possibility to add
more than 10 datasets for water solubility
o Section 4.13: New fields available for 'Solid/Liquid: release of flammable gas in contact with
water'
o Section 5.1.1: Size of the field for the 'Degradation rate constant' increased
o Section 5.2.2: Biodegradation in water and sediment: simulation tests - water types
o Section 5.4.1: Addition of the log Koc value at the level of the Endpoint Summary
o Section 6: Update of the Ecotoxicological information summary (e.g. new PNECair)
o Section 6.2: Updated of the OECD Harmonised Templates for Sediment Toxicity
o Section 7: Update of the Toxicological information summary (e.g. new DNEL for eyes,
assessment factors)
o Section 7: Update of content of Endpoint Summaries (e.g. link to the key study)
o Section 7.1.1: Objective of Study and Test Guidelines picklists updated; fields to document
the outcome of the bioaccessibility testing added
o Section 7.2.2: Route of Administration picklist updated
o Section 7.3.1: Update of Test Guidelines and Test System picklists
o Section 7.3.2: Update of the Test Guidelines picklist
o Section 7.4.1: Update of the Test Guidelines picklist. Fields relevant for the LLNA method are
only displayed when this test method is selected
o Sections 7.5.1, 7.5.2, 7.5.3, 7.5.4, 7.9.1, 7.9.2: size of the field 'clinical signs and mortality'
increased
o Section 7.6.1: Multiple positive controls can be added to the same study summary
o Section 13: Addition of new report types
o Section 14: Creation of a new section 'Information requirements' containing specific form,
including the one for Inquiry information (section 14.1)
Template for the confidentiality claim justification
Search by dossier template (standard query function)
Export without modification history
Using mouse scroll in the User Interface
Storage of attachments in the database: only one copy of the same document is stored; duplicates are
removed
IUCLID user's folder can now be defined within the application
Increasing the size limits for an individual attachment (up to 512Mo)
Category matrix: all endpoints are displayed and the reliability score has been added
FIXES


When deleting an attachment, the raw content is not removed from the database
Dissemination Plug-in Version Check Fails
Page 15 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.3.2
IMPROVEMENTS / NEW FEATURES


A new administration tool to display announcement on the IUCLID User Interface
Enhancement of the password management system that includes:
o minimum password length
o maximum failed login attempts
o password expiration
o forced password change
o security question
o user account expiration
FIXES



Back-up functionality: fix for the password export problem
Dossier Comparison: fix for the comparison of Section 1.1
Fix for the dossier fields disappearing momentarily from the User Interface
Page 16 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.3.1
IMPROVEMENTS / NEW FEATURES




Enhancement of the backup function in IUCLID (possibility to backup specific information separately,
possibility to backup users passwords)
Highlight selected item in the Query results pane (the element currently opened for viewing or editing
now remains in bold in the list of documents available)
'Go to UUID' feature: a field has been added in the IUCLID task list in order to retrieve directly a
document using its UUID.
Multi-selection in the query result pane: in the query results panes, it is now possible to select
multiple entries in order to perform certain actions. The multi-selection is enabled by using Ctrl, Shift
keys or by select / unselect all option in the right-click menu. The following actions are allowed in case
more than one document is selected:
o print (in that case all documents selected are converted to html using the default options
and the complete template)
o delete
o export (with the default options and the complete template)
o only in the case of reference substances and legal entities: activate / inactivate all selected
FIXES






The built-in help system is now pointing to the correct user manual section for the Endpoint
Summaries
The 'Use Category' of section 3.5 is now migrated to the field 'Market sector by type of chemical
product'
The public name, available in section 1.1 of Substances and Mixtures, can now contain up to 2,000
characters (note on the compatibility between IUCLID 5.3.0 and 5.3.1: IUCLID 5.3.0 will not be able to
import files containing more than 255 characters in the public name field; in all the other cases, files
generated with IUCLID 5.3.1 can be imported in IUCLID 5.3.0)
The built-in backup feature of IUCLID can now be used in 'I5D' mode
IUCLID prevents the import of 'orphans' document. For example, if an Endpoint Study Record (ESR) is
imported alone (i.e. without its parent substance) and the parent substance does not exist already in
the database, the ESR is not imported at all. In that case, the import log is misleading as it mentions
that the import was successful. The import message has been modified to report axactly the outcome
of the operation performed by the user.
If 'Always' is selected during the import process, all documents to be imported are now selected by
default (in the case only one i5z file is imported).
IUCLID 5.3.0





Printing: Annotation on Endpoint Summaries are now printed
Enhance background job notification
Include spellchecker
Improve tree view
Unify import functionality and integrate EC import
Page 17 of 21
IUCLID 5.6.0.2 – release notes















March 2015
Update Java libraries used within IUCLID
CSR Plug-In redesign and rework
New dossier template "CLP alternative name request"
Query tool performance improvement
Section 2.1 - modifications for CLP Regulation, 2nd ATP
Default information included in dossier template for 'REACH Notification of substance in article'
New entry in section 1.3 picklist for regulatory programme identifiers
Enhancement of the management of attachments
Application for authorization: adaptation of the available template
Addition of flag for CLP Regulation
Review of picklists and labels
o Section 11: Guidance on safe use
o Section 4.18: Storage stability
o Section 4.20: pH
o Section 7.6.1: Genetic toxicity in vitro
o Sections 6.1.1, 6.1.3, 6.1.5, 6.1.6 and 6.1.8
o Sections 7.10.1, 7.10.2, 7.10.3 and 7.10.5
o Section 7.4.1: Skin sensitisation
o Section 7.3.1 and 7.3.2 --> New Phrase
o Section 7.6.1 Genetic toxicity in vitro, Phrases (Guidelines)
Rearrange Sections, Section number for 7.5
Some characters are not allowed to be specified when using the export function
New logic in the dossier creation wizard for registration templates
Update of the End User Manual for IUCLID 5.3
Page 18 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.2.3






Incorrect pointers to the raw data layer are created in a Dossier on a Category where the submitted
Substance contains referencing endpoints to the supporting Substances when the referenced
endpoints are filtered
"Reviewed by an assessor" flag in the dossier header is not saved into the database
Decrease amount of data access by indexer
Dossier specific information - Remarks and Document were not included in dossier templates
R_PPORD and R_CLP. Registration specific information should not be displayed for these dossier
templates
PicklistOpen fields does not give a warning message if 'Other:' value is too long
Include section 3.4 as optional in the intermediate templates
Page 19 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.2.2


Data compatibility between IUCLID 5.2.1 and 5.2.0 is not given
I5ContainerException may occur upon single import of large I5Z files
Page 20 of 21
IUCLID 5.6.0.2 – release notes
March 2015
IUCLID 5.2.1





















ArrayIndexOutOfBoundsException in BulkExport
Prevent attachments from being removed on manual ordering of repeatable blocks
Bulk Export, fix for the following scenario: add one substance, then add another two substances =>
exception
Bulk export: remove possibility to have duplicate documents in bulk export list
Fix: changing the substance chemical name also removes the sites linked in section 3.3
Confidentiality request in the dossier header can only be for change of tonnage band
Document reference description differ on clients with different locale settings
Enhancement of the REACH dossier headers for registration / joint submission
Enpoint study summary 5.4.1 - typos corrected
Fix: entering invalid data in section 5.2.1 possible
Fix: exception error in copying endpoints to clipboard
Import Wizard Dialog: status message on analysing i5z content
Fix: NullPointerException when cancelling an Import job while the import file is being analysed
Fix: NullPointerException on rename endpoint with F2 key
Fix: picklist other value deleted in tables for multi picklist components
Fix: problems with handlings of tables in HTML-Area
Query Tool plugin: edit query block window size needs to be adapted to the content
Fix: section 3.5 "service life field" - problem in dossier creation
Fix: sporadic NullPointerException in PluginMetadataServlet
Fix: the proxy settings were not considered when running a Java Web Start deployed client
The word 'Registration' is removed in 'Registration dossier specific information' in the dossier header
Page 21 of 21