1. technology and computing
2. hardware
3. computer networking
4. wireless technology

Window Treatments
35
Motorized Shades
Motorized Roller Shades
Worthington Distribution makes ordering
complete motorized shades easy
• Measure the opening (see below)
• Look on the chart to determine the base price for the fabric, tube and
installation brackets
• Choose any fascia or rail/sill options
• Choose a motor based on how the shade will be installed and controlled
• Choose a power option based on the motor selected
• All window treatments are custom-made and pre-paid
• Most orders ship within 2 weeks
Custom Roller Shades
• Worthington Distribution has teamed up with one
of the country’s largest fabricators to offer our
dealers exceptional custom shades
Ordering Complete Treatments
www.worthingtondistribution.com/shades
• Ordering sheets
• Presentations
• Larger Pricing Charts
• Links to fabrics
• Integration diagrams
Questions? E-mail shades@worthdist.com
Key questions when getting started
• Do you need a shade (pages 36-37), drape (page 38) or blind (page 38)?
• What type of power are you going to use (110 VAC, 24VDC, battery, solar)?
• Is this new construction or retrofit? Wireless communication or hardwired?
• What are the sizes of the treatments? How many treatments?
• How are you looking to control the window treatments?
• If this is being controlled by an automation system, do you need 2-way
communication? Do you need percentage control or is open/close sufficient?
Measuring for Motorized Roller Shades
There are 3 type of measurements for shades:
• Inside the frame: This approach is used
when the exterior walls feature 2x6
construction. Windows are mounted on the
exterior, leaving a pocket that is 4+ inches
deep, perfect for a shade. Measure the
width at the top, middle and bottom. Use
the narrowest width. When ordering,
request a deduction so the shade brackets
do not bind when installed. Any gap is
easily cured with shims.
Inside frame
On Molding
Surface mount
• Surface Mount: This approach is for when
the shade is going to be mounted on the
molding. Measure from molding edge to
molding edge. A deduction is not requested
when using a surface mount approach.
• Cloth Measurement: This approach is not
used often. Use cloth measurement when
the fabric must be a specific width and the
total bracket width is flexible. The fabricator
cuts the cloth to the exact dimensions and
then adds the motor and brackets. Total
width varies based on the motor type and
tube diameter.
• Measure the space to the closest 1/8”.
Always round down. Provide the height and
the narrowest width measurement. Always
use a metal measuring device for accuracy.
• Each treatment is cut on a completely automated
vacuum table that pulls the fabric to the table for
an accurate square cut every time
• To add and hem the weight bar, and RF welder
uses a shuttle system that enables the fabric
to be welded without handling the fabric thus
ensuring a perfect weld every time
• The final stop for each shade is the assembly
table and testing racks. Each shade must be
tested before it is packed for shipment.
• While testing, the aesthetic aspects of the shade
are reviewed for scratches, dirt and proper rolling.
Once a shade has been deemed perfect it will be
wrapped and then packaged for safe transfer.
Motorized Roller Shade Motor Options
• Power 110VAC: Motors feature the highest lifting
capacity of the 3 power options offered in the
Worthington Distribution shade program. While
the motors are more expensive, there are no
power supplies to add. We offer the Somfy
Sonesse (quiet series) motors which are available
with contact closure, ILT (can be converted to
RS-485, Z-Wave or ZigBee), or 1 way RTS
wireless. The 110VAC motor uses wider tubes
than low voltage; however, they feature very
consistent speeds regardless of wire length.
• Power 24VDC: The most popular motor offering
for the low voltage contractor. Shades start at
only 24” and typically run up to 96” wide. The
24VDC motors are typically pre-wired with 18
(100’) ,16 (150’), or 14 (200’) gauge wire. When
multiple shades are pre-wired for the same room
it is recommended to keep the wire lengths equal
so the motors will run at a similar speed. We
offer the Somfy Sonesse (quiet series) motors
which are available with contact closure, RS-485
(compatible with Z-Wave or ZigBee) , or 1-way
RTS wireless.
• Power 12VDC: The most economical and flexible
motor. This motor can be run on a plug-in power
supply or it can be 100% wireless. Battery
options include Lithium AA’s, or a solar recharging
system with a 5 year guarantee. Control is with
1-way RTS wireless. Shade sizes vary based on
length but are up to 96” on a 72” long treatment.
All window treatment control solutions are custom-designed based on application.
1-866-542-0470 (Fax)
1-800-282-8864 (Phone)
Call us at (800) 282-8864 or email shades@worthdist.com for pre-sales support.
www.worthdist.com
sales@worthdist.com
We offer competitive pricing for any job, so contact us for a free quote.
Window Treatments
36
Motorized Shades
Ordering Complete Motorized Shade
Maximum Height Of Shade (Inches)
Maximum Width Of Shade (Inches)
84"
96"
108"
120"
132"
144"
Rails:
pair
111
132
149
165
186
246
265
38
122
144
162
181
201
264
281
43
133
157
176
197
216
281
297
49
119
145
170
188
209
230
295
315
54
124
157
184
205
227
243
311
332
59
130
165
193
216
240
257
325
348
65
135
173
203
227
254
270
340
365
70
132
142
180
211
239
265
285
352
381
76
137
149
186
219
251
275
300
370
397
81
138
150
162
193
228
260
287
313
386
444
86
151
163
176
200
238
270
300
327
402
432
92
147
162
174
186
216
254
289
324
356
432
464
103
158
176
188
200
230
270
302
351
383
462
497
113
159
177
194
212
230
265
305
321
375
410
494
529
124
147
170
188
205
223
240
278
327
340
400
440
524
562
135
154
177
200
220
240
262
284
321
367
408
448
489
575
618
146
162
186
211
232
254
275
297
335
389
429
473
516
605
651
157
24"
30"
36"
42"
48"
54"
36"
54
62
70
77
84
89
95
42"
58
66
75
82
89
97
104
48"
62
70
78
86
95
104
113
54"
65
74
83
92
101
110
60"
68
77
86
97
108
116
66"
71
81
91
102
113
122
72"
73
84
95
107
119
127
78"
76
87
99
110
122
84"
78
90
103
114
125
90"
83
97
112
125
96"
92
107
122
136
108"
100
116
132
120"
108
124
140
132"
116
138
144"
124
156"
168"
Motors
White: All Motors
60"
72"
Grey: ST-30 (24VDC) & Sonesse 50 (110VAC)
Black: Sonesse 50 (110VAC):
Sill: each
14
16
19
22
24
27
30
35
41
46
51
57
62
68
4” Fascia
24
27
30
32
35
38
41
46
51
57
62
68
73
78
4” Head
82
91
100
109
118
128
137
155
173
191
210
228
246
264
5½” Head
108
118
128
138
148
157
167
177
197
226
246
266
285
305
Cassette
38
42
46
50
54
59
63
71
80
88
96
105
113
121
• Base Price:
Using the chart to the left, find the
height and width of the treatment
you will be ordering. Round up to
the next height / width. Note the
available fabrics listed at the bottom
of the chart.
• Choose a motor (below):
Motor type is chosen based on the
power available and control options
LT-30: A 12VDC motor controlled by
Somfy 1-Way RTS Wireless
ST-30: A quiet 24VDC motor
controlled by Somfy 1-Way RTS
Wireless, RS-485, or contact closure
Sonesse 50: A quiet 110VAC motor
controlled by Somfy 1-Way RTS
Wireless, RS-485 (converted ILT), or
contact closure
• Choose a power solution:
See the next page for pre-wire
suggestions.
12VDC: Plug-in power supply,
battery, or solar charged batteries
24VDC: Plug-in power supply, power
and data distribution cabinets
110VAC: Outlet at the motor, Cat 5 to
a Power/Control Distribution Board
• Pricing example:
• Opening measurement 47”W x 73”L
• 24VDC power RTS (1 shade)
• Rails and Sills, no fascia
• Base Price
$122
• Rails($76) + Sill ($22) $98
• Motor (ST-30RTS)
$297
• Plug-in power supply
$43
Total:
$560
• Shipping: Not included
• Pricing is for Alkenz 3000 NET: 1%, 3%, 5%, 10% with a Lifetime fabric warranty
• Alkenz colors can be viewed at http://www.rollease.com/alkenz/sunshadow3300.html.
• Pricing is for Mermet E screen: 3%, 5%, 10%; M screen: 3%, 5%; Vienne 10%; Geneva Twilight: Blackout
• Mermet colors can be viewed at http://www.mermetusa.com.
• Pricing is for Phifer SheerWeave 2000,2100,2360,2390,2410,2703,2705,4000,4500,4550,4700,7500 fabrics
• Phifer SheerWeave colors can be viewed at http://www.phifer.com/.
• Other premium Phifer SheerWeave fabrics are available: 7000 blackout fabric (base price above times 1.45),
5000 blackout fabric (base price above times 1.35), 4600 and 4650 fabrics (base price above times 1.15)
• Add controls (next page):
• Fascia is powder coated and available in Aluminum, White, Tan, and Brown
• RTS remote
$53
• The 4” and 5½” head pockets are 3-sided boxes for installation rough-ins. Use 4” for ST-30 and 5½” for Sonesse 50
• Shipping is not included, power and control options sold separately
• Other motors and shade sizes are
• Sonesse 50 (110VAC) treatments must be at least 36” wide
available, give us a call for a quote
Add a Motor to the Base Price (Not Sold Seperately)
Motor
Power
Control
Base Pricing Chart
Price
Limit Setting Accessories
LT-30
12VDC
RTS Wireless
White
$193
ST-30DCT
24VDC
Contact Closure
White and Grey
$267
SOM9014599
Limit tool for ST-30DCT and RS485 motors
28.84
ST-30RTS
24VDC
RTS Wireless
White and Grey
$297
SOM9014793
Cable for use with SOM9014599
15.16
ST-30RS485
24VDC
RS-485
White and Grey
$327
Sonesse 50 RTS
Sonesse 50 ILT
110VAC
110VAC
RTS Wireless
ILT, Contact Closure
White, Grey and Black
White, Grey and Black
$459
$513
Sonesse 30 (ST-30) DCT and RS-485 Limit Setting
Sonesse 50 ILT Limit Setting
SOM9050280 ILT motor limit tool (no cable needed)
72.10
Note: RTS Motor limits are set with an RTS remote (next page)
24VDC Motor Power Solutions (Sonesse ST-30)
Complete 24VDC Power and Communication Solutions
Ala Cart 24VDC Power and Distribution
SOM1870196
Complete 5 motor enclosure: power and data
734.71
SOM1822209
24VDC 1.25A Wall Mount Plug-in PS (1 motor)
SOM1870192
Complete 10 motor enclosure: power and data
1105.51
SOM9011994
24VDC 5A Din Rail Power Supply
215.83
SOM1870197
Complete 15 motor enclosure: power and data
1431.67
SOM9011995
24VDC 10A Din Rail Power Supply
350.34
SOM1870198 Complete 20 motor enclosure: power and data
1706.32
Great choice for large jobs. Installation is quick and professional
SOM1870193
Low voltage Power and Data Board - 5 motors
78.96
SOM1870194
Low voltage Power and Data Board - 10 motors
109.86
1-800-282-8864 (Phone)
www.worthdist.com
44.15
1-866-542-0470 (Fax)
sales@worthdist.com
Window Treatments
37
Accessories
Power Solutions for 12VDC Motors (LT-30 and SOM1000678 Tilt Motor for Blinds)
Rechargeable Battery Solutions - Guaranteed 5 Year Life
SOM9015575
Solar Pack: solar panel, rechargeable battery, Y cable and mount
56.65
SOM9015624
SOM9015781
Replacement rechargeable battery for the solar pack
Pre-installation AC charger - required for solar applications - 24hr charge
39.79
65.73
SOM9014020
12VDC Reloadable Battery Tube (Batteries not included)
SOM9014834
SOM9015580
SOM1822192
8 AA Lithium Battery Package (for battery tube #9014020)
12VDC Reloadable battery tube harness (used to connect 2 single tubes)
12VDC Plug-in Power Supply with 25 ft. cable (white)
SOM1822192
12VDC Plug-in Power Supply with 25 ft. cable (white)
Lithium Battery Solutions - Typically 1 Year Life
Solar Powered Shades and Blinds
27.91
37.03
2.27
106.48
Convert Battery to a Plug-In Transformer
Hardwired Shade Motorization Pre-Wire
110VAC ILT Pre-Wire
106.48
Control Options
HAI Integration - Somfy Digital Network (RS-485 and ILT)
24VDC ST-30 Pre-Wire
Somfy ILT and RS-485 Programming
SOM485KIT
USB/RS-485 PC adapter, cable, instructions
75.00
Plug into the ILT tap or a power distribution board
The Somfy Digital Network RS-485 programming software is free
www.somfy.us, click ‘configuration software’, download ‘ILT2-ST30’
The software reads motor addresses, creates groups, and changes speed
SOM1810828 SDN wall switch, use for testing, mount by HAI
86.05
Cat 5
16/2 (150’)
14/2 (200’)
14/2 + Gnd
Cat 5 to an
ILT Interface
(30’ limit)
SOM9014573
• Cable location:
• 24VDC: Wire can come through the wall close
to the motor location. Be certain to leave room
for the brackets. Only one power feed per run.
• 110VAC: 14/2 can go to a box near the motor.
Traditionally a cornice is installed to cover the
outlet (see picture).
• Still deciding?: Use 110VAC ILT wiring, it can
work with RS-485 motors
• Communication
• RS-485 (24VDC): Cat 5 is traditionally homerun
• ILT (110VAC): Cat 5 to a 4 port ILT interface (30’)
• Contact Closure: Cat 5 homerun, 1 per motor
Z-Wave and ZigBee Adapters
Convert any Somfy RS-485
or ILT motor to Z-Wave or
ZigBee HA. For RTS motors, use the Z-Wave to RTS
plug-in interface.
SOM1870171
SOM1870226
SOM1870171
Add Z-Wave to an RS-485 or ILT motor
164.80
SOM1870202
Plug-in Z-Wave to RTS Wireless interface
334.79
SOM1870226
Add ZigBee HA Profile to an RS-485 or ILT motor
160.00
SOM1810632
1-channel Telis Pure
SOM1810633
5-channel Telis Pure
71.04
SOM1811081
16-channel Telis Pure
135.96
Somfy RTS Remote Controls
54.73
Worthington offers the entire Somfy line of RTS
transmitters. Please call for additional options SOM1810633 SOM1810632
RTS Integration and Control
SOM1810872
SOMHAICBL
16-channel universal RTS (URTSII) interface.
Integrates IR or RS-485 to RTS. Use with HAI
6’ cable, connects an HAI with the URTSII
SOM1810493
RTS Transmitter with Dry Contact inputs
HAI10A07
4 relay board: Use 3 relays per SOM1810493
SOM1810791
RTS Repeater (only 1 per installation)
405.82
9.99
69.34
37.97
184.13
RJ-45 Splitter to install the SDN wall switch
10.16
HAI offers support for Somfy RS-485 and ILT motors.
The integration is 2-way and there is support for both
direct motor control as well as group commands.
Somfy ILT Motor Communication Interfaces
SOM1870127
ILT Tap - 1 Required at the HAI panel
61.69
SOM1822111
12VDC 1A Power supply for the ILT Tap
19.51
SOM1870154
4 Port ILT Interface - Wire within 30’ of the motor
56.93
One of each part above is required when using ILT motors.
Multiple ILT interfaces can be used and interconnected via Cat 5 wire.
SOM9012345 ILT contact closure splitter and break out box 16.27
Use to control an ILT motor via contact closure
Contact Closure Integration:
When using an ILT or ST-30 DCT for contact closure control,
only one motor can be connected to each relay. Use a
SOM9012345 for contact closure control of an ILT motor.
HAI Integration - RTS Wireless
• The best Somfy integration with HAI is the Somfy Digital
Network (RS-485 and ILT); however, the most popular
integration is RTS (Radio Technology Somfy)
• RTS is available in all Somfy motor classes including
roller shades, drapery, and blinds
• Handheld and wall mount RF remotes offer a large
number of installation and control options
• A repeater can be added in larger applications
• Integration with HAI is easy via contact closure or RS-485
• Order the SOMHAICBL cable and SOM1810872 (URTSII)
• Turn the URTSII jumper to 1 and clone an RTS handheld remote channel
repeat for additional RTS channels. Test with the up/down/stop buttons.
• Set the dial to position 1 (address 1 on the RS485 network)
• Set the HAI serial port jumper to RS-485 (not RS-232)
• Set the serial mode to ProLink (not Somfy)
• Send messages from the HAI to the URTSII
• Messages UR CH DIR
• UR = Address: 01 to 16 (2 digits)
• CH = Channel: 01 to 16 (2 digits)
• DIR = Direction: U = Up D = Down S = Stop (Must be capital letters)
• Examples: URTSII 1, Channel 1 UP; send 0101U
URTSII 3, Channel 12 DOWN: send 0312D
All window treatment control solutions are custom-designed based on application.
1-866-542-0470 (Fax)
1-800-282-8864 (Phone)
Call us at (800) 282-8864 or email shades@worthdist.com for pre-sales support.
www.worthdist.com
sales@worthdist.com
We offer competitive pricing for any job, so contact us for a free quote.
Window Treatments
38
Motorized Blinds and Drapery
2” Blind RTS Enabled Tilt Motor Retrofit
Retrofitting 2” blinds with a tilt
motor is an easy process
• Order a SOM1000678 motor
• The motor will tilt up to 30lbs.
• Look at the main shaft in the
headrail of the blind. Choose
a matching adapter (below).
If the shaft is 1/4” square, no
adapter is needed
• Choose a battery, plug-in or
solar power solution (above)
• The headrail must be between 1.5” and 2 1/4” high
• Order the correct headrail adapter
• Choose RTS controls
Motor and Headrail Adapter and Remotes
SOM1000678
Tilt Motor, 12VDC, lift up to 30 lbs., Black
SOM9014529
Headrail Adapter for 2” x 2 1/4” Headrail
115.00
SOM9014528
Low Profile Adapter for 1.5” x 2 1/4” Headrail
SOM1810765
Telis 5 Channel RTS Remote for Tilt Motors - Pure
137.00
SOM1810974
Telis 1 Channel RTS Remote for Tilt Motors - Pure
99.90
6.03
6.03
Tilt Motor and 9014528
Headrail Adapter
Optional Shaft Adapters
SOM9014535
5.6mm Hexagonal Adapter
1.46
SOM9014536
D Rod Adapter
1.46
SOM9014540
4mm Square Adapter
1.46
9014535
9014540
9014536
If the blind uses a 1/4” x 1/4” square shaft,
no adapter is required
Motorized Drapery - Glydea
Maximum Width
5’
6’
7’
8’
9’
10’
Pinch Pleat: Center - 3 carriers/ft
645
661
675
692
709
Brackets Needed
3
11’
12’
13’
743
758
780
4
14’
15’
16’
795
815
831
5
17’
18’
864
883
900
6
19’
7
935
Pinch Pleat: Side - 3 carriers/ft
639
654
668
686
703
737
752
774
788
809
825
858
877
894
929
RippleFold 80%: Center - 5 carriers/ft
675
697
717
740
763
803
824
852
873
899
921
960
985
1,008
1,049
RippleFold 80%: Side - 5 carriers/ft
669
690
710
734
757
797
818
846
866
893
914
954
979
1,002
1,043
RippleFold 100%: Center - 6 carriers/ft
684
707
729
753
779
820
843
873
895
923
946
987
1,014
1,039
1,082
1,076
RippleFold 100%: Side - 6 carriers/ft
678
701
722
747
772
814
837
867
889
917
940
981
1,008
1,033
RippleFold 120%: Center - 7 carriers/ft
692
717
741
767
794
837
862
893
917
947
972
1,015
1,043
1,070
1,114
RippleFold 120%: Side - 7 carriers/ft
686
711
735
761
788
831
856
887
911
941
966
1,009
1,037
1,064
1,108
Pricing above is for a Somfy Glydea 60 motorized drape motor with carriers and track. Control is via contact closure. Shipping and brackets are not included.
All lengths 108” and longer will be broken down for shipping and will need to be reassembled on site (instructions included).
The Glydea drapery system is available to 36’ long. In addition, curved tracks are available. Call for pricing on tracks not listed above.
Motor Upgrade options
RTS Wireless - $74.16
RS-485 - $84.24
• Extremely quiet drapery system (<44dBA)
• Integrated power supply, just plug into 110VAC
• Touch Motion: Pull the fabric, the motor begins to move
• The Glydea 60 motor can pull up to 132 lbs./19.6 ft of fabric
• Reversible mount allows the motor side to be changed in the field
ZWave Wireless - Call
• Pricing example:
• Rod Length 98”
• Center draw, pinch pleat
• Single wall brackets
• RTS Controls
SOM1780907
ZigBee HA Pro - $156
• Rod
$709
• RTS Receiver
$74.16
• Brackets (4)
$31.80
Total:
$814.96
• Controls and shipping sold separately
SOM1780906
SOM1782054
SOM1782053
Glydea Drapery Motor Accessories
Drapery Bracket Options - Not Included in Pricing Above
SOM1780907
One Touch Ceiling Bracket
2.60
SOM1780906
Swivel Ceiling Bracket: less rod/ceiling light gap
1.23
SOM1782054
4.5” - 6” Adjustable Wall or Ceiling Bracket Kit
7.95
SOM1782053
8.75” - 10.25” Double Wall Mount Bracket Kit
11.79
SOM9154205
IR receiver for the Glydea motor
39.15
SOM1870133
IR remote - use with the 9154205 IR receiver
26.79
SOM9014599
DCT limit setting tool. Use with RS-485 and
contact closure applications
Cable for the DCT limit setting tool
28.84
SOM9013346
8.23
Determining Motorized Drapery Rod Length
Opening
38”
44”
50”
58”
62”
68’
75”
81”
87”
94”
100”
106”
Stack
26”
28”
30”
32”
34”
36”
37”
38”
41”
42”
44”
46”
Rod
54”
72”
80”
88”
98”
104”
112”
120”
128”
136”
144”
152”
Stack
1-800-282-8864 (Phone)
www.worthdist.com
Rod Length
Original Opening
• The chart is for standard pinch pleat drapes
• Start by measuring the opening
• The stack column estimates the amount of
area the fabric will need when it bunches up
• To allow the entire opening to be visible when
the drapery is open the rod length should equal
the opening width plus the stack width
• When the rod length is too short, the drapery
may block part of the opening when open
Opening
112”
119”
126”
131”
137”
144”
150”
156”
162”
169”
175”
181”
Stack
48”
49”
51”
53”
55”
57”
58”
60”
62”
63”
65”
67”
Rod
160”
168”
176”
184”
192”
200”
208”
218”
224”
232”
240”
248”
1-866-542-0470 (Fax)
sales@worthdist.com