OBEX Steel Modular End Terminal MT T50 Obex Systems is a leading provider of Vehicle Containment Systems and Noise Barrier Solutions for a Global Market. OBEX Modular Terminal MT T50 OBEX Modular Terminal MT T50 complies with prEN1317 part 7 and is formed with steel components to resist the head on impact of vehicles over a minimum barrier length. OBEX MT T50 is a fully upright terminal that withstands vehicle impact by compression of its unique energy absorbing steel cellular sections and the tension resistance of anchored steel wire rope. Steel sections are to grade S275 and S235, galvanised to EN 1461 and connected with grade 8.8 bolts. The barrier system is to be installed by trained and certified OBEX installers in accordance with the OBEX installation manual. OBEX MT T50 is suitable for connection to both 2-Wave and 3-Wave corrugated beam guardrail systems in addition to other safety fence configuration. The OBEX Modular Terminal design concept is unique, innovative and covered with a Patent Pending application (UK No. 1421308.6). Terminal Elevation www.obexsystems.com Notes: 1. OBEX MT T50 relies on the anchorage of steel posts into soil. Soil should be granular and well compacted with posts installed using a hydraulic post driving machine. Soil parameters proposed for use with OBEX MT T50 can be reviewed by the OBEX Technical Department where necessary. 2. OBEX MT T50 is designed for guardrail to connect to the side of the steel plate through pre-drilled holes at the junction. The OBEX Technical Department can also provide non-standard/ bespoke connections to guardrail where required. Front Elevation Performance Performance Level Acceleration Severity Index "ASI" Permanent Displacement Zone Exit Box Classification Test Specification A S 0,5 Z2 TT 2.1.50 Dimensions Height (above ground) 840 mm Overall Width 325 mm Overall Length 1635 mm Post Centres Terminal Plan T50 1.4 m OBEX Modular Terminal MT T50 Patent Pending (UK No. 1421308.6) Containment Level prEN1317-7 Vehicle Impact Test Test Impact Approach Speed (km/h) Results Vehicle Lateral Exit Box Mass (t) Displacement Classification ASI Zone T50 TT 2.1.50 50 Head on nose 0.9 1/4 offset to roadside www.obexsystems.com Obex Systems Ltd Unit 232, Blanchardstown Corporate Park 2 Blanchardstown, Dublin 15, Ireland. T: +353 (0)1 866 5151 E: info@obexsystems.com www.obexsystems.com S 0,5 Z2 A
© Copyright 2024