1. No category

PL-TP01 - 30/55/70/80W
WEATHER PROOF SERIES
Description:
PrimeLED Weather Proof is an advanced linear LED
design, with low glare diffused lens and a 230
degree beam angle. With an IP65 rating, and IK10
impact rating. The PrimeLED weather proof range is
designed for harsh enviroments.
Electrical Specification:
•Input Voltage: AC100-277V/50-60Hz
•Input Current: 0.55A Max
•Power: 30W/55W/70W/80W
•lifespan: 50,000 Hours
•Materials: Aluminium alloy and PC
•Use Enviroment: 20C - 45C
•Protection against electric shock: Level 1
Patented
CRI
>80
Ik10
650℃
Glow-Wire
5
Application:
•Warehouse
•Workshops
•Carparks
•Refrigerator
•Freezer
•Security
•Lighting
Specifications (By Order):
Model
CCT
Colour
LED
Quantity
Beam
Angle
Volatage
(V DC)
Power(W)
Length(mm)
PL-TP-30-CW
5500k
White
252
2835 SMD
LED
2750
230o
100-277
30
603*106
PL-TP-30-NW
4000k
Natural
White
252
2835 SMD
LED
2750
230o
100-277
30
603*106
PL-TP-55-CW
5000k
White
420
2835 SMD
LED
5100
230o
100-277
55
55
1003*105
PL-TP-55-NW
4000k
Natural
White
420
2835 SMD
LED
4990
230o
100-277
55
1003*105
PL-TP-70-CW
5000k
White
480
2835 SMD
LED
6910
230o
100-277
70
1203*105
PL-TP-70-NW
4000k
Natural
White
480
2835 SMD
LED
6840
230o
100-277
70
1203*105
PL-TP-80-CW
4000k
White
600
2835 SMD
LED
7580
230o
100-277
80
55
1503*105
PL-TP-80-NW
4000k
Natural
White
600
2835 SMD
LED
7600
230o
100-277
80
1503*105
PrimeLED Australia
Warehouse / Showroom
LED Type Lumens
Unit 2, 99-101 Western Ave Westmeadows VIC 3049
1300 533 000 (1300 LED 000) info@primeled.com.au
www.primeled.com.au
3
Years warranty
Dimension drawing (unit:mm/inch):
603/1003/1203/150
106
4.17"
72
2.83"
Installation Information:
1. First set up accessories and fittings of the light.
2. Cut off the power before installation.
3. Make sure the product is fixed tightly to the installation surface
(Install it according to diagram below).
4. Connect the wire of the light tot he power supply, then switch on the power.
Intallation Method I
Size:(mm)
55mm
580mm
1. Drill 4 holes of 8mm diameter.
screw
2. Install the holder on the wall,
be attention that the direction
should be the same.
3. Turning the screw but not tightly,
leave 3-4mm space.
4. Install the light and tighten the screw.
Intallation Method II
Size:(mm)
604
Screw
1.Drill 4 holes of 6.5mm.
2. Install the clip onto the wall.
3. Use screws to conenct the hanging
ring with screw holes on both sides of
the lamp.
4. Adjust the height of the wires of both
sides.
Safety Information:
Important Safety Instructions
1. Turn off the main power supply prior to installation.
2. The light fitting must be installed by a licensed electrial contractor or electrician.
3. If there is any visible damage on power cord or the shell of the product, it should not be used.
Cleaning and Maintenance
Turn off the power supply. Clean the Ceiling Light with soft cloth using a mild liquid cleaner. Dry with a cloth.
PrimeLED Australia
Warehouse / Showroom
Unit 2, 99-101 Western Ave Westmeadows VIC 3049
1300 533 000 (1300 LED 000) info@primeled.com.au
www.primeled.com.au
3
Years warranty