Ga lax yO ne N a i l S y st e m Nail Tip Application Procedure Galaxy One is the next step in the acrylic nail evolution. Fast setting and primerless in four vibrant to subtle pink and white combinations! This is a new product, please read instructions carefully. Sanitise Always sanitise yourself and your client before starting any service. Scrape the skin membrane from the nail. Step 1: Etch Using the Black Skinnie File, etch the nail plate from North to South. Etching must scratch the nail surface (this procedure is not removing oil or the shine). Do not use a fine buffer to etch, the use of a buffer directly onto the natural nail will cause irreparable harm. It will remove the top layer of the nail and cause thinning. Step 2: Dust Remove all dust and debris from the nail plate using a nylon manicure brush. Step 3: Balance Use three squirts (or brush-ons) of Balance on each nail and allow to dry between. Balance will bring the pH level closer to the acrylic pH level and increase adhesion. Step 4: Fit Nail-tips Glue the tips onto all 10 fingers. Use a manicure stick to remove glue from the underside taking care that the nail tip is not lifted. Blend the ridge line until the natural and plastic surface match and then file and shape the nails. Roughen the surface slightly. Step 5: Apply the Product 17219 © Salons Group 2009 Before applying product, lightly moisten the nail plate with your monomer. This will increase adhesion. Use caution near the skin. Using a wet, NOT RUNNY consistency, apply white powder to the free-edge, pat to shape. Then apply a small ball of pink powder at the cuticle area. Pat into place and stroke downward to blend. Place second pink ball between the cuticle ball and the free edge and pat the two pink balls together, stroke to blend. Step 6: File Using the Brown Skinnie File, file the sides and free edge on all ten nails. Then shape the top surface being sure to smooth out the cuticle area. Next, use the Grey Skinnie File to smooth and finish. Step 7: Buff and Oil Buff the nails using a Terminator being sure to remove all scratches. Rehydrate your client’s cuticle using Galaxy Almond Oil. Next have your client scrub using a pre-sterilised nylon manicure brush to remove excess oil and debris. Step 8: Liquid Glass Apply 2 coats of Liquid Glass over a pink and white enhancement. Liquid Glass has UV inhibitors, a sunscreen for the nails to prevent yellowing. DO NOT use Liquid Glass as a base coat, or a top coat for Nail Polish. Step 9: Smudge-me-not Apply 2 coats of Smudge-Me-Not. A UV inhibiting topcoat to be applied over Liquid Glass to prevent stickiness caused by sunscreens, suntan lotions etc. Also a perfect quick dry topcoat for nail polish. Notes… The Galaxy N ails One Syste m is virtually prim erless. Primer can be used when pr eferred or nece ssary. Liquid Glass is the best to pcoat to use for finishing a pink and white enhancemen Liquid Glass t. contains UV in hibitors and ac like a sunscree ts n for nails. Not to be used as a base or topcoat for na il polish. Smudge-menot can be us ed to finish ov liquid glass or er nail polish, it is non-yellow and dries in un in g der 3 minutes . This is a protective co ating to preven t stickiness fro m sunscreen, hair products and perfume. Distributed by The Salons Group tel 1800-655-814 fax 07-5528-4424 New Zealand enquiries tel 0800 80 1237 galaxy@salonsgroup.com Best price ordering www.salonsgroup.com
© Copyright 2024