1. finance
2. accounting and auditing

geotextilemembranes.co.uk
..................we cover the earth
geotextilemembranes.co.uk
..................we cover the earth
Type ‘R’ Membrane
A pplications
R ailways
E arthworks, foundations
and retaining structures
Drainage systems
E rosion control
E N 13249 : 2005
E N 13250 : 2005
E N 13251 : 2005
E N 13252 : 2005
E N 13253 : 2005
R eservoirs and dams
C anals
Solid waste disposals
L iquid waste disposals
E N 13254 : 2005
E N 13255 : 2005
Tunnels and underground
structures
E N 13257 : 2005
E N 13265 : 2005
R oad construction and
other trafficked areas
E N 13256 : 2005
F iltr ation
F iltr ation + Separ ation
I ntended uses
+
Properties
T est Method
Unit
Mean V alue
T ensile Strength
E N ISO 10319
Dynamic Perforation
R esistance (C one Drop)
E N ISO 13433
mm
45
+5
R esistance to Static Puncture E N ISO 12236
kN
0.700
- 0.07
Opening Size
E N ISO 12956
µm
210
± 63
Water Permeability
E N ISO 11058
m/s
110 • 10-3
- 33 • 10-3
Durability
Oxydation R esistance
Chemical R esistance
Microbiological R esistance
MD
CMD
T olerances
kN/m
kN/m
5.0
5.0
- 0.65
- 0.65
T o be covered within 2 weeks after installation
Predicted to be durable for a minimum of 100 years in all natural soils.
MD
100 %
R etained strength
prE N ISO 13438
C MD 100 %
MD
100 %
R etained strength
E N 14030
C MD 100 %
MD
100 %
R etained strength
E N 12225
C MD 100 %
geotextilemembranes.co.uk
..................we cover the earth
FASTRACK G90
Standard Grade (SG) Woven Geotextile
FASTRACK SG 609 is one of the largest selling general purpose geotextiles in the
UK. Designed and manufactured to conform to the old Department of Transport
Highways Specification for road and earthworks separation. FASTRACK SG 609
provides a cost effective solution for separation, support, reinforcement and filtration
for the general building and domestic markets.
Applications for FASTRACK SG 609:
Separating/Strengthening layer under access
roads & areas of hard standing.
Separating / Reinforcing – layers under stone
foundation for new buildings
Erosion control – coastal defences
Mechanical Properties
Separating / Reinforcing – layers under new
roads, car parks & industrial areas.
Separation – granular fill from sub soils and
other fill types.
Test
Units
Tensile Strength – MD
EN ISO 10319
kN/m
17
Tensile Strength – XD
EN ISO 10319
Kn/m
11
Elongation at break - MD
EN ISO 10319
%
18
Elongation at break - XD
EN ISO 10319
%
14
CBR Puncture Resistance
EN ISO 12236
N
1500
Test
Units
FASTRACK SG 609
Hydraulic Properties
2
FASTRACK SG 609
Water-flow normal to the plane
EN ISO 11058
l/m .s
15
Characteristic Opening (pore) size
EN ISO 12956
µm
240
Test
Units
FASTRACK SG 609
EN 964/1
mm
0.40
EN 965
g/m
Physical Properties
Thickness under 2 kPa
Weight
Roll Size
m
2
78
4.5 x 100
geotextilemembranes.co.uk
..................we cover the earth
MULTITRACK NW RANGE
Thermally Bonded Nonwoven Geotextiles
Technical Data Sheet 1/2
Test
Units
NW6
NW7
NW8
NW9
NW10
NW12
NW13
NW15
NW16
NW18
Tensile Strength - MD
EN ISO 10319
kN/m
6.0
7.0
8.0
9.0
10.0
12.0
13.0
15.0
16.0
18.0
Tensile Strength - XD
EN ISO 10319
kN/m
6.0
7.0
8.0
9.0
10.0
12.0
13.0
15.0
16.0
18.0
Elongation at break - MD
EN ISO 10319
%
40.0
40.0
40.0
40.0
40.0
45.0
45.0
45.0
45.0
50.0
Elongation at break - XD
EN ISO 10319
%
40.0
45.0
45.0
45.0
45.0
50.0
50.0
50.0
50.0
50.0
CBR Puncture Resistance
EN ISO 12236
N
1 000
1 200
1 400
1 500
1 600
2 000
2 150
2 500
2 700
3 000
Dynamic Cone Drop
EN 918
mm
40.0
37.0
34.0
30.0
28.0
24.0
22.0
20.0
19.0
16.0
Protection Efficiency
WI 189066
N
48.0
56.0
65.0
77.0
90.0
124.0
137.0
158.0
181.0
210.0
Test
Units
NW6
NW7
NW8
NW9
NW10
NW12
NW13
NW15
NW16
NW18
Permeability
EN ISO 11058
m/s
Waterflow normal to the plane
EN ISO 11058
l/m².s
120
115
110
110
110
105
105
95
90
85
Waterflow in the plane
EN ISO 12958
m2/s
1 x 10-7
1 x 10-7
1 x 10-7
1 x 10-7
1 x 10-7
1 x 10-7
1 x 10-7
7 x 10-6
7 x 10-6
7 x 10-6
Characteristic Opening Size
EN ISO 12956
µm
140.0
135.0
130.0
120.0
115.0
110.0
110.0
100.0
90.0
80.0
Test
Units
NW6
NW7
NW8
NW9
NW10
NW12
NW13
NW15
NW16
NW18
EN 964/1
mm
0.80
0.90
1.00
1.10
1.20
1.30
1.40
1.45
1.55
1.60
80.0
85.0
100.0
110.0
120.0
145.0
160.0
175.0
200.0
210.0
Mechanical Properties
Hydraulic Properties
Physical Properties
Thickness under 2 kPa
Weight
EN 965
g/m
2
120 x 10-3 115 x 10-3 110 x 10-3 110 x 10-3 110 x 10-3 105 x 10-3 105 x 10-3 95 x 10-3
90 x 10-3 85 x 10-3
Roll width
cm
450
450
450
525
525
525
525
525
525
525
Roll length
m
200
200
200
200
200
200
200
100
100
100
Full load volume (+/- 10%)
m²
94 500
86 625
70 875
68 250
65 625
47 250
45 675
42 000
36 750
34 125
Roll diameter (+/- 10%)
cm
37
38
42
43
45
52
52
40
42
44
geotextilemembranes.co.uk
..................we cover the earth
MULTITRACK NW RANGE
Thermally Bonded Nonwoven Geotextiles
Technical Data Sheet 2/2
Test
Units
NW20
NW21
NW25
NW26
NW30
NW40
Tensile Strength - MD
EN ISO 10319
kN/m
20.0
21.0
25.0
26.0
30.0
40.0
Tensile Strength - XD
EN ISO 10319
kN/m
20.0
21.0
25.0
26.0
30.0
40.0
Elongation at break - MD
EN ISO 10319
%
50.0
50.0
50.0
50.0
50.0
55.0
Elongation at break - XD
EN ISO 10319
%
50.0
50.0
50.0
55.0
55.0
55.0
CBR Puncture Resistance
EN ISO 12236
N
3 400
3 500
4 000
4 350
5 100
6 500
Dynamic Cone Drop
EN 918
mm
15.0
14.0
11.0
11.0
9.0
5.0
Protection Efficiency
WI 189066
N
240
260
300
352
383
617
Test
Units
NW20
Mechanical Properties
Hydraulic Properties
-3
NW21
-3
NW25
-3
NW26
-3
NW30
-3
NW40
-3
Permeability
EN ISO 11058
m/s
80 x 10
80 x 10
55 x 10
50 x 10
45 x 10
35 x 10
Waterflow normal to the plane
EN ISO 11058
l/m².s
80
80
55
50
45
35
Waterflow in the plane
EN ISO 12958
m2/s
7 x 10
7 x 10
8 x 10
8 x 10
8,5 x 10
8,5 x 10
Characteristic Opening Size
EN ISO 12956
µm
70.0
70.0
70.0
70.0
70.0
70.0
Test
Units
NW20
NW21
NW25
NW26
NW30
NW40
EN 964/1
mm
1.70
1.85
2.00
2.10
2.30
3.00
EN 965
g/m 2
235.0
260.0
300.0
325.0
360.0
520.0
Roll width
cm
525
525
525
525
525
525
Roll length
m
100
100
100
100
100
100
Full load volume (+/- 10%)
m²
29 925
28 875
24 675
23 100
19 950
13 125
Roll diameter (+/- 10%)
cm
47
48
51
52
57
70
Physical Properties
Thickness under 2 kPa
Weight
-6
-6
-6
-6
-6
-6
geotextilemembranes.co.uk
..................we cover the earth
Ground grid-root protection
GroundGrid® ground stabilization system is a
geotextile grid used for ground stabilization
in landscape and construction projects. Simply
expand the three-dimensional honeycomb structure,
place it on your project surface and fill with gravel,
soil, sand or other mineral infill to create a strong
and stable surface.
USES
• Lawn areas
• Parking lots
• Driveways
• Walkways
• Golf course paths
• Sporting fields
BENEFITS
• Ground stabilization — prevents infill from spreading under load
• Helps resist ground rutting
• Allows water penetration, both vertically and horizontally
• Durable, yet flexible, material conforms to any terrain
• Lightweight and compact for easy storage and transport
PRODUCT DETAILS
• 3-D, honeycomb pattern structure made from spunbond
polypropylene fabric
• Expands to cover 4' x 25' (108 sq. ft.)
• Cell dimensions: 55 mm x 50 mm or 110 mm x 50 mm
Ecogrid Securagrid
Properties
Ecogrid Securagrid
40/40
60/60
20/20
30/30
4.75 x 50
or 100
4.75 x 50
or 100
PP
PP
PP
PP
long./ transv DIN EN ISO 10319
>20 / >20
>30 / >30
>40 / >40
>60 / >60
long./ transv DIN EN ISO 10319
<8/<8
<8/<8
<8/<8
<8/<8
long./ transv DIN EN ISO 10319
8/8
12 / 12
16 / 16
22 / 22
long./ transv DIN EN ISO 10319
16 / 16
24 / 24
32 / 32
48 / 48
ca. 32 x 32
0
ca. 32 x 32
0
ca. 31 x 31
0
ca. 31 x 31
0
90
97
112
175
23.750
23.750
23.750
23.750
Roll dimension m
width x height
Raw Material
Polyester (PET) Polypropylene (PP)
Tensile strength kN/m
Elongation at max tensile strength %
Tensile strength at 2% elongation kN/m
Tensile strength at 5% elongation kN/m
Approx. Mesh size mm
longitudinalx transverse
Production specific elongation %
Roll weight (approx.) kg
Truck load 13.6 Euro trailer m
2
4.75x 50
or 100
4.75 x 50
or 100
20 ft. Container load m
2
11.875
11.875
11.875
11.875
40 ft. Container load m
2
21.375
21.375
21.375
21.375
95.0
95.0
95.0
95.0
high
high
high
UV - resistance (remaining tensile strength)%
mer Weather resistance
high
geotextilemembranes.co.uk
..................we cover the earth
TURF MESH
GRASS PROTECTION
SYSTEM
TURF
REINFORCEMENT
MESH
Turf Mesh is laid directly onto the grass
surface and secured in place by supplied
steel U-pins. Grass roots quickly grow
through and establish within the mesh
apertures, areas of installation return to a
natural appearance as the Turf Mesh
becomes part of the grass root matrix.
Turf Mesh has been
ly designed
to facilitate vehicular tra c on ground
with established grass/turf without
e ecting normal gardening practices e.g.
mowing, fertilising, rolling.
Turf Mesh is available in 2 two grades,
Standard and Heavy to suit di erent
loading capacities from pedestrian to
emergency vehicle access. Turf Mesh is
available in several roll sizes from stock,
please contact our sales department for
further details and design advice.
APPLICATIONS
Ov ow Car Parks
Pedestrian grassed areas
Emergency Access Routes
Golf Course Buggy Access
Caravan Parks
Equestrian Surface Reinforcement
Footpaths & Cycle Tracks
Light Aircraft taxi-ways
geotextilemembranes.co.uk
..................we cover the earth
TURFGUARD
While grassed areas provide a naturally aesthetic environment, when they have
been tra ked on by either vehicles or pedestrians there is a risk of the grass being
damaged or worn away.
Geotextilemembranes o er a wide choice of grass reinforcement meshes that provide a
range of performance levels from light caravan park usage through to heavy duty
reinforcement mesh used for access roads and car parks.
Turfguard is manufactured from HDPE which makes the product
tough and durable whilst also being flexible and lightweight for
ease of installation. Turfguard can be used to either temporarily or
permanently reinforce grassed areas, preventing rutting and other
damage caused by vehicle and pedestrian traf c.
We have two options available – heavy duty and standard to meet
all levels of traf cking.
APPLICATIONS
BENEFITS
• Overspill car parks
• Pathways
• Golf courses
• Lightweight runways
• Wheelchair access routes
• Grass verges
• Light aircraft Taxiways
• Easy and quick to install
• No need for excavation
• Extensive levels of reinforcement and protection
• Suitable for permanent or temporary applications
• Rot resistant and UV stabilised for longer life
• Available in black or green
geotextilemembranes.co.uk
..................we cover the earth
SAFETY RUBBER MAT
SPE CIFICA TION &
INST ALLATION
GUIDANCE
Safety Rubber Mat can be installed directly onto existing grassed areas by using the
following simple guidelines or it can be positioned over Ecogrid tiles for a soft grassed surface.
INSTALLATION METHODS
1.
Measure and mark out the site where Safety Rubber Mat will be installed, cut the
grass short, remove all clippings & debris.
2.
Level any uneven areas of the pr oposed site using a good quality sandy top soil. Firm
the surface & seed or turf the area.
3.
Optional Structural Mesh layer
On sites where the grass surface is pr one to being wet and soft, the placement of an
additional layer of lightweight plastic
550g/sqm – Part No. 009862) will provide additional structural support to the Safety
Rubber Mat. This additional mesh layer must be installed using plastic pegs, ensuring
that its perimeter edges are no less than 150mm in from the proposed perimeter
edges of the Safety Rubber Mat.
4.
Lay out the Safety Rubber Mat on the proposed site and cut the mats to t around
any play equipment or obstacles as required. Mats which require reducing to less
than half their original size are less effective and should be avoided wherever possible.
5.
Proceed across the area from one perimeter edge butting the mats
against
each other and fastening all edges tightly together using the black cable ties (supplied).
A minimum of 4 cable ties per edge joint will be required (i.e. 12 Ties per mat). Trim
off the ends of the fixed cable ties ensuring that the cut end of the ties are not creating
a hazard by being exposed above the surface of the mat.
6.
Whilst
the cable ties to the edges of the mats, the plastic
pins (supplied)
can also be applied to each mat if required or specified. A minimum of 3 pegs per perimeter
edge of each mat is recommended (i.e. 8 pegs per mat).
7.
Optional edge blending w here a discreet grass to rubber mat interface is required.
Using a spade or half-moon edging tool, cut a slit into the ground along the perimeter
edge of the rubber mat and to a depth of approximately 75mm.
Roll back the edge of the Safety Rubber Mat. Then, using a spade and starting
approximately 150mm from the slit and working away fr om the rolled back mat, cut
at the
a wedge shaped slice of turf out of the surface in the direction of and
depth of the 75mm slit. Remove the turf (retain for re-use if required) leaving a
wedge shaped exposed soil channel. Continue this operation around the perimeter
of the rubber mats where edge blending is required.
Roll the edge of the Safety Rubber Mat back down into the exposed wedge
shaped channel. Pin the edge to the ground through the small holes in the mat with
the
plastic pins supplied and at same rate as previously in Item 6. Then, either; r
down and seed
exposed ramped edge to its original ground level with topsoil,
as normal; Or alternatively, only the rubber mat cells with top soil, then trim a layer
of soil from the retained turf to give it an appropriate thickness (approx 50mm), then
re-bed the turf over the filled rubber mat and firm it into place to provide a discreet edge.
Lay the rubber matting plus optional
reinforcement grass mesh on to
existing grass.
Connect matting together with cable ties.
Fix mats using our olastic pegs.
Allow the grass to grow through the
mesh apertures.
The grass will gr ow thr ough and cover the apertur es of the Safety Ru bber Mat in the
ensuing weeks. The grass can be cut as normal.
Equipment Requir ed
Tape measure, Spray Marker or pins, Mower, Sharp knife, Gloves, Hammer/Mallet, Spade or Turf Cutting Tools, Cable Ties &
Plastic Pegs (Supplied), Rubbish disposal bags, Sandy Top soil, Grass seed.
8.
Optional Products:
Ground stabilising mesh, 30m x 2m rolls.
It is the
or installers responsibility to
the suitability for purpose of this product prior to installation. CFH (Critical
es will be
by soil type and local environmental conditions.
Fall Height)
Cable Ties & Plastic Pegs supplied with Safety Rubber Mat
Minimum of 100 Pegs (1 bag): Black 140mm (Ptn.060351) long Polypropylene pegs & 100 Cable Ties (Ptn.060870) (1 bag) per order
up to 8 mats (12sqm). Orders greater than 8 mats (12sqm) will be supplied with 1 Bag of Pegs (100) & 1 bag of Cable Ties
(100) per each multiple of 8 mats (12sqm).