Download Report

A Coincident Index for Texas Residential Construction
Jesus Cañas and Keith R. Phillips1
Luis B. Torres2
March 16, 2015
Publication 2093
Abstract A coincident index is estimated monthly since 1990 to measure the residential construction cycle in Texas. The index is based on the movements in three direct measures of residential construction activity: real contract values, real wages paid and the number of jobs. While each of these indicators are reflective of residential construction activity, the timing and direction of their changes can differ from month to month and over the course of the cycle. The coincident index is calculated using a dynamic Kalman filter designed to measure the underlying time-‐
dependent comovement in the component series. The coincident index shows that the timing 1
Dallas Federal Reserve Corresponding Author. Real Estate Center Texas A&M University. Email: ltorres@mays.tamu.edu Acknowledgement to Yongzhi Sun for the estimation of Kim and Nelson (1998) coincident index. 2
1 of the residential construction cycle differs from the Texas business cycle and the U.S. residential construction cycle. The index should be a useful tool for analysts seeking to understand the current direction of Texas residential construction activity. Introduction The recent boom and bust in home prices and residential construction and its impact on the global financial crisis has highlighted the need for up-‐to-‐date indicators that can help analyze the residential construction sector. While various measures of residential construction are available, what is needed is a comprehensive measure of the direction of this important sector because various indicators can at any point in time move in different directions. Historically the residential construction sector has played an important role in the U.S. business cycle as exemplified by the use of residential building permits in the Conference Board U.S. Leading Index. While the timing of the residential construction cycle may not always match the overall business cycle, its size and volatility make it an important sector in the overall economy’s growth. This is true at the regional level as well. A coincident index seeks to measure the underlying comovement among various broad measures of an economy or sector that is consistent with an underlying time-‐dependent business cycle. The index can be used to define precise peaks and troughs in the cycle and thus the timing and length of expansions and recessions. Indices are constructed from variables that represent broad measures of the economy or sectors of interest but come from different sources or measure different types of activity such as labor, capital, consumption or production. For example, while real gross domestic product (RGDP) is a broad measure of economic activity, the Conference Board estimates a U.S. coincident index that includes measures such as employment, income, production and sales. The underlying comovement of these variables is likely to better represent the business cycle than simply the movements in RGDP. 2 Research on business cycle indices has expanded through the years to regional economies. Such widespread acceptance of indices is explained by their recognized ability to measure the overall direction and timing of broad movements in the overall economy or in specific sectors. This is especially critical in the absence of a timely measure of state and local gross state product (GSP) and the lack of high quality historical time series. Regional coincident indicators have done a good job of providing a timely and accurate overall picture of the current state of the local economy. To date there is no reliable summary indicator to measure the residential construction cycle at a regional level. A methodology is applied to calculate a single underlying unobserved variable that represents the coincident index. The approach allows the data to define the component weights that best define the underlying comovement in the component variables. There is no single indicator that best estimates the timing and length of the broad upswings and downturns in residential construction in Texas. Even real residential construction contract values by themselves do not capture the underlying state of the sector as contracts can be canceled, and the timing of the construction activity can vary between when the contract is signed and when the actual building activity occurs. Coincident Economic Indicators Overview Cyclical indicators have been used for many years as tools to understand the aggregate national economy and more recently the regional economy of U.S. states and sectors. The National Bureau of Economic Research (NBER) published the first cyclical indicators in 1938, based on work done by Wesley Mitchell and Arthur Burns (1938).3 In 1996, the preparation and publication of the cyclical indicators was transferred to the Conference Board from the NBER and Bureau of Economic Analysis (BEA) and are still estimated by the board. The cyclical indicators include the composite indicators: leading, coincident and 3
The Harvard ABC curves popular in the 1920s are an even earlier construction of leading indicators as discussed by Paul Samuelson (1987). 3 lagging. Unlike the leading indicator, which moves ahead of the business cycle, a coincident moves in tandem with the business cycle while the lagging moves behind it. The main motivation for the construction of composite indexes of economic activity is the belief that there is no single proven and accepted cause of all observed business cycles. If different recessions are affected by different factors, it is likely that no one indicator will perform best over all the peaks and troughs. To increase the probability of getting true signals and reduce the chance of false ones, an array of indicators is chosen from a wide range of economic sectors and processes to construct an index that measures the average behavior of a group of economic time series that show similar timing at business cycle turns but represent a cross-‐section of activities or sectors of the economy. Another reason for constructing composite indicators is that measurement errors can be reduced by combining the series. Data and Methodology Coincident Data and Methodology To determine which series would be included in the construction of the coincident indicator for the Texas residential construction sector, broad measures of the sector that reflected the timing of when the activity took place were sought. Building a residential dwelling is a process that takes on average from four to six months from when the building permit is issued to the time the residential building is finished. Building permit information includes the contract values of the residence being built because it is required for the permit. One problem with a broad measure like residential contract values is that the contract is issued and thus measured months before the house is built. During the construction process, labor and capital is utilized in various degrees until the house is completed. While capital usage is difficult to measure, the Bureau of Labor Statistics (BLS) has several different measures of labor that can be used to measure the intensity and timing of residential construction activity, including employment in residential building construction and total wages paid. Employment is 4 reported monthly, while wages are reported quarterly. Employment and total wages paid often move differently and can turn down with notably different timing. Total wages paid is equal to employment times hours worked times the hourly wage. The hourly wage varies with productivity because, in theory, workers are paid their marginal product of labor. One influence impacting the marginal product of labor is capital useage — because the more capital used, such as heavy equipment, the more output each worker will have. In this sense, the usage of total wages paid at least indirectly helps account for capital usage. Because employment does not differentiate between part-‐time and full-‐time workers and hours worked in general, total wages paid can account for this. While real total wages paid will fluctuate with hours worked and worker productivity, its weakness is that it is not available on a monthly basis. Using both series gives a better picture of the timing and magnitude of construction activity. The real value of residential construction contracts, which are a good measure of the value of construction but not necessarily the correct timing of the activity, are also used. In the dynamic Kalman filter the analyst much choose the series that sets the timing of the index. Because employees are working while construction is taking place this measure is used to set the timing of the index. Leads of real residential construction contracts are tried until the statistically optimal timing can be determined. To deflate the nominal values of total wages paid in residential building construction and of contract values, an estimate of the Texas Consumer Price Index (CPI) is employed. The Texas CPI is estimated from an interpolation procedure of the bi-‐monthly CPI data for Dallas-‐Fort Worth and the Houston-‐
Galveston-‐Brazoria areas for all urban consumers with the base period 1982–84. It consists of seasonally adjusting both CPIs to later interpolate the series that are measured every other month to estimate a monthly data CPI series that represents Texas. All three series are available for the period from 1990 to 2014. Prior to 1990, the data for employment and wages are based on the Standard Industrial Classification System and thus are not consistent with the North American Industrial Classification 5 System data used here. Information on the series used to estimate the coincident index is presented in Table 1. Table 1. Coincident Series
Name
Transformation
Source
Availability
Notes
Residential
Contract Values
Series
RVAL
Log First
Differences
McGraw-Hill
Construction
Deflated by Texas
Shelter CPI-U
Residential Construction
Employment
EMP
Log First
Differences
BLS
Residential Construction
Wages
WGS
Log First
Differences
BLS
Monthly, third week
following month end
Monthly, released
quarterly, six months
after end of reporting
quarter
Quarterly, six months
after the end of
reporting quarter
Deflated by Texas
All CIP-U
Note: All series are seasonally adjusted.
Source: Real Estate Center at Texas A&M University
Coincident Results and Evaluation The following criteria are used to select the specification for the coincident model for residential construction in Texas: 1. The estimated index should be consistent with experts’ knowledge of the state’s history of residential construction. 2. The index should reflect broad patterns of persistent increase followed by persistent decline that clearly mark periods of expansion and recession. These patterns should be more evident in the index than in any single input series and should, in general, be consistent with the swings in the series. 3. Characteristics of the index such as (a) smoothness, (b) timing of turning points and (c) contribution of coincident indicators should be robust to minor changes in its specification or in the addition of new observations. The estimation period for the coincident index is January 1990 to November 2014. The dynamic Kalman filter due to Stock and Watson (1989) is used to estimate the coincident index. 6 Using the Stock and Watson methodology produces an index that is stationary over time as its key purpose is to extract business cycle movements from the component series regardless of the potentially differing trends in these series. It is customary to add in a trend to the series to make the index more comparable to other time series. The trend in the composite index of coincident indicators for residential construction is set equal to the trend in real contract values (Figure 1). The periods of economic contraction as defined by the coincident index are shaded. The coincident index moves smoothly upward during expansion and downward during contraction, thus minimizing the number of false business signals of business cycle turning points. The index provides a smooth and clear signal of the state of residential construction from the three input variables (Figure 2). The Real Estate Center at Texas A&M University identified the turning points of Texas residential business construction independent of this index4. These turning points serve as a benchmark to evaluate the performance of the residential construction coincident index (Table 2). Center researchers applied the same methodology as the NBER dating committee for the U.S. economy that consists of identifying economic activity based on a range of indicators while at the same time defining contractions and expansions based on their knowledge of and expertise within the residential market in Texas. They identified three troughs and two peaks in the Texas residential construction business cycle between January 1970 and March 2014. The Texas residential coincident index matched the designated turning points for the peak achieved between September 2006 and January 2007 and the trough between April and June 2011 (Figure 1). No other peaks and troughs were identified by the coincident index besides the aforementioned from October 1990 to March 2014. The coincident index performs well, replicating the features of the Texas residential construction business cycle for the sample period. 4
Gaines, James; Torres, Luis. “Dating the Business Cycle for Texas Residential Housing Construction,” Real Estate Center at Texas A&M University, Technical Report No. 2086, January 2015. 7 Table 2. Chronology of Texas Residential Construction Business Cycle
Peak Date
Trough Date
Months Contraction,
Peak to Trough
Months Expansion,
Trough to Peak
September 1979
May 1984
January 2007
August 1982
March 1989
June 2011
36
59
54
—
22
215
Source: Real Estate Center at Texas A&M University
The Texas coincident index estimated by the Dallas Federal Reserve has matched the designated turning points for the state’s economy and is widely used as the major reference for the regional business cycle (Table 3). The Texas residential construction index did not conform with the timing of the turning points in the overall Texas economy. For example, residential construction did not register a downturn in 2001, but it did register a slowdown two years later in 2003 (Figure 3). These differences reflect the differences between the aggregate economies business cycle and residential construction. In particular, they show how residential investment can lead the business cycle, whereas a fall in residential investment can be a foreteller of a recession, as was observed during 2007. Table 3. Chronology of U.S. and Texas Business Cycles
Peak Date
Trough Date
Months Contraction,
Peak to Trough
Months Expansion,
Trough to Peak
November 1970
March 1975
July 1980
November 1982
March 1991
November 2001
June 2009
11
16
6
16
8
8
18
106
36
58
12
92
120
73
March 1983
January 1987
June 2003
November 2009
14
16
28
18
—
32
171
61
United States
December 1969
November 1973
January 1980
July 1981
July 1990
March 2001
December 2007
Texas
February 1982
October 1985
March 2001
June 2008
Note: The coincident index from the Dallas Federal Reserve does not identify an economic downturn
for Texas during the 1970s.
Sources: National Bureau of Economic Research (NBER) and Dallas Federal Reserve
The differences also indicate that the 2001 technology downturn did not affect residential construction in Texas. The same methodology was applied to estimate a residential construction coincident index for 8 the United States to compare the national residential construction cycle with Texas’. Both coincident indexes are presented in Figure 4. A difference in timing and magnitude between them is observed, as in 2000 and 2001, when the U.S. coincident index reflects a mild recession compared with the Texas index, which represents more of a slowdown. Also, between 2006 and 2010, residential construction in Texas recorded a downturn later than the nation, while recovering earlier than the nation (Figure 5). This confirms past findings regarding the heterogeneity of business cycles in both timing and magnitude at different levels of disaggregation, where differences are present not only from national to regional but from aggregate to industry or sector. To enhance the information from the residential construction coincident index, the probability of recession is estimated. The methodology uses changes in the index to compute the probability of recession. Once the model’s probability exceeds a given threshold, say 95 percent, the analyst can be very certain that a downturn in the residential construction sector has begun. Choosing the critical value involves a trade-‐off between the number of false signals and the number of recessions that develop. The higher the critical value, the smaller the number of false signals but the larger the number of nonidentified recessions and vice versa. Applying the methodology to the monthly growth rate in the Texas residential construction coincident index from October 1990 to November 2014 produced the probability of recessions shown in Figure 6. The estimations clearly highlight the contraction and expansion captured by the residential coincident index during that period. For the single prolonged recession over the period, the probability of recession rose above 90 percent in April of 2007 and ended in June of 2011, as the Texas housing sector felt the effects of the national housing bubble and the Great Recession. It also captures the temporary effect in 2010 of the federal homebuyer tax-‐credit program, which did not lead the construction sector out of recession. This recession period matches the recession defined by the Real Estate Center and is longer 9 than the recession defined for the Texas economy by the Dallas Federal Reserve Texas coincident index from August 2008 to November 2009. Throughout most of the expansion period, the probability of recession remained close to zero. Exceptions were mid-‐1995 and the start of 1997 when a single, monthly, relatively large decline was observed in the residential coincident index, causing the probability of recession to increase above 95 percent in a single month. In addition, from December 2002 to the first of half of 2003, the probability of recession increased above 50 percent but never rose above 81 percent. During that period, the coincident index declined during two consecutive months only one time. Even though the Texas economy registered a recession from April 2001 to June 2003 as defined by the Texas coincident index, the residential construction sector registered a slowdown but did not weaken enough to be classified as a recession. Thus, in terms of defining recessions, the methodology for estimating the probability of a recession shows the ability of the residential coincident index in signaling the timing of a downturn in construction activity in Texas. For expansions, the index identified the trough that signaled the timing of the recovery in residential construction and was characterized by a fall in the probability of a recession. To evaluate the performance of the estimated coincident index, another index is estimated that incorporates the Kim and Nelson (1998) procedure. The appeal of the Kim and Nelson methodology is that it is a nonlinear model that treats recessions and expansions asymmetrically. They estimate a dynamic factor model in which a single latent factor has a mean that follows a latent Hamilton (1989) Markov regime switching process. Thus, it potentially encompasses features of the business cycle identified by Burns and Mitchell (1946), which tracks the comovement among economic variables through booms and busts as well as the nonlinearity in its evolution of the turning points of the business cycle. However, some studies have shown that the more complicated models like this do not replicate 10 business cycle features better than the simpler linear models and have been found to lack robustness with respect to the sample period and to a change in the data. This procedure is less attractive to use because it does not allow for use of different frequencies of data (for example, monthly and quarterly) at the same time. To convert quarterly residential construction wages into a monthly series, a procedure for the interpolation of quarterly to monthly data is utilized. Another issue with this approach is that it does not allow for the use of different lengths in the time series. That is, if one or more series are published in a more timely manner, the initial methodology will allow estimation of the coincident index up to where the series are available even if one or more series are of shorter length, while the second will estimate the coincident index to the point at which data are available for all series. The estimated coincident indexes from both models are presented in Figure 7. The Kim and Nelson index seems to lag Stock and Watson, not matching the turning points determined by the Real Estate Center by almost 12 months for the peak while matching the trough in June 2011 (Table 4). The asymmetry feature of the regime-‐switching is prevalent in the more accurate matching of the trough vs. the peak that lags behind the predetermined turning point. The differences in both indexes and the matching of the turning points is due to the role of residential employment in the Kim and Nelson index compared with the Stock and Watson index. As mentioned earlier, wages would be a better coincident indicator of actual residential construction activity than employment. Overall, estimates of the turning points generated by the Kim and Nelson model are less sharp and agree less with the Real Estate Center dates than the Stock and Watson model (Figure 7). When comparing the probability of recession identified by the methodologies, the Kim and Nelson index presents more false signals of the probability of recession than the Stock and Watson methodology (Figure 8). Thus, the Stock and Watson model seems to outperform the Kim and Nelson model to define expansions and recessions for residential construction in the state of Texas. 11 Table 4. Chronology of Texas Residential Construction Business Cycle
by Coincident Index
Peak Date
Stock and Watson,
September 2006
Kim and Nelson,
July 2007
Trough Date
Months Contraction,
Peak to Trough
Months Expansion,
Trough to Peak
April 2011
55
192
June 2011
48
202
Note: Index starts in October 1990.
Source: Real Estate Center at Texas A&M University
Conclusion A coincident index for residential construction in Texas is estimated since 1990. This coincident index was constructed with real residential construction contract values and residential construction employment and wages. It demonstrated in this short period its ability to indicate broad directional changes in residential construction in a timely manner. Its estimates of the turning points are sharper and agree much more closely with dates determined by experts at the Real Estate Center. The Texas residential construction index defines one brief slowdown in residential construction from 2001 to 2002 and a steep, long recession from 2007 to 2011. The index shows that the residential construction cycle differs in timing from the Texas business cycle and the U.S. residential construction cycle. Although the index performed well since 1990, this is a relatively short period by which to judge the coincident business cycle indicator. Currently, with data through December 2014, the index is signaling a healthy expansion in Texas residential construction activity with a very low probability that the sector is entering a downturn. The usefulness of this indicator to signal directional changes in Texas residential construction will be monitored in real time in the future. Cañas and Phillips are with the Dallas Federal Reserve and Dr. Torres (ltorres@mays.tamu.edu) is a research economist with the
Real Estate Center at Texas A&M University.
12 References Ahking, Francis W. “Measuring U.S. Business Cycles: A Comparison of Two Methods and Two Indicators of Economic Activities,” Working Paper Department of Economics, The University of Connecticut, May 2013. Bisgaardm Søren; Kulahci, Murat. “Time Series Analysis and Forecasting by Example,” Wiley Series in Probabilistic and Statistics, 2011. Clayton-‐Matthews, Alan; Stock James H. “An application of the Stock/Watson index methodology to the Massachusetts economy,” Journal of Social and Economic Measurement, Vol. 25, No. 3 and 4, 1988/1989. Crone, Theodore M. “Using state indexes to define economic regions in the US,” Journal of Social and Economic Measurement, Special Issue on Regional Economic Models, Vol. 24, No. 3 and 4, 1988/1989. Diebold, Francis X.; Rudebusch, Glenn D. “Measuring Business Cycles: A Modern Perspective,” Review of Economic and Statistics, 78, pp.67–77. Gaines, James; Torres, Luis. “Dating the Business Cycle for Texas Residential Housing Construction,” Real Estate Center at Texas A&M University, Technical Report No. 2086, January 2015. Ghent, Andra C.; Owyang, Michael T. “Is housing the business cycle? Evidence from U.S. cities,” Journal of Urban Economics, Vol. 67, pp. 336–351, 2010. Hamilton, James D. “A New Approach to the Economic Analysis of Nonstationary Time Series and the Business Cycle,” Econometrica, No. 57, March 1989, pp. 357–384. Kim, Chang-‐Jin.; Nelson, Charles R. “Business Cycle Turning Points, A New Coincident Index, and Tests of Duration Dependence Based on a Dynamic Factor Model with Regime Switching,” The Review of Economics and Statistics,” No. 80, pp.188–201, 1998. Kozlowski, Paul J. “Regional Indexes of Leading Indicators: An Evaluation of Forecasting Performance,” Growth and Change, Summer 1987. Koopmans, T.C. “Measurement Without Theory,” Review of Economics and Statistics, Vol. 29, No. 3, pp. 161–172, August 1947. Massmann, Michael; Mitchell, James; Weale, Martin. “Business Cycle Turning Points: A Survey of Statistical Techniques,” National Institute Economic Review, No.183, January 2003. Moylan, Carol E. “Cyclical Indicators for the United States,” Third International Seminar on Early Warning and Business Cycle Indicators,” Bureau of Economic Analysis, 2010. Neftci, Salih N.”Optimal Prediction of Cyclical Downturns,” Journal of Economic Dynamics and Control,” Vol. 4, pp. 225–41, 1982. Orr, J.; Rich, R.; Rosen R. “Two New Indexes Offer a Broad View of Economic Activity in the New York-‐ New Jersey Region,” Current Issues in Economics and Finance, Federal Reserve Bank of New York, No. 5(14), October 1999. Phillips, Keith R. “New Tools for Analyzing the Texas Economy: Indexes of Coincident and Leading Economic Indicators,” Economic Review, Federal Reserve Bank of Dallas, July 1988. 13 Phillips, Keith R. “A New Monthly Index of the Texas Business Cycle,” Working Paper, Federal Reserve Bank of Dallas, January 2004. Phillips, Keith R.; Cañas, Jesus. “Texas Economy Moves From Recovery to Expansion,” Southwest Economy, Federal Reserve Bank of Dallas, First Quarter, 2012. Phillips, Keith R.; Vargas, Lucinda; Zarnowitz, Victor. “New Tools for Analyzing the Mexican Economy: Indexes of Coincident and Leading Economic Indicators,” Economic Review, Federal Reserve Bank of Dallas, Second Quarter 1996. Stock, James H.; Watson, Mark W. “New Indexes of Coincident and Leading Economic Indicators,” NBER Macroeconomics Annual, Vol. 4, 1989. The Conference Board. “Business Cycle Indicators Handbook,” January 2001. Tsao, C.K.H. “The Massachusetts Index: Methodology in Construction Using Historical Data, Mimeo,” University of Massachusetts Boston, 1998. Yϋcel, Mine; Thompson, John. “Texas Economy Stalled by recession,” Southwest Economy, Federal Reserve Bank of Dallas, Issue 6, November/December 2002. Zarnowitz, Victor. “Composite Indexes of Leading, Coincident, and Lagging Indicators,” NBER Business Cycles: Theory, History, Indicators, and Forecasting, pp. 316–356, 1992. 14 Figure 1. Texas Residential Construction Coincident Index (Index 1990: 10 = 100)
500 400 300 200 Feb-‐14 Apr-‐13 Jun-‐12 Aug-‐11 Oct-‐10 Feb-‐09 Dec-‐09 Apr-‐08 Jun-‐07 Aug-‐06 Oct-‐05 Feb-‐04 Dec-‐04 Apr-‐03 Jun-‐02 Aug-‐01 Oct-‐00 Feb-‐99 Dec-‐99 Apr-‐98 Jun-‐97 Aug-‐96 Oct-‐95 Feb-‐94 Dec-‐94 Apr-‐93 Jun-‐92 Aug-‐91 0 Oct-‐90 100 Notes: Shaded areas represent a recession in Texas residential construction. Retrended with real contract values. Source: Real Estate Center at Texas A&M University 15 Figure 2. Components of Texas Residential Construction Coincident Index (Index 1990: IV = 100)
800 700 Residensal Construcson Coincident Index Residensal construcson employment Residensal contract values Residensal construcson wages 600 500 400 300 200 100 Source: Real Estate Center at Texas A&M University 16 Figure 3. Texas Residential Construction Coincident Index and Texas Business Cycle (Month-‐to-‐Month % Annualized, Seasonally Adjusted)
8 m/m % m/m% Residensal Construcson Coincident Index 60 Texas Coincident Index (right y-‐axis) 6 40 4 2 20 0 0 -‐2 -‐20 -‐4 -‐40 Mar-‐14 May-‐13 Jul-‐12 Sep-‐11 Jan-‐10 Nov-‐10 Mar-‐09 Jul-‐07 May-‐08 Sep-‐06 Jan-‐05 Nov-‐05 Mar-‐04 May-‐03 Jul-‐02 Sep-‐01 Nov-‐00 Jan-‐00 Mar-‐99 May-‐98 Jul-‐97 Sep-‐96 Nov-‐95 Jan-‐95 Mar-‐94 May-‐93 Jul-‐92 Sep-‐91 Nov-‐90 -‐60 -‐6 -‐8 Notes: Shaded areas represent Texas recessions as defined by Yϋcel and Thompson, and Phillips Texas coincident index. Source: Real Estate Center at Texas A&M University 17 Figure 4. Texas and U.S. Residential Construction Coincident Index (Index 1990: 10 = 100)
480 240 Residensal Construcson Coincident Index TX 430 220 Residensal Construcson Coincident Index US (y-‐right axis) Feb-‐14 Jun-‐12 Apr-‐13 Aug-‐11 Oct-‐10 Dec-‐09 Apr-‐08 Feb-‐09 Jun-‐07 Oct-‐05 Aug-‐06 Dec-‐04 Apr-‐03 Feb-‐04 Jun-‐02 Aug-‐01 80 Oct-‐00 80 Feb-‐99 100 Dec-‐99 130 Jun-‐97 120 Apr-‐98 180 Aug-‐96 140 Oct-‐95 230 Dec-‐94 160 Feb-‐94 280 Jun-‐92 180 Apr-‐93 330 Oct-‐90 200 Aug-‐91 380 Notes: Shaded areas represent a recession in Texas residential construction. Both coincident indexes are retrended with real contract values. Source: Real Estate Center at Texas A&M University 18 Figure 5. Texas and U.S. Residential Construction Coincident Index (Month-‐to-‐Month % Annualized, Seasonally Adjusted)
80 Residensal Construcson Coincident Index TX 60 Residensal Construcson Coincident Index US 40 20 0 -‐20 Nov-‐14 Feb-‐14 May-‐13 Aug-‐12 Feb-‐11 Nov-‐11 Aug-‐09 May-‐10 Feb-‐08 Nov-‐08 Aug-‐06 May-‐07 Nov-‐05 Feb-‐05 May-‐04 Aug-‐03 Nov-‐02 Feb-‐02 Aug-‐00 May-‐01 Feb-‐99 Nov-‐99 Aug-‐97 May-‐98 Nov-‐96 Feb-‐96 May-‐95 Nov-‐93 Aug-‐94 Feb-‐93 Aug-‐91 May-‐92 -‐60 Nov-‐90 -‐40 Source: Real Estate Center at Texas A&M University 19 Figure 6. Texas Residential Construction Coincident Index and Neftci Probability of Recession (Month-‐to-‐Month % Annualized, Seasonally Adjusted)
Probability 1.00 Residensal Construcson Coincident Index m/m % Neuci Probability of Recession (right y-‐axis) 60 0.90 0.80 40 0.70 20 0.60 0.50 0 0.40 -‐20 0.30 0.20 -‐40 Source: Real Estate Center at Texas A&M University 20 Nov-‐14 Jul-‐13 Mar-‐14 Nov-‐12 Jul-‐11 Mar-‐12 Nov-‐10 Mar-‐10 Jul-‐09 Nov-‐08 Mar-‐08 Jul-‐07 Nov-‐06 Jul-‐05 Mar-‐06 Nov-‐04 Jul-‐03 Mar-‐04 Nov-‐02 Jul-‐01 Mar-‐02 Nov-‐00 Mar-‐00 Jul-‐99 Nov-‐98 Mar-‐98 Jul-‐97 Nov-‐96 Jul-‐95 Mar-‐96 Nov-‐94 Jul-‐93 Mar-‐94 Nov-‐92 Jul-‐91 Mar-‐92 -‐60 Nov-‐90 0.10 0.00 Figure 7. Texas Residential Construction Coincident Index (Index 1990: 10 = 100)
600 Stock and Watson Kim and Nelson 500 400 300 200 Feb-‐14 Jun-‐12 Apr-‐13 Oct-‐10 Aug-‐11 Dec-‐09 Apr-‐08 Feb-‐09 Jun-‐07 Aug-‐06 Oct-‐05 Dec-‐04 Apr-‐03 Feb-‐04 Jun-‐02 Oct-‐00 Aug-‐01 Feb-‐99 Dec-‐99 Jun-‐97 Apr-‐98 Oct-‐95 Aug-‐96 Dec-‐94 Apr-‐93 Feb-‐94 Jun-‐92 Aug-‐91 0 Oct-‐90 100 Note: Shaded areas represent a recession in Texas residential construction. Source: Real Estate Center at Texas A&M University 21 Figure 8. Texas Residential Construction Coincident Index Neftci Probability of Recession Probability (%)
Stock and Watson 1.00 Kim and Nelson 0.80 0.60 0.40 Feb-‐14 May-‐13 Nov-‐11 Aug-‐12 Feb-‐11 May-‐10 Aug-‐09 Nov-‐08 Feb-‐08 May-‐07 Aug-‐06 Nov-‐05 Feb-‐05 May-‐04 Aug-‐03 Nov-‐02 Feb-‐02 Aug-‐00 May-‐01 Feb-‐99 Nov-‐99 Aug-‐97 May-‐98 Feb-‐96 Nov-‐96 Aug-‐94 May-‐95 Feb-‐93 Nov-‐93 Aug-‐91 May-‐92 0.00 Nov-‐90 0.20 Source: Real Estate Center at Texas A&M University © 2015. Real Estate Center. All rights reserved.
22