1. No category

SeeGull" MXf/ex
N
I Scanning Receiver
Concurrent, Flexible Network Testing
CHALLENGE,
Today's wireless networks utilize a wide range of physical infrastructure,
technology protocols, and frequency bands. Network configurations
vary by region and carrier. Even an individual carrier's network in a single
geographic location can be exceedingly complex. A given network may
include multiple technologies and bands deployed in a heterogeneous
network of small cells. Distributed Antenna Systems (DAS), and macro cells.
Cutting-edge technologies such as LTE Advanced carrier aggregation and
Multiple Input Multiple Output (MIMOl add further complexity that can
frequently lead to inefficient data collection. To collect accurate data,
engineers must use multiple scanning receivers in parallel. or repeat each
walk or drive test with differently configured equipment. Either method
can utilize CAPEX and OPEX resources that could otherwise be spent
on improvements to the network.
SOLUTION , The SeeGull MXflex
The SeeGull MXflex empowers engineers to collect complete data with one
scanner in a single test. PCTEt..:s most advanced scanning receiver. the
MXflex has the power and flexibility to accurately test today's complex
wireless networks. It combines the concurrent data collection of the
SeeGull MX with the flexible configuration of PCTEt..:s innovative flex line.
The scanner features software definable. field-upgradeable support of
frequency bands from 130 MZ to 6 GHz. The MXfJex's design includes
a modular front end and parallel high performance signal processing
engines. This enables it to acquire_ process. and report data from all3GPP
defined RF bands across all major technologies at the same time. Multiple
technology and band concurrency allows it to maintain full speed and
)
(\
•
accuracy while measuring complex networks. for high resolution data
density when compared to other scanning receivers. No extra test runs
or additional scanning receivers are required .
•
SCiinners .!' pctel com
______________________________
-
~==========~----~4'~ ~-
|
SeeGull MXflex | Features
130 MHz
2
|
Supports simultaneous
data collection, with up to
six technologies and
no band limitations, including
uplink and downlink.
6 GHz
Software definable,
field-upgradeable support
of frequency bands from
130 MHz to 6 GHz.
Increase data density by testing
multiple concurrent measurements
while collecting up to
six technologies
in the same test.
Collect accurate data with
deep dynamic range for
in-depth characterization
of a heterogeneous network’s
multiple technologies.
Dual LTE scanning with
MIMO interface ports.
Apply to multiple applications
throughout the network lifecycle.
Designed for
full performance
during in-building walk tests
and outdoor drive testing.
Benefits
Reduce project expenses by collecting all the necessary data in less time
Visualize network performance easily with a high-density view of the network
Maximize LTE throughput with 2x2 MIMO and future upgrade to 4x4 MIMO
Simplify setup by discovering all active channels using Blind Scan
Increase ROI with multiple applications, including benchmarking, baseline and CW testing,
spectrum analysis, and network optimization
Enhance signal quality by identifying interference when combined with SeeWave™
Covered by PCTEL’s industry-leading 5 year limited warranty
,l)
b
UMT S
[ WCDMA / HSPA (+ )]
GSM
:
3
Measur emen t Modes
Top N Synchronization Channel ( P- SCH/ S-SCH), Blind Scan,
Reference Signal, Resource Block (Wideband, Subband)
Da t a Modes
RP, RQ, CINR, C yclic Prefix, Time Of fsets, Delay Spread,
Av er aging, L ay er3, LTE MIMO: C N, E C Q I, Es t. Throughput
Channel Band w id t hs
1.4 / 3 / 5 / 10 / 15 / 20 MHz
Max. Number of Channels
24
Measur emen t Ra t es: Top N Sync Channel RS
LTE FDD: 48/sec; 24/sec for 2x2 MIMO; TD-LTE: 19/sec
Dynamic Range (CINR) @ 20 MHz: P-SCH/S-SCH
RS
LTE FDD: -10 t o +22 dB**; T D -LT E: - 8 dB t o +22 dB**
LTE FDD / T D -LT E: - 20 t o +4 0 dB**
Min. Detection Level:
-14 0 dBm @ 15 k Hz
|
f
------+
-MISO,
-------l
SISO,
MIMO(2 x 2)
A n tennaTechniques
RS RP
RS
Accuracy (CINR):
2 dB (Typical)
- -Relative
-+
------±Top+-------1
Measur emen t Modes
N Pilo t, Blind S c an
CDMA
:.:
E V- DO
~1:!
Da t a Modes
lo, Ec/Io, Aggregate Ec/Io, SIR, Rake Finger C oun t,
Time Of fset, Delay Spread, L ay er3
Channel Band w id t hs
200 kHz / 3.84 MHz
Max. Number of Channels
24
Measur emen t Ra t e
47/sec
Top N CPICH D y namic Range (Ec/Io)
-28 dB**
Min. De t ec t ion Le v el
-127 dBm @ 90% Detection
Rela t i v e Ac cur ac y
Measur emen t Modes
± 1 dB
Color Code, Blind S c an
Data Modes
B S I C, C/I, R S S I, L ay er3
Channel Band w id t hs
30 kHz / 200 kHz
Measur emen t Ra t e
Up to 196 B S I C Decodes/sec
D y namic Range, C/I
+2 dB**
Min. BSIC Dec ode De t ec t ion Le v el
-110 dBm
Rela t i v e Ac cur ac y
± 1 dB
Measur emen t Modes
Top N PN, Blind S c an
Da t a Modes
Channel Band w id t hs
Ec, lo, Ec/Io, Aggregate Ec/Io, Pilot Delay, Delay Spread,
L ay er3
30 kHz / 1.25 MHz
Max. Number of Channels
24
Measur emen t Ra t e
25/sec
Top N PN D y namic Range, Ec/Io
Min. PN De t ec t ion Le v el
Rela t i v e Ac cur ac y
-28 dB**
Measur emen t Modes
Top N PN, Blind S c an
Da t a Modes
Ec, lo, Ec/Io, Aggregate Ec/Io, Pilot Delay, Delay Spread,
L ay er3
Channel Band w id t hs
30 kHz / 1.25 MHz
Max. Number of Channels
24
-130 dBm @ 90% Detection
± 1 dB
Measur emen t Ra t e
25/sec
Top N PN D y namic Range, Ec/Io
Min. PN De t ec t ion Le v el
-18.5 dB**
Rela t i v e Ac cur ac y
Mul t i Technolog y
, r,",
LT E FDD and TD - LT E
SeeGull MXflex | Specifications*
|
-120 dBm @ 90% Detection
± 1 dB
Concur r ent Measur ement Capaci t y
Up to 3 Technologies (Protocol Decoding) and 1 Aggregate
Power Measurement (RSSI, EPS, or Spectrum Analysis)
Measurements Rate Degradation When Measuring
LT E, WCDMA, and G SM C oncur r en t l y
None
Measurements Rate Degradation When Measuring
LT E, CDMA, and E V- DO C oncur r en t l y
None
Ty pical Aggregat e Measurement Rat e
Up to 4 0 0/sec Across 3 Concurrent Technologies
* Specifications are for single - technology scanning.
** @ 90% Signal Detection with < 0.1% False Detection Rate.
~
|
4
|
P o w e r Me a s ur e m e n t s
SeeGull MXflex | Specifications* [ continued ]
RSSI MEASUREMENTS
Measur emen t Ra t e (Ty pical)
LT E
UMTS [WCDMA/HSPA(+)]
GSM
CDMA
E V-DO
Absolu t e Accuracy
ENHANCED POWER SCAN ( EPS™ ) MEASUREMENTS
5,200 ch/sec
2,600 ch/sec
2,600 ch/sec
4,000 ch/sec
4,000 ch/sec
± 1 dB (across Basic RF Input Power Range)
Channel Band w id t hs
Measur emen t Ra t e
5 kHz to 20 MHz in 2.5 kHz Increments
400 MHz/sec @ 5 MHz (Typical)
Absolu t e Accuracy
± 1 dB (across Basic RF Input Power Range)
SPECTRUM ANALYSIS MEASUREMENTS
Measur emen t Range
Measur emen t Ra t e (Single Sweep)
Sensi t i v i t y
RF
C h ar a c t e r i s t i c s
GP S
>110 MHz/sec
- 110 dBm ± 1 dB @ 80 kHz; -120 dBm Min. Discernable Signal
Accuracy
± 1 dB (across Basic RF Input Power Range)
(
LTE POWER ANALYSIS MEASUREMENTS Available for TD-LTE Only )
Measur emen t Ra t e
Accuracy
Channel Range
In t ernall y Genera t ed Spurious Response
1.4 / 3 / 5 / 10 / 15 / 20 MHz
20/sec @ 20 MHz
± 1 dB (across Basic RF Input Power Range)
13 0 MHz t o 6 GHz
-100 dBm Max.
Conduc t ed Local Oscilla t or
-100 dBm Max.
RF Inpu t Power Range
Desensi t iza t ion
- 10 dBm Max. In - B a n d; +5 dBm Ma x. Ou t - of-Band
Adjacent Channel >50 dB; Alternat ve Channel >60 dB
Saf e RF Inpu t Range
≤ 10 dBm
Channel Band w id t hs
P h y s i c al
>90 dB
Fr equency Accuracy (Ambien t)
± 0.05 ppm (GPS Locked); ± 0.1 ppm (GPS Unlocked)
Intermodulation-free Dynamic Range, 2 tone (level 2)
- 40 dBm, 3.8 GHz, - 55 dBc (Typical), - 12.5 dBm TOI
- 25 dBm, 3.8 GHz, - 60 dBc (Typical), 5 dBm TOI
Ty pe
50 Channel Internal Receiver
Posi t ion Accuracy
± 2.5 meter
Acquisi t ion Time
Cold Start: <30 sec; Hot Start: <2 sec
Sensi t i v i t y (Track ing)
> -150 dBm
Inpu t Power
+10 t o +16 VDC (80W Nominal, 90W Ma x.)
Size
Weigh t
9.5” D x 5.9” W x 4.3” H (241 mm D x 150 mm W x 110 mm H)
4.9 lbs. (2.2 kg)
Tempera t ur e Range
Opera t ing: 0°C t o +50°C; S t orage: - 40°C t o +85°C
Hos t Da t a Communica t ions In t er f ace
RF Inpu t
USB 2.0
Saf e t y (CE)
EN 60950 -1
EMC
EN 301 489-1
Shock and V ibra t ion
MIL- STD - 810 G, SA E J1455
Complian t (6/6)
RoHS
RF: SMA Female (50Ω); GPS: Male (50Ω) SMB
* Specifications are for single - technology scanning.
Please contact your sales representative or email Scanners@pctel.com for more details.
P C T E L , I n c. R F S o l u t i o n s
20410 Observation Drive Suite 200
Germantown Maryland USA 20876
r f s o l u t i on s . p c t e l . c o m
p +1 301 515 0036
|
f +1 301 515 0037
~
~
QMS Certified ISO 9001: 2008
10 MRK 6 - 05 R e v B May 2015
Specifications subject to change without notice.