1. home and garden
2. home furnishings
3. rugs and carpets

New Delhi
Gurgaon
Sydney
Chennai
Melbourne
Hyderabad
Canberra
Ahmedabad
Bangalore
Perth
BGSB Concrete Solutions (P) Limited
corporate office:
79-A, Udyog Vihar, Phase-5
Gurgaon, Haryana-122016
T. +91-124-4084200
F. +91-124-4360132
E. info@bgsb.in
W. www.bgsb.in
concrete polishing and toppings - a solution for every
surface
www.bgsb.in
BGSB Concrete Solutions (P) Limited
are licensed applicators of concrete floorings
in India. BGSB has technical collaboration with
Polished concrete Pty. Ltd – Australia for exclusive
applications of concrete flooring, Floor polishing
systems, Super hardening systems, Anti-dusting
treatments, Micro toppings & Floor Restorations.
When choosing BGSB rest assured as you have
selected the best!
Services offered:
Polished concrete System – with 10
years* anti-dusting warranty.
Super hardening treatments – Using
Lithium Silicate densifiers & diamond pads.
Polished concrete system
Self-level Flooring
Concrete Flooring
Colored concrete Flooring
Stamped Concrete Flooring
SFRC Jointless Flooring
Concrete flooring – confirming to flatness
standards of TR34, DIN 15 185 & ASTM 1155.
Self level floorings – with rapid setting
technology.
Stamped Concrete flooring – now offering
over 50 patterns in wide range of colors.
Colored concrete flooring – wide range of
color options.
SFRC jointless flooring – up to 40000 sq. ft.
Restoration of concrete floors – a solution
for every surface
Superflat Structural slabs
Restoration of concrete floors
Superflat Structural Slabs
AIR INDIA SATS, Bangalore Airport TR 34, FM-1 flooring
Call our project manager on +91-9911233099
Superflat Concrete Flooring
For Heavy duty industrial and warehouse floors
The floor flatness & durability is
fundamental performance requirement
and an important consideration in terms
of construction. The introduction of
higher rise forklift trucks and the VNA
(very narrow isle) trucks reaching heights
in excess of 12mtr. meant that greater
attention to flatness specification,
its achievement and measurement is
required.
We at BGSB, specializes in designing &
casting Industrial or warehouse Concrete
floor slabs as per fine tolerancesa
prescribed by IS 2571-1970 (reaffirmed 2006) & International standards
including: TR 34, DIN 15 185 & ASTM
1155.
BGSB’s mantra to achieve best results:
. An appropriate specification
. Operator skill
. Material selection
. Quality control procedures
. Supervision
. Management responsibilities
Our Technologies to achieve flatter floors:
Laser
Screedsaver
Machine: The laser
Screedsaver has an
automatic laser control
system that ensures
accurate level finish
through the use of
electronic remote controlled hydraulics. Unlike most walk
behind models Screedsaver comes with telescopic boom
extension arm which does not allows machine to go inside
the concrete ensuring best in class results. This machine
allows to achieve tolerance level of FM2 as per TR34
standards and capable of delivering 30,000 Sq.Ft Per day.
Automatic Truss
Screed:
This machine has an
automatic hydraulic
controlled movement
system that ensures
very consistent finish all
over the slab. It is also
equipped with vibrator
which ensures consistent compaction and vibration in all
areas. The width of slab can be extended up to 50 feet
using different extension modules. This machine can be
put to use where required tolerance is “Superflat” as per
TR34 standards.
Call our project manager on +91-9911233099
Colored concrete
flooring:
BGSB specializes in casting colored concrete floors
using variety of product options. It includes integral
color options, acid staining and colored hardener
toppings. It is a value added option to increase
aesthetics of floor without compromising on durability
and structural strength of slab.
Color Options
Superflat Concrete Flooring
For Heavy duty industrial and warehouse floors
Uni screed system:
This small machine is best for small areas where none
of the above machines can be used due to their size
limitation. Such areas are usually seen to be neglected
by other agencies in terms of flatness and quality.
Therefore,
this
machine
helps in
achieving
high
flatness
results at
those small
but critical
areas. It
features
consistent vibration and compaction as our other
models do with its powerful gas based engine.
Benefits of BGSB’s unique flooring systems:
1. High coverage rate per day – up to 30,000 Sq.Ft
2. Large panel size – up to 15,000 Sq.Ft per Laser
screed machine.
3. Highly Economical – if life span of flooring is
considered.
4. Durable flooring option – in comparison to VDF/
TREMIX flooring.
5. Jointless SFRC flooring option – only possible through
Laser screed system.
6. Accurate flatness – can achieve up to TR34,
“Superflat” category with Truss screed system.
7. Highly compressed – up to 1200 pounds of hydraulic
downforce using Laser screed system
Call our project manager on +91-9911233099
Polished Concrete
tm
An Eco Living Floor
BGSB as licensed applicator of Polished Concrete
Pvt. Ltd - Australia, now offers the signature
treatment in India, best suited for Industrial
Units, Retail outlets and warehousing facilities
with outstanding warranty of 10 years.
BGSB’s unique Polished Concrete System
eliminates the need of continually replacing the
floor coverings thus making it value for money
proposition. The Polished concrete flooring is also
becoming the preferred choice of those looking for
ultimate NO WAX / EPOXY flooring options.
Procedure details:
Moreover, no special acid agents are required in order
to prepare the surface. The initial preparation consists
of 5 to 7 steps of surface grinding. This is done in order
to achieve a dense surface as top surface of concrete
is often found to be dusty, soft and porous.Polishing
with resin diamond grids up to 3000 grit subsequently
follows this procedure. Additionally, based on specific
requirements, Lithium silicate based Nano liquid floor
hardeners and penetrating surface densifiers are also
used for arriving at the right sheen and highly increased
surface abrasion resistance. As per the International
studies the top surface abrasion resistance is
increased by at least 5 times.
Call our project manager on +91-9911233099
Polished Concrete
tm
An Eco Living Floor
Fact file:
a] In unpolished concrete, tiny particles of dust are
pushed to the surface through an upward force. This
can be termed as concrete dusting. Dusting may force
epoxies and other commonly used floor toppings and
sealers off of the surface of concrete floors, and can
lead to high cost of maintenance for industrial floors.
b] The polished concrete treatment acts as shield to
prevent water, oil, grease and other deicing chemicals
from penetrating into the surface making it ideal choice
for industrial floors and heavy duty floors.
c] Almost any concrete slab can be polished, regardless
of its age. There are many reasons for concrete
industrial floors to wear as they age: water logging
damage, surface pressure, de-lamination, improper
curing, curled cold joints, joint shoulder failure to name
few. BGSB’s signature process of polishing concrete
actually grinds the top surface of the old / affected
concrete floor, including any unleveled areas with divots
or holes, and densifies the exposed surface beneath.
Aged concrete is strengthened, with its impact and
abrasion resistance increased.
d] Polished concrete system increases the surface
reflectivity which in turn reduces the requirement of
lighting needs within your facility which helps in saving
the energy bills by at least 30%.
e] Polished Concrete flooring meets, and at times,
exceeds all international standards for slip resistance. If
regularly mopped and cleaned, polished concrete floors
will prove to be much less slippery than sealed or waxed
floors.
f] Increased life of truck tires - most industrial floors
have curling joints, from where the concrete bows
upward on the edges during concrete curing. After the
application of grinding & polishing on the affected areas,
it will level the curl joints and make the entire surface
smooth, helping tires last much longer.
g] Polished concrete floors can last as long as the slab
exists, whether that be fifty or one hundred years.
With very minimal maintenance and mopping schedule,
polished concrete provide savings over short and long
term.
h] Polished concrete is 100% green flooring option
because it drastically reduces the use of different floor
topping, coverings or coatings over a given slab on
a project, which on the other leads to land-fills upon
their eventual replacement. It also reduces the energy
requirements by at least 30%. In addition signature
system of polishing not only upholds aesthetically
pleasing design but also aligns with the LEED rating
system and contributes to LEED points.
Call our project manager on +91-9911233099
Stamped Concrete
Stamped concrete is cast-in-place concrete
flooring & paving system that adds a
distinctive architectural touch to any project,
together with the durability to stand up to
the toughest traffic loads and environmental
conditions.
Stamped concrete floor provides virtually
limitless palette of colors, textures, and
patterns - at a fraction of the cost of
traditional materials. It gives you more than
100 patterns and custom tooling options with
a wide variety of standard and custom coloring
options. You can choose from many natural
textures including slate, granite, limestone,
sandstone, cobble stone and used brick.
Fact file:
Tiles, paving blocks, and cobble stone, etc look great,
but since they form a surface of many interlocking
pieces, they are susceptible to frost-heave and other
changes in the underlying surface.
Reinforcing steel bars within the stamped concrete
help to tie the pavement together and strengthen it.
Also, bricks, pavers, cobbles, etc. allow for weed to
grow up through the cracks. Since stamped concrete
is a solid, continuous surface, nothing can grow up
through the ‘cracks’. As you may already know, the
‘cracks’ in stamped concrete are simply impressions
in the concrete that only partially go through the
surface.
Call our project manager on +91-9911233099
Concrete floor Restoration...
Rejuvenation redefined
BGSB’s signature restoration system can be
opted for treatment of all kinds of failed areas
including:
Regardless of the condition of your floor,
BGSB offers range of restoration solutions
including:
a]
b]
c]
d]
e]
f]
a] Polished Concrete system – with course
grind option
b] Self level toppings – with rapid drying
technology
c] Micro concrete toppings – to achieve all
new look.
Shrinkage & settlement cracks
Color fading of Acid stained floors.
Discolored patches
Dusting of surface
Curled joints
Exposed expansion joints
Before Restoration
After Restoration
Before Restoration
After Restoration
Floor Restoration in progress
Best Price, Walmart, Amritsar
Call our project manager on +91-9911233099