1. No category

Mohamed A. Naiem Abdel-Mooty, Ph.D.
Professor of Structural Analysis and Mechanics
Department of Structural Engineering,
Faculty of Engineering, Cairo University, Egypt
Phone: Home 202 33365582
Mobile 010 2597105
E-Mail: mamooty@aucegypt.edu
________________________________________________________________________
PERSONAL INFORMATION
Date of Birth:
Marital Status:
Nationality:
November 18, 1960, Cairo
Married, three children
Egyptian
EDUCATION
Ph.D., Structural Engineering, University of Waterloo, Canada, 1992
Thesis: Practical Aspects of Active Structural Control
M.Sc., Structural Engineering, Civil Engineering Department, Cairo University,
Egypt, 1985
Thesis: Vibrations of Curved Timoshenko Beams on Elastic Foundations
B.Sc.
Civil Engineering (Honors), Cairo University, Egypt, 1982.
ACADEMIC AND PROFESSIONAL MEMBERSHIP
Member, International Scientific Advising Committee for the International
Conference on Structures Under Shock and Impact, Wissex Institute of
Technology, UK (SUSI 2012, SUSI 2014, and SUSI 2016).
Member, International Scientific Advising Committee for the International
Conference on High Performance Structures and Materials, Wissex Institute of
Technology, UK (2008).
Member, Supreme Technical Council of the General Authority of the High Dam
and she Aswan Dam, Arab Republic of Egypt.
Member, Egyptian Code Committee on Blast Resistant Building Design
Member, Egyptian Code Committee on Design Loads on Bridges
Member, Egyptian Code Committee on Bridge Joints and Bearings Details
Member, Egyptian Engineers Syndicate
Professional Structural Engineer, Egypt
ACADEMIC EXPERIENCE
2005 - present
Professor of structural Analysis and Mechanics, Faculty of
Engineering, Cairo University
2005 - 2011
Professor, Department of Construction and Architectural
Engineering, The American University in Cairo. (on leave from
Cairo University)
1999-2005
Associate Professor, Structural Engineering
Faculty of Engineering, Cairo University
2001 - 2005
Visiting Associate Professor, Part-Time, Department of
Construction Engineering, The American University in Cairo.
2000 - 2001
Visiting Associate Professor, Full-Time, Department of
Construction Engineering, The American University in Cairo.
1995 - 1999
Assistant Professor, Structural Engineering Department, Faculty
of Engineering, Cairo University
1993 - 1995
Researcher, Institute for Research in Construction, National
Research Council Canada, Ottawa, Canada
1992 - 1993
Lecturer, Civil engineering Department, University of Waterloo,
Canada
1987 - 1992
Teaching Assistant, Civil engineering Department, University of
Waterloo, Canada
1982 - 1985
Assistant Lecturer, Structural Engineering Department, Faculty
of Engineering, Cairo University
1982 - 1985
Teaching Assistant, Structural Engineering Department, Faculty
of Engineering, Cairo University
Department,
COURSES TAUGHT:
Cairo University
Course Title
Class
Structural Analysis and Mechanics
Structural Analysis and Mechanics
Structural Analysis and Mechanics
Structural Dynamics
Theory of Structures
Structural Analysis I (STRN101)
Structural Analysis II (STRN102)
Martix Structural Analysis (STRN305)
Structural Systems and Optimization (STRN308)
Structural Design and Surveying (CVEN302)
English Technical Writing
Structural Dynamics (STR 601)
Seismic Structural Analysis (STR 614)
Seismic Design of Civil Structures (STR 709)
Repair and Upgrading Existing and Historic Buildings
1st Year Civil Eng.
2nd Year Civil Eng.
3rd Year Civil Eng.
4th Year Civil Eng.
1st Arch. Eng.
1st Year Struc.Eng. (STE)
1st Year Struc.Eng. (STE)
3rd Year Struc.Eng. (STE)
3rd Year Struc.Eng. (STE)
3rd Year Arch. Eng. (AET)
4th Year Civil Eng.
Graduate Structural Eng.
Graduate Structural Eng.
Graduate Structural Eng.
Graduate Structural Eng.
English Technical Writing (STR 682)
Graduate Structural Eng.
The American University in Cairo
ENGR 212: Engineering Mechanics (Statics)
CENG 301: Structural Analysis
CENG 302: Structural Analysis I
CENG 303: Structural Analysis II
CENG 307: Structural Design of Concrete and Steel
CENG 428: Tall Buildings and Large Span Structures
CENG 426: Concrete and Steel Bridges
CENG 452: Structural Systems & Advanced Design
CENG 454: Structural Mechanics
CENG 497: Engineering Ethics and Practical Training
CENG 592: Structural Stability
CENG 577: Finite Elements Method
CENG 592: Structural Vibration, Measurement,
Identification and Control
CENG 592: Blast Resistant Building Design
1st Year Engineering
3rd Year Const. Eng.
3rd Year Const. Eng.
3rd Year Const. Eng.
3rd Year Const. Eng.
4th Year Const. Eng.
4th Year Const. Eng.
4th Year Const. Eng.
4th Year Const. Eng.
4th Year Const. Eng.
Graduate Const. Eng.
Graduate Const. Eng.
Graduate Const. Eng.
Graduate Const. Eng.
University of Waterloo, Canada (Spring 1992 – Spring 1993)
Course Title
Class
Structural Steel Design
Advanced Structural Analysis
3rd Year Civil Eng.
4th Year Civil Eng.
GRADUATE THESES SUPERVISED:
Thesis Title/Subject
Candidate
Thesis
Progressive collapse of RC frames
W. El Sayed
Ph.D.
ongoing
Cairo
Blast resistance of RC strengthened masonry
S. Alhayawy
Ph.D.
ongoing
Cairo
Seismic performance of nonstructural elements E. Mahmoud
M.Sc.
ongoing
Cairo
Precast sandwich structures
M. Haggag
M.Sc.
ongoing
AUC
A. Saad
M.Sc.
2014
AUC
H. Bayoumy
M.Sc.
2014
AUC
A proposed segmented precast concrete spherical cap:
geometry, structural stability and construction
M. Kenawy
M.Sc.
2014
AUC
M. Moddather Ph.D.
2013
Cairo
Experimental and numerical investigation of the
seismic behavior of ICF screen grid walls
Y. Elmaghraby Ph.D.
2013
AUC
Progressive collapse analysis of RC building
frames with different seismic design levels
M.Sc.
2012
AUC
M.S.c.
2012
AUC
Using natural frequency in developing an
efficient damage identification technique
Experimental investigation of the behavior of
two-way concrete panels under impact loading
Cyclic behavior of beam-bracing-CFT column
connections in concentrically braced frames
M. Foda
Strengthening of lightweight autoclaved aerated
concrete masonry wall using ferrocement
A. Hendam
Use of expanded polystyrene in developing solid
Year University
and hollow block masonry units
Y. Ali
M.Sc.
2011
AUC
Nonlinear modeling of RC panels subjected
to lmpact loads
S. Shaaban
M.Sc.
2011
AUC
Finite element dynamic study on large framed
foundation of steam turbine generator
M. Ibrahim
M.Sc.
2011
AUC
Behavior of stone masonry walls under vertical
loads
M.Y. Tahawy
M.Sc.
2010
Cairo
Analysis of blast loading effects on steel
corrugated sheets façade system
M.Sc.
2010
Cairo
A comparative study of seismic provisions between
IBC and UBC applied to industrial buildings
S. Abdelmonem M.Sc.
2009
AUC
Experimental investigation of RC beams response
to impact and short duration loads
H. Cherif
M.Sc.
2009
AUC
N. Abu Elkassem Ph.D.
2009
Cairo
Dynamic analysis of highway bridges due to
moving vehicles
A.M.Shawki
The interaction between structural damage and added
dampers as energy dissipation mechanisms
H. T. Hassan
Ph.D
2008 Damascus
An investigation of earthquake induced pounding
between adjacent buildings
H. Atriby
M.Sc.
2008
Cairo
Seismic upgrading of RC columns using
advanced composite materials
A. Bitar
Ph.D.
2006
Cairo
M.Y Tahawy
M.Sc.
2006
Cairo
Identification of dynamic parameters for lightly damped
structural systems using inverse analysis
A. Anwar
M.Sc.
2005
Cairo
Development and evaluation of lime mortar for
restoration of historic buildings and monuments
T. Mahfouz
M.Sc.
2005
AUC
Damage detection in structures using measured
dynamic characteristics
A. Hashad
Ph.D.
2004
Cairo
Structural evaluation methodology for existing
concrete buildings
M.Sc.
2004
Cairo
Experimental and theoretical evaluation of seismic
response of historical stone walls
S.Abdo
Ph.D.
2003
Cairo
Flexural strengthening of RC beams
using CFRP
A. Thabet
Ph.D.
2003
Cairo
A. Bitar
M.Sc.
2001
Cairo
Viscoelastic dampers for vibration control of
irregular buildings under seismic loads
H. Hassan
M.Sc.
2001
Cairo
System identification of bridges
using experimental modal analysis
A. Hashad
M.Sc.
2000
Cairo
1999
Cairo
Structural behavior and modeling of stone
masonry wall with lime based mortar
Seismic behavior of eccentric RC
beam/column connection
Behavior of masonry-infilled RC frames
under seismic loads
A. Gergis
S. AbdelGawad PhD
RESEARCH AND TEACHNIG GRANTS:
2008 - 2012
Research team member, Funded Research Grant by King
Abdullah University of Science and Technology (KAUST) on
“Integrated Desert Building Technology”. The research aims at
developing a sustainable building system suitable for desert
environment that conserves energy, generate energy, and
suitable for building in deserts. The aspects of the projects also
cover sustainability, conservation and reuse of building
materials and water as well as life cost cycle optimization.
2009 - 2010
AUC research grant on “Retrofitting and upgrading building
façade to resist impact and blast loads”
2008 - 2009
AUC research grant on “Dynamic Response of Building Façade
to Blast Simulated Loads: Phase II - performance evaluation”
2007 - 2008
AUC research grant on “Dynamic Response of Building Façade
to Blast Simulated Loads: Phase I - Test Set-up”
2005 - 2008
Research team member on “Using Measured Ambient Vibration
Response for Predicting the Seismic Behavior of Important and
Historic Buildings and Evaluating the Most Suitable Scheme for
Repair and Upgrading” A research funded by the Academy for
Scientific Research and Technology, Egypt.
2005 - 2008
Research team member on “Evaluation of Structural Behavior of
Existing Bridges and Concrete Buildings under the Effect of
Earthquake Forces” A research funded by the Academy for
Scientific Research and Technology, Egypt.
2000 – 2001
Teaching enhancement grant for “Development of Small-Scale
Structural Models for Illustrating Fundamental Structural and
Mechanics Concepts to Engineering Students” American
University in Cairo
2000 – 2003
AUC research grant for “Development and Evaluation of Lime
Mortars for Restoration of Historic Buildings and Monuments”
American University in Cairo. A fund for this research was
granted and a M.Sc. Thesis was prepared and awarded on this
topic by AUC.
1994 – 1995
Research grant from National Research Council Canada for
development of Fiber-Optic sensors for fatigue crack monitoring
of steel bridges with application to Champlain Bridge in
Montreal.
UNIVERSITY SERVICE:
2014 – 2015
Director of Quality Assurance and Accreditation Unit (Credit
Hours Programs), Faculty of Engineering, Cairo University
2009 – 2010
AUC Construction Engineering Department Committee for
reaccreditation by Supreme Council of Egyptian University.
2007 - 2008
Chairman, AUC Construction Engineering
Committee for ABET reaccreditation.
Department
2007 – 2008
Member,
AUC
Construction
Engineering
Department
Committee for introduction of specialization in Construction
Engineering Program at AUC.
2006 – 2007
Member, AUC School of Science and Engineering Academic
Planning Committee for the Development and Introduction of
Architectural Engineering Program.
1996 – 2000
Assistant Editor, The Journal of Engineering and Applied
Science, Faculty of Engineering, Cairo University
2000 – 2001
Student Advisor, Construction
American University in Cairo.
1998 – 2002
Member of Control Committee for undergraduate student
grades for department of Mechanical, Aviation and Space
Engineering, Cairo University.
1996 – 1999
Member of the Board of Directors of the Egyptian Society of
Earthquake Engineering, Faculty of Engineering, Cairo
University.
1995 – 1996
Member of Committee for developing seismic instrumentation
Laboratory, Faculty of Engineering, Cairo University.
Engineering
Department,
PRACTICAL DESIGN EXPERIENCE
1996 – present
EGEC – House of Expertise, Giza, Egypt
Structural Concrete and Steel Design, Principal.
1995 - 1996
Middle East for Engineering consultation, Giza, Egypt
Structural Concrete and Steel Design
1993 -1995
National Research Council Canada, Ottawa, Canada,
Researcher, and Structural Engineering Consultant
1987 - 1993
Civil Engineering Department, University of Waterloo, Canada
Researcher in the area of Structural Dynamics and Vibration
Control, and Non-Destructive Testing
1982 - 1987
Nasr, Gaafar, H. Hosny and later Gather of Consultants Offices,
Egypt.
FIELDS OF STRUCTURAL DESIGN EXPERIENCE
Seismic design
High rise building design
Industrial steel structures
Elevated and ground water tanks
Elevated roads and bridges
Evaluation of existing buildings and ancient structures
SELECTED PROJECTS
-
Emaar Square, New Cairo, Egypt, Structural design of project
components: Hotels, recreation centers, multi-use buildings,
residential, cinemas and theatres, hypermarket (2012-present).
-
Bridges Structural design and shop drawings, of five intersection
interchange bridges/Tunnel in Dammam, Saudi Arabia 2009 – present
-
Jubail Industrial College, Jubail, KSA, (2010-2011)
Grand Egyptian Museum, Giza, In House Consultant for the
Ministry of Cultures, Design Management and Design Review
(2006-2010).
-
Cairo International Airport, Terminal Building 3 (2005),
structural designs review, detailed design and shop drawing.
-
Al Baker Executive Twin Towers, Doha, Qatar (2007-present)
-
The Learning Center, Education City, Doha, Qatar, Structural
Design (2007).
-
El-Ghaith Tower Structural Design of 55 Floor residential
Building, Doha, Qatar (2007)
-
El-Baker Tower Structural Design of 45 Floor residential
Building, Doha, Qatar (2006)
-
Sahara Tower Structural Design of 30 Floor residential Building,
Doha, Qatar (2006)
-
LAFAN Tower Structural Design of 35 Floor Office Building,
Doha, Qatar (2006)
-
Amarante El-Nile Hotel, Cairo. Structural Upgrading of the old
El-Nile Hotel to a five stars hotel involving major changes in the
structural systems (2004).
-
Pfizer Egypt – New Oral Solid Drug Production Plant,
Project Value U$ 40 Million (2004)
-
Historic buildings in Old Cairo: Structural repair and
restoration of the Leaning Minaret of El-Emary and Sabeel
Prince Mohamed (2002)
-
Tumor Institute New Building, Nasser Institute, Cairo (2002)
-
ASPPC Special Petroleum Products Plant, Alexandria (2001)
-
AMOC Gas-Oil Production Maximization, Alexandria (2001)
-
ARADO, Arab Administrative Development
Building, Heleopolice, Cairo (2001)
-
Rushdi Tower, a 20 story high rise building in down town Cairo,
structural repair and strengthening of the columns and
foundations (2000).
-
Sinai Cement Factory, El Areesh, North Sinai design review
and construction supervision (2000)
-
Grain Silos and Flour Mill, Saleef Port, Yemen, detailed design
(1999)
-
Culverts and Road Bridges, Reviera Resort, Taba, Sinai
detailed design (2000)
-
Faculty of Commerce Administrative Building and Lecture
Halls, Tanta University - Tanta - Egypt (1996)
-
Faculty of Arts Theater and Lecture Halls, Tanta University Kafr El-Shiekh - Egypt (1996)
Organization
-
Champlain Bridge, Struc. evaluation, Fatigue Assessment, and
Monitoring of Champlain Bridge (multi-span steel truss bridge
with orthotropic deck) - Montreal - Canada (1995)
-
Structural Evaluation of several existing Heritage Buildings Ottawa - Canada (1994)
-
Structural design of prestressed concrete bridges and elevated
roads - Mecca - Saudi Arabia (1986)
-
Structural design of El-Kalifa El-Maamoun high-rise - Heleopolis
- Egypt (1986)
-
Structural design of Borg El-Zagazeeg 23 story high-rise
concrete building - Zagazeeg - Egypt (1985)
-
Structural design and detailing of American Embassy Tower Cairo - Egypt (1985)
COURSES AND SEMINARS ATTENDED
Strong Motion Accelerograph for Vibration
and Seismic Recording
Kinemetrics, Cairo (5 d)
Microsoft Project
Murray Axmith, Ottawa (3 d) 1994
Project Management
Lemmex. Ltd, Ottawa (4d)
Effective Business Presentations
Belanger Pullen., Ottawa (3d) 1993
Business Communication
Achieve Gr. Inc, Ottawa (3 d) 1993
1996
1993
AWARDS
Faculty of Engineering Merit Scholarship, Univ. of Waterloo, 1988-1992
Research Assistantship, University of Waterloo, 1987-1992
Teaching Assistantship, University of Waterloo, 1987-1992
Best Tutor, Student Association Civil Engineering, University of Waterloo, 1988
Faculty of Engineering, Cairo University, First Honors, 1982
Egyptian Government Scholarship, 1977-1982
SELECTED PUBLICATIONS
1. M.M. Hassan, H.M. Ramadan, M. Abdel-Mooty, S. Mourad, (2014) “Experimental and
Numerical Study of One-Sided Branch Plate-to-Circular Hollow Section Connections,
Journal of Steel and Composite Structures, 2015, 19(4),
2. M.M. Hassan, H.M. Ramadan, M. Naeem, S. Mourad, (2014) “Behavior of gusset plateto-CCFT connections with different configurations”, Steel and Composite Structures,
Vol. 17, No. 5 (2014) 735-751
3. Hassan, M.M., Ramadan, H.M., Abdel-Mooty, M.N., Mourad, S.A., (2014) “Behavior of
Concentrically Loaded CFT Braces Connections,” Journal of Advanced Research
(2014), 5 (2), 243-252.
4. Mohamed Abdel-Mooty, Sayed Alhayawei, and Mohamed Issa (2014), “Numerical
evaluation of the performance of two-way RC panels under blast loads”, SUSI 2014,
Structures Under Shock and Impact 3-5 June, 2014, New Forest, UK, pp. 13-25.
5. Sayed A. Alhayawei, Mohamed A.N. Abdel-Mooty, and Mohamed E. Issa (2014)
“Numerical evaluation of the performance of one-way axially loaded masonry walls
under blast loads”, 6th International Conference on Protection of Structures against
Hazards, 16-17 October 2014, Tianjin, China.
6. Waleed El Sayed, Mohamed A.N. Abdel-Mooty, and Mohamed E. Issa (2014)
“Experimental Evaluation of the performance of RC frames in resisting progressive
collapse”, 6th International Conference on Protection of Structures against Hazards, 1617 October 2014, Tianjin, China.
7. Mohamed A.N. Abdel-Mooty (2013) “Experimental evaluation of the response of
ferrocement strengthened lightweight masonry walls to impact loads” SEMC 2013, The
Fifth International Conference on Structural Engineering, Mechanics and Computation,
2-4 September 2013, Cape Town, South Africa.
8. Mohamed Abdel-Mooty, Ayman Thabit, and Ezzat Fahmy (2013) “Innovative
Technique for Damage Identification in Beams Using Frequency Sensitivity Functions”,
Sixth International Conference on Structural Health Monitoring of Intelligent
Infrastructure (SHMII-6), 9-11 December 2013, Hong Kong, China
9. Mohamed A.N. Abdel-Mooty, Mohamed S. El Kashif, (2013) “Experimental Evaluation
of RC Sandwich Panels with Lightweight Infill in Shear”, International Conference on
Civil, Architectural and Building Engineering, Copenhagen, 13-14 June 2013
10. Hassan, M.M., Ramadan, H., Abdel-Mooty, M. and Mourad, S.A. (2012) “Experimental
Study of CFT Bracing Connections Behavior under Half Cyclic Loading,” 11th
International Conference on Steel, Space and Composite Structures, 12-14 December
2012, Qingdao, China.
11. Abdel-Mooty, M. and Shaaban, S. (2012) “Nonlinear Impact Response of RC Façade
Panels on Elasto-Plastic Supports,” 5th International Conference on Protection of
Structures Against Hasards, 15-16 November 2012, Singapore.
12. Abdel-Mooty, M. (2012) “Damage Identification in Continuous Structures Using Free
Vibration Characteristics” 10th World Congress on Computational Mechanics, 8-13 July,
2012, Sao Paulo, Brazil.
13. Abdel-Mooty, M. and Shaaban, S. (2012) “Nonlinear Dynamic Response of RC
Building Façade Panels to Impact Loads” 12th International Conference on Structures
Under Shock and Impact, 4-6 September 2012, Kos, Greece. WIT Transactions on the
Built Environment, Vol. 126, Structures Under Shock and Impact XII, pp. 281-291.
14. Abdel-Mooty, M. N, Mirhom, J. M., Hafez, H. T., Ibrahim, K. N., and J. R. Shaker
(2012) “Progressive Collapse Analysis of High-rise Building Considering the Effect of
Outrigger-Belt Lateral Load Resisting System” 12th International Conference on
Structures Under Shock and Impact, 4-6 September 2012, Kos, Greece. WIT
Transactions on the Built Environment, Vol. 126, Structures Under Shock and Impact
XII, pp. 293-302.
15. Abdel-Mooty, M., Al Kashif, M., Fahmy, E., Abou Zeid, M., and Haroun, M. (2012)
“Flexural and Shear Behavior of Composite Concrete Sandwich Panels with Autoclaved
Aerated Concrete Infill” AES-ATEMA’ 2012 Tenth International Conference on Advances
and Trends in Engineering Materials and their Applications, Montreal, CANADA, June
18 – 22, 2012.
16. Abdel-Mooty, M., Hendam, A., Fahmy, E., Abou Zeid, M., and Haroun, M. (2012)
“Experimental Evaluation of Lightweight AAC Masonry Wall Prisms with Ferrocement
Layers in Compression and Flexure” CEABM 2012, International Conference on Civil
Engineering, Architecture and Building Materials, , 25-27 May, 2012, Yantai, China.
Journal of Applied Mechanics and Materials, Vols 166-169 Progress in Structures
(2012), pp 1730-1735, (2012) Trans Publications, Switzerlans, doi: 10.4028/
www.scientific.net/ AMM.166-169.1730.
17. Abdel-Mooty, M., Al Kashif, M., Fahmy, E., Abou Zeid, M., and Haroun, M. (2012)
“Reinforced Concrete Sandwich Panels with Autoclaved Aerated Concrete Infill” 2012
International Conference on Innovation and Technology for Sustainable Built
Environment (ICITSBE 2012), 16-17 April 2012, Perak, MALAYSIA. Ref No.: Ct-06.
18. Al-Kashif M., Abdel-Mooty M., Fahmy E., Abou Zeid M., Haroun M. (2012) “Nonlinear
Modeling and Analysis of AAC in-filled sandwich panels for out of plane loads,” ICCET
2012 : International Conference on Concrete Engineering and Technology, Venice, Italy,
April 11-13, 2012.
19. M. Abdel-Mooty, A. Al Attar, and M. El Tahawy (2011) “'Experimental evaluation of
stone masonry walls with lime based mortar under vertical loads” The 12th International
Conference on Studies, Repairs and Maintenance of Heritage Architecture (STREMAH),
September 5-7, 2011, Chianciano-Terme, Italy.
20. M. Abdel-Mooty, M. El-Kashef, E. Fahmy, M. Abou-Zeid, and M. Haroun, (2011)
“Nonlinear Modeling of Autoclaved Aerated Concrete Masonry Wall Strengthened Using
Ferrocement Sandwich Structure,” 6th International Structural Engineering and
Construction Conference - Modern Methods and Advances in Structural Engineering
and Construction, Zurich, Switzerland, June 21-26, 2011, Ed. By S.O. Cheung, S.
Yazdani, N. Ghafoori, and A Singh, pp. 911-916.
21. Ezzat H. Fahmy, Youmna Ali, Mohamed N. Abou-Zeid, Mohamed Abdel-Mooty,
Medhat Haroun, and Yousry B. Shaheen (2011), “Use of Expanded Polystyrene Wastes
for Production of Lightweight Mortar Mixes,” 2nd International Engineering Mechanics
and Materials Specialty Conference, to be held on June 14-17, 2011, Ottawa, Canada.
22. El-Maghraby, Y., Haroun, M., Abdel-Mooty, M., Fahmy, E., Abou-Zeid, M., and ElKashef, M. (2011), “ICF Walls Resistance to Simulated Seismic Loads,” Engineering
Mechanics Institute Conference (EMI2011), 2-4 June, 2011, Boston USA.
23. Y. El-Maghraby, M. Haroun, M. Abdel-Mooty, E. Fahmy, M. Abou-Zeid, and M. Salama,
(2011) “Effect of Opening Size in RC Screen Grid Walls on Energy Efficiency and
Strength Capacity of ICF Building System,” The International Conference on
Sustainable Systems and the Environment, American University in Sharjah, Sharjah,
UAE, March 23-24, 2011.
24. Abdel-Mooty, M., Haroun, M., El-Maghraby, Y., Fahmy, E., and Abou-Zeid, M., (2011).
“Performance of Screen Grid Insulating Concrete Form Walls under Combined In-plane
Vertical and Lateral Loads,” Journal of Advanced Materials Research Vol. 163-167
Advances in Structures (2011) pp 1803-1801. Also presented at the International
Conference on Structures and Building Materials to be held in January 7-9, 2011
Guangzouh, China. Also published in
25. Abdel-Mooty, M.N. and Shaaban, S.M. (2010). “Numerical Modeling and Calibration of
Impact Testing of Reinforced Concrete Panels,” The Tenth International Conference on
Computational Structures Technology (CST), Valencia, Spain 14-17 Sept. 2010.
26. Haroun, M., El-Maghraby, Y., Abdel-Mooty, M., Fahmy, E., and Abou-Zeid, M. (2010),
“Experimental Evaluation of Insulating Concrete Form Walls under Lateral Loads,”
Proceeding of the ASCE, Engineering Mechanics Institute EMI conference, Los
Angeles, California, 8-11August, 2010.
27. Abdel-Mooty, M.N., Hasan, H., Al-Hassan, A. (2010). “Seismic Energy Dissipation in
RC buildings through both Structural Damage and Added Dampers” 5th World
Conference on Structural Control and Monitoring (5WCSCM), Tokyo, Japan, 12–14 July
2010.
28. Haroun, M., Abdel-Mooty, M., Saleh, M., Fahmy, E., and Abou-Zeid, M. (2010).
“Structural Enhancement of Autoclaved Aerated Concrete Masonry Wall using
Ferrocement Sandwich Structure” The Eighteenth Annual International Conference on
COMPOSITES/NANO ENGINEERING (ICCE - 18), ICCE-18, Anchorage, Alaska,USA,
July 4-10, 2010
29. Abdel-Mooty, M.N., Fahmy, E., Abu-Zeid, M., Saleh, M., and Haroun M. (2010).
“Seismic Strengthening of Lightweight Masonry Wall Panels using Ferrocement
Layers,” 13th International Conference STRUCTURAL FAULTS + REPAIR 2010, 15th17th June 2010, Edinburgh, Scotland.
30. Abdel-Mooty, M.N. (2010). “Experimental Evaluation of Retrofitted Building Façade in
Resisting Impact Loads,” 13th International Conference STRUCTURAL FAULTS +
REPAIR 2006, 15th-17th June 2010, Edinburgh, Scotland.
31. Al Atrpy, H., Abdel-Mooty, M., and Ghoneim M. (2010). “Investigation of Seismic
Pounding of Adjacent Multi-story Reinforced Concrete Buildings,” 9th US National and
10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 25-27 July
2010.
32. Al Atrpy, H., Abdel-Mooty, M.N., and Ghoneim M. (2010), “A Code Comparative Study
on Seismic Pounding of Adjacent Buildings with Applications,” 9th US National and 10th
Canadian Conference on Earthquake Engineering, Toronto, Canada, 25-27 July 2010.
33. Abdel-Mooty, M.N., Elshazly, H. A., Anwar, A. M. (2009). “Experimental Identification of
Dynamic Parameters for Steel Beams by Inverse Analysis,” International Journal of
Inverse Problems in Science and Engineering (IPSE), Vol. 17, No. 1, pp. 3-15, 2009.
34. Abu Elkassem, N.Z., Abdel-Mooty, M.A., Murad, S.A. (2009). “Dynamic Response of
Highway Bridges to Moving Vehicles Considering Higher Modes,” Journal of
Engineering and Applied Sciences, Faculty of Engineering, Cairo University, Vol. 56,
No. 1, Feb. 2009, pp. 21-38.
35. Hassan, A., El Hassan, A., Abdel-Mooty, M. “Testing of Model of Exterior R.C. BeamColumn Connection Under Cyclic Loads,” Damascus University Journal, (2009)
36. M. Abdel-Mooty, N. Abu Elkasem, and S. Mourad (2009) “Impact load factor for
highway bridges considering bridge-vehicle interaction,” Int. Conference on
Computational Design in Engineering CODE2009, November 3-6, 2009, Seoul, South
Korea.
37. M. Abdel-Mooty, H. Al Atrpy and M. Ghoneim (2009) “Modeling and Analysis of Factors
Affecting Seismic Pounding of Adjacent Multi-storey Buildings” ERES, Cyprus, 11-13
May 2009.
38. M. Abdel-Mooty, S. Khedr and T. Mahfouz (2009) “Evaluation of Lime Mortars for
Repair of Historic Structures,” 11th Int. Conf. on Structural Repairs and Maintenance of
Heritage Architecture, 22-24 July, 2009, Tallinn, Estonia.
39. Abdel-Mooty, M.N., Elshazly, H. A., Anwar, A. M. (2007). “Experimental Identification of
Dynamic Parameters for Steel Beams by Inverse Analysis,” Inverse Problems, Design
and Optimization Symposium (IPDO-2007), Miami, Florida,U.S.A., April 16-18, 2007.
40. Elshazly, H. A., Anwar, A. M., Abdel-Mooty, M.N. (2007). “Refined Identification of
Damage in Steel Beams by Inverse Analysis”, Inverse Problems, Design and
Optimization Symposium (IPDO-2007), Miami, Florida,U.S.A., April 16-18, 2007
41. Zaki, M.A., Abdel-Mooty, M.N., and Mourad, S.A. (2006). “Evaluation of the Dynamic
Characteristics of the Cairo Aquifer Wall” 1st International Conference on Restoration of
Heritage Masonry Structures, Cairo, Egypt, April 24-27, 2006.
42. Abdel-Mooty, M.A.N., Issa, M.E., Farag, H.M., and Bitar, M.A. (2006). “ Seismic
upgrading of square and rectangular RC columns using FRP wrapping” Third
International Conference on High Performance Structures and Materials, 3-5 May 2006,
Ostend, Belgium, C.A. Brebbia (Ed.), WIT press, pp. 419-428.
43. Bitar, M.A., Farag, H.M., Issa, M.E., and Abdel-Mooty, M.A.N. (2006). “Experimental
testing and numerical modeling of RC rectangular columns upgraded using FRP
wrapping” 6th International Conference on Civil and Architecture Engineering ICCAE-6,
May 16-18, 2006, Cairo Egypt.
44. Abdel-Mooty, M.A.N. and Abdel-Gawad, A.A. (2006) “Structural Evaluation and
Restoration of the Leaning Minaret of El-Emary in Old Cairo,” 11th International
Conference STRUCTURAL FAULTS + REPAIR 2006, 13th-15th June 2006, Edinburgh,
Scotland.
45. Abdel-Mooty, M.A.N., Issa, M.E., Farag, H.M. and Bitar, M.A. (2006), “Numerical
Modelling of Seismic Upgrading of Rectangular RC Columns using FRP Wrapping”
11th International Conference STRUCTURAL FAULTS + REPAIR 2006, 13th-15th June
2006, Edinburgh, Scotland.
46. Abdel-Mooty, M.N. (2005) “Dynamic Response Of Flexible Panel To Blast Loads”
Engineering Research Journal, Helwan University, Cairo, Vol. 98, April, pp. c26-c45.
47. Abdel-Mooty, M.N., and Abdo, S.M. (2004) “Structural Behavior of Natural Stone
Masonry Walls Under Vertical and Lateral Loads,” International Conference on Future
Vision and Challenges for Urban Development, Cairo, Egypt, 20-22 December 2004.
48. Abdel-Mooty, M.N., Anwar, M., and Hashad, A.S. (2004) “Locating Damage in BridgeLike Structures Using Vibration Modes Nodal Points Shifts,” in Proceedings of the Third
Egyptian Conference on Earthquake Engineering, EGYQUAKE 3, Cairo, Egypt, 6-8
December 2004.
49. Abdel-Mooty, M.N., and Hashad, A.S. (2004) “Detection of Damage Level and Location
in Structures Using Measured Natural Frequencies,” in Proceedings of the seventh
International Conference on Computational Structures Technology, Lisbon, Portugal, 79 September 2004, B.H.V. Topping and C.A. Mota Soares, (Editors), Civil-Comp Press,
Stirling, United Kingdom, paper 245, 2004.
50. Abdel-Mooty, M.N., and Hassan, H.T. (2004) “Effect of Added Viscoelastic Dampers on
Siesmic Response of Regular and Irregular Buildings,” Engineering Research Journal,
Helwan University, Cairo, Vol. 92, April, pp. c108-c127.
51. Abdo, S.M, and Abdel-Mooty, M.N. (2003) “Behavior of Natural Stone Masonry Prisms
Under Axial Compression,” Civil Engineering Research Magazine, Al-Azhar University,
Volume 25, No. 3, Oct. 2003, pp. 1482-1497.
52. Aly, S.A.G. and Abdel-Mooty, M.A.N. (2003), “Effect of CFRP Strips on Flexural
Strengthening of RC Beams,” Proceedings of the Ninth Arab Structural Engineering
Conference, Nov. 29 – Dec. 1, 2003, Abu Dhabi, United Arab Emirates, Vol 1.
53. Abdel-Mooty, M.N. (2002), “Dynamic Modeling and Identification of Discontinuous and
Locally Damaged Beams,” Proceedings of the Third World Conference on Structural
Control, 7-12 April 2002, Como, Italy, Fabio Casciati (Ed.), John Wiley & Sons, Ltd,
West Sussex, England, Vol. 3, pp. 679-686.
54. Salah El Deen, O.A., Essa, M.E., Abdel-Mooty, M.N., Aly, S.A.G., Farid, A.T. (2002),
“Flexural Behavior of RC Beams with and without Openings strengthened Using
CFRP,” Proceeding of the Conference on Structural Composites for Infrastructural
Application, December 17-20, 2002, Aswan, Egypt.
55. Abdel-Mooty, M.N. (2000), “Evaluation Criteria for Existing Structures,” Proceedings of
the Eighth Arab Structural Engineering Conference, 21-23 October 2000, Vol. 4, pp.
1945-1953.
56. Mourad, S.A., Abdel-Mooty, M.N., Haggag, H.A., and Hashad, A.S. (2000), “System
Identification of Bridges Using Experimental Modal Analysis Techniques,” Proceedings
of the Eighth Arab Structural Engineering Conference, 21-23 October 2000, Vol. 1, pp.
211-222.
57. Abdel-Mooty, M.N., Abdel-Gawad, S., Shaheen, H.H., and Issa, M.E. (1999),
“Experimental Evaluation of Cyclic Behavior of Masonry Infilled R.C. Frames with and
Without Openings,” Journal of Engineering and Applied Science, Cairo University, Vol.
46, April 1999, pp. 217-236.
58. Abdel-Mooty, M.N., Mourad, S.A., and Abdel-Gawad, A.A. (1998), “Structural
Adequacy, Damage Assessment, and Repair Methodology of Historical Walls,” Arab
Conference for Strengthening and Rehabilitation of Structures, September 16-17, 1998,
Cairo, Egypt, Vol. 2, pp. 1041-1057.
59. Mourad, S.A., Abdel-Mooty, M.N., and Abdel-Gawad, A.A. (1998), “Structural
Evaluation and Restoration of Historical Buildings,” Arab Conference for Strengthening
and Rehabilitation of Structures, September 16-17, 1998, Cairo, Egypt, Vol. 2, pp. 907922.
60. Abdel-Mooty, M.N. (1998), “Buckling of Elastically Supported and Braced Columns
with Arbitrary Boundary Conditions,” Journal of Engineering and Applied Science, Cairo
University, Vol. 45, No. 5, Oct. 1998, pp. 693-708. Also presented at the 8th
International Colloquium on Structural and Geotechnical Engineering, Ain Shams
University, December 15-17, 1998, Cairo, Egypt, Vol. 1, pp. I83-I94.
61. Abdel-Mooty, M.N. (1997), “Active Jointed Structures,” Proc. Seventh Arab Structural
Engineering Conference, 24-26 November, 1997, Kuwait, pp. 667-676.
62. Abdel-Mooty, M.N. (1996), “Fatigue Crack Detection and Warning System in Steel
Bridge Elements,” Proc. Seventh International Colloquium on Structural and
Geotechnical Engineering, 17-19 December, 1996, Ain Shams University, Cairo, Egypt,
Vol. 3, pp. 63-72.
63. Abdel-Mooty, M.N., and Kingsley, C.Y. (1996), “Fiber-Optics Technology for
Assessment of Concrete Structures,” Cairo First International Conference on Concrete
Structures, Cairo University, pp. 9-60 – 9-73.
64. Abdel-Mooty, M.N., Mohamed, E.H., and Haddad, J. (1996), “Fiber-Optics for
Evaluation of Pavement Reinforcement Materials in Resisting Reflection Cracking,”
Transportation Research Record No. 1536, TRB, Washington, D.C., pp. 140-145.
65. Abdel-Mooty, M.N., Rainer, J.H., and Rahman, A.H. (1995), “Fiber-Optics for
Monitoring of Structures,” 1995 Annual Conference of the Canadian Society for Civil
Engineering, June 1-3, 1995, Ottawa, Ontario, Vol. 4, pp. 395-402.
66. Abdel-Mooty, M.N., Roorda, J. (1994), “Issues of Control Robustness in Active
Structural Control,” First World Conference on Structural Control, 3-5 August, 1994, Los
Angeles, California, USA, pp. WA1-43 – WA1-52
67. Abdel-Mooty, M.N., (1994), “Free Flexural Vibration Analysis of One-Way Stiffened
Plates by the Free Interface Modal Synthesis Method: Discussion,” Canadian Journal of
Civil Engineering, Vol. 21, No. 1, pp. 167-168.
68. Abdel-Mooty, M.N., and Roorda, J. (1994), “Optimal Configuration of Active-Control
Mechanisms,” ASCE, Journal of Engineering Mechanics, Vol. 120, No. 3, pp. 535-556.
69. Abdel-Mooty, M.N., and Roorda, J. (1992), “Vibration Control of Large Span
Structures,” IASS-CSCE International Congress 1992 on Innovative Large Span
Structures, Toronto, Canada, Vol. 1, pp. 428-439.
70. Abdel-Mooty, M.N., and Roorda, J. (1991), “Experiments in Active Control of Structural
Vibrations,” 1991 Annual Conference of the Canadian Society for Civil Engineering, May
29-31, 1991, Vancouver, British Columbia,
71. Abdel-Mooty, M.N., and Roorda, J. (1991), “Optimal Control Configuration for Active
Control of Structural Vibrations,” Proc. ASCE Engineering Mechanics Conference on
‘Mechanics Computing in 1990’s and Beyond’, Columbus, Ohio, May 20-22,1991, Vol.
2, pp.761-765.
72. Abdel-Mooty, M.N., and Roorda, J. (1991), “Time-Delay Compensation in Active
Damping of Structures,” ASCE, Journal of Engineering Mechanics, Vol. 117, No. 11, pp.
2549-2570.
73. Abdel-Mooty, M.N., and Roorda, J. (1991), “Free Vibrations of Continuous Beams with
Singularities in Inertia and Stiffness Distribution,” Dynamics and Stability of Systems, An
International Journal, Oxford University press, Vol. 6, No. 1, pp. 1-16.
74. Abdel-Mooty, M.N., and Roorda, J. (1990), “Dynamic Analysis of Continuous Beams
with Singularities in Mass and Stiffness Distribution,” Proc. 8th International Modal
Analysis Conference, SEM, Kissimmee, Florida, USA, January 29-February 1, 1990,
Vol. 1, pp. 55-61.
75. Issa, M.S., Nasr, M.E., and Abdel-Mooty, M.A.Naiem (1990), “Free Vibrations of
Curved Timoshenko Beams on Pasternak Foundations,” International Journal of Solids
and Structures, Vol. 26, No. 11, pp. 1243-1252.
76. Issa, M.E., Nasr, M.E., and Abdel-Mooty, M.A.Naiem (1986), “Free Out-of-Plane
Vibrations of Continuous Curved Timoshenko Beams,” First Egyptian (Arab) Structural
Engineering Conference, Cairo, Egypt, Vol. 1, pp. I/151-I/168.