1. No category

Release Notes - Océ ProCut 4.2 - Features
Highlights – New features
1.
2.
3.
4.
Enhanced nesting
Stability improvements
Improved MAC client
Updated Media profiles
1. Enhanced nesting
•
•
•
Improved nesting algorithm that gives a better optimized result at a faster speed in
comparison to previous ProCut versions.
“Pre-nesting “ / “background auto nesting” is default disabled (even that media nesting
setting should be enabled).
Utilizing full nesting area in width or height with margin set to zero. This allows the
operator to nest edge-to-edge in either width or height of a the material.
The first job will be placed according to margin settings only and not according to
margin+distance as for previous ProCut versions.
Nesting definition settings:
•
April, 2015
Optimized placements of register marks and barcodes to save space.
When Auto barcode placement is selected, then the barcodes will be placed inside the
center marks on the longest axis only.
R4 - Public
When selecting Top, Bottom, Left and Right, then barcodes are placed like this:
•
Short-cut to Edit Media settings from Nesting Queue
Right hand click on Media.
April, 2015
R4 - Public
•
Enhanced nesting of open curves
ProCut creates a closed path surrounding all objects within a job. This path is offset 0,5mm
outside and used as basis for true-shape nesting.
Certain designs still require operator editing and manual joining / deleting of curve
segments to work or they nest based on the bounding box.
Example of CAD designs with open lines that nest well:
2. Stability improvements
•
Improved communication between ProCut Server and Clients to avoid crashing the Server.
3. Improved MAC client
•
•
April, 2015
Support for Mac OS X Yosemite (version 10.10).
MAC client now displays thumbnails in Job Queue and Nesting Queue with multiple file
selections.
R4 - Public
•
•
Pin/unpin multiple jobs at the same time possible.
Area calculation in nesting now same as Windows Client.
4. Updated Media profiles
April, 2015
•
New standard sheet sizes, defined to match Océ Arizona flatbed vacuum zones, are now
default with each media profile. This is convenient to automatically cut remnants (left-over
media) in a board size that is optimal for the Arizona workflow.
•
All media profiles have the following default settings:
R4 - Public
April, 2015
R4 - Public