ygma yon July 20th 2007 TRANSITION FROM V4 TO V6 How to Proceed This process is very important as V4 and V6 are not compatible on a software point of view BE CAREFUL YOU CANNOT READ V4 DAGS WITH UPDATED V6 EQUIPMENT STEP 1 : MAKE THE DIFFERENCE BETWEEN V4 AND V6 DAGs Disposable V4 DAG Bibs Disposable V6 DAG Bib - Backward Paper is white - Antenna cable is red - Chip is either in middle (on the left) or in the right lower corner (on the right), - Backwards paper is yellow - Antenna cable is blue - Chip is in the right lower corner PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 1/6 ygma yon Reusable V4 Bib Disposable V4 DAG Bibs - Backward Paper is white - Antenna cable is red - Chip is either in middle (on the left) or in the right lower corner (on the right), - Backwards paper is the same - Antenna cable is blue - Chip is in the right lower corner V4 DAG Chip V6 DAG Chip Antenna Cable is grey Antenna Cable is blue PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 2/6 ygma yon STEP 2 : CHECK YOUR EQUIPMENT COMPATIBILITY FOR V6 USE 1- First versions of tuning boxes (silver boxes) cannot be used and must be changed to V13 and V14 Old tuning Box version New V13 and V14 Tuning box version NO YES To recognise an old version of tuning box, it is easy : it measures only 6,3*11,3 cm compared to V13 and V14 valid versions : 9*11,5 cm 2- The use of DAG Prog device is compulsory If you need to buy any of this device, please contact your sales representative or write to : sport@dagsystem.com All your other equipments are compatible but need to be updated with the new software versions. PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 3/6 ygma yon STEP 3 UPGRADE YOUR EQUIPMENT VERSIONS TO V6 1 – Reminder : The Blackbox is composed of an intelligence and one or two long range readers. The file for the intelligence is of “.MHX” type, the file for the reader is of “HEX” type. To update these elements we need : the tools “update_mhx” and “updates_hex” + the files to install with those extensions. The Badger is composed of an intelligence and one short range reader. The file for the intelligence is of “.MHX” type, the file for the reader is of “HEX” type. To update these elements we need : the tools “update_mhx” and “update_hex” + the files to install with those extensions. The DAG Prog is a short range reader and communicates through USB; To install a DAG Prog you must install the USB Driver, to update it only you need : the tools “update_hex” + the file to install with this extension. Device Tool Files Type Blackbox Intelligence Blackbox Long Range readers Blackbox transition Badgeur Intelligence Badgeur Shortrange Reader DAG Prog update_mhx_file update_hex_file Transition V4-V6 update_mhx_file update_hex_file update_hex_file MHX HEX MHX HEX HEX Current Versions 505c 112d6 6.18a 101c60 102c 60 You will need to upgrade all your blackboxes, badgeurs and DAG Progs Versions for V6 : - SetDAG = SetDAG 7.04 and above - WinDAG 9.6.35 and above - BlackBox version : 505c and above - Reader version : 112d6 - Badgeur : 6.18a and above + 101c60 - DAG Prog : 102c 60 We will guide you through the steps here and with your CD. We advise you to PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 4/6 V6 ygma 1234- yon install all the tools (“update”) (in total 3 tools) copy all the files .MHX and.HEX required (in total 6 files) print all the documentations (in total 6 different) follow step by step all the indications, do not miss any action 2- Time required : total : 1hour 15 mins - tools installation and files copying : 5 Mins - Documentation printing : 5 mins - updating 1 BB with MHX and HEX : 30 mins - transition BB : 20 Mins - updating 1 Badgeur with MHX and HEX : 10 mins - updating DAG Prog : 5 mins WE ADVISE YOU TO GO THROUGH THIS PROCESS AT LEAST ONE WEEK BEFORE YOUR FIRST V6 RACE IN ORDER TO HAVE TIME TO CONTACT YOUR SALES REPRESENTATIVE IN CASE YOU HAVE ANY DOUBT OR PROBLEM; 3- Upgrade your Blackbox, refer to the “Update Blackbox” a. Update your Blackbox intelligence with the latest V6 intelligence (MHX file, 505c at the date of the present document) b. Update your Blackbox readers with the latest V6 reader version (HEX file 112d60 at the date of the present document). You need to do this on each reader if you have a BB4 c. Set up and run the transition software provided on the transition CD and follow the “Transition Procedure Guide” d. Do not forget to send us the file (“.mig”) that confirms your change The file confirms the process: « Transition V4 -> V6 1.01 le 05/07/2007 11:52:26 Version IB BB III V 504 a Numéro de série IB 0609-0072 IB11 Type horloge IB 0 Version lecteur : 2 112b60 Version lecteur : 1 112b60 Etape 1 lecteur : 2 OK Etape 1 lecteur : 1 OK Etape 2 lecteur : 1 OK Etape 2 lecteur : 2 OK Etape 3 lecteur : 1 OK Etape 3 lecteur : 2 OK Etape 4 lecteur : 1 OK Etape 4 lecteur : 2 OK Etape 5 lecteur : 1 OK Etape 5 lecteur : 2 OK Lecteur 1 OK Lecteur 2 OK” 5- Upgrade your Badgeurs, refer to the “Update Badger” PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 5/6 ygma yon a. install the latest intelligence version (MHX file 6.18a at the date of the present document) b. install the latestV6 short range reader version (MHX file, 101c60 at the date of the present document) c. check your versions in the Sysop Menu 6- Updateyour DAG Prog : install the latestV6 short range reader version (MHX file, 102c60 at the date of the present document) 7- TEST WITH THE V6 DAG TEST PROVIDES IN YOUR UPDATE KIT STEP 4- SET UP THE LAST VERSIONS OF OPERATING SOFTWARES 1- Install WinDAG and discover the new functions 2- Install SetDAG and discover the new functions All required versions and explanations are on the CD we send you as well as on the extranet. You can consult your sales representative if you do not have an access yet. DAG System can provide Online assistance; please check the availabilities and conditions with your sales representative. PYGMALYON S.A. – DAG System 66 rue Louis Becker – 69100 Villeurbanne Tél. : 04 78 03 21 21 - Fax : 04 78 68 86 86 - Web : www.dag-system.com Capital 440 000 Euros - RCS Lyon B 388 293 441 6/6
© Copyright 2024