How To configure UCxIAD-FXO Gateway to operate with UCx
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
How To configure
UCxIAD-FXO Gateway to
operate with UCx
This document contains E-MetroTel confidential information and is provided for the internal business use of
our partners. This document shall not be disclosed to any third party without the express written consent of
E-MetroTel.
Property of E-Metrotel 2014.
10-Jun-2014
Page 1 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Table of Contents
Setting up the UCx Server _______________________________________________________________ 3
Access the UCx Web-Based Configuration Utility ____________________________________________ 3
Create a trunk _______________________________________________________________________ 3
Create an Outbound Route _____________________________________________________________ 4
Create an Inbound Route ______________________________________________________________ 5
Gateway Setup Procedure _______________________________________________________________ 7
Access the Gateway Management Interface ________________________________________________ 7
Upgrade the Firmware _________________________________________________________________ 7
Configure the SIP Server _______________________________________________________________ 7
Configure the Ports ___________________________________________________________________ 9
Configure the Outbound Route _________________________________________________________ 10
Configure the Inbound Route __________________________________________________________ 10
Configure Advanced Options ___________________________________________________________ 11
___________________________________________________________________________________ 13
10-Jun-2014
Page 2 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Setting up the UCx Server
Access the UCx Web-Based Configuration Utility
From a browser, enter the IP address of the UCX server . The IP address can be changed by the customer,
for this example, we have used the default IP address 192.168.1.200.
Type the administrator username and password into the Username and Password fields. Press Enter or
click on the Submit button.
Create a trunk
Click on the PBX tab on the menu at the top of the screen, fTrunks.
Select Add SIP Trunk from the list.
10-Jun-2014
Page 3 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
On the Add SIP Trunk page, enter the following information:
Trunk name ("fxo-gateway" in this example)
Maximum Channels ("8" in this example)
Under Outgoing Settings , enter the following information:
Trunk Name ("fxo-gateway" in this example)
PEER Details parameters as per screenshot below where the host value should be the ip address of
your FXO gateway ("192.168.30.141" in this example)
Under Incoming Settings , enter the following information:
USER Context ("fxo-gateway_in" in this example)
USER Details parameters as per screenshot below where the host value should be the ip address of
your FXO gateway ("192.168.30.141" in this example)
Create an Outbound Route
From the left side column, select Outbound Routes to add or modify and existing outbound route
On the Outbound Routes page, fill in the following information:
Route name ("fxo" in this example)
10-Jun-2014
Page 4 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Set the dial rules, for this example we use the prefix "9"
Select the trunk that was created in Step 1.2.
Click Submit Changes to save the outbound route
Create an Inbound Route
From the left side column, select Inbound Routes to add or modify and existing inbound route
Configure inbound route on the Add Inbound Routes page, fill in the following information:
Description ("fxo-gateway" in this example)
DID Number ("s" in this example)
Configure the Destination for the inbound route, we have chosen a time condition for this example
10-Jun-2014
Page 5 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Click Submit to save the changes
Apply the configuration changes by clicking the pink Apply Config bar
10-Jun-2014
Page 6 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Gateway Setup Procedure
Access the Gateway Management Interface
Enter the IP address of the FXO GATEWAY from a browser window. The default IP address of the gateway
is 192.168.11.1, this can be changed by the customer. For our example, we have used the IP address
192.168.1.11.
Login using the default login credentials:
Username = admin
Password = admin
Upgrade the Firmware
Check the firmware version, in the example below, the firmware version is 1.18.02.06.
Obtain the latest firmware version by sending an email to support@emetrotel.com.
Upgrade the firmware by following the steps below:
Go to the Maintenance-> Firmware Upload page
Configure the SIP Server
10-Jun-2014
Page 7 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Go to the System Configuration -> SIP Server page and enter the following information:
SIP Server Address ( 192.168.1.200 in this example)
SIP Server Port ( 5060 in this example)
SIP Register Interval (1800s in this example)
Click Save
10-Jun-2014
Page 8 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Configure the Ports
Go to the Call Routing -> Port Group page and enter the following information:
Description
Primary Display Name
Primary SIP User ID
Offhook Auto-Dial ("s" in this example)
Note that "s" can be replaced by any DID number or character, it matches the DID number
configured in Step 12 (Inbound Route) on the UCX server.
10-Jun-2014
Page 9 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Configure the Outbound Route
Go to the Call & Routing > IP>Tel Routing page and enter the following information:
Description ("IP->Tel" in this example)
Configure the Inbound Route
Go to the Call & Routing > Tel>IP Routing page and enter the following information:
Calls from ("Port Group 7" in this example)
Description ("Tel->IP" in this example)
10-Jun-2014
Page 10 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
UCx 4 Update Space
Configure Advanced Options
Go to the Advanced-> FXS/FXO page and enable the following options:
Under the section "Incoming Call from PSTN", enable Send Original CID when Call from PSTN
Under the section "Outgoing Call to PSTN", enable One Stage Dialing
10-Jun-2014
Page 11 of 13
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
10-Jun-2014
Page 12 of 13
UCx 4 Update Space
Copyright © 2014 E-Metrotel
Global Inc.
How To configure UCxIAD-FXO Gateway to operate with
UCx
10-Jun-2014
Page 13 of 13
UCx 4 Update Space
Copyright © 2014 E-Metrotel
Global Inc.
© Copyright 2024