How to Install the Balanced Body Grid Wall ® ™

®
How to Install the Balanced Body Grid Wall™
PLEASE READ THESE INSTRUCTIONS COMPLETELY
PRIOR TO ASSEMBLING THE GRID WALL.
Important Mounting Note: The Balanced Body Grid Wall was designed
to mount to walls with 24” (61cm) wood studs. If you are planning
to mount this to walls with different spaced studs (or any other type
of construction), it is highly recommended that you have a qualified
installer assist you. Balanced Body is not responsible for damages
caused by incorrect installation.
WALL MOUNTING INSTRUCTIONS
Important Note: The Grid Wall is designed
for mounting on walls with 24” (61cm) wood
studs. Balanced Body is not responsible for
damages caused by incorrect installation.
Use the four pan head screws to mount the
Grid Wall to the wall as shown in Figure 2.
QUESTIONS?
PART LIST:
Use the list below to confirm all parts necessary for installation. If you
are missing a part, please contact our customer service department at
1-800-PILATES (U.S.) or +1-916-388-2838 (Int’l).
PART
NUMBER:
DESCRIPTION:
GW24
Chrome panel
1
607-231
Wooden frame
1
616-123
Frame Bracket A (left)
2
616-124
Frame Bracket B (right)
2
GEN9889
Button HD Screw
8
GEN9206
Flat washers
8
GEN9187
Propeller nuts (pre-installed)
8
GEN9282
Allen wrench/key
1
GEN9395
Pan head screws
4
620-046
S-Hooks
10
QTY:
Figure 2
Please call Balanced Body Technical Support at
1-800-PILATES (U.S.) or +1-916-388-2838 (International)
If you have a different type of wall construction, installation will
require specific equipment and fasteners. Alternative wall mounting
instructions are not included. It is recommended that the Grid Wall be
mounted by someone with knowledge of wall hanging installation.
© 2009 Balanced Body, Inc.
Figure 1 shows proper orientation for Grid Wall assembly. Align the
frame brackets with the pre-drilled holes on the wood frame. Please
make sure all the frame bracket hooks are facing upward, as the grid
panel will hang on the bracket hooks. Insert the Button HD Screw and
washers into the frame brackets. Tighten screws with provided Allen
wrench.
1. Chrome Panel
2. Button HD Screw
3. Washers
4. Frame Brackets
5. Wood Frame
6. Propeller Nuts (Pre-installed)
1
2
3
4
5
6
Figure 1
Contact Us
1-800-PILATES | +1-916-388-2838
pilates.com | info@pilates.com
400-176 | 01.31.13