How to Order and The Price
How to Order and The Price To make your RENAULT Twingo Renaultsport R1 / R2, there are the following three ways. Please select the most suitable way and we are very flexible so please do not hesitate to contact us. 1) Purchase complete car If you do not have a Twingo Renaultsport 133 Cup yet, this is the most simple and reliable way to obtain. -PriceR1: R2: Standard（Tarmac) spec. ￡26,500 Tarmac spec. ￡43,000 Gravel spec. * Prices are based on new donor car. R2 Evo: Tarmac spec. ￡49,900 Gravel spec. * Donor car is not required to make a R2 EVO. (except for registration) ￡47,000 ￡51,500 2) Modify your Twingo Renaultsport at MSE If you already have a Twingo Renaultsport 133 Cup, you can use it as a base car and bring it to Monster Sport Europe. Our experienced mechanics will modify your Twingo Renaultsport 133 Cup into a competitive vehicle. -Price- R1: Standard kit (Tarmac) + Modification ￡16,000 R2: Tarmac kit + Modification ￡32,500 Gravel kit + Modification ￡36,500 R2 Evo: This service is not available for R2 Evo 3) Build it yourself You can also build your Twingo Renaultsport R1/R2 car by yourself. You can purchase the kit from us. We will provide all necessary build infomation to you. -Price- R1: Standard kit (Tarmac) ￡ 8,300 R2: Tarmac kit ￡24,800 R2 Evo: Tarmac kit ￡42,350 Gravel conversion kit ￡ 2,050 Gravel kit ￡ 28,400 Gravel kit ￡ 43,900 * Donor car is not required to make a R2 EVO. (except for registration) * * * * VAT is not included in the price. Registration of the car, transportation and custom fee for export/import is not included in the price. Prices as of 1st of August 2012. Specs of product and prices are subject to change without prior notice. Production flow ※ In the case of 1) or 2) 1. Enquiry from customer Consultation with customer and decide together which spec and options are suitable. 2. Receive an order sheet Please fill necessary information in an attached order sheet, and send to us. At this point, the order will become official. 3. Payment request of 50% Firstly, we ask the customer to make payment of 50% of the total amount. 4. Start of production After receipt of first payment, Monster Sport Europe starts production. 5. Payment request rest of 50% One or two weeks before the end of production, we send the payment request of 50% of the total amount. 6. Production finishes and delivery Official RENAULTSport dealer Official Technical Partner of Twingo RENAULTSport Trophy UK Monster Sport Europe Ltd. 2 Danbury Court, Linfordwood, Milton Keynes, UK, MK14 6PL Tel: +44 (0) 1908 231170 Fax: +44 (0) 1908 232828 Web: www.monstersport-europe.com Customer Sales: Nicky Finlayson Mobile: +44 7747843840 Email: info@monstersport-europe.com TECHNICAL SPECIFICATIONS TWINGO RENAULT SPORT R1 CHASSIS Type TWINGO RENAULT SPORT R2 Steel monocoque with roll cage welded and bolted onto bodyshell with sleeves Steel monocoque with welded roll cage Steel Bodywork ENGINE Layout Type Bore x stroke Ignition Maximum power Maximum torque Max. engine speed TRANSMISSION Type Gearbox Gearshift Differential Clutch TWINGO RENAULT SPORT R2 EVO Production 98KW(133bhp) 160Nm at 4400rpm 7000rpm Front transversally-mounted Renault K4M RS - 4 cylinder - 16valve - 1598cc 79.5 x 80.5mm Built-in Magneti Marelli management system 118KW(160bhp) at 7000rpm 145KW(195bhp) at 7250rpm 180Nm at 5500rpm 200Nm at 6000rpm 7500rpm 8000rpm 5 speed gear box + reverse H shaped grille Open for short torque Production Front wheel drive Sequential 5speed gearbox + reverse Steering wheel mounted joystick ZF type, limited slip, auto locking differential Hydraulically controlled single disk AXLES AND SUSPENSION Front McPerson strut, one way adjustable Shock absorbers Programmed deflection, torsion beam Rear suspension with coil springs BRAKE McPherson strut, two way adjustable shock absorbers with hydraulic stop cup, adjustable camber settings Programmed deflection, torsion beam suspension with coil springs and two way adjustable shock absorbers Programmed deflection, torsion beam suspension with coil springs and two way adjustable shock absorbers with hydraulic stop cup, 280mm ventilated disks Front disk Single Piston Rear caliper Hand brake Single Piston Mechanical Length Wheelbase Track (front/rear) Fuel tank 1460 / 1430m m 4 Pistons 2 Pistons Hydraulic 3607mm 2368mm 1465 / 1445m m 40 L 1485 / 1455m m Ballasted to 1030kg (FIA regulation) Weight Rims 300mm ventilated disks 240mm solid disks Rear disk Font caliper DIMENSIONS,WEIGHT AND CAPACITIES WHEELS McPherson strut, two way adjustable shock absorbers, adjustable camber settings 6.5" x 15" aluminium wheels Gravel: 6.0" x 15" Tarmac: 6.5" x 16" aluminium wheels www.twingotrophy.co.uk Official RENAULTSport dealer Official Technical Partner of Twingo RENAULTSport Trophy UK Monster Sport Europe Ltd. 2 Danbury Court, Linfordwood, Milton Keynes, UK, MK14 6PL Tel: +44 (0) 1908 231170 Fax: +44 (0) 1908 232828 Web: www.monstersport-europe.com Customer Sales: Nicky Finlayson Mobile: +44 7747843840 Email: info@monstersport-europe.com
© Copyright 2024