Download Report

The Luxe
PRESENTATION CENTER
March 27, 2008
FIXTURE
TYPE
L1
L2
F1
FIXTURE DESCRIPTION
LOT (12) iColor Cove QL 12" LED fixture
(1)
Spds-60
ca 24v 24V
power
supplyLED
MAX
20 QL'S
LOT
(48) Tivoflex
Orange
Accent
lighting per foot
(8)
MOUNTING
CHANNEL 6.5' SECTION
LITO
SV4S128UNVPG
F2
LITO SM4S228UNVPG GEL BY OTHERS
T1
R1
R2
R3
R4
LITO 55006WH / 55055 WH / 55035 WH (3) 55241WH
R5
R6
STRIP
1
2
3
3a
4
12
2a
2a
5
LITELINE HV5S-HRO5-ICAT/HV5-TH5005 CL
DASAL 2-020-F-120 / 2-180-01
DASAL 2-020-F-120 / 2-120-01
LITELINE HV5S-HRO5-ICAT/HV5-TH5005 CL
DASAL 2-020-F-120 / 2-120-02 SA
DASAL 2-120-11/R12S/REMOTE LVT60
CFI SB148T-120 SO
MAXI MX3525-11 INC
DASAL 2-020-F-120 / 2-120-01
DASAL 2-020-F-120 / 2-120-01
WAITING FOR SPEC, WILL ADVISE ASAP CASH ALLOW
ROSETTE
DASAL 2-020-F-120 / 2-115-01-F
DASAL 514-050-01
DASAL LVT 60 120/12
LITO SV4S128UNVPG
i Color
Cove QL The iColor® Cove QL fixture is a low-profile LED cove light featuring Chromasic® technology. From
large-scale commercial installations to simpler residential applications, iColor Cove QL delivers colorchanging illumination and lighting effects to alcoves, task areas, accent areas, and other confined
spaces. Employing Chromasic technology, iColor Cove QL has the capability of auto-addressing,
which simplifies installation, addressing and programming.
Encased in a vented, molded plastic housing, iColor Cove QL is available in 6" (15cm) and 12"
(30cm) lengths with a 100º x 40º beam angle and features in-line power/data connectors that allow
a run to turn up to 180º, reducing installation time. The mounting bracket provides 180º aiming
rotation.
iColor Cove QL is driven by the Color Kinetics® Chromasic chip, which integrates power,
communication, and control. It therefore lowers the overall system cost, making it an affordable
alternative for edge and alcove lighting. Each one-foot fixture can be individually controlled or
grouped as one address for simplified installation.
Power and data are supplied by sPDS-60ca 24V, a dedicated Color Kinetics power/data supply
available for DMX and Ethernet applications, or PDS-60ca 24V for pre-programmed effects. Each
power/data supply supports up to 20 12" fixtures or 36 6" fixtures in a single run or divided into
two runs. End-to-end is the preferred method of installation. However, jumper cables are available for
areas that require spacing.
i C O L O R C O V E Q L s p ec i f i c at i o n s
color range
source
beam angle
housing
connectors
listings
64 billion (36 bit) additive RGB color, continuously variable intensity
High brightness LEDs
100° x 40°
Rigid, vented plastic housing.
12” L x 1.5” W x 1.4” H (30cm) x (6.8cm) x (3.5cm) (with base)
6” L x 1.5” W x 1.4” H (15cm) x (6.8cm) x (3.5cm) (with base)
Integral 3-pin male/female connectors
UL/cUL, CE
C O M M U NI C ATI O N s p ec i f i c at i o n s
data interface
control
Color Kinetics Chromasic data interface system
Color Kinetics line of controllers, including Light System Manager, Video
System Manager, or other DMX512 (RS485) sources
E L E C T R I C A L s p ec i f i c at i o n s
power requirement
power consumption
DRY
power supply
leader cable
jumper cable
ITEM# 101-000051-00 (12")
101-000051-01 (6")
This product is protected by one or more of the following
U.S. Patents and their foreign counterparts: 6,016,038,
6,150,774, 6,292,901, 6,340,868, 6,777,891,
6,788,011, 6,806,659, 6,969,954, and 6,975,079.
Other patents pending.
©2005-2007 Color Kinetics Incorporated. All rights reserved.
Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the
Color Kinetics logo, Color Kinetics The Leader in Intelligent
Light, ColorBlast, ColorBlaze, ColorBurst, ColorCast, ColorPlay,
ColorScape, DIMand, Direct Light, EssentialWhite, eW, iColor,
iColor Cove, IntelliWhite, iW, iPlayer, Light Without Limits,
Optibin, Powercore, QuickPlay, Sauce, the Sauce logo, and
Smartjuice are either registered trademarks or trademarks of
Color Kinetics Incorporated in the United States
and/or other countries.
All other brand or product names are trademarks
or registered trademarks of their respective owners.
BRO152 Rev 05
Specifications subject to change without notice. Refer to
www.colorkinetics.com for the most recent version.
24VDC
3W at full output for 12" fixture; 1.7W at full output for 6" fixture
sPDS-60ca 24V (Item# 109-000021-02) for DMX/Ethernet applications,
PDS-60ca 24V (Item# 109-000016-00) for Preprogrammed applications
30-ft (9m) iColor Cove EC Leader Cable (Item# 108-000015-00)
1-ft (0.3m) iColor Cove EC/QL Jumper Cable (Item# 108-000020-00)
5-ft (1.5m) iColor Cove EC/QL Jumper Cable (Item# 108-000020-01)
E n v i ro n me n ta l s p ec i f i c at i o n s
temperature range
-4˚F to 122˚F ( -20˚C to 50˚C) based on testing of specific product
LED Source Life
In traditional lamp sources, lifetime is defined as the point at which 50% of the lamps fail. This is also termed Mean
Time Between Failure [MTBF]. LEDs are semiconductor devices and have a much longer MTBF than conventional sources.
However, MTBF is not the only consideration in determining useful life. Color Kinetics uses the concept of useful light output
for rating source lifetimes. Like traditional sources, LED output degrades over time (lumen depreciation) and this is the metric
for SSL lifetime.
LED lumen depreciation is affectedAMERISIS
by numerous environmental
conditions CORP.
such as ambient temperature, humidity, and
LIGHTING
ventilation. Lumen depreciation is also affected by means of control, thermal management, current levels, and a host of other
LUXE
PRESENTATION
CENTER
electrical design considerations. Color Kinetics systems are expertly engineered to optimize LED life when used under normal
operating conditions. Lumen depreciation information is based on LED manufacturers’ source life data as well as other third
party testing. Low temperatures and controlled effects have a beneficial effect on lumen depreciation. Overall system lifetime
could vary substantially based on usage and the environment in which the system is installed.
TYPE
L1
Temperature and effects will affect lifetime. Color Kinetics rates product lifetime using lumen depreciation to 50% of original
DESC
LOT (12)
iColor
QL 12"
LEDis fixture
light output. When the fixture is running
at room temperature
using
a colorCove
wash effect,
the lifetime
in the range of 30,00050,000 hours. This is based on LED manufacturers’ test data. For more detailed information on source life, please see www.
(1)
Spds-60
ca
24v
power
supply
MAX
20 QL'S
colorkinetics.com/lifetime.
(2) 30' leader cable
(1) Colordial + power supply
*** No color player, color dial only ***
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA
Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • info@colorkinetics.com • www.colorkinetics.com
i Color
Cove QL 12"
photometric performance
Photometric data is based on test results from an independent testing lab.
source specifications
Optics: PMMA (Acrylic)
Source:
30 LEDs (10 Red, 10 Green, 10 Blue)
Beam Angle:
100° x 40° (at 50% of peak illuminance)
Distribution:
Asymmetric direct illumination
CCT:
Adjustable 1,000–10,000K
CRI:
Not measurable (CIE 13.3-1995)
illuminance distribution
0.3
2.2
0.3
3.2
0.4
4.3
0.3
3.2
0.2
2.2
0.1
1.1
0.4
0.6
4.3
1.6
17.2
2.1
22.6
1.5
16.1
0.5
5.4
0.2
candle power distribution
0.4
6.5
2.4
4.3
1.7
25.8
4.6
49.5
43.1
4.6
43.1
1.7
49.5
2.4
18.3
0.4
2.2
2.2
0.5
18.3
4.0
4.0
0.2
25.8
0.6
4.3
5.4
1.5
16.1
2.1
22.6
1.3
14.0
0.4
6.5
4.3
0
0.1
1.1
3.0’/1.0m
0.2
2.2
0.3
3.2
0.4
0’/0m
-90
90
4.3
7
0.3
3.2
0.2
2.2
3.0’/1.0m
Measured on:
Beam center:
Thin dashed lined:
Multipliers:
15
22
30
White
30 cd
Indicates 50% of peak
0.24 Red, 0.48 Green, 0.28 Blue
3.0’/1.0m
Units:
Location:
0’/0m
3.0’/1.0m
Footcandles (top)/Lux (bottom)
10.8 lux = 1 fc
Center of grid, 1’/0.3m from surface,
light at perpendicular to surface
Measured on: White, reflectance model: 50%
light output
Illuminance
distance
3’
1m
6’
9’
white
3.0
0.8
32.3
8.6
0.4
red
0.8
8.1
0.1
green
1.4
0.4
15.5
4.1
0.2
blue
0.8
9.0
0.1
2m
0.2
15’
3m
2.2
0.2
2.4
0.1
1.1
0.2
2.1
2.1
0.1
1.2
Measured in Footcandles (top)/Lux (bottom) on axis.
Measured on white, reflectance 0
efficacy
(watts)
(lm/w)
46
2.9
15.9
red
11.5
0.7
16.4
green
22.1
1.2
18.4
white
4.3
1.1
power
(lumens)
0.4
4.3
total output
color
5m
0.2
AMERISIS
LIGHTING
blue
12.9 CORP.
1.2
LUXE PRESENTATION CENTER
TYPE
DESC
10.7
Note: Efficacy figures are for a complete tested fixture L1
not simply a lamp source.
LOT (12) iColor Cove QL 12" LED fixture
(1) Spds-60 ca 24v power supply MAX 20 QL'S
(2) 30' leader cable
(1) Colordial + power supply
3 Burlington Woods Drive
Burlington,
MA 01803
• USA
***• No
color player,
color
dial only ***
Philips Solid-State Lighting Solutions •
Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • info@colorkinetics.com • www.colorkinetics.com
i Color
Cove QL 12"
physical dimensions
SIDE
END
Dia. 1.13”
(2.9 cm)
12.00”
(30.5 cm)
1.38”
(3.5 cm)
MOUNTING BRACKET
1.48”
(3.8 cm)
Dia. 0.17” (4.3 cm)
Countersink
Typ 2 places
BOTTOM
3.13”
(7.5 cm)
4.39”
(11.2 cm)
13.07”
(34.85 cm)
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
DESC
L1
LOT (12) iColor Cove QL 12" LED fixture
(1) Spds-60 ca 24v power supply MAX 20 QL'S
(2) 30' leader cable
(1) Colordial + power supply
*** No color player, color dial only ***
iColor Cove QL 12"
s p ec i f i c a t i o n s
data/power connector
power/data supply
Integral 3-pin male/female connectors
sPDS-60ca 24V (Item# 109-000021-02) for
DMX/Ethernet applications
PDS-60ca 24V (Item# 109-000016-00) for
Preprogrammed applications
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA
Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • info@colorkinetics.com • www.colorkinetics.com
i Color
Cove QL
functional flow diagram
iColor Cove QL Wiring with sPDS-60ca 24V (DMX/Ethernet)
iColor Cove QL Wiring with sPDS-60ca 24V
(DMX/Ethernet)
Maximum: 20 12” iColor Cove QL fixtures or
36 6” iColor Cove QL fixtures per power supply
(All on Output 1 or divided between Output 1 and Output 2)
Use with iColor Cove EC Leader Cable: 30-feet (9 m)
(Item# 108-000015-00)
ALT
OUT 2
OUT 1
Connect iColor Cove QL
end to end using the
inline connectors.
DMX OUT
ALT
DMX IN
DATA
ENET IN
OUT 2
DMX OUT
OUT 1
DMX IN
DMX OUT
DMX IN
ENET IN
DATA
sPDS-60ca 24V
Ethernet IN
Note: the iColor Cove EC leader cable is
connectorized to ensure faultless wiring.
Do not
modify, shorten,
or lengthen
the cable.
For complete installation
instructions
and safety
precautions,
refer to the iColor Cove QL User Guide
not remove
or replace the factory installed
and wiring diagramsDo
located
at www.colorkinetics.com/support.
connectors.
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
DESC
Power/Data Supply
Additional Items
PDS-60ca 24V (Item# 109-000016-00) or sPDS-60ca 24V (Item #109-000021-02)
Any Color Kinetics controller or DMX512 compatible controller
Controller
L1
30-ft (9-m) iColor Cove EC leader cable (Item# 108-000015-00)
LOT (12) iColor Cable
Cove QL 12" LED fixture
(0.3m) iColor Cove EC/QL jumper cable (Item# 108-000020-00)
(1) Spds-60 ca 24v power supply MAX1-foot
20 QL'S
5-ft (1.5m) iColor Cove EC/QL jumper cable (Item# 108-000020-01)
(2) 30' leader cable
(1) Colordial + power supply
*** No color player, color dial only ***
optibin®
There are inherent variations in the fabrication processes of all semiconductor materials. For LEDs, this variance results in differences in the color and intensity of light
output as well as electrical characteristics. Due to these differences, LED manufacturers sort production into “bins,” but insuring the availability of a single bin is very difficult. To minimize this issue and achieve optimal color consistency in its products, Color Kinetics has developed and uses a proprietary technology called Optibin. Optibin
is an advanced production binning optimization process that minimizes the effects of LED variance for the best possible output uniformity in the final product. Color
Kinetics Optibin technology gives the most consistent control of color and intensity from product to product.
Philips Solid-State Lighting Solutions • 3 Burlington Woods Drive • Burlington, MA 01803 • USA
Tel 888 FULL RGB • Tel 617 423 9999 • Fax 617 423 9998 • info@colorkinetics.com • www.colorkinetics.com
A patented, versatile, flexible LED light tubing
offering neon-like brightness and uniformity
of color and glow. Interior and exterior architectural delineation and unique designs.
TIVOFLEX
Accent Lighting
Features
• Available in 24V low-voltage system
(see chart for wattages)
• 60' maximum per circuit breaker
• Can save up to 70% in energy costs
over traditional glass neon
• Cool-to-touch, low-heat LEDs available
in Blue, Green, Orange, Red, White, Warm White,
Yellow
• LED life: 100,000 hours for Green, Orange, Red,
Yellow; 40,000-hours for Blue, White, Warm White
• LEDs spaced ½" apart emit light uniformly
• LEDs encased oval-shaped, flexible PVC lens
which is field-cuttable and bendable for breakage-free installations
• Lens is available in colored, clear or opaque
options:
– Clear lens is for brighter highlighting effects for
use with White or colored LEDs
– Colored lens available in Green, Orange Red,
Yellow and Blue to match LED colors for
consistent night and day color appearance
Minimum Bend Radius
– Opaque lens available for White and Warm
White LED colors
• Installs easily into channels or on flat or curved
surfaces like wood, plastic, steel, etc.
Convex bend to 4"
• Mounts into aluminum “U” channel
minimum radius
• Large variety of connectors for easy and
Concave bend to 6"
versatile in-field installation options
minimum radius
Profile
11/4"
7/8"
“U” channel
3/4"
11/16"
Listings
5/8"
• UL and CUL Listed
• IP65 Rated
• Rated for wet location
Energy Cost Comparison
Installation
TIVOFLEX vs. traditional glass neon
Tivoflex can save up to 70% or more in energy costs*
Annual Energy Cost
Brushed Aluminum
Mounting Channel
Powder Coated
Mounting Channel
REGION
GLASS NEON
TIVOFLEX
ANNUAL
SAVINGS
CUMULATIVE
SAVINGS
USA Midwest
$1,839.60
$605.40
$1,234.20
$12,342
AMERISIS
($0.08/kWh)
Tivoflex easily
installs into
Mounting Channel.
Channel mounts with
screws through base.
Lateral bend to 1"
minimum radius
LIGHTING CORP.
(over 10 years)
LUXE
PRESENTATION
CENTER
* Based on 300 feet 2.88W/ft. red LED. Energy savings are based on local costs per
kilowatt
hour, 24 hours/day,
TYPE
L2 365 days/year. Energy usage: traditional glass neon
– 8.75W/ft, TIVOFLEX – 1.44W/ft.
DESC
LOT (48) Tivoflex 24V Orange LED Accent lighting per foot
(8) MOUNTING CHANNEL 6.5' SECTION
Length Cutting Information
(2) END PERP POWER FEED INSTALLED IN FACTORY
Voltage
Color
Cut Length
(4) RIGHT ANGLE
CONNECTORS
INSTALLED IN FACTORY
24V
Green,
Blue,
White,
Warm
White
100W ELEC TRANSFORMER Every
1203"VAC/24VDC
24V
Tivoflex’s flexibility offers endless
possibilities for creative installations
1550 E. Saint Gertrude Place
Santa Ana, CA 92705
ph 714 957-6101
fx 714 427-3458
Red, Yellow, Orange
www.tivolilighting.com
info@tivolilighting.com
Every 4"
Copyright © 2007 Tivoli 6.28.07
TIVOFLEX
accent Lighting
tiVoFLeX ordering inFormation
DesCrIPtIon
Tivoflex
Colored Lens –
Low Voltage
(lens matches
LED color)
Tivoflex
Clear Lens –
Low Voltage
Tivoflex
Opaque Lens–
Low Voltage
Cat. no.
tVFl-r-24
tVFl-y-24
tVFl-o-24
tVFl-g-24
tVFl-B-24
tVFC-r-24
tVFC-y-24
tVFC-o-24
tVFC-g-24
tVFC-W-24
tVFC-WW-24
tVFC-B-24
tVFX-W-24
tVFX-WW-24
connections
leD Color Volts Watts
Red
24V 1.6W per
foot
Yellow
Orange
Green
24V 1.6W per
foot
Blue
Red
24V 1.6W per
foot
Yellow
Orange
Green
24V 1.6W per
foot
White
Warm White
Blue
White
24V 1.6W per
foot
Warm White
Splice Connector w/Shrink Tube
for tube-to-tube connections
24" Middle Connector
Jumper Cable
Pin Connector for tube-to-connector
or power supply connections
90° Inside Corner 90° Outside
Connector
Corner Connector
60' Rolls maximum. Specify end prep and cut length information
“T” Connector
end PreParations
Cat. no.
tVFX-ePa
tVFX-ePB
tVFX-ePC
tVFX-ePD
CorD length
5'
5'
5'
5'
180° Power Feed
90° Power Feed
End Cap/Dead End
Left-Down/RightUp Power Feed
DesCrIPtIon
Cat. no.
Low Voltage (24V) 180° Connector Power Feed Kit: (1-180° Molded Female
Power Connector w/ 5' Cord, 1 Male Pin, 1 End Cap, 1 Splice Connector)
Low Voltage (24V) 90° Connector Power Feed Kit: (1-90° Molded Female
Power Connector w/ 5' Cord, 1 Male Pin, 1 End Cap, 1 Splice Connector)
24V Power Feed – Left Down/Right Up
24V Power Feed – Right Down/Left Up
tVFX-CPC24-180
* Longer length cords available, consult factory
LoW-VoLtage transFormers
Cat. no.
Electronic Transformer with secondary short circuit protection Mt60122D
Electronic Transformer – 1-4 Amp Circuit Breaker
Jt100142D
Electronic Transformer – 3-4 Amp Circuit Breaker
Jt300342D
1550 E. Saint Gertrude Place
Santa Ana, CA 92705
DesCrIPtIon
Cat. no.
Aluminum Mounting “U” Channel – 6.5'
Length (Specify Brushed Aluminum or
Powder-Coat Finish)
End Cap for Dead End
Male Connector Pin (used with power feeds)
Splice Connector Pin
(used with tube-to-tube connections)
Shrink Tube – 2" x 3.25"
Splice Connector Kit
(3 Splice Connectors, 3 Shrink Tubes)
24" Middle Connector Jumper Cable with
Female Connectors Both Ends, 2 Male Pins
90° Inside Corner Connector, 2 Male Pins
90° Outside Corner Connector, 2 Male Pins
“L” Female Connector, 2 Male Pins
“X” Female Connector, 2 Male Pins
“T” Connector, 2 Male Pins
tVFX-Chan6.5
tVFX-enDCaP
tVFX-MC
tVFX-sC
tVFX-st
tVFX-sCK
tVFX-JC
tVFX-90-I
tVFX-90-o
tVFX-lC
tVFX-XC
tVFX-tC
LED technology is changing rapidly. LED’s are made in lots and
sorted into bins based on wavelength ranges that achieve colors. Products ordered at different times may not have the same
color appearance due to variations of up to 10% within lots.
tiVoFLeX PoWer Feed Kits
DesCrIPtIon
“L” Connector
tiVoFLeX connector comPonents
DesCrIPtIon
180° Power cord straight
90° Power cord rear entry
90° Left down / right up
90° Right down / left up
PoWer Feeds
Right-Down/LeftUp Power Feed
“X” Connector
tVFX-CPC24-90AMERISIS
LIGHTING CORP.
LUXE PRESENTATION CENTER
tVFX-CPC24lD/ru
TYPE
L2
tVFX-CPC24rD/lu
DESC
LOT (48) Tivoflex 24V Orange LED Accent lighting per foot
(8) MOUNTING CHANNEL 6.5' SECTION
(2) END PERP POWER FEED INSTALLED IN FACTORY
Wattage
Voltage
(4) RIGHT ANGLE CONNECTORS INSTALLED IN FACTORY
100W ELEC TRANSFORMER 120 VAC/24VDC
60W
120VAC/24VDC
100W
300W
ph 714 957-6101
fx 714 427-3458
120VAC/24VDC
120VAC/24VDC
www.tivolilighting.com
info@tivolilighting.com
Copyright © 2007 Tivoli 6.28.07
SV STRIP T5
STRIP T5
2" WIDE 1 3/8" DEEP
22", 34", 46" AND 92" LENGTHS
1 OR 2 LAMP, T5
Only 2" wide.
Utilizes compact, high efficency, T5 or T5HO lamps.
Fully enclosed wiring.
Optional white or specular, symmetric and assymmetric reflector.
Convenience outlet and switch K.O.s provided.
Push through lamp holders with rotor for secure
lamp retention.
Optional hangers and wires guards.
DIMENSIONS
FIXTURE TYPE
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
F1
JOB
INFORMATION:
DESC
CFI
SV4S 128 UNVPG
LAMP
1 X F28 T5 3000K
LOCATION
FI-0500-03
VOLTS
SV STRIP T5
STRIP T5
22", 34", 46” OR 92" LENGHTS
PHOTOMETRY
MODEL NO. SV4S228120PI
ORDERING INFORMATION
SV
4
STRIP
NOMINAL
Strip T5,
FIXTURE
2" wide X 1 3/8" deep
LENGTH
channel
2 = NOMINAL 22"
3 = NOMINAL 34"
4 = NOMINAL 46"
8 = NOMINAL 92"
S
CEILING TYPE
S = Surface
Explanation of Catalogue Number Example: SV4S228120PI
2
28
LAMP
LAMP TYPE
QUANTITY
(NOMINAL 22”)
IN A LUMINAIRE 14 = 14W T5
CROSS-SECTION 24 = 24W T5 HO
(NOMINAL 34”)
1 or 2
21 = 21W T5
39 = 39W T5 HO
(NOMINAL 46”)
28 = 28W T5
54 = 54W T5 HO
120
PI
VOLTAGE
UNV = 120/277V
120 = 120V
277 = 277V
347 = 347V
BALLAST TYPE
OPTIONS
PG = Electronic T5 Program Start
PI = Electronic T5 Instant Start
PF = T5 Power Spec Dimming*
*Not available in 347V.
OPTIONS/ACCESSORIES
STEM AND CANOPY SETS: Suspend luminaire
12", 18", 24", 36", or 48" from surface. (Two
per luminaire is recommended. For 34"
and 46" STB Strip only.) Catalogue number:
SV5F12 (12"); SV5F18 (18"); SV5F24 (24");
SV5F36 (36"); SV5F48 (48")
CHAIN HANGING KIT: Includes two 5' heavy duty link chains
with sturdy "V" hook for fixture suspension. (34" and 46" STB Strip
only.) Catalogue number: EE9HC
WIRE GUARD: Galvanized wire guard. Catalogue number:
FOR SV STRIP T5 34": SV5GXG3
FOR SV STRIP T5 46": SV5GXG4
REFLECTORS: Consult specification sheet (folio FI-0560-03 and
FI-0565-03)
RADIO INTERFERENCE FILTER: 120, 277 or 347 volt,
50 or 60 Hz. SUFFIX: R
ROCKER SWITCH: SUFFIX: H
CONVENIENCE OUTLET: SUFFIX: CO
BALLAST OPTIONS: For other ballast options, consult
ballast specification sheet (folio BA-1-02)
SPECIFICATIONS
MATERIALS: Chassis parts are die-formed heavy gauge cold rolled steel,
1 3/8" deep x 2" channel width.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte high reflectance paint finish.
ELECTRICAL: HPF, thermally protected class “P” ballast. If K.Os are within
LIGHTING
CORP.
3” of ballast use wireAMERISIS
suitable for at least
90C.
LABELS: Listed by
LUXE PRESENTATION CENTER
TYPE
F1
DESC
CFI SV4S 128 UNVPG
LAMP
1 X F28 T5 3000K
We reserve the right to change, materials and finish in any way that will not alter installed appearance
or reduce function and performance.
LOCATION
525 EDUCATION RD., CORNWALL, ONTARIO K6H 6C7
TEL.: (613) 938-6221 FAX: (613) 938-0961
SM STRIP T5
Page 1 of 2
SIDEMOUNT STRIP T5 2" WIDE 1 3/8" DEEP CHANNEL
22", 34", 46" and 92" LENGTHS 1 OR 2 LAMP, T5
Features
• Only 1 5/8" deep
• Utilizes compact, high efficency, T5 or T5HO lamps
• Fully enclosed wiring
• Convenience outlet and switch K.O.s provided
(1 lamp only)
• Convenience outlet and switch K.O.s provided
• Push through lamp holders with rotor for
Dimensions
92"
46”
34"
22”
A
92 1/4"
(2343mm)
46 1/8"
(1172mm)
C
D
90 3/16"
B
4 1/4"
44 7/16"
(2291mm)
( 108mm)
(1129mm)
44 1/16"
4 1/4"
21 3/8"
( 108mm)
( 543mm)
( 1119mm)
34 1/4"
32 3/16"
4 1/4"
( 870mm)
(818mm)
( 108mm)
22 7/16"
20 3/8"
4 1/4"
( 570mm)
( 518mm)
( 108mm)
N/A
N/A
Job Information
Type:
Job Name:
Cat. No.:
AMERISIS
Lamp(s):
LIGHTING CORP.
LUXE
PRESENTATION
CENTER
Volts/Ballast:
TYPE
F2
DESC
CFI SM4S 228 UNVPG
LAMP
1 X F28 T5 3000K
c.f.i. Fluorescent A Canlyte brand
525 Education
Road,
Cornwall,
Ontario,BY
Canada
K6H 6C7 - (613)
938-6221
LOCATION **GEL
OTHERS
***
We reserve the right to change details of design, materials and finish.
© 2006 Canlyte inc.
A0902 R10-19
www.canlyte.com
FLUORESCENT
Nom.Length
SM STRIP T5
Page 2 of 2
SIDEMOUNT STRIP T5 2" WIDE 1 3/8" DEEP CHANNEL
22", 34" OR 46" LENGTHS 1 OR 2 LAMP, T5
PHOTOMETRY
MODEL NO.
SM4S228120PI
Ordering Information Explanation of Catalogue Number Example: SM4S22812OPI
SM
4
SIDEMOUNT
STRIP
NOMINAL
FIXTURE
LENGTH
Sidemount Strip T5,
2" wide X 1 3/8" deep 2 = NOMINAL 22"
3 = NOMINAL 34"
channel
4 = NOMINAL 46"
S
2
28
120
PI
CEILING TYPE
S = Surface
LAMP
QUANTITY
LAMP TYPE
(NOMINAL 22”)
14= 14W T5
24= 24W T5 HO
(NOMINAL 34”)
21= 21W T5
39= 39W T5 HO
(NOMINAL 46”)
28= 28W T5
54= 54W T5 HO
VOLTAGE
UNV = 120/277V
120= 120V
277= 277V
347= 347V
BALLAST TYPE
1 or 2
OPTIONS
PG = Electronic T5 Program Start
PI = Electronic T5 Instant Start
PF = T5 Power Spec Dimming*
*Not available in 347V.
OPTIONS/ACCESSORIES
SPECIFICATIONS
MATERIALS: Chassis parts are die-formed heavy gauge cold rolled steel, 1 5/8" deep
x 2" channel width.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte high
reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube type). If
K.Os are within 3” of ballast use wire suitable for at least 90C. LABELS: Listed by CSA.
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
Job Information
Type:
TYPE
F2
c.f.i. Fluorescent A Canlyte brand
DESC
CFI SM4S
228 UNVPG
525 Education
Road, Cornwall,
Ontario, Canada
K6H 6C7 - (613) 938-6221
We reserve
the right to 1
change
details
design, materials and finish.
LAMP
X F28
T5of 3000K
© 2006 Canlyte inc.
LOCATION **GEL
BY OTHERSR10-19
**
A0902 www.canlyte.com
FLUORESCENT
RADIO INTERFERENCE FILTER: 120, 277 or 347 volt,
50 or 60 Hz. SUFFIX: R.
ROCKER SWITCH: (1 lamp only) SUFFIX: H.
CONVENIENCE OUTLET: (1 lamp only) SUFFIX: CO.
BALLAST OPTIONS: For other ballast options, consult
ballast specification sheet (folio BA-1-02)
FLU
5-INCH
RECESSED FOR
I.C. HOUSING
PROJECT
HV5S-HR05-ICAT
LAMP
FIXTURE TYPE
MODEL
CONTACT/TELEPHONE
Specifications
Description
Five-inch New Construction IC Airtight Housing
Dimensions & Ordering Guide
Model
Description
HV5S-HR05-ICAT
5” Housing for Insulated Ceiling
• Pre Drywall • Thermally Protected
• For use with BR30 lamps, max 65W,
PAR30 lamps , max 75W, and
A19 lamps, max 60W
Lamp Wattage / Type
• BR30, maximum 65W
• PAR30 , maximum 75W
• A19, maximum 60W
Maximum Wattage subject to limitations as listed with ceiling trims.
Features
•
•
•
•
•
•
Thermally protected to prevent over heating.
For use with various Liteline medium base lamps.
Airtight with adjustable socket height .
Fits up to 24” joist construction.
Can be completely covered by insulation
Socket clips to trim for instant vertical lamp alignment
Housing
• Aluminum canopy to protect against corrosion.
• With graduated scale 0-3” and adjustable can
for various ceiling thickness.
Electrical
Approved for through-circuit wiring (2 in and 2 out) which
allows for through branch wiring, 120V Input.
Trims
Complete selection of trims offering different lighting effects.
See Illustrated List Price Schedule and/or Colour Catalogue
for various trim selections.
Approval
UL Approval for damp locations with trim styles
Listings
LITELINE CORPORATION
8 Abacus Road, Brampton, Ontario, Canada L6T 5B7
Tel: 416-996-1856 • Fax: 905-654-8990 / 1-888-738-9736
E-mail: sales@liteline.com • Website: www.liteline.com
J-Box Details
• Commercial sized J-Box provided
• Pre-wired junction box provided with Five 7/8” knockouts,Four
Romex connectors and ground wire, U.L. listed/certified for
O
through-branch wiring, maximum 8 No. 12 AWG 90 C branch
circuit conductors (4 in, 4 out).
• J-Box provided with removable access plates
• 5 Knockout holes equipped with pryout slots.
Hanger Bar Details
• Heavy duty hanger bars, provided with 1/8” holes to lock it.
• Complete with 4 mounting nails.
• 24” max expansion stop allows quick placement of fixture in
standard grid spacing
• Hanger
bars can LIGHTING
be mounted lengthwise
AMERISIS
CORP. and crosswise.
• Rotating end plates provide easy installation & wiring under
LUXE PRESENTATION CENTER
ceiling seam.
• Bar hanger foot contoured to align to bottom of construction
TYPE
R1 / R4
joist, with screws.
DESC mounting
LITELINE
• Alternate
holes for HV5S-HR05-ICAT
interchangeable nail placement.
HV5-TH5005 CL
• Suitable for T bar applications.
LAMP
1 X 75 PAR30/FL
LOCATION
Product specifications subject to change without notice.
©Copyright 2007 Liteline Corporation.
03.09.07
FLU
5-INCH
RECESSED TRIM
FOR IC HOUSING
PROJECT
HV5-TH5005-CH
LAMP
FIXTURE TYPE
MODEL
CONTACT/TELEPHONE
Specifications
Description
Five-inch specular baffle available in Chrome
Dimensions & Ordering Guide
Model
Description
HV5-TH5005-CH
Five-inch specular baffle available in
Chrome
Lamp Wattage / Type
• BR30, 65W max
• PAR30 , 75W max
Intended use
• Designed to use with all Liteline 5” Recessed Housings.
- HV5S-HR05-ICAT
- HV5S-HR07RM-ICAT
65 mm
2.56”
Approval
• UL Approval for damp locations with trim styles
• Washington State Approval for Airtight Housing
• Washington State Energy Code approved
158 mm / 6.22”
Housing Compatibility (Housing and trim sold separately)
Applications - IC/Non-IC
Specifications
• Source - Incandescent
• Maximum Wattage
- 65W BR30
- 75W PAR30
• Housing
- HV5S-HR05-ICAT
- HV5S-HR07RM-ICAT
All dimensions are in millimeters (inches)
Listings
Outside Dimension: 158mm (6.22")
Aperture: 95.25 mm (3.75")
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
DESC
R1 / R4
LITELINE HV5S-HR05-ICAT
HV5-TH5005 CL
LAMP
1 X 75 PAR30/FL
LOCATION
LITELINE CORPORATION
8 Abacus Road, Brampton, Ontario, Canada L6T 5B7
Tel: 416-996-1856 • Fax: 905-654-8990 / 1-888-738-9736
E-mail: sales@liteline.com • Website: www.liteline.com
Product specifications subject to change without notice.
©Copyright 2007 Liteline Corporation.
03.13.07
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
2-020-F
MR16 - Frame In Kit
For Non-Insulated Ceilings
7 1/2”
9 3/4”
Combustible
Material
Minimum 1/2” clearance
SPECIFICATIONS
Housing:
3 1/2”
Rated Non I/C. The 2-020-F Frame- In Kit offers a unique design
allowing installations of very shallow plenums as low as 4”. Baseplate
20ga.C.R.S. with black powder coat paint finish. Baseplate is designed for
9 3/4”
bi-directional mounting of hanger bars. 16” Hanger bars supplied as standard.
Approved for all ceiling types including air-handling plenums.
J-Box:
18ga. Galvanized steel. 5 K.O. around J-Box to allow for easy wire entr y.
Trims to be used with
2-020-F Frame - In Kit
Approved for branch circuit wiring.
Thermal Protection:
All frame-in kits have overload protection for over lamping.
Transformer:
Housings with magnetic Transformers are rated to MAX 50 Watts. Magnetic
core
and coil transformers are made with copper windings, Class H Rating (180oC):
120V, 277V, 347V Primary available.
Optional Electronic transformer housings are available, MAX 50 Watts:
120V, 277V, Primary available.
Transformer is accessed through ceiling opening.
Socket:
Low Voltage MR-16, 12V, (lamp by others). Porcelain Bi-Pin socket type GX5.3
Guarantee:
DaSal Industries warrants all equipment to be free from defect in
manufacturing, under normal and proper storage, installation and use, for a
period of one (1) year and Five (5) years on all magnetic transformers.
Weight:
Rough - In approx. 3.69 Lbs (approx. 1.67 Kg)
Order Guide
MADE
IN CANADA
HOUSING
TRANSFORMER
VOLTAGE
2-020-F
E - Electronic XMR
120
BPHI
Black Painted
(Max 50 Watts)
Blank - MagneticXMR
277
Housing Interior
3471
Note:
1)
Magnetic transformer only available.
TYPE
Aqua
Aurora
Conus
Coral
Demi
Eclipse
Key Hole
Picolo
Lensed Picolo
Pin Hole
Pin Hole Wall Wash
Pivot
Siris
Split
Star Lite
Sunburst
Slice Accessories
See individual specification sheets for trim details
AMERISIS LIGHTING CORP.
LUXEName
PRESENTATION CENTER
Project
TYPE
R2
DESC
DASAL 2-020-F-120
Order
Number
LAMP
1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
1010 REV1
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Pin Hole
(MR 16 Trim)
3''
5 1/8''
SPECIFICATIONS
The die cast Pin Hole trim refers to its appearance and function. The regressed Pin Hole
trim offers down lighting through a 2” aperture. The lamp is non adjustable within this
series (for an adjustable Pin Hole see the Picolo series). The inner premium black baffle
reduces glare and absorbs lamp brightness. White Baffle is optional.
Designed for non cover glass MR16 lamp, can accommodate 1 lens accessories. Ships
standard with clear glass lens.
Pin Hole trims are ideal for highlighting objects in homes, stores, museums or any
hospitality application.
Order Guide
HOUSING
No Housing (Max 20 Watts)1
VOLTAGE
120
TYPE
2-180 - Pin Hole
FINISH
OPTION
01 - White
White Baffle
(Black baffle is standard)
2-010-I/C (Max 50 W)
277
04 - Black
2-010-I/C-A/T (Max 50 W)
347
05 - Matte Silver
2-020-F (Max 50 W)
2-030-R (Max 50 W)
2-060-F (Max 75 W)
TYPE
Note:
1)
Trim Only indicates use with a remote
Class 2 transformer. Transformer and
R12S socket sold separately.
Hole Cut out size 4 1/2”
Rite Light II is a division of DaSal Industries Ltd.
AMERISIS LIGHTING CORP.
LUXE
Project Name PRESENTATION CENTER
TYPE
DESC
Order Number
R2
DASAL 2-050-F-120
2-180-01
LAMP
1 X 50MR16 NFL
Data and
specifications subject to change without notice
LOCATION
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2120
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
2-020-F
MR16 - Frame In Kit
For Non-Insulated Ceilings
7 1/2”
9 3/4”
Combustible
Material
Minimum 1/2” clearance
SPECIFICATIONS
Housing:
3 1/2”
Rated Non I/C. The 2-020-F Frame- In Kit offers a unique design
allowing installations of very shallow plenums as low as 4”. Baseplate
20ga.C.R.S. with black powder coat paint finish. Baseplate is designed for
9 3/4”
bi-directional mounting of hanger bars. 16” Hanger bars supplied as standard.
Approved for all ceiling types including air-handling plenums.
J-Box:
18ga. Galvanized steel. 5 K.O. around J-Box to allow for easy wire entr y.
Trims to be used with
2-020-F Frame - In Kit
Approved for branch circuit wiring.
Thermal Protection:
All frame-in kits have overload protection for over lamping.
Transformer:
Housings with magnetic Transformers are rated to MAX 50 Watts. Magnetic
core
and coil transformers are made with copper windings, Class H Rating (180oC):
120V, 277V, 347V Primary available.
Optional Electronic transformer housings are available, MAX 50 Watts:
120V, 277V, Primary available.
Transformer is accessed through ceiling opening.
Socket:
Low Voltage MR-16, 12V, (lamp by others). Porcelain Bi-Pin socket type GX5.3
Guarantee:
DaSal Industries warrants all equipment to be free from defect in
manufacturing, under normal and proper storage, installation and use, for a
period of one (1) year and Five (5) years on all magnetic transformers.
Weight:
Rough - In approx. 3.69 Lbs (approx. 1.67 Kg)
Order Guide
MADE
IN CANADA
HOUSING
TRANSFORMER
VOLTAGE
2-020-F
E - Electronic XMR
120
BPHI
Black Painted
(Max 50 Watts)
Blank - MagneticXMR
277
Housing Interior
3471
Note:
1)
Magnetic transformer only available.
TYPE
Aqua
Aurora
Conus
Coral
Demi
Eclipse
Key Hole
Picolo
Lensed Picolo
Pin Hole
Pin Hole Wall Wash
Pivot
Siris
Split
Star Lite
Sunburst
Slice Accessories
See individual specification sheets for trim details
AMERISIS LIGHTING CORP.
Project LUXE
Name PRESENTATION CENTER
TYPE
R3
DESC
DASAL
2-020-F-120
Order Number
LAMP
1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
1010 REV1
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Aurora
(MR 16 Trim)
3 1/4''
5 1/16''
SPECIFICATIONS
All Aurora trims are adjustable (up to 35 degrees) and offer performance, versatility, and excellent brightness control in a
small aperture. All trim rings are made of die cast aluminum and are powder coat painted or plated. The collection includes
grooved baffles, silver, gold, black specular, champagne and satin reflectors. The series also offers decorative color
specular finishes matching any decor including copper, blue, green and purple.
Designed for non cover glass MR16 lamp, can accommodate up to 2 lens accessories. Ships standard with clear glass
lens.
The Aurora collection is ideal for lobbies, conference rooms, corridors, hotels, restaurants, retail spaces, music halls,
offices, and residences.
See Slice Decorative accessories specification sheet for more details.
Order Guide
HOUSING
VOLTAGE
No Housing (Max 20 Watts)1
120
TYPE
TRIM RING
2-120 - Aurora
01 - White
REFLECTOR COLOUR
FINISH
SA - Silver Specular 2
S- Satin
2-010-I/C (Max 50 W)
277
02 - Chrome
GA - Gold Specular 2
2-010-I/C-A/T (Max 50 W)
347
04 - Black
BA - Black Specular
2-020-F (Max 50 W)
05 - Matte Silver
COPA - Copper Specular 2
2-030-R (Max 50 W)
09 - Gold
BLUA - Blue Specular 2
2-060-F (Max 75 W)
11 - Matte Nickel
GRNA - Green Specular 2
PURA - Purple Specular 2
CHA - Champagne Specular 2
WHS - White stepped Baffle
BLS - Black Stepped Baffle
NIC-S - Nickel Satin 3
MADE
IN CANADA
Note:
1)
Trim Only indicates use with a remote Class 2
transformer. Transformer and R12S socket
sold separately. Hole Cut out size 4 1/2”
2)
These reflectors are available in Satin finishes
3)
Only available as Satin versions
TYPE
- Brushed MochaCORP.
AMERISISMOCH
LIGHTING
LUXE
PRESENTATION CENTER
Project
Name
TYPE
R3
OrderDESC
Number DASAL 2-120-01-SA
LAMP
1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2030
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
2-020-F
MR16 - Frame In Kit
For Non-Insulated Ceilings
7 1/2”
9 3/4”
Combustible
Material
Minimum 1/2” clearance
SPECIFICATIONS
Housing:
3 1/2”
Rated Non I/C. The 2-020-F Frame- In Kit offers a unique design
allowing installations of very shallow plenums as low as 4”. Baseplate
9 3/4”
20ga.C.R.S. with black powder coat paint finish. Baseplate is designed for
bi-directional mounting of hanger bars. 16” Hanger bars supplied as standard.
Approved for all ceiling types including air-handling plenums.
J-Box:
18ga. Galvanized steel. 5 K.O. around J-Box to allow for easy wire entr y.
Trims to be used with
2-020-F Frame - In Kit
Approved for branch circuit wiring.
Thermal Protection:
All frame-in kits have overload protection for over lamping.
Transformer:
Housings with magnetic Transformers are rated to MAX 50 Watts. Magnetic
core
and coil transformers are made with copper windings, Class H Rating (180oC):
Aqua
Aurora
Conus
Coral
Demi
Eclipse
Key Hole
Picolo
Lensed Picolo
Pin Hole
Pin Hole Wall Wash
Pivot
Siris
Split
Star Lite
Sunburst
Slice Accessories
120V, 277V, 347V Primary available.
Optional Electronic transformer housings are available, MAX 50 Watts:
120V, 277V, Primary available.
Transformer is accessed through ceiling opening.
Socket:
Low Voltage MR-16, 12V, (lamp by others). Porcelain Bi-Pin socket type GX5.3
Guarantee:
DaSal Industries warrants all equipment to be free from defect in
manufacturing, under normal and proper storage, installation and use, for a
period of one (1) year and Five (5) years on all magnetic transformers.
Weight:
Rough - In approx. 3.69 Lbs (approx. 1.67 Kg)
Order Guide
MADE
IN CANADA
HOUSING
TRANSFORMER
VOLTAGE
2-020-F
E - Electronic XMR
120
BPHI
Black Painted
(Max 50 Watts)
Blank - MagneticXMR
277
Housing Interior
3471
Note:
1)
Magnetic transformer only available.
TYPE
AMERISIS LIGHTING
CORP. sheets for trim details
See individual specification
LUXE PRESENTATION CENTER
Project Name
TYPE
R5
DESC
DASAL 2-020-F-120
OrderLAMP
Number 1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
1010 REV1
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Aurora
(MR 16 Trim)
3 1/4''
5 1/16''
SPECIFICATIONS
All Aurora trims are adjustable (up to 35 degrees) and offer performance, versatility, and excellent brightness control in a
small aperture. All trim rings are made of die cast aluminum and are powder coat painted or plated. The collection includes
grooved baffles, silver, gold, black specular, champagne and satin reflectors. The series also offers decorative color
specular finishes matching any decor including copper, blue, green and purple.
Designed for non cover glass MR16 lamp, can accommodate up to 2 lens accessories. Ships standard with clear glass
lens.
The Aurora collection is ideal for lobbies, conference rooms, corridors, hotels, restaurants, retail spaces, music halls,
offices, and residences.
See Slice Decorative accessories specification sheet for more details.
Order Guide
HOUSING
VOLTAGE
No Housing (Max 20 Watts)1
120
TYPE
TRIM RING
2-120 - Aurora
01 - White
REFLECTOR COLOUR
FINISH
SA - Silver Specular 2
S- Satin
2-010-I/C (Max 50 W)
277
02 - Chrome
GA - Gold Specular 2
2-010-I/C-A/T (Max 50 W)
347
04 - Black
BA - Black Specular
2-020-F (Max 50 W)
05 - Matte Silver
COPA - Copper Specular 2
2-030-R (Max 50 W)
09 - Gold
BLUA - Blue Specular 2
2-060-F (Max 75 W)
11 - Matte Nickel
GRNA - Green Specular 2
PURA - Purple Specular 2
CHA - Champagne Specular 2
WHS - White stepped Baffle
BLS - Black Stepped Baffle
NIC-S - Nickel Satin 3
MOCH - Brushed Mocha
MADE
IN CANADA
Note:
1)
Trim Only indicates use with a remote Class 2
transformer. Transformer and R12S socket
sold separately. Hole Cut out size 4 1/2”
2)
These reflectors are available in Satin finishes
3)
Only available as Satin versions
Rite Light II is a division of DaSal Industries Ltd.
TYPE
LIGHTING CORP.
ProjectAMERISIS
Name
LUXE PRESENTATION CENTER
TYPE
Order Number
R5
DESC
DASAL 2-120-02-SA
LAMP
1 X 50MR16 NFL
Data
and specifications subject to change without notice
LOCATION
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2030
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Aurora
(MR 16 Trim)
3 1/4''
5 1/16''
SPECIFICATIONS
All Aurora trims are adjustable (up to 35 degrees) and offer performance, versatility, and excellent brightness control in a
small aperture. All trim rings are made of die cast aluminum and are powder coat painted or plated. The collection includes
grooved baffles, silver, gold, black specular, champagne and satin reflectors. The series also offers decorative color
specular finishes matching any decor including copper, blue, green and purple.
Designed for non cover glass MR16 lamp, can accommodate up to 2 lens accessories. Ships standard with clear glass
lens.
The Aurora collection is ideal for lobbies, conference rooms, corridors, hotels, restaurants, retail spaces, music halls,
offices, and residences.
See Slice Decorative accessories specification sheet for more details.
Order Guide
HOUSING
VOLTAGE
No Housing (Max 20 Watts)1
120
TYPE
TRIM RING
2-120 - Aurora
01 - White
REFLECTOR COLOUR
FINISH
SA - Silver Specular 2
S- Satin
2-010-I/C (Max 50 W)
277
02 - Chrome
GA - Gold Specular 2
2-010-I/C-A/T (Max 50 W)
347
04 - Black
BA - Black Specular
2-020-F (Max 50 W)
05 - Matte Silver
COPA - Copper Specular 2
2-030-R (Max 50 W)
09 - Gold
BLUA - Blue Specular 2
2-060-F (Max 75 W)
11 - Matte Nickel
GRNA - Green Specular 2
PURA - Purple Specular 2
CHA - Champagne Specular 2
WHS - White stepped Baffle
BLS - Black Stepped Baffle
NIC-S - Nickel Satin 3
MOCH - Brushed Mocha
MADE
IN CANADA
Note:
1)
Trim Only indicates use with a remote Class 2
transformer. Transformer and R12S socket
sold separately. Hole Cut out size 4 1/2”
2)
These reflectors are available in Satin finishes
3)
Only available as Satin versions
Rite Light II is a division of DaSal Industries Ltd.
TYPE
LIGHTING CORP.
ProjectAMERISIS
Name
LUXE PRESENTATION CENTER
Order TYPE
Number
R6
DESC
DASAL 2-120-11 / R12S /LVT 60
LAMP
1 X 50MR16 NFL
Data and specifications subject to change without notice
LOCATION NICHES
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2030
New Vision in Point Source Lighting
ELECTRONIC TRANSFORMER COLLECTION
LVT-60 Class 2
(Mini Electronic Transformer C/W Enclosure)
Recommended for new construction
6 1/2"
(165mm)
1 3/8"
(36mm)
1 1/2"
(38mm)
LVT-60 Class 2
ar
3 Ye ty
ran
r
a
W
LET-60 Class 2
Inside the LVT Class 2
Enclosure
SPECIFICATIONS
Output Voltage vs. Load at 120V
UL File Numbers
12
11.95
11.9
11.85
11.8
11.75
11.7
11.65
11.6
11.55
UL and C-UL Recognized
UL FILE # E 193999
Mechanical and Thermal
Dimensions
36mm x 38 mm x 165 mm
300 grams
Weight
6”
Lead wire length
T
40 0C
Max. Ambient temp.
50 0C
2000C
Output wire – Blue – 14AWG
Input wire – White/Black – 18AWG
1500C
Waterproof potting
20W
60W
Output vs. Input at Max. Load
13
12.5
12
11.5
11
10.5
10
9.5
Electrical
Maximum load
Minimum load w/o dimmer
Minimum load with dimmer
Input
Output at max. Load
Input current at max. Load
Output current at max. Load
Power factor min.
Dimmable
50W
60W
10W
20W
120V 60Hz
11.75V 40kHz
0.5A
5A
0.95
110v
120V
130V
Short Circuit and Thermal Protection
Electronic internal resettable protection.
Patent pending auto heat regulation that also
automatically acts as overload protection.
Thermal auto-reset 1250C switch.
AMERISIS LIGHTING CORP.
TYPE
C
UL
®
Project
Name
LUXE
PRESENTATION CENTER
TYPE
US
R6
Order
Number DASAL 2-120-11 / R12S /LVT 60
DESC
LAMP
1 X 50MR16 NFL
LOCATION NICHES
Data and specifications subject to change without notice
Distributed by DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 120-1533 Broadway Street • Port Coquitlam, BC • V3C 6P3 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
7010
SB NARROW SERIES
STRIP NARROW
2-3/4'' WIDE X 1-5/8'' DEEP
18'', 24'', 36'', 48'', 72'', 96'' LENGTHS
1 LAMP IN A LUMINAIRE CROSS-SECTION
T8 OR T12 LAMP
Only 2-3/4'' wide.
Fully enclosed wiring.
Snap-on ballast cover.
Screwdriver slot for easy ballast cover
removal.
Combination end cap for continuous row
mounting.
Convenience outlet and switch K.O.s
provided.
Optional hangers, wire guards and aligners.
DIMENSIONS
TOP VIEW
A
2 3/4"
(70mm)
B
C
1 1/2"(38mm)
1 5/8"
(41mm)
2 5/8"
(67mm)
7/8"(22mm) K.O.
LEVELING BUMP
SIDE VIEW
D
Nom.Length
3 1/2"(89mm)
7/8"(22mm)K.O.
96"
E
(BOTH SIDES)
A
B
96"
93"
(2438mm)
72"
72"
48"
0.775"X1.040"(20mmX26mm)
REC. K.O. (BOTH SIDES)
1/2"(13mm)K.O.
(BOTH SIDE)
36"
(1829mm)
48"
(1219mm)
36"
(914mm)
24"
24"
(610mm)
18"
18"
MOUNTING METHODS/FEATURES
(457mm)
(2362mm)
69"
(1753mm)
45"
(1143mm)
C
46 5/8"
(1184mm)
33 13/16"
(859mm)
23"
(584mm)
33"
(838mm)
21"
N/A
N/A
(381mm)
FLOURESCENT STRIPS
MISC
FI-0400-03
Flipstrip - shipping position
Flipstrip - installation position
65"
(1651mm)
41"
(1041mm)
E
5"
(127mm)
5"
(127mm)
5"
(127mm)
N/A
(737mm)
17"
N/A
(432mm)
FIXTURE TYPE
JOB INFORMATION:
(2261mm)
29"
N/A
(533mm)
15"
D
89"
11"
N/A
(279mm)
VOLTS
STRIP NARROW
SB NARROW SERIES
2-3/4'' WIDE X 1-5/8'' DEEP
PHOTOMETRY
MODEL NO. SB148120LE
coefficients of utilization — zonal cavity method
RF
20
20
RC
80
50
RW
70
50
30
50
30
1
89
84
79
71
68
2
80
71
64
60
55
3
72
62
53
52
46
4
65
54
45
46
39
5
59
47
39
40
34
6
54
42
33
36
29
7
50
37
29
32
25
8
46
33
25
29
22
9
43
30
22
26
20
10
40
27
20
24
18
room cavity ratio
REPORT NO: G86118
CATALOG NO: SB148120SO
LAMP TYPE: 2F40T12/CW
LUMENS PER LAMP: 3150
TOTAL EFFICIENCY: 89.5%
CIE TYPE: Semi-Direct
SPACING CRITERIA: 1.6
SHIELDING ANGLE: 180
ORDERING INFORMATION
50
64
54
47
41
36
32
29
26
23
21
10
58
48
38
31
26
22
19
16
14
12
Explanation of Catalogue Number Example: SB148120LE
120
SB
1
48
NARROW
STRIP:
NUMBER OF LAMPS
IN WIDTH:
(Tandem)
LAMP TYPE:
18=nominal 18''
15W T8 or 18W T12
24=nominal 24''
17W T8 or 20W T12
36=nominal 36''
25W T8 or 30W T12
48=nominal 48''
32W T8 or 34W T8
36T=nominal 72''
25W T8 or 30W T8
(tandem)
48T=nominal 96''
32W T8 or 34W T8
(tandem)
2-3/4'' Wide
Channel
10
64
51
41
34
28
24
21
18
15
13
20
30
30
61
50
42
36
30
26
23
20
18
16
BALLAST TYPE:
L=Low power factor
(18W & 20W T12 only)
LE
VOLTAGE:
120, 277
347
OPTIONS:
BALLAST TYPE:
Add appropriate suffix
to catalog no.
LE
Magnetic T12 Energy Saving
<20THD† <10THD†
SO*
RO**
2 Lamp Elect. T8
O4*
R4**
1-4 Lamp Elect. T8
PS
--LOL T8 Dimming
* Instant Start Standard
**Rapid Start Standard
† % total harmonic distortion
OPTIONS/ACCESSORIES
FLOURESCENT STRIPS
MISC
CANOPY SPACER (1-1/2'')
STEM AND CANOPY SETS
Suspends luminaire 12”,
18”, 24”, 36”, 48” from
surface and can be used in
conjunction with Heavy Duty
Slide Grip Hanger.
Catalogue Number:
STKF12 (12”), STKF18 (18”),
STKF24 (24”), STKF36 (36”),
STKF48 (48”).
Suspends luminaire
approximately 1-1/2” from
surface.
Catalogue Number: STSK
CHAIN HANGER KIT
Two 24” heavy duty link
chains with sturdy “V” hooks
that grip luminaires at four
knockout points for level
suspension. Catalogue
Number: EE9HC
WIRE GUARDS
BALLAST OPTIONS: For
other ballast options, consult
Hinge and latch positive-lock
ballast specification sheet
construction, complete with
(folio BA-1-02)
longitudinal and transverse
struts for secure protection.
Cat. Number Luminaire
SB8G1-24 SB124
SB8G1-36 SB136
SB8G1-48 SB148, SB148T (order 2)
SPECIFICATIONS:
MATERIALS: Chassis parts are die-formed code gauge cold rolled steel, 1-5/8''
deep, 4-5/8'' channel width.
LAMPHOLDERS: Mounted to flip-up socket bridge which can be flipped up from
the horizontal (shipping position) to the vertical (installation) position with 4 screws.
BALLAST COVER: Snap-on type without fasteners. Screwdriver slots are to be
provided in housing for easy removal of ballast cover.
FINISH: Chassis exterior phosphate undercoating, baked white polyester enamel.
ELECTRICAL: Rapid start HPF, thermally protected class ''P'' ballast C.B.M. certified
by E.T.L. If K.O. is within 3'' of ballast, use wire suitable for at least 90°.
LABELS: Listed by CSA.
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
525 EDUCATION RD., CORNWALL, ONTARIO K6H 6C7
TEL.: (613) 938-6221 FAX: (613) 938-0961
MX 3525-11
Wd: 12" Ht:
3"
Finish:
White/Chrome
Glass: White
Lamps:
2x60W (A15)
Options:
2/PL13 or
1/PL26E
Quality Italian Fixtures
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
1 Suites
DESC
Maxilite MX 3525-11
LAMP
2 X 60A15
LOCATION
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
2-020-F
MR16 - Frame In Kit
For Non-Insulated Ceilings
7 1/2”
9 3/4”
Combustible
Material
Minimum 1/2” clearance
SPECIFICATIONS
Housing:
3 1/2”
Rated Non I/C. The 2-020-F Frame- In Kit offers a unique design
allowing installations of very shallow plenums as low as 4”. Baseplate
9 3/4”
20ga.C.R.S. with black powder coat paint finish. Baseplate is designed for
bi-directional mounting of hanger bars. 16” Hanger bars supplied as standard.
Approved for all ceiling types including air-handling plenums.
J-Box:
18ga. Galvanized steel. 5 K.O. around J-Box to allow for easy wire entr y.
Trims to be used with
2-020-F Frame - In Kit
Approved for branch circuit wiring.
Thermal Protection:
All frame-in kits have overload protection for over lamping.
Transformer:
Housings with magnetic Transformers are rated to MAX 50 Watts. Magnetic
core
and coil transformers are made with copper windings, Class H Rating (180oC):
Aqua
Aurora
Conus
Coral
Demi
Eclipse
Key Hole
Picolo
Lensed Picolo
Pin Hole
Pin Hole Wall Wash
Pivot
Siris
Split
Star Lite
Sunburst
Slice Accessories
120V, 277V, 347V Primary available.
Optional Electronic transformer housings are available, MAX 50 Watts:
120V, 277V, Primary available.
Transformer is accessed through ceiling opening.
Socket:
Low Voltage MR-16, 12V, (lamp by others). Porcelain Bi-Pin socket type GX5.3
Guarantee:
DaSal Industries warrants all equipment to be free from defect in
manufacturing, under normal and proper storage, installation and use, for a
period of one (1) year and Five (5) years on all magnetic transformers.
Weight:
Rough - In approx. 3.69 Lbs (approx. 1.67 Kg)
Order Guide
MADE
IN CANADA
HOUSING
TRANSFORMER
VOLTAGE
2-020-F
E - Electronic XMR
120
BPHI
Black Painted
(Max 50 Watts)
Blank - MagneticXMR
277
Housing Interior
3471
Note:
1)
Magnetic transformer only available.
TYPE
See individual specification sheets for trim details
AMERISIS LIGHTING CORP.
LUXE
PRESENTATION CENTER
Project Name
TYPE
2&2
DESC
Order
NumberDASAL 2-020-G-120/ 2-120-01
LAMP
1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
1010 REV1
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Aurora
(MR 16 Trim)
3 1/4''
5 1/16''
SPECIFICATIONS
All Aurora trims are adjustable (up to 35 degrees) and offer performance, versatility, and excellent brightness control in a
small aperture. All trim rings are made of die cast aluminum and are powder coat painted or plated. The collection includes
grooved baffles, silver, gold, black specular, champagne and satin reflectors. The series also offers decorative color
specular finishes matching any decor including copper, blue, green and purple.
Designed for non cover glass MR16 lamp, can accommodate up to 2 lens accessories. Ships standard with clear glass
lens.
The Aurora collection is ideal for lobbies, conference rooms, corridors, hotels, restaurants, retail spaces, music halls,
offices, and residences.
See Slice Decorative accessories specification sheet for more details.
Order Guide
HOUSING
VOLTAGE
No Housing (Max 20 Watts)1
120
TYPE
TRIM RING
2-120 - Aurora
01 - White
REFLECTOR COLOUR
FINISH
SA - Silver Specular 2
S- Satin
2-010-I/C (Max 50 W)
277
02 - Chrome
GA - Gold Specular 2
2-010-I/C-A/T (Max 50 W)
347
04 - Black
BA - Black Specular
2-020-F (Max 50 W)
05 - Matte Silver
COPA - Copper Specular 2
2-030-R (Max 50 W)
09 - Gold
BLUA - Blue Specular 2
2-060-F (Max 75 W)
11 - Matte Nickel
GRNA - Green Specular 2
PURA - Purple Specular 2
CHA - Champagne Specular 2
WHS - White stepped Baffle
BLS - Black Stepped Baffle
AMERISIS
CORP.
NIC-SLIGHTING
- Nickel Satin
MOCH - Brushed Mocha CENTER
LUXE PRESENTATION
3
MADE
IN CANADA
Note:
1)
Trim Only indicates use with a remote Class 2
transformer. Transformer and R12S socket
sold separately. Hole Cut out size 4 1/2”
2)
These reflectors are available in Satin finishes
3)
Only available as Satin versions
TYPE
Project Name
TYPE
DESC
2&2
DASAL 2-020-F-120
Order Number
2-120-01
LAMP
1 X 50MR16 NFL
LOCATION
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2030
New Vision in Point Source Lighting
RECESSED LUMINAIRE COLLECTION
Aqua
(MR 16 Trim)
3 1/4''
5 1/16''
SPECIFICATIONS
The Aqua trim is wet location listed. All Aqua trims are adjustable (up to 35 degrees).
The Aqua is an alternative to the Coral Shower Trim. The trim is made of die cast
aluminum and features a flat glass design which is sealed in place. The Aqua is
available with clear or frosted glass.
The Aqua collection is designed for 50 or 75 Watt MR16 lamps (depending on the
housing) and provides excellent illumination for shower applications.
Applications can include: showers, soffits, saunas, or any place where a wet listed trim
is required.
Order Guide
HOUSING
No Housing (Max 20 Watts)1
VOLTAGE
120
TYPE
FINISH
2 -115 - AQUA
GLASS
01 - White
F - Frosted Glass
C - Clear Glass
2-010-I/C (Max 50 W)
277
02 - Chrome
2-010-I/C-A/T (Max 50 W)
347
04 - Black
2-020-F (Max 50 W)
05 - Matte Silver
2-030-R (Max 50 W)
11 - Matte Nickel
2-060-F (Max 75 W)
TYPE
Note:
1)
Trim Only indicates use with a remote
Class 2 transformer. Transformer and
R12S socket sold separately.
Hole Cut out size 4 1/2”
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
Project Name
TYPE
DESC
12
DASAL 2-020-F-120
Order Number
2-115-01-F
LAMP
1 X 50MR16 NFL
LOCATION SHOWERS
Data and specifications subject to change without notice
Rite Light II is a division of DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 804-1515 Broadway Street • Port Coquitlam, BC • V3C 6M2 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
2020
MILLWORK LUMINAIRE COLLECTION
10 Watt Series
2 1/8''
514 050
Recessed Mount
9/16''
2 5/8''
514 050
Recessed Mount
514 070
Surface Mount
3/4’'
514 070
Surface Mount
2 5/8''
SPECIFICATIONS
STANDARD FEATURES
•
Frosted lens standard
•
Screw installation
Lamp Type:
Max 10 watts
Note:
•
6ft (2 m) lead is standard
•
10 Watt maximum (Osram lamp included and installed)
•
Approved for blind hole applications
•
Certified as stand alone luminaire
• All Elektra Cabinet Luminaires are to be powered
with remote Class 2 transformers. (Sold
separately)
• See TRANSFORMER section for requirements
• See under Cabinet light Installation sheet for typical
OPTIONAL ACCESSORIES
•
G4 Bi Pin Halogen
Black, Gold, Chrome and Matte Nickel Rotatable Anti- Glare Shield available
installation methods. (Install 1)
Order Guide
514
SERIES
514
MOUNTING
FINISH
050 - Recessed Mount
070 - Surface Mount
56O
01 - White
02 - Chrome
03 - Brown
04 - Black
05 - Matte Silver
07 - Metallic Brown
08 - Charcoal Grey
09 - Gold
11 - Matte Nickel
TYPE
UL
LISTED
C
UL
LISTED
LOW VOLTAGE FIXTURE
ACCESSORIES
Antiglare Shield 02 - Chrome
Antiglare Shield 04 - Black
Antiglare Shield 09 - Gold
Antiglare Shield 11 - Matte Nickel
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
Project Name
TYPE
2a
DESC
DASAL
514-050-01
Order Number
LAMP
1 X 10W HALOGEN INCLUDED
LOCATION
Data and specifications subject to change without notice
Elektra is distributed by DaSal Industries Ltd.
DaS al Ind ust rie s L td. • Unit#120-1533 Broadway Street • Port Coquitlam, BC • V3C 6P3 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
E1A
New Vision in Point Source Lighting
ELECTRONIC TRANSFORMER COLLECTION
LVT-60 Class 2
(Mini Electronic Transformer C/W Enclosure)
Recommended for new construction
6 1/2"
(165mm)
1 3/8"
(36mm)
1 1/2"
(38mm)
LVT-60 Class 2
ar
3 Ye ty
ran
r
a
W
LET-60 Class 2
Inside the LVT Class 2
Enclosure
SPECIFICATIONS
Output Voltage vs. Load at 120V
UL File Numbers
12
11.95
11.9
11.85
11.8
11.75
11.7
11.65
11.6
11.55
UL and C-UL Recognized
UL FILE # E 193999
Mechanical and Thermal
Dimensions
36mm x 38 mm x 165 mm
300 grams
Weight
6”
Lead wire length
T
40 0C
Max. Ambient temp.
50 0C
2000C
Output wire – Blue – 14AWG
Input wire – White/Black – 18AWG
1500C
Waterproof potting
20W
60W
Output vs. Input at Max. Load
13
12.5
12
11.5
11
10.5
10
9.5
Electrical
Maximum load
Minimum load w/o dimmer
Minimum load with dimmer
Input
Output at max. Load
Input current at max. Load
Output current at max. Load
Power factor min.
Dimmable
50W
60W
10W
20W
120V 60Hz
11.75V 40kHz
0.5A
5A
0.95
110v
120V
130V
Short Circuit and Thermal Protection
Electronic internal resettable protection.
Patent pending auto heat regulation that also
automatically acts as overload protection.
Thermal auto-reset 1250C switch.
AMERISIS LIGHTING CORP.
TYPE
C
UL
®
US
Project
Name
LUXE
PRESENTATION CENTER
TYPE
2a
Order
Number
DESC
DASAL LVT120/12
LAMP
N/A
LOCATION
Data and specifications subject to change without notice
Distributed by DaSal Industries Ltd.
DaSal Industries Ltd.• Unit# 120-1533 Broadway Street • Port Coquitlam, BC • V3C 6P3 • Phone (604) 464-5644 • Fax (604) 464-0888
www.dasalindustries.com
7010
SV STRIP T5
STRIP T5
2" WIDE 1 3/8" DEEP
22", 34", 46" AND 92" LENGTHS
1 OR 2 LAMP, T5
Only 2" wide.
Utilizes compact, high efficency, T5 or T5HO lamps.
Fully enclosed wiring.
Optional white or specular, symmetric and assymmetric reflector.
Convenience outlet and switch K.O.s provided.
Push through lamp holders with rotor for secure
lamp retention.
Optional hangers and wires guards.
DIMENSIONS
FIXTURE TYPE
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
5
DESC
CFI SV4S 128 UNVPG
LAMP
1 X F28 T5 3000K
LOCATION
JOB INFORMATION:
FI-0500-03
VOLTS
SV STRIP T5
STRIP T5
22", 34", 46” OR 92" LENGHTS
PHOTOMETRY
MODEL NO. SV4S228120PI
ORDERING INFORMATION
SV
4
STRIP
NOMINAL
Strip T5,
FIXTURE
2" wide X 1 3/8" deep
LENGTH
channel
2 = NOMINAL 22"
3 = NOMINAL 34"
4 = NOMINAL 46"
8 = NOMINAL 92"
S
CEILING TYPE
S = Surface
Explanation of Catalogue Number Example: SV4S228120PI
2
28
LAMP
LAMP TYPE
QUANTITY
(NOMINAL 22”)
IN A LUMINAIRE 14 = 14W T5
CROSS-SECTION 24 = 24W T5 HO
(NOMINAL 34”)
1 or 2
21 = 21W T5
39 = 39W T5 HO
(NOMINAL 46”)
28 = 28W T5
54 = 54W T5 HO
120
PI
VOLTAGE
UNV = 120/277V
120 = 120V
277 = 277V
347 = 347V
BALLAST TYPE
OPTIONS/ACCESSORIES
STEM AND CANOPY SETS: Suspend luminaire
12", 18", 24", 36", or 48" from surface. (Two
per luminaire is recommended. For 34"
and 46" STB Strip only.) Catalogue number:
SV5F12 (12"); SV5F18 (18"); SV5F24 (24");
SV5F36 (36"); SV5F48 (48")
CHAIN HANGING KIT: Includes two 5' heavy duty link chains
with sturdy "V" hook for fixture suspension. (34" and 46" STB Strip
only.) Catalogue number: EE9HC
WIRE GUARD: Galvanized wire guard. Catalogue number:
FOR SV STRIP T5 34": SV5GXG3
FOR SV STRIP T5 46": SV5GXG4
REFLECTORS: Consult specification sheet (folio FI-0560-03 and
FI-0565-03)
OPTIONS
PG = Electronic T5 Program Start
PI = Electronic T5 Instant Start
PF = T5 Power Spec Dimming*
*Not available in 347V.
AMERISIS LIGHTING CORP.
LUXE PRESENTATION CENTER
TYPE
5
RADIO INTERFERENCE
FILTER: 120, 277 or 347 volt,
50 or 60 Hz. SUFFIX: R
DESC
CFI
SV4S
128 UNVPG
ROCKER SWITCH: SUFFIX: H
CONVENIENCE1OUTLET:
CO
LAMP
X F28SUFFIX:
T5 3000K
BALLAST OPTIONS: For other ballast options, consult
LOCATION
ballast specification sheet (folio BA-1-02)
SPECIFICATIONS
MATERIALS: Chassis parts are die-formed heavy gauge cold rolled steel,
1 3/8" deep x 2" channel width.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte high reflectance paint finish.
ELECTRICAL: HPF, thermally protected class “P” ballast. If K.Os are within
3” of ballast use wire suitable for at least 90C.
LABELS: Listed by
We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.
525 EDUCATION RD., CORNWALL, ONTARIO K6H 6C7
TEL.: (613) 938-6221 FAX: (613) 938-0961