LAN Phone 399 User Manual IP Phone User Manual Version: V1.0 Welltech Technology Co., Ltd. 1 / 89 2014/02/11 LAN Phone 399 User Manual Version directions: Version date 1.0 2014/02/11 Welltech Technology Co., Ltd. Modify content First release of New v3.0 web page user operation. 2 / 89 2014/02/11 LAN Phone 399 User Manual Directory 1. Brief Introduction ............................................................................................................... 5 1.1. Product Introduction ................................................................................................... 5 1.2. Hardware Function Introduction ............................................................................. 5 1.3. Software Function Introduction .............................................................................. 5 1.4. Rear Interface Description ........................................................................................ 6 1.5. Hardware Installation ................................................................................................. 6 1.5.1. Network Environment Setting ..................................................................... 7 1.5.2. Connection .......................................................................................................... 7 1.6. Basic Operations ........................................................................................................... 7 1.6.1. Phone function ................................................................................................... 7 1.6.2. Dial function Introduction ........................................................................... 14 2. Web Page .................................................................................................................................... 16 2.1. Web Login Level Table .............................................................................................. 16 2.2. Login LP399 Web Page ............................................................................................. 16 2.2.1. Functions............................................................................................................ 16 2.2.2. Instruction ......................................................................................................... 17 2.3. VoIP Setup Manu ........................................................................................................ 17 2.3.1. Functions............................................................................................................ 17 2.3.2. Instruction ......................................................................................................... 17 2.4. Status (System Information) ................................................................................. 18 2.4.1. Functions............................................................................................................ 18 2.4.2. Instruction ......................................................................................................... 18 2.5. Phone (Telephony environment) .......................................................................... 23 2.5.1. Phone Book....................................................................................................... 23 2.5.2. Speed Dial......................................................................................................... 27 2.5.3. Dial Plan - Basic.............................................................................................. 28 2.5.4. Dial Plan – Advanced .................................................................................... 31 2.5.5. Call Service (Phone Feature) ..................................................................... 33 2.5.6. General (Normal Setting) ........................................................................... 36 2.5.7. Volume ............................................................................................................... 37 2.6. Network ......................................................................................................................... 38 2.6.1. WAN...................................................................................................................... 38 2.6.2. DDNS (Dynamic DNS Settings) ................................................................ 40 2.6.3. VLAN (VLAN Environment Settings) ....................................................... 41 2.6.4. VPN (PPTP/L2TP Link Type)........................................................................ 42 2.6.5. NTP (Time Environment)............................................................................. 44 2.7. NAT (NAT Environment) .......................................................................................... 48 2.7.1. LAN (LAN Network Setting) ....................................................................... 48 2.7.2. DMZ & MAC Clone (DMZ & MAC Setting) ............................................. 49 2.7.3. Virtual Server .................................................................................................. 50 2.8. SIP Setting (Register Environment) .................................................................... 52 2.8.1. Service (SIP Register Setting) .................................................................. 52 2.8.2. Codec (Voice Format) ................................................................................... 54 2.8.3. Advanced (Other Setting) ........................................................................... 56 2.8.4. STUN (STUN & Force Setting) ................................................................... 62 Welltech Technology Co., Ltd. 3 / 89 2014/02/11 LAN Phone 399 User Manual 2.9. Management (Advanced Settings) ...................................................................... 64 2.9.1. Status Log (System Status) ....................................................................... 64 2.9.2. Auto Provision (Configuration Automatically) ..................................... 66 2.9.3. Auto Update (Firmware Auto Upgrade) ................................................. 73 2.9.4. Firmware (Firmware Upgrade) .................................................................. 77 2.9.5. Advanced (Advanced Settings) ................................................................. 78 2.9.6. Password (Change Login Account) .......................................................... 82 2.9.7. Tones (Audio Frequency Set up) .............................................................. 83 2.9.8. Default (Reset to Default) ........................................................................... 87 2.9.9. Language ........................................................................................................... 88 2.10. Save & Reboot ........................................................................................................... 89 2.10.1. Functions ........................................................................................................ 89 2.10.2. Instruction ...................................................................................................... 89 2.11. Logout (Logout System) ....................................................................................... 89 2.11.1. Functions ........................................................................................................ 89 2.11.2. Instruction ...................................................................................................... 89 Welltech Technology Co., Ltd. 4 / 89 2014/02/11 LAN Phone 399 User Manual 1. Brief Introduction 1.1. Product Introduction This user manual is applicable for LP399 series VoIP phone device. The chapter will be targeted device detailed function and web page configuration introduction. 1.2. Hardware Function Introduction LP399 provided interface: RJ-45 Ethernet port, RJ-9 handset port, LED indication and AC/DC power adaptor connecting seat. Provided two RJ-45 Ethernet interface, they support 10/100MB Ethernet speed. You can use WAN port to connect ADSL or router; LAN port connects your computer. 1.3. Software Function Introduction Network Protocol SIP v1 (RFC2543), v2(RFC3261) IP/TCP/UDP/RTP/RTCP IP/ICMP/ARP/RARP/SNTP TFTP Client/DHCP Client/ PPPoE Client Telnet/HTTP Server DNS Client IPv4 Codec G.711: 64k bit/s (PCM) iLBC,GSM G.726: 16k / 24k / 32k / 40k bit/s (ADPCM) G.729A: 8k bit/s (CS-ACELP) G.729B: adds VAD & CNG to G.729 Call Call Hold Call Waiting Call Forward Caller ID 3-way conference DTMF Function In-Band DTMF Out-of Band DTMF SIP Info SIP Server Registrar Server (three SIP account) IP Assignment Static IP DHCP PPPoE QoS ToS field VLAN VPN Tone Ring Tone Ring Back Tone Dial Tone Busy Tone User Programming Tone Voice Quality VAD: Voice activity detection CNG: Comfortable noise generator LEC: Line echo canceller Packet Loss Compensation Adaptive Jitter Buffer Phone Function Volume Adjustment Speed dial, Phone book Flash Full-Duplex Speaker Phone Secondsurity HTTP 1.1 basic/digest authentication for Web Setup MD5 for SIP authentication (RFC2069/ RFC 2617) Configuration Web Browser Console/Telnet Keypad Firmware Upgrade TFTP Console HTTP FTP NAT Traversal STUN PPTP L2TP Welltech Technology Co., Ltd. 5 / 89 2014/02/11 LAN Phone 399 User Manual 1.4. Rear Interface Description Interface DC 9~12V Explanation (Internal-Positive; External-Negative) Connect AC/DC power adaptor. LAN WAN Handset Connect personal computer. Connect ADSL or Cable Modem device. Handset connection. 1.5. Hardware Installation After set up the LP399 device, please follow these steps to connect LP399 accordingly. 1. One of the power cord connected to the LP399 AC/DC power adaptor connecting seat, the AC outlet connected to the wall electric outlet. 2. Use LAN port through RJ-45 Ethernet line to connect personal computer. 3. Use RJ-45 Ethernet line to connect LP399 WAN port and ADSL/Cable modem、Router or other switch. 4. The RJ-9 handset line connect LP399 handset. 5. Once the phone power on, the LCD monitor will show the booting word. Wait a few minutes, the LP399 boot completely then you can use LCD or web page to configure your account and phone number. Welltech Technology Co., Ltd. 6 / 89 2014/02/11 LAN Phone 399 User Manual 1.5.1. Network Environment Setting Netwrok Mode: Default NAT Mode WAN Port: DHCP Client Mode LAN Port: DHCP Server Enable, IP Address: 192.168.123.1, Mask: 255.255.255.0 1.5.2. Connection Please connect the personal computer to LP399 LAN port, then set up computer Ethernet to configure DHCP mode. The computer will get DHCP IP address. (ex. 192.168.123.150). Use Web browser at your computer at http://192.168.123.1:9999 to enter webpage setup mode of LP399. 1.6. Basic Operations 1.6.1. Phone function 1.6.1.1. Key function Key Explanation “1”,“-“,“٫”,“!”,“?”,“"”,“@” 1 “2”,“a”,“b”,“c”,“A”,“B”,“C” 2 “3”,“d”,“e”,”f”,“D”,“E”,“F” 3 “4”,“g”,“h”,“I”,“G”,“H”,“I” 4 “5”,“j”,“k”,“l”,“J”,“K”,“L” 5 “6”,“m”,“n”,“o”,“M”,“N”,“O” 6 “7”,“p”,“q”,“r”,“s”,“P”,“Q”,“R”,‘S” 7 “8”,“t”,“u”,“v”,“T”,“U”,“V” 8 “9”,“w”,“x”,“y”,“z”,“W”,“X”,“Y”,“Z” 9 “0”,“space” 0 “*”,“•”,“:”,“+” * # Conf Pick Remark A/a/1 change English Letter upper/lower Case and number. Start the dialing process. a. In talk time, press “Hold” key can retain Three party the phone call immediately. At the conference meeting same time will hear Dial Tone, User can call to other extension to join 3-party meeting. The third party answers the phone call and press “CONF” key to join 3-way conference call immediately. b. Once caller(LP399) disconnect, the 3rd party call was disconnect either. c. In addition to the caller, any one disconnect and quit 3-party conference call, the caller(LP399) with online people can remain talking. a. User hear the nearby phone incoming Pickup call group ringing and press “Pick” key to answer this call from nearby phone. b. Or Off-Hook first, choose talk mode then press “Pick” key to pick up nearby incoming phone call. Welltech Technology Co., Ltd. 7 / 89 2014/02/11 LAN Phone 399 User Manual Key Explanation Trans a. In a talking line, press “Trans” key and dial the transferee number to transfer this call. b. If the transferee number does not answer this call, user can press “Trans” key again to retrieve this call. a. Press this key to dial the last dialed number automatically. b. In LCD screen, User can use navigation keys to choose a phone number in the dialed list and press “Redial” key to dial out automatically. In the talk time, press this key to make the call on hold. Then press this key again will unhold or press L1~L3 key unhold this call. a. According to LCD screen’s state, use “up、down、left、right” navigation key to move. b. Press “OK” key to select menu and save Setting. c. Press “C” key to give up this options and don’t saving. Or return to upper layer of the option. L1, L2, L3 can be registered at different SIP Server or IP-PBX. Redial Hold , , , , , L1, L2, L3 MENU VMS CALL IN CALL OUT DND FORWARD SPEED PHONE BOOK MUTE Remark Transfer Redial the last dial phone number Retention Navigation keys(the arrow keys) Support three lines for SIP account registration. Press “MENU” key to enter Menu mode of LCD control display. If you back to previous LCD menu page, Please press “MENU” key again. This function shall cooperate with the Vocie Mail Service SIP Server or IP-PBX. Before use the VMS function, need to Setup IP phone’s VMS dial code. Press this button can enter SIP server VMS and hear voice message. Show all incoming call’s nember list. Show all outgoing call’s nember list. a. Press this key then LCD will show Do Not Disturb #DND#, Any incoming call is denied, but call can be dialed out. b. Press this key again, the phone will cancel DND state. This is the “Forward” function. Forwarding options can be configured here. This is the “Speed Dial” function. This is the “Phone Book” function. Pess this key at talk time, Phone’s MIC will Mute(Close the Welltech Technology Co., Ltd. 8 / 89 2014/02/11 LAN Phone 399 User Manual Key Explanation Remark disabeled. Volume -/+ Microphone during the phone call.) Handfree Press this key can enable “Handfree” function (In the “Headset” mode can use this key to “Handfree” mode). a. Press upper position to increase the Volume adjustment volume, or press below to reduce the receiving volume. b. During talk time, the key can adjust the volume. c. With the LCD options, press this key to adjust “Ring Tone” volume. 1.6.1.2. LP399 LCD Menu Item First Layer Secondsond Third Layer Layer 1. Phone Book 1. Search Fourth Layer 2. Add entry 3. Speed Dial 4. Erase all 2. Call history 1. Incoming Calls 2. Dialed numbers 3. Erase record 1. All 2. Incoming 3. Dialed 3. Phone Setting 1.Call forward All forward Activation (Enable/Disable) Number Busy forward Activation (Enable/Disable) Number No answer fwd Activation (Enable/Disable) Number Welltech Technology Co., Ltd. 9 / 89 Explanation Search phone book list Add new phone number Add new speed dial data Delete all phone book data Show all missed call Show all dialed call number Delete all call records Delete all incoming call records Delete all dialed call number Start/Stop unconditional forward feature Set up forward number Start/Stop busy forward feature Set up forward number Start/Stop no answer feature Set up forward number 2014/02/11 LAN Phone 399 User Manual First Layer Secondsond Layer Third Layer Ring Timeout 2.Do not Disturb 1.Always 2.By Period 3.Period Time 3.Alarm Setting 1.Activation 2.Alarm time 4.Date/Time Setting 1.Date & Time 2.SNTP Setting 5.Volume & Gain, 1.Handset volume 2.Speaker volume 3.Handset gain 4.Speaker gain 6.Ringer 1. Ringer Volume 2. Ring Type 7.Auto dial 4. Network 1.WAN set up Welltech Technology Co., Ltd. 1.IP Type 10 / 89 Fourth Layer Explanation Set up no answer timeout 1.Enable Start/Stop DND 2.Disable incoming call feature 1.Enable Start/Stop at the 2.Disable time enable DND feature Set up DND enable time 1. Enable Start/Stop alarm 2. Disable feature Set up alarm time Set up device time manually 1.SNTP Start/Stop device regulate time automatic 2.Primary SNTP Set up first time server location 3.Secondsondary Set up SNTP secondsond time server location 4.Time zone Set up time zone 5.Adjustment Set up how often Time to check time Set up Handset receiving volume Set up Speaker volume Set up Handset microphone gain Set up speaker Phone mode microphone gain Set up “Ring Tone” volume Set up “Ring Tone” type Set up auto dial time 1.Fixed IP client Set up fixed IP address manually 2.DHCP client Set up IP address automatically 3.PPPoE client Use PPPoE feature 2014/02/11 LAN Phone 399 User Manual First Layer Secondsond Layer Third Layer 2.Fixed IP Setting Fourth Layer 1.IP Address 2.Subnet mask 3.Default Gateway 1.User name 3.PPPoE Setting 2.Password 2.LAN set up 1.Bridge 3.DNS 2.NAT 1.Primary DNS 2.Secondary DNS 4.VLAN 1.Activation 1. Enable 2. Disable 2. VID 5.Status 6.NETWORK Speed 1.Auto 2.100M Full 3.100M Half, 4.10M Full 5.10M Half 5. SIP Setting *Admin Use 1.Service domain 1.First realm Activation (Enable/Disable) Display name Phone number Welltech Technology Co., Ltd. 11 / 89 Explanation Set up IP address Set up network mask Set up network gateway Set up PPPoE user name Set up PPPoE password Set up bridge mode Set up NAT mode Set up the first DNS server location Set up secondary DNS server location Start/Stop VLAN feature Setup VLAN ID Show network state Set up network speed automatically Set up network speed 100M Full-duplex automatically Set up network speed 100M Half-duplex automatically Set up network speed 10M Full-duplex automatically Set up network speed 10M Half-duplex automatically First SIP account activation Set up account display name Set up SIP account phone number 2014/02/11 LAN Phone 399 User Manual First Layer Secondsond Layer Third Layer Fourth Layer Auth. name Auth. password Proxy server Domain server 2.Second realm Activation (Enable/Disable) Display name Phone number Auth. name Auth. password Proxy server Domain server 3.Third realm Activation (Enable/Disable) Display name Phone number Auth. name Auth. password Proxy server Domain server 2.Status First realm Second realm Welltech Technology Co., Ltd. 12 / 89 Explanation Set up SIP account register name Set up SIP account register password Set up Proxy server address Set up Domain server address Second SIP account activation Set up account display name Set up SIP account phone number Set up SIP account register name Set up SIP account register password Set up Proxy server address Set up Domain server address Third SIP account activation Set up account display name Set up SIP account phone number Set up SIP account register name Set up SIP account register password Set up Proxy server address Set up Domain server address First register account state Second register account state 2014/02/11 LAN Phone 399 User Manual First Layer Secondsond Layer Third Layer Fourth Layer Third realm 6. Administrator 1.Auto config *Admin Use 2.Upgrade system 1.Disable 2.TFTP 3.FTP 4.HTTP 1.Upgrade Now 1. Yes 2. No 2.Upgrade via *Admin Use 3.Status 4.Reset Time 3.Default Setting 1.Load default 2.Abort 4.System Authent 5.Version 6.LCD Language 1.English 2.Portugal 7.Restart 8.Auto Reboot 1. Enable 2. Disable 1.Disable 2.TFTP 3.FTP 4.HTTP No new s/w Next=xx-xx xx:xx 1. Yes 2. No Explanation Third register account state Disable provision update automatically Use TFTP mode Use FTP mode Use HTTP mode Execute/Cancel upgrade automatic Stop upgrade automatically feature Use TFTP mode Use FTP mode Use HTTP mode Show state and next upgrade time Reset/Stop upgrade time automatically Start reset to default configuration Stop reset to default configuration Set up system permissions Device version information LCD English interface LCD Portugal interface Restart device Enable auto reboot feature Disable auto reboot feature *Admin Use: Enter LCD menu 6.Administrator > 4.System Authent, Then use the LP399 administrator’s password to login. After login, You can enter this option and modify settings. Welltech Technology Co., Ltd. 13 / 89 2014/02/11 LAN Phone 399 User Manual 1.6.2. Dial function Introduction 1.6.2.1. LP399 Dial Feature There are three ways to dial number: 1. Select L1~L3 line, After dial number direct, press “#” key to dial out immediately. 2. Select L1~L3 line. Enter phone number and wait for 3 seconds to dial out automatically. (Default) 3. In ON-Hook state, Dial number and use C key to modify wrong number. After checking correct number, press # key to dial out. Example: Dial other extension number at the same proxy server, for instance, 1008. Just pick up the phone and dial number 1008, than press “#” key or wait 3 seconds to dial out. Dial a PSTN number, ex. 0800024365, maybe need to add prefix code before the phone number. Remark: In the LP399 web management system “Phone” -> “Dial Plan - Basic” web page, check [Dial Plan - Basic] page parameter [Key As Send #], the Settings is Enable or not. 1.6.2.2. Point-to-Point(P2P) Dial Feature Two LP399 IP-Phone devices can call directly without SIP proxy server registration mode. Environmental requirements: Both LP399 IP-Phone device need to use physical static network IP address ; or at the same private LAN network environment, or in a same VPN network. Example: If the called LP399 IP address is 192.168.0.160, dial number as follows: Pick up the phone, dial “192*168*0*160”, then press “#” or wait 3 seconds to finish the P2P call. If the called LP399 IP address is 192.168.1.20 and port is 5062, dial number as follows: Pick up the phone, dial “192*168*1*20**5062”, then press “#” or wait 3 seconds to finish the P2P call. 1.6.2.3. Hold Call In the talking state, press [Hold] key, the phone call will retain immediately. Then, user can select other line to make a new call. 1.6.2.4. Call Waiting In the talking state, If user hear a call waiting tones and LP399 LCD show a new incoming call number at the same time. User can press [Hold] key to retain original call and answer waiting call. During the talking state, User can press [Hold] key again, the original call will be connected. 1.6.2.5. Blind Transfer If user 『A』 and 『B』 are in a phone call, 『A』 will transfer this phone to user 『C』: 1. 『A』 press [Trans] on LP399 device, then 『A』 can hear dial tone. 2. 『A』 enter user 『C』 phone number and press “#” Key (Or wait for 3 seconds). 3. 『A』 can hand up the phone. 1.6.2.6. Attendant Transfer (Answer then Transfer) If user 『A』 and 『B』 are in a phone call, 『A』 will transfer this phone call and talk to user 『C』: 1. 『A』 press [Hold] key, then hear dial tone. 2. 『A』 dial 『C』 phone number and press “#” key (Or wait for 3 seconds). 3. The user 『C』 answer the call and after talk was finished. Then 『A』 press [Transfer] key to complete the transfer feature. 4. If the user 『C』 doesn’t answer, 『A』 can press [Hold] key to return the phone call, then talk Welltech Technology Co., Ltd. 14 / 89 2014/02/11 LAN Phone 399 User Manual 『B』. 1.6.2.7. Conference Call (3-way calling) If user 『A』 and 『B』 are in a phone call, 『A』 want 『C』 to join this meeting: 1. 『A』 press [Hold] key, and hear dial tone. 2. 『A』 dial 『C』 phone number and press “#” key (Or wait for 3 seconds). 3. The user 『C』 answer the call and talk. Then 『A』 press [Conf] key to complete the 3-party conference feature. Now 『A』、『B』、『C』 can talk in a 3-party conference room. 4. If the user 『C』 does not answer, 『A』 can press [Hold] key to return the phone call, then talk to『B』. 5. During the conference call, If 『A』 hand up the phone call, the conference feature will be canceled, the 『B』、『C』 disconnected immediately. Welltech Technology Co., Ltd. 15 / 89 2014/02/11 LAN Phone 399 User Manual 2. Web Page 2.1. Web Login Level Table Web Page Menu Status Phone Phone Book Speed Dial Dial Plan – Basic Dial Plan – Advanced Call Service (Phone Feature) General (Normal Setting) Volume (Volume Setting) Network WAN (Public Ethernet) DDNS (Dynamic DNS) VLAN (VLAN Environment) VPN (PPTP/L2TP Link) NTP (Time Environment) NAT LAN (LAN Network) DMZ & Mac Clone (DMZ and MAC Setting) Virtual Server (Virtual Proxy Server) SIP Service (SIP Register) Codec (Voice Format) Advanced (Other Setting) STUN (STUN & Fource Setting) Management Status Log (System State) Auto Provision (Auto Config Setting) Auto Update (Auto Upgrade Firmware) Firmware (Firmware Upgrade) Advanced (Advance Setting) Password (Login User/Password) Tones (Frequency Setting) Default (Reset To Default) Language (Language Setting) Save & Reboot Logout Engineer Update Administrator Yes System Yes Normal Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No Yes Yes Yes Yes No No Yes No No No No No No No Yes Yes Yes No No 2.2. Login LP399 Web Page LP399 Web Login IP address from LAN port default value is, http://192.168.123.1:9999 Login Accout: Administrator account: root, password: test System account: system, password: test Normal account: user, password: test 2.2.1. Functions Provide login LP399 system management page. Welltech Technology Co., Ltd. 16 / 89 2014/02/11 LAN Phone 399 User Manual 2.2.2. Instruction User Name Password Login [Button] Clear [Button] Enter user name, can be numeral or letters. Enter password, can be numeral or letters. Login LP399 system web page. Clear all information. 2.3. VoIP Setup Manu 2.3.1. Functions Provide functions menu [Status (System information), Phone (Telephony environment), Network (Network environment), NAT (Network Address Translation), SIP (Register environment), Management (Advance Setting), Save & Reboot (Configuration save and reboot device), Logout (Logout web page)]. 2.3.2. Instruction Item Phone Status Phone Network Welltech Technology Co., Ltd. Explanation Shows device type. Provide status of the System. Phone (Telephony environment) Provide function menu[Phone Book, Speed Dial, Dial Plan – Basic, Dial Plan – Advanced, Call Service (Phone function), General (Normal Setting), Volume (Volume Setting)]. Provide [WAN, DDNS, VLAN, VPN(PPTP/L2TP), SNTP] functions. 17 / 89 2014/02/11 LAN Phone 399 User Manual Item NAT SIP Management Save & Reboot Logout Explanation Provide [LAN, DMZ & Mac Clone, Virtual Server] functions. Provide [Service, Code, Advanced, STUN (STUN & Force Setting)] functions. Provide [Status Log, Auto Config, Auto Update, New Firmware , Advanced, Password, Tones, Default, Language] functions. Provide [Save, Reboot] functions. Logout the system. 2.4. Status (System Information) 2.4.1. Functions Show status of Network, Firmware Version and SIP registration. 2.4.2. Instruction Figure 1: LAN Port Device Active: Bridge (Figure 1) Item WAN Information Link Status Active IP Address Subnet Mask Default Gateway Primary DNS Secondsond DNS MAC Address System Information Model Name Version Firmware Version DSP Version Current Time Welltech Technology Co., Ltd. Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Explanation the status of WAN Port. the network connected Speed. the network connected type. IP address of the device. the subnet mask. the default gateway. the primary DNS server. the secondsondary DNS server. the MAC ID. the status of System. Show LP399 model name. Show LP399 firmware version. Shows the firmware version for software control. Shows the DSP version. AC: AC97 WM: Winbound LE: Legeeity NV:Nuvoton Shows the current time. 18 / 89 2014/02/11 LAN Phone 399 User Manual Item Update Date System Up Time Netwrk Link Up Time Register Information Realm 1 Status Display Name Realm 2 Status Display Name Realm 3 Status Display Name Explanation Shows the date of updating system. Shows the system running time. Shows the network running time. Shows the status of SIP register. Shows Shows Shows Shows Shows Shows the the the the the the line line line line line line 1 1 2 2 3 3 register register register register register register state. number. state. number. state. number. Figure 2: LAN Port Device Active: Bridge + VPN (Figure 2) Item WAN Information Link Status Active IP Address Subnet Mask Default Gateway Primary DNS Secondsond DNS MAC Address VPN Information Active IP Address System Information Model Name Version Firmware Version DSP Version Welltech Technology Co., Ltd. Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Explanation the statuses of WAN Port. the network connected Speed. the network connected type. IP address of the device. the subnet mask. the default gateway. the primary DNS server. the secondsondary DNS server. the MAC ID. the status of VPN (PPTP/L2TP) the VPN connected type. the VPN IP address. the status of System. Show LP399 model name. Show LP399 firmware version. Shows the firmware version for software control. Shows the DSP version. 19 / 89 2014/02/11 LAN Phone 399 User Manual Current Time Update Date System Up Time Network Link Up Time Register Information Realm 1 Status Number Realm 2 Status Number Realm 3 Status Number AC: AC97 WM: Winbound LE: Legeeity NV:Nuvoton Shows the current time. Shows the date of updating system. Shows the system running time. Shows the network running time. Shows the status of SIP register. Shows Shows Shows Shows Shows Shows the the the the the the line line line line line line 1 1 2 2 3 3 register register register register register register state. number. state. number. state. number. Figure 3: LAN Port Device Active: Router (Figure 3) Item WAN Information Link Status Active IP Address Subnet Mask Default Gateway Primary DNS Secondsond DNS MAC Address LAN Information IP Address MAC Address System Welltech Technology Co., Ltd. Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Explanation the statuses of WAN Port. the network connected Speed. the network connected type. IP address of the device. the subnet mask. the default gateway. the primary DNS server. the secondsondary DNS server. the MAC ID. the status of LAN Port. the LAN IP address. the LAN MAC ID. the status of System. 20 / 89 2014/02/11 LAN Phone 399 User Manual Item Information Model Name Version Firmware Version DSP Version Current Time Update Date System Up Time Netwrk Link Up Time Register Information Realm 1 Status Number Realm 2 Status Number Realm 3 Status Number Explanation Show LP399 model name. Show LP399 firmware version. Shows the firmware version for software control. Shows the DSPversion. AC: AC97 WM: Winbound LE: Legeeity NV:Nuvoton Shows the current time. Shows the date of updating system. Shows the system running time. Shows the network running time. Shows the statuses of SIP register. Shows Shows Shows Shows Shows Shows the the the the the the line line line line line line 1 1 2 2 3 3 register register register register register register state. number. state. number. state. number. Figure 4: LAN Port Device Active: Router + VPN (Figure 4) Item WAN Information Link Status Active Welltech Technology Co., Ltd. Explanation Shows the statuses of WAN Port. Shows the network connected Speed. Shows the network connected type. 21 / 89 2014/02/11 LAN Phone 399 User Manual Item IP Address Subnet Mask Default Gateway Primary DNS Secondsond DNS MAC Address LAN Information IP Address MAC Address VPN Information Active IP Address System Information Model Name Version Firmware Version DSP Version Current Time Update Date System Up Time Netwrk Link Up Time Register Information Realm 1 Status Number Realm 2 Status Number Realm 3 Status Number Welltech Technology Co., Ltd. Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Shows Explanation IP address of the device. the subnet mask. the default gateway. the primary DNS server. the secondsondary DNS server. the MAC ID. the statuses of LAN Port. the LAN IP address. the LAN MAC ID. the statuses of VPN (PPTP/L2TP) the VPN connected type. the VPN IP address. the statuses of System. Show LP399 model name. Show LP399 firmware version. Shows the firmware version for software control. Shows the DSP version. AC: AC97 WM: Winbound LE: Legeeity NV:Nuvoton Shows the current time. Shows the date of updating system. Shows the system running time. Shows the network running time. Shows the statuses of SIP register. Shows Shows Shows Shows Shows Shows the the the the the the line line line line line line 1 1 2 2 3 3 register register register register register register state. number. state. number. state. number. 22 / 89 2014/02/11 LAN Phone 399 User Manual 2.5. Phone (Telephony environment) Provide functions of [Phone Book, Speed Dial, Dial Plan – Basic, Dial Plan – Advanced, Call Service, Genereal, Volume]. 2.5.1. Phone Book 2.5.1.1. Functions Phone Book can provide 140 entries; Export/Import feature, the file format is csv. When user A dials a [Name], Phone Book will check it on Phone Book. If system finds it, it will dial the [Number] of [Name]. If the [Name] is not on Phone Book, system will dial the number you have dialed. 2.5.1.2. Instruction Item Page Index Name Number/URL Action Submit [Button] Delete All Acess Phone Book Export csv [Button] Import csv [Button] Welltech Technology Co., Ltd. Explanation Default: Page 1. Select the page, from Page1~Page7. Shows the serial number. 140 entries in total, from Phone 0~139. One page has 20 entries. Set up the user’s name. These columns provide the function of speed dial by only enter numbers; maximum length is 31 bytes. Set up the user’s number. These columns can enter numbers and strings; maximum length is 63 bytes. Ex: 0212345678, 0800024365, www.dyndns.info Provide [Delete] button to erase the datas. Save the Settings. Reset all data. Enter “Remote Phone Book Setting” web page. Export [Phone Book] data, the file format is 『.csv』. Import [Phone Book] data, the file format is 『.csv』. 23 / 89 2014/02/11 LAN Phone 399 User Manual Item Export csv [Button] Import csv [Button] HTTP or TFTP Server Address Synchronlzation period Submit [Button] Explanation Export [Phone Book] data, the file format is 『.csv』. Import [Phone Book] data, the file format is 『.csv』. Use HTTP or TFTP server to upgrade LP399’s phone book data. The LP399 will reference this time to upgrade phone book data at HTTP or TFTP server by itself. Save the Settings. 2.5.1.3. Operate Instruction Example 1: Setup [Phone Book] data Step 1: On the [Phone Book Setting] page, Setup [Index: 1, Name: 301, Number: 301@192.168.1.2; Index: 2, Name: 206, Number: 1747643364; Index: 3, Name: test, Number: 8123478944566] (See Figure 1). (Figure 1) Instruction 1: Dial [301], system find the [301] on Index 1, then system dial Name’s Number of Index 1. System will dial [192.168.1.2] Instruction 2: Dial [206], system find the [206] on Index 2, then system dial Name’s Number of Index 2. System will dial [17476433364]. Instruction 3: Because Index 3’s Name is a string, so the speed dial function can not be used, you can just check the Index 3’ Name and Number. Example 2: Export / Import [Phone Book] data Export Feature Step 1: In [Phone Book Setting] web page, the page have two numbers data. (See Figure 2). Welltech Technology Co., Ltd. 24 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 2) Step 2: To perform the export function, please press [Export csv] button (See Figure 3). (Figure 3) Step 3: Monitor show [File Download] page, default file name is phbook.csv, select [Save] button, LP399 parameter will save to 『.csv』file format (See Figure 4). (Figure 4) Step 4: Open the file, then check [Phone Book] number data (See Figure 5). (Figure 5) Import Featuer Step 1: Set up 『.csv』 format for [Phone Book] data (See Figure 6). Welltech Technology Co., Ltd. 25 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 6) Step 2: In [Phone Book Setting] web page, choose the phone book file data to load [example: F:\Test\phbook.csv], press [Import csv)] button (See Figure 7). (Figure 7) Step 3: Load data finish, [Index: 1 and 2] will show phone book data (See Figure 8). (Figure 8) Example 3: LP399 LCD Monitor Function Step 1: In [Phone Book Setting] web page, Setup [Index: 1, Name: Cat 1, Number/URL: 102, Index: 2, Name: Me To, Number/URL: 103] (See Figure 9). (Figure 9) Step 2: In [Service Domain Setting] web page, Setup [Realm Active: Enable, Display Name: 102, Phoner Number: 102, Authentication ID: 102, Authentication Password: test, Domain Server: 192.168.68.150, Proxy Server: 192.168.68.150] (See Figure 10)。 Note : Both registered account [Display Name] and [Authentication ID] must be the same (See Figure 10) to take effect. (Figure 10) Welltech Technology Co., Ltd. 26 / 89 2014/02/11 LAN Phone 399 User Manual Step 3: When LP399 receives 102 incoming call, LCD can show [Me To, 102] incoming call message automatically. 2.5.2. Speed Dial 2.5.2.1. Functions Provide to Set [Pick-up] and [Voice Mail] key code. If there is no function key corresponding, The service can’t take effect. 2.5.2.2. Instruction Item Index Name Number/URL Action Pick Up Voice Mail Submit [Button] Delete All [Button] Explanation This Index number is the one on LCD icon number. Set up extension account data. These columns can enter numbers and strings; maximum length is 31 bytes. Set up the user’s number. These columns can enter numbers and strings; maximum length is 63 bytes. Provide [Delete] button to clear Setting data. Setup [Pick Up] feature code. This code must be compatible with IP-PBX server Pick-Up code. These columns can enter numbers and strings (*#), maximum length is 15 bytes. Set up [Voice Mail] feature code. This code must be compatible with IP-PBX server [Voice Mail] service code. These columns can enter numbers and strings (*#), maximum length is 15 bytes. Save the Settings. Reset all data. 2.5.2.3. Operate Instruction Example 1: [Pick Up & Voice mail] Button Step 1: In [Speed Dial Setting] web page, Setup [Pick up: *98, Voice Mail: *97] (See Figure 1). Welltech Technology Co., Ltd. 27 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 1) Description 1: Need to pick up nearby ring phone call, please press LP399 [Pick] key, LP399 will pick up nearby ringing phone (This phone must stay at the same pick up group). Description 2: Execution and listen voice mail messages, press [VMS] key to enter voice mail process. 2.5.3. Dial Plan - Basic 2.5.3.1. Functions Dial Plan Provide Dial Now, Realm Prefix, Auto Dial Time, Use # as send Key. 2.5.3.2. Instruction Figure 1: LP399 device (Figure 1) Item Use Dial Plan Explanation Default is Basic dial plan Setting. Select dial function mode. When select Advanced, the dial function will use Dial Plan - Advanced web page Setting. Provide drop-down options: Basic, Advanced. Basic: Use basic web page Dial Plan and Dial Now rules. Advanced: Use Dial Plan - Advanced rules; Disabled [Dial Plan & Dial Now] Setting field automatically. Dial Plan Setup dialing properties to add number or Replace Number. Index Shows the serial number. Provide 4 sets to add numbers or drop numbers. Welltech Technology Co., Ltd. 28 / 89 2014/02/11 LAN Phone 399 User Manual Item Drop Prefix Explanation Default: Disable 。 When Setting up Enable and encountering the matched rule, the [Prefix] will be replaced by the dialing number。 When Setting up Disable, and encountering the matched rule, the [Pefix] will be added in front of the dialing number. Prefix Setup the number to add or drop. These clolumes can enter numbers; maximum length is 8 bytes. Replace Rule Setup the matched rule. This column can enter numbers or signs; maximum length is 40 bytes. Sign: [+, x]. + represents “or”. For example: 123+456+334+5xx, it represents “123” or “456” or “334” or “5xx”. x: 0~9, for example: 5xx,if the first dialing number is “5”, [Prefix] will replace or add it. Note: This dial rule is 『x+number』combination. If the dial number is fully compliance with the code length, the dial replace rule does not running. Dial Now Setup speed dial specification rules. Index Shows the serial number. Provide 8 sets for Dial Plan. Dial Now Rule Provide the rules for dialing at once. When encountering the matched rule, system will dial number at once without receiving “#” or waiting past [Auto Dial Time]. This column can enter numbers or signs; maximum length is 80 bytes. Sign: [*, #, +, x]. + represent “or”. x: 0~9. Realm 1 Area Code Deafult: 1*; Change to use first [Realm] account. Realm 2 Area Code Deafult: 2*; Change to use second [Realm] account. Realm 3 Area Code Deafult: 3*; Change to use third [Realm] account. Realm 4 Area Code Deafult: 4*; Change to use fourth [Realm] account. Realm 5 Area Code Deafult: 5*; Change to use fifth [Realm] account. Inter Digit Time Default: 3 seconds. After waiting for a while, but didn’t enter any number, Auto Dial will run automatically. Inter Digit Time period: (3~9 seconds). Provide option 3~9. Key As Send# Default: Enable. Configure # key as Send Out command key after dial number. If you select Disable at this option, The dial number will wait for your desire Inter Digit Time to send out. # Format is %23 Default is Disable; Use [#] word to send %23 singal. Provide drop-down options: Disable, Enable. Enable: Use [#] word to send %23 singal. Submit [Button] Save the Settings. 2.5.3.3. Operate Instruction Welltech Technology Co., Ltd. 29 / 89 2014/02/11 LAN Phone 399 User Manual Example 1: Drop Prefix & Dial Now Function Step 1: In [Dial Plan Setting] web page, Setup [Use Dial Plan: Basic, Index: 1, Drop prefix: Disable, Prefix: 002, Rule: 8613+8662; Index: 2, Drop prefix: Enable, Prefix: 006, Rule: 002+003+004+005+007+009; Index: 3, Drop prefix: Disable, Prefix: Replace: 009, Rule: 12; Index: 4, Drop prefix: Disable, Prefix: 007, Rule: 53+35xx +21xx. Index: 1, Dial Now Rule: *xx +#xx+11x +xxxxxxxx] (See Figure 1). (Figure 1) Instruction 1: Application 1: When dialing [8613xxxx], all numbers that begin with 8613, will be added with 002, so actually the dialing number is [002+8613+xxx]. Application 2: When dialing [8662xxxx], all numbers that begin with 8662, will be added with 002, so actually the dialing number is [002+8662+xxx]. Instruction 2: Application 1: When enter [002+86xxxx] and all numbers replaced by 006; so actually the dialing number is Application 2: When enter [003+77xxxx] and all numbers replaced by 006; so actually the dialing number is that begin with 002 will be [006+86xxx]. that begin with 003 will be [006+77xxx]. Instruction 3: Drop prefix: Disable, Replace rule: 009, Rule: 12。 Application 1: When enter [12xxxx], and all numbers that begin with 12, will be added with 009; so actually the dialing number is [009+12+xxx]. Instruction 4: Application 1: When enter [53789], and all numbers that begin with 53, will be added with 007; so actually the dialing number is [007+53789]. Application 2: When enter [3507], and all numbers that begin with 35, will be added with 007; so actually the dialing number is [007+3507]. Application 3: When enter [2199], and all numbers that begin with 21, will be added with 007; so actually the dialing number is [007+2199]. Instruction 5: Application 1: Any information that meet the condition “*xx” will be sent out immediately, like [*00, *01, *02… *99]. Application 2: Any information that meet the condition” #xx” will be sent out immediately, like [#00, #01, #02…#99]. Application 3: Any information that meet the condition ”11x” will be sent out immediately, like [110, 111, 112 … 119]. Application 4: If enter 8 digit numbers, the system will send out the number immediately. E.g.: 12345678. Example 2: # Format is %23 Function Step 1: In [Dial Plan Setting] web page, Setup [Key As Send#: Disalbe, # Format is %23: Enable] (See Figure4). Welltech Technology Co., Ltd. 30 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 4) Step 2: Pick up the handset, Dial [123#], the correct dialing content is [123%23]. 2.5.4.Dial Plan – Advanced 2.5.4.1. Functions Provide advanced Setting: Add number and Drop number or Speed Dial function rules. 2.5.4.2. Instruction (Figure 1) Item Use Dial Plan Welltech Technology Co., Ltd. Explanation Default is Basic ; Select dial function mode. When select Advanced, the dial function will use Dial Plan - Advanced web page Setting. Provides drop-down options: Basic, Advanced. Basic: Use basic web page Dial Plan & Dial Now rules. Advanced: Use Dial Plan - Advanced rules; Disabled [Dial Plan & Dial Now] Setting field automatically. 31 / 89 2014/02/11 LAN Phone 399 User Manual Item Page Index Rule Submit [Button] Explanation Default is 1. Select pages, Provide drop-down options: 1~5. Shows the serial number. 200 entries in total, from Phone 0~139. A page have 40 entries. Setup Add / Drop code or Speed Dial rules. User can enter numbers or symbols (only support: 0~9, *, #, -, x, [, ], ; ). Maximum length is 32 bytes. Data format: PATTERN;PREFIX;DIALCUT; The “;” is entered as location separator. It is always needed in this rule. PATTERN: Enter Add / Drop code or Speed Dial rules (only support: 0~9, *, #, -, x, [, ], ; ); maximum length is 20 bytes. When the dial number meet dialing rules field, user don’t use the [#] key, the device will dial the phone number automatically. PREFIX: Enter the phone number user need to Add code, (only support: 0~9, *, #), or keep null; maximum length is 20 bytes. DIALCUT: Enter the phone number user need to drop code 『quantity』, (only support: 0~9), or keep null; maximum length is 2 bytes. Example 1: Rule: [2345679]xxxxxx;02;; 。 Example 2: Rule: 800[0-9]xxxx;;; Example 3: Rule: #88;0427121234;3; Save the Settings. 2.5.4.3. Operate Instruction Example 1: Index: 1, Rule: [2345679]xxxxxx;02;; Step 1: In [Dial Plan Setting - Advanced] web page, Setup [Use Dial Plan: Advanced, Index: 1, Rule: [2345679]xxxxxx;02;;] (See Figure 1). (Figure 1) Instruction 1: When dial number is [2+123456], Meet [Rule] field parameter [2345679]xxxxxx rules, Stop to receive number immediately; Add prefix code [02] before [2+123456] automatically. Actually sending number is [02+2+123456] (See Figure 1)。 Instruction 2: When dialing content [3+123456] at the beginning, Meet [Rule] field [2345679]xxxxxx rules, Stop to receive number immediately. Add prefix code [02] before [3+123456]. Actually send number is [02+3+123456]. Example 2: Index: 2, Rule: 800[0-9]xxxx;;; Step 1: In [Dial Plan Setting - Advanced] web page, Setup [Index: 2, Rule: 800[0-9]xxxx;;;] (See Figure 1). Instruction 1: When dial number is [800+1+2345], Meet [Rule] field 800[0-9]xxxx rules, Stop to receive number immediately. The device dials phone number [800+1+2345] automatically. Instruction 2: When dial number is [800+7+2345], Meet [Rule] field 800[0-9]xxxx rules, Stop to receive number immediately. The device dials phone number [800+7+2345] automatically. Example 3: Index: 3, Rule: #88;0427121234;3; Step 1: In [Dial Plan Setting - Advanced] web page, Set up [Index: 3, Rule: #88;0427121234;3;] (See Figure 2). (Figure 2) Welltech Technology Co., Ltd. 32 / 89 2014/02/11 LAN Phone 399 User Manual Instruction 1: When dial number is [#88], Meet [Rule] field #88 rules, Stop to receive number immediately. Delete 3 numbers (#88). Then add number [0427121234], Actually sending number is [0427121234]. Example 4: Index: 4, Rule: #87;0427121234;2; Step 1: In [Dial Plan Setting - Advanced] web page, Setup [Index: 4, Rule: #87;0427121234;2;] (See Figure 2). Instruction 1: When dialing number is [#87] , meet [Rule] field #87 rules. Stop to receive number immediately. Delete 2 numbers (#8). Then add prefix number [0427121234] before [7], Actually sending number is [0427121234+7]. 2.5.5. Call Service (Phone Feature) 2.5.5.1. Functions Provide Forward (Transfer), Hotline, DND (Do Not Disturb) and Alarm. 2.5.5.2. Instruction Figure 1: LP399 Device (Figure 1) Item Forward Type Explanation Default: Disable. Provide option: Disable, All, Busy, No Answer, Busy or No Answer. *Please check the Forward function supported by IP-PBX or SIP Server. Forward Number These columns can enter numbers or strings. Maximum length is 63 bytes. Rings Default: 3 Rings. When ringing 3 ring cycles and no one answers. It was regarded as no one answers the call. Provide option 2~8 Rings. This function only support No Answer or Busy functions. Hotline Type Default: Disable. When Setting Enable, once pick up the phone, it dials the pre-defined phone number automatically. Hotline Number Setup Hotline Number, it can be numbers or address. This column can enter numbers or string. Maximum length is 63 bytes. For Example, IP address: 192.168.1.23, or phone number: Welltech Technology Co., Ltd. 33 / 89 2014/02/11 LAN Phone 399 User Manual Item Explanation 0800024365. Delay Default time is 3 seconds. When picking up the phone handset, LP399 dials the Hotline Number automatically after delay predefined seconds was expired. Provide option 0~6 seconds. DND Type Default: Disable. DND Setting allows denying all incoming calls (SIP Status: 486 Busy Here) or denies all incoming calls in a certain time period. Provide option: Disable, Always, Period (by Setting time). During the DND (Do Not Disturb) Default: From 0:0 (start) To 0:0 (end). These 4 columns can only enter numbers. Maximum length is 2 bytes respectively. Alarm Type Default: Disable. When Setting Enable, alarm function will be executed. Duration is 1 minute. Stop the alarm by picking up the handset. Provide option: Disable, Enable. Alarm Time Default: 0:0 (hh:mm). These 2 columns can only enter numbers. Maximum length is 2 bytes respectively. Submit [Button] Save the settings. 2.5.5.3. Operate Instruction Example 1: Forward Feature All (Unconditional Forward) Step 1: In [Call Service Setting] web page, Setup [ Forward Type: All, Forward Number: 812345678] (See Figure 1). (Figure 1) Step 2: When receiving a new incoming call, LP399 will forward to this number [Forward Number: 812345678] automatically. Busy (Busy Forward) Step 1: In [Call Service Setting] web page, Setup [Forward Type: Busy, Forward Number: 405] (See Figure 2). (Figure 2) Step 2: When LP399 is busy, it will forward to [Forward Number: 405] automatically. No Answer (No Answer Forward) Step 1: In [Call Service Setting] web page, Setup [Forward Type: No Answer, Forward Number: 031237788, Rings: 3] (See Figure 3). Welltech Technology Co., Ltd. 34 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 3) Step 2: When LP399 rings 3 times and nobody answer the phone, it will forward to [Forward Number: 031237788]. Busy or No Answer (Busy Forward & No Answer Forward) Step 1: In [Call Service Setting] web page, Setup [Forward Type: Busy or No Answer, Forward Number: 0800024365, Rings: 3] (See Figure 4). (Figure 4) Step 2: When LP399 rings 3 times and if nobody answer the phone or the phone is busy, it will forward to [Forward Number: 0800024365]. Example 2: Hotline Feature Dial SIP Account Step 1: In [Call Service Setting] web page, Setup [Hotline Type: Enable, Hot Line number: 82341234, Delay: 3] (See Figure 6). (Figure 6) Step 2: When picking up LP399 phone and wait for 3 seconds delay time, it will dial to [Hot Line number: 82341234] automatically. Dial IP Address Step 1: In [Call Service Setting] web page, Setup [Hotline Type: Enable, Hot Line number: 192.168.50.4, Delay: 3] (See Figure 7). (Figure 7) Step 2: When picking up LP399 phone and wait for 3 seconds delay time, it will dial to [Hot Line number: 192.168.50.4] automatically. Example 3: DND Feature Period Step 1: In [Call Service Setting] web page, Setup [DND Type: Period, During the DND From: 18:15, To: 22:20] (See Figure 8). (Figure 8) Step 2: When receiving a new call during DND time period, the caller will hear “busy tone”. Always Step 1: In [Call Service Setting] web page, Setup [DND Type: Always] (See Figure 9). (Figure 9) Step 2: When receiving a new call, the caller will hear “busy tone”. Example 4: Alarm Feature Welltech Technology Co., Ltd. 35 / 89 2014/02/11 LAN Phone 399 User Manual Step 1: In [Call Service Setting] web page, Setup [Alarm Type: Enable, Alarm Time: 21:00] (See Figure 10). (Figure 10) Step 2: At 21:00 everyday, the alarm will start to work and last for 1 minute. After 1 minute, the alarm will stop. During ringing and pick up the phone, the alarm will stop automatically. 2.5.6. General (Normal Setting) 2.5.6.1. Functions General Provide Caller ID, Call Waiting, Auto Answer and etc. 2.5.6.2. Instruction Figure 1: LP399 Device (Figure 1) Item Call Waiting Ring Timeout Auto Anwser Call Auto On-Hook After Bye Mute After Auto Answer Submit [Button] Welltech Technology Co., Ltd. Explanation Default: Enable. When Setting up Call Waiting Enable and an incoming call arrives, you will hear a waiting tone. If you want to answer this waiting call, you need to press the key [Hold] to hold existing call and answer incoming call. Provide options: Disable, Enable. Default: 60 seconds. LP399 Phone will send a stop message to the caller when the Ring Timeout was expired. Provide options: 20, 40, 60, 80, 120, 180 and 240. Default: Disable. If you Enable this function and when receiving an incoming call, LP399 phone will answer the call automatically and enable Loud Speaker Phone feature. Provide options: Disable, No Ring (auto answer), or 1,2,3,4,5 rings. Default: 30 (seconds). LP399 phone will auto On-hook (drop this call) when it received a bye message after configured time was expired. Provide options: 0, 5, 10, 20, 30. Default: Disable. If you Enable this function, LP399 phone will activate mute feature after it answer a call automatically. Provide options: Disable, Enable. Save the settings. 36 / 89 2014/02/11 LAN Phone 399 User Manual 2.5.7. Volume 2.5.7.1. Functions Volume can setup received volume and transmitted gain and ring type of this LP399 IP Phone. 2.5.7.2. Instruction Figure 1: LP399 Device (Figure 1) Item Handset Volume Handset Gain Speaker Volume Speaker Gain Ringer Volume Ring Type Submit [Button] Explanation Default: 10. Setup your handset receiving volume. Provide options: 0~14. Default: 10. Setup the handset microphone gain. Provide options: 0~14. Default: 10. Setup Spearker volume at Loud Speaker phone mode. Provide options: 0~14. Default: 10. Setup the microphone gain at Loud Speaker phone mode. Provide options: 0~14. Default: 6. Setup incoming Ring volume. Provide options: 0~10. Default: Ring Tone. Provide options: Ring Tone, Melody 1, Melody 2, Melody 3. Ring Tone: Refer to Tones setting argument [Ring Tone]. Save the settings. 2.5.7.3. Operate Instruction Example 1: Ring Type Step 1: In [Genereal Setting] web page, Set up [Ringer Type: Melody 3] (See Figure 1). (Figure 1) Step 2: When receiving an incoming call, you will listen a different ring. Welltech Technology Co., Ltd. 37 / 89 2014/02/11 LAN Phone 399 User Manual 2.6. Network Provide functions of [WAN, DDNS, VLAN, VPN, NTP]. 2.6.1 WAN 2.6.1.1. Functions WAN provides function to set up WAN port network IP address with fixed IP, DHCP Client and PPPoE. 2.6.1.2. Instruction Item WAN Active Explanation Default: DHCP Client. Setup the network connecting type including fixed IP, DHCP Client and PPPoE. Fixed IP: Enter a static IP address. DHCP Client: Get IP address from DHCP server. PPPoE: Uses PPPoE to connect IP network. Provide options: Fixed IP, DHCP Client, and PPPoE. IP Address Show the current IP address, enter type is xxx.xxx.xxx.xxx of 15 bytes. *If you want to setup the IP address, please Setup [TYPE] to [Fixed IP] first. Then you can enter IP address. Subnet Mask Shows the current Subnet Mask IP Address, the enter type is xxx.xxx.xxx.xxx of 15 bytes. Default Gateway Shows current Default Gateway IP Address, the enter type is xxx.xxx.xxx.xxx of 15 bytes. DNS Active Default: Auto. Fixed: Setup DNS Server address. Auto: Get DNS Server address from DHCP Server and this option only supports DHCP Client and PPPoE. Provide options: Fixed, Auto. Primary DNS Default: 168.95.192.1. The enter type is xxx.xxx.xxx.xxx of 15 bytes. Secondsond DNS Default: 168.95.1.1. The enter type is xxx.xxx.xxx.xxx of 15 bytes. MAC Address Shows the MAC ID address. System Name Default: VOIP_Phone. Welltech Technology Co., Ltd. 38 / 89 2014/02/11 LAN Phone 399 User Manual Item PPPoE User PPPoE Password PPPoE Service Name PPPoE AC Name Submit [Button] Explanation This column can enter numbers and strings; maximum length is 15 bytes. This column can enter numbers and strings; maximum length is 32 bytes. This column can enter numbers and strings; maximum length is 32 bytes. This column can enter numbers and strings; maximum length is 32 bytes. *The information of this column is provided by ISP, if you don’t known what is the data, do not Setup it. This column can enter numbers and strings; maximum length is 32 bytes. *The data of this column is provided by ISP, if you don’t known what is the data, do not setup it. Save the settings. 2.6.1.3. Operate Instruction Example 1: Check Host Name Step 1: In [WAN Setting] web page, Setup [WAN Active: DHCP, System Name: VOIP_PHONE] (See Figure 1). (Figure 1) Step 2: In [System Status] web page, User can view [WAN] port network status (See Figure 2). (Figure 2) Example 2: Check PPPoE Service Name & AC Name Step 1: In [WAN Setting] web page, Setup [WAN Active: PPPoE, PPPoE User: test@hinet.net, PPPoE Password: test] (See Figure 3). Welltech Technology Co., Ltd. 39 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 3) Step 2: In [System Status] web page, User can view [WAN] port network status [Type: PPPoE Client] (See Figure 4). (Figure 4) 2.6.2. DDNS (Dynamic DNS Settings) 2.6.2.1. Function DDNS Provide functions to Setup DDNS client. 2.6.2.2. Instruction Item DDNS Active Welltech Technology Co., Ltd. Explanation Default: Disable. 40 / 89 2014/02/11 LAN Phone 399 User Manual Item Host Name User Name Password E-mail Address DDNS Server List DDNS Server Dynamic DNS Type Wild Card BACKMX Off Line Submit [Button] Explanation Provide options: Disable, Enable. Host name can be IP Address or Domain Name. This column can enter numbers and strings; maximum length is 63 bytes. Enter user’s name for registering DDNS Server. This column can enter numbers and strings; maximum length is 63 bytes. Enter user’s password to register DDNS Server. This column can enter numbers and strings; maximum length is 63 bytes. Enter E-mail address. This column can enter numbers and strings; maximum length is 63 bytes. Default: members.dyndns.org. Display DDNS server’s name list information. Provide options: Custom (user enter), members.dyndns.rog, www.dtdns.com. DDNS Server can be IP Address or Domain Name. This column can be numbers and strings; maximum length is 63 bytes. Default: dyndns. Provide options: dyndns, statdns and Custom. If you choose Custom, you can change the type information.* Default: Enable. Provide: Disable, Enable, nochg.* Default: Enable. Provide: Disable, Enable.* Default: Enable. Provide: Disable, Enable.* Save the Settings. *: 1.Not all DNS providers can support this function. If you want to use this function, please contact with your provider. 2.Query DNS data did not update in real time because of the DNS server updated cycle time. Please make sure the DNS server updated correct time or login DNS server to check if the IP address is correct or not. 2.6.3. VLAN (VLAN Environment Settings) 2.6.3.1. Functions VLAN Provides functions to Setup VLAN including Network, SIP and RTP. These functions must work with a VLAN Router. 2.6.3.2. Instruction Welltech Technology Co., Ltd. 41 / 89 2014/02/11 LAN Phone 399 User Manual Item Network (Both WAN & LAN) VLAN Active VID (802.1Q/ TAG) User Priority (802.1P) SIP & RTP SIP VID SIP User Priority (802.1P) RTP VID RTP User Priority (802.1P) Submit [Button] Explanation Set up VLAN functions. Default: Disable; When Enabling this function, receiving VALN Packets function will be started. Provide: Disable, Enable. Default: 136; Provide Virtual LAN ID (VLAN or VID) for VLAN Server. This column can only be numbers; maximum length is 4 bytes with the range 3~4094. Default: 0; This column can only be number; maximum length is 1 bytes with the range 0~7. Setup the VLAN function of SIP & RTP Default: 0; If you Enable this function, SIP ethereal packages will contain VLAN ID instead of Enabling VLAN Packets. This column can only be numbers; maximum length is 4 bytes with the range 3~4094, and 0 is Disable. Default: 0. Provide options: 0~7. Default: 0; If you Enable this function, RTP ethereal packages will contain VLAN ID instead of Enabling VLAN Packets. This column can only enter numbers; maximum length is 4 bytes with the range 3~4094, and 0 is Disable. Default: 0. Provide options: 0~7. Save the Settings. 2.6.4. VPN (PPTP/L2TP Link Type) 2.6.4.1. Functions VPN Provide functions to Setup PPTP/L2TP. Note: After you have enabled the VPN functions, you could login in LP399 to configure via LAN port. 2.6.4.2. Instruction Welltech Technology Co., Ltd. 42 / 89 2014/02/11 LAN Phone 399 User Manual Item VPN Active Server Name User Name Password Port Submit [Button] Explanation Default: Disable; Setup the network connecting type of PTP/L2TP. Provide options: Disable, PPTP, L2TP. Enter connecting VPN Server address. This column can enter IP or Domain Name with the format at xxx.xxx.xxx.xxx; maximum length is 63 bytes. This is user’s name. This column can be numbers of strings; maximum length is 63 bytes. This is user’s password. This column can be numbers of strings; maximum length is 63 bytes. Default: Disable, Port: 1723. Setup the Port Number of PPTP. When you select Custom, you can enter the Port Number of PPTP by yourself. This column can only enter numbers; maximum length is 5 bytes with the range 1024~65535. Provide options: Default, Custom. Save the Settings. 2.6.4.3. Special Instruction PPTP or L2TP don’t support CCP compression and IPSEC encryption. Description: If it is not successfully to dial-up, please disable [CCP] function because LP399 don’t support [CCP] function. If you are using Ubuntu Linux platform, Please modify the following instructions. Modify pptpd-options Use vim edit pptpd.options, Command: sudo vim /etc/ppp/pptpd.options pptpd.options file contents: # Network and Routing # If pppd is acting as a server for Microsoft Windows clients, this # option allows pppd to supply one or two DNS (Domain Name Server) # addresses to the clients. The first instance of this option # specifies the primary DNS address; the secondsond instance (if given) # specifies the secondsondary DNS address. # Attention! This information may not be taken into account by a Windows # client. See KB311218 in Microsoft's knowledge base for more information. ms-dns 168.95.192.1 ms-dns 168.95.1.1 noccp About the middle of the file content, Please find a parameter #ms-dns, delete #. Then assign VPN users DNS Server address. For example is Chunghwa telecom DNS, ms-dns 168.95.192.1. Welltech Technology Co., Ltd. 43 / 89 2014/02/11 LAN Phone 399 User Manual The first #ms-dns, there is another #ms-dns in next line, If you want to use one DNS only, you don’t care this line. Instead, please remove the #, Fill secondsond DNS Server address. For example is Chunghwa telecom DNS, ms-dns 168.95.1.1. And then add this command noccp on the next line, Because CPU of LP399 do not support VPN IPSEC file compression. If the file does not add this line, the deivce can not get VPN IP address. Example 1: VPN Disable IPSEC Feature Edit xl2tpd.conf file Use vim edit xl2tpd.conf, Command: sudo vim /etc/xl2tpd.conf [global] ipseconds saref = no [lns default] ip range = 192.168.50.136-192.168.50.140 local ip = 192.168.50.120 require chap = yes require authentication = yes pppoptfile = /etc/ppp/options.xl2tpd ppp debug = yes Do not support IPSEC. Please enter this command [ipsec saref = no] to disable this function. Because CPU do not support VPN IPSEC encryption function. If the file does not add this line, LP399 IP Phone can not get VPN IP address. 2.6.5. NTP (Time Environment) 2.6.5.1. Functions NTP Provide functions to Setup Time and Daylight Saving. 2.6.5.2. Instruction Item NTP Active Welltech Technology Co., Ltd. Explanation Default: Enable; When Enable this function, the SNTP is on. 44 / 89 2014/02/11 LAN Phone 399 User Manual Item Primary NTP Secondsondary NTP Time Zone Update Interval Manually Time Date & Time Get PC Time [Button] Daylight Saving Time OffSet up Start Time End Time Submit [Button] Welltech Technology Co., Ltd. Explanation Provide options: Disable, Enable. Default: north-america.pool.ntp.org. This column can enter IP or Domain Name with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. Default: asia.pool.ntp.org. This column can enter IP or Domain Name with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. Default: GMT + 08:00 (hh:mm) and the format is (+/-, hh:mm). Provide options: +/-, 0~13(hh), 00, 15, 30, 45(mm). Default: 6; Sync. Time will be checked with NTP Server according to the interval you have setup. Provide options: 1 min., 5 min., 30 min., 1 hour, 3 hour, 6 hour, 12 hour, 24 hour. When enable this time function manually, Daylight Saving Time function will be disabled. Note: If LP399 electric power was removed, this time will be lost. Year; Setup the Year; Only use number, Data Settings secondstion is 2011~2022, maximum length is 4 bytes. Month; Setup the Month; Only use number, Data Settings secondstion is 1~12, maximum length is 2 bytes. Date; Setup Date; Only use number, Data Settings secondstion is 1~31, maximum length is 2 bytes. Hour; Setup Hour; Only use number, Data Settings secondstion is 0~23, maximum length is 2 bytes. Minute; Setup Minute; Only use number, Data Settings secondstion is 0~59, maximum length is 2 bytes. Secondsond; Setup Secondsond; Only use number, Data Settings secondstion is 0~59, maximum length is 2 bytes. Get local personal computer date and time information. Default: Disable. When Enable this function, the Daylight Saving is on. Provide options: Disable, Enable. Default: +2 Hour. Set up the Daylight Saving Time difference. Provide options: -2 hour, -1 hour, +1 hour, +2 hour. Setup Daylight Saving Time. You can select the start date by day or week. Setup beginning month: Default Setting is January. Here offers options from January to December. Day of Month:Default Setting is 01. Here Provide options from 1th to 31th. Week of Month: Selects the effective week. Here Provide options for Last Week, Last Secondsond Week, Week1, Week2 and Week3。 Day:Provide options: Sun, Mon, Tue, Wed, Thu, Fri, Sat. Start Time:00~23. Stop Daylight Saving Time Setting. You can select the end date by day or week. Setup ending month: Default Setting is January. Here offer options froms Jan to Dec. Day of Month:Default Setting is 01. Here Provide options from 1th to 31th. Week of Month: Selects the effective week. Here Provide options for Last Week, Last Secondsond Week, Week1, Week2 and Week3。 Day:Provide options: Sun, Mon, Tue, Wed, Thu, Fri, Sat. Start Time:00~23. Save the Settings. 45 / 89 2014/02/11 LAN Phone 399 User Manual 2.6.5.3 Operate Instruction Example 1: NTP Setting Step 1: In [NTP Setting] web page, Setup [NTP Active: Auto, Primary NTP: north-america.pool.ntp.org, Secondsondary NTP: asia.pool.ntp.org, Time Zone: GMT+ 08:00, Update Interval: 6 Hour] (See Figure 1). (Figure 1) Step 2: In [System Status] web page, View the [Current Time] field, The field show time information now (See Figure 2). (Figure 2) Example 2: DST Setting (Daylight Saving Time) Step 1: In [NTP Setting] web page, Setup [NTP Active: Auto, Primary NTP: north-america.pool.ntp.org, Secondsondary NTP: asia.pool.ntp.org, Time Zone: GMT+ 08:00, Update Interval: 6 Hour, Daylight Saving Time: Enable, OffSet up: +1 Hour, Start Time: Aug, By Week, Last Week, Mon, 01, End Time: Oct, By Week, Last Week, Fri, 18] (See Figure 3). (Figure 3) Step 2: In [System Status] web page, View the [Current Time] field, The field show [Daylight Saving Time] time information. Example 3: Manually Setup NTP Step 1: In [NTP Setting] web page, Setup [NTP Active: Manual] , Press [Get PC Time] button to get personal computer’s date and time (For example : Date & Time: 2005 Year, 1 Month, Welltech Technology Co., Ltd. 46 / 89 2014/02/11 LAN Phone 399 User Manual 1 Date, 0 Hour, 0 Min, 23 secondsond) (See Figure4). (Figure 4) Step 2: In [System Status] web page, View the [Current Time] field, The field show [Manually Time] time information (See Figure 5). (Figure 5) Welltech Technology Co., Ltd. 47 / 89 2014/02/11 LAN Phone 399 User Manual 2.7. NAT (NAT Environment) Provide function of [LAN, DMZ & MAC Clone, Virtual Server]. 2.7.1. LAN (LAN Network Setting) 2.7.1.1. Functions LAN Provides functions including DHCP Server. 2.7.1.2. Instruction Item Device Active LAN IP Address LAN MAC Address Enable DHCP Server IP Address Lease Time Submit [Button] Index Welltech Technology Co., Ltd. Explanation Default: NAT. Setup the routing function of LAN Port. Provide options: Bridge, NAT. Bridge: When you Setup Bridge, [WAN & LAN] Port are all in the same IP domain, just like in the same network switch. NAT: When you Setup NAT, [WAN & LAN] Port are in the different IP domain. LAN Port work as DHCP server when you Enable DHCP Server Active function. Default: 192.168.123.1. The type is xxx.xxx.xxx.xxx of 15 bytes. Show LAN MAD ID address. Default: Enable; When you Disable this function, LAN Port will not be a DHCP Server. Provide options: Enable, Disable. Default: 150~200; Setup the IP address range of DHCP Server. This column can only be numbers; maximum length is 3 bytes with the range of 1~254. Default is 1440 (min), IP address rented deadline. Only use number, Data setting range is 10~17820, maximum length is 5 bytes. Save the Settings. Shows the serial number. 48 / 89 2014/02/11 LAN Phone 399 User Manual Assign IP Address MAC Address Lease Time(sec) Refresh [Button] LP399 DHCP server appoint IP address. Connect LP399 LAN port device’s MAC address. LAN port device connection time. Reload DHCP device status. 2.7.1.3. Operate Instruction Example 1: LAN Mode: Bridge Step 1: In [LAN Setting] web page, Setup [Device Active: Bridge] (See Figure 3). (Figure 3) Step 2: In [System Status] web page, [LAN Inofrmation] was no show. (See Figure 4). (Figure 4) 2.7.2. DMZ & MAC Clone (DMZ & MAC Setting) 2.7.2.1. Functions DMZ & MAC Clone Provide functions to Setup DMZ and MAC Clone. 2.7.2.2. Instruction Item Welltech Technology Co., Ltd. Explanation 49 / 89 2014/02/11 LAN Phone 399 User Manual DMZ Active DMZ IP Address MAC Clone Active Submit [Button] Defualt: Disable; When you Enable this function, all the incoming packages will transfer to the assigned IP address. Provide options: Disable, Enable. Default: 0.0.0.0. The assigned IP address type is xxx.xxx.xxx.xxx of maximum 15 bytes. Default: Disable; When you Enable this function, LP399 will provide MAC ID Clone of PC through LAN Port. Provide options: Disable, Enable. Note: 1. MAC Clone function: Must use “Device Active” to Setup “Router” mode, then enable to get IP address automatically. 2. Connect PC to LAN port of LP399, After PC get the IP address and use LAN port login web page. Be able to Setup this function to configure. Save the Settings. 2.7.2.3. Special Considerations If MAC Clone want to retrieve LP399 originally MAC address, Please reset to default Setting (Restore Default Setting). 2.7.3. Virtual Server 2.7.3.1. Functions Virtual Server Provides 12 sets of Virtual Server information. 2.7.3.2. Instruction Item Index Active Protocol Internet Port Welltech Technology Co., Ltd. Explanation Show the number. Default: Not use. If you select it, the setup will be started. Default: TCP. Select the Protocol: TCP or UDP. Show the address of Internet Port. Setup the Internet Port address of Start and End. 50 / 89 2014/02/11 LAN Phone 399 User Manual Extranet Port Server IP Address Action Submit [Button] Delete All [Button] This column can only enter numbers; maximum length is 5 bytes with the range of 1~65533. If you want to Setup fixed Port, you should enter the same number for the two columns. If you want to Set up a period of Ports, the left column is Start Port and the right column is End Port. Show the address of Extranet Port. Setup the Extranet Port address of Start and End. This column can only enter numbers; maximum length is 5 bytes with the range of 1~65533. If you want to Setup fixed Port, you should enter the same number for the two columns. If you want to Setup a range of Ports, the left column is Start Port and the right column is End Port. Setup the Internal Server IP address. The type is xxx.xxx.xxx.xxx of 15 bytes. Provide [Delete] button to erase the data. Save the Settings. Reset all data. Note: 1. Internet & Extranet Port parameter, Please remember to avoid the local LP399 default port, Example: 5060, 9999, 20000, other ports can refer to documents. 2.7.3.3. Operate Instruction Step 1: In [Vitrual Server Setting] web page, Setup [Index: 1, Active :select, Protocol: TCP, Internet Port: 80~80, Extranet Port: 8080~8080, Server IP Address: 192.168.123.150; Index: 2, Active:select, Protocol: TCP, Internet Port: 600~600, Extranet Port: 600~600, Server IP Address: 192.168.123.15] (See Figure 1). (Figure 1) Step 2: Use other personal computer to Setup IP 192.168.123.150, Then connect LP399’s LAN port, Start personal computer Web Server function. Step 3: Link to [http://192.168.123.150:8080], Show [Web Function Testing] web page. Welltech Technology Co., Ltd. 51 / 89 2014/02/11 LAN Phone 399 User Manual 2.8. SIP Setting (Register Environment) Provide functions of [Service, Codec, Advanced, STUN]. 2.8.1. Service (SIP Register Setting) 2.8.1.1. Functions Provide 5 SIP register accounts to register 5 different SIP Server or IP-PBX. 2.8.1.2. Instruction Item Realm Realm Active Display Name Phone Number Authentication ID Authentication Password Domain Server Proxy Server Subscribe for MWI Welltech Technology Co., Ltd. Explanation Default: Realm 1. Provide options: 1~5. Realm is, in other words, SIP Server or IP-PBX Server. There 5 realm can be the same one. Default: Disable; When you Enable this function, LP399 will start to register the SIP Register Server or IP-PBX server. Provide options: Disable, Enable. Display name will be shown on LCD of your LP399. This column can enter numbers and strings (support: 0~9, a~z, @, _, -, *, #, ., +, :); maximum length is 31 bytes. Setup assigned Phone Number from SIP Register Server or IP-PBX server. This column can be numbers and strings (support: 0~9, a~z, @, _, -, *, #, ., +, :); maximum length is 31 bytes. Setup the SIP Register ID. This column can be numbers and strings(support: 0~9, a~z, @, _, -, *, #, ., +, :); maximum length is 47 bytes. Setup SIP Registration Password. This column can be numbers and strings; maximum length is 31 bytes. Setup Domain Server. This column can enter IP or Domain Name with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. If the Domain Server has Port Number, please add it at the end of Domain Name, for instance: nat.voiptalk.org:5065. Set up Proxy Server or IP-PBX Server. This column can enter IP or Domain Name with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. If the Domain Server has Port Number, please add it at the end of Domain Name, ex: nat.voiptalk.org:5065. Default: Disable. When Enable this function, system will send [Subscribe of MVI] 52 / 89 2014/02/11 LAN Phone 399 User Manual Explanation Item Submit [Button] 2.8.1.3. message. Please confirm this function supported by your SIP Register Server or IP-PBX server. Save the Settings. Operate Instruction Example 1: Register at port other than 5060 Step 1: In [Service Domain Setting] web page, Set up [Realm Active: Enable, Display Name: 22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test, Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for MWI: Disable] (See Figure 1). Since port 5060 is widely used in VoIP SIP port, hacker is easily to detect your device is an VoIP device (via port 5060) and invade your device to make expensive call. We strongly suggest not to use port 5060. Use another port to avoid this issue happening. In this example, We use SIP port 6000 instead. However, your registration SIP Server or IP-PBX Server should be able to acceport SIP port other than 5060. (Figure 1) Step 2: In [Service Domain Setting] web page (See Figure 2), the register status of that account is [System Status]. (Figure 2) Example 2: Enalbe Subscribe For MWI Step 1: In [Service Domain Setting] web page, Setup [Realm Active: Enable, Display Name: 22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test, Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for MWI: Enable ] (See Figure 3). Welltech Technology Co., Ltd. 53 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 3) 2.8.2. Codec (Voice Format) 2.8.2.1. Functions Codec Provide function to Setup priority of codec when call was established between two parties, RTP Package Length, and Codec ID Value. 2.8.2.2. Instruction Figure 1: Codecs Setting (Figure 1) Item Disabled Codecs >> << Welltech Technology Co., Ltd. Explanation Default: G.726.16, G.726.24, G.726.32, G.726.40, GSM. Disable these voice Codecs. >>: Move to Enable Codec area. <<: Move to Disable Codec area. 54 / 89 2014/02/11 LAN Phone 399 User Manual Item Enabled Codec Move Explanation Default: G.729, G.711 u-law, G.711 a-law, iLBC. Provide using Codec items. The priority is according to the order of the screen. The default Setting of the first priority is G.729. >>: Select [Disable Codecs] item, press [>>] button, can move to Enable Codec area. >>: Select [Enable Codecs] item, press [<<] button, can move to Disable Codec area. Up [Button] Select [Endble Codec] item, press [Up] button, can move up the codec priority. Down [Button] Select [Endble Codec] item, press [Down] button, can move down the codec priority. G.711 and G.729 Default: 20 ms; Set up the RTP Package Length of G.711 & G.729. Provide options: 10, 20, 30, 40, 50, 60, 70, 80, 90(ms). iLBC Default: 30 ms; Set up the RTP Package Length of iLBC. Provide options: 20, 30(ms). Silence Suppression (VAD) Default: Disable; Set up Silence Suppression (VAD). Provide options: Disable, Enable. When VAD detects that the users are in talking , Codec will send out messages to network. Theoretically, there is only one user talking and another one is listening in the same time, the listening one don’t send out any voice, so VAD will send the messages of the talking one to network, therefore, VAD can lower amount of message about 30%. Echo Canceller Default: Disable; Setup Echo Cancel. Provide options: Disable, Enable. Codec Type Setup the information of Codec ID. G726-16 Default: 23; When you Setup Custom, you can modify the Codec ID Value. This column can only be numbers; maximum length is 3 bytes with the range of 95~127. Provide options: Default, Custom. *: Please select Custom, before you modify Codec ID Value. G726-24 Default: 22; This column can only be numbers; maximum length is 3 bytes with the range of 95~127. Provide options: Default, Custom. G726-32 Default: 2; This column can only be numbers; maximum length is 3 bytes with the range of 95~127. Provide options: Default, Custom. G726-40 Default is 21; This column can only be numbers; maximum length is 3 bytes with the range of 95~127. Provide options: Default, Custom. RFC 2833 Default is 101; This column can only be numbers; maximum length is 3 bytes with the range of 95~127. Provide options: Default, Custom. Submit [Button] Save the Settings. Welltech Technology Co., Ltd. 55 / 89 2014/02/11 LAN Phone 399 User Manual 2.8.2.3. Operate Instruction Example 1: Adjust Codec Order Step 1: In [Code Setting] web page, Setup G.726 - 16 enable, move mouse on [Disabled Codecs: G.726 -16], then press [>>] button, can move to [Enabled Codecs] area, move mouse on this Codec, can use [Up] or [Down] button, adjust codec negotiation priority during call was established (See Figure 1). (Figure 1) Step 2: The other site makes a call to you, when you pick up the call, LP399 will use this codec as the first priority to talk. Example 2: Change Codec ID Step 1: In [Code Setting] web page, Setup [RFC2833, Custom: 100] (See Figure 2). (Figure 2) Note: If the other side sends you RFC-2833 not 100, LP399 will modify it to adjust the other side to communicate. 2.8.3. Advanced (Other Setting) 2.8.3.1. Functions Provide Setting [SIP Expire Time, SIP/RTP Port, QoS, SIP Register Retry Time, Use DNS SRV, DTMF, PRACK] and etc. Welltech Technology Co., Ltd. 56 / 89 2014/02/11 LAN Phone 399 User Manual 2.8.3.2. Instruction Item SIP Expire Time Explanation Default is 60; When this function is Set up to 0, the SIP Expire Time is according to the default value of Server. This column can only be numbers; maximum length is 5 bytes with the range of 60~86400 (seconds). SIP Expire Time Type Default: General. Provide options: General, 1/2, 2/3, 3/4, 4/5, 5/6, 6/7, 7/8, 8/9, 9/10. *This function must be supported by SIP Server or IP-PBX Server. The count formula of SIP Expire Time: General: SIP Expire Time-[(SIP Expire Time/30)*6] as SIP Expire Time > 60 seconds, if SIP Expire Time < 60 seconds, the SIP Expire Time subtract 5 seconds uniformly. 1/2: SIP Expire Time * 1/2. 2/3: SIP Expire Time * 2/3. 3/4: SIP Expire Time * 3/4. 4/5: SIP Expire Time * 4/5. 5/6: SIP Expire Time * 5/6. 6/7: SIP Expire Time * 6/7. 7/8: SIP Expire Time * 7/8. 8/9: SIP Expire Time * 8/9. 9/10: SIP Expire Time * 9/10. SIP Registration Retry Timer Default: 64 seconds. Set up the period of registering SIP Server again if LP399 fails to Welltech Technology Co., Ltd. 57 / 89 2014/02/11 LAN Phone 399 User Manual Item Explanation register SIP Server or IP-PBX server. This column can only enter numbers; maximum length is 4 bytes with the range of 5~3600 (seconds). SIP Session Timer T1 Default: 1000 ms; Set up round-trip time (RTP) estimate. This column can only enter numbers; maximum length is 4 bytes with the range of 500~2000. *This function must be supported by Server. SIP Session Timer T2 Default: 8000 ms. Set up the maximum retransmit interval for non-INVITE requests and INVITE responses. This column can only enter numbers; maximum length is 5 bytes with the range of 4000~16000. *This function must be supported by Server. SIP Session Timer B, F, H Default: 32000 ms. Set up the maximum retransmit interval for non-INVITE requests and INVITE responses. This column can only enter numbers; maximum length is 6 bytes with the range of 8000~128000. B: 64 * SIP T1; INVITE transaction timeout timer。 F: 64 * SIP T1; non-INVITE transaction timeout timer。 H: 64 * SIP T1, Wait time for ACK receipt. *This function must be supported by Server. For example, if T1 is 500 ms, T2 is 4 seconds and B,F,H is 32 seconds, then non-INVITE retransmissions occur at intervals of 500 ms, 1s, 2s, 4s, 4s, 4s, 4s, 4s, 4s, 4s. This means that retransmissions occur with an exponentially increasing interval that caps at T2. In this particular scenario, there are 10 retransmissions which is a total of 11 requests from UAC. SIP INVITE Timeout Default: 30000 ms; Set up SIP Invite, If how long do not respond, enter the failed state. This column can only enter numbers; maximum length is 5 bytes with the range of 8000~64000. Local SIP Port Default: 5060~5060. Set up the Start and End SIP Port Range of phone 1. This column can only enter numbers; maximum length is 5 bytes with the range of 1024~40000.。 If you want to Set up a fixed port, please Set up the same value of Start and End Port. If you want to Set up a range, the left column is Start Port, the right Port is End Port. Local RTP Port Default: 20000~21999. Set up the Start and End RTP Port Range of phone 1. This column can only enter numbers; maximum length is 5 bytes with the range of 1024~40000. If you want to Set up a fixed port, please Set up the same value of Start and End Port. If you want to Set up a range, the left column is Start Port, the right Welltech Technology Co., Ltd. 58 / 89 2014/02/11 LAN Phone 399 User Manual Item Explanation Port is End Port. Hold Type Default: RFC 2543 (0.0.0.0). Set up Hold (define by RFC). When this function is on, the information of [Connection Information (c): IN IP4 xxx.xxx.xxx.xxx] will change IP to the device of executing the function. Provide options: RFC2543 (0.0.0.0), Type1 (Send only), Type2 (inactvie). DTMF Type Default: RFC 2833. InBand: When you enter key information, the [Ethereal] will not show it. RFC2833: When you enter key information, the [Ethereal] will show [RTP Event]. SIP Info: When you enter key information, the [Ethereal] will show [Request: Info]. Provide options: InBand, RFC2833, SIP Info. RFC2833 + Inband: When you enter key information, LP399 sends Inband message and [RTP Event] message. SIP Info + Inband: When you enter key information, LP399 sends Inband message and [Request: Info] message. RPort Default: Disable; Set up RPort function. When this function is on, the [Rport] message will add in [Message Header]. Provide options: Disable, Enable. *This function must be supported by Server. Voice QoS (Diff-Serv) Default: 40; This column can only enter numbers; maximum length is 2 bytes with the range of 0~63. SIP QoS (Diff-Serv) Default: 40; This column can only enter numbers; maximum length is 2 bytes with the range of 0~63. Use DNS SRV Default: Disable. When this function is on, the package will show [DNS, Standard query SRV_sip_upd.xxx.xxx.xxx]. Provide options: Disable, Enable. *This function must be supported by Server. Keep-alive Message Default: Disable; When this function is on and system is in NAT, LP399 will send a package to Server periodically according to [Send Keep Alives Packet]. Provide options: Disable, Send UDP, Send SIP Option. Send UDP: Use UDP format to send; For example: UDP, Source Port: sip Destination Port: xxxx. Send SIP Optoin: Use SIP Option format to send; For example: SIP, Request-Line: OPTIONS sip:xxx.xxx.xxx.xxx;user=phone SIP/2.0. Keep-alive Interval Default: 60; This column can only enter numbers; maximum length is 3 bytes with the range of 15~250. Jitter Buffer Default: 1~64; Set up Jitter Buffer. In VoIP system, the time of every voice package arrives destination will affect by Network Delay. Therefore, Jitter Buffer is used in destination Welltech Technology Co., Ltd. 59 / 89 2014/02/11 LAN Phone 399 User Manual Item Explanation to modify the order of packages and adjust the time of Voice Playout Delay, this function will raise the voice quality. This column can only enter numbers; maximum length is 3 bytes with the range 0~32. SIP Server Type Default: General. Set up the type of SIP Server. In accordance with market available different SIP Servers or IP-PBX server, LP399 will adjust its configuration to be compatible with these SIP Server. Provide options: General, Asterisk, BroadWorks, Nortel, Xener, Vodtel, SKTelink. * Please make sure which model of SIP Server or IP-PBX server for LP399 IP Phone to work with in order to select suitable SIP Server Type. Use user=phone (Register) Default: Disable; When this function is on, the Register Header will add ”user=phone” message in Register packages. Provide options: Disable, Enable. *This function must be supported from SIP Server. Use user=phone (Invite) Default: Disable; When this function is on, the Invite Header will add ”user=phone” message in Invite packages. Provide options: Disable, Enable. *This function must be supported from SIP Server. Send SIP PRACK of Proxy Default: Disable; When this function is on, there will add “PRACK Header” messages. Provide options: Disable, Enable. *This function must be supported from SIP Server. Only Accept Trusted Certificates Default: Disable; Set up call from platform to accept only, don’t accept IP call. When enable, Receive calls from non-platform, then device does not respond. Provide drop-down options: Disable, Enable. Set up User Agent Content Default: (null); When send SIP packets, the packets header “User-Agent” message will join this word. This column can enter numbers and strings (support: 0~9, a~z, @, _, -, *, #, ., +, :, () [, ] and blank); maximum length is 46 bytes. Example: User-Agent: LP399 Submit [Button] Save the Settings. 2.8.3.3. Operate Instuction Example 1: SIP Expire Time SIP Expire Time: 60 Step 1: In [Service Domain Setting] web page, Set up [Realm Active: Enable, Display Name: 22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test, Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for MWI: Disable] (See Figure 1). Welltech Technology Co., Ltd. 60 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 1) Step 2: In [SIP – Advanced Setting] web page, Set up [SIP Expire Time: 60] (See Figure 2). (Figure 2) Step 3: When registering to Server successfully, LP399 will send a register package every 55 seconds. SIP Expire Time: 0 (by server) Step 1: In [Service Domain Setting] web page, Set up [Realm Active: Enable, Display Name: 22061, Phoner Number: 22061, Authentication ID: 22061, Authentication Password: test, Domain Server: 61.62.236.71:6000, Proxy Server: 61.62.236.71:6000, Subscribe for MWI: Disable] (See Figure 1). Step 2: In [SIP – Advanced Setting] web page, Set up [SIP Expire Time: 0 (the register time is defined by Server)] (See Figure 3). (Figure 3) Step 3: System will register to Server according to the period that defined by Server. Example 2: Use DNS SRV Use DNS SRV: Enable Step 1: Set up register SIP account Settings first, then use [Domain] to register SIP Server. (See Figure 4). (Figure 4) Step 2: In [SIP – Advanced Setting] web page, Set up [Use DNS SRV: Enable] (See Figure 5) Welltech Technology Co., Ltd. 61 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 5) Example 3: Keep Alives Message Keep Alives Message: Send UDP Step 1: Set up register SIP account settings (See Figure 6). (Figure 6) Step 2: In [SIP – Advanced Setting] web page, Set up [Keep Alives Message: Send UDP, Keep Alives Interval: 150] (See Figure 7). (Figure 7) Keep Alives Message: Send SIP Info Step 1: Set up register SIP account Settings (See Figure 6). Step 2: In [SIP – Advanced Setting] web page, Set up [Keep Alives Message: Send SIP Option, Keep Alives Interval: 150] (See Figure 8). (Figure 8) 2.8.4. STUN (STUN & Force Setting) 2.8.4.1. Functions STUN Provides function to set up STUN and Force feature. 2.8.4.2. Instruction Item Welltech Technology Co., Ltd. Explanation 62 / 89 2014/02/11 LAN Phone 399 User Manual STUN Active STUN Server Name STUN Port Force Active Public IP Address Public Port Submit [Button] Default: Disable; When this function is on, STUN functions Enable. Provide options: Disable, Enable. Default: stun.xten.com; This column can enter IP or Domain Name with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. Default: 3478; This column can only enter numbers; maximum length is 5 bytes with the range 80~65535. Default: Disable; When this function is on, the IP of [SIP infor] in [Ethereal] will replace by the assigned IP address. Provide options: Disable, Enable. Set up Router’s public IP address; This column can only enter IP with the format of xxx.xxx.xxx.xxx; maximum length is 63 bytes. Default: 5060; Set up Router’s public Port. This column can only enter numbers; maximum length is 5 bytes with the range of 80~65535. Save the settings. 2.8.4.3. Operate Instruction Example 1: STUN Step 1: Please Set up the SIP account first. Step 2: In [STUN Setting] web page, Set up [STUN Active: Enable, STUN Server Name: stun.xten.com, SUTN Port: 3478] (See Figure 1). (Figure 1) Example 2: Force The structure figure (See Figure 2): (Figure 2) Step 1: Please set up the SIP account first. Step 2: In [STUN Setting] web page, set up [Force Active: Enable, Public IP Address: 118.169.209.251, Public Port: 7777] (See Figure 3). (Figure 3) Welltech Technology Co., Ltd. 63 / 89 2014/02/11 LAN Phone 399 User Manual 2.9. Management (Advanced Settings) Provide [Status Log, Auto Provision, Auto Update, Firmware, Advanced, Passowrd, Tones, Default, Language]. 2.9.1. Status Log (System Status) 2.9.1.1. Functions Status Log Provide the running status of the system. 2.9.1.2. Instruction Item Phone Status Refresh [Button] Status Log Page Index Message Welltech Technology Co., Ltd. Explanation Show the Phone user status now; The status has: IDLE, Off-Hook. IDLE: Ready Off Hook: in use. Refresh the Phone status. System work status message. Default: 1 (Page 1), Select page. Provide drop-down options:1~xx; The page increases to next one in accordance with the amount of data to increase automatically. Show index number. Show the information of the system. Example: <2014-02-10 11:49> Get Time from SNTP server, Succeed! <2014-02-10 11:49>: Show the time of message. Get Time from SNTP server, Succeed! : Shows the content of message. 64 / 89 2014/02/11 LAN Phone 399 User Manual Item Export System Log [Button] 2.9.1.3. Explanation Save [Stauts Log] data to log file; System default file name is Syslog.log. Operate Instruction Example 1: Check Phone Status Step 1: In [Status Log] web page, When the phone don’t in use, [Phone Status] will show [IDLE] (See Figure 1). (Figure 1) Step 2: When pick up the handset, In [Status Log] web page, Press [Refresh] button, The [Phone Status] show [Off Hook] (See Figure 2). (Figure 2) Example 2: Check System Log Step 1: In [Status Log] web page, Select web page, the page will show other pages data. (See Figure 3). (Figure 3) Example 2: Save System Log File Step 1: In [Status Log] web page, press [Export System Log] button, Enter [Save File] menu, Then press [Save] button (See Figure 4). (Figure 4) Step 2: Save file completely, Any text editor can open [SysLog.log] file (See Figure 5). Welltech Technology Co., Ltd. 65 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 5) 2.9.2. Auto Provision (Configuration Automatically) 2.9.2.1. Functions Provide the types of HTTP, FTP and TFTP to update the configuration. 2.9.2.2. Instruction Item Provision Active 2 Steps Configuration Welltech Technology Co., Ltd. Explanation Default: Disable; When this function is on, LP399 will download the MACID.dat from the designated Server. Provide options: Disable, TFTP, FTP and HTTP. Default: Disable; Set up 2 Steps configuration, get the common settings first, then get the SIP accounts and passwords secondly. Provide options: Disable, Enable. *This function must be supported from SIP Server. 66 / 89 2014/02/11 LAN Phone 399 User Manual Item Server Auto Discovery Scheduling TFTP Server TFTP File Path HTTP Server HTTP File Path FTP Server FTP User Name FTP Password File File Path Next Configuration Time Submit [Button] 2.9.2.3. Explanation Default: Disable; DHCP TFTP Option 66 (TFTP): DHCP Server will offer the Option 66 Server IP address into the column of system [TFTP Server] when it assigns IP. Broadcasting: Discovering the Server by broadcasting, the Server will send the information of Type and Server to LP399, it will fill in these information to the corresponding columns. Provide options: Disable, DHCP TFTP Option 66 (TFTP), Broadcasting. *This function must be supported by Server. Default: Disable; Execute the Configuration regularly. When this function is on, system will check the Configuration Server by [Next Config Time]. Provide options: Disable, Enable. Note: The time parameter use [Auto Update Setting] web page’s [Scheduling Time & Date]. This column can only enter IP with the format of xxx.xxx.xxx.xxx; maximum length is 15 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, ex: 123/. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, ex: 123/. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, ex: 123/. System will check the Configuration Server when the Next config time is up. The start counting date is the next day, so the Next configuration time will add one day. Count rule: the next day + days + time period + MACaddress + random number = Next config time. Save the settings. Operate Instruction Example 1: Configuration by HTTP Step 1: Please complete MACID.dat first, and place it at the path of the designated Server. Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: HTTP, HTTP Server: 192.168.50.2, HTTP Path: /download/] (See Figure 1). (Figure 1) Welltech Technology Co., Ltd. 67 / 89 2014/02/11 LAN Phone 399 User Manual Step 3: In [Service Domain Setting] web page, Check [Realm: 1] Settings, Use [MACID.dat] file to load configuration (See Figure 2). (Figure 2) Example 2: Configuration by FTP Step 1: Please complete MACID.dat first, and place it at the path of the designated Server. Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: FTP, FTP Server: 192.168.50.2, FTP User Name: test, FTP Password: test, FTP File Path: download/] (See Figure 3). (Figure 3) Step 3: In [Service Domain Setting] web page, Check [Realm: 1] Settings, Use [MACID.dat] file to load configuration. Example 3: Set up 2 Steps configuration (not encryption) Step 1: Build a common MAC file with name [000000000000.dat], the file does not contain [$Service Domain Setting] data, (See Figure 4). Welltech Technology Co., Ltd. 68 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 4) Step 2. Set up the [$Service Domain Setting] data, and [line0Name=, ph1Realm1Active=1] cannot be deleted (See Figure 5). (Figure 5) Step 3: On [Auto Configuration Setting], Set up [Type: TFTP, 2 Steps Configuration: Enable, TFTP Server: 192.168.50.99] (See Figure 6). (Figure 6) Welltech Technology Co., Ltd. 69 / 89 2014/02/11 LAN Phone 399 User Manual Step 4: In [Service Domain Setting] web page, Check [Realm: 1] Settings, Use [MACID.dat] file to load configuration (See Figure 7). (Figure 7) Example 4: Server Auto Discover Broadcasting Step 1: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto Discover: Broadcasting] (See Figure 8). (Figure 8) Step 2: In [Auto Provision Setting] web page, Check [Provision Active: TFTP, TFTP Server: 192.168.55.91, TFTP File Path: config/] (See Figure 9). Note:If starts TFTP Server at the same time, this field parameter can’t see data. Because of this data upload provision function by TFTP Server. (Figure 9) Step 3: Enter [Service Domain Setting] web page, check [Realm No.: 1] Settings, Use [MACID.dat] file to load configuration. DHCP Option 66 (TFTP) (Please refer to DHCP Turbo and TFTP Turbo documents) Step 1: Install [DHCP Turbo + TFTPd32] software, then placed [MACID.dat] file into the specified directory. Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto Discover: DHCP Option 66 (TFTP)] (See Figure 10). Welltech Technology Co., Ltd. 70 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 10) Step 3: In [Auto Provision Setting] web page, Check [TFTP Server] field, upload this data (See Figure 11). Note:If start TFTP Server at the same time, This field parameter can’t see data, Because this data upload provision function by TFTP Server. (Figure 11) Step 6: Enter [Service Domain Setting] web page, Check [Realm: 1] Setting, Use [MACID.dat] file to load configuration. DHCP Option 66 (TFTP)-2 (Please refer to DHCP Turbo document) Step 1: Install [DHCP Turbo + TFTP Turbo] software, Then placed [MACID.dat] file into the specified directory. Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Server Auto Discover: DHCP Option 66 (TFTP)] (See Figure 12). (Figure 12) Step 3: In [Auto Provision Setting] web page, Check [TFTP Server] field, the field will upload this data (See Figure 13). Note:If start TFTP Server at the same time, This field parameter can’t see data, Because this data upload provision function by TFTP Server. (Figure 13) Welltech Technology Co., Ltd. 71 / 89 2014/02/11 LAN Phone 399 User Manual Step 4: In [TFTP Turbo Server] menu, can check [Download] status, The page can view and the device will come to download [MACID.dat] file (See Figure 14). (Figure 14) Example 5:Auto-Provision By Scheduling Step 1: In [Auto Update Setting] web page, Set up [Scheduling (Date): 14, Scheduling (Time): AM 00:00 -5:59 ] (See Figure 15). (Figure 15) Step 2: In [Auto Provision Setting] web page, Set up [Provision Active: TFTP, Scheduling: Enable, TFTP Server: 192.168.50.91] (See Figure 16). (Figure 16) Step 3: Return [Auto Update Setting] web page; In [Next Configuration Time] field, the field will show upgrade date and time at next time (See Figure 17). Welltech Technology Co., Ltd. 72 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 17) Note: How to establish MAC File data, Please refer『Auto_provision_1.ppt』file. 2.9.3. Auto Update (Firmware Auto Upgrade) 2.9.3.1. Functions Provide the types of TFTP, FTP, HTTP to update the firmware in ssh type. 2.9.3.2. Instruction Item Update Active TFTP Server TFTP File Path HTTP Server HTTP File Path FTP Server Welltech Technology Co., Ltd. Explanation Default: Disable; When this function is on, LP399 will update the firmware from the designate Auto provision Server. Provide options: Disable, TFTP, FTP and HTTP. This column can only enter IP with the format of xxx.xxx.xxx.xxx; maximum length is 15 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, for instance: 123/. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, ex: 123/. This column can enter IP or Domain Name; maximum length is 63 73 / 89 2014/02/11 LAN Phone 399 User Manual Item FTP User Name FTP Password File File Path Check new Firmware Type Scheduling (Date) Scheduling (Time) Automatic Update Type Firmware File Prefix Next Update Time Submit [Button] Explanation bytes. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter IP or Domain Name; maximum length is 63 bytes. This column can enter numbers or strings; maximum length is 63 bytes with the “/” in the end, ex: 123/. Default: Scheduling Only. Set up the type for checking new firmware. - Power on and Scheduling: Check the new firmware when powers on and base on Scheduling - Scheduling: According to [Next Update Time] to check the new firmware. Provide options: Power on and Schedule, Scheduling Only. * Power on and Scheduling: When LP399 discovers a new firmware which is different with current one, it will not update immediately. But you will hear a hint tone or see a [Found new s/w] message on LCD. You should update firmware by your decision. Default: 14 (day). This column can only enter numbers; maximum length is 2 bytes with a range of 1~30. Default: AM 00:00 – 05:59. Provide options: AM 00:00 – 05:59, AM 06:00 – 11:59, AM 12:00 – 17:59, AM 18:00 – 23:59. Default: Notify only. Set up the type to update firmware. Provide option: Notify only, Automatic. - Notify only: When LP399 discover a new firmware, it will not update firmware immediately. But you will hear a hint tone from LP399 or see a [Found new s/w] message on LCD display. - Automatic: Update firmware automatically. Default is production model. This is used to judge which model ask for update, such as Phone or ATA. This column can enter numbers or strings; maximum length is 8 bytes. LP399 will check the Update Server when the Next Update time is up. The start counting date is the next day, so the Next Update time will add one day. Count rule: the next day + days + time period + MACaddress + random number = Next Update time. Save the Settings. Note: Update By Youself Step 1: Display [Found new s/w] message on LCD display of LP399. Step 2: Press the [MENU] key to enter menu, select [6. Administrator 2. Upgrade System1. Upgrade Now 1. Yes], then LP399 will update firmware automatically. Special Note:When LP399 IP Phone starts to upgrade firmware, it takes several minutes to upgrade (about 2~3 minutes). In this duration, it can not dial any call feature. Don’t remove electric power in upgraded duration. Otherwise, the flash memory may be damaged permanatly and can not be recovered. 2.9.3.3. Operate Instruction Example 1: Build an Auto Update File [***_ver.dat] Welltech Technology Co., Ltd. 74 / 89 2014/02/11 LAN Phone 399 User Manual Step 1: The filename for checking firmware version, the filename is according to [Firmware File Prefix] on [Auto Update Setting] and adds [_ver.dat ] to be [filename_ver.dat], (See Figure 1). Ex:Firmware File Prefix: PHONE, the filename for checking firmware version is TA1S_ver.dat. Pay attention to [Firmware File Prefix], the name must be the same with ***_ver.dat. (Figure 1) Step 2: After build a [PHONE_ver.dat] file, there must have [CPU, CNAME] two data to compare with updating file in Server. If the Server one is newer than your existing one, then your LP399 will update firmware, (See Figure 2). (Figure 2) Note: CPU: The date of updating file, it can only enter numbers. CNAME: The updating filename, please enter a complete name without space or signs. Step 3: Please place ***_ver.dat and *.ssh files in the designated folder of the Server. Example 2: Check New Firmware Type Check New Firmware Type: Scheduling only (Upgrade Automatically) Step 1: In [Auto Update Setting] web page, Set up [Update Active: HTTP, HTTP Server: 192.168.50.2, HTTP File Path: /HFS/, Check New Firmware Type: Scheduling only, Scheduling (Date): 14, Scheduling (Time): AM 00:00-05:59, Automatic Update: Automatic, Firmware File Prefix: PHONEO] (See Figure 3). Welltech Technology Co., Ltd. 75 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 3) Step 2: In [Auto Update Setting] web page, Please check [Next Update time] (See Figure 4). (Figure 4) Step 3: When [Next Update Time] is arrived, LP399 will connect with HTTP Server to check the firmware version. Step 4: When LP399 downloads [PHONEO_ver.dat] file completely, it will compare the [CPU] information with current version. If the current version is older than server’s one, LP399 will check [CNAME] parameter and download [PHONEO_1019011.ssh] from the designated Server. Check New Firmware Type: Power on and Scheduling (Manually Upgrade) Step 1: Please build the file of checking firmware version [PHONEO_ver.dat] file and place it in the folder of designated Server with new *.ssh file. Step 2: In [Auto Update Setting] web page, Set up [Type: FTP, FTP Server: 192.168.50.2, FTP User Name: test, FTP Password: test, Check New Firmware Type: Power on and Scheduling, Scheduling (Date): 14,Scheduling (Time): AM 00:00-05:59, Automatic Update: Automatic, Firmware File Prefix: PHONEO] (See Figure 5). Welltech Technology Co., Ltd. 76 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 5) Step 3: In [Auto Update Setting] web page, check the next updating time of [Next Update time] (See Figure 5). Step 4: When LP399 downloads [phone_ver.dat] file completely, it will compare the [CPU] information with current version. If the current version is older than Server’s one, there will display a [Found New S/W] message on LCD from LP399 Phone. Step 5: If you want to perform upgrade firmware feature directly, Please press [MENU] key to enter settings menu, Select [6. Administrator 2. Upgrade System1. Upgrade Now 1. Yes] project and enforcement firmware upgrade. 2.9.4. Firmware (Firmware Upgrade) 2.9.4.1. Functions Provide type ssh to update. 2.9.4.2. Instruction Item Update Active Load From File Upgrade [Button] Explanation Default: CPU+DSP xxxx.ssh; Upgrade file format. The location of the updating file. Execute updating firmware. Note:It takes about 2~3 minutes when LP399 is updating firmware. Please do not turn off power adapter during updating firmware and you can not make any call either. 2.9.4.3. Operate Instruction Step 1: In [Firmware Upgrade] web page, please press [select] to choose the location of the updating file, (see Figure 1). Welltech Technology Co., Ltd. 77 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 1) Step 2: Enter the page of [select file], select the updating file (Example: voip.ssh), press [open] button and will go back to [Update Firmware], then press [Update] button, (See Figure 2). (Figure 2) Step 3: There will show a [Note], it tells you some messages that you should not do them during the updating firmware. When you are sure of these notes very clear, please press [OK] button to close the [Note]. Then LP399 will start to update firmware, (see Figure 3). (Figure 3) Step 4: There will show a page of [Note Information], it tells you the system is updating and it will reboot automatically as updating completely (See Figure 4). (Figure 4) 2.9.5. Advanced (Advanced Settings) 2.9.5.1. Functions Provide functions to set up Send Anonymous CID, Billing Signal, Send Flash Event, Encryption and Syslog. 2.9.5.2. Instruction Figure 1: LP399 Device Welltech Technology Co., Ltd. 78 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 1) Item ICMP Not Echo Anonymous Call Management from WAN WEB Login Port Telnet Login IP Dialing Format Send Flash event Transfer Key Mode Encrypt Type Welltech Technology Co., Ltd. Explanation Default: Disable; When this function was set up “Enable”, LP399 will not responseto the message of ping. Provide options: Disable, Enable. Default: Disable; When this function was set up Type 1/Type 2, LP399 will use the anonymous Caller ID. Provide options: Disable, Type 1 (anonymous@anonymous.invalid), Type 2 (anonymous@x.x.x.x) 。 *This function must be supported from SIP Server. Default: Enable; Allow users login system from WAN Port. When this function was set up Disable, users can only login LP399 from LAN Port. Provide options: Disable, Enable. Default: 9999; set up web login port location. This column can only enter numbers; maximum length is 5 bytes with a range of 1~65535. Default: Enable; Allows using Telnet to login system. If the setting is disable, User can’t use Telnet to login LP399. Provide drop-down options: Disable, Enable. Default: Type 1 (x@x.x.x.x); When this function was set up Disable, LP399 can not dial IP. Provide options: Disabled, Type 1 (x@x.x.x.x.), Type 2 (x.x.x.x). Default: Disable; Send the type of call waiting. When a user presses [Hook/Flash (Transfer)] on LP399, it will send out event messages depending on the type of user selected to the other side. Provide options: Disable, DTMF Event, SIP Info. Disable: Send out [SIP/DSP, Content-Type=applicatio-sdp]. DTMF Event: Send out [RTP event, Payload type=RTP event Flash]. SIP Info: Send out [SIP, Request: INFO sip:xxx@xxxx], [Message Body Signal=16, Duration=250]. Default: Attend Transfer; The settings have two method that can support server or other IP-phone for transfer action. Default: Disable; Set up SIP encrption type. When this function is on, system will send out encryption information according to encryption type. 79 / 89 2014/02/11 LAN Phone 399 User Manual Item Encrypt Key PPPoE Retry Period DHCP Gateway ARP Check Period Syslog Server IP Address System Log NET Bandwidth Limit Submit [Button] Explanation Provide options: Disable, Welltech, AVS, WALKERSUN1, WALKERSUN2, CSF1, CSF2, GX, VGX, RC4, VOS_R, VGCP. *This function must be supported by SIP Server. Set up encryption key. Some encryption type will ask you to enter the keys to encrypt the information. This column can enter numbers or strings; maximum length is 63 bytes. *This function must be supported by SIP Server. Default: 5; When LP399 failed to connect PPPoE, it will wait for several seconds and try to connect PPPoE again. This column can only enter numbers; maximum length is 3 bytes with a range of 5~255(seconds). Default: 0; When use DHCP mode to get IP address, How often to check default gateway there. This column can only enter numbers; If the parameter is 0, that mean disable this feature. Maximum length is 3 bytes with a range of 30~300(seconds). Set up Syslog address; The Syslog Server will receive Debug Log from LP399. This column can enter numbers or strings with the type of xxx.xxx.xxx.xxx; maximum length is 63 bytes. Default: Disable; Provide options: Disable, Call Statistics, General Debug, Call Statistics, General Debug, SIP Debug, Call Statistics + SIP Debug, General Debug + SIP Debug, All. Default: Disable; Set up the transmission limit through LAN Port. When this function is on, LP399 will limit the transmission through LAN Port according to the option. Provide options: Disable, 128, 256, 512, 1024, 2048, 4096, 8192(Kbps). Save the settings. 2.9.5.3. Operate Instruction Example 1: System Log (Please Start TFTP or System Log Server) System Log Type: All Step 1: In [Management - Advanced Setting] web page, Set up [System Log Server: 192.168.50,99, System Log Type: All] (See Figure 1). (Figure 1) Step 2: In [TFTP]’s [Syslog server] web page, this page show log message data (See Figure 2). Welltech Technology Co., Ltd. 80 / 89 2014/02/11 LAN Phone 399 User Manual (Figure 2) Note: User can use ethereal capture to check syslog data. Example 2: DHCP Gateway ARP Check Period Step 1: In [WAN Setting] web page, Set up [WAN Active: DHCP] (See Figure3). (Figure 3) Step 2: In [Management - Advanced Setting] web page, Set up [DHCP Gateway ARP Check Period: 30] (See Figure 4). (Figure 4) Welltech Technology Co., Ltd. 81 / 89 2014/02/11 LAN Phone 399 User Manual 2.9.6. Password (Change Login Account) 2.9.6.1. Functions Password Provides 3 Authority functions to change their User name and Password, respectively. 2.9.6.2. Instruction Figure 1: Admin (Figure 1) Item Admin New User Name New Password Confirmed Password System New User Name New Password Confirmed Password User New User Name Welltech Technology Co., Ltd. Explanation Administrator (the highest authority): it can only Set up an Administrator account. Default Username: admin, default password: admin Enter new user name, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, *, #, .); maximum length is 32 bytes. Enter new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Confirm new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. System (the middle authority): it can only Set up a System account. Default Username: system, default password: system Enter new user name, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, *, #, .); maximum length is 32 bytes. Enter new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Confirm new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Normal User (the lowest authority): it can only Set up a Normal User account. Default Username: user, default password: user Enter new user name, This column can enter numbers or strings 82 / 89 2014/02/11 LAN Phone 399 User Manual Item New Password Confirmed Password Submit [Button] Explanation (support: 0~9, a~z, @, _, -, *, #, .); maximum length is 32 bytes. Enter new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Confirm new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Save the Settings. Figure 2: System (Figure 2) Item System New User Name New Password Confirmed Password User New User Name New Password Confirmed Password Submit [Button] Explanation System (the middle authority): it can only Set up a System account. Default Username: system, default password: system Enter new user name, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, *, #, .); maximum length is 32 bytes. Enter new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Confirm new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Normal User (the lowest authority): it can only Set up a Normal User account. Default Username: user, default password: user Enter new user name, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, *, #, .); maximum length is 32 bytes. Enter new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Confirm new user password, This column can enter numbers or strings (support: 0~9, a~z, @, _, -, ., +, :, [, ], *, #, !, %); maximum length is 32 bytes. Save the Settings. 2.9.7. Tones (Audio Frequency Set up) 2.9.7.1. Functions Tones Provide functions to set up Dial, Ring Back, Busy, Congestion, Ring, Call Waiting Tone, Dual Tone, Multi-Frequency. Welltech Technology Co., Ltd. 83 / 89 2014/02/11 LAN Phone 399 User Manual 2.9.7.2. Instruction Item Dial Tone Cadence On Hi-Tone Freq Lo-Tone Freq Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Ring Back Cadence On Hi-Tone Freq Lo-Tone Freq Welltech Technology Co., Ltd. Explanation Set up the Dial Tone Settings. Default: Disable; When check the box, Cadence On will Enable. Default: 440; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. This is high frequency tone. Default: 350; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. This is low frequency tone. Default: 4522; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535.。 Default: 0; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms).。 Default: 0; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the second category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the second category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms).。 Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Set up the Ring Back Tone Settings Default: Enable; When check the box, Cadence On will Enable. Default: 480; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 440; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. 84 / 89 2014/02/11 LAN Phone 399 User Manual Item Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Busy Cadence On Hi-Tone Freq Lo-Tone Freq Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Congestion Cadence On Hi-Tone Freq Lo-Tone Freq Welltech Technology Co., Ltd. Explanation Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 200; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 400; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the second category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the second category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~999 (10ms). Set up the Busy Tone Settings Default: Enable; When check the box, Cadence On will Enable. Default: 620; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 480; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535.。 Default: 50; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 50; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the second category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the second category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms).。 Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Set up the Congestion Tone Settings. Default: Enable; When check the box, Cadence On will Enable. Default: 620; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 480; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. 85 / 89 2014/02/11 LAN Phone 399 User Manual Item Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Ring Cadence On Hi-Tone Freq Lo-Tone Freq Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Call Waiting Cadence On Hi-Tone Freq Lo-Tone Freq Welltech Technology Co., Ltd. Explanation Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 30; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 20; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the secondsond category of time start. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the second category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Set up the Ring Tone Settings. Default: Enable; When check the box, Cadence On will Enable. Default: 480; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 440; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 15360; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 15360; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535.。 Default: 200; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 400; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the second category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the secondsond category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Set up the Call Waiting Tone Settings. Default: Enable; When check the box, Cadence On will Enable. Default: 440; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. Default: 350; This column can only enter numbers; maximum length is 4 bytes with a range of 0~4096. 86 / 89 2014/02/11 LAN Phone 399 User Manual Item Hi-Tone Gain Lo-Tone Gain On Time 1 Off Time 1 On Time 2 Off Time 2 On Time 3 Off Time 3 Submit [Button] Explanation Default: 2261; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 1130; This column can only enter numbers; maximum length is 5 bytes with a range of 0~65535. Default: 30; Set up the first category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 20; Set up the first category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 30; Set up the secondsond category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 400; Set up the secondsond category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of ON time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Default: 0; Set up the third category of OFF time. This column can only enter numbers; maximum length is 3 bytes with a range of 0~ 999 (10ms). Save the Settings. 2.9.8. Default (Reset to Default) 2.9.8.1. Functions Default Provides the way of eliminating all Settings and reloading the default Settings except the data of Phone Book. 2.9.8.2. Instruction Item Reset [Button] Export [Button] Restore [Button] Explanation Clear all Setting and reset to default, Then reboot system automatically. [Export] button, Provide device configuration back up. Default file name is config.db. Provide restore feature, Import file format is .db. Note: If user use [Update.htm] web page’s [Restore Configuration] to upload [config.db] file, it can’t clear configuration from this feature. 2.9.8.3. Operate Instruction Example 1: Export System Configuration Step 1: Please finish the Web parameter Set up, Then reboot LP399. Step 2: In [Reset to Default] web page, Press [Export System Configuration]’s [Export] button Welltech Technology Co., Ltd. 87 / 89 2014/02/11 LAN Phone 399 User Manual (See Figure 1). (Figure 1) Step 3: Enter [Save File] menu, Default file name is config.db, press [Save] button, Save the system parameter to .db file (See Figure 2). (Figure 2) Example 2: Restore Setting Step 1: In [Reset to Default] web page, Press [Browse] button. After choosing the configuration file, Press [Open] button. Return [Reset to Default] web page, make sure to perform the update, Press [Restore] button (See Figure 3). (Figure 3) Step 2: Restore complete, Must save setting and reboot system (See Figure 4), Reboot system can take effect the [config.db] parameter. (Figure 4) 2.9.9. Language 2.9.9.1. Functions Provide LP399 web page’s language, When press [Submit] button, Please wait a few seconds (About 5~10 seconds). LP399 will show your desire language automatically. 2.9.9.2. Instruction Item Web Language Submit [Button] Welltech Technology Co., Ltd. Explanation Default: English. Set up web page language, change any language must wait for a while. Provide drup-down options: English, Chinese, Simplified Chinese, Portuguese. Save the Settings. 88 / 89 2014/02/11 LAN Phone 399 User Manual 2.10. Save & Reboot Save & Reboot Provide functions to save all Settings and restart LP399 IP Phone. 2.10.1. Functions Save Change: Save all Settings and restart LP399. Reboot System: Restart the system. 2.10.2. Instruction Item Save [Button] Reboot [Button] Explanation Save all Settings and restart device. Restart device. 2.11. Logout (Logout System) 2.11.1. Functions Provide to logout LP399 webpage Settings menu; Return web page login. 2.11.2. Instruction Item Logout [Button] Explanation Logout system Settings menu; Return web page login. --- The End --- Welltech Technology Co., Ltd. 89 / 89 2014/02/11
© Copyright 2025