1. art and entertainment
2. shows and events
3. exhibition

EXHIBITOR MANUAL
T E C H N I C A L
S E R V I C E S
18th International professional building exhibition
KyivBuild 2014
15th International exhibition for Hardware, Tools and DIY
Intertool 2014
4 March 2014 - 6 March 2014
Ukraine, Kiev, Brovarskoy prospect, 15
Contact information
Premier Expo
Tel: +38(044) 496-86-45
Fax: +38(044) 496-86-46
www.pe.com.ua
EQUIPPED AREA / SPACE ONLY SITE:
Mr. Dmitriy Tyagniryadno
Tel: +38(044) 496-86-45 (ext. 252)
E-mail: Tyagniryadno@pe.com.ua
CUSTOM BUILD STANDS:
Ms. Yulia Artemenko
Tel: +38(044) 496-86-45 (ext. 304)
E-mail: Y.Artemenko@pe.com.ua
Mr. Konstantin Kalmyk
Tel: +38(044) 496-86-45 (ext. 222)
E-mail: K.Kalmyk@pe.com.ua
CONTENTS
CONTENTS
2
DATES & DEADLINES
4
Exhibition timetable
4
Deadlines On-Site
4
THE VENUE
5
Address
5
Ceiling heights
5
Floor loading
5
Access
5
Working hours
5
Restaurants / cafes
5
Smoking
5
First Aid
5
YOUR STAND
6
Your stand
6
Equipped, shell scheme
6
Electricity for equipped, shell scheme
6
Custom design & custom build stands
7
Accreditation
7
Space only sites
7
Electricity for space only sites
7
Fire certificates
8
Double-decker stands
8
Location
8
Exhibits
8
Health & Safety
8
Insurance
8
Protective helmets
8
Fire Extinguishers
9
Machines / Machinery in pavilions
9
Noise Levels
9
Varnishing, Painting and sawing works
9
Aisle width during build-up and dismantling
LOCATION OF INTERNATIONAL EXHIBITION
CENTRE
Location of IEC
Car parks, Entry gates
14
14
15
APPENDIX - 1. TECHNICAL FORMS
16
FORM - 1
16
Temporary personnel
16
Daily stand cleaning
16
Car parking passes
16
FORM - 2
17
Electricity – equipped / shell scheme
stands
17
Electricity – space only sites
17
Water-supply tank filling / drainage
17
Water connection
17
Telephone, Fax, Internet
17
FORM - 3 (equipped / shell scheme stands only)
Fascia panel name
Logo on a fascia panel
Logo / graphic works
FORM - 4
Stand construction
Graphic works
Furniture
Kitchen utensils
Audio, video, multimedia equipment
Electrical equipment, lighting
PROFORMA-INVOICE
APPENDIX - 2. FIGURES OF EQUIPMENT
APPENDIX - 3. STAND SCHEME
APPENDIX - 4. BASIC SHELL SCHEME
APPENDIX - 6. SUSPENSION
9
18
18
18
18
19
19
19
20
21
21
21
22
23
27
28
30
Storage facilities
9
Banners, Flags, Balloons, ceiling suspensions
9
GENERAL & ADDITIONAL SERVICES
10
Cleaning and Refuse
10
Security
10
Temporary Personnel
10
Car Parking Passes
10
Water and Drainage
11
Telephones / Internet
11
Fascia Names and Graphic Works
11
Furniture, Kitchen Equipment, Electrical
Appliances and Fittings
11
Order Forms ProForma Invoice
11
Payment
11
Late orders. Orders during the build-up 11
Quality of Service
11
FREIGHT, HANDLING, CUSTOMS
12
Freight Forwarding & Handling On-Site 12
Shipping Deadlines
12
Customs Clearance
12
BTG EXPO OFFICE IN YOUR COUNTRY
13
Kyiv Build & Intertool 2014
2
4 March 2014 - 6 March 2014
Dear Exhibitors!
We are happy that you have decided to participate in our show. The technical division of
Premier Expo will work hard to ensure you have a successful show. Please do not hesitate to
contact us if you have a query about anything in this manual.
Please note that some of the Forms attached to this manual are obligatory: Form 3 and the
Pro-forma Invoice for equipped space, and, for space only sites, Form 2 and the Pro-forma
Invoice.
Exhibitors who build their stands with the help of other stand builders or on their own must also
provide a drawing of the stand (2D and 3D) and an electrical plan with an indication of kW for
each electricity-consuming item. This documentation must be sent no later than 1 month before
the show.
The rest of the forms only need to be completed if such services are required.
If you need to cancel an order (no later than 1 month before the set-up), you must send an
official letter, signed and stamped. If we do not receive this letter, the order will still be valid and
invoices must be paid.
Please adhere to the deadlines. Late orders are subject to a surcharge, as stated in the
manual.
We wish you all the best and look forward to seeing you at the show.
Kindest regards,
Technical Division.
Dmitriy Tyagniryadno
Kyiv Build & Intertool 2014
Yulia Artemenko
Alexey Batmanov
3
Konstantin Kalmyk
4 March 2014 - 6 March 2014
DATES & DEADLINES
ATTENTION!
Forms, Proforma-invoice, and Stand layouts for space only sites must be sent to Premier Expo
by 7 February 2014
EXHIBITION TIMETABLE
day of week
date
time
Saturday
1 March 2014
13:00 - 22:00
9:00 - 22:00
Sunday
2 March 2014
16:00
9:00 - 22:00
Monday
3 March 2014
18:00
action
Access for Set-up: space only sites inside
pavilions
Access for Set-up: space only sites inside
pavilions
Deadline for Set-up to start: space only sites
inside pavilions
Access for Set-up: space only sites inside
pavilions, equipped space inside pavilions, space
outside pavilions
All stands are to be ready for inspection
Tuesday
4 March 2014
11:00
10:00 - 18:00
Official Opening
Exhibition Hours
Wednesday
5 March 2014
10:00 - 18:00
Exhibition Hours
Thursday
6 March 2014
10:00 - 17:00
17:00
17:00 - 22:00
Exhibition Hours
End of the show
Dismantling of stands, removal of equipment
Friday
7 March 2014
9:00 - 22:00
22:00
Dismantling of stands, removal of equipment
Pavilion must be vacated
Orders received between 8 February 2014 and 28 February 2014 are subject to a 50% surcharge.
Orders received during the build-up or during the show between 1 March 2014 and 6 March 2014 are subject
to a 100% surcharge.
Please note that if orders are late, equipment may not be available.
DEADLINES ON-SITE
All stands must be ready for inspection by 18:00, on the last day of the build-up. Therefore, it is essential that
you are present on your stand on the morning of the last day of build-up at the latest to ensure that your stand is
completely equipped and decorated by that time.
Any boxes/cartons which have not been unpacked by 17:00 on the last day of build-up may be removed from your
stand at your expense and can only be re-delivered to your stand after the official opening and the VIP tour.
The exhibition will be closed at 17:00 on the last day so that the forwarding agent can begin with the delivery of
empty packages.
IT IS STRICTLY FORBIDDEN TO PACK THE EXHIBITS BEFORE THE OFFICIAL END OF
THE SHOW – 6 MARCH 2014, 17:00!
Kyiv Build & Intertool 2014
4
4 March 2014 - 6 March 2014
THE VENUE
ADDRESS
International Exhibition Centre
Brovarskiy prospect 15
Kiev, Ukraine
The location of the International Exhibition Centre is on page 14.
CEILING HEIGHTS
Pavilion 1:
Max. 12,7 m
Min. 7,5 m
Pavilion 2:
Max. 24 m
Min. 16,5 m
Pavilion 3:
Max. 20 m
Min. 7,5 m
If you are unsure which height applies to your location, please contact Premier Expo Technical Division.
NB: Stand height restrictions apply. Please refer to Your Stand - Space Only Sites.
FLOOR LOADING
Pavilion 1:
The maximum permitted load is
1000 kg/m2
Pavilion 2:
The maximum permitted load is
3000 kg/m2
Pavilion 3:
The maximum permitted load is
3000 kg/m2
Point loading is not allowed; stress must always be distributed.
If the load of your stand exceeds the maximum permitted load, please contact Premier Expo Technical Division.
ACCESS
Exhibitor: Exhibitor Badges allow exhibitors and their personnel to access the exhibition hall. For details, please
refer to the Marketing Manual.
Badges can be collected on-site at the registration desk.
Contractors: Personnel involved in the build-up and dismantling of your stand will only be allowed to access by
security if they hold a work passes (orange badges), which you can collect from the Premier Expo reception on-site.
These passes are free of charge.
WORKING HOURS
The normal working hours during build-up and dismantling are 9:00 till 22:00 each day. Please refer to dates and
deadlines, page 4.
RESTAURANTS / CAFES
There are bars and cafes at the International Exhibition Centre.
SMOKING
PLEASE NOTE!
The International Exhibition Centre is a no-smoking area. Smoking is only allowed in closed offices and in
specially designated places next to the toilets.
FIRST AID
You can make use of the medical room’s services. It is located in the room №103 near the entrance from the
metro Levoberezhnaya side, in the International Exhibition Centre pavilion 1 room 103 and pavilion 3.
In case of a medical emergency, dial:
Ambulance:
103;
Boris:
+38(044) 238-00-00;
Medicom:
+38(044) 432-88-88
Kyiv Build & Intertool 2014
5
4 March 2014 - 6 March 2014
YOUR STAND
YOUR STAND
If you have any inquiries about EQUIPPED AREA / SHELL SCHEME / SPACE ONLY SITES
(additional equipment and services, equipment dimensions, accreditation procedure, show deadlines etc.) please
contact:
Mr. Dmitriy Tyagniryadno
Tel. +38(044) 496 86 45 (ext. 252),
Fax +38(044) 496 86 46,
e-mail: Tyagniryadno@pe.com.ua
If you have any inquiries about CUSTOM BUILD STANDS
please contact:
Ms. Yulia Artemenko
Tel. +38(044) 496 86 45 (ext. 304),
Fax +38(044) 496 86 46,
e-mail: Y.Artemenko@pe.com.ua
Mr. Kostiantyn Kalmyk
Tel. +38(044) 496 86 45 (ext. 222),
Fax +38(044) 496 86 46,
e-mail: K.Kalmyk@pe.com.ua
EQUIPPED, SHELL SCHEME
Built by Premier Expo
Stands will be built using Octanorm or other systems using of aluminium poles and beams and plastic panels. The
standard size of the wall panels is ~ 100 x 250 cm with a face size of ~ 95 x 238 cm. If you require exact information
about the panels used on your stand, please contact Premier Expo Technical Division.
No additional stand fittings or displays may be attached to the stand shell structure. Wall panels and other
stand material must be returned after the exhibition without any damage caused by nailing, drilling, wallpapering,
inappropriate self-adhesive tape, etc., so please ensure that you have enough chain, hooks, etc., to hang posters and
other displays. The cost of repair or replacement of damaged equipment will be charged to the exhibitor.
Please refer to your space application form to see which equipment is already included in your package. No
financial credit can be given for items included in these packages but not utilised. Additional equipment can be
ordered; please refer to Appendix - 1. Technical forms, Form 4 (page 19). You can find the outlines of additional
equipment in Appendix - 2. Pictures of additional equipment, on page 23.
In order to stabilise the structure, it might be necessary to include additional supporting poles and beams or wall
panels, which are not necessarily shown on our stand layouts.
Should you need to remove these supports temporarily due to the delivery of large exhibits to your stand, you
must have the permission of the stand constructor and must make sure that all possible safety measures are taken.
Please pay attention that your stand has common walls with other companies and thus its partition order may be
different from one indicated in the stand layout.
ELECTRICITY FOR EQUIPPED, SHELL SCHEME
Electrical supply and consumption are included in equipped space (please refer to Appendix - 4. Basic shell
scheme). You may order additional electrical plug sockets on Form 4.3 (page 21) or order an electrical main
supply connection of Form 2 (page 17) (please refer to Appendix - 1. Technical Forms). Please choose the correct
consumption you need on this form.
Electricity will be supplied for the exhibition. During build-up and dismantling, exhibitors or their contractors
should use battery-powered tools or bring an extension cable drum to reach one of the few on-site plug sockets.
Kyiv Build & Intertool 2014
6
4 March 2014 - 6 March 2014
YOUR STAND
CUSTOM DESIGN & CUSTOM BUILD STANDS
If you are interested in a stand built according to your individual specifications, please provide us with detailed
drawings of your design. We will then send you our proposal for your consideration. Please contact:
+38(044) 496-86-45 (ext. 304). Contact person: Yulia Artemenko, e-mail: Y.Artemenko@pe.com.ua
+38(044) 496-86-45 (ext. 222). Contact person: Kostiantyn Kalmyk, e-mail: K.Kalmyk@pe.com.ua
ACCREDITATION
IMPORTANT: Exhibitors that have ordered a space-only site, or are having their stand built independently,
must obtain accreditation before 31 January 2014 in the International Exhibition Centre in order to receive
permission to carry out the work. In the event that the exhibitor does not obtain permission, the Organiser is
entitled to prohibit the construction of the stand.
For accreditation, please contact the International Exhibition Centre on +38 044 206-87-91, 201-11-35
Contact person: Elena Bondarenko, e-mail: bondarenko@iec-expo.com.ua
SPACE ONLY SITES
Indoor and Outdoor
You must send the name of your stand builder incl. contact details to Premier Expo as soon as you receive this
information. Please send this information to Dmitriy Tyagniryadno by fax +38(044) 496-86-46.
A floor covering (e.g., carpet) and rear and side walls of a minimum height of 2.5 m must be provided by the
exhibitor or his stand builder. Construction may exceed a height of 2.5 m, but only with permission in writing from
Premier Expo, prior to the exhibition. The reverse side of your wall/s must be of neat appearance if it overlaps the
height of those on neighbouring stands (2.5 m shell scheme). It is not permitted to display any company logos and/
or lettering on or near the borders of the stand and face neighbouring stands. The outer surface (wall panels 2.5 m
height) must be decorated if visible from the aisles. The sides of your stand which are open in accordance with the
general plan of the exhibition cannot be built up with solid walls without prior approval from Premier Expo’s Technical
Department. No part of the stand structure may extend beyond the boundaries of the site allocated. In the event of
failure to comply with these conditions, Premier Expo reserves the right to suspend the construction of your stand.
Technical stand layouts indicating all measurements including heights must be presented to Premier Expo for
approval at least one month before build-up unless another date is advised. The position of entry points for ordered
electricity, water, telephone connections, etc., must also be clearly marked on the stand layouts. Please also follow
the information about ceiling heights under The Venue page 5.
IMPORTANT!
Before erecting your stand or positioning your outdoor exhibits, the Premier Expo on-site office must be contacted
to ensure that the correct space is being occupied. The final plan of the show will be available from the Management
office on site. If a stand is built in the wrong space and Premier Expo has not been contacted beforehand, you will be
forced to dismantle your stand at your own expense and build it again in the correct space.
Construction may exceed a height of 250 cm, but only with permission in writing from ITE in London, on receipt
of the proposed stand design, prior to the exhibition. The reverse side of your wall/s must be of neat, plain white,
appearance if it overlaps the height of those on neighbouring stands. It is not permitted to display any company logos
and/or lettering on or near the borders of the stand and face neighbouring stands.
Premier Expo does not provide fascia panels for space only sites. The exhibitors and/or their stand constructors
must ensure that the stand prominently displays the name of the exhibitor as well as the stand number.
Exhibitors or their stand builders have to completely remove from the floor any double-sided sticky tape that
has been used for the carpeting. The cost of repair or replacement of damaged pavilion facilities / equipment will be
charged to the exhibitor.
ELECTRICITY FOR SPACE ONLY SITES
Electrical supply and consumption are not included in space only sites. You may order an electrical main
supply connection of Form 2 (page 17) (please refer to Appendix - 1. Technical Forms). Please choose the correct
consumption you need on this form. Exhibitors with space only sites need to order a fuse switchbox and cabling to
the main supplies if they are not providing their own.
Electricity will be supplied for the exhibition. During build-up and dismantling, exhibitors or their contractors
should use battery-powered tools or bring an extension cable drum to reach one of the few on-site plug sockets.
Kyiv Build & Intertool 2014
7
4 March 2014 - 6 March 2014
YOUR STAND
FIRE CERTIFICATES
Fire Certificates issued by the producer/s of all stand materials used confirming that these materials are nonflammable or fire resistant/flameproof must be available on-site for presentation upon request in English along with
a translation into the local language. You must also be in possession of a certificate confirming that all your wooden
materials have been soaked.
DOUBLE-DECKER STANDS
There is a surcharge on the space occupied by double-decker stand constructions. If this has not been booked
already through the space application form, it must be paid in full before the start of the exhibition. Please refer to
Appendix - 1. Technical forms. PROFORMA-INVOICE - page 22.
Double-decker stands must be fitted with a sprinkler system and with fire extinguishers. In addition, they must
display the static certificate of the construction, which the exhibitor or his stand builder must also present to the local
exhibition management at least one month before the exhibition.
LOCATION
Columns, pillars, fire points and/or utility connection points may not always be conveniently located with regards
to the stands allocated. This may result in longer lengths of cables and pipes being visible, possibly across your
stand.
EXHIBITS
Please note that the maximum weight of your exhibits must not exceed the maximum load allowed in the pavilions.
Please refer to page 5 (Floor loading).
HEALTH & SAFETY
Exhibitors and their stand contractors have a duty of care to other exhibitors, visitors and public at large in so far
as health & safety issues.
Exhibitors and stand contractors should have a valid policy with a reputable insurance company to a minimum
limit of $3,000,000 in respect of their liability for injury to third parties or damage to third party property.
INSURANCE
The Organisers have valid employers’ & public liability insurance in respect of their liability to their employees
for death or injury and in respect of injury to third parties or damage to third party property.
Included under the Organisers’ insurance arrangement is the provision of contingent public liability cover with a
limit of £2,500,000 for any one occurrence, and contingent products liability cover with a limit of £2,500,000 for any
one occurrence and for all occurrences for the duration of the insurance.
The contingent public/products liability operates as cover for the Organiser over and above your existing public/
products liability insurance in the event of any shortfall in indemnity limit or if your policy fails to operate.
Evidence of your public/products liability insurance may be requested.
In the event of an incident which may give rise to a claim, you should immediately contact the Organisers’
representative on site to report the matter, who will provide you with the relevant documentation for you to complete.
You must co-operate with the Organiser in any such claim and provide any information that it may request.
Exhibitors are responsible for arranging any other insurance, such as cover for loss of expenses
caused by cancellation/abandonment and loss of or damage to exhibits and other items.
PROTECTIVE HELMETS
IMPORTANT!
By the rules of the International Exhibition Centre according to the world security practice any mounting/
dismounting works must be performed with protective helmets on. Make sure you (in case of self-building) or your
building company comply with this rules.
Kyiv Build & Intertool 2014
8
4 March 2014 - 6 March 2014
YOUR STAND
FIRE EXTINGUISHERS
Any exhibitors who require special extinguishers or fire-fighting equipment, owing to the nature of their exhibits,
should make their own arrangements to provide such items. Any exhibitors particularly concerned about the
flammable nature of their exhibits are strongly advised to bring their own fire extinguishers.
MACHINES / MACHINERY IN PAVILIONS
If you are exhibiting machines / machinery or any fuel-operated equipment, please make sure its fuel level at the
time of arrival in the pavilion is minimum and does not exceed 5% of the tank’s capacity (in any case, not more than
10 litres). It is compulsory to have means of extinguishing fires if exhibiting such equipment.
NOISE LEVELS
If noise levels from exhibitors’ promotional videos and displays exceed 75 decibels, please be advised that
Premier Expo reserves the right to close down the noise source after a verbal warning.
VARNISHING, PAINTING AND SAWING WORKS
IMPORTANT!
Please be aware that any varnishing, painting or sawing works or any other work that may result in dust within
the exhibition centre ARE STRICTLY FORBIDDEN!
AISLE WIDTH DURING BUILD-UP AND DISMANTLING
IMPORTANT!
Please be aware that it is strictly forbidden to pile up goods and equipment in the aisles between stands.
You may leave your equipment or exhibits within your stand area only or as close to its boundaries as possible.
The minimum width of the aisles between stands according to fire-fighting regulations is 2 m. In order to avoid
penalties please maintain the aisle width stated above.
STORAGE FACILITIES
Please note that Premier Expo does not provide any storage facilities for packing materials or exhibits. Each
exhibitor is responsible for removing packaging materials or providing storage on their stand. If necessary, storage
facilities could be provided by the International Exhibition Centre. If this is required, please contact IEC directly on:
+38(044) 201-11-47.
BANNERS, FLAGS, BALLOONS, CEILING SUSPENSIONS
No suspension may be made from the ceiling of the exhibition hall or to the floor, walls or any other part of the
building without the prior approval of the Premier Expo Management. Please refer to the Appendix-6 (suspension)
Form.
Kyiv Build & Intertool 2014
9
4 March 2014 - 6 March 2014
GENERAL & ADDITIONAL SERVICES
CLEANING AND REFUSE
General cleaning of the aisles will be carried out every morning prior to opening as well as the removal of small
amounts of refuse, provided that they are placed in plastic bags or cartons in front of the stand in the evening.
To have individual daily cleaning for your stand, please place an order using Form 1 (page 16).
Exhibitors are advised that their stand areas should be completely cleared before they leave. Exhibitors will be
charged for the removal of any refuse left behind.
SECURITY
Security in the venue is maintained by the Security guard.
The pavilions will be locked at 22:00 and during the exhibition usually no later than 18:30. Overnight security will
be maintained by guards for the duration of the exhibition. The doors will be unlocked at 9:00 each day. It is the sole
responsibility of the exhibitor to ensure that all exhibits and stand equipment is properly manned when the doors are
opened.
The Security for the exhibition area is provided within in the following timetable:
- during the daytime:
- from the 4 March 2014 till 5 March 2014 from 9:00 till 18:30 Exhibitors are responsible for ensuring that
their exhibits and stand equipment is manned; the onsite Security guards will ensure that the general
public will be protected and will also be responsible for the entry and exit points of the venue.
- from the 6 March 2014 from 9:00 till 22:00 Exhibitors are responsible for ensuring that their exhibits
and stand equipment is manned; the onsite Security guards will ensure that the general public will be
protected and will also be responsible for the entry and exit points of the venue.
- overnight:
- during the set-up which takes place from 1 March 2014 till 3 March 2014 between the hours of 22:00
of the current day and 9:00 of the next day the Security will not allow any unauthorised persons
admittance into the exhibition area;
- during the show from 4 March 2014 till 5 March 2014 from 18:30 of the current day till 9:00 of the next
day the Security will not allow any unauthorised persons admittance into the exhibition area and will
ensure that all exhibition stands are safely guarded;
- during the dismantling 6 March 2014 from 22:00 of current day till 9:00 of next day the Security will not
allow any unauthorised persons admittance into the exhibition area.
For individual security for your stand during the opening hours and/or overnight, please place an order using
Form 1 (page 16).
The removal of exhibits or equipment that is under the organisers guard is only possible if the item list has been
signed in writing by the Organisers. The approval forms to remove exhibits from the pavilion can be signed at the
management office of the Organisers.
TEMPORARY PERSONNEL
Interpreters, stand attendants and security guards for your stand can be ordered using Form 1 (page 16) .
If you bring your own personnel, please make sure that you provide them with an exhibitor badge. Any security
personnel of your own are not allowed to stay in the pavilion overnight.
Premier Expo does not provide labour for the handling of goods and other items. Please contact the official freight
forwarding and handling agents for these services. See the section ‘freight, HANDLING, customs’.
CAR PARKING PASSES
Car passes allow access to the VIP parking area adjacent to the exhibition hall during the exhibition. Please order
your car passes for outdoor parking on Form 1 (page 16).
Pre-ordered car passes can be collected the day before the show starts from the management office.
If you need to enter the venue for unloading or loading local goods, you must also follow the procedure described
under The Venue.
WATER AND DRAINAGE
Please place your order on Form 2 (page 17). Items such as sinks, etc., must be ordered separately on Form 4
(page 21).
If pipes for your water connection will seriously affect the safety or image of other stands, we reserve the right to
cancel your order on-site. Therefore, we do not recommend you to order a water connection if you need the water
only for making coffee or washing dishes. Please use plastic tableware and order clearwater for a special supply of
drinking water on Form 4 (page 21).
Kyiv Build & Intertool 2014
10
4 March 2014 - 6 March 2014
GENERAL & ADDITIONAL SERVICES
TELEPHONES / INTERNET
You can order a telephone with an international line and/or an Internet connection for your stand using Form 2
(page 17).
ATTENTION!
Companies that have ordered Internet connection and installing radio-emitting equipment (Wi-Fi).
Installing of any radio-emitting equipment (except for GSM) must be confirmed by technical department on-site
in order to eliminate interference in the radio frequency range.
To perform such set-up you must know your equipment login and password.
All Internet connections ordered with us will be given as cabled line.
FASCIA NAMES AND GRAPHIC WORKS
Please indicate the company name to be shown on your fascia panel on Form 3 (page 18). You can also order
your company logo at an extra charge. If you need other graphic works for wall panels, etc., please specify these
details on Form 3 (page 18) and you will be given a quote. Exhibitors with space only sites have to contact their stand
builder to order their fascia panel or other graphic works.
FURNITURE, KITCHEN EQUIPMENT, ELECTRICAL APPLIANCES AND FITTINGS
Please refer to your space application form and to the stand layout sent with this manual to see what is included
in your package.
Additional furniture, lights, kitchen equipment, etc., can be ordered using Form 4 (page 19). Examples of the
furniture are in “Appendix -2. Pictures of additional equipment” (page 23). The organiser reserves the right not to
accept the order if it is late.
Please indicate the positions of all ordered items on your stand layout “Appendix - 3. STAND SCHEME”, ((page
27) and return it with your order forms.
Furniture, etc., for outdoor space is unavailable.
If you are interested in ordering special items not listed on Form 4, please do not hesitate to contact Premier Expo
Technical Division for information about availability and cost.
ORDER FORMS PROFORMA INVOICE
The Proforma-invoice must be returned, together with the order forms, fully completed and signed. Without the accompanying
completed Proforma-invoice your orders cannot be processed.
Please tick the yes/no boxes under “Form returned” on the Proforma-invoice to avoid confusion about missing order forms.
The deadline for returning all forms is shown on page 22.
PAYMENT
All service requirements are payable in the currency shown on the Proforma-invoice and are due no later than
one week after the invoice is received but no later than: 22 March 2014.
LATE ORDERS. ORDERS DURING THE BUILD-UP
Orders received between 8 February 2014 and 28 February 2014 are subject to a 50% surcharge.
Orders received during the build-up or during the show from 1 March 2014 and 6 March 2014 are subject to
a 100% surcharge.
Please note that if orders are late, equipment may not be available.
QUALITY OF SERVICE
ITE / Premier Expo organises successful exhibitions worldwide, especially in the CIS member countries. By
focusing on your success, our aim is to improve our services continuously. Please let us know of any problems that
you face on-site.
Kyiv Build & Intertool 2014
11
4 March 2014 - 6 March 2014
FREIGHT, HANDLING, CUSTOMS
FREIGHT FORWARDING & HANDLING ON-SITE
The official on-site freight forwarding and handling contractor is BTG Expo. Exhibitors are advised that BTG Expo
has sole rights to on-site handling, regardless of the exhibitor’s transport agent.
Please contact their office nearest to you for further details about their tariffs, shipping deadlines and customs
regulations. If your country is not listed overleaf, please contact the BTG Expo head office in Germany.
SHIPPING DEADLINES
• BTG Expo Messen requires 4 working days for all services connected with pick up at the airport, customs clearance and
delivery to the stand. In order to avoid unnecessary storage please arrange the airfreight consignment arrival in accordance
with the above information.
• For customs clearance of truck shipments BTG Expo requires 1 working day.
• Ocean freight consignments should arrive in Hamburg at the latest 16 days prior to delivery to the stand. Please do not
ship any consignments to Hamburg without confirmation from BTG Expo and get the consignee instruction for ocean freight
from BTG Expo by contacting them directly.
• For information about consolidation truck from terminal Germany, please contact BTG Expo.
• BTG Expo does not handle railway shipments.
• Please send copies (drafts) of the pro-forma invoices by e-mail to BTG Expo at the latest one week before despatch for
checking and (if necessary) a translation into Ukrainian/Russian language.
CUSTOMS CLEARANCE
Please follow the instructions of the official freight forwarder/customs clearance agent, BTG Expo.
Every exhibition centre has official customs offices. Any client sending goods with any agent other than BTG
Expo or its appointed agents must have their goods cleared by that office. If shipping exhibition goods directly, please
get the address and sender’s instructions from BTG Expo. If a shipment is addressed incorrectly, the exhibitor risks
not to receive their goods due to impossibility of customs clearance.
Do not send any goods by Courier
In order to avoid problems or delays in delivery, all shipments have to be advised to the BTG Expo office in your
country or directly to the BTG Expo head office in Germany as early as possible in advance.
If, at the end of the exhibition, items are not accounted for either by return transport or appropriate import
customs clearance, the exhibitor is responsible for any duties, VAT and luxury taxes that may be imposed by customs
authorities.
In order to avoid this, we urge all exhibitors not to hand over sold goods to the buyer directly. Arrange storage with
BTG Expo to be sure customs clearance has been arranged by the buyer. BTG Expo will hand over the goods to the
buyer you name only upon presentation of the definitive customs declaration.
You have to take into account that storage must be effected no later than the last day of the dismantling period.
Please inform the BTG Expo on-site office which is responsible for the storage charges (buyer or seller).
MAIN CO-ORDINATING OFFICE in GERMANY
BTG Expo GmbH
Carl-Benz-Strasse 21
D-60386 Frankfurt am Main
Phone: +49 (69) 408987-102
Fax: +49 (69) 408987-222
Contact: Mr Eric Awater e-mail: eric.awater@btg.de
Also you may contact our Kiev partner:
“SHERP Ils.”
Phone:
+38 044 498 66 40
Fax:
+38 044 498 66 40
Mobile phone: +38 067 657 73 03
e-mail:
Dmitry.Bilan@scherp.com.ua
Kyiv Build & Intertool 2014
12
4 March 2014 - 6 March 2014
BTG EXPO OFFICE IN YOUR COUNTRY
MAIN CO-ORDINATING OFFICE IN
GERMANY
BTG Expo GmbH
Carl-Benz-Strasse 21 D-60386 Frankfurt am Main
Phone:
+49 (69) 408987-102
Fax:
+49 (69) 408987-222
Contact: Mr. Eric Awater
e-mail: eric.awater@btg.de
Contact: Mrs. Angela Lobosco
e-mail: angela.lobosco@btg.de
ARGENTINA: BTG Expotrans S.A.
Azopardo 1337, 1° Piso, AR-C1107ADW Buenos Aires
Phone:
+ 54-(0) 11-43 62 50 30
Fax:
+ 54-(0) 11-43 62 50 80
Mrs. Laura Anchava
e-mail: Laura@btg-expotrans.com.ar
AUSTRIA: Schenker & CO AG
Zweigniederlassung Linz
Gewerbegebiet Flughafen 2, Flughafenstraße 20,
A-4063 Hörsching
Phone:
+43-(0)5 7686 271520
Fax:
+43-(0)5 7686 271529
Mr. Walter Zehetner
e-mail: walter.zehetner@schenker.at
BELGIUM / NETHERLANDS / LUXEMBURG
Van der Helm - Hudig Rotterdam BV
Debussystraat 2, NL-3161 WD Rhoon
Phone:
+31-(0) 10-506-61 89
Fax:
+31-(0) 10-506-61 85
Mr. Rene Koussen e-mail: r.koussen@hudig.com
Mr. Ger Kluter / e-mail: g.kluter@hudig.com
CHINA: BTG Beijing
Room 406-408 CIEC Business office,
Center East Road
Beisanhuan, Chaoyang District 100028-9,
Beijing P.R. China
Phone:
+ 86-(10) 8460 1137
Fax:
+ 86-(10) 6461 9507
Madame Zhong
e-mail: Zhong.yuan@btg.cn
CZECH REPUBLIC: Centrumsped s.r.o.
Tratova 1, CZ-619 00 Brno
Phone:
+ 420-(0) 547 423 165
Fax:
+ 420-(0) 547 423 160
Mrs Zuzana Sandova
e-mail: Sandova@centrumsped.cz
DENMARK: On-Site Denmark Aps
Kongevejen 18
Phone:
+ 45-(0) 32-82 02 10
Fax:
+45-(0) 32-82 02 11
Mr. Lars Skovhoj
e-mail: lars@onsitegroup.dk
ESTONIA / LATVIA / LITHUANIA:
See Latvia
e-mail: l.canot@sdv.com
HUNGARY: MASPED EXPO LTD
Albertirsai ut 10, BNV (Fair Ground) Gate VI,
P.O.Box 104 / H-1101 Budapest 4
Phone:
+ 36-(0) 1-263 7851 o. 7659
Fax:
+ 36-(0) 1-263 7892
Mrs. Maria Toth
e-mail: mtoth.expo@masped.hu
INDIA: PSBediGroup
FRANCE: SDV Fairs & Events
Zone de Fret 3, 95706 Roissy CDG
Phone:
+33-(0) 1-4919 1593
Fax:
+33-(0) 1-4919 1591
Mr. Laurent Canot
Kyiv Build & Intertool 2014
P.O. Box 6289, S-400 60 Gothenburg
Phone:
+ 46-(0) 31-707 30 70
Fax:
+ 46-(0) 31-707 30 75
Mr. Goran Magnusson
e-mail: goran@onsitegroup.se
D-10, 3rd Floor, South Extension Part-II,
New Delhi-110 049, INDIA
Phone:
+91-11 4605 5231
Fax:
+91-11 4155 2911
Mrs. Anshu Shori
e-mail: ashori@psbedi.com
SWISS: SWISS EXPO LOGISTICS AG
Zürcherstrasse 46, 8400 Winterthur / Switzerland
Phone:
+41 52 213 33 23
Fax:
+41 52 213 33 22
Mrs. Alexandra Haller
e-mail: alexandra.haller@swiss-expologistics.com
ISRAEL: ORANGE LINE
TAIWAN: OTIM-Taiwan
6th Hazorfim st. North Ind. Zone, PO BOX 1118, 71100
Lod, Israel
Phone:
+ 972-(0) 8 915 5192
Fax:
+ 972-(0) 8-760 2253
Mr. Alex Berman / e-mail: alexb@orange-line.biz
1Fl,. No: 119, Hsinhai Road, Sec. 2, Taipei, Taiwan
Phone:
+ 886-(0) 2-8733 1725 ext. # 13
Fax:
+ 886-(0) 2-8733 1726
Mr. Eddy Huang
e-mail: eddy@otim.com.tw
ITALY: COGEFRIN Group
TAIWAN: G.T.C. Glory Transwell
Corporation
Via Sommacampagna 61, C/O Interporto Q.E.
I-37137 Verona (VR)
Phone:
+39 045 8623094
Fax:
+39-045-956924
Mr. Simone Rigon
e-mail: srigon@cogefrin.it
4F-1, NO. 101, Song Jian Road, 104; Taipei, Taiwan
Phone:
+ 886 (0) 2-25090366
Fax:
+ 886-(0) 2-25090356
Mr. Steven Guo
e-mail: steven@glorytc.com.tw
LATVIA / LITHUANIA: JSC “PanLITService”
TURKEY: DHL GLOBAL FORWARDING
TASIMACILIK A.S.
Laisves Ave 5, LT-04215 Vilnius, Lithuania
Phone:
+ 370 5 244 5677
Fax:
+ 370 5 244 5803
Mr. Vaidas Beniusis / e-mail: vaidas@pls.lt or info@pls.lt
Intek Tesisleri Ikitelli Cad. No. 178, TR-34303 Halkali
Istanbul
Phone +90 212 495 11 01 ext.5902
Fax +90 212 696 31 46
Mr. Ersin Zafer
e-mail: ersin.zafer@dhl.com
Mr. Ersin Zafer
e-mail: ersin.zafer@dhl.com
LUXEMBURG / NETHERLANDS
see Belgium
POLAND: Netlog Polska Sp. z.o.o.
ul. Prądzyńskiego 12/14, 01-222 Warszawa
Phone:
+48 22 256 70 12
Fax:
+48 22 256 70 88
Mrs. Izabela Wronowska
e-mail: izabela.wronowska@netlog.org.pl
UKRAINE: FE “Scherp ILS”
Heroev Oborony str. 10A, 03127 Kiev, Ukraine
Phone:
+ 38 044 498 66 40
Fax:
+ 38 044 498 66 41
Mr. Denis Gelion
e-mail: denis@scherp.com.ua
PORTUGAL: FeirExpo SA
Avenida Severiano Falcao, 12; 2685-378 Prior Velho
Phone:
+ 351-(0) 21 8310660
Fax:
+ 351-(0) 21 8310666
Mr. Abilio Branco
e-mail: abilio.branco@rangel.pt
SLOVENIA: INTEREUROPA D.D.
Letaliska c. 35, 1000 Ljubljana
Phone:
+386-(0) 1-5868714
Fax:
+386-(0) 1-5868719
Mrs. Marija Rebernik
e-mail: marija.rebernik@intereuropa.si
FINLAND: CHS Expo Freight
It ä merenkatu 5, FIN-00180 Helsinki
Phone:
+ 358-(0) 20-7669 422
Fax:
+ 358-(0) 20-7669 439
Mr. Ossi Hämäläinen / e-mail: ossi.hamalainen@chs.fi
SWEDEN: On-Site Exhibition AB
SPAIN: Resa Expo Logistic, Division
Internacional
C/Ciencias – Entrada Nr.1, Recinto Ferial Gran Via,
P.O.Box: Apartado de correos 2045, 08908-Hospitalet
(BARCELONA)
Phone:
+ 34-(0) 93 233 4748
Fax:
+34-(0) 93 263 1894
Mrs. Yolanda de Paz
e-mail: ydepaz@resainternacional.com
13
UNITED KINGDOM: MERITEX INTL.
FREIGHT SERVICES LTD.
The Coach House, 20, Northernhay Street
Exeter, Devon EX4 3ER
Phone:
+ 44-(0) 1392 454 999
Fax:
+ 44-(0) 1392 454 998
Mr. Henry Osborne / e-mail: henry@meritex.co.uk
USA: Airways Freight Corp.
3849 W. Wedington Drive Fayetteville, AR 72704 USA
Phone :
+1 800 -643-3525-101
Fax :
+1 479-442-6080
Michael J. Beckers / e-mail: michaelb@airwaysfreight.com
For all countries not mentioned please kindly contact our
MAIN-COORDINATING-OFFICE in Germany
as mentioned above.
4 March 2014 - 6 March 2014
LOCATION OF INTERNATIONAL EXHIBITION CENTRE
LOCATION OF IEC
INTERNATIONAL EXHIBITION
CENTRE
BROVARSKOY PR-T, 15
KIEV, UKRAINE
Car:
The entrance is on Bravarskoy pr-t or NikolskoSlobodskaya st.
Metro:
Levoberezhnaya station (exit to the “Tourist” hotel
side).
Bus:
№48, 49, 108, 95, 46
Footpath:
7–9 minutes’ walk from the Levoberezhnaya station
(see the layout).
Kyiv Build & Intertool 2014
14
4 March 2014 - 6 March 2014
LOCATION OF INTERNATIONAL EXHIBITION CENTRE
CAR PARKS, ENTRY GATES
Kyiv Build & Intertool 2014
15
4 March 2014 - 6 March 2014