1. No category

SCRAGG MILL & EQUIPMENT
SURPLUS TO THE CONTINUED OPERATION OF
FOREST PRODUCTS, INC.
CORBIN, KENTUCKY 40702
SATURDAY, OCTOBER 18, 2014 • 10:00 AM EASTERN
• NICHOLSON DEBARKER • (2) LOG MERCHANDISING SYSTEMS •
• (2) SCRAGG MILLS • RESAWS •
Note: There will be a 10% onsite and 13% online Buyers Premium added to the final bid price on all items sold.
This auction will not affect the ongoing operations of Forest Products, Inc. All equipment will be sold onsite by digital
photos and Live online bidding will be available at www.bidspotter.com.
Nicholson A5 Debarker
Dated Material
Please Rush
P.O. Box 567 • Kingston, TN 37763
1-800-334-4395
AUCTION & REALTY, L.L.C.
Note: All buyers paying with a company or personal check must have a
bank letter with statement of limits. We do not accept credit/debit cards
of any kind. All sales are final and buyer is responsible for removal of
equipment. All First time buyers paying with CASH must pay a refundable 20% maximum deposit on anticipated bids when registering.
Brewer Tri Scragg
KY LIC #RP-7048
Page 2
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
Nicholson A5, Rebuilt before Installed
Another View of Brewer Scragg
Infeed to #2 Section of Scragg
Storti Horizontal Resaw
Fastline 340 Scragg
Fastline 30ʼ Log Deck
Fastline Super Edger
(2) Fastline Double End Trims
2006 Timberland Belt Transfer
Brewco Edger
Brewco Soft Ride
2006 Timberland 52ʼ Transfer
Page 3
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
Heavy Duty Log Merch. Sys
Infeed w/Hold Down
(2) 2006 Timberland Double End Trims
(2) 2006 Timberland Dedusters
Heavy Duty Ladder Back Conv
Belt Transfers of All Sizes
Lot of Belt Conveyors
Auger Conveyors
Heavy Duty Log Deck
(1) of Several Log Conveyors
Log Conveyor w/Rotary Kickers
Steel Support to Sell
Page 4
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
ʼ06 Timberland Edger
Edger Infeed Auto Set
Rebuilt Alco 38” Ring Debarker
Williams Hog
Ligna 10 x 60
Stenner Resaw, 10 Heads
Kirby 100ʼ x 125ʼ
Inside View
Log Conveyor, Ready to Load
(1) of Several Chop Saws
5 Strand Log Deck
Lots of Hydraulic Power Packs
Page 5
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
(2) Precision 58” Chippers
Precision 84” Chippers
Precision 7 x 7 Screen
Live online bidding
will be available at
www.bidspotter.com.
Check our website at
www.tristate-auction.com
for updated inventory &
additional photos.
Precision 5 x 10 Screen
Precision 67ʼ Vib Conveyor
Take advantage of
early Inspection
dates of
Oct. 16th & 17th.
Ladder Back Chip Conveyor
Aerosmith 35” Grinder
Precision barn sweep
Lots of Motors
Belt Conveyors of Various Sizes
Page 6
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
Fastline Log Merch. System
Fastline Slasher Saw
Eliminator Debarker
Fastline 204 4 Head w/Turn Around
Tyrone Berry SMA 260
Heavy Duty Incline Log Deck
• Viking Duo-Matic
• Viking Unimatic
• Viking Stacker
Salem 6ʼ Band Saw
Salem Double End Trimmer
Picture Not Available
Fastline Transfers
Lots of Electrical
More Steel Structures
Page 7
INVENTORY
MILL:
• Nicholson 22” A5 Ring Debarker; S/N5537; w/Motor & Controls; w/72” x 68”
Control Cab
• Substructure under Debarker
• Heavy Duty 24ʼ Endwise Log Conveyor;
w/110 Ladder Back Chain
• Approximately 9ʼ 5 Strand Incline Log
Conveyor; w/3 Strands of Chain Missing;
w/Drive; w/Log Lugs
• Heavy Duty 24ʼ 4 Strand Incline Log
Deck; w/Log Lugs & Drive
• Heavy Duty 28ʼ Endwise Log Outfeed
Conveyor; w/Stop Gate; w/Overhead
Hydraulic Operated Rotary Kickers;
w/Drive; w/15 HP Hydraulic Power Pack
• Belt Conveyor; 24” x 86ʼ; No Drive
• Log Merchandising System; w/64” Chisel
Tooth Slasher Saw; w/75 HP Motor; w/22ʼ
Endwise Log Infeed Conveyor; w/100
Ladder Back Chain; w/Log Hold Down;
w/Drive; w/15ʼ Endwise Log Outfeed
Conveyor; w/100 Ladder Back Chain;
w/Overhead Hydraulic Driven Rotary
Kickers; w/Drive; w/5ʼ x 5ʼ Control Cab;
w/20 HP Hydraulic Power Pack
• Extra 66” Chisel Tooth Saw
• Heavy Duty 9ʼ 5 Strand Log Incline Feed
Deck; w/1 Strand No Chain; w/Log Lugs;
w/Drive
• Heavy Duty 20ʼ 5 Strand Log Deck; w/78
Chain; One Strand Chain Missing;
w/Drive
• Waste Conveyor 38ʼ Incline w/110 Ladder
Back Chain; w/S Type Drive
• Auger Conveyor, 40ʼ; w/12” Auger;
w/Drive
• Allen Bradley Motor Control Center, 3
Section; w/(2) 100 Hp Starter;
w/Disconnect; w/(4) Size 1 Starters
w/Disconnect; w/Transformer & Panel
Board; Located Under Debarker
• Air Storage Tank, Under Debarker
• Brewer Tri Scragg; S/N-120903; w/Sharp
chain Infeed; w/Turner & Positioner;
w/Hold Down; w/(2) 50 HP Motors; w/(2)
30 HP Motors; w/Outfeed; w/24” x 18ʼ
Infeed Rolls to #2 Saw Box; w/Auto
Setworks; w/(2) 30 HP Motors on Saws;
w/Sharpe Chain Outfeed; w/Hydraulic
Power Pack; w/Controls
• Saws & Parts for Scragg
• Heavy Duty 30ʼ 4 Strand Log Deck, 40”
Wide; w/Log Loading System
• Motor Control Center for Brewer Scragg
Line; w/(2) 50 Hp Starters w/Disconnects;
w/(2) 30 HP Starters w/Disconnects; w/(2)
25 HP Starters w/Disconnects; w/(4) Size
1 Starters; w/(1) 500 Amp Disconnect
• 2006 Timberland Double End Trim, Model
T-S; S/N-TS AUTO 50001; w/Auto
Setworks; w/(2) 30 HP Motors
• Timberland 52ʼ 3 Strand Transfer Deck,
36” Wide; w/81X Chain; w/Drive; w/Pop
up Discharge Rollcase
• Steel Structure & Cat Walk Around
Brewer Scragg
• 2006 Timberland 2 Saw Edger; Model
LJED; S/N-LJ-ED-505010; w/Infeed Hold
Down & Auto Set & Positioner; w/Allen
Bradley Computerized Setworks; Motor
Controls Center; w/(2) 30 HP Motors;
w/24” Saws; w/Dual Belt Tailing System
for Slabs; w/Sharpe Chain Outfeed
• 2006 Timberland Material Belt Transfer,
52” x 25ʼ w/Drive
• 2006 Timberland Model T-S 42” Double
End Trim; S/N-TS-500012; w/(2)
Approximately 30 HP Motors; w/24”
Saws; w/Motor Control Center; w/Auto
Even End Feeder System
• Storti R16 Horizontal Rip Saw; w/(2) 50
HP Motors; w/Power Feed Rolls;
w/Infeed; w/Starter; w/Disconnects;
w/Control Center
• Material Belt, 8” x 15ʼ w/Drive
• 2006 Timberland Deduster Model D-DD;
S/N-DD5050-520012; w/Feeder System
• Belt Transfer, 31” x 9ʼ; No Drive
• Belt Transfer, 31” x 12ʼ; No Drive; No Roll
on one end
• Steel Structure Holding up Edger & Gang
Line
• Precision 58” 6 Knife Chipper; S/N-C3030; w/Horizontal Feed, Bottom
Discharge
• Parts for Chipper
• 150 HP 460 Volt 1200 RPM Motor
• Precision 5ʼ x 10ʼ High Volume Chip
Screen; S/N-S-2314
• Approximately 38ʼ Chip Conveyor; w/100
Ladder Back Chain; w/Drive
• Approximately 60ʼ Chip Conveyor; w/110
Ladder Back Chain; w/Drive
• Precision 24” x 67ʼ Vibrating Conveyor;
w/Fines Section; w/Transition Spout;
w/Drive
• Rex 18” x 35ʼ Vibrating Conveyor; w/Drive
• Belt Conveyor, 36” x 25ʼ w/Hydraulic
Drive
• Belt Conveyor, 16” x 28ʼ w/Hydraulic
Drive
• 20 HP Hydraulic Power Pack
• Precision Barn Sweep; w/52ʼ Incline;
w/Drive; w/60ʼ In Concrete; w/Metal Side
& Floor
• Precision 30ʼ Barn Sweep Flat; w/Metal
Side & Bottom
• Precision 14ʼ Barn Sweep; w/Hydraulic
Drive
• Precision Approximately 150ʼ Barn Sweep
Conveyor; w/Drive; in Concrete
• Toshiba 150 HP Starter
• Multiple Starter Box, Located in Electrical
Room; w/(1) Size 3 Starter w/Disconnect;
w/(6) Size 1 Starters w/Disconnects; w/(1)
225 Amp Main Disconnect
• Push Button Control for Chipper Area
• Pre-Fab 100ʼ x 125ʼ Long Building; w/(2)
17ʼ Doors; w/Chipper Addition, 25ʼ x 50ʼ;
w/25ʼ x 15ʼ Addition; w/Electrical Room
Addition, 14ʼ x 20ʼ
• Square D 50 KVA Transformer w/Panel
Board; w/200 Amp Disconnect
• General Electric 2000 Amp Main
Switchgear; w/(7) Disconnects
• Conduit & Wiring in Mill and Debarker
Line; Buyer must leave 1ʼ on Motors; No
Control Wires
• Brewco Wolf Edger; S/N-BE3B001;
w/Infeed; w/24” x 36” Outfeed Belt;
w/Motor & Controls
• Brewer Speed Cut Auto Chop Saw; w/14”
x 14ʼ Infeed Rollcase
• Brewer Soft Ride Unscrambler; S/NSRUB000; w/10ʼ 3 Strand Package Deck;
w/Drive
• Block Conveyor, 12” x 25ʼ w/Drive
• Koger 32” Suction Blower;
w/Approximately 25 HP Motor
• Fastline Log Merchandising System;
w/48” Chisel Tooth Saw; w/50 HP Motor;
w/240ʼ Endwise Log Conveyor Infeed;
w/Log Boom; w/Hold Down Hydraulic
Drive; w/13ʼ Outfeed w/Log Kickers;
w/Steel Support; w/5ʼ x 5ʼ Control Cab &
Controls; w/20 HP Hydraulic Power Pack
• Fastline Eliminator Debarker; w/50 HP
Motor; w/5ʼ x 5ʼ Control Cab; w/Steel
Support; w/20ʼ Outfeed Endwise Log
Conveyor; w/Log Kickers & Hydraulic
Drive; w/20 HP Hydraulic Power Pack
• Heavy Duty 20ʼ 4 Strand Incline Log
Deck; w/Log Lugs; w/Drive
• Block Conveyor, 32” x 20ʼ; No Drive
• Quincy 20 HP Screw Type Air
Compressor; Model Q25
• Ultra Ari Drying System
• Fastline Gator 340 Scragg Mill; w/Sharpe
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Chain Infeed & Outfeed; w/(2) 30 HP
Motor; w/5 HP Hydraulic Power Pack;
w/Material Belt Transfer to Edger;
w/Hydraulic Drive; w/(1) 30 HP Motor on
Horizontal Edger
Log Deck, 32” Wide x 30ʼ Long; w/Drive;
Chain missing off Middle Strand
Fastline Super Edger w/50 HP Motor; w/5
HP Hydraulic Power Pack; w/Dual Slat
Bed Outfeed; w/Hold Down & Hydraulic
Drive
Fastline 32” x 7ʼ Incline 3 Strand Material
Transfer Deck to Edger; w/Hydraulic
Drive
Material Belt, 36” x 15ʼ, w/Hydraulic Drive
Material Belt, 24” x 4ʼ w/Hydraulic Drive
Belt Conveyor, 16” x 17ʼ w/Drive
Belt Transfer, 28” x 30ʼ w/Drive
Fastline Fast Cut Double End Trimmer;
Fastline Fast Cut II Double End Trimmer
(2) Fastline Transfer Decks, 32” x 13ʼ 3
Strand; w/Drive
Fastline 204 4 Head Band Resaw; w/40
HP Motor on Each Head; w/Hydraulic
Power Pack; & Turn Around System;
w/Hydraulic Feed Rolls, w/(2) 5 HP
Hydraulic Power Packs
Fastline Transfer Deck, 3 Strand 32” x
25ʼ; w/Drive
Fastline Transfer Deck, 3 Strand 32” x 12ʼ
w/Drive
Belt Conveyor, 10” x 24ʼ w/Hydraulic
Drive
5 HP Hydraulic Power Pack
Timberland Deduster w/Feeder System
Belt Transfer Frame 36” x 19ʼ; No Belt;
Roll off one end
Belt Conveyor Frame, 20” x 55ʼ; No Belt,
No Drive
Precision 58” 6 Knife Chipper; S/N-C-648;
Horizontal Feed, Bottom Discharge
200 HP 460 Volt 1775 RPM Motor
Approximately 40ʼ All Steel Waste
Conveyor Frame for Ladder Back Chain;
No Chain, No Drive
Precision 7ʼ x 7ʼ Chip Screen; S/N-S-1147
Approximately 70ʼ Chip Conveyor Frame;
No Chain; No Drive
Industrial Air Operated Chop Saw;
w/Infeed Rollcase; w/Outfeed w/Indexing
System
Block Conveyor, 16” x 18ʼ w/Drive
Unscrambler, 4 Strand w/Drive
Package Deck, 16ʼ 3 Strand w/Drive
Viking Duo-Matic 3 Stringer Machine
Viking Stacker
Material Rolls w/Scissor Lift
Viking Uni-Matic
Belt Transfer, 36” x 11ʼ w/Hydraulic Drive
Belt Transfer, 42” x 9ʼ w/Hydraulic Drive
Belt Transfer, 38” x 44” w/Hydraulic Drive
Motor Control Center, w/(1) Size 4 Starter
w/Disconnect; w/(6) Size 1 Starters
w/Disconnects
5 HP Hydraulic Power Pack
EQUIPMENT NOT INSTALLED:
• Ligna 10 x 60 Top Arbor Thin Kerf Gang;
S/N-F162027; w/Infeed; w/Outfeed; w/(2)
200 HP Motors Control Cabs; w/Extra
Saws
• Alco 38” Ring Debarker; w/Motor &
Controls; S/N-38-8199
• Williams Pulverizer, Top Feed, Bottom
Discharge; S/N-17657; w/150 HP 460
Volt 1185 RPM Motor
• Lots of Gear Reducers & Hydraulic
Power Packs
• Ligna10 Strand Unscrambler
• Waste Conveyor of Various Sizes
• Belt Conveyors of Various Sizes
• 70ʼ Endwise Log Conveyor
• 50ʼ Endwise Log Conveyor
• Stenner 3 Head Resaw; Size 9 Horizontal
Machine Type MHS
• 1996 Stenner 7 Head Horizontal Resaw
Machine; Size B; Machine #AP10155
• Brewco Rip Saw
• Baker 2 Head Band Resaw
• Unscrambler
• Allied Size 60 Suction Blower
• Aerosmith Grinder, 35”; S/N-50-35-HH1366
• Precision 84” Chipper; S/N-S-2049;
w/Horizontal Feed, Bottom Discharge
• Baker Deduster
• Salem Edger; S/N-89=139843
• Diehl Straight Line Rip Saw
• Combination Edger 642 w/Gang Bank;
w/One Movable Saw; w/Manual Set;
w/100 HP Motor
• Frick Trimmer
• Control Cabs
EQUIPMENT LOCATED IN
WILLIAMSBURG KY:
• Tyrone Berry SMA 260 Carriage Drive;
w/Drum Package; w/125 HP 440 Volt
Motor
• Salem 6ʼ Band Saw; Connected to Air
Strain
• Schurman 36” 2 Saw Edger; w/50 HP
Motor; w/Single Belt Tailing System
• Salem 16ʼ Auto Double End Trimmer;
S/N-125105-87
• Collector Deck, 12ʼ 4 Strand; 3 Strand
w/130 Rooftop Chain; w/Drive
CONSIGNED EQUIPMENT:
• 2004 Dodge Ram 2500 Crew Cab
Pickup; w/5.7 Hemi; VIN3D7KU28DX4G148230
• 2002 Chevrolet 2500 Pickup; VIN1GCHK23172F227098
• 1991 Chevrolet Kodiak C6H042 Truck;
w/6.6L Diesel Engine; VIN1GBG6H1J7MJ111894
• 1988 International S1600 Conventional
Cab Truck; w/7.3L V-8 Diesel Engine;
VIN-1HTLAZPM6JH591500
• Air Plasma Cumaster 80XL
• Miller XR Extended Reach Wire Feeder
S/N-1KA753016
• Bortech Model #110 Borwelder, w/Pillow
Block & Line up Tools; ; S/N-000678110;
Machine for Borweld; Boring Bars
• Equipment Bucket
• Miller Diesel Powered Big Blue 400D Air
Pak
• Welder
• Miller Diesel Powered WD-5 Welder
• Brewco EZ Cut Model BEZC; S/N-EF324
• Springfield 18” x 36” Lathe; S/NU5N61533EE5-927510
• Diesel Powered Welder; S/N-KB167516
• Bolt Bins with Assorted Bolts & Nuts
• Coats 40-40SA Tire Changer
• Cherry Picker, 3 Ton Long Arm
• Janitrol Brand Heat Unit
• Scissor Jack & (2) Jackhammers
• (60 Box Type Lights
• (15) Set of Globe Lights
• (3) Globes for Lights, One Glass Globe,
(6) Light Bases for Globe
• (33) Fire Extinguishers
• (2) Trailer Axles
• (4) Tires & Rims, 225/75D 15
• Filters
• (8) Dodge Couplings
• Hydraulic Fittings & Hydraulic Hoses
• Hydrostatic Transmission & Tool Box & 6”
Air Cylinder
• (2) Trailer Tires
Check our web site for
updated inventory
www.tristate-auction.com
Page 8
Saturday, October 18, 2014
CORBIN, KY
10:00 AM EASTERN
1988 International S1600
1991 Chevy Kodiak Truck
2004 Dodge 2500 PU
EQUIPMENT TERMS
10% Onsite & 13% Online Buyers Premium
All equipment is sold “as is-where is” and no
warranty/guarantee is expressed or implied. All announcements
on sale day take precedence overany/all written material. Full
terms available at www.tristate-auction.com/terms.htm. All
equipment must be moved by July 13, 2014, no exceptions.
Diesel Powered Welder
SCRAGG MILL & EQUIPMENT
SURPLUS TO THE CONTINUED OPERATION OF
FOREST PRODUCTS, INC.
CORBIN, KENTUCKY 40702
SATURDAY, OCTOBER 18, 2014 • 10:00 AM EASTERN
10% ONSITE & 13% ONLINE BUYERS PREMIUM
Inspection Dates: October 16 & 17
Directions: From I-75 take Exit 29, take 25E South approximately 6
miles. Turn right on 233 and go approximately 1 mile and mill is on
the left. Watch for auction signs.
Airport:
Motels: Corbin, KY
Auctioneers Motel:
John C. Kimbel
CAI, CAGA
Auctioneer, Appraiser
Johnny Kimbel
CAI, CAGA, GPPA
Auctioneer, Appraiser
Sandra Kimbel-White
CAI, GPPA
Auctioneer, Broker
P.O. Box 567 • Kingston, TN 37763 • Phone (865) 376-7009 (800) 334-4395 Coast to Coast • Fax (865) 376-9103
E-Mail: auctions@tristate-auction.com • Web Site: http://www.tristate-auction.com