1. health and fitness
2. weight loss

Navigation: Page Down È | Go to Index
Safety Equipment & Consumables
Workshop,
Machinery &
Construction
Equipment
Lubricants, Sealants & Chemicals
Generators.....................................................................................106–108
Water, Transfer & Trash Pumps............................................109–110
Air Compressors............................................................................110–112
Ventilation Equipment & Parts Washers...........................113–114
Metal Bench Lathes.....................................................................114–115
Hydraulic Presses, Anvil & Tube Benders................................... 116
Pipe Benders & Roll Groover.............................................................117
Rotary Tables & Vices................................................................118–120
Bricklayers String & Builders Film................................................ 122
Compactors & Tamping Rammers..................................... 122–124
Rollers & Concrete Mixers...................................................... 124–125
Concrete Vibrators, Drive Units & Trowel Machines... 125–126
Trowels, Screeds & Floats.......................................................126–127
Welding & Abrasives
Demolition Breakers
& Hammers .......................................127–129
Cut-Off, Floor & Band Saws................................................... 129–130
Lighting Towers...................................................................................... 130
Interactive Catalogue – Click on the Page Numbers to Navigate
Clothing & Footwear
4
Machinery & Construction Equipment
Fasteners
|
| Back to Contents | Back to Index
Petrol Generators
4
Workshop, Machinery & Construction Equipment
Petrol Generator – 650W
•
•
•
•
•
•
•
•
Single phase
1.1hp
2 stroke
3,000/3,600rpm
0.65kVA
650W
220V
Rated current: 3.7amp
Yangma IE45F engine
Frequency: 50/60Hz
Recoil start
Noise level: 64dB
Air cooled
Emergency low oil warning
385(l) x 320(w) x 330(h)mm
Petrol Generator – 3kVA
•
•
•
•
•
•
•
•
•
Single phase
4hp
4 stroke
3,000/3,600rpm
3.0/3.3kVA
3,000W
240V
Rated current: 9.3amp
Yangma 173FG engine
•
•
•
•
•
•
•
•
Frequency: 50/60Hz
Recoil start
Noise level: 65db
Emergency low oil warning
Overload protection
Large muffler for quiet operation
Open frame design
680(l) x 510(w) x 540(h)mm
Description
Part Number
Description
Part Number
YM950L Petrol Generator
74010020
YM3500LQ Petrol Generator
74020030
Recoil Starter Spring Suit 650/950 Petrol Gen Set
74974276
Recoil Starter Assembly to Suit
74950190
Petrol Generator – 2kVA
•
•
•
•
•
•
•
•
•
106
•
•
•
•
•
•
•
Single phase
6.5hp
4 stroke
3,000/3,600rpm
2.0/2.5kVA
2,000W
240V
Rated current: 10amp
Yangma 168FG engine
•
•
•
•
•
•
•
•
Petrol Generator – 5kVA
Frequency: 50Hz
Recoil start
Noise level: 65dB
Emergency low oil warning
Overload protection
Large muffler for quiet operation
Open frame design
600(l) x 430(w) x 485(h)mm
•
•
•
•
•
•
•
Single phase
6.7hp
4 stroke
3,000/3,600rpm
5.0/5.5kVA
5,000W
240V
•
•
•
•
•
•
•
Rated current: 12V/8.3amp
Yangma 188FG engine
Frequency: 50/60Hz
Recoil or electric start
Noise level: 70–74dB
Emergency low oil warning
680(l) x 510(w) x 540(h)mm
Description
Part Number
Description
Part Number
YM2500LQ Petrol Generator
74020020
YM6500LQ Petrol Generator
74020050
Recoil Starter Suit 168F Petrol Engine
74974278
Recoil Starter Assembly to Suit
74974279
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Diesel Generators
4
•
•
•
•
•
•
•
Single phase
3,000rpm
230V
Frequency: 50Hz
Battery charger on electric start
Earth leakage circuit breaker (ELCB)
Low oil cut out function
74050060
Model
kVA
Wattage
Engine
Motor
Start
Tank Capacity
Dimensions
Dry Weight
Part Number
MG 5000 YE
4kVA
3,400W
Yanmar L70N
6.6hp
Recoil
2.7ltr
725(l) x 515(w) x 858(h)mm
83kg
74050054
MG 6000 I-D/AE-Y
6kVA
5,000W
Yanmar L100AE
10hp
Electric/Recoil
5.5ltr
920(l) x 460(w) x 570(h)mm
125kg
74050055
MG 6000 YE
6kVA
5,400W
Yanmar L100N
10hp
Recoil
5.5ltr
820(l) x 580(w) x 610(h)mm
125kg
74050060
MG 10000 K
10kVA
8,000W
Kubota
17hp
Electric
37.5ltr
1,156(l) x 530(w) x 952(h)mm
270kg
74050100
Spare Parts & Accessories
Description
Suitable For
To Suit Part Number
Part Number
Description
Suitable For
To Suit Part Number
Part Number
Air Filter
MG 6000, Yanmar L100N
74050060
74910109
Capacitor
MG 6000 I-D/AE-Y
74050055, 60
74910060
Air Filter
MG 6000, Yanmar L90 & L100 Diesel Engine 73060185
74910110
Capacitor
MG 10000 K
74050100
74910062
Air Filter
MG 10000, Kubota
74050100
74910112
Voltmeter
MG 6000
74050055
74910236
Oil Filter
MG 6000
74050055, 60
74910142
Diode Bridge
MG 6000, MG 10000
74050055, 100
74910090
Oil Filter
MG 10000
74050100
74910144
Diode
MG 6000, MG 10000
74050055, 100
74910082
15A Circuit Breaker MG 6000 I-D/AE-Y
74050055, 60
74910066
Fuel Filter
MG 6000
74050055
74910132
20A Circuit Breaker MG 6000 I-D/AE-Y
74050055, 60
74910068
Fuel Filter
MG 10000
74050100
74910134
Workshop, Machinery & Construction Equipment
Diesel Generators
Full range of spare parts and accessories available for Generators
including Air & Oil Filters, Recoil Starters, Universal Facing & Boring Heads,
Capacitors and more...
Diesel Generators
•
•
•
•
•
•
•
•
•
Single phase
3,000/3,600rpm
240V
Rated current: 12V/8.3amp
Frequency: 50/60Hz
Noise level: 70–74dB
Single cylinder vertical
Air cooled, direct injection
Emergency low oil warning
74050030
Description
kVA
Wattage
Engine
Motor
Noise Level
Dimensions
Part Number
Recoil Start
2kVA
2,000W
Yangma 170FG
4hp
79dB
595(l) x 410(w) x 500(h)mm
74050010
Recoil Start
2.8kVA
3,000W
Yangma 178FG
7hp
74dB
690(l) x 470(w) x 570(h)mm
74050030
Recoil Start
4.5kVA
5,000W
Yangma 186FG
9hp
79dB
720(l) x 480(w) x 650(h)mm
74050050
Electric Start
4.5kVA
5,000W
Yangma 186FG
9hp
79dB
720(l) x 480(w) x 650(h)mm
74060050
Spare Parts & Accessories
Description
Suitable For
To Suit Part Number
Part Number
Recoil Starter Assembly
170F Diesel Engine
74050010
74930190
Recoil Starter Assembly
178F Diesel Engine
74050030
74950190
Recoil Starter Assembly
186F Diesel Engine
74050050
74970190
BISHOPS
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
107
|
| Back to Contents | Back to Index
4 Silenced Diesel Generators & Spare Parts
Workshop, Machinery & Construction Equipment
Silenced Diesel Generators
•
•
•
•
•
•
3 phase
Frequency: 50Hz
Electric start
Water cooled
Emergency stop button
Auto Transfer Switch (ATS) sold separately
(except MGF 22-Y – included as standard)
• Comes with heavy duty GenSet alternator
• Exclusive GenSet engine protection shutdown system
Model
kVA
Voltage
Wattage
Engine
Motor
Speed
Noise Level
Dimensions
Part Number
MG 10 SP
10kVA @ 3 Phase
3.3kVA @ 1 Phase
230/400V
8,000W
Perkins
12.6hp
1,500rpm
62dB
1,478(l) x 657(w) x 1,091(h)mm
74072010
MG 15 SS-Y
14kVA @ 3 Phase
4.6kVA @ 1 Phase
230/400V
14,000W
Yanmar 3TNV-88
17.9hp
3,000rpm
68dB
1,500(l) x 700(w) x 1,185(h)mm
74072015
MG 20 SS-D
21.5kVA @ 3 Phase
7.5kVA @ 1 Phase
230/400V
19,000W
Deutz F3M 1001 1F
28hp
1,500rpm
64dB
1,500(l) x 700(w) x 1,185(h)mm
74072023
MGF 22-Y
22kVA @ 3 Phase,
7.35kVA @ 1 Phase
230/400V
18,000W
Yanmar 4TNV-88
24.5hp
1,500rpm
71dB
1,430(l) x 690(w) x 931(h)mm
74072022
MG 23 SS-Y
22.5kVa @ 3 Phase
7.5kVa @ 1 Phase
230/400V
19,000W
Yanmar 4TNV-88
24hp
1,500rpm
68dB
1,500(l) x 700(w) x 1,185(h)mm
74072024
MG 35 S-P
35kVA
230/400V
30,000W
Perkins 1103C-33G3
40.8hp
1,500rpm
67dB
1,974(l) x 913(w) x 1,320(h)mm
74072035
MG 50 S-P
50kVA
230/400V
40,000W
Perkins 1103C-33TG3-3
63.2hp
1,500rpm
67dB
1,974(l) x 913(w) x 1,320(h)mm
74072050
MG 70 SS-P
68kVA
230/400V
60,000W
Perkins 1104C-44TG3
80.2hp
1,500rpm
66dB
2,400(l) x 950(w) x 1,500(h)mm
74072070
230/400V
95,000W
Perkins 1104C-44TAG2
133hp
1,500rpm
69dB
3,002(l) x 1,150(w) x 1,767(h)mm
74072115
MG 115 SS-P 110kVA
Spare Parts & Accessories
Spare Parts & Accessories
Description
Suitable For
To Suit Part Number
Part Number
Description
Suitable For
To Suit Part Number
Part Number
Air Filter – Deutz
MG 20 SS-D
74072023
74910116
Fuel Filter
MG 115
74072115
74910141
Air Filter Housing
MG 20 SS-D
74072023
74910119
Change Over Switch & Panel MG 10 Type Sets
74072010
74085100
Air Filter 1 – 104(OD) x 60(ID) x 294(h)mm
MG 35 SS-P
74072035
74910118
Change Over Switch & Panel MG 15 Type Sets
74072015
74085102
Air Filter 2 – 60(OD) x 42(ID) x 286.5(h)mm MG 35 SS-P
74072035
74910120
Change Over Switch & Panel MG 20 Type Sets
74072023
74085104
Air Filter 1 – 164(OD) x 92(ID) x 356(h)mm
MG 70 SS-P
74072070
74910122
Change Over Switch & Panel MG 23 Type Sets
74072024
74085106
Air Filter 2 – 93(OD) x 73(ID) x 343(h)mm
MG 70 SS-P
74072070
74910124
Change Over Switch & Panel MG 35 Type Sets
74072035
74085108
Air Filter 1 – 162(OD) x 92(ID) x 345.5(h)mm MG 115 SS-P
74072115
74910126
Change Over Switch & Panel MG 50 Type Sets
74072050
74085109
Air Filter 2 – 93(OD) x 72(ID) x 330(h)mm
MG 115 SS-P
74072115
74910128
Change Over Switch & Panel MG 70 Type Sets
74072070
74085110
Oil Filter
MG 20 SS-D
74072023
74910148
Change Over Switch & Panel MG 115 Type Sets
74072115
74085114
Oil Filter
MG 35 SS-P
74072035
74910150
Auxiliary Contact
MG 20, MG 35, MG 70, MG 115 74072023, 35, 70, 115
74910016
Oil Filter
MG 70, MG 115 74072070, 115
74910152
Auxiliary Contact
MG 20, MG 35, MG 70, MG 115 74072023, 35, 70, 115
74910018
Fuel Filter
MG 20 SS-D
74072023
74910138
Diode Bridge
MG 20, MG 35
74072023, 35
74910092
Fuel Filter
MG 35 SS-P T 74072035
74910139
Diode Bridge
MG 70, MG 115
74072070, 74072115
74910094
Fuel Filter
MG 70, MG 115 74072070, 115
74910140
–
–
–
For all Compressor Accessories, Hoses and
Guns go to the Hydraulics, Valves, Hoses &
Fittings section, pages 433–438
108
sales@bishopbros.com.pg | www.bishopbros.com.pg
–
|
| Back to Contents | Back to Index
Water & Transfer Pumps
4
• High pressure pump
• Suitable for irrigation, gardening
and water draining
• Lightweight and portable
• Recoil start
• Maximum suction head: 8m
• 4 stroke, YM 168F-2 engine
74410020
74410030
Engine
Power
Port Size
Head
Capacity
Displacement
Self-Priming Time
Speed
Dimensions
Weight
Part Number
YM 168F-2
4,000W/5.5hp
50mm/2"
26m
25m3/h
163cc
180s/4m
3,600rpm
480 x 430 x 400mm
20kg
74410020
YM 168F-2
4,800W/6.5hp
80mm/3"
28m
60m3/h
196cc
60s/4m
3,600rpm
505 x 415 x 470mm
31kg
74410030
Spare Parts & Accessories
Description
Suitable For
To Suit Part Number
Part Number
Recoil Starter
168F Petrol Engine
74410020, 74410030
74974278
Diesel Water Pumps
•
•
•
•
•
High pressure pump
Suitable for irrigation, gardening and water draining
Lightweight and portable
Recoil start
Maximum suction head: 8m
74440020
Workshop, Machinery & Construction Equipment
Petrol Water Pumps
74430030
Engine
Power
Port Size
Max. Head
Capacity
Displacement
Self-Priming Time
Speed
Dimensions
Weight
Part Number
YM 170F
2.5kW/3.4hp
2"
26m
36m3/h
211cc
70s/4m
3,000rpm
490 x 420 x 500mm
35kg
74430020
YM 178F
3.8kW/5.2hp
3"
28m
60m3/h
296cc
120s/4m
3,000rpm
600 x 470 x 530mm
52kg
74430030
YM 178F
4.4kW/6.0hp
2"
65m
30m3/h
296cc
60s/4m
3,600rpm
590 x 475 x 540mm
57kg
74440020
Spare Parts & Accessories
Description
Suitable For
To Suit Part Number
Part Number
Description
Suitable For
To Suit Part Number
Part Number
Recoil Starter Assembly
170F Diesel Engine
74430020
74930190
Recoil Starter Assembly
178F Diesel Engine
74430030, 74440020
74950190
Diesel Driven Transfer Pumps
•
•
•
•
Self priming from 8 metres
High volume water transfer
Fast fill tanker applications
Flood irrigation
• Construction site dewatering
• Viton seals fitted
• Adjustable for pumping diesel fuels
and some chemicals
74440050
74440060
Engine
Start
Motor
Max. Head
Max. Flow
Inlet/Outlet
Part Number
Yanmar
Recoil
4.8hp
28m
700ltr/min
2"
74440050
Yanmar
Recoil
4.8hp
30m
1,050ltr/min
3"
74440055
Yanmar
Electric
4.8hp
30m
1,050ltr/min
3"
74440056
Kubota
Electric
9.0hp
30m
1,600ltr/min
4"
74440060
BISHOPS
Claw & Camlock Couplings,
Joiners and more available in the
Hyrdraulics, Valves, Hoses & Fittings
section, pages 441–443
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
109
|
| Back to Contents | Back to Index
Trash & Submersible Pumps, Drain Cleaner & Air Compressor
4
Workshop, Machinery & Construction Equipment
3” Trash Pump
PT 3H
• Hatz diesel air-cooled, single cylinder, 4-cycle engine
• Max. discharge head: 29mm
• Max. discharge: 1,515ltr/min
• Max. suction lift: 7.6m
• Solid size capacity: 38mm
• Displacement: 347cm3
• 5kW (6.8hp)
• Max. speed: 3,500rpm
• Fuel tank capacity: 5ltr
• Fuel consumption: 1.7ltr/hr
• Weight: 73kg
Submersible Pump
MSP-3
• Aluminium casting body
• Discharge diameter: 73mm/3”
• Max. lift: 18m
• Max. capacity: 1,300ltr/min
• 3,000–3,600rpm
• 5m hose
• 22kg
76550160
K-1500B Drain Cleaner Kit
76550200
6” Trash Pump
PT 6LS
• This high performance pump is the ideal choice for moving large volumes of water
• Discharge elbow rotates 360º to accommodate various discharge angles
• Automatic engine shutdown protects engine from damage due to
low oil pressure or high cylinder temperature
• Lombardini 11LD625-3 diesel 3 cylinder
air-cooled, 4-cycle engine
• Displacement: 1,870cm3
• Max. speed: 2,500rpm
• Max. rated power: 24kW
• Fuel consumption: 4.5ltr/hr
• Fuel tank capacity: 114ltr
• Discharge head: 30.5m
• Pressure: 3 bar
• Flow rate: 4,933ltr/min
• Suction lift height: 7.5m
• Max. solids diameter: 50mm
• Weight: 850kg
33922
• All-round sewer and drain cleaning machine
• Low-profile frame design fits most crawl spaces
• Easy to use and transport
• Powerful 0.75hp 240V motor
• Equipped to handle 15ft sections
of 11⁄4" cable to clean 3"–8"
(32–200mm) lines
to 200ft (61m)
• Weight: 95kg/210lb
64080850
For Drive Pump
Units, continue
on to page 125
76550220
Submersible Pump
SP55/6
• For use with Wacker Neuson diesel and petrol drive units
• Suitable for pumping from waste pits, dams, drainage trenches,
footing, tanks, swimming pool excavations, and many other applications
• Handles solids up to 15mm
• Impeller can be adjusted to compensate for wear, without requiring special tools
• Rugged, low maintenance design
• Lightweight and self-priming
• Quick release drive coupling
• External protection spirals
• Heavy duty lifting eye
• Corrosion resistant cast iron body
• Multiple long-life seat
• Quality reliability
• 6m flexible shaft
76550180
110
Cyclone Portable Electric
Air Compressor
AIR150
• 12V DC, 23amp
• 150psi
• Flow rate: 37.5ltr/min
• Complete with coil
hose and gauge with
sports adaptor kit
• Handy travel bag included
73010105
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Electric Air Compressors
4
Super Tiger 245 Portable Electric Air Compressor
•
•
•
•
•
•
•
•
1,500W
240V
Displacement: 8.7cfm, 245ltr/min
Max. air pressure: 116psi/8bar
50ltr capacity
Noise level: 79dB
890(l) x 380(d) x 720(h)mm
Weight: 26kg
Workshop, Machinery & Construction Equipment
• Cast iron cylinder; steel valve plate
• Overload protection of electric
motor with manual reset
• Pressure switch; Pressure reducer
with manometer and cock
• Comes with regulator
• Two wheels for easy transportation
• 2hp
• 2,850rpm
73010190
Electric Air Compressors
73010250
• Belt driven
• Splash lubrication, forced ventilation, cast iron cylinder
• Pressure switch
• Condensate drain cock
• Max. air pressure: 145psi/10bar
73010250, 73010245, 73010320 & 73020110
• Piston compressor two cylinder 90°V placed
• Aluminium valve plate and steel valves
• Overload protection of electric motor with manual reset
• Pressure reducer with one or two cocks
• Comes with regulator and gauge
73020280 & 73020620:
• Piston compressor three cylinders W placed
• Overload protection of electric motor with thermal relay
• Ball line cock
• Steel valve plate and steel valves
• Final manifolds for cooling the air entering the tank
73025100 & 73025150:
• Piston compressor two cylinder 90°V placed
• Splash lubrication, cast iron cylinder,
cast iron valve plate and steel valves
• Final manifolds for cooling the air entering the tank
• Overload protection with thermal relay
• Ball line cock
73010320
73020280
73010245
73020110
73025150
Description
Stage
Motor
Phase
Voltage
Wattage
Displacement
Weight
Part Number
Mobile
1
3.0hp
1
230V
2,200W
10.4cfm, 295ltr/min 100ltr
Tank Capacity Noise Level
79dB
Speed
1,320rpm 1,100(l) x 470(d) x 790(h)mm
Dimensions
70kg
73010245
Mobile
1
3.0hp
3
400V
2,200W
11.5cfm, 325ltr/min 50ltr
76dB
1,450rpm 890(l) x 380(d) x 690mm
72kg
73010250
Mobile
1
3.0hp
1
240V
2,200W
14.1cfm, 399ltr/min 60ltr
76dB
820rpm
70kg
73010320
Stationary
1
5.5hp
3
415V
4,100W
22.6cfm, 640ltr/min 300ltr
78dB
1,180rpm 1,500(l) x 510(d) x 1,120(h)m
215kg
73020110
Stationary
1
7.5hp
3
415V
5,500W
38cfm, 1,076ltr/min 270ltr
79dB
1,180rpm 1,580(l) x 530(d) x 1,130(h)mm 262kg
73020280
Stationary
1
10hp
3
415V
7,500W
52cfm, 1,472ltr/min 270ltr
79dB
1,190rpm 1,580(l) x 530(d) x 1,130(h)mm 273kg
73020620
Stationary
2
7.5hp
3
400V
5,500W
22cfm, 623ltr/min
270ltr
84dB
1,220rpm 2,000(l) x 600(d) x 1,140(h)mm 216kg
73025100
Stationary
2
10hp
3
400V
7,500W
45cfm, 1,274ltr/min 270ltr
80dB
1,080rpm 1,550(l) x 550(d) x 1,200(h)mm 220kg
73025150
930(l) x 430(d) x 760(h)mm
Electric Screw Air Compressors
• 3 phase
73050200
73050115
Description
Motor
Wattage
Displacement
Max. Air Pressure
Tank Capacity Noise Level
Dimensions
Weight
Part Number
Plus 3008
30hp
22,000W
117cfm, 3,300ltr/m
116psi/8bar
N/A
72dB
1,110(l) x 680(d) x 1,040(h)mm
365kg
73050115
MCi 5008
50hp
37,000W
208cfm, 5,900ltr/m
116psi/8bar
N/A
71dB
1,530(l) x 870(d) x 1,400(h)mm
605kg
73050200
BISHOPS
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
111
|
| Back to Contents | Back to Index
Petrol & Diesel Air Compressors
4
Workshop, Machinery & Construction Equipment
Portable Petrol Air Compressors
• Piston compressor two cylinder 90°V placed
• Splash lubrication, forced ventilation, cast iron cylinder and steel valves
• ON/OFF pressure switch
• Two rear wheels for ease of transport
73030110 Only:
• Aluminium valve plate
• Overload protection
• Pressure reducer with one or two cocks
• Condensate drain cock
73030120 Only:
• Cast iron valve plate
• Final manifolds for cooling the air entering the tank
• Overload protection with thermal relay
Engine
Motor
Wattage
Displacement
Capacity
Speed
Noise Level
Dimensions
Weight
Part Number
Loncin G200F 196CC
5.5hp
4,100W
11.5cfm
100ltr
1,450rpm
76dB
1,100(l) x 500(d) x 820(h)mm
70kg
73030110
Loncin G200F 196CC
6.5hp
4,500W
14.1cfm
60ltr
1,450rpm
85dB
1,200(l) x 620(d) x 890(h)mm
82kg
73030120
Diesel Air Compressors
• Recoil or electric start
• Emergency stop button
• Portable compressor comes
fitted with four wheels
Spare Parts & Accessories
73060185
Description
Suitable For
To Suit
Part Number
Air Filter
Yanmar L 100 Diesel Engine
73060185
74910110
Description
Engine
Motor
Wattage
Displacement
Max. Air Pressure
Capacity
Speed
Noise Level
Dimensions
Weight
Part Number
Portable
Yanmar L48
4.7hp, 3 cyl
3,500W
17.3cfm
140psi
70ltr
1,024rpm
95dB
1,120(l) x 400(w) x 870(h)mm
117kg
73060175
Stationary
Yanmar L70
6.7hp, 3 cyl
5,000W
31.0cfm
140psi
125ltr
969rpm
99dB
1,470(l) x 470(w) x 1,060(h)mm
206kg
73060180
Stationary
Yanmar L100
10hp, 2 cyl
7,500W
33.2cfm
175psi
120ltr
1,392rpm
98dB
1,150(l) x 540(w) x 1,090(h)mm
246kg
73060185
Portable Diesel Air Compressors
• Direct driven
• Progressive volume flow regulation
• Soft start; start by rotary switch
• Operational reliability
• Air end with spin-on oil filter cartridge
• Controller with digital display
73055035 Only:
• Bolted single sheets
• Transparent plastic fuel tank
• Inside main switch board
• Automatic stop in case of malfunction
73055050 & 73055070 Only:
• Bolted single sheets
• Air filters
• Transparent plastic fuel tank
• Inside main switch
• Automatic stop in case of malfunction
• Flexible mudguards
73055080 Only:
• Side wing doors with a wide upwards opening angle
• Separate air filters for engine and air compressor
• Automatic stop in case of malfunction
• Flexible mudguards
112
Engine
Wattage
Motor
Displacement
Capacity
Max. Air Pressure:
Noise Level
Dimensions
Part Number
Kubota D1505
23,100W
31hp
105cfm
40ltr
103psi/7bar
69dB/98LwA
2,947(l) x 1,200(w) x 1,194(h)mm
73055035
Yanmar A2300
33,500W
45hp
180cfm
60ltr
103psi/7bar
69dB/98LwA
3,241(l) x 1,490(w) x 1,327(h)mm
73055050
Cummins B3.3TAA
63,000W
84hp
270cfm
140ltr
103psi/7bar
71dB/99LwA
3,760(l) x 1,700(w) x 1,440(h)mm
73055070
Cummins QSB4.5
97,000W
130hp
400cfm
210ltr
126psi/8.6bar
71dB/99LwA
4,440(l) x 1,820(w) x 1,790(h)mm
73055080
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Air Recievers, Ventilators, Fume Extractor Tube & Parts Washers
• For use in industrial compressed air systems
• Vertical design to maximise floor space
• 4 x 2" BSP inlet and outlet sockets
Grab Parts Washer Cleaner & Degreaser
from the Janitorial, Hygiene, Crib & Leisure
Products section, pages 216–217
Tank Capacity
Design Pressure
Diameter
Overall Height
Weight
Part Number
530ltr
1,215kPa (176psi)
640mm
2,140mm
233kg
73060120
820ltr
1,225kPa (178psi)
780mm
2,215mm
390kg
73060140
Champion G11XD Filters
• Used with stationary air compressors
90ltr Light Duty Electric Parts Washing Tank
•
•
•
•
Description
Part Number
Pre-Filter
66560600
Post-Filter
66560610
Spring loaded safety lid
Flexible metal hose and nozzle
Storage shelf under tank
Tank dimensions:
730(l) x 500(w) x 230(h)mm
Workshop, Machinery & Construction Equipment
Vertical Air Receivers
4
Portable Ventilator Sets
• Compact in size, easy to operate
• Aluminium blades
• Suitable for use in manholes,
underground tunnels, shipyards
and other narrow places
• Includes fume extractor tube
30208020
76585200
110ltr Parts Washer
Diameter
Flow Rate
Tube Length
Voltage
Part Number
12"
60–70m2/min
5m
240V
76585100
24"
70–90m2/min
10m
415V
76585200
Fume Extractor Tube
• Suit portable ventilator (76585100) with 12" diameter ducting
• Length: 5m
76585390
BISHOPS
SG79135
• 375mm deep soak basin
• 240V industrial grade pump
• 40°C, 1,000W heater
with separate switch
• Flex spigot and nylon flow-thru brush
• Clean out plug for easy draining
• Operation capacity: 95ltr
• Includes stainless steel work shelf,
filter kit and circulating pump
• Overall dimensions: 900(l) x
600(w) x 975(h)mm
• Shipping weight: 37kg
30208027
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
113
|
| Back to Contents | Back to Index
4 Parts Washers & Metal Bench Lathes
Workshop, Machinery & Construction Equipment
219ltr Parts Washer
Mini Metal Bench Lathe – 250 x 500mm
SG79265
• 225mm deep soak basin
• 240V industrial grade pump
• 40°C, 1,000W heater with separate switch
• Flex spigot and nylon flow-thru brush
• Clean out plug for easy draining
• Operation capacity: 205ltr
• Includes stainless steel work shelf,
filter kit and circulating pump
• Overall dimensions: 1,012(l) x
750(w) x 975(h)mm
• Shipping weight: 45kg
•
•
•
•
•
•
•
•
•
•
•
•
3 phase
750W
240V
1.5hp
Frequency: 50Hz
21mm spindle bore
Spindle: MT3
Spindle speed: 150–2,500rpm
Distance between centres: 550mm
Max. swing over bed: 250mm
Centre height: 125mm
Bed width: 135mm
• 1,015(l) x 500(w) x 500(h)mm
(without stand)
• Stand included
Accessories
• 3 jaw chuck (125mm)
• Quadruple tool holder
• Chip sump
• Rear splash guard
• Lathe chuck protection
• 2 centres
• Tool kit with accessories
and change gears
30208029
292ltr Part Washer
SG79185
• Heavy duty stainless steel construction
• 700mm deep soak basin (at deepest point)
• 240V industrial grade pump
• 40°C, 6,000W heater
(element lead requires hardwiring)
• Operation capacity: 260ltr
• Self-cleaning agitating platform
• Includes non-adjustable
back-up thermostat
• Overall dimensions: 1,310(l) x
850(w) x 1,650(h)mm
• Shipping weight: 260kg
75550100
Metal Bench Lathe – 360 x 1,000mm
•
•
•
•
•
•
•
•
•
•
•
30208030
1,100W at 3 phase
1,500W at 1 phase
3.0hp
Spindle speed: 65–1,810rpm
5MT, 38mm dia. spindle
230V
Frequency: 50Hz
Distance between centres: 1,000mm
Max. swing over bed: 360mm
Centre height: 179mm
Bed width:206mm
Accessories:
• 3 jaw chuck (160mm)
• Change gears set
• 3MT dead centres
• 3MT and 5MT reduction sleeves
• Oil gun
• Tool box with tools
• Foot stands
• Splash guard and oil tray
Find Lathe &
Machining Tools in
the Hand & Cutting
Tools section,
pages 377–390
75550200
114
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Metal Bench Lathes
4
• Fitted with a safety torque limiting
device and overload clutch
• 3 phase
• 4 jaw chuck
• 4,000W/5.4hp at 1 phase
• Optional 5,500W/7.5hp at 3 phase
• MT6, D1-6/58mm spindle bore
• Spindle speed: 25–2,000rpm
• Distance between centres: 1,500mm
• Max. swing over bed: 410mm
• Centre height: 205mm
• Bed width: 300mm
Accessories:
• 3 jaw chuck (250mm)
• Driving plate
• Centre and centre sleeves
• Oil gun
• Wrenches
• Operation manual
75550400
Metal Bench Lathe – 460 x 1,500mm
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Precision ground
Fitted with safety torque limiting device
3 phase
4,000W/5.4hp at 1 phase
Optional 5,500W/7.5hp at 3 phase
415V
50Hz
Spindle speed: 25–2,000rpm
MT6, D1-6/58mm spindle bore
Capacity: 1,500mm
Distance between centres: 1,500mm
Centre height: 230mm
Bed width: 300mm
Max swing over bed: 460mm
Accessories:
• 3 and 4 jaw chucks
• Change gears set
• Chasing dial indicator
• Reduction sleeve
• Dead centres
• Tool box with tools
• Full length splash guard
• Brake and coolant system
• Steady rest and follow rest
Workshop, Machinery & Construction Equipment
Metal Bench Lathe – 410 x 1,500mm
75550460
Metal Bench Lathe – 560 x 2,000mm
• 3 phase (415V, 50Hz)
• 7,500W
• 10hp
• Spindle speed: 25–1,600rpm
• MT7, 80mm spindle bore
• Distance between centres: 1,500mm
• Centre height: 1,160mm
• Max. swing over bed: 560mm
• Bed width: 350mm
Accessories:
• 3 jaw and 4 jaw chucks
• Quick change tool set
• Leadscrew cover
• Steady rest
• Dead centre
75550560
Metal Bench Lathe – 560 x 3,000mm
• 3 phase
• 7,500W
• 10hp
• 380V
• Frequency: 50/60Hz
• MT7, D1-8/80mm spindle bore
• Spindle speed: 25-1,600rpm
• Distance between centres: 3,000mm
• Max. swing over bed: 560mm
• Centre height: 1,160mm
Accessories:
• 4 jaw chuck
75550600
BISHOPS
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
115
|
| Back to Contents | Back to Index
Hydraulic Presses, Anvil, Tube Benders & Straightener
4
Workshop, Machinery & Construction Equipment
Hydraulic Shop Presses
Lever Tube Bender
• Can bend up to 180° angle
• Suitable for light duty applications
• Easy to use and has clearly
marked measurements
• 6mm capacity
64010210
Tube Bender
68114
• Accepts pipes with an outside diameter of 12, 15 and 22mm
• Weight: 3.5kg
Capacity
Stroke
Work Range
Weight
Part Number
12t
175mm
0–920mm
63kg
77060012
20t
182mm
0–910mm
82kg
77060020
30t
160mm
0–840mm
150kg
77060030
50t
175mm
0–890mm
243kg
77060050
75t
250mm
226–1,042mm
425kg
77060070
100t
280mm
0–950mm
900kg
77060099
Forged Anvil
69622
• The RIDGID Pedding-Haus® anvil has long
stood for quality and craftsmanship
• Pedding-Haus® anvils are drop-forged
and produced entirely from high grade
steel for maximum durability
• The top face is ground and
induction hardened to provide
a lively surface to work on
• Horn: 5.5"
• Face: 8"
• Weight: 35kg/77.1lb
64020583
64010250
3-in-1 Combination Tube Bender
68111
• Accepts pipes with an outside diameter of
6, 8 and 10mm or 1⁄4”, 5⁄16” and 3⁄8”
• Bending capabilities of 0–180°
64010030
Rebar Bender/Straightener
Find Rubber Hammers in the Hand
& Cutting Tools section, page 345
DBR-32WH
• Can bend and straighten up to 32mm
rebar with 500N/mm2 tensile strength
• Bending speed: 4 seconds/90°
• 240V
• 660 x 270 x 200mm
• Weight: 26kg
75040120
116
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Pipe Benders & Roll Groover
1000
• Well established and proven bending
technology and process developed
with co-operation from pipe and
tube designers/manufacturers
to accommodate a huge range
of their product
• Round and square pipes
• Thick and thin walled pipes
• Bends by drawing pipe through
former and rollers
• The TruForm bender can bend pipes
in many directions and through various
degrees in the shortest possible length of
pipe. This versatile feature means that the
Dawn TruForm bender can be used for
virtually any application
• Robust construction
Hydraulic Pipe Benders
• Heavy gauge plate
bender with hardened
tool steel former/roller sets
• Will bend mild steel, stainless
steel and aluminium pipes
• Used for steel fencing, street sign
posts, gates, handrails, bench frames,
cattle, sheep and horse stockyards,
exhaust systems, bull bar construction,
trampolines, commercial furniture, fire
sprinkler systems, compressed air lines,
playground equipment, boat trailers,
ladder racks, roll bars and sheds
• Bend angle range: 0–180°
• Includes former sets: Round 15, 20, 25,
32, 40 and 50nb; Square 20, 25, 30,
35, 40 and 50mm
• Angle of bend: approx 90°
• Suitable for bending steel pipes
• 609(w) x 546(d) x 1,555(h)mm
77050050
Pipe OD Capacity
Ram
Stroke
Weight
Part Number
15–50mm
12t
232mm
38.5kg
77050050
15–75mm
15t
238mm
57.5kg
77050075
Hydraulic Pipe Bender
PB-10N
• Complete unit with frame, cylinder, pivot shoes, angle gauge and pipe shoes
• Designed to bend various thicknesses of steel pipes without wrinkles
• Frame is made of an aluminium alloy making it lighter and easier to transport
• Can be powered by a variety of 700 bar power sources
• Pump not included; choice of hand,
air/hydraulic or electric
• 15–50mm nominal bore gas/water pipe
• Hinged top plate
• Pipe shoes included: 15mm, 20mm,
25mm, 32mm, 40mm and 50mm
• Weight without pump: 18.6kg
Workshop, Machinery & Construction Equipment
Truform Bender
4
77050310
Curvamatic Hydraulic Pipe Benders
• Designed to bend water, oil and gas steel pipes
with maximum comfort and speed
• Provides optimum consistency and safety
• Anchored on a rotating tripod
• 2-VELO automatic valve
system for fast preloading
• 360° rotating base
60016
61099130
Heavy Duty Pipe Bender Set
62168
• Fame and former system designed in conjunction
with tube manufacturers
• Suitable for use in: water services, gas services, handrails,
gates, framework, galvanised, gas, water and steam pipes
• Comes complete with six super grade iron formers:
15, 20, 25, 32, 40 and 50mm
• 10t rating
• Robust construction
• Quick bending and release action
• Bends pipes with excellent results
• Hydraulic unit is based on military jack design
• Simple set up and operation
• Portable
61099115
BISHOPS
Product Code
Description
Pipe Size
Capacity
Weight
Part Number
60015
Curvamatic 2
6–50mm
10t
75kg
77050150
60016
Curvamatic 3
6–75mm
13t
110kg
77050175
915 Roll Groover
88232
• Lightweight design suitable for stainless steel, copper and PVC pipes
• Easy to use depth setting gauge
• Up to 12" pipe capacity in one unit for service versatility
• Cast-in carrying handle for easy transport or lock-up to prevent theft
• Includes 90° bend-in handle to make grooving easier
• Customised tool box available
• Pipe capacities:
11⁄4"–12" schedule 10 steel and stainless steel
11⁄4"–6" schedule 40 steel
11⁄4"–2" schedule 40 stainless steel
2"–8" K, L, M, DWV copper
11⁄4"–6" schedule 40 PVC
11⁄2", 21⁄2"–3" schedule 80 PVC
• Weight: 10.4kg/23lb
75590402
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
117
|
| Back to Contents | Back to Index
Rotary Tables & Vices
4
Workshop, Machinery & Construction Equipment
Rotary Tables
• Can be used horizontally
or vertically
• Practical design and
excellent performance
• Used for circular work,
angle cost setting,
boring, spot facing
and more
Need a Drill Press?
Head to the Power &
Pneumatic Tools section,
pages 142–143
75598505
Universal Machine Vice
Centre Hole MT
Centre Hole Dia.
Table Dia.
Weight
Part Number
#2
25 x 6mm
160mm/6"
23kg
75598504
#3
30 x 6mm
200mm/8"
31.5kg
75598505
#4
40 x 10mm
320mm/12"
77kg
75598510
• 360° rotatable base
• Tiltable body
• Base can be secured
to stable bench top
61098125
Machine Vice
•
•
•
•
•
•
•
•
•
•
For drilling, shaping and milling machines
360º swivel base
Base can be secured to bench or stand
Mechanical clamping
Body made of high quality cast iron
Max. jaw opening: 160mm
Jaw width: 200mm
Jaw height: 63mm
Weight: 52kg
Dimensions:
530(l) x 310(w)
x 240(h)mm
Jaw Width Jaw Height
Max. Jaw Opening Dimensions
75mm
34mm
80mm
300(l) x 180(w) x 150(h)mm 11kg
Weight
61098075
125mm
46mm
100mm
350(l) x 195(w) x 200(h)mm 28kg
61098125
Drill Press Unigrip Vice
DPV/UG/125
• Manufactured from graded cast iron
• Precision ground base and vice bed for
smooth lateral movement of the jaw
• Longitudinal and transversal prisms in the fixed jaw allow for firm
gripping of round pieces both horizontally and vertically. Special
seat in jaws facilitates retaining of flat work pieces
• Convenient unigrip mechanism. Spindle moves inside the hollow
hand grip allowing the vice to be used at a location away from the
table edge, increasing the scope of application
• Jaw width: 120mm
• Max. jaw opening: 110mm
61598720
Machine (Drill Press) Vices – Super Grade
•
•
•
•
Accurately machined slide
Case hardened, replaceable “V” notched jaws
ACME thread screw
Corrosion resistant screw
and forged handle
• Slots for hold down
mounting bolts
• Also available with
125mm jaws
61098860
Drill Press Unigrip 3 Way Vice
Product
Code
Vice Jaw
Width
Max. Jaw Jaw
Opening Height
Weight
Dimensions
Part Number
60219
75mm
60mm
27mm
4.6kg
170(l) x 135(w) x 64(h)mm
61598702
60220
100mm
120mm
37mm
11.6kg 240(l) x 190(w) x 82(h)mm
61598704
Plain Base Hydraulic Machine Vice
•
•
•
•
•
•
•
Hinged pipe vice
Strong ductile iron frame
Ideal for repetitive clamping tasks on pipework
Can be fitted to bench or stand
3.2–152.5mm, 50–305mm capacity
Dimensions: 960(l) x 252(w) x 136(h)mm
Weight: 58kg
76045910
118
DPV/UG/3/100
• Manufactured from graded cast iron
• Precision ground base and vice bed
for smooth lateral movement of the jaw
• Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of
round pieces both horizontally and vertically special seat in jaws facilitates
retaining of flat work pieces
• Convenient unigrip mechanism. Spindle moves inside the hollow hand
grip allowing the vice to be used at a location away from the table edge,
increasing the scope of application
• Also available with 3 mounting options via 2 additional precisely ground
surfaces: end face and side face. This allows for drilling along all axes
with a single setting of the job and holding of long workpieces which are
cumbersome and difficult to manage in regular vices
• Jaw width: 100mm
• Max. jaw opening: 88mm
61098850
sales@bishopbros.com.pg | www.bishopbros.com.pg
Part Number
|
| Back to Contents | Back to Index
Vices
Offset Engineer’s Vices
• All steel construction, built to withstand the shocks of
hammering, chipping and other tough applications
• Each vice has an integrated anvil for shaping and beating, an extra
heavy-duty sliding jaw, large diameter steel screw and forged tommy bar
• Carbon steel jaws are hardened 50±5HRC to withstand
tough use and are serrated for non-slip grip
• Safety stopper at the end of slide prevents
it from fall during usage
Regular
• Australian designed ‘Offset Advantage’ which
allows the user to work on long vertical
sections with the full width of the jaws without
obstruction from the main body of the vice
• High strength cast iron body, slide and nut
• Corrosive resistant ACME threaded screw
• ‘V’ notched, case hardened replaceable jaws
• Swarf deflector
• Forged steel handle
• Also available with 150mm jaws and all
sizes available in Super Grade Ductile Iron
Offset
Product Code
Description
Jaw Width
Jaw Opening
Weight
Part Number
EBV/F/100
Regular Vice
100mm
120mm
6.3kg
61098260
EBV/F/150
Regular Vice
150mm
150mm
17.2kg
61098265
EBV/F/200
Regular Vice
200mm
200mm
36kg
61098270
OBV/F/100
Offset Vice
100mm
120mm
7kg
61098280
OBV/F/150
Offset Vice
150mm
175mm
20kg
61098285
Standard Engineer’s Vices
•
•
•
•
Original Dawn 100% Australian made and designed heavy duty vice
High strength cast iron body, slide and nut
Corrosive resistant ACME threaded screw
“V” notched, case
hardened, replaceable jaws
• Swarf deflector
• Forged steel handle
• All fixed vices also available
in Super Grade Ductile Iron
Vice Size
Jaw Width
Max. Jaw
Opening
Weight
Dimensions
Part Number
60151
75mm
85mm
5.4kg
250(l) x 120(w) x 113(h)mm
61598020
60153
100mm
115mm
16kg
367(l) x 163(w) x 177(h)mm
61598040
60156
150mm
175mm
33.4kg
497(l) x 195(w) x 215(h)mm
61598060
60157
200mm
225mm
57.8kg
650(l) x 237(w) x 275(h)mm
61598080
60163
100mm
115mm
18.8kg
367(l) x 215(w) x 205(h)mm
61598090
60165
125mm
145mm
27.5kg
445(l) x 238(w) x 225(h)mm
61598100
60166
150mm
175mm
39.9kg
497(l) x 265(w) x 252(h)mm
61598110
60167
200mm
225mm
74.6kg
650(l) x 335(w) x 336(h)mm
61598120
Product Code
Product Code
Vice Size
Jaw Width
Max. Jaw
Opening
Weight
Dimensions
Part Number
60178
100mm
115mm
26.6kg
418(l) x 267(w) x 210(h)mm
61598140
60180
125mm
145mm
39.4kg
492(l) x 294(w) x 231(h)mm
61598150
Fabricated Offset Engineer’s Vices
• Australian designed ‘Offset Advantage’ which allows the user
to work on long vertical sections with the full width of the jaws
without obstruction from the main body of the vice
• Designed for all heavy duty work
• Manufactured from steel plate
• Corrosive resistant screw
• Replaceable case
hardened jaws
• “V” notched jaw to
hold round objects
• Precision machined
bearing surface ensuring
smooth operation
• Also available with
125 and 200mm jaws
• Left hand offset versions also available
Workshop, Machinery & Construction Equipment
Engineer’s Steel Bench Vices
4
Fixed
Swivel
Fabricated Engineer’s Vices
•
•
•
•
•
•
•
•
•
Designed for all heavy duty work
Manufactured from steel plate
Corrosive resistant screw
Replaceable case hardened jaws
‘V’ notched jaw to
hold round objects
Forged steel handle
Cast iron nut
Precision machined
bearing surface ensuring
smooth operation
Also available with 125
and 200mm jaws
Vice Size
Jaw Width
Max. Jaw
Opening
Weight
Dimensions
Part Number
60212
100mm
115mm
11.2kg
342(l) x 188(w) x 138(h)mm
61598440
60214
150mm
175mm
25kg
496(l) x 282(w) x 189(h)mm
61598460
Offset Engineers’ Vice – Super Grade
60197
• Australian designed ‘Offset Advantage’ which allows the user to
work on long vertical sections with the full width of the jaws without
obstruction from the main body of the vice
• Super Grade ductile iron which is guaranteed against breakage
• Provides positive grip without springing
and are ideal for heavy duty applications
• This world class vice which is unique to Dawn
is simply the best vice a tradesman can own
• Australian made and long lasting
• Jaw width: 150mm
• Max. jaw opening: 175mm
• Weight: 55.5kg
• 550(l) x 348(w) x 265(h)mm
61598160
Find Quick Action and T Bar
Clamps in the Hand & Cutting
Tools section, pages 312–313
Product
Code
Vice Size
Jaw Width
Max. Jaw
Opening
Weight
Dimensions
Part Number
60205
100mm
115mm
10.5kg
342(l) x 150(w) x 138(h)mm
61598340
60207
150mm
175mm
22.6kg
495(l) x 200(w) x 192(h)mm
61598360
BISHOPS
Product Code
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
119
|
| Back to Contents | Back to Index
Vices & Pipe Support Stand
4
Workshop, Machinery & Construction Equipment
Standard Woodworkers’ Vices
Pipe Vice
61202
• Capacity: 1⁄8”–2”
•
•
•
•
•
•
•
Robust castings
Generous jaw area
Long life
Replaceable nut
Corrosion resistant screw and handle
Square body for ease of fitting to bench
Large diameter slide
bars for smooth
parallel operation
• Provision for
attaching wooden
liners to protect work pieces
• 175mm version also available
with ‘peg’ feature
61598545
Product Code
Vice Size Jaw Width
Max. Jaw Opening
Weight
Part Number
60241
175mm
225mm
7.8kg
61598604
60242
200mm
225mm
8.4kg
61598606
60243
225mm
300mm
12.6kg
61598608
60244
250mm
300mm
13kg
61598610
Heavy Duty Vee Head Pipe Stand
•
•
•
•
Folding legs for easy storage
Heavy duty ACME thread
Pipe capacity: 300mm/12"
Weight capacity: 900kg
Mechanics Vice
• Manufactured from high quality grey iron castings
• Very strong with excellent shock absorbing capacity
and immense strength under compression
• Machined to close tolerances and are designed for smooth operation and reliability
• Fully enclosed vice spindle keeps threads protected from contaminants and damage
• Long unbreakable malleable iron nut ensures maximum thread surface
contact and constant alignment between the body and sliding jaw
• Jaws are hardened 45±5HRC
• Perfect alignment of main
screw and nut reduces
wear and gives long
trouble-free service
Product Code
Jaw Width
Jaw Opening
Weight
Part Number
BV/F/100
100mm
125mm
9.2kg
61098210
BV/F/150
150mm
175mm
15.7kg
61098215
BV/F/200
200mm
200mm
32kg
61098220
Chain Pipe Vices
•
•
•
•
•
•
•
•
Equipped with machine cut, heat treated, replaceable jaws
Can be rapidly tightened to provide a very powerful grip
Chain type bottom screw
Super grade ductile iron
Popular plumbers tool
Sturdy, compact design
High tensile chain
Extra lengths of chain can
be added to accommodate
larger diameter pipe
Tri-Stand with Chain Vice
61200
• Collapsible and stable frame,
perfect transportable workbench
• Capacity: 1⁄8”–6”
• Holes and slots for attaching various tools
• Holes for bending of pipes
with diameters 3⁄8”, 1⁄2” and 3⁄4”
• Screw fixture for 1” pipe to
enable overhead support
• The vice base overhangs
front legs in order to allow
the free working movement
64070910
Pipe Support Bracket
60179
• Adjustable height: 750–1,200mm
• Weight: 5.0kg
Product Code
Type
Pipe Capacity OD
Weight
Part Number
60272
C2
65mm
1.8kg
64070510
60273
C4
120mm
4.5kg
64070520
60274
C6
175mm
7.9kg
64070540
Get cutting with Hacksaw
Blades in the Hand & Cutting
Tools section, page 359
120
75595502
75595500
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Soil Compaction Information
Relative Desirability of Soils as Compacted Fill
Gravel
Group Symbol
Sand
GW
GP
GM
GC
SW
SP
SM
SC
Well graded
gravels, gravel
sand mixtures,
little or no fines
Poorly graded
gravels, gravel/
sand mixtures,
little or no fines
Silty gravels,
poorly graded
gravel, sand, and
silt mixtures
Clay-like gravels,
poorly graded
gravel, sand, &
clay mixtures
Well graded
sands, gravelly
sands, little or no
fines
Poorly graded
sands, gravelly
sands, little
or no fines
Silty sands,
poorly graded
sand/silt mixtures
Clay-like sands,
poorly graded
sand/clay
mixtures
–
–
9
10
–
–
7
8
Core
–
–
7
10
–
–
5
9
Shell
10
9
–
–
8*
7*
–
–
Erosion Resistance
10
9
7
8
5
4*
3*
6
Compacted
Earth Lining
–
–
7
10
–
–
6**
9
Seepage Important
–
–
10
9
–
–
8
7
Seepage Not Important
10
8
7
5
9
6
4
3
Fills – Frost Heave Not
Possible
10
8
9
6
9
5
5
4
Fills – Frost Heave
10
8
2
6
9
7
10
5
Surfacing
3
–
6
10
7
–
6
2
Soil Type
* If Gravelly
** Erosion critical
*** Volume change critical
– Not appropriate for this type of use
Relative Desirability for Various Uses (10= Best; 1= Least Desirable)
Homogeneous
Embankment
Rolled Earth
Fill Dams
Canal Sections
Foundations
Roadways
Workshop, Machinery & Construction Equipment
Soil Compaction Information
4
Information provided as a guideline only.
Equipment Applications
Material
Plate Compactors
Reversible Plate Compactors
Tamping Rammers
Drum Vibratory Rollers
Granular Soils
1
2
–
2
Sand & Clay
2
1
2
1
Cohesive Clay
–
3
1
3
Asphalt
1
3
–
1
1= Provides optimum performance for most applications. 2= Provides acceptable performance for most applications.
3= Limited performance for most applications. Testing required.
Information provided as a guideline only. Jobsite variables can affect machine performance.
BISHOPS
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
121
|
| Back to Contents | Back to Index
4 Bricklayers String, Builders Film & Compactors
Workshop, Machinery & Construction Equipment
Bricklayers String Line Reel
LF80 Plate Compactor
• 8 strand braided nylon
• 100m
Colour
Part Number
White
62522080
Green
62522082
Orange
62522084
Pink
62522086
Builders Film
• Polyethylene plastic
• 200μm
• 2 x 50m
3382 0000 25
• Suitable for compacting thin to medium layers of granular
soils, block paving, repair jobs and maintenance work such
as driveways, pavements and parking lots
• Specially shaped bottom plate
• Unique vibration-reduced handle
• Stowable handle for easy transportation and storage
• Long life V-belt thanks to cooling fan and ventilated cover
• Plate width: 420mm
• Centrifugal force: 19kN
• Power: 4,100W
• Speed: 33m/min
• Amplitude: 1.3mm
• Frequency: 95Hz
• Vibration emission
value: 1.2m/s2
• Noise level: 103dBA
• Operating mass: 82kg
76510124
LG500 Plate Compactor
Colour
Part Number
Black
66030062
Clear
66030064
Fill up your
machine with a
Fuel Can from
page 271 in the
General Industrial
Products section
76510126
Plate Compactors
•
•
•
•
•
•
•
•
•
122
3382 0000 62
• Designed for compacting medium to deep layers of granular
soils, block paving and confined areas such as trenches,
parking lots and foundations etc
• Hydraulic forward/reverse lever
• Hatz engine with low fuel consumption and emissions
• Heavy-duty protection frame and impact resistant steel
covers protect engine and transmission
• High quality
bottom plate
• 2 x extra 150mm
plates fitted
• Plate width: 550mm
• Centrifugal force: 60kN
• Power: 8,200kW
• Speed: 24m/min
• Amplitude: 2.1mm
• Frequency: 60Hz
• Vibration emission value: 2.1m/s2
• Noise level: 109dBA
• Operating mass: 559kg
Plate Compactor
WP 2050A
• Honda GX 160 petrol air-cooled, single cylinder, 4-cycle engine
• Base plate size: 500 x 586mm
• Max. rated power: 3.6kW @ 3,600rpm
• Max. speed: 3,600rpm
• Centrifugal force: 20kN
• Vibrating frequency: 97Hz
• Max. travel speed: 28m/min
• Max. gradability: 30%
• Max. compacted area: 840m2/hr
• Fuel tank capacity: 3.7ltr
• Fuel consumption: 1.8ltr/hr
• Weight: 100kg
Air-cooled, 4-cycle engine
Base plate size: 460 x 610mm
Overall dimensions: 1,100 x 460 x 600mm
Max. forward travel: 28m/min
Max. compacted area: 770m2/hr
Max. gradability: 35%
Vibration frequency: 116.6Hz (7,000vpm)
Centrifugal force: 19.8kN
Operating speed: 3,600rpm
Product Code
Engine
Max. Rated Fuel
Fuel Tank Operating
Displacement
Type
Power
Consumption Capacity Weight
Part Number
VPH 70
Petrol
163cm3
Honda
4.1kW
(5.5hp)
1.27ltr/hr
3.6ltr
77kg
76510120
VPY 70
Diesel
211cm3
Yanmar
3.5kW
(4.7hp)
0.96ltr/hr
2.5ltr
90kg
76510122
76510210
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Compactors & Tamping Rammers 4
• Conveniently placed handles makes them easy to reach
• Open design reduces dirt build-up and makes cleaning easier
• Air-cooled, 4-cycle, single cylinder
MS60-2
MS100-1
• Ideal for sand, gravel and mixer
• Powerful design for compaction
soils in narrow trenches and along
of sand, gravel, grit and
foundations, walls and abutments
granular materials
• Foldable handle for easy
• Vibration isolated reversible
transportation and stock
handle for easy operation and
• Radius base plate for easy
reduced operator fatigue
access to corners
• Centrally mounted fully enclosed
• Sealed belt cover to protect
exiter for an even spread of
from sand and soil
compactive force over the
• Heavy duty shock mounts
whole base plate
reduce vibration to the
• Heavy duty shock mounts
upper engine and handle
reduce vibration to the upper
• Built-in wheels for easy
engine and handle
transportation
MS90-2
• Malleable iron base
provides longer life
• Easily remove water tank
with built-in valve
• Rounded base plate for
easy access to corners
• Located in the centre
of the rising bar makes
it easier to transport
• Timing is protected from
sand and dirt
• Built-in wheels for
easy transportation
MS60-2
MS100-1
MS90-2
Product Code Engine Type
Power
MS60-2
Petrol 168F
4,000W, 4.5hp 62kg
Operation Mass Frequency Centrifugal Force Compaction Depth Travel Speed Efficiency Plate Size
5,600vpm 10.5kN
200mm
24m/min
450m2/hr 360 x 500mm 1,080(l) x 400(w) x 800(h)mm
76510365
MS100-1
Diesel Kipor 170
3,100W, 4.2hp 104kg
7,000vpm 19.8kN
300mm
27m/min
770m2/hr 460 x 610mm 1,100(l) x 460(w) x 660(h)mm
76510375
MS90-2
Petrol Loncin MG200 4,800W, 6.5hp 91kg
5,500vpm 13kN
300mm
24m/min
600m2/hr 530 x 500mm 1,100(l) x 830(w) x 500(h)mm
76510385
Reversible Plate Compactor
DPU 4045Ye
• Yanmar L70N diesel air-cooled, single cylinder, 4-cycle engine
• Electric and recoil starter
• Base plate size: 460 x 900mm
• Centrifugal force: 40kN
• Vibration frequency: 69Hz
• Max. advance travel: 20m/min
• Max. surface capacity: 864m2/hr
• Displacement: 320cm3
• Max. power output: 4.9kW @
3,600rpm, 4.3kW @ 3,000rpm
• Fuel tank capacity: 3.3ltr
• Fuel consumption: 1.4ltr/hr
• Weight: 356kg
76510125
MSH160-1
• Conveniently placed handles makes them easy to reach
• Large heavy shock mounts reduce vibration to the handle and upper deck
• Wear-resistant base plates extend life and the open design reduces dirt build up
• Centrally located lifting bar allows easy transportation in and out of trenches
• Wrap around protection cage protects
the plate from accidental jobsite damage
• Engine type: Diesel Kipor 178
• Power: 4,400W, 6hp
• Operation mass: 165kg
• Frequency: 4,000vpm
• Centrifugal force: 30.5kN
• Compaction depth: 500mm
• Travel speed: 15m/min
• Efficiency: 570m2/hr
• Plate size: 730 x 370mm
• Dimensions: 860(l) x 570(w) x 930(h)mm
BISHOPS
Part Number
Tamping Rammer
BS 60-4S
• Wacker Neuson WM 100 gasoline
air-cooled, single cylinder, 4-cycle engine
• Low oil shut down protection
• Shoe size: 280 x 342mm
• Stroke: 48mm
• Percussion rate: 660bpm
• Travel speed: 7.8m/min
• Max. area capacity: 132m2/hr
• Displacement: 97cm3
• Max. rated power: 2.4kW @ 4,200rpm
• Power rating specification: SAE J1995
• Fuel tank capacity: 3ltr
• Fuel consumption: 1.2ltr/hr
• Weight: 71kg
76560125
Reversible Plate Compactor
76510350
Dimensions
Workshop, Machinery & Construction Equipment
Plate Compactors
Diesel Tamping Rammer
DS 70
• Yanmar diesel air-cooled, single cylinder, 4-cycle engine
• Shoe size: 280 x 330mm
• Stroke: 75mm
• Percussion rate: 700bpm
• Travel speed: 13m/min
• Max. area capacity: 148m2/hr
• Displacement: 211cm3
• Max. rated power: 3.1kW @ 3,450rpm
• Power rating specification:
SAE J1349, ISO 3046-1 IFN
• Fuel tank capacity: 4.2ltr
• Fuel consumption: 0.9ltr/hr
• Weight: 83kg
76560120
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
123
|
| Back to Contents | Back to Index
4 Tamping Rammers, Rollers & Concrete Mixer
Double Drum Vibratory Roller
Workshop, Machinery & Construction Equipment
Tamping Rammers
MDR65L
• Suited for more rugged construction site jobs
• Fitted with a fully hydraulic drive system
• Safe to use due to reversing protection and deadman control
• Ergonomically designed handle and controls
• Lombardini 15LD440 engine
• 8,100W power
• Travel speed: 0–3.6km/h
• Water tank capacity: 65ltr
• Driven by 4-stroke petrol engine designed specifically for rammers
• Heavy duty throttle control provides more reliable and longer service
• Double built-in filtration system provides cleaner air to engine for
longer life and improved durability
• Integrated fuel valve for easy starting
• Heavy shock mount system to reduce hand-arm
vibration and improve operator comfort
• Plastic oil tank offers longer life and rust-free
• Rammer shoe made of steel plate with wooden
insert offers economical usage
MR68H
• Special protective frame for engine
• Specially designed trolley kit for easy transportation
• High quality German made polyurethane bellow – more
compacting force and offers a reliable lubricating system
• Air-cooled, 4-cycle, single cylinder
MR75R
• Fuel tank capacity: 3.0ltr
• Dimensions:430(l) x
• Shoe size: 330(l) x 285(w)mm
760(w) x 1,020(h)mm
Product
Code
Engine
Type
Power
MR68H
Honda
GX100
MR75R
Robin
EH12-2D
Operation
Mass
Percussion Impact
Rate
Force
Jumping
Stroke
Part Number
2,200W,
68kg
3hp
650–695/
13kN
min
40–85mm
76560135
3,000W,
75kg
4hp
640–680/
14kN
min
40–80mm
76560130
LT6004 Tamping Rammer
3382 0000 02
• Used for compacting medium to deep layers of cohesive soils, such
as clay or silt but also sand and gravel, repairing jobs and in confined
areas such as trenches, around pillars and on housing sites
• High centrifugal force and speed provide
deep and effective compaction
• Easy access to all daily service points
• Sealed, multi-function tank with
throttle control (stop/idle/run)
• Honda 4-stroke engine with new carburettor
• Patented air breather system for easy start
• Efficient shock absorbers
• 280mm/11" pad
• Force/blow: 14.8kN
• Power: 2,200kW
• Speed: 15–18m/min
• Amplitude: 65–75mm
• Frequency: 12Hz
• Vibration emission value: 4.9m/s2
• Noise level: 104dBA
• Operating mass: 75kg
76560155
MSR58H
• Lightweight and manoeuvrable
• Ideal for smaller maintenance jobs including work
on footpaths, bridges and landscaping areas
• Fitted with a fully hydraulic drive system
• Safe to use due to reversing protection and deadman control
• Ergonomically designed handle and controls
• Honda GX160 engine
• 4,000W power
• Travel speed: 0–1.5km/h
• Water tank capacity: 15ltr
124
Double Drum Roller
RD 7H-ES
• Hatz diesel air-cooled, single-cylinder,
four-cycle engine
• Displacement: 413cm3
• Fuel consumption: 1.67ltr/min
• Drum diameter: 420mm
• Side clearance: 235mm
• Curb clearance: 30mm
• Centrifugal force: 13kN
• Frequency: 55Hz
• Linear force (static):
5/7.4N/mm (front/rear)
• Linear force (dynamic per drum):
10N/mm (front and rear)
• Advance travel: 66.7m/min
• Reverse travel: 33.3m/min
• Max. surface capacity: 2,613m2/hr
• Gradability: 40%
76515220
Single Drum Vibratory Roller
76515110
76515210
Electric Concrete Mixer
MX10
• Economical, non-maintenance and easy to use mixer
• Made with a single piece steel sheet gear ring
• Easy to store and transport due to its foldable frame
• The large 240mm diameter wheels provide both stability and manoeuvrability
• The large drum delivers high quality mixing results
• Can be tilted and swivelled in a full 360°
rotation for complete discharge
• The driving shaft is mounted
on a sealed ball bearing
providing ease of movement
• 250W
• Output: 75ltr (2.6cft)
• Working dimensions:
1,150(l) x 800(w) x 1,250(h)mm
• 100ltr capacity
76505290
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Concrete Mixers, Concrete Vibrators, Drive Units & Trowel Machine 4
Drive Units
• Suitable for small
and occasional
construction jobs
• Ideal for mixing
mortar in
small volumes
• Easy to transport
• Cast iron gear ring
• 178F hand start
diesel engine
76505330
Power
Drum Speed
Filling Volume
Discharge
Volume
Dimensions
Weight
Part Number
4–9hp
25–30rpm
260ltr/9.2cft
170ltr
1.90 x 1.17 x
1.42m
313kg
76505320
5.5–9hp
16–20rpm
350ltr/12.3cft
260ltr
1.90 x 1.17 x
1.65m
338kg
76505330
• Robust protective cage
• Dish base for ease of use
• Rugged, low maintenance design
• Overall dimensions: 460 x 460 x 530mm
• Max. speed: 2,800rpm
YD 3.5:
• Displacement: 211cm3
• Fuel tank capacity: 2.5ltr
• Fuel consumption: 0.78ltr/hr
ED 1.6:
• Cast iron coupling housing – no need for springs
• Input voltage: 240V
• Input current: 9.6amp
Product Code
Engine Type
Power
Operating Weight
Part Number
YD 3.5
Yanmar L48 Diesel
3.5kW (4.7hp)
39kg
76520150
ED 1.6
Electric
1.6kW (2.1hp)
33kg
76520154
Drive Units
•
•
•
•
•
Ezyvibe4 Portable Vibrator
EZYVIBE4
• Honda GX 35 petrol air-cooled, 4-stroke, single cylinder engine
• Recoil start
• Head diameter: 45mm
• 1.2kW (1.6hp)
• Operating speed: up to 7,500rpm
• Max. rated power: 1.2kW @ 7,000rpm
• Piston displacement: 35.8cm3
• Power rating specification: SAE J1995
• Fuel tank capacity 0.65ltr
• Fuel consumption: 0.6ltr/hr
• Weight: 11.5kg
To suit concrete vibrator pokers
Rubber mounts to reduce vibration
4 cycle, single cylinder
Air cooled
Recoil start
MVD-2
Workshop, Machinery & Construction Equipment
Concrete Mixers
MVD-4
Product Code
Description
Part Number
MVD-2
Loncin G160F Petrol Engine, 5.5hp, 4.0kW
76520130
MVD-4
Honda GX160 Petrol Engine, 5.5hp, 4.0kW
76520140
76520210
Find Laser Rangefinders
and Levels in the Hand
& Cutting Tools section,
page 350
Concrete Vibrator Pokers
•
•
•
•
Hard nose
6m flexible shaft
Vibrator head length: 442mm
Revolution of flexible shaft:
3,000–3,600rpm
• Low output speed helps extend
the service life of the poker
• Is interchangeable between
both electrical and petrol or
diesel engine drive units
Product Code
Vibrator Amplitude
Approximate Weight
Head Dia.
Part Number
MV32
1mm
11kg
32mm
76590120
MV50
1.3mm
16kg
50mm
76590150
MV70
1.4mm
17kg
70mm
76590160
Concrete Vibrators
• For use with Wacker Neuson drive motors
• Flexible shaft length: 6m
• *Compaction diameter is dependant on concrete consistency
Helicopter Trowel Machine
• Low maintenance and long-life design
• Ideal 36” diameter trowel for running pans,
combination blade or finishing blades
• Over-built gearbox provides long service life
• Heavy weight design to assure a superior finish
• Height adjustable handle gives operator comfort and easy control
• Lifting tube as standard feature allows trowel to be
transported on the job-site with only two people
• Centrifugal safety switch shuts the engine down in the
event of the operator losing control of the unit
• Screw control ensures
precise blade adjustment
• Air-cooled, 4-cycle, single cylinder
• Honda GX160 petrol engine
• 4,800W, 6.5hp
• Operation mass: 91kg
• Rotor diameter: 910mm
• Guard diameter: 940mm
Product Code
Head Dia. Vibrations
Effective Compaction Dia.*
Weight
Part Number
Product Code
Description
Part Number
FWP 40/6
40mm
12,000/min
800mm
18kg
76590200
MT36-2
Helicopter Trowel Machine
76580180
FWP 57/6
57mm
12,700/min
1,000mm
23kg
76590210
MT36-2 BLADE Trowel Blade to Suit Masalta MT36
BISHOPS
76595190
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
125
|
| Back to Contents | Back to Index
4 Trowel, Screeds & Floats
Workshop, Machinery & Construction Equipment
Edging Power Trowel
MT24-4
• Low maintenance and long-life design
• Economical solution for trowelling small surfaces, edges and corners
• Independent rotating flywheel, allowing operation in tight corners and in confined spaces
• Foldable handle for easy transportation and storage
• Lifting hook available as standard
• Over-built gearbox assures long service life
• Heavy weight design to assure a suitable finish
• Height adjustable handle, with optional deadman switch,
provides operator with comfort and easy control
• Centrifugal safety switch shuts the engine down
in the event of the operator losing control of the unit
• Screw control ensures precise blade adjustment
• Throttle control is available
• Honda GX160 petrol engine
• 4,000W, 5.5hp
• Operation mass: 63kg
• Rotor diameter: 610mm
• Guard diameter: 610mm
Concreting Screeds
• Clamp on style handle fixed with level bubble, which may be
reversed to the working face for second use
• Fitted with end plugs and power coated for easy clean-up
Product Code
Length
Part Number
SC18
1,800mm
63578100
SC36
3,500mm
63578120
Aluminium Bullfloats
•
•
•
•
76580170
Ideal for floating large areas of concrete
Fitted with an aluminium blade and a double rib construction providing extra strength
The float is properly balanced and long wearing
The bracket assembly included is compatible with all standard threaded handles
Product Code
Description
Size
Part Number
AB9
Aluminium Bullfloat
900mm
63578160
AB15
Aluminium Bullfloat
1,500mm
63578162
H076
Telescopic Handle
2.4–4.8m
63578164
Magnesium Float
Find all your painting
and building needs in
the General Industrial
Products section
from page 235
H252
• Floats help in preparing a surface for trowelling or creating a rough finish
• Cast from magnesium and recommended for use with air-entrained concrete
• The handle is attached with secure torque pad screws and its
design provides more knuckle clearance for the user
• Perfectly balanced with a broken-in design
• 84(w) x 510(l)mm
Wet Screeds
• Extremely mobile device concept
• Easy to operate
• Encapsulated eccentric
casing to protect against
dirt, concrete and splash water
63578262
Wood Floats
• Floats help in preparing a surface for
trowelling or creating a rough finish
• Constructed from clear, seasoned wood
• Typically used for levelling out concrete
before the final finishing stage
126
Product Code
Description
Part Number
Product Code
Size
Part Number
P35A
Power Unit – Honda 4 Stroke
76590300
H801
112(w) x 300(l)mm
63578220
SB-8F
Screed Bar – 2,400 x 124mm
76590305
H802
112(w) x 380(l)mm
63578222
SB-12F
Screed Bar – 3,700 x 124mm
76590310
H824
65(w) x 600(l)mm
63578226
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Trowels, Power Pack & Demolition Breakers 4
Stainless Steel Vee Jointer
Hydraulic Breaker & Power Pack
63578275
Stainless Steel Edgers
• Sturdy steel mounting
• Used to produce a radius at the edge
of a concrete slab to help prevent
the edge from chipping off
• Specially designed handle provides
a soft feel which reduces fatigue
and offers excellent durability
Workshop, Machinery & Construction Equipment
Hydraulic Breaker
• Low vibration handle mechanism
• High blow energy and frequency
for high productivity
• Unique return blow action
• Progressive starting ‘feathering’
MB20/20
action allows the user to accurately
place the tool and mark out
before engaging full power
• Economical to operate and simple to maintain
• Can be used safely with alternative
power sources such as excavators,
skid steer loaders and road rollers
• 1,600bpm
• Flow: 20ltr/min
• Pressure: 98–138bar
• Weight: 20kg
Hydraulic Power Pack
• Power on demand, even
better fuel economy,
reduces exhaust emissions
• Oil level sight gauge
• Tough steel cover, stronger protection
• Extra heavy duty steel sub frame
• Wheels and folding handle,
easy on site transport
• Honda GX270 petrol engine
• 9hp
• Flow: 20ltr/min
• Pressure: 138bar
• Weight: 65kg
H301S
• Used to form ‘dummy’ joints in concrete paving
• Joint in the concrete reduces the thickness of the paving and if
cracking occurs, the crack should be at the line of the joint
• Constructed from long wearing steel
• Specially designed handle
with resilient comfort grips
to help reduce fatigue
• Blade: 75(w) x 10(d)mm
MHP9/20
Product Code
Blade
Size
Part Number
Product Code
Description
Part Number
H403S
10mm Radius
140(l) x 75(w) x 19(h)mm
63578265
MB20/20
Hydraulic Breaker
76560138
H414S
45° Angle
125(l) x 25(bevel)mm
63578272
MHP9/20
Hydraulic Power Pack
76560139
Trowels
TEX 32PS Pneumatic Demolition Breaker
• Shaped and tempered from the
highest grade spring steel
• The ergonomic handle
is comfortable, reduces
fatigue and is very durable
• The mounting is made
from an aluminium alloy
making it lightweight
but still very strong
Pointed
Square
8461 0227 03
• Suitable for general demolition
in medium and hard materials
such as asphalt and concrete
• Two handles for greater control
• Noise reduction
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston
• Air consumption: 34ltr/s
• Impact rate: 1,200bpm
• Noise level: 111dBA
• Bore: 48mm
• Stroke: 155mm
• Length (without chisel): 745mm
• Weight: 34kg
3083 3274 00
3083 3271 00
Product Code
Description
Gauge
Size
Part Number
H101
Pointed Trowel
Light
120(w) x 365(l)mm
63578202
H109S
Pointed Trowel – Stainless Steel
Light
100(w) x 355(l)mm
63578208
Product Code
Description
Size
Part Number
H191S
Pointed Trowel – Stainless Steel
Light
115(w) x 405(l)mm
63578210
8461 0227 03
TEX 32PS Pneumatic Demolition Breaker
–
76590540
H102
Square Trowel
Light
120(w) x 280(l)mm
63578214
3083 3274 00
Narrow Hex Chisel to Suit TEX 32PS
28 x 160mm
76590545
H162
Square Trowel
Heavy
120(w) x 280(l)mm
63578216
3083 3271 00
Moil Point Chisel to Suit TEX 32PS
28 x 160mm
76590550
Keep safe with Earmuffs, Earplugs and
Dust Masks in the Safety Equipment &
Consumables section, pages 38–42
BISHOPS
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
127
|
| Back to Contents | Back to Index
4 Demolition Breakers & Hammers
Workshop, Machinery & Construction Equipment
TEX 230PE Pneumatic Demolition Breaker
8461 0225 34
• Suitable for service jobs and general demolition
• For use in soft and medium material
• Two handles for greater control
• Solid Body concept
• Noise reduction
• HAPS™ Hand and Arm
Protection System (PE series)
• SOFSTART™ two-step trigger
• Rotating air inlet swivel
• Integrated lubricator
• Air cushioned piston
• Shank size: 28 x 160mm
• Air consumption: 30ltr/s
• Impact rate: 1,320bpm
• Noise level: 106dBA
• Bore: 44mm
• Stroke: 140mm
• Length (without chisel): 670mm
• Weight: 27kg
76590541
GSH16-30
• Extremely high material removal rate – up to 13t per day
• Long lifetime due to robust design and
high quality material construction
• Vibration control allows longer operating time
• Trolley is supplied as standard for
easy and convenient transportation
• Excellent handling thanks to the large handle
• The perfectly positioned on/off switch prevents
the tool from being switched off unintentionally
• Rated power input: 1,750W
• Impact energy: 45J
• Impact rate at rated speed: 1,300bpm
• 760(l) x 255(w)mm
• Weight: 16.5kg
75008095
Cobra Combi Petrol Drill & Breaker
8318 0800 08
• Self-contained breaker and drill with single cylinder, 2-stroke engine
• Used for drilling and splitting rocks, breaking concrete,
cutting asphalt, tamping, compacting, driving
spikes, tubes, poles, ground rods, probes
and digging ditches and holes
• Can sink holes to depth of 2m and drill up to
30cm/min into solid granite
• Two handles for greater control
• Easy to transport and quick set-up time
• HAPS™ Hand and Arm Protection System
• Low noise and emissions
• Shank size: 22 x 108mm
• Power: 2,000W
• Fuel consumption: 1.3–1.5ltr/hr
• Max impact rate: 2,700bpm
• Drill rotation speed: 250rpm
• Noise level: 108dBA
• Width across handles: 585mm
• Size (without chisel): 732(l) x 281(d)mm
• Weight: 25kg
76540140
Petrol Breaker
Demolition Hammer – 1,750W
Demolition Hammer – 1,900W
GSH 27 VC
• High material removal rate due
to impact force of 69J
• Very low vibration (only 8m/s²) thanks
to the decoupled handles and the
vibration-reduced hammer mechanism
– for a longer trigger time per day
• Extended lifetime thanks to high-quality
aluminium and steel components
• Ergonomic handles with soft grip and a low
centre of gravity allow optimum handling
• Anti-slip surface prevents
the tool from falling over
• Rated power input: 1,900W
• Impact energy: 69J
• Impact rate at rated speed: 1,000bpm
• Weight: 29.5kg
75008100
BH 65
• Wacker Neuson WM 80 gasoline air-cooled,
single cylinder, 2-cycle engine
• Single stroke impact energy: 65J
• Percussion rate: 1,250bpm
• 4.6m/s² hand-arm vibrations
• Displacement: 80cm3
• Operating performance: 1.7kW (2.31hp)
• Max. speed: 4,100rpm
• Fuel tank capacity: 1.8ltr
• Fuel consumption: 1.1ltr/hr
• Weight: 25kg
Demolition Hammer SDS-Max
• 12 chisel position settings for convenience
• Constant electronic capabilities
GSH 5 CE
76540120
128
Product Code
Rated Power Input
Impact Energy
Impact Rate
Weight
Part Number
GSH 5 CE
1,150W
2–13J
1,300–2,900bpm 6.2kg
75008092
GSH 11 E
1,500W
6–25J
900–1,890bpm
75008090
sales@bishopbros.com.pg | www.bishopbros.com.pg
10.1kg
|
| Back to Contents | Back to Index
Breakers, Demolition Hammers & Cut-Off Saws
7 Piece Air Hammer Set
8461 0219 00
• Suitable for light-duty chipping, scaling, renovation,
conversion work and demolition
• D-shape handle with airline attachment
• Noise reduction
• Air cushioned piston
• Air consumption: 9.5ltr/s
• Impact rate: 2,760bpm
• Noise level: 104dBA
• Bore: 28mm
• Stroke: 45.7mm
• Length (without chisel): 380mm
• Weight: 5.5kg
• Alloyed steel cylinder and piston improves the lifetime of the product
• Round shank
• Shank opening: 10.2mm
• 3,200bpm
• Avg. air consumption: 4.0cfm (113ltr/min)
• Air pressure: 90psi (6.3bar)
• Air hose: 3⁄8"
• Sound pressure: 98dBA
• Overall length: 175mm
• Weight: 1.7kg
Includes:
• 1 x air hammer
• 5 piece chisel kit
• 1 x spring retainer
73610030
350mm Portable Cut-Off Saw
Product Code
Description
Size
Part Number
8461 0219 00
TEX 05P Pneumatic Chipping Hammer
–
76590500
3083 3222 00
Narrow Hex Chisel to Suit TEX 05P
19 x 52mm
76590505
TEX 12PS Pneumatic Pick Hammer
8461 0211 13
• Used for light-duty chipping, scaling, renovation,
conversion work and demolition
• SOFSTART™ two-step trigger
• D-shape handle with airline attachment
• Noise reduction
• Air cushioned piston
• Cap type tool retainer
• Air consumption: 21.3ltr/s
• Impact rate: 1,600bpm
• Noise level: 105dBA
• Length (without chisel): 550mm
• Weight: 10.5kg
76570220
TS 420 350mm Cutquik® Cut-Off Saw
Product Code
Description
Size
Part Number
8461 0211 13
TEX 12PS Pneumatic Pick Hammer
–
76590520
3083 3244 00
Narrow Hex Chisel to Suit TEX 12PS
22 x 82.5mm
76590525
3083 3242 00
Moil Point Hex Chisel to Suit TEX 12PS
22 x 82.5mm
76590530
Chipping Hammer
CH-24
• Straight design is suitable for narrow and deep applications
• Chisel lock retains chisels securely
• High strength piston allows trouble-free operation
• Straight, curved flat and flat chisels available
• Chisel chuck/shank size: 12.7mm2
• Strokes/min: 4,000
• Inlet: 3⁄8” ID
• Weight: 1.7kg
73610112
BISHOPS
BTS 635
• Petrol air-cooled, two-cycle engine
• Unique long-term air filter system
• High torque increases cutting performance
• Comes complete with water kit
• Arbor diameter: 25.4mm
• Max. cutting depth: 128mm
• Displacement: 85.8cm3
• Power output: 4.3kW
• Weight: 11.3kg
Workshop, Machinery & Construction Equipment
TEX 05P Pneumatic Chipping Hammer
4
TS 420
• Compact and robust 3.2kW cut-off saw with a 350mm
cutting wheel for use on all types of jobs
• The innovative long-life air filter system with cyclone
air routing ensures an extremely long filter service
life and increases service intervals
• Can be operated by hand or together with an FW 20 cart
• STIHL 2-MIX engine features an advanced
stratified charge system that boosts power
• Long-life air filter system with cyclone air routing
• Anti-vibration system
• Manual fuel pump
• Decompression valve
• Ergonomic grip position
• Compensator – controller in the carburettor
prevents the fuel-air mixture getting richer
as the air filter becomes clogged
• Cut-off wheel: 350mm
• Displacement: 66.7cc
• Power output: 3.2kW/4.4bhp
• Weight (without fuel
and blade): 9.6kg
76570208
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
129
|
| Back to Contents | Back to Index
4 Cut-Off Saws, Floor Saws, Band Saws & Lighting Towers
Workshop, Machinery & Construction Equipment
TS 800 400mm Cutquik® Cut-Off Saw
Band Saw
TS 800
• Powerful 5.0kW cut-off saw for 400 or 416mm cutting wheels
• Suitable for cutting metal, concrete and asphalt in commercial applications
• Extremely long filter service life and increased service intervals thanks
to innovative long-life air filter system with cyclone air routing
• Can be operated by hand or together with an FW 20 cart
• STIHL 2-MIX engine features an advanced
stratified charge system that boosts power
• Long-life air filter system with cyclone air routing
• Anti-vibration system
• Decompression valve
• Ergonomic grip position
• ElastoStart reduces the shock caused by the
compression of the engine during starting
• Manual fuel pump
• Compensator – controller in the carburettor
prevents the fuel-air mixture getting richer
as the air filter becomes clogged
• Cut-off wheel: 400mm
• Displacement: 98.5cc
• Power output: 5kW/6.7bhp
• Weight: 13kg
• Saw arc tilting 45°
• Automatic switch-off
after cutting
• 3 cutting speeds
• 550W
• 240V
• Frequency: 50Hz
• Cutting capacity at 90°
Round: 110mm
Square: 100 x 150mm
• Cutting capacity at 45°
Round: 100mm
Square: 85 x 65mm
• Blade: 1,640(l) x 0.65(t)mm
• 14tpi
• Includes: Quick lock vice, work light,
stand and coolant system
75510100
Band Saw
•
•
•
•
•
•
•
•
•
•
•
76570210
Concrete Floor Saws
• Whether cutting concrete or asphalt, the reinforced steel box frame
design adds strength necessary to reduce vibrations while sawing
• Minimising vibrations enhances the performance of the
blade and extends the life of the saw
• Super-rigid box frame ensures straight cuts while resisting
warping and vibration--prolongs saw life; extends blade life
• Japanese shaft bearings for long service life
• Comfortable grip handles
• Easy crank for raising/lowering cutting depth
• Hinged front, lift-up blade guard is designed to provide easy blade replacement
• Easy remove, rustless poly water tank provides an optimum flow and volume
of water to the blade
Saw arc tilting 45°
Automatic switch-off after cutting
4 cutting speeds
1,100W
415V
Frequency: 50Hz
Cutting capacity at 90°
Round: 180mm
Square: 180 x 300mm
Cutting capacity at 45°
Round: 110mm
Square: 110 x 180mm
Blade: 2,360(l) x 0.90(t)mm
8tpi
Includes: Quick lock vice
stand and coolant system
75510200
9m Mobile Lighting Tower
• 4 x 1,500W halogen lamps
• Super silenced, single
phase power generator
• 60Hz, 11kVA, 240V
• Kubota D1105-E diesel engine
• 3 cylinder, 1,800rpm
• Fuel tank capacity: 100ltr
• Fuel consumption: 5ltr/hr
• Protection class IP23 and
insulation class H
• Ambient temperature: 40°C
• Dimensions (folded): 2.9(l)
x 1.4(w) x 2.6(h)m
• Dimensions (unfolded): 2.9(l)
x 2.5(w) x 8.0(h)m
Description
MF20-2
130
Part Number
9m Lighting Tower
74090614
Accessories to Suit
Part Number
1,000W Bulb
74090908
1,500W Bulb
74090910
Winch Cable
74090912
Product Code
Description
Blade Size
Part Number
Complete Winch
74090913
MF20-2
188F Petrol Engine
300–350mm
76570250
Projector
74090905
MF14-4
Honda GX160 Petrol Engine
300–350mm
76570260
Glass Lens for Housing
74090907
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Index
A
4
Cleaning – Machines
Compactors
Air Tools
Chipping Hammer........................................................................ 129
Pick Hammer............................................................................... 129
Air Compressors
Diesel........................................................................................... 112
Electric................................................................................. 110, 111
Filters................................................................................... 112, 113
Petrol........................................................................................... 112
Portable....................................................................... 110, 111, 112
Air Filter
Air Compressor............................................................................ 112
Air Receivers
Vertical......................................................................................... 113
Aluminium
Floats........................................................................................... 126
Anvil
Forged......................................................................................... 116
B
Band Saws
Electric......................................................................................... 130
Bench
Lathes.................................................................................. 114, 115
Vices.................................................................................... 118, 119
Benders
Pipe & Tube – Hand Operated.............................................. 116, 117
Pipe & Tube – Hydraulic............................................................... 117
Pipe & Tube – Power Operated............................................ 116, 117
Bracket
Pipe Support Stand..................................................................... 120
Breaker
Demolition.................................................................................... 127
Bricklayers
String Line Reel............................................................................ 122
Builders
Film.............................................................................................. 122
Line.............................................................................................. 122
Bullfloats
Aluminium.................................................................................... 126
C
Plate.................................................................................... 122, 123
Plate - Reversible......................................................................... 123
Compressor – Air
Diesel........................................................................................... 112
Electric................................................................................. 110, 111
Petrol........................................................................................... 112
Concreting
Bullfloat........................................................................................ 126
Cut-Off Saw......................................................................... 129, 130
Floats........................................................................................... 126
Floor Saw.................................................................................... 130
Jointer.......................................................................................... 127
Mixers.................................................................................. 124, 125
Screeds....................................................................................... 126
Vibrator........................................................................................ 125
Construction Equipment
Breakers.............................................................................. 127, 128
Bricklayers String Line Reel.......................................................... 122
Builders Film................................................................................ 122
Chipping Hammer........................................................................ 129
Concrete Mixers................................................................... 124, 125
Concrete Vibrator......................................................................... 125
Cut-Off Saws....................................................................... 129, 130
Demolition Breakers............................................................. 127, 128
Demolition Hammers.................................................................... 128
Drills............................................................................................. 128
Drive Units................................................................................... 125
Drum Rollers................................................................................ 124
Edgers......................................................................................... 127
Floats........................................................................................... 126
Floor Saws................................................................................... 130
Lighting Tower.............................................................................. 130
Plate Compactors................................................................ 122, 123
Rebar Bender/Straightener.......................................................... 116
Screeds....................................................................................... 126
Tamping Rammers............................................................... 123, 124
Trowel Machines.................................................................. 125, 126
Trowels........................................................................................ 127
Vee Jointer................................................................................... 127
Vibratory Rollers........................................................................... 124
Cut-Off Saw
Petrol................................................................................... 129, 130
Cutting Tools
Band Saws.................................................................................. 130
Cut-Off Saws....................................................................... 129, 130
Floor Saw.................................................................................... 130
Chain
D
Chipping
Demolition
Pipe Vice...................................................................................... 120
Hammer – Pneumatic.................................................................. 129
Chisel
For Demolition Breaker................................................................. 127
BISHOPS
Workshop, Machinery & Construction Equipment
Drain Cleaner Kit.......................................................................... 110
Parts Washer....................................................................... 113, 114
Breakers.............................................................................. 127, 128
Breakers – Power Pack................................................................ 127
Hammers..................................................................................... 128
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
i
|
| Back to Contents | Back to Index
Index
4
Workshop, Machinery & Construction Equipment
Diesel
Air Compressors.......................................................................... 112
Concrete Mixers........................................................................... 125
Drive Units................................................................................... 125
Generators........................................................................... 107, 108
Plate Compactor.................................................................. 122, 123
Trash Pumps................................................................................ 110
Water Pumps............................................................................... 109
Drain
Cleaner Kit................................................................................... 110
Drill Press
Vices............................................................................................ 118
Drills
Demolition Breaker Combo.......................................................... 128
G
Generators
Diesel................................................................................... 107, 108
Petrol........................................................................................... 106
Groover
Roll.............................................................................................. 117
H
Drive Units
Hammer
Drum Rollers
Hand
Diesel........................................................................................... 125
Electric......................................................................................... 125
Petrol........................................................................................... 125
Double......................................................................................... 124
Single........................................................................................... 124
Ducting
Chipping – Pneumatic.................................................................. 129
Demolition – Electric..................................................................... 128
Pick – Pneumatic......................................................................... 129
Trowels........................................................................................ 127
Handle
Telescopic.................................................................................... 126
Tube for Ventilator........................................................................ 113
E
Helicopter
Trowel Machine.................................................................... 125, 126
Hydraulic
Edgers
Stainless Steel............................................................................. 127
Electric
Air Compressors.................................................................. 110, 111
Concrete Mixer............................................................................ 124
Drive Units................................................................................... 125
Parts Washer Tank....................................................................... 113
Engineers
Vices............................................................................................ 119
Extractors
Fume Extractor Tube.................................................................... 113
Ventilator...................................................................................... 113
F
Demolition Breakers..................................................................... 127
Pipe Bender................................................................................. 117
Press........................................................................................... 116
J
Jointer
Vee.............................................................................................. 127
L
Lathes
Bench.................................................................................. 114, 115
Fan
Lighting Tower
Film
M
Ventilator...................................................................................... 113
Builders........................................................................................ 122
Filters
Compressor......................................................................... 112, 113
Floats
Aluminium....................................................................................
Bullfloats......................................................................................
Magnesium..................................................................................
Wood...........................................................................................
126
126
126
126
Floor Saws
Concrete...................................................................................... 130
Forged
Anvil............................................................................................. 116
Trailer........................................................................................... 130
Machine Vices
Hand Operated............................................................................ 118
Mechanics
Vices............................................................................................ 120
Metal
Bench Lathe........................................................................ 114, 115
Mixers
Concrete.............................................................................. 124, 125
Fuel Filter
Generators................................................................................... 108
ii
sales@bishopbros.com.pg | www.bishopbros.com.pg
|
| Back to Contents | Back to Index
Index
R
Offset
Rammers
Vices............................................................................................ 119
Oil Filter
Generator.................................................................................... 108
P
Tamping – Diesel.......................................................................... 123
Tamping – Petrol.................................................................. 123, 124
Rebar
Bender......................................................................................... 116
Receiver
Air – Vertical................................................................................. 113
Recoil Starter Assembly
Parts
Pumps......................................................................................... 109
Spare – Air Compressor....................................................... 112, 113
Spare – Generator........................................................................ 108
Spare – Lighting Tower................................................................. 130
Spare – Pumps............................................................................ 109
Parts Washers
Tanks................................................................................... 113, 114
Petrol
Air Compressors.......................................................................... 112
Cut-Off Saw......................................................................... 129, 130
Demolition Breakers..................................................................... 128
Drive Units................................................................................... 125
Floor Saw.................................................................................... 130
Generators................................................................................... 106
Plate Compactor.................................................................. 122, 123
Tamping Rammer......................................................................... 123
Water Pumps............................................................................... 109
Pick
Hammer – Pneumatic.................................................................. 129
Pipe
Benders............................................................................... 116, 117
Stand........................................................................................... 120
Vices............................................................................................ 120
Plastic
Film – Builders............................................................................. 122
Plate
Compactors......................................................................... 122, 123
Compactors - Reversible............................................................. 123
Pneumatic
Chipping Hammers...................................................................... 129
Demolition Breakers............................................................. 127, 128
Pick Hammer............................................................................... 129
Pointed Trowel
Hand............................................................................................ 127
Poker
Concrete Vibrator......................................................................... 125
Portable
Air Compressors.......................................................... 110, 111, 112
Cut-Off Saws............................................................................... 129
Press
Reversible
Plate Compactor.......................................................................... 123
Roll
Groover........................................................................................ 117
Manual......................................................................................... 117
Rollers
Double Drum............................................................................... 124
Vibratory...................................................................................... 124
Rotary Table
Horizontal & Vertical..................................................................... 118
Workshop, Machinery & Construction Equipment
O
4
S
Saws
Band............................................................................................ 130
Cut-Off................................................................................. 129, 130
Floor Saw.................................................................................... 130
Screeds
Concreting................................................................................... 126
Wet.............................................................................................. 126
Sets
Hammer – Air............................................................................... 129
Spare Parts
Air Compressor.................................................................... 112, 113
Generator.................................................................................... 108
Lighting Tower.............................................................................. 130
Pumps......................................................................................... 109
Square – Trowel
Hand............................................................................................ 127
Stainless Steel
Edgers......................................................................................... 127
Vee Jointer................................................................................... 127
Stand
Pipe............................................................................................. 120
With Chain Vice............................................................................ 120
String
Bricklayers Line............................................................................ 122
Hydraulic...................................................................................... 116
Pumps
Submersible.................................................................................
Transfer - Diesel Driven................................................................
Trash............................................................................................
Water - Diesel..............................................................................
Water - Petrol...............................................................................
BISHOPS
110
109
110
109
109
Submersible
Pumps......................................................................................... 110
Pumps – Drive Units..................................................................... 125
Port Moresby | Lae | Madang | Kimbe | Mt Hagen | Kokopo | Honiara
iii
|
| Back to Contents | Back to Index
Index
Workshop, Machinery & Construction Equipment
4
T
W
Tables
Washers
Tamping Rammers
Water Pumps
Rotary.......................................................................................... 118
Diesel........................................................................................... 123
Petrol................................................................................... 123, 124
Telescopic
Handle......................................................................................... 126
Trailer
Air Compressor............................................................................ 112
Lighting Tower.............................................................................. 130
Parts.................................................................................... 113, 114
Diesel...........................................................................................
Petrol...........................................................................................
Recoil Starter Assembly...............................................................
Submersible.................................................................................
Trash............................................................................................
Wet Screed
Concreting................................................................................... 126
Transfer Pumps
Wood
Trash Pumps
Woodworkers
Trowel Machines
Workshop Equipment
Diesel Driven................................................................................ 109
Diesel........................................................................................... 110
Helicopter.................................................................................... 125
Trowels
Hand............................................................................................ 127
Machines............................................................................. 125, 126
Tube
Benders............................................................................... 116, 117
V
Vee Jointer
Floats........................................................................................... 126
Vices............................................................................................ 120
Air Compressors.................................................................. 111, 112
Anvil............................................................................................. 116
Benders............................................................................... 116, 117
Cut-Off Saws....................................................................... 129, 130
Generators........................................................................... 106, 107
Hydraulic Press............................................................................ 116
Lathes.................................................................................. 114, 115
Parts Washers...................................................................... 113, 114
Rotary Table................................................................................. 118
Stand........................................................................................... 120
Ventilator...................................................................................... 113
Vices............................................................................ 118, 119, 120
Stainless Steel............................................................................. 127
Ventilator
Portable....................................................................................... 113
Tube............................................................................................ 113
Vertical
Air Receiver.................................................................................. 113
Vibrators
Concrete...................................................................................... 125
Vibratory Rollers
Double Drum............................................................................... 124
Single Drum................................................................................. 124
Vices
Bench..........................................................................................
Drill Press.....................................................................................
Engineers.....................................................................................
Machine.......................................................................................
Mechanics...................................................................................
Pipe.............................................................................................
Woodworkers..............................................................................
iv
109
109
109
110
110
119
118
119
118
120
120
120
sales@bishopbros.com.pg | www.bishopbros.com.pg