1. No category

CARGO LOADING DOOR AND LOAD LIFT SECURITY
Unit
Transponder reader
Pen lock
Magnetic contacts
System
Transponders
(5 and 6 are not mentioned in the picture)
The LocktransP TLK-02 cargo loading door and load
lift security has been specially developed for parcel
delivery and distribution companies.
Suitable for controlling:
Pen locks, electrical or aircontrolled
Magnetic locks
Cylinders
Ignition
Access control
Universal application
System description
Transponder receiver built in on back and/or side door.
After reading the transponder the driver has 15 seconds to
open the loading, sliding or rolling door.
Automatic locking after ±15 seconds from closing the
loading door.
For each time the loading doors have to be opened the
transponder has to be used.
The transponder keys are impervious to water, dust,
radio signals and magnetic fields.
Your supplier for saving in transport and industry
Advantages
User-friendly.
The loading door or load lift can only be opened with a
transponder and will be locked automatically by closing
the loading door or load lift.
The transponders are secure and maintenance free.
No batteries.
Several combinations of transponders are possible for
example master key and/or unique transponders for every
system.
The system can be combined with vehicle security. The
loading door or load lift can only be opened if the engine
has been stopped and the engine can only be started if
the loading door is locked.
Technical data
Power supply: 24V / 12V
Current consumption (standby): 10 mA
Switch time (default): 15 sec.*
Relay contacts: 10 A
*) Factory setting switch time can be adjusted (5-15 sec.)
STERK TECHNISCH ADVIESBUREAU B.V.
Veersteeg 4 • 4212 LR Spijk (Lingewaal) • Holland
Tel: +31 (0)183 62 41 18 • Fax: +31 (0)183 62 03 27
Internet: www.sterk.com • E-mail: info@sterk.com
CARGO LOADING DOOR AND LOAD LIFT SECURITY
Only when using the right transponder the LocktransP will enable access to operating the
cargo loading door and/or load lift.
Your supplier for saving in transport and industry