CURRICULUM VITAE for MATTHEW R. HALLOWELL

CURRICULUM VITAE
for
MATTHEW R. HALLOWELL
Beavers Endowed Professor of Construction Engineering
Associate Chair
Dept. of Civil, Environmental, and Architectural Engineering
University of Colorado at Boulder
UCB 428
1111 Engineering Drive
Boulder, CO 80309-0428
(303) 492-7994
matthew.hallowell@colorado.edu
ACADEMIC BACKGROUND
Ph.D. (2008)
School of Civil and Construction Engineering, Oregon State University
Construction Engineering and Management Program
Minor: Occupational Safety and Health
Dissertation: A Formal Model of Construction Safety Risk Management
Advisor: Dr. John Gambatese, PE
M.S. (2005)
Department of Civil Engineering, Bucknell University
Thesis: Building Performance Engineering during Construction
Advisor: Dr. T. Michael Toole, PE
B.S. (2004)
Department of Civil Engineering, Bucknell University
PROFESSIONAL EXPERIENCE
Associate Chair for Graduate Education
2014-2015
Dept. of Civil, Environmental, and Architectural Engineering
University of Colorado at Boulder
Beavers Endowed Professor of Construction Engineering
2014-present
Dept. of Civil, Environmental, and Architectural Engineering
University of Colorado at Boulder
Associate Professor
2014-present
(with Tenure)
Dept. of Civil, Environmental, and Architectural Engineering
University of Colorado at Boulder
Associate Professor
2014 – present
(Courtesy Appointment)
Dept. of Environmental and Occupational Health
University of Colorado at Denver
Assistant Professor
2008 – present
Dept. of Civil, Environmental, and Architectural Engineering
University of Colorado at Boulder
CV for Matthew R. Hallowell, Ph.D.
Expert Witness
2009 – present
Updated: 9/2/2014
Case 06 CV 1696: Capital Pacific Homes of Colorado, Inc and Dirk W.
Barr v. Southwest Construction and Trent A. Chappel (Rep: Defense)
Case 09-CR-00389-WYD: United States of America v. Xcel Energy, Public
Service, RPI Coatings, Inc., Phillip Goutagny, and James Thompson (Rep:
Defense)
Case 12CV1329: Meza Construction v. Creative Hardscape Company (Rep:
Plaintiff)
Case 12 CV 1411: Gregory Harms v. Martin Soria and STP Concrete, LLC (Rep:
Defense)
Teaching Assistant
2007 – 2008
School of Civil and Construction Engineering
Oregon State University
Courses: Building Construction Management, Construction Contracts,
Temporary Structural Analysis, Safety and Health Standards and Laws
Research Assistant
2005 – 2008
School of Civil and Construction Engineering
Oregon State University
Topics: Construction Innovation, Alternatives to Liquidated Damages,
Outsourcing Project Delivery, and Quality Assurance
President
2005 – 2008
Modular Design Solutions
Corvallis, OR
President and Lead Engineer
Project Engineer
2004 – 2005
Penn Lyon Homes
Selinsgrove, PA
Structural Engineer
Teaching Assistant
2004 – 2005
Department of Civil Engineering
Bucknell University, Lewisburg, PA
Courses: Engineering project management and timber engineering
Consultant
2004
Small Business Development Center
Bucknell University, Lewisburg, PA
Project: Experimental testing of a structural frame under dynamic loading
Project Engineer
2003
Pine Tree Engineering
Bath, ME
Role: Surveyor, draftsman, and highway designer
Laborer
2002
Fenderson-Howe Master Builders
Falmouth, ME, 2002
Role: Carpenter and demolition laborer
PROFESSIONAL REGISTRATIONS
Fundamentals of Engineering Certificate, Pennsylvania, May, 2004
Eligible to take the Professional Engineering Exam (as of 2011)
Page 2 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
MERIT-BASED AWARDS AND HONORS
Research and Professional Achievement Awards
x Beavers Endowed Professorship of Construction Engineering (2014 to present)
x Construction Research Conference, Best Paper Award (2nd) (2014)
x Engineering News Record (ENR) Mountain States Top 20 Under 40 (2014)
x Faculty Early Career Development (CAREER) Award, National Science Foundation (2013)
x Young Researcher Award, Department of Civil, Environmental, and Architectural Engineering
(2013)
x Beavers Heavy Construction Engineering Endowed Faculty Fellowship (2013 to 2014)
x Best Paper Award, International Council for Research and Innovation and Building Construction
(CIB) W099 Conference (2012)
x ASSE Academic Practice Specialty’s top article of the year and featured in the ASSE Best of the
Best publication for 2011-2012
x Best Paper Award, Engineering Project Organizations Conference (2012)
x Dean’s Performance Award, University of Colorado College of Engineering and Applied Science
(2011)
x Best Paper Award, Construction Research Congress Annual Conference (2005)
x Kiewit Center for Infrastructure and Transportation Fellowship (2007)
x OSU Civil Engineering Graduate Fellowship (2005-2007)
Teaching, Education Research, and Advising Awards
x Best Paper Award, American Society of Engineering Education Annual Conference (2013)
x Outstanding Advisor Award, College of Engineering and Applied Science (2013)
x John and Mercedes Peebles Innovation in Education Award, University of Colorado College of
Engineering and Applied Science (2012)
x Best Technical Publication, Journal of Safety, Health, and Environmental Research (2012)
x Selected to the CU President’s Teaching and Learning Collaborative (2012)
x American Society of Civil Engineering New Faculty Excellence in Teaching Award (2011)
x Selected as an American Society of Civil Engineering ExCEEd Teaching Mentor (2011, 2012)
x Teaching Award, University of Colorado Department of Civil, Architectural, and Environmental
Engineering (2010)
x ASCE ExCEEd Teaching Fellowship (2009)
Service Awards and Advanced Appointments
x Associate Chair for Graduate Education, Department of Civil, Environmental, and Architectural
Engineering (2014-2015)
x Outstanding Reviewer Award, ASCE Journal of Construction Engineering and Management
(2012)
x Outstanding Reviewer Award, ASCE Journal of Construction Engineering and Management
(2011)
x Outstanding Reviewer Award, ASCE Journal of Construction Engineering and Management
(2010)
Page 3 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
PEER-REVIEWED JOURNAL ARTICLES PUBLISHED
* Student
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
† Hallowell’s PhD Advisor
Albert, A.*, Hallowell, M.R., and Kleiner, B. (2014). “Experimental field testing of a real-time
construction hazard identification and transmission technique.” Construction Management and
Economics, Taylor and Francis, 32(10): 1000-1016.
Tixier, A.*, Hallowell, M.R., Albert, A.*, van Boven, L., and Kleiner, B. (2014). “Psychological
antecedents of risk-taking behavior in construction.” Journal of Construction Engineering and
Management, ASCE, 04014052-1 to 04014052-10.
Tran, D.*, Hallowell, M.R., and Molenaar, K.R. (2014). “Construction management challenges
on and best practices for rural transit projects.” Journal of Management in Engineering, ASCE,
04014072-1 to 04014072-10.
Albert, A.*, Hallowell, M.R., Kleiner, B., Golparvar-Fard, M., and Chen, A. (2014). “Enhancing
construction hazard recognition with high fidelity augmented virtuality.” Journal of Construction
Engineering and Management, ASCE, 04014024-1 to 04014024-11.
Hardison, D.*, Behm, M., Hallowell, M.R., and Fonooni, H. (2014). “Identifying construction
supervisor competencies for effective site safety.” Safety Science, Elsevier, 65(1): 45-53.
Hallowell, M.R., Tatum, C., and Rowings, J. (2014) “Findings and path forward: Leveraging
project and career success.” Practice Periodical on Structural Design and Construction, ASCE,
19(1): 142-147.
Albert, A.* and Hallowell, M.R. (2013). “Revamping occupational safety and health training:
Integrating andragogical principles for the adult learner.” Australasian Journal of Construction
Economics and Building, UTS Publishing, 13(3): 128-140.
Albert, A.*, Hallowell, M.R., and Kleiner, B.M. (2013). “Enhancing construction hazard
recognition and communication with energy-based cognitive mnemonics and a safety meeting
maturity model: A multiple baseline study.” Journal of Construction Engineering and
Management, ASCE, 04013042-1 to 04013042-12.
Hallowell, M.R., Hinze, J., Baud, K.*, Wehle, A.* (2013). “Pro-active construction safety
control: Measuring, monitoring, and responding to safety leading indicators.” Journal of
Construction Engineering and Management, ASCE, 139(10): 04013010-1 to 04013010-8.
Hinze, J., Hallowell, M.R., and Baud, K.* (2013). “Construction safety best practices and
relationships to safety performance.” Journal of Construction Engineering and Management,
ASCE, 139(10): 04013006-1 to 04013006-8
Wanberg, J.*, Harper, C.*, Hallowell, M.R., and Rajendran, S. (2013). “Relationship between
construction safety and quality performance.” Journal of Construction Engineering and
Management, ASCE, 139(10): 04013003-1 to 04013003-10.
Alsamadani, R.*, Hallowell, M.R., and Javernick-Will, A. (2013). “Measuring and modeling
safety communication in small work crews in the US using social network analysis.”
Construction Management and Economics, Taylor and Francis, 31(6): 568-579.
Esmaeili, B.* and Hallowell, M.R. (2013). “Integration of safety risk data with highway
construction schedules.” Construction Management and Economics, Taylor and Francis, 31(6):
528-541.
Alsamadani, R.*, Hallowell, M.R., Javernick-Will, A., and Cabello, J.* (2013). “Relationships
among language proficiency, communication patterns, and safety performance in small work
crews in the US.” Journal of Construction Engineering and Management, ASCE, 139(9): 11251134.
Albattah, M.*, Roucheray, M.* and Hallowell, M.R. (2013). “Sustainable buildings: Applying
prevention through design.” Journal of the American Society of Safety Engineers, ASSE,
58(6):76-80.
Albert, A.* and Hallowell, M.R. (2013). “Safety risk assessment for transmission and
Page 4 of 18
CV for Matthew R. Hallowell, Ph.D.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
Updated: 9/2/2014
distribution line work.” Safety Science, Elsevier, 51, 118-126.
Hallowell, M.R., Molenaar, K.R., and Fortunato III, B.R.* (2013). “Enterprise risk management
strategies for state departments of transportation.” Journal of Management in Engineering,
ASCE, 29(2): 114-121.
Toole, T.M., Heckel, P., and Hallowell, M.R. (2013). “Public and organizational policy: A key
factor for enabling prevention through design. Journal of the American Society of Safety
Engineers, ASSE, 58(1): 41-47.
Gambatese, J.A.†, Hallowell, M.R., Renshaw, F., Quinn, M., Heckel, P. (2013). “Prevention
through design research: Understanding and enabling PtD in practice.” Journal of the American
Society of Safety Engineers, ASSE, 58(1): 48-54.
Toole, T.M., Hallowell, M.R., and Chinowsky, P.S. (2013). “A tool for enhancing innovation in
construction organizations.” Engineering Project Organization Journal, Taylor and Francis, 3(1):
32-50.
Curtis, J.A., D’Angelo, D., Hallowell, M.R., Henkel, T.A., and Molenaar, K.R. (2012).
“Transportation agency enterprise risk management.” Transportation Research Record, (Journal
of the Transportation Research Board), National Academies, 2271: 57-65.
Dewlaney, K.S.*, Hallowell, M.R., and Fortunato III, B.R.* (2012). “Safety risk quantification
for high performance sustainable building construction.” Journal of Construction Engineering
and Management, ASCE, 138(8): 964-971.
Esmaeili, B.* and Hallowell, M.R. (2012). “Diffusion of safety innovations in the construction
industry.” Journal of Construction Engineering and Management, ASCE, 138(8): 955-963.
Hallowell, M.R. (2012). “Safety knowledge management in American construction
organizations.” Journal of Management in Engineering, ASCE, 28(2): 203-211.
Fortunato III, B.R.*, Hallowell, M.R., Behm, M., and Dewlaney, K.S.* (2012). “Identification of
safety risks for high performance sustainable construction projects.” Journal of Construction
Engineering and Management, ASCE, 138(4): 499-508.
Dewlaney, K.S.* and Hallowell, M.R. (2012). “Prevention through design and construction
safety management strategies for high performance sustainable building construction.”
Construction Management and Economics, Taylor and Francis, 30(2):165-177.
Hallowell, M.R. and Calhoun, M.E.* (2011). “Interrelationships among highly effective
construction injury prevention strategies.” Journal of Construction Engineering and
Management, ASCE, 137(11): 985-993.
Hallowell, M.R., Esmaeili, B.*, and Chinowsky, P. (2011). “Safety risk interactions among
highway construction work tasks.” Construction Management and Economics, Taylor and
Francis, 29(4): 417-429.
Hallowell, M.R. (2011). “Risk-based economic model for safety investment in construction.”
Journal of Construction Engineering and Management, ASCE, 592-599.
Hallowell, M.R. (2011). “Understanding the link between construction safety and productivity:
An active learning simulation exercise.” Journal of Safety, Health, and Environmental Research,
ASSE, 7(1): 1-9. ***Best Paper Award***
Gambatese, J.A.† and Hallowell, M.R. (2011). “Enabling and measuring innovation in the
construction industry” Construction Management and Economics, Taylor and Francis, 29(6):
553-567.
Gambatese, J.A.† and Hallowell, M.R. (2011). “Factors that influence the development and
diffusion of technical innovations in the construction industry.” Construction Management and
Economics, Taylor and Francis, 29(5): 507-517.
Hallowell, M.R. (2010). “Managing construction worker fatigue on rapid renewal highway
projects.” Journal of the American Society of Safety Engineers, ASSE, 55(12):18-26.
Hallowell, M.R., Protzman, J.B., and Molenaar, K.M. (2010). “Mobile barrier trailer: A critical
analysis of an emerging workzone protection system.” Journal of the American Society of Safety
Engineers, ASSE, 55(10): 31-38.
Page 5 of 18
CV for Matthew R. Hallowell, Ph.D.
35.
36.
37.
38.
39.
40.
41.
42.
Updated: 9/2/2014
Hallowell, M. R. (2010). “Safety risk perception in construction companies in the Pacific
Northwest of the USA.” Construction Management and Economics, Taylor and Francis, 28(4):
403-413.
Hallowell, M.R. (2010). “Cost-effectiveness of construction safety programme elements.”
Construction Management and Economics, Taylor and Francis, 28(1): 25-34.
Hallowell, M.R. and Gambatese, J.A.†(2010). “Population and initial validation of a formal
model for construction safety risk management.” Journal of Construction Engineering and
Management, ASCE, 136(9): 981-990.
Hallowell, M.R. and Gambatese J.A.† (2010). “Qualitative research: application of the Delphi
method to CEM research.” Journal of Construction Engineering and Management, ASCE,
136(1): 99-107.
Hallowell, M. R., Veltri, A., and Johnson, S. (2009). “Safety and lean: One manufacturer’s
lessons learned and best practices.” Journal of the American Society of Safety Engineers, ASSE,
54(11): 22-27.
Hallowell, M.R. and Gambatese J.A.† (2009). “Construction safety risk mitigation.” Journal of
Construction Engineering and Management, ASCE, 135(12): 1316-1323.
Hallowell, M.R. and Gambatese, J.A.† (2009). “Activity-based safety and health risk
quantification for formwork construction.” Journal of Construction Engineering and
Management, ASCE, 135(10): 990-998.
Hallowell, M.R. and Toole, T.M. (2009). “Contemporary design-bid-build model.” Journal of
Construction Engineering and Management, ASCE, 135(6): 540-549.
PEER-REVIEWED JOURNAL ARTICLES ACCEPTED
43.
Albert, A.*, Hallowell, M.R., and Kleiner, B. “Emerging strategies for construction safety and
health hazard recognition.” Journal of Safety, Health, and Environmental Research, ASSE
(accepted)
PEER-REVIEWED JOURNAL ARTICLES SUBMITTED
44.
45.
46.
47.
Albert, A.*, Hallowell, M.R., Lingard, H., and Kleiner, B.K. “Multiple baseline testing: An
experimental method for drawing causal inferences in construction engineering and management
research.” Journal of Construction Engineering and Management, ASCE, (submitted for review).
Harper, C.*, Wanberg, J.*, Hallowell, M.R., and Rajendran, S. “Relationship between design
fidelity and construction safety.” Engineering, Construction, and Architectural Management,
Emerald (submitted for review)
Esmaeili, B.*, Hallowell, M.R., and Rajagopalan, B. “Attribute-based safety risk assessment I:
Analysis at the fundamental level.” Journal of Construction Engineering and Management,
ASCE, (submitted for review).
Esmaeili, B.*, Hallowell, M.R., and Rajagopalan, B. “Attribute-based safety risk assessment II:
Predicting safety outcomes using generalized linear models.” Journal of Construction
Engineering and Management, ASCE, (submitted for review).
BOOKS AND BOOK CHAPTERS
48.
49.
Toole, T.M., Chinowsky, P., and Hallowell, M.R. (2011). “Strategic innovation in EPC” In:
Organizational Management in Construction, Chinowsky, P. and Songer, T. Eds. Taylor and
Francis, pp. 60-75.
Hallowell, M.R. and Hinze, J.W. (2011). “Strategic safety management.” In: Organizational
Management in Construction, Chinowsky, P. and Songer, T. Eds. Taylor and Francis, 154-173.
Page 6 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
PEER-REVIEWED CONFERENCE PROCEEDINGS PUBLISHED
50.
51.
52.
53.
54.
55.
56.
57.
58.
59.
60.
61.
62.
63.
Alex, A.*, Hallowell, M.R., and Kleiner, B. “Energy-based retrieval mnemonics: A new concept
for recognizing and categorizing hazards.” 2014 Working Commission on Safety and Health on
Construction Sites Annual Conference, Lund, Sweden, June 2-3, 2014.
Alex, A*, Hallowell, M.R., and Alsamadani, R.* “Modeling the role of social networks in
situational awareness and hazard communication.” Proceedings of the 2014 Construction
Research Congress, Atlanta, GA, May 19-21, 2014. ***Best Paper Award***
Tixier, A.*, Albert, A. *, and Hallowell, M.R. “Teaching construction hazard recognition
through high fidelity augmented reality and industry-student teams.” Proceedings of the 2013
American Society of Engineering Education Annual Conference – Construction Engineering and
Management Track, Atlanta, GA, June 23-26, 2013. ***Best Paper Award***
Albert, A.* and Hallowell, M.R. “Measuring the effectiveness of pedagogical innovations using
multiple baseline testing.” Proceedings of the 2013 American Society of Engineering Education
Annual Conference – Educational Research Methods Track, Atlanta, GA, June 23-26, 2013.
Esmaeili, B.*, Hallowell, M. R. (2013). “Safety predictive models as a preconstruction safety
management technique.” The 2013 Architectural Engineering Institute (AEI) Conference, the
Pennsylvania State University, April 3-5, 2013.
Esmaeili, B.*, Hallowell, M.R., and Roucheray, M.* (2012) “Developing a framework for
measuring the effectiveness of common fall prevention/protection practices.” 2nd International
Conference on Sustainable Design, Engineering, and Construction, Ft. Worth, TX, November 79, 2012.
Esmaeili, B.* and Hallowell, M.R. (2013). “Multivariate data analysis on struck-by risk
attributes.” Proceedings of the 2012 Working Commission on Safety and Health on Construction
Sites Annual Conference, sponsored by the International Council for Research and Innovation in
Building and Construction, Singapore, September 11-13, 2012.
Albert, A.* and Hallowell, M.R. (2012). “Integrating andragogical learning theory into
occupational safety and health training.” Proceedings of the 2012 Working Commission on
Safety and Health on Construction Sites Annual Conference, sponsored by the International
Council for Research and Innovation in Building and Construction, Singapore, September 11-13,
2012. ***Best Paper Award***
Alsamadani, R.*, Hallowell, M.R., Javernick-Will, A., and Cabello, J.* (2012) “Relationships
among language proficiency, communication patterns, and safety performance in small work
crews in the US.” Proceedings of the Engineering Projects Organizations Conference, EPOS,
Rheden, Netherlands, July 9-12, 2012. ***Best Paper Award***
Albert, A.* and Hallowell, M.R. (2012). “Benchmark of hazard recognition methods in the
construction industry.” Proceedings of the 2012 Construction Research Congress, ASCE, West
Lafayette, IN, May 21-23, 2012.
Esmaeili, B.* and Hallowell, M.R. (2012). “Attribute safety risk model for measuring safety risk
of struck-by accidents.” Proceedings of the 2012 Construction Research Congress, ASCE, West
Lafayette, IN, May 21-23, 2012.
Curtis, J.A., D’Angelo, D., Hallowell, M.R.., Henkel, T.A., and Molenaar, K.R. (2012).
“Transportation agency enterprise risk management.” The Transportation Research Board (TRB)
91st Annual Conference, Washington, D.C., January 22-26, 2012.
Alsamadani, R.* and Hallowell, M.R. (2011). “A method for measuring safety communication in
project networks.” Proceedings of the 2011 Working Commission on Safety and Health on
Construction Sites Annual Conference, sponsored by the International Council for Research and
Innovation in Building and Construction, Washington, D.C. August 24-26, 2011.
Esmaeili, B.* and Hallowell, M.R. (2011). “Using network analyses to model fall hazards on
construction projects.” Proceedings of the 2011 Working Commission on Safety and Health on
Construction Sites Annual Conference, Int’l Council for Research and Innovation in Building and
Page 7 of 18
CV for Matthew R. Hallowell, Ph.D.
64.
65.
66.
67.
68.
69.
70.
71.
72.
73.
74.
75.
76.
77.
78.
Updated: 9/2/2014
Construction, Washington, D.C. August 24-26, 2011.
Esmaeili, B.* and Hallowell, M.R. (2011). “A decision support tool for integrating safety with
project schedules.” Proceedings of the 2011 Working Commission on Safety and Health on
Construction Sites Annual Conference, International Council for Research and Innovation in
Building and Construction, Washington, D.C. August 24-26, 2011.
Hallowell, M.R. (2011). “Prevention through design tool for high performance, sustainable
projects.” Proceedings of the 2011 Working Commission on Safety and Health on Construction
Sites Annual Conference, sponsored by the International Council for Research and Innovation in
Building and Construction, Washington, D.C. August 24-26, 2011.
Antillon, E.I.*, Alarcon, L.F., Hallowell, M.R., and Molenaar, K.R. (2011). “A research
synthesis on the interface between lean construction and safety management.” Proceedings of the
19th Annual Conference of the International Group for Lean Construction, Lima, Peru, July 1315, 2011.
Esmaeili, B.* and Hallowell, M.R. (2011). “Comparative safety risk analysis of highway
construction work tasks.” Proceedings of the 2011 Canadian Society of Civil Engineers’ Annual
Conference, CSCE, Ottawa, OT, Canada, June 14-17, 2011.
Albert, A.* and Hallowell, M.R. (2011). “Factors influencing the decision to de-energize
transmission and distribution lines for electrical contractor safety.” Proceedings of the 2011
Canadian Society of Civil Engineers’ Annual Conference, CSCE, Ottawa, OT, Canada, June 1417, 2011.
Hallowell, M.R., Teizer, J. and Blaney, W.* (2010). “Framework for integrating sensing
technology into traditional safety programs.” Proceedings of the 2010 Construction Research
Congress, ASCE, Banff, AB, Canada, May 8-11, 2010.
Calhoun, M.E.* and Hallowell, M.R. (2010). “Interrelationships among construction safety
program elements: A cross-impact analysis.” Proceedings of the 2010 Construction Research
Congress, ASCE, Banff, AB, Canada, May 8-11, 2010.
Toole, T.M., Chinowsky, P.C., and Hallowell, M.R. (2010). “A tool for improving construction
organizations’ innovation capabilities.” Proceedings of the 2010 Construction Research
Congress, ASCE, Banff, AB, Canada, May 8-11, 2010.
Hallowell, M.R. and Tabata, J.* (2009). “The role of state DOTs in highway construction safety
management.” Proceedings of the 2009 Working Commission on Safety and Health on
Construction Sites Annual Conference, sponsored by the International Council for Research and
Innovation in Building and Construction, Melbourne, Australia, October 21-23, 2009.
Hallowell, M.R. (2009). “A safety and productivity simulation game.” Proceedings of the 2009
Working Commission on Safety and Health on Construction Sites Annual Conference, sponsored
by the International Council for Research and Innovation in Building and Construction,
Melbourne, Australia, October 21-23, 2009.
Hallowell, M.R. (2009). “Application of the Delphi method to construction safety and health
research.” Proceedings of the 2009 Construction Research Congress, ASCE, Seattle, WA., April
5-7, 2009.
Sillars, D.N. and Hallowell, M.R. (2009). “Opinion-based research: lessons learned from four
approaches.” Proceedings of the 2009 Construction Research Congress, ASCE, Seattle, WA.,
April 5-7, 2009.
Hallowell, M.R., Gambatese, J.A.†, and Toole, T.M. (2008). “A systems model of construction
innovation.” Proceedings of the 2008 Conference for Leadership and Management in
Engineering, Lake Tahoe, CA., October 16-19, 2008.
Hallowell, M.R. and Gambatese, J.A.† (2008). “Quantification and communication of
construction safety risk.” 2008 Working Commission on Safety and Health on Construction Sites
Annual Conference, International Council for Research and Innovation in Building and
Construction, Gainesville, FL, March 9-11, 2008.
Hallowell, M. R. and Gambatese, J.A.† (2007). “A formal model of construction safety risk
Page 8 of 18
CV for Matthew R. Hallowell, Ph.D.
79.
80.
81.
Updated: 9/2/2014
management.” 2007 Construction and Building Research Conference (COBRA), sponsored by the
Royal Institution of Chartered Surveyors and Georgia Tech University, Atlanta, GA, Sept. 6-7,
2007.
Hallowell, M.R. and Rogge, D.F. (2007). “Evaluation of outsourcing in the Oregon Department
of Transportation” Proceedings of the 2007 Construction Research Congress, ASCE, Grand
Bahama Island, Bahamas, May 6-8, 2007.
Gambatese, J.A.†, Hallowell, M.R. and Sillars, D.N. (2007). “Benchmark of innovation in the
A/E/C industry” Proceedings of the 2007 Construction Research Congress, ASCE, Grand
Bahama Island, Bahamas, May 6-8, 2007.
Toole, T.M. and Hallowell, M.R. (2005). “Building performance engineering during
construction.” Proceedings of the 2005 Construction Research Congress, ASCE, San Diego, CA,
April 5-7, 2005. ***Best Paper Award***
PEER-REVIEWED CONFERENCE PROCEEDINGS ACCEPTED OR SUBMITTED
82.
83.
84.
85.
Hallowell, M.R. “Combined pedagogy and andragogy: New model for teaching-researchoutreach integration for construction engineering.” American Society of Engineering Educaiton
Annual Conference, Seattle, WA, June 14-17, 2015.
McGuire. T.*, Javernick-Will, A., Hallowell, M.R., Molenaar, K.R. “Identification and control of
strategic risks in highway agencies.” The Transportation Research Board (TRB) 94th Annual
Conference, Washington, D.C., January 11-15, 2012.
Alexander, D.*, Hallowell, M.R., Gambatese, J.A.†, Albert, A.*, and Kleiner, B. “Energy-based
safety risk management.” ISCS15 International Construction Specialty Conference, CSCE,
Vancouver, Canada, June 8-10, 2015. (Submitted for review)
Bhandari, S.* and Hallowell, M.R. “Live safety demos: New methods to enhance situational
awareness and situational interest through emotional engagement.” ISCS15 International
Construction Specialty Conference, CSCE, Vancouver, Canada, June 8-10, 2015. (Submitted for
review)
OTHER PUBLICATIONS
86.
87.
88.
89.
90.
91.
92.
Construction Industry Institute (CII) Research Team 293 (2013). “Strategies for Safety and
Health Hazard Recognition.” Research Summary 293-1, Austin, TX, 2013, Authors: Hallowell,
M.R., Kleiner, B., Albert, A., Duncan, J.
Construction Industry Institute (CII) Research Team 293 (2013). “Strategies for Safety and
Health Hazard Recognition.” Implementation Resource 293-2, Austin, TX, 2013, Authors:
Hallowell, M.R., Kleiner, B., Albert, A., Duncan, J.
Construction Industry Institute (CII) Research Team 293 (2013). “Strategies for Safety and
Health Hazard Recognition.” Research Report 293-3, Austin, TX, 2013, Authors: Hallowell,
M.R., Kleiner, B., Albert, A.
D’Ignazio, J., Hallowell, M.R., and Molenaar, K. R. (2011). Construction Management Practices
for Rural Transit Projects.” Research Report 20(65), National Highway Cooperative Highway
Research Program (NCHRP), Transportation Research Board of the National Academies,
November 2012.
Hallowell, M. R. and Alsamadani, R.* (2012) The impact of language proficiency and age on
positions within small safety networks in the US. CLR News, 3/2012, 37 – 40.
Construction Industry Institute (CII) Research Team 284 (2012). “Active construction safety
leading indicators.” Research Summary 284-1, Austin, TX, 2012, Authors: Hallowell, M.R.,
Hinze, J., Wulf, D. and Trickel, S.
Construction Industry Institute (CII) Research Team 284 (2012). “Active construction safety
Page 9 of 18
CV for Matthew R. Hallowell, Ph.D.
93.
94.
95.
96.
97.
98.
99.
100.
101.
102.
103.
104.
Updated: 9/2/2014
leading indicators.” Implementation Resource 284-2, Austin, TX, 2012, Authors: Hinze, J.,
Hallowell, M.R., Wulf, D. and Trickel, S.
Construction Industry Institute (CII) Research Team 284 (2012). “Active construction safety
leading indicators.” Research Report 284-3, Austin, TX, 2012, Authors: Hinze, J. and Hallowell,
M.R.
D’Ignazio, J., Hallowell, M.R., and Molenaar, K. R. (2011). Executive strategies for risk
management by state departments of transportation.” Research Report 20(24)-74, National
Highway Cooperative Highway Research Program (NCHRP), Transportation Research Board of
the National Academies, May 2011.
Construction Industry Institute (CII) Research Team 243 (2010). “Enhancing innovation in the
EPC industry: Industry Implementation Studies.” Research Summary 243-1, Austin, TX, 2010,
Authors: Chinowsky, P.C., Hallowell, M.R., and Toole, T.M.
Sillars, D.N., Scholz, T., and Hallowell, M.R. (2010). “Analysis of QA procedures at the Oregon
Department of Transportation.” Research Report SPR 650, Oregon Department of Transportation,
June 2010.
Chinowsky, P.C. and Hallowell, M.R. (2009). “Worker safety and the Colorado Department of
Transportation,” Report No. CDOT-2009-12, Colorado Department of Transportation, December
2009.
Sillars, D. N., Hallowell, M.R., Armijos, J.P. (2009). “Development of a decision model for
selection of appropriate timely delivery techniques for highway projects.” Research Report SPR
646, Colorado Department of Transportation, April 2009.
Hallowell, M.R. (2008). “A formal model of construction safety and health risk management.”
Ph.D. Dissertation, Oregon State University, Corvallis, OR.
Gambatese, J.A.† and Hallowell, M.R. (2007). “Energizing Innovation in Integrated Project
Delivery – Final Report” Charles Pankow Foundation and the Foundation for Integrated Services,
August 2007.
Rogge, D.F. and Hallowell, M.R. (2007). “Evaluation of outsourcing in the Oregon Department
of Transportation,” Research Report SPR 617, Oregon Department of Transportation (ODOT)
and U.S. Department of Transportation, Federal Highway Administration (FHWA), July 2007.
Toole, T.M., Hervol, N., and Hallowell, M.R. (2006). “Designing steel for construction worker
safety.” Proceedings of the 2006 North American Steel Construction Conference, NASC, San
Antonio, TX, February 8-11, 2006.
Toole, T. M., Hervol, N., and Hallowell, M.R. (2006). “Designing for construction safety.”
Modern Steel Construction, June 2006: 55-59.
Hallowell, M.R. (2005). “Building performance engineering during construction” Bucknell
University, May 2005. (Masters Thesis)
INVITED SCHOLARLY PRESENTATIONS (WITHOUT PROCEEDINGS)
x
x
x
x
x
“Hazard recognition in construction.” Metodologías avanzadas para la gestión de proyectos de
construcción, International workshop organized by the Catholic University of Chile, Santiago,
Chile, September 10-11, 2014 (1.5 hours; 50 attendees)
“Predicting construction injuries.” Metodologías avanzadas para la gestión de proyectos de
construcción, International workshop organized by the Catholic University of Chile, Santiago,
Chile, September 10-11, 2014 (1 hours; 100 attendees)
“Delphi and experimental research.” Research Methods Course, Colorado State University, Ft.
Collins, CO, April 2, 2014 (1.5 hrs, 10 attendees)
“Situational awareness improvement in construction.” Oregon State University Corporate
Partners Program, Corvallis, OR, March 7, 2014. (1.5 hrs, 40 attendees)
“Finding and path forward.” 2014 Construction Research Conference, Seattle, WA, March 28,
2014 (30 mins, 80 attendees)
Page 10 of 18
CV for Matthew R. Hallowell, Ph.D.
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Updated: 9/2/2014
“Hazard recognition.” CII Performance Improvement Workshop, Houston, TX, October 23, 2013
(1 hour, 40 attendees)
“HSE live demos” ConocoPhillips Global Executives Conference, Houston, TX, September 9,
2013 (30 min, 425 attendees)
“Delphi and experimental research.” Research Methods Course, Colorado State University, Ft.
Collins, CO, March 12, 2013 (1.5 hrs, 10 attendees)
“Advice for graduate school.” Oregon State University School of Civil and Construction
engineering, Corvallis, OR, March 1, 2013 (30 mins; 30 attendees)
“Safety leading indicators.” 11th Annual Southern Company Contractor Safety Forum,
Montgomery, Alabama, March 27, 2012 (1 hour; 300 attendees)
“Emerging hazard identification strategies.” JV Driver Annual Safety Conference, Vancouver
Island, Canada, July 27, 2012 (1 hour; 113 attendees)
“Safety leading indicators.” 2012 Construction Industry Institute Annual Conference,
Implementation Session, Baltimore, MD, July 24, 2012 (1 hour; 180 attendees)
“Safety strategies for outside line work.” NECA District 10 Annual Conference, April 23, 2012
(1 hour, 200 attendees)
“Prevention through design on high performance sustainable buildings.” Mountains and Plains
Education and Research Center’s Annual Conference, March 29, 2012 (20 mins, 70 attendees).
“Justifying the electrical transmission and distribution safety strategies.” National Electrical
Contractor’s Webinar, April 4, 2012 (1 hour, 30 attendees).
“Cost-benefit analysis for T/D line safety strategies.” ELECTRI International Annual Meeting,
Aventura, FL, January 16-17, 2012. (120 attendees; 20 mins)
“Safety risk assessment during design.” Invited research presentation, National Institute for
Occupational Safety and Health PtD Conference, Washington, D.C, August 22, 2011. (45
attendees; 30 mins)
“Safety information modeling for construction” Invited research presentation, Bentley Systems
BE Conference, Philadelphia, PA. May 19, 2010. (35 attendees; 50 mins)
“Proactive safety management for highway infrastructure projects.” Invited research presentation,
Georgia Institute of Technology, June 10, 2009. (10 attendees; 1 hr)
“Proactive construction safety risk management.” First International Conference for
Construction Management, Orlando, FL. February 11, 2009. (20 attendees; 20 mins)
“A Formal Model of Construction Safety Risk Management” 2007 Construction and Building
Research Conference (COBRA), Atlanta, GA, September 6-7, 2007. (30 attendees; 20 mins)
“Evaluation of Outsourcing in the Oregon Department of Transportation” Northwestern Division
of the Army Corps of Engineers Construction Conference, Corvallis, OR, May 3, 2007. (20
attendees; 30 mins)
“Designing Steel for Construction Worker Safety.” North American Steel Conference, San
Antonio, TX, February 8-11, 2006. (60 attendees; 1 hr)
RESEARCH PRESS IN POPULAR MEDIA
x
x
x
x
Engineering News Record “CII research shows potential for safety, productivity gains.” 8/8/2013
by Judy scot.
Building Design and Construction “A closer look at increased construction injury risk in LEED
projects.” 2/12/2012 by Lynn Simnick
Engineering News Record “New research reveals the safety hazards of green building.”
1/27/2012 (reposted in Architectural Record and GreenSource) by Katie Frasier
Engineering News Record “Study: Green construction projects have higher injury rates.”
Page 11 of 18
CV for Matthew R. Hallowell, Ph.D.
x
x
x
x
x
x
Updated: 9/2/2014
12/20/2011 by Katie Frasier
Daily Camera “Green construction poses more dangers, CU study finds.” 12/19/2011 by Brittany
Anas
Hazards Magazine “Green construction’s added ingredient: danger.” International Trade Union
Confederation. 12/16/2011 by Rory Albunas
Plumbing and Mechanical Magazine “Study: Higher safety risks for green construction workers.”
12/1/2011 (reposted in Radiant and Hydronics magazine)
EHS Today “Green construction workers may face additional safety risks.” 11/30/2011
Bloomberg BNA Construction Labor Report “Green building can increase construction workers’
injury risks.” 11/24/2011 by Lauren Walter
Rhode Island Committee on Occupational Safety and Health Magazine “It’s not easy being green:
The hidden costs” Fall/Winter 2012
PROFESSIONAL DEVELOPMENT
x
x
x
x
x
x
x
ASCE ExCEEd Teaching Workshop (Assistant Mentor), Hosted at Florida Gulf Coast University,
Fort Myers, FL June 24-30, 2014.
ASCE ExCEEd Teaching Workshop (Assistant Mentor), Hosted at Florida Gulf Coast University,
Fort Myers, FL June 23-29, 2012.
ASCE ExCEEd Teaching Workshop (Assistant Mentor), Hosted by the University of Texas at
Tyler, Tyler, TX, July 10-15, 2011.
National Science Foundation CAREER Workshop, Hosted by the University of Connecticut,
Hartford, CT, April 3-5, 2011.
ASCE ExCEEd Teaching Workshop (Participant), Hosted by the United States Military
Academy, Westpoint, NY, July 22-27, 2009.
Effective College Teaching Workshop, Richard Felder, Hosted by The University of Colorado at
Boulder, Boulder, CO, Feb 19-21, 2009.
Innovation in Engineering Education, Oregon State University, Corvallis, OR, May 24-25, 2007
EXTERNALLY-FUNDED RESEARCH
Summary of Funded Projects
ID
Start
Year
Project Title
Measuring, predicting, and
improving construction safety by
V
2014
improving hazard signal detection
with augmented virtuality
Using Precursor Analysis to Prevent
U
2014
Low-frequency High-impact Events,
Including Fatalities
Managing Fatigue for Transmission
T
2014
and Distribution Line Workers
Safety risk analysis at the attribute
S
2014
level
Successful implementation of
R
2013
enterprise risk management in state
transportation agencies
Optimizing the Risk and Cost of
Q
2013
Materials QA Programs
Agency
Role
Total
Amount
Hallowell
Share
NSF
PI
$310,000
$209,600
CII
PI
$230,174
$161,787
ELECTRI
PI
$38,000
$38,000
Kiewit
PI
$32,000
$32,000
NCHRP
Co-PI
$87,982
$9,050
NCHRP
Co-PI
$399,970
$50,000
Page 12 of 18
CV for Matthew R. Hallowell, Ph.D.
P
2013
O
2012
N
2012
M
2012
L
2012
K
2012
J
2011
I
2011
H
2011
G
2011
F
2010
E
2010
D
2010
C
2010
B
A
2009
2008
Grant for Completion of Small
Contractor Safety - Calhoun
CAREER: Predictive Modeling of
Construction Injuries in Complex
Environments–Integrated Research,
Teaching, and Outreach Plan
Automation of safety risk analysis
during construction work packaging
President’s teaching and learning
collaborative – Andragogy and
pedagogy
Lifecycle safety risk assessment of
high performance sustainable
buildings
Phase II study on safety
performance at the Colorado DOT
A PtD Tool for High Performance
Sustainable Buildings
Strategies for health, safety, and
environmental hazard recognition
Construction management practices
for rural projects
Designing for safety and health in
green buildings
Safety Information Modeling II
Driving to zero with safety leading
indicators
Cost-benefit of de-energizing line
work
Executive strategies for risk
management by state departments of
transportation
Safety Information Modeling I
Case studies of innovation
Updated: 9/2/2014
ANSEP
PI
$60,000
$60,000
NSF
PI
$400,000
$400,000
Bentley
PI
$52,984
$52,984
U of CO
PI
$1,550
$1,550
NIOSH
PI
$15,000
$15,000
CDOT
CO-PI
$113,697
$30,500
NIOSH
PI
$10,000
$10,000
CII
PI
$265,000
$150,000
NCHRP
PI
$75,000
$52,397
NIOSH
PI
$30,000
$30,000
Bentley
PI
$38,048
$38,048
CII
CO-PI
$197,982
$57,188
ELECTRI
PI
$29,990
$29,990
NCHRP
PI
$50,000
$32,000
Bentley
CII
PI
CO-PI
Total
$27,000
$85,000
$2,549,377
$27,000
$28,333
$1,515,427
Key:
NSF - National Science Foundation
Bentley – Bentley Systems (Private Company)
CDOT – Colorado Department of Transportation
CPWR – Center for Construction Research and Training
CII – Construction Industry Institute
ELECTRI – Electrical Contractors Foundation (ELECTRI International)
NCHRP – National Cooperative Highway Research Program (National Academies)
ANSEP – Alaska Native Science and Engineering Program
NIOSH – National Institute of Occupational Safety and Health
U of CO – University of Colorado
Mentor and Proposal Advisor for Externally-Funded Students
Full PhD Funding, Saudi Arabia Ministry of Higher Education, Mohammed AlBattah (2011)
Page 13 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
Graduate Research Fellowship, National Science Foundation, Matthew Calhoun (2009)
Full PhD Funding, Saudi Arabia Ministry of Higher Education, Rayyan Alsamadani (2009)
TEACHING
Course Evaluations (CU only, scores are based on a 6-pt scale)
Course Title
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
CVEN 3256 – Con equip & meth
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
CVEN 3256 – Con equip & meth
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
CVEN 3256 – Con equip. & meth.
CVEN 3246 - Intro to Con
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
CVEN 3246 - Intro to Con
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
CVEN 3246 - Intro to Con
CVEN 5226 - Quality and Safety
CVEN 3246 - Intro to Con
#
stude
nts
15
34
86
14
17
85
17
16
84
29
23
51
56
14
50
50
10
91
Term
Spr14
Spr14
Fall13
Spr13
Spr13
Fall12
Spr12
Spr12
Fall11
Spr11
Spr11
Fall10
Fall10
Spr10
Fall09
Fall09
Spr09
Fall08
Course
Overall
5.3
5.5
5.3
5.7
5.9
5.1
5.5
5.6
5.4
5.6
5.5
5.5
5.5
5.4
5.3
5.4
5.9
5.2
CEAS College Averages
-08-13
4.7
CEAE Department Averages
-08-13
4.7
*All scores above the 85th percentile in the Dept and College
Instructor
Overall
5.6
5.8
5.7
5.8
5.8
5.3
5.9
5.9
5.7
5.8
5.6
5.8
5.7
5.8
5.8
5.8
5.9
5.6
Instructor
Effectiveness
5.8
5.5
5.5
5.9
5.9
5.4
5.8
5.8
5.6
5.8
5.6
5.8
5.7
5.9
5.6
5.7
6.0
5.3
How
much
learned
5.3
5.5
5.2
5.6
5.6
5.0
5.6
5.6
5.3
5.7
5.3
5.4
5.3
5.3
5.2
5.1
5.9
5.1
4.9
4.9
4.7
4.7
4.8
4.8
STUDENT ADVISING
Current Graduate Student Committees Chaired
Antoine Tixier
PhD “Safety as a natural system”
Erin Arneson
PhDd “Social models for disaster response”
Ulises Techara
PhD “Fatigue management in construction”
Arthur Antoine
PhDc “Alternative project delivery procurement”
Matthew Calhoun
PhDe “Small contractor safety management”
Eric Oechler
MS1,c “Risk-based QA for highway materials”
Jacinto Cabello
MS1
“Language barrier spanners.”
Ivo Yugar-Arias
MS1
“Hispanic worker safety challenges”
1
Marc Prades
MS
“Predicting injuries in industrial projects”
Daniel Hansen
MS1
“Designer hazard recognition”
Matthieu Desvignes
MS1
“Adsorption of safety culture”
Dillon Alexander
MS1
“Precursors of high severity injuries”
Sofia Hafdani
MS1
“Measuring situational awareness”
Expected 2015
Expected 2017
Expected 2017
Expected 2017
Expected 2018
Expected 2015
Expected 2013
Expected 2014
Expected 2014
Expected 2014
Expected 2014
Expected 2016
Expected 2016
Former Graduate Student Committees Chaired
Tim McGuire
MS1,a,b “Enterprise risk management”
Graduated 2014
Page 14 of 18
CV for Matthew R. Hallowell, Ph.D.
Marcos Duarte
Michael Skaggs
Alex Albert
Rayyan Alsamadani
Antoine Tixier
Behzad Esmaeili
Kevin Baud
Marielle Roucheray
Katie Dewlaney
Barney Fortunato
Dennis Riordan
Eric Antillòn
Matthew Calhoun
Sangeeta Pandey
James Tabata
MS1
MS2
PhDd
PhD
MS1
PhDc
MS1
MS2
MS1
MS1
MS2
MS1,a
MS1
MS2
MS2
Updated: 9/2/2014
“Utility of safety investments”
“Testing active leading indicators”
“Hazard recognition”
“Safety social networks”
“Hazard recognition in UG students”
“Attributed-based safety assessment”
“Passive leading indicators for safety”
“PtD tool for worker safety”
“Design for safety and health for LEED”
“LEED and worker safety”
“EM385 impacts on contractor safety”
“Relationship between safety and lean”
“Synergy in safety management”
“Highway maintenance risk”
“DOT safety management”
Graduated 2014
Graduated 2014
Graduated 2013
Graduated 2013
Graduated 2013
Graduated 2012
Graduated 2012
Graduated 2011
Graduated 2011
Graduated 2010
Graduated 2010
Graduated 2010
Graduated 2010
Graduated 2009
Graduated 2008
1
MS thesis option
MS report option
a
Co-Advised with Molenaar
b
Co-Advised with Javernick-Will
c
Assistant Professor, University of Nebraska – Lincoln
d
Assistant Professor, North Carolina State University – Raleigh
e
Indefinite family leave from the program
2
Undergraduate Research Advising
Nathan Stambaugh
2014-15
Josianne Proulx
2014-15
Yuri Andrade
2014
Dillon Alexander
2014
Zachary Noonan
2014
Siddharth Bhadari
2013-14
Spencer Lacy
2013
Carrie Sorenson
2013
Alexander Aguilar
2013
Daniel Hansen
2013
Taylor Curtis
2012
Ryan Decker
2012
Stephen Shattuck
2012
Blake Royal
2012
Taylor Curtis
2012
Stephen Sewell
2012
Elizabeth Snatchko
2012
Similoluwa Ogundipe
2012
Michael Gartman
2011
Marisa Isenhardt
2011
Jodie Ellis
2011
Anthony Renstrom
2011
Benjamin Paskal
2011
Mickey Chianese
2011
Mark Baker
2011
“Fatigue management for high V power line workers”
“Precursors of high severity injuries”
“Photovoice and Hispanic workers”
“HSE Live Demos”
“Integration of risk and work packages”
“HSE live demos”
“Precursors of industrial injuries”
“Predictive analytics for safety”
“Predictive analytics for safety”
“Predictive analytics for safety”
“Risk utility from contractors”
“Construction engineering video learning”
“Patterns in financial risk taking”
“Critical review of OSH methods”
“Measuring the achievement of learning objectives”
“Multimodal education”
“Reliability testing for attributes”
“Reliability testing for attributes”
“Attribute risk analysis”
“Small contractor safety”
“Small contractor safety”
“Attribute risk analysis”
“Safety SNA”
“Safety SNA”
“Attribute risk analysis”
Page 15 of 18
CV for Matthew R. Hallowell, Ph.D.
Jacinto Cabello
Stephanie Hassoldt
Alexa Schaefer
Tyler Lawson
Christopher Denhardt
Todd Leinbach
Shayne Guenther
Faisal Alshallal
Peter Berg
Tyler Bowman
Chris Bouchet
Wes Blaney
2011
2011
2011
2011
2011
2010
2010
2010
2010
2010
2010
2009
Updated: 9/2/2014
“Safety SNA”
“Construction engineering”
“A CEM leveling course”
“Interactive CEM teaching modules”
“Contingent liability model”
“A design for safety tool for LEED”
“Safety leading indicators catalog”
“Trends in safety management”
“Field trip safety”
“Safety knowledge management”
“FACE report analysis”
“Safety technologies”
Graduate Committee Participation (other than primary advisor, thesis/dissertation only)
Jung Kue Choi (MS, graduated)
Wesam Beitelmal (PhD)
Omar Alruwaythi (MS, graduated)
Duncan Nelson (MS, graduated)
Elizabeth Craft (PhD, graduated)
Dave Bonham (MS)
Dylan Hardison, (MS, graduated)
Valerie Carrasco (MS, graduated)
Maryam Sanaei (MS, graduated)
Jake Tonnesson (MS, graduated)
Ted Howard (MS, graduated)
John Wanberg (PhD, graduated)
James O’Brien (PhD, graduated)
Liron Yovel (PhD, abandoned)
McCullough Crawford (MS, graduated)
Pierre Bennier (MS, graduated)
Chris Sinesi (MS, graduated)
Carl Chase (MS, graduated)
Paul Arnold (MS, graduated)
Yongwei Shan (PhD, graduated)
Desiderio Navarro (MS, graduated)
Marie Louis (PhD, unsuccessful)
Craig Wilson (MS, graduated)
Dan Tran (PhD, graduated)
Spencer Won (PhD, graduated)
Nathanial Sobin (PhD, graduated)
Dorothy Gliezel (MS, graduated)
STUDENT ADVISEE AWARDS
Alex Albert, Conference of the CIB W099 Working Group on Construction Safety and Health Best Paper
Award (2012)
Rayyan Alsamadani, Engineering Project Organization Conference Best Paper Award (2012)
Behzad Esmaeili, Construction Research Council’s 2nd Place Student Poster Competition (2012)
Matthew Calhoun, Construction Research Council’s 2nd Place Student Poster Competition (2011)
Matthew Calhoun, National Science Foundation Graduate Research Fellowship (2009)
PROFESSIONAL AND HONORARY SOCIETY MEMBERSHIPS
Member, The Beavers, 2014 -present
Associate Member, American Society of Civil Engineers (ASCE), 2004 – present
Professional Member, American Society of Safety Engineers (ASSE), 2005 – present
Chi Epsilon, Oregon State University Chapter. Member, 2007 – present
SERVICE ACTIVITIES
Proposal Panel Reviews
National Science Foundation, CMMI, CIS 2014 CAREER, October 2014 ~20 proposals reviewed
National Science Foundation, CMMI, CIS, Standard Cycle, April 2014, ~20 proposals reviewed
Page 16 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
NIOSH Mountains and Plains Education and Research Center, April 2014, ~20 proposals reviewed
NIOSH Mountains and Plains Education and Research Center, April 2013, ~20 proposals reviewed
Peer-reviewer (Journals):
Smart and Sustainable Built Environment (2012-present)
Automation in Construction (2012-present)
Engineering Project Organizations (2012-present)
Journal of Infrastructure Systems (2010- present)
Journal of Management in Engineering (2011-present)
Journal of Safety, Health, and Environmental Research (2010-present)
Journal of Computing in Civil Engineering (2010-present)
Professional Safety, Journal of the American Society of Safety Engineers (2009-present)
Journal of Urban Planning and Development (2009-present)
Journal of Construction Engineering and Management (2008-present)
Journal of Construction Management and Economics, Taylor and Francis, (2008-present)
Peer-reviewer (Conferences):
Track Chair for Safety and Risk, 2014 Construction Research Congress, May 19-21, 2014
Engineering Project Organization Conference, Netherlands, July 2012
ASCE Construction Research Congress (CRC) Bi-annual Conference, West Lafayette, IN, May 21-23,
2012.
CIB W-99 International Conference Melbourne, Australia, October 21-23, 2009
ASCE Construction Research Congress (CRC) Bi-annual Conference, Seattle, WA, April 5-7, 2009
CIB W-99 International Conference Melbourne, Australia, October 21-23, 2009
ASCE Construction Research Congress (CRC) Bi-annual Conference, West Lafayette, IN, May 2012.
Conference Sessions Chaired and Technical Committees:
2012 Engineering Project Organizations Conference, Technical Committee
2012 CIB W-099 Working Group on Safety and Health in Construction, Singapore (1 session)
2012 Construction Research Congress, West Lafayette, IN (1 session)
2011 CSCE Construction Track, Ottawa, Canada, (2 sessions)
2009 ASCE Construction Research Congress, Seattle, WA (2 sessions)
2009 CIB W-099 Working Group on Safety and Health in Construction, Melbourne, Australia (1 session)
Committee participation (National):
National Academy of Engineering, Frontiers of Engineering Education
ENR Best Project Selection Committee
Academic Leader and Administrator, Construction Industry Institute Safety Community of Practice
ASSE Construction Practice Specialty
ASCE Prevention through Design (PtD) Committee
ASCE Site Safety Committee
ASCE Construction Research Council
Scientific and Technical Committee of CIB-W99
CIB W099 Working Group on Construction Safety and Health
ASSE Technical Advisory Committee (2008 to 2010 term)
Committee participation (Department, College, or University):
Member, Graduate Education Council, College of Engineering and Applied Science, University of
Colorado (2014-2015)
Study Abroad Advisor, Department of Civil, Environmental, and Architectural Engineering, University of
Colorado (2012-2013)
Page 17 of 18
CV for Matthew R. Hallowell, Ph.D.
Updated: 9/2/2014
Honors Program Advisor, Department of Civil, Environmental, and Architectural Engineering, University
of Colorado (2012-2013)
Chair, Construction Engineering and Management Tenure/Tenure Track Search Committee, Department
of Civil, Environmental, and Architectural Engineering, University of Colorado (2011-2012)
Construction Engineering and Management Senior Instructor Search Committee, Department of Civil,
Environmental, and Architectural Engineering, University of Colorado (2011)
Curriculum Committee, Department of Civil, Environmental, and Architectural Engineering, University
of Colorado (2010-2011)
Computing Committee, Department of Civil, Environmental, and Architectural Engineering, University
of Colorado (2010-2011)
Building Systems Program Faculty Search Committee, Department of Civil, Environmental, and
Architectural Engineering, University of Colorado (2010-2011)
Graduate Committee, Department of Civil, Environmental, and Architectural Engineering, University of
Colorado (2008-2010; 2013-2014)
Other (Fun Stuff):
XTerra Triathlon Mountain Champion and National Championship Qualifier (2011)
President, OSU Triathlon Club, Oregon State University (2006-2007)
Captain, Bucknell University Division I Men’s Swimming and Diving Team (2003-2004)
Page 18 of 18