Technical Data Phonak Audéo V-10 (V90/V70/V50/V30) (xS) Receiver-In-Canal (RIC) instrument with size 10A battery (for fitting range, product details and available options, please see the Product Information or visit www.phonakpro.com) RIC instruments can be fitted with a Standard or Power external receiver (xReceiver). The Standard xReceiver (xS) is for mild to moderately severe hearing loss. Unless otherwise specified, all data obtained are measured in a closed configuration with a coupling disc onto a HA-1 coupler (ANSI-S3.7-1995) or an occluded ear simulator (EN 60711, coupling arrangement according to fig. 4 in the test standard), and in the Phonak Target measurement settings. Using pure tone measurements with a digital hearing instrument can result in a wavy frequency response. This is an artifact resulting from the use of a narrowband input signal and does not affect the actual performance with naturally occurring broadband input signals. 2cm3 coupler data ANSI S3.22-2009 Output sound pressure level Nominal 111 dB SPL Ear simulator data dB SPL 130 EN / IEC 60118 and IEC 60711 120 Maximum 114 dB SPL HFA 106 dB SPL Full-on gain (Input 90 dB SPL) 110 Output sound pressure level 100 90 1600 Hz 113 dB SPL 80 100 dB SPL 130 Full-on gain (Input 90 dB SPL) 120 dB 60 90 10000 Acoustic gain 110 100 1000 Maximum 46 dB HFA 37 dB RTG 29 dB Full-on gain (Input 50 dB SPL) 50 80 100 1000 30 Acoustic gain Maximum 56 dB Reference test gain (Input 60 dB SPL) 40 10000 20 1600 Hz 45 dB RTG 38 dB 10 100 dB 60 Full-on gain (Input 50 dB SPL) 50 Reference test gain (Input 60 dB SPL) 40 1000 10000 Frequency range <100 Hz - 8800 Hz Total harmonic distortion 500 Hz 1.5% Battery current Quiescent Working 1.1 mA 1.2 mA Equivalent input noise level 19 dB SPL 30 20 10 100 1000 10000 Frequency range <100 Hz - 9200 Hz Total harmonic distortion 500 Hz 1.5% Battery current Quiescent Working 1.1 mA 1.2 mA Equivalent input noise level 19 dB SPL 800 Hz 2% 1600 Hz 2.5% 1600 Hz 2% Dynamic data Compression Attack time Recovery time 10 ms 50 ms Input / Output characteristics at 2000 Hz Dynamic data Compression 800 Hz 2% Attack time Recovery time 10 ms 50 ms P out dB SPL 110 Full-on gain 100 Reference test gain 90 80 70 60 30 40 50 60 70 80 90 100 P in dB SPL V1.00/2014-06/DHO © Phonak AG All rights reserved/page 1/2 Maximum 122 dB SPL Technical Data Phonak Audéo V-10 (V90/V70/V50/V30) (xP) The Power xReceiver (xP) is for mild to severe hearing loss. Ear simulator data 2cm3 coupler data EN / IEC 60118 and IEC 60711 ANSI S3.22-2009 Output sound pressure level Output sound pressure level Maximum 132 dB SPL 1600 Hz 131 dB SPL Nominal 124 dB SPL dB SPL 140 Full-on gain (Input 90 dB SPL) 130 HFA 120 dB SPL Full-on gain (Input 90 dB SPL) 130 120 120 110 110 100 100 90 Maximum 127 dB SPL dB SPL 140 90 100 1000 10000 100 Acoustic gain Maximum 65 dB 1000 10000 Acoustic gain 1600 Hz 62 dB RTG 53 dB dB 70 Full-on gain (Input 50 dB SPL) 60 Reference test gain (Input 60 dB SPL) 50 dB 70 Maximum 57 dB HFA 52 dB RTG 43 dB Full-on gain (Input 50 dB SPL) 60 Reference test gain (Input 60 dB SPL) 50 40 40 30 30 20 20 1000 100 10000 Frequency range <100 Hz - 6400 Hz Total harmonic distortion 500 Hz 1.5% Battery current Equivalent input noise level 10000 <100 Hz - 6600 Hz Total harmonic distortion 500 Hz 1% Quiescent Working 1.1 mA 1.2 mA Battery current Quiescent Working 1.1 mA 1.2 mA 19 dB SPL Equivalent input noise level 19 dB SPL 800 Hz 1.5% 1600 Hz 1.5% Dynamic data Compression 1000 Frequency range 800 Hz 1% 1600 Hz 1% Dynamic data Attack time Recovery time 10 ms 50 ms Compression Attack time Recovery time 10 ms 50 ms Input / Output characteristics at 2000 Hz P out dB SPL 130 Full-on gain 120 Reference test gain 110 100 90 80 30 40 50 60 70 80 90 100 P in dB SPL V1.00/2014-06/DHO © Phonak AG All rights reserved/page 2/2 100