Download Report

Wirepas Pino™
Cloud
Wirepas Pino is a licensable wireless multi-hop mesh
protocol stack for Internet of Things (IoT), Machine to
Machine communication (M2M), and Wireless Sensor
and Actuators Networks (WSAN).
Pino is designed to answer all IoT requirements with excellent energy-efficiency,
scalability, and uncompromised robustness. Cross-layer optimization finalizes the
superior performance. Pino is implemented fully in SW giving the benefit of being
HW independent. Thus, best fitting MCUs and radios can be chosen for every
application.
Cluster
Headnode
(router)
Subnode
The operation of Pino is fully autonomous, no external nor centralized control is
required and the protocol intelligence is distributed in the network. The benefits of
Pino are build to every layer of the stack.
Wirepas Pino™ Mesh Protocol Stack
Fully automatic operation Ultra low power, even routers
can be battery-powered
Applications
Pino Mesh API
Extreme robustness
Limitless scalability
Pino Application Support
HW independence
Smart metering
Smart grid
Smart cities
Traffic control
Telemetry
Wireless sensors
Environmental
sensors
Health monitors
Security
OTAP
Diagnostics
Delay calculation
Buffering
Pino Routing
Example applications
Industrial
measurements
& control
Home automation
& security
Wireless lighting
control
Waste management
Pino Support
Pino MAC
Pino HAL
2.4 GHz PHY
Sub-GHz PHY
Pino™ Mesh Stack Components
Pino Application
Support
Easy-to-use API for
using the stack service
Pino MAC
Time-slotted multichannel medium
access using accurate
local synchronization
Pino Routing
Cost-based multi-hop
routing with different
QoS options and load
balancing
Pino Support
Security for compromise-free communication
OTAP firmware updates for future-proof operation
Extensive network diagnostics for monitoring network
operation
Delay calculator for accurate timing of events
Buffering for enhanced reliability
PRODUCT DEVELOPMENT AND REFRENCE DESIGNS
Reference designs are available for both 2.4GHz (Nordic nRF51822 ) and Sub-Ghz (Silicon labs EFM32LG+Si446x). More platforms
will be released in Q1/2015. Evaluation kits are available for selected customers. Kit includes graphical diagnostics tool which is very
useful to understand the network behavior in different environmental conditions and shows simple way the strengths of the links
between the nodes. Terminal application is also included allowing to make some simple applications.
Wirepas - Intelligent IoT Networks
email: info@wirepas.com What makes Wirepas Pino™ different?
Wirepas Pino™ network manager, in each node, at
network level. In addition, Pino™ provides diagnostic
channel from the network for monitoring
App
Typical central network
manager, in the cloud or
one device in the network
Gateway
App
Back End
Mesh
Stack
Mesh
Stack
IP
Stack
PHY
PHY
PHY
Diagnostics Back
End
IP Stack
PHY
Application data
Diagnostics data
Mesh
node
Internet connection
Mesh gateway
Wirepas Mesh Network
RF environment is dynamic.
Interference and congestions are
local by nature.
Distributed system adapts locally
and makes better decisions for the
network.
Wirepas - Intelligent IoT Networks
Local decision making enables
better channel control and fast
adaptability to mobility, loss of
node or link breakage.
Cloud
Cloud/Server
Central control is always a possible
bottleneck and single point of
failure.
Distributed operation does not
require end-to-end messaging
overhead.
email: info@wirepas.com