Piston rod cylinder ► Mini cylinder Series SWN Brochure 2 Piston rod cylinder ► Mini cylinder Series SWN Screw-in cylinder, Series SWN ► Ø 6 - 16 mm ► Single-acting, retracted without pressure 3 Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change 3 Piston rod cylinder ► Mini cylinder Screw-in cylinder, Series SWN ► Ø 6 - 16 mm ► Single-acting, retracted without pressure 00106502 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -20°C / +80°C Medium temperature min./max. -20°C / +80°C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces 6 bar Materials: a68 Cylinder tube Aluminum, anodized Piston rod Stainless steel Front cover Polyoxymethylene Nut for piston rod Steel, galvanized Technical Remarks ■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C. ■ The oil content of compressed air must remain constant during the life cycle. ■ Use only the approved oils from AVENTICS, see chapter „Technical information“. ■ Please see the table of dimensions for information on the spring forces. Piston Ø Extracting piston force [mm] [N] Piston Ø Weight [kg] 6 15 10 38 16 100 Stroke 5 6 10 16 0822406900 0822406910 0822406920 10 0822406901 0822406911 0822406921 15 0822406902 0822406912 0822406922 Piston Ø Stroke 5 6 0.01 10 16 0.018 0.04 10 0.01 0.02 0.043 15 0.011 0.022 0.046 Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change 4 Piston rod cylinder ► Mini cylinder Screw-in cylinder, Series SWN ► Ø 6 - 16 mm ► Single-acting, retracted without pressure Dimensions EE KK DE -f8 BE KW MM -f7 KY SW1 L4 WH BF+S L3 SW2 WF+S A SW3 ZB+S 00106504 S = stroke Piston Ø S A 7 M10x1 BE BF DE 1) F 2) F 3) EE KK KW KY L3 6 2.5 6 10 7 M10x1 9.5 7.6 1.7 3 M5 M3 3.5 1.8 6 2.5 6 15 7 M10x1 9.5 7.6 1.5 3 M5 M3 3.5 1.8 6 2.5 10 5 10 M16x1,5 8.5 12 6.1 6.1 M5 M4 4 2.2 7 3 10 10 10 M16x1,5 8.5 12 5.3 6.1 M5 M4 4 2.2 7 3 10 15 10 M16x1,5 8.5 12 4.3 6.1 M5 M4 4 2.2 7 3 16 5 12 M22x1,5 12 18.5 13 15.5 M5 M5 5 2.7 7 3.5 16 10 12 M22x1,5 12 18.5 10.5 15.5 M5 M5 5 2.7 7 3.5 16 15 12 M22x1,5 12 18.5 8 15.5 M5 M5 5 2.7 7 3.5 6 5 7.5 7.6 1.9 3.9 Piston Ø MM SW1 SW2 SW3 WF ±0,2 WH ZB 6 3.5 5.5 9 13 15.5 1.5 17 6 3.5 5.5 9 13 15.5 1.5 17 10 5 7 13 19 15.5 2 17.5 10 5 7 13 19 15.5 2 17.5 10 5 7 13 19 15.5 2 17.5 16 6 8 19 27 18.5 2 20.5 16 6 8 19 27 18.5 2 20.5 16 6 8 19 27 18.5 2 20.5 6 3.5 5.5 1) Recommended receiving bore DE 2) Spring force [N] min. 3) Spring force [N] max. 9 13 13.5 1.5 M5 M3 3.5 1.8 L4 15 h7 Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2014-10-17, ©AVENTICS S.a.r.l., subject to change Aventics GmbH Ulmer Straße 4 30880 Laatzen Phone +49 511 2136-0 Fax +49 511 2136-269 www.aventics.com info@aventics.com Find more contact information at www.aventics.com/contact Only use the AVENTICS products shown in industrial applications. Read the product documentation completely and carefully before using the product. Observe the applicable regulations and laws of the respective country. When integrating the product into applications, note the system manufacturer’s specifications for safe use of the product. The data specified only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that the products are subject to a natural process of wear and aging. 17-10-2014 An example configuration is depicted on the title page. The delivered product may thus vary from that in the illustration. Subject to change. © AVENTICS S.à.r.l.. This document, as well as the data, specifications and other information set forth in it, are the exclusive property of AVENTICS S.a.r.l.. It may not be reproduced or given to third parties without its consent. PDF online