Rev. 062015 FESTIVO BUFFET LINE DISPENSER UNITS – BLH, BLL Technical information: BLH-45-PH-28, BLL-45-PH-28, BLH-45-PN-28, BLL-45-PN-28, BLH-45PH-32, BLL-45-PH-32, BLH-45-PN-32, BLL-45-PN-32 Festivo Buffet Line plate dispenser can be obtained in heated (PH) or neutral (PN) model. The plate cylinders can be adjusted with guide rods: diameter of model 28 between 220…280 mm, and model 32 between 280…320 mm. The cylinder lifting force can be adjusted by adding or removing the springs. The heated plate dispenser has a power switch and thermostat. The top plates and tray slides are made of stainless steel. The unit body is laminate and standard colours are from the Formica Iki collection. Colours listed in the table below are found easiest in www.formica.com. Other colours on agreement. Cylinder springs. Power switch and thermostat. TEMPERATURE VOLTAGE RANGE MALLI SUPPLY FUSE DIMENSION A DIMENSION B CUBAGE POWER °C VAC kW A hidas ...+60 230 1~50 1,4 10 mm BLH-45-PH-28 BLL-45-PH-28 Adjustment of the plate guides. PACKAGE SIZE (package) mm m³ length x width x height mm 900 - 0,5 550 x 850 x 1050 750 - 0,4 550 x 850 x 900 550 x 850 x 1050 900 - 0,5 BLL-45-PN-28 750 - 0,4 550 x 850 x 900 BLH-45-PH-32 900 - 0,5 550 x 850 x 1050 BLH-45-PN-28 - ...+60 - - 230 1~50 0,7 - 10 BLL-45-PH-32 750 - 0,4 550 x 850 x 900 BLH-45-PN-32 900 - 0,5 550 x 850 x 1050 750 - 0,4 550 x 850 x 900 - - - - BLL-45-PN-32 Standard colors Formica Iki: K7021 K7024 F7927 F7961 F2255 F2253 $ 9LUWDMRKWR 9LUWDMRKWR Power cord Power cord VIVID CHERRY, CHERRY BIRCH, BIRCH FOLKESTONE, GREY FOG, GREY POLAR WHITE, WHITE MATT DIAMOND BLACK, BLACK MATT Suomen Kotikylmiö Oy Ravitie 3 FIN-15860 HOLLOLA Tel (03) 553 8600 Fax (03) 553 8668 festivo@festivo.fi www.festivo.fi Rev. 062015 FESTIVO BUFFET LINE DROP-IN - BLDI Technical information: BLDI-PH-28, BLDI-PN-28, BLDI-PH-32, BLDI-PN-32 Festivo Drop-in plate dispensers are serving units installable into the fixed furniture of the restaurant. The PH model has a heating element and thermostat. The PN model is neutral without heating. The heated plate dispenser has a power switch and thermostat. The thermostat/switch box can be installed at a 0.5 m distance from the unit. The plate cylinders can be adjusted with guide rods: diameter of model 28 between 220…280 mm, and model 32 between 280…320 mm. The cylinder lifting force can be adjusted by adding or removing the springs. Adjustment of the plate guides. The top plates and tray slides are made of stainless steel. BLDI-PN-28 TEMP. VOLTAGE RANGE MODEL BLDI-PH-28 SUPPLY FUSE POWER °C VAC kW A Slow ...+60 230 1~50 0,7 10 Cylinder springs. DIM. DIM. DIM. DIM. INSTALLATION CUBAGE A B C D CUT-OUT E X F (package) PACKAGE SIZE mm Ø mm Ø mm mm mm mm m³ length x width x height - - - 0,5 550 x 850 x 1050 285 BLDI-PN-28 - - - - BLDI-PH-32 ...+60 230 1~50 0,7 10 - - BLDI-PN-32 - - - - - - - 0,4 550 x 850 x 900 - - 0,5 550 x 850 x 1050 - - 0,4 550 x 850 x 900 385 x 435 328 0 ) ( $ % Suomen Kotikylmiö Oy ', Ravitie 3 FIN-15860 HOLLOLA Tel (03) 553 8600 Fax (03) 553 8668 festivo@festivo.fi www.festivo.fi
© Copyright 2025