1. No category

4000 Series
active loudspeakers
Presson ©
Compact and powerful
Genelec 4010A, 4020B, 4030B and 4040A are compact
but powerful two-way active loudspeakers designed for
indoor commercial and professional installations. All
models contain an integrated amplification unit comprising
an active electronic crossover, overload protection circuitry
and two power amplifiers, one for each driver.
Designing the power amplifiers, active crossover, drivers
and loudspeaker enclosure as one integrated unit presents
a number of benefits:
•Excellent sound quality due to exact matching of the
crossover, amplifiers and drivers.
•High sound pressure capability despite a small enclosure.
•Reliable overload protection circuitry for the amplifiers
and drivers.
•Precise Room Response Controls for optimising the
loudspeaker’s response to suit different acoustical
environments.
•No need for external power amplifiers.
•Balanced 10 kOhm line level audio input for easy and
interference-resistant cabling.
4000 Series active loudspeakers for AV install
3
Active
in professional
installations
Aluminium enclosure
All Genelec 4000 Series designs incorporate
the innovative die-cast aluminium Minimum
Diffraction Enclosure™ (MDE™) which features
a relatively large internal volume, softly rounded
edges and outstanding mechanical strength. As
a result, the imaging accuracy and low frequency
extension with such a compact enclosure are
truly astounding. The enclosure design also
incorporates the advanced Directivity Control
Waveguide™ (DCW™) for the tweeter, providing
an amazingly smooth on and off axis response
and a long, curved reflex port ending in a wide
flare for excellent bass articulation. Both drivers
are protected by sturdy metal grilles.
Integrated support
The integrated support points for Omnimount
and/or König & Meyer mounting hardware on the
enclosure back panel and a threaded hole at the
base of the enclosure provide versatile mounting
options for all installations. A wall mount bracket is
included in the loudspeaker package, with a wide
range of accessories available from your local
Genelec dealer or the Genelec WebShop.
Controls and Power
Management
Calibrated Bass Tilt, Treble Tilt and Bass RollOff controls allow matching the 4000 Series
loudspeakers to any acoustic environment. Power
management is by 12 V trigger voltage or signal
sensing Autostart function. Power consumption in
Standby mode is less than 0.5 Watts.
INTELLIGENT SIGNAL SENSING
POWER MANAGEMENT
Significant reduction of power
consumption in Standby mode
Presson ©
4010A
115 mm [4 1/2"]
121 mm [4 3/4"]
Center of gravity
63 mm [2 1/2"]
292-4010S
ON
ISS DISABLE
SENSITIVITY -10 dB
TREBLE TILT +2 dB
BASS TILT -2 dB
BASS TILT -4 dB
MAINS INPUT
50 / 60 Hz 30 W
100 - 240 V~
+
-
GND
710127
This device complies with FCC Part 15 and Canadian ICES-003 radio frequency Class B
emission requirements. Refer to operating manual for full information.
Genelec Oy 4010
292-4010T
4010A ACTIVE
SPEAKER SYSTEM
MADE IN FINLAND www.genelec.com
Acoustic axis
107 mm [4 3/16”]
292-6010W
AVERTISSEMENT
Center of gravity
84 mm [3 5/16”]
181 mm [7 1/8”]
WARNING
ELECTRIC SHOCK HAZARD. DO NOT OPEN. DO NOT SUBJECT
TO WATER OR MOISTURE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR. NE PAS
EXPOSER À L'EAU OU L'HUMIDITÉ. AUCUN COMPOSANT À
L'INTÉRIEUR REMPLAÇABLE PAR L'UTILISATEUR. ADRESSER
TOUTE RÉPARATION À UN PERSONNEL QUALIFIÉ.
(dBr) vs freq (Hz) 10 Jan 13
Genelec Oy 4010
90
d
B 85
r
90
d
B 85
r
A 80
A 80
75
75
(dBr) vs freq (Hz) 10 Jan 13
0° 15°
85
30°
70
BASS TILT
45°
80
60°
65
75
70
TREBLE TILT
70
65
40
70 100
200
500
1k
2k
5k
10k
40
20k Hz
The effect of the Bass Tilt and Treble Tilt controls on the free
field response.
70 100
200
500
1k
4010A
Frequency of > 150 deg dispersion (Hz)
Horizontal
Vertical
130
110
5k
10k
20k Hz
The curves above show the horizontal directivity characteristics
of the loudspeaker. The lower curve shows the loudspeaker’s
power response.
Horizontal and vertical directivity plot
Dispersion angle (degrees)
2k
2000
4020B
Genelec Oy 4020
(dBr) vs freq (Hz) 7 Nov 12
Genelec Oy 4020
90
d
B 85
r
90
d
B 85
r
A 80
A 80
TREBLE TILT
75
(dBr) vs freq (Hz) 7 Nov 12
0° 15° 30°
75
BASS TILT
85
70
45°
80
60°
65
75
BASS ROLL-OFF
70
40
70 100
200
500
1k
2k
5k
10k
40
20k Hz
The effect of the Bass Tilt, Bass Roll-Off and Treble Tilt controls
on the free field response.
70 100
200
500
1k
2k
5k
10k
20k Hz
The curves above show the horizontal directivity characteristics
of the loudspeaker. The lower curve shows the loudspeaker’s
power response.
Horizontal and vertical directivity plot
4020B
Dispersion angle (degrees)
Frequency of > 150 deg dispersion (Hz)
Horizontal
Vertical
120
100
4000 Series active loudspeakers for AV install
1500
7
4030B
Genelec Oy 4030
(dBr) vs freq (Hz) 7 Nov 12
Genelec Oy 4030
95
d
B 90
r
(dBr) vs freq (Hz) 7 Nov 12
100
95
A 85
TREBLE TILT
80
BASS TILT
90
d
B
r
A
90
0° 15° 30°
85
80
85
75
80
100 70
45°
60°
BASS ROLL-OFF
75
95 65
90 60
55
30
50
100
200
500
1k
2k
5k
10k
50
30
20k Hz
The effect of the Bass Tilt, Bass Roll-Off and Treble Tilt controls
on the free field response.
50
100
200
500
4030B
Frequency of > 150 deg dispersion (Hz)
Horizontal
Vertical
120
100
2k
5k
10k
20k Hz
The curves above show the horizontal directivity characteristics
of the loudspeaker. The lower curve shows the loudspeaker’s
power response.
Horizontal and vertical directivity plot
Dispersion angle (degrees)
1k
1000
4040A
223 mm [8 13/16”]
237 mm [9 3/8”]
NOTE! THIS MONITOR SHOULD NOT BE MOUNTED ON A MICROPHONE STAND AS
THE BASE THREAD IS M10.
292-8040W
AVERTISSEMENT
RISQUE DE CHOC ÉLECTRIQUE. NE PAS OUVRIR. NE PAS EXPOSER À L'EAU OU
L'HUMIDITÉ. AUCUN COMPOSANT À L'INTÉRIEUR REMPLAÇABLE PAR
L'UTILISATEUR. ADRESSER TOUTE RÉPARATION À UN PERSONNEL QUALIFIÉ.
CET APPAREIL DOIT ÊTRE RACCORDÉ À LA TERRE.
www.genelec.com
_
+
GND
+12V
4040A ACTIVE
SPEAKER SYSTEM
MADE IN FINLAND
Genelec Oy 4040
GND
OFF
REMOTE MAINS
SWITCHING
ON
SERIAL NUMBER
292-4040T-6
MAINS INPUT
50 / 60 Hz 170 W 230 V~
BALANCED
INPUT SIGNAL
NOTE! CE MONITEUR NE DOIT PAS ÊTRE MONTÉ SUR UN PIED DE MICROPHONE
CAR LE PAS DE VIS EST DE TYPE M10.
Acoustic axis
225 mm [8 7/8”]
WARNING
ELECTRIC SHOCK HAZARD. DO NOT OPEN. DO NOT SUBJECT TO WATER OR
MOISTURE. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL. USE EARTHED MAINS CONNECTION ONLY.
Center of gravity
162 mm [6 3/8”]
350 mm [13 3/4”]
Center of gravity
114 mm [4 1/2”]
(dBr) vs freq (Hz) 31 Jul 12
Genelec Oy 4040
95
d
B 90
r
95
d
B 90
r
A 85
A 85
80
(dBr) vs freq (Hz) 31 Jul 12
0° 15° 30°
80
TREBLE TILT
BASS TILT
90
75
45°
85
60°
70
80
65
BASS ROLL-OFF
75
60
30
50
100
200
500
1k
2k
5k
10k
20k Hz
30
The effect of the Bass Tilt, Bass Roll-Off and Treble Tilt controls
on the free field response.
50
100
200
500
1k
2k
5k
10k
20k Hz
The curves above show the horizontal directivity characteristics
of the loudspeaker. The lower curve shows the loudspeaker’s
power response.
Horizontal and vertical directivity plot
4040A
Dispersion angle (degrees)
Frequency of > 150 deg dispersion (Hz)
Horizontal
Vertical
110
100
4000 Series active loudspeakers for AV install
800
9
Accessories
Genelec offers a wide range of accessories for the 4000 series active
loudspeakers. Below are only a few samples of the full Genelec Accessories
range. Please visit Genelec WebShop to see the current selection and to place
your order at www.genelec.com/webshop/loudspeaker-accessories.html.
You can also purchase these accessories through your local Genelec dealer.
Fixed wall mount for 4020B and 4030B.
A keyhole type wall mount bracket is included
with each loudspeaker.
8000-410B Black
8000-410W White
Adjustable wall mount with T-plate for 4010, 4020
and 4030. Available in black or white.
8000-422B Black (K&M 24160-000-56)
8000-422W White (K&M 24160-000-66)
With this small VESA adapter one can mount
4020B or 4030B loudspeakers into any kind of
VESA 75/100 based accessories.
Adjustable wall mount for 4030 and 4040.
Available in black or white.
Security wire available - part no. 8000-418B.
8000-437B VESA adapter 75/100 mm
8000-402B Black (K&M 24475-000-55)
8000-402W White (K&M 24475-000-57)
Short ceiling mount for 4020B and 4030B.
Available in black or white.
Additional security wire, 420 mm. Also suitable for
wall mount - part no. 8000-402.
8000-435B Black (K&M 24485-000-55)
8000-435W White (K&M 24485-000-57)
8000-418B (K&M 24521-901-55)
Technical specifications
4010A
4020B
4030B
4040A
Lower cut-off frequency, -6 dB
< 67 Hz
< 59 Hz
< 50 Hz
< 50 Hz
Upper cut-off frequency, -6 dB
> 25 kHz
> 25 kHz
> 25 kHz
> 25 kHz
Free field frequency response
74 Hz - 18 kHz (± 2.5 dB) 66 Hz - 20 kHz (± 2.5 dB) 58 Hz - 20 kHz (± 2.5 dB) 55 Hz - 20 kHz (± 3.0 dB)
Maximum short term sine wave acoustic output on
axis in half space, averaged from 100 Hz to 3 kHz
@ 1 m > 96 dB SPL
@ 1 m > 96 dB SPL
@ 1 m > 100 dB SPL
@ 1 m > 109 dB SPL
Maximum long term RMS acoustic output in same
conditions with IEC weighted noise (limited by driver
unit protection circuit)
@ 1 m > 91 dB SPL
@ 1 m > 95 dB SPL
@ 1 m > 97 dB SPL
@ 1 m > 101 dB SPL
Maximum peak acoustic output per pair with music
material
@ 1 m > 102 dB
@ 1 m > 105 dB
@ 1 m > 108 dB
@ 1 m > 114 dB
Self generated noise level in half space at 1 m on
axis (A-weighted)
< 5 dB
< 10 dB
< 10 dB
< 10 dB
Harmonic distortion at given SPL at 1 m on axis
85 dB SPL
70...400 Hz < 3 %
> 400 Hz < 0.5 %
85 dB SPL
50…100 Hz < 3 %
> 100 Hz < 0.5 %
85 dB SPL
50…100 Hz < 2 %
> 100 Hz < 0.5 %
90 dB SPL
50…100 Hz < 3 %
> 100 Hz < 0.5 %
76 mm (3 in) cone
19 mm (3/4 in)
metal dome
105 mm (4 in) cone
19 mm (3/4 in)
metal dome
130 mm (5 in) cone
19 mm (3/4 in)
metal dome
165 mm (61/2 in) cone
19 mm (3/4 in)
metal dome
Weight
1.5 kg (3.3 lb)
3.6 kg (7.9 lb)
5.5 kg (12.1 lb)
9.9 kg (22 lb)
Dimensions
Height
Width
Depth
181 mm (71/8 in)
121 mm (43/4 in)
114 mm (41/2 in)
226 mm (87/8 in)
151 mm (6 in)
142 mm (55/8 in)
285 mm (111/4 in)
189 mm (77/16 in)
178 mm ( 71/16 in)
350 mm (133/16 in)
237 mm (93/8 in)
223 mm ( 813/16 in)
Amplifier section
4010A
4020B
4030B
4040A
Bass amplifier short term output power
Treble amplifier short term output power
25 W
25 W
20 W
20 W
40 W
40 W
120 W
120 W
Amplifier system THD at nominal output
< 0.08 %
< 0.08 %
< 0.08 %
< 0.05 %
Mains voltage
Voltage operating range
100 - 240 V
Drivers
Bass
Treble
Long term output power is limited by driver unit
protection circuitry
Power consumption (average)
Standby
Idle
Full output
Crossover section
100, 120, 220 or 230 V AC according to region
±10 %
<0.5 W
5W
30 W
<0.5 W
5W
50 W
<0.5 W
10 W
80 W
<0.5 W
15 W
170 W
4010A
4020B
4030B
4040A
Signal input connector
Balanced 10 kOhm Phoenix connector
Input level for 100 dB SPL output at 1 m
-6 dBu
(Sensitivity -10 dB OFF)
-6 dBu at volume control max
Sensitivity control range
-10 dB
(Sensitivity -10 dB ON)
-40 dB relative to max output
-12 dB
Output signal level is 0 dB relative to input signal
level but adjustable by sensitivity control
Crossover frequency, Bass/Treble
3.0 kHz
3.0 kHz
3.0 kHz
2.5 kHz
Treble Tilt control operating range
0 to -2 dB @ 5 kHz
0 to -2 dB @ 15 kHz
0 to -2 dB @ 15 kHz
+2 to -4 dB @ 15 kHz
+ Mute
Bass Tilt control operating range in 2 dB steps
From 0 to -6 dB
@ 100 Hz
From 0 to -6 dB
@ 100 Hz
From 0 to -6 dB
@ 100 Hz
From 0 to -6 dB
@ 100 Hz + Mute
Bass Roll-Off control
N/A
-6 dB step @ 85 Hz
-6 dB step @ 85 Hz
From 0 to -6 dB
@ 55 Hz
The ‘CAL’ position is with all tone controls set to ‘off’ and the input sensitivity control to maximum (fully clockwise).
4000 Series active loudspeakers for AV install
11
www.genelec.com
Genelec Oy
Olvitie 5 · 74100 Iisalmi · Finland
T +358 17 83 881 · F +358 17 81 2267
Email: genelec@genelec.com
Genelec Document BBAGE069d. Copyright Genelec Oy 2015.
All data subject to change without prior notice.