1. business and industrial
2. energy
3. oil

Delivery Programme for Shipbuilding and Industry
Valves, Fittings, Engineering and Service
Shipbuilding and Industry
Our delivery programme for shipbuilding and industry includes:
Valves, gate-, butterfly-, ball- and safety valves, fittings for fire extinguishers, filters, actuators,
compensators and corresponding accessories according to national and international standards
e.g. DIN, JIS, ANSI etc. in normal or in seawater resistant variants.
Fittings and system solutions from our com­pany are used in shipbuilding, machine- and
plant-building as well as in industrial environments of (petro-) chemical industry, energy supply,
nuclear power stations, water technology and -purification, steam generation, hospitals and
breweries.
stop and non-return valves
solenoid valves
safety and overflow valves
gate valves
butterfly and non-return valves
compensators
JIS valves
ball valves
filters
pressure reducing valves
Steam and Condensation
Steam is unrivalled as heat and energy transfer in the specific output of energy.
On the strength of the high pressure power every consumer is fed without
additional energy. These and further properties are to be found in laundries, breweries, industrial plants (e.g. food producers), power plants and last but not least in
seagoing vessels.
Our delivery programme for steam and condensation additionally
includes our range for shipbuilding and industry in:
• non-return valves, double non-return valves
• steam traps
• mechanical temperature control valves
• steam separators
• pressure reducing valves
• industrial electronics for level-, temperature- and conductivity
measuring, monitoring as well as control loop systems.
steam traps and -units
non-return valves
steam separators
blow down valves
2
www.barthel-armaturen.de
boiler electronics
Control Valves
Automated 2- and 3-way valves control and monitor technical processes of
gaseous and liquid fluids in all areas of ships and industry.
To meet these requirements you can choose between different characteristic
lines with several cone forms and seat combinations.
All control valves meet the most actual level of technology in compliance with
the ascertainments of quality in accordance with PED 97/23/EG, directive 94/9/
EG (ATEX) and DIN IEC 534.
control valves
High pressure
control valves
automated stop
valves/ball valves
temperature
control valves
Electronics
Level Technology
Industrial electronics are an absolutely e­ ssential element of upgraded automation
of technical processes. Assigned to shipbuilding, power-plants, chemical and
pharmacy ventures, refineries, paper mills, breweries, super laundries, hospitals,
in food industry, sugar fabrication, in tyre production and many other industrial
branches designers benefit by rationalized economical procedures.
Barthel Armaturen distributes solutions for level
measurement technology. Ship- and steam-boiler
shops, chemical plants, refineries, power plants
and areas of environmental protection operate
with level indicators and sight glasses.
Our delivery programme includes among others:
• magnetic level indicators
• tank volume measuring systems
• reflection indicators
• flange sight glasses for welding,
screwing or soldering
• replacement glasses
• liquid level indicators
• oil level indicators
• liquid pipes and accessories
magnetic
level indicators
industrial electronics
switchboard
design and
construction
universal controlling and programming
magnetic float switches
fluid level indicators
sight glasses
www.barthel-armaturen.de
3
Hydraulic, Pneumatic, Industrial
Equipment and Hose Line Assembly
Since 1937 we are authorized and certificated distributor for Parker Hannifin/Ermeto
products. Therewith we are the second eldest partner who accompanies Parker
nationally.
With the status as a Full-Line trader, a large stock and our own hose line m
­ anufacturing
plant we are able and flexible to supply you immediately with the complete product
range for hydraulics and pneumatics and any further industrial equipment e.g.:
• connections made of galv. zinc plated steel, stainless steel, brass, CuNi10Fe and bronze
• tubes, tube clamps, hoses as well as individual hose lines
• flanges, sealings, installation adhesives
Furthermore the Parker programme covers hydraulic and pneumatic actuation
components, connection parts, refrigeration technology components, which have ­
stood the test continuously a.o. in mechanical engineering, plant engineering,
vehicle- and ship-building and -construction, in chemistry, energy-, measurement and
control technology and many other branches have been approved a million times.
extract Parker programme
EO-2-System
valves
tubes and tube clamps
Pressure, Temperature and Accessories
Since more than 20 yeras we are supplying pressure measuring technology for
hydraulic and pneumatic pressure applications as well as temperature measuring
technology for shipbuilding and for almost all industrial fields of application of
mechanical and process engineering as well as energy technology. Large
warehouses as well as long lasting partnerships are proof of quality, flexibility and
efficiency within that range of products.
We stock up for you:
• standard pressure gauges, unfilled resp. filled with glycerine of all variants
• absolute- and differential pressure gauges
• pressure sensors and -switches
• temperature measuring devices, mechanical and electronical
• bimetal- and resistance thermometers
• machine thermometers
• pressure gauge cocks and -valves
• accessories e.g. adaptors, measuring device supports
pressure gauges
pressure gauge cocks and -valves
pressure gauge units
4
www.barthel-armaturen.de
thermometers
Sampling Systems
Starting from the assumption of the approved principles of taking samples Barthel
sampling systems realize all requirements of safe and representative sample taking
by individual adaptation of details.
We are specialists for custom-made solutions which meet the high safety standards
as well as the statutory demands (e.g. TA-air) of chemistry and petrochemical
industry. For taking samples out of fluids, solids, gases and their composites we
­derive benefit from the whole range of p­ otentialities of technical solutions.
Therefore our delivery programme includes a.o. fixed-volume systems, draw-off
into sample cylinders, needle-/septum techniques, cross-cut systems as well as
auger samplers.
Flow Measurement with Head Meters
(Differential Pressure Producers)
Although many new developments have come onto the market within the last years
flow measurement according to differential pressure procedure has become the
most applied measuring method in chemical and petro-chemical plants.
A large stock of raw material, also special materials, ensures a short delivery time.
Design, production and test of head meters are performed according to ISO 9001
and pressure equipment directive (PED) 97/23/EC in accordance with your flow
conditions.
• calculations acc. to ISO 5167 (DIN 1952)
• orifice plates with single tap or carrier ring
• head meters for welding or wafer type
• meter runs
• orifice flanges, orifice plates
• venturi nozzles, ISA-1932-nozzles
• venturi tubes, inlet nozzles
• segmental orifices, quarter circle nozzles
• integral pressure tubes
• balance vessels
• shut-off valves
• valve blocks
• evaluation devices for differential pressure producers
orifice plates with carrier ring
orifice flanges
venturi tubes
orifice plates
with carrier ring
sectional figure
meter runs
orifice plates
with setback
www.barthel-armaturen.de
5
Marine Shipbuilding
As a manufacturer and longtime supplier of the German Navy we almost provide all
well-known shipyards and supplier enterprises with valves, equipment and special
solutions according to VG standards. Since years even electrical gear motor drive
technology has successfully been applied in marine shipbuilding. The installation of
e-actuators onto the valves ex works is possible without any problems by
respecting standards and modular systems. Our delivery programme ex stock goes
into action as original equipment on frigates, mine hunters, corvettes, trial ships,
ultra-modern mega yachts and ­satisfies the need of spare parts of maintenance
and alterations.
Special Construction
Many years of experience with practical orientation in the range of special valves
and plant engineering enables us to meet the individual requirements of our
customers.
From simply modified standards up to developement and adjustment of actuators
and control drives as well as vessel- and plant construction we design and fabricate
in accordance with your individual requirements.
special filters
units
line samplers
sample coolers
special valves
6
www.barthel-armaturen.de
special fittings
An Outright Complete
Service Spectrum
“Better a small master than a great servant“ …
Truly in accordance with his motto Fritz Barthel
established the company Fritz Barthel Armaturen on
April 1st., 1932.
Because of his long experience in shipbuilding and
own manufacturing. Fritz Barthel was soon able to
realise a high individual conformity with the special
requirements of the Hamburgian and North German
shipyards and industries.
Our goal is to carry on working on a balanced and
high-quality delivery programme. The combination
of quality, know-how and family tradition in the 3rd
generation provides a flexible and responsible partner­ship. With up-to-date production on conventional and
CNC lathe and milling machines we manufacture
according to your or our drawings (2D/3D) out of all
materials. Our large stock enables us to shorten
delivery times considerably.
As service provider and -partner we also offer
short-dated repairs, inspections and adjustments of
steam traps, safety valves as well as control valves.
Certification and approvals
Traditionally quality assurance rates high in our company.
We are in possessions of approvals a.o. as follows:
• since 1996 quality system
DIN EN ISO 9001:2008 (GLC)
• since 2001 PED 97/23/EG
• since 1995 approval acc. to TRD 201 EN 729-2
as manufacturer of surveillance plants
• KTA 1401 and QSP 4a
www.barthel-armaturen.de
7
Fritz Barthel Armaturen GmbH & Co. KG
Schnackenburgallee 16 · 22525 Hamburg – Germany
phone +49 (0)40 39 82 02-0 · fax +49 (0)40 39 82 02-77
post@barthel-armaturen.de · www.barthel-armaturen.de