1. No category

RO SYSTEMS
JEFFY made design, fabricate and erect RO system based
on the water quality, quantity,% recovery and as per client needs.
JEFFY provide ISI plant (packaged drinking water plants).
JEFFY provide drinking water plant for schools, colleges, factory, offices,
commercial buildings, hotels and hospitals
System Capacity:0.25 100m3/hr
Advantages of our systems:
* low operating cost
* low chemical consumption
* easy & effective operations
* monitoring of systems parameters
DOMESTIC RO SYSTEMS AND SPARES
We Manufacture The Following Systems And Components
We Deal with Following Components
1. Inorganic removal systems; RO,Nano, De-mineraiization & Mixed bed.
2. Organic removal systems: MBR SYSTEMS, UV systems, Ozone generator
and chemical dosing systems.
3. Suspended, Colour & Odour Removal Systems: DMF, PSF, ACF, IRF, MGF, UF system
4. Plants: DM, MB, DGT, SOFINER, plants.
5. Filters: All type of membrane pr.tubes SS304 & 316, MS/SS vessels. Cartridge
filter Housing and bag filter housing.
1. All types of RO and NF membranes, memb.pr.tubes
and Pressure vessels in FRP.
2. All types of Mutiport valves, Roto Meters, Pressure
Gauge, TDS and PH meters.
3. All types of filter medias.
4. All types of Ozone generator components
5. All types of U V Lamps and accessories
Jeffy Engineering & Traders
SOLUTIONS IN AQUA PURIFICATION
Industry / Institutions / Housing Societies / Hotels / Resorts / IT Parks
An ISO 9001 2008 Certified Company
B.O : B.O : No. 7,
4th Street, Bazaar Nagar, Avadi,
Chennai - 600 071.
E-mail : jeffytraders@gmail.com
Mob : 8608312997
www.jeffygroups.com
SOLUTIONS IN AQUA PURIFICATION
Industry / Institutions / Housing Societies / Hotels / Resorts / IT Parks
An ISO 9001 2008 Certified Company
* compact and noise-less
H.O : No. 9/38,
2nd Street, Vivekananda Nagar,
Chennai - 600 118.
E-mail : jeffytraders@gmail.com
Mob : 9444865809
Jeffy Engineering & Traders
B.O : No. 135,
Pandara Street, Periya Milagu Parai,
Trichy - 620 001.
E-mail : jeffyengineeringtrichy@gmail.com
Mob : 9524033222
ULTRAFILTRATION SYSTEM (UFS)
SWIMMING POOL SYSTEMS, ACCESSORIES AND CHEMICALS
JEFFY Ultrafiltration system (UFs) is a separation process using membranes
with pore sizes in the range of 0.1 to 0-001 micron. The UF membranes
remove high molecular-weight substances, colloidal material, and organic
and inorganic polymeric molecules. With only high-molecular weight
contaminants removed, the Osmotic pressure differential across the UF
membrane surface is negligible. Low applied pressures are therefore
sufficient to achieve high flux rates from Ultrafiltration membrane.
JEFFY provide design, fabricate and supply filter, dosing systems, UV
sterilizers, ozone generators, cleaning attachments, ladder, etc.
WATER TREATMENT CHEMICALS
JEFFY provide unique formulations of
1. Antisclant, preservatives, de-scaling chemicals,
pH boosters for RO,UF and other water treatment systems.
2. And also supply basic chemicals like citric acid, SMBS, acids, Sodium
hypo chloride.
Capacity 0.5-200m3/hr
FILER VESSELS
We design, fabricate and erect the filters made of MS/MSFRP/MSRI/SS304/
SS316/FRP/ based on the water quality, environmental condition
and application of the filters.
SEA WATER RO SYSTEM (SWRO)
FRP vessels are made of high performance composite material with filament winding.
JEFFY provide design, fabricate, erect, operating and maintenance
All vessel are corrosion resistant with thermoplastic liners of polyester.
SWRO system IDS UFTO 50000PPM
SS vessels are made of SS304/SS3161 with internal quartz polymer lined with high
corrosive resistant properties.
CAPACITY: 0.5-100 M3/HR
MS vessel are made IS2062 with internals which are corrosion protected using
CLEANING SYSTEMS
coal material like Epoxy paint, FRP lining, rubber lining The above vessels are
JEFFY provide design and fabricate Cleaning system suitable for
widely used for pressure filters like dual media filter,multi graded filter, activated
carbon filter, iron removal filter, soflners, D.M plants and mixed bed.
RO/NANO/ UF/MBRSYTEMS
Capacity from Q.l-200m3/hr.
MOC of the tank :HTPE/MSFRP/MSRI/SS316L
UV SYSTEMS
JEFFY use special low-pressure mercury vapour lamps to produce ultraviolet
radiation of 254 mm, the optimal wavelength for disinfection and ozone
destruction, our systems are capable of striking bacteria, algae, fungi &
protozoa and rendering them harmless. The UV units ate built with high
efficiency UV lamps surrounded by Quartz glass sleeves to isolate the
bulbs from water contact thereby preventing thermal shock, glass
breakage and mercury contamination. The sleeves also ensure very high
transmission of UV energy with lesser losses. The bulb with sleeves is
accommodated in precision engineered SS vessel. A wiper assembly is
provided for periodic cleaning of Quartz glass for all models [optional).
An electronic ballast operating on 230V, single phase, 50 Hz, AC
triggers the UV bulb and ensures minimum power consumption.
Capacity 0.25-100m3/hr in online & open tank from 1 OQm3/hr
CARTRIDGE FILTER HOUSINGS
JEFFY manufacture cartridge filter and bag filter housing in
SS304 and SS316 &SS316L grades.
Sizes : Dia X height
Cartridge dia 2.5" x 10", 20", 30" & 40" single and multiple cartridges
Cartridge dia 4.5" jumbo x 10" & 20" single and multiple cartridges
Bag filter 4" x 10" & 20" 7" x 32" single and multiple bags
All end connection ore Flanged / Screwed.
MEDIA & COMPONENTS
Advantages of our systems:
JEFFY supply all type of media like Activated carbon, Mn02,
Anthracite, Green sand, Birm media, quartz sand, pebbles,
Cation resin, Anion resin, Mixed bed resin.
JEFFY supply all type of RO [BW & SW),NF and UF membranes.
JEFFY supply all type pp strainer, ejector, membrane connector
and brine seal.
* Generate low sludge with low operating cost
BIRM MEDIA
SEWAGE TREATMENT PINTS (STP)
JEFFY provide design, fabricate, erect, operate and maintenance STP,
FBBR based STP, based STP, STP and under ground STP
* Remove hydrocarbons, BOD and COD
* Compact oho Noise-less.
far Birm to effectively remove iron, the pH of the raw water must be
greater than 6.8. If both Iron and Manganese are present, the pH
should be between 7.5 and 8.5. For Manganese removal the pH should
be between 8.0 and 9.0 For best results.