1. technology and computing
2. hardware

Plate Door Handles
We take the worry out of
protecting what’s valuable to you.
Lockwood:
no worries
®
www.lockweb.com.au
We take the worry out of
protecting what’s valuable to you.
Lockwood:
no worries
®
Contents
1800 Series
2800 Series
4800 Series
5800 Series
Brass Levers
Square End Plate
Furniture
Round End Plate
Furniture
Narrow Stile Plate
Furniture
Round End Plate
Furniture
page 4
page 6
page 9
page 11
page 15
200 Series Artefact
202 Series Artefact
212 Series Artefact
224 Series Artefact
Detention Series
Square Corner Plate
Furniture
Radius Corner Plate
Oval Corner Plate
Rectangular Plate
Square and Rectangular
Furniture
page 23
page 25
page 28
page 30
page 33
Brass Furniture Thicker Door Accessories____________________ 52
Lockwood Door Furniture Handing Convention_______________ 53
Palladium Series
Diecast Levers
Dulux Powdercoat Range__________________________________ 56
Door Handles
page 42
Combination Finish Selection Guide_________________________ 54
page 49
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
3
1800 Series Square End Plate Furniture
Description
For a smart look choose this
rectangular plate with bevelled edges
and corners. It features concealed
fixing on the outside plate.
Application
Designed for use with Lockwood
Synergy Mortice Locks and Latches.
166
12
Product Details
Door Thickness
External plates are supplied with fixing screws to suit
door thickness between 32 and 45mm.
For thicker doors, please refer to the brass furniture
thicker doors page at the end of this catalogue section.
Dimensions
166 x 48 x 12mm
Fixing
Plates are designed to fit back to back. If outside plate
is specified with concealed fixing, then the inside plate
must be visible fixed.
Handing
Plates are not handed; levers may be reversed by
removing the stop screw, except for handed levers and
functions as shown in the ordering procedure.
Standard
Finishes
Satin Chrome Brushed (SC)
Non Standard
Finishes
Polished Brass (PB)
Chrome Plate (CP)
Polyester Powdercoat (PC)*
Special Finishes
Polished Brass Unlaqured (BU)
Satin Brass (SB)
Architectural Bronze (AZ)
Architectural Bronze Unlaqured (AU)
Antique Copper (AC)
Oil Rubbed Bronze (ORB)
Turn Functions
Turn functions feature a unique mechanism that
automatically adjusts the length of the tail bar to suit a
particular door thickness.
48
* For the Powdercoat colour range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
4
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Standards and Compliance
Successfully tested up to 4
hours on fire door assemblies
in accordance with Australian
Standard AS1905.1 2005 - Part 1:
Fire Resistant Doorsets.
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Tested to AS 4145.2 1993 for
Neutral Salt Spray with SC Finish
Passing C10 Extreme Corrosion
Resistance - 1000 hours.
Australian Made
AS1428.1 Compliance
The range includes AS1428.1
compliant levers and turns as
shown.
32
41
53
45
44
55
1800 Series
Levers
and 67Functions
61
70
65
66
60
55A
59
71
74
2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2813
76
77
Levers
to Suit
90 and Knobs92
78
79
80
79B
83
85
97
2814 2815 2816 2820 2821 2822 2823 2878
20
32
41
44
45
53
55A
55
2900
2905612906 2907
2909 2920
59 2901 2904
65 2908 66
672921 2922
60
70 2939 71
74
76
77
78
85
90
92
97
79
79B
80
83
For lever images and dimensions, see page 15.
00
32
41*
57
59
60
Plates and Functions
42*
61*
48*
45
70
49
71
51*
80
1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1813 1814
53*
52*
83
54*
90
87
1815 1816 1820 1821 1822 1823 1878
1900 1901 1904 1905 1906 1907 1908 1909 1920 1921 1922 1938 1939
Plates and Functions Legend
Cylinder Hole
Fixed Lever
Indicating Turnknob
Turnknob
Disabled
Indicating Slotted Turn
Slotted Turn
LED
Lever
5800 5801 5802 5803 5805 5807 5820 5822 5823
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
5922
5900 5901 5904 5905 5906 5907 5917 5918 5920
1300 LOCK UP (1300 562 587) lockweb.com.au
5
2800 Series Round End Plate Furniture
Description
For a smart look choose this
rectangular plate with bevelled edges
and corners. It features concealed
fixing on the outside plate.
Application
Designed for use with Lockwood
Synergy Mortice Locks and Latches.
166
12
Product Details
Door Thickness
External plates are supplied with fixing screws to suit
door thickness between 32 and 45mm.
For thicker doors, please refer to the brass furniture
thicker doors page at the end of this catalogue section.
Dimensions
166 x 48 x 12mm
Fixing
Plates are designed to fit back to back. If outside plate
is specified with concealed fixing, then the inside plate
must be visible fixed.
Handing
Plates are not handed; levers may be reversed by
removing the stop screw, except for handed levers and
functions as shown in the ordering procedure.
Standard
Finishes
Satin Chrome Brushed (SC)
Non Standard
Finishes
Polished Brass (PB)
Chrome Plate (CP)
Polyester Powdercoat (PC)*
Special Finishes
Polished Brass Unlaqured (BU)
Satin Brass (SB)
Architectural Bronze (AZ)
Architectural Bronze Unlaqured (AU)
Antique Copper (AC)
Oil Rubbed Bronze (ORB)
48
Turn Functions
Turn functions feature a unique mechanism that
automatically adjusts the length of the tail bar to suit a
particular door thickness.
* For the Powdercoat colour range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
6
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Standards and Compliance
Successfully tested up to 4
hours on fire door assemblies
in accordance with Australian
Standard AS1905.1 2005 - Part 1:
Fire Resistant Doorsets.
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Tested to AS 4145.2 1993 for
Neutral Salt Spray with SC Finish
Passing C10 Extreme Corrosion
Resistance - 1000 hours.
Australian Made
AS1428.1 Compliance
The range includes AS1428.1
compliant levers and turns as
shown.
48
53
55A
59
2800
Series
Levers
and 67Functions
60
61
70
65
66
71
74
76
83
85
32
41
77
Levers
to Suit
90and Knobs 92
45
44
78
79
55
80
79B
97
20
32
41
44
45
53
55
55A
59
60
61
65
66
67
70
71
74
76
77
78
79
79B
80
83
85
90
92
97
For lever images and dimensions, see page 15.
00
32
41*
42*
48*
45
49
51*
52*
53*
54*
Plates and Functions
57
59
60
61*
70
71
80
2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2813
83
90
87
2814 2815 2816 2820 2821 2822 2823 2878
2900 2901 2904 2905 2906 2907 2908 2909 2920 2921 2922 2939
Plates and Functions Legend
Cylinder Hole
Fixed Lever
Indicating Turnknob
Turnknob
Disabled
Indicating Slotted Turn
Slotted Turn
LED
Lever
1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1813 1814
1815 1816 1820 1821 1822 1823 1878
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
7
1800 and 2800 Series Ordering Procedure
For example:
Sample part number 1801/41LCP is made up
of several selections. Choose your product by
selecting an option from each section.
Plate Type
Plate
Function
18
Lever/
Knob
/
01
Plate Type
Handing
41
L
Finish
CP
Plate Funtion
Lever/Knob Type
Handing
Finish
Exterior Square End 18
Cylinder Only
00
20 6079
Right Handed
R
Satin Chrome
Interior Square End
19
Cylinder & Lever
01
32 6579B
Left Handed
L
Polished Brass
PB
Exterior Round End
28
Emergency Turn Only
02
44 6683
Chrome Plate
CP
Interior Round End
29
Emergency Turn & Lever
03
45 6797
Polished Brass UnlaqueredBU
Turnknob & Lever
04
5571
Polyester PowdercoatPC
Lever Only
05
55A78
Satin BrassSB
Turnknob Only
06
Plain Plate
07
Cylinder & Fixed lever
08
Fixed Lever Only
09
Two Cylinders
10
Privacy Indicator
Emergency Turn Only
13
Privacy Indicator
Emergency Turn & Lever
14
Privacy Indicator
Turnknob Only
15
Privacy Indicator
Turnknob & Lever
16
AS1428.1 Compliant
Levers
59 7685
70 7790
74 8092
Handed Levers
41 5361
Privacy Indicator Emergency
Turn & Lower Cylinder
19
Cylinder, Lever & LED
20
Cylinder, Fixed
Lever & LED
21
Lever & LED
22
Cylinder & LED
23
Proximity Cylinder & Lever 78
Plate Function - Handed
Disabled Accessible Turnknob
Only - Synergy
38
Disabled Accessible Turnknob
& Lever - Synergy
39
Privacy Indicating Disabled
Turn Only - Synergy
40
Privacy Indicating Disabled
Turn & Lever - Synergy
41
8
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
NB: Omit if non-handed
SC
Architectural Bronze
UnlaquredAU
Antique CopperAC
Oil Rubbed BronzeORB
* For the powdercoat colour range,
please see the Dulux Powdercoat
Range at the end of this catalogue
section.
4800 Series Narrow Stile Plate Furniture
Description
A slimline, rectangular brass plate that
adds style to your choice of lever.
Application
Product Details
Door Thickness
Designed for use with Lockwood
3570 Synergy Series Mortice Latches
(4600/4700) and 3580 Series Synergy
Note: certain lever designs are not
compatible on short backset assemblies due
to interference with the door stop. Refer to
the Back Set Suitability page at the end of
this section.
11.5
External plates are supplied with fixing screws to suit
door thickness between 32 and 50mm.
For thicker doors, please refer to the brass furniture
thicker doors page at the end of this catalogue section.
Dimensions
185 x 26 x 11.5mm
Fixing
Plates are designed to fit back to back. If outside plate
is specified with concealed fixing, then the inside plate
must be visible fixed. All lever handles are reversible,
except those shown in the ordering procedure.
Handing
Plates are not handed; levers may be reversed by
removing the stop screw, except for handed levers and
functions as shown in the ordering procedure.
Standard
Finishes
Satin Chrome Brushed (SC)
Non Standard
Finishes
Polished Brass (PB)
Chrome Plate (CP)
Polyester Powdercoat (PC)*
Special Finishes
Polished Brass Unlaqured (BU)
Satin Brass (SB)
Architectural Bronze (AZ)
Architectural Bronze Unlaqured (AU)
Antique Copper (AC)
Oil Rubbed Bronze (ORB)
Turn Functions
Turn functions feature a unique mechanism that
automatically adjusts the length of the tail bar to suit a
particular door thickness.
185
26
Standards and Compliance
Fire Rated (3570 Series only).
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Anti‑Corrosion.
Australian Made
AS1428.1 Compliance
The range includes AS1428.1
compliant levers and turns as
shown.
* For the Powdercoat colour range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
9
00
20
32
4800 Series Levers and Functions
53*
40
41*
56*
54*
42*
59
57
48*
49
70
80
45
43
44
60
61*
69
Levers and Knobs to Suit
32
41
44
45
53
55
55A
59
60
61
65
66
67
70
71
74
76
77
78
79
79B
80
83
85
90
92
97
For lever images and dimensions, see page 15.
20
32
41
44
45
53
55A
55
4800/4900 Plates and Functions (3580 Series)
4800 59 4801
4800 4801
76
74
4900
4900
85
60
65 4808 4809
66
70 4823
4802
4803 614805 4807
4810 674820 4822
4802 4803 4805 4807 4808 4809 4810 4820 4822 4823
4901
4901
77
79
78
79B
80
92
90
97
4904 4905 4906 4907 4908 4909 4910 4920 4922
4904 4905 4906 4907 4908 4909 4910 4920 4922
00
32
41*
57
59
60
42*
61*
48*
45
70
83
4938 4939
4938 4939
49
71
4600/4700 Plates and Functions (3570 Series)
4600
4600
4601
4601
4602 4603
4602 4603
71
4805 4807 4608 4809 4620 4622 4623
4805 4807 4608 4809 4620 4622 4623
51*
80
52*
87
83
Plates and Functions Legend
Cylinder Hole
Turnknob
Slotted Turn
Fixed Lever
4700
4700
4701
4701
4704 4905
4704 4905
4706 4907 4708 4909 4720 4722
4706 4907 4708 4909 4720 4722
4738 4739
4738 4739
Disabled
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
For parts in red, lever and plain plate versions use the 4800/4900 versions.
10
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
53*
54
90
5800 Series Narrow Stile Plate Furniture
Description
Functional, yet elegant, the soft
lines of this round ended brass plate
complement a wide range of levers.
Application
Product Details
Dimensions
185 x 26 x 11.5mm
Door Thickness
External plates are supplied with fixing screws to suit
door thickness between 32 and 50mm. For thicker
doors, please refer to the brass furniture thicker doors
page at the end of this catalogue section.
Fixing
Plates are designed to fit back to back.
If outside plate is specified with concealed fixing, then
the inside plate must be visible fixed. All lever handles
are reversible, except those shown in the ordering
procedure.
Handing
Plates are not handed; levers may be reversed by
removing the stop screw, except for handed levers and
functions as shown in the ordering procedure.
Designed for use with Lockwood
3570 Synergy Series Mortice Latches
(4600/4700) and 3580 Series Synergy
Note: certain lever designs are not
compatible on short backset assemblies due
to interference with the door stop. Refer to
the backset suitability chart on page 3.87.
185
26
Standards and Compliance
Standard
Finishes
Satin Chrome Brushed (SC)
Non Standard
Finishes
Polished Brass (PB)
Chrome Plate (CP)
Polyester Powdercoat (PC)*
Special Finishes
Polished Brass Unlaqured (BU)
Satin Brass (SB)
Architectural Bronze (AZ)
Architectural Bronze Unlaqured (AU)
Antique Copper (AC)
Oil Rubbed Bronze (ORB)
Turn Functions
Turn functions feature a unique mechanism that
automatically adjusts the length of the tail bar to suit a
particular door thickness.
11.5
Fire Rated. (3570 Series only)
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Anti‑Corrosion.
Australian Made
AS1428.1 Compliance
The range includes AS1428.1
compliant levers and turns as
shown.
* For the Powdercoat colour range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
11
00
20
32
5800 Series Levers and Functions
44
53*
60
61*
41*
56*
54*
42*
59
57
48*
49
70
80
45
43
40
69
Levers to Suit
32
41
44
45
53
55
55A
59
60
61
65
66
67
70
71
74
76
77
78
79
79B
80
83
85
90
92
97
For detailed information regarding brass levers refer to page 15.
20
32
41
44
45
53
55A
55
5800/5900 Plates and Functions (3580 Series)
5800595801 5802
5808 5809665810 5820
61 5807 65
60 5803 5805
67 5822 5823
70
74
76
77
79
78
79B
80
71
83
92 5907 97
90 5905 5906
5900855901 5904
5908 5909 5910 5920 5922 5938 5939
00
32
41*
57
59
60
5600/5700 Plates and Functions (3570 Series)
42*
61*
48*
45
70
49
71
5600 5601 5602 5603 5805 5807 5608 5809 5620 5622 5623
51*
80
52*
83
Cylinder Hole
Slotted Turn
Fixed Lever
Disabled
LED
Indicating Turnknob
Indicating Slotted Turn
Lever
For parts in red, lever and plain plate versions use the 5800/5900 versions.
12
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
87
Plates and Functions Legend
Turnknob
5700 5701 5704 5905 5706 5907 5708 5909 5720 5722 5738 5739
53*
4800 & 5800 Series Ordering Procedure
Example:
Sample part number 4801/53LCP is made up
of several selections. Choose your product by
selecting an option from each section.
Plate Type
Plate
Function
48
Lever Type
/
01
Plate Type
Handing
53
L
CP
Plate Function
3570
Finish
Lever Type
Handing
Finish
Cylinder Only
00
32
6579
Right Handed
R
Satin Chrome
SC
Exterior Square End
46
Cylinder & Lever
01
44
6679B
Left Handed
L
Polished Brass
PB
Interior Square End
47
Emergency Turn Only
02
45
6783
Exterior Round End
56
Emergency Turn & Lever
03
55
7197
Polished Brass UnlaquredBU
Interior Round End
57
Turnknob & Lever
04
55A
74
Polyester PowdercoatPC*
Lever Only
05
60
78
Satin BrassSB
3580
Exterior Square End
48
Turnknob Only
06
Interior Square End
49
Plain Plate
07
Exterior Round End
58
Two Cylinders
10
Cylinder, Lever & LED
20
Lever & LED
22
Cylinder & LED
23
Interior Round End59
AS1428.1 Compliant
Levers
59
7685
70
7790
74
8092
Plate Function - Handed
Handed Levers
Fixed Lever & Cyinder
08
41
Fixed Lever Only
09
NB: Omit if non-handed
Chrome Plate CP
Architectural Bronze
UnlaquredAU
Antique CopperAC
Oil Rubbed BronzeORB
* For the powdercoat colour range, see
the Dulux Powdercoat Range at the
end of this catalogue section.
5361
Cylinder, Fixed Lever & LED 21
Disabled Accessible Turnknob
Only - Syndergy
38S
Disabled Accessible Turnknob
& Lever - Synergy
39S
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
13
4800 & 5800 Series Lever Suitability
Application
All narrow style door furniture will be closer to the door frame. Lever handles with 90
degree angles can cause the lever stem to hit the door frame and prevent the door from
opening. The table below provides a guide to lever compatibility and each model of
short back set lock from 3582 to 6580. Based on 12mm doorstop.
Lever
Number
3580
23mm
4580
25.4mm
5580
30mm
6580
38mm
32
7
7
3
3
41
7
7
3
3
44
7
7
7
7
45
7
7
3
3
53
7
7
3
3
55
7
7
7
7
55A
7
7
3
3
59
7
7
3
3
60
7
7
3
3
61
7
3
3
3
65
7
7
3
3
66
7
7
3
3
67
3
3
3
3
70
3
3
3
3
71
7
7
3
3
74
7
7
3
3
76
7
7
3
3
77
3
3
3
3
78
7
7
3
3
79
7
7
7
7
79B
7
7
3
3
80
7
3
3
3
83
7
7
3
3
85
7
7
3
3
90
7
7
3
3
92
7
7
3
3
97
3
3
3
3
14
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Brass Levers and Knobs
Finger clearance is defined as the clearance
between the lever and the base of the
rose or plate at the centre of the lever.
The tables below are calculated using
an assembled plate/rose thickness of
12.5mm. Due to different bearing bush, the
projection and finger clearance of levers in
the 4800/5800 Series is 2.5mm larger than
the value shown (except Lever 90).
For use on the following door furniture series:
• 1220 Series
• 1420 Series
• 1360 Series
• 1370 Series
• 1800 Series
• 2800 Series
• 4800 Series
• 5800 Series
• Artefact Series
Knob 20
Diameter
50mm
Projection
73mm
Not compatible with 1220 Symphony
internal rose.
50
60.5
Lever 32
17.5
Length
107.5mm
Projection
53mm
Finger clearance
35.5mm
40.5
95.3
107.5
Intermezzo 41
21
Length
130mm
Projection
61.5mm
Finger clearance
40.5mm
49
40
* Lever is an asymmetrical design and
therefore must be handed.
120
130
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
15
Brass Levers and Knobs
Arpeggio 44
17.5
Length
125mm
Projection
59.5mm
Finger clearance
42mm
47
104
125
Sonata 45
17
Length
117.5mm
Projection
57mm
Finger clearance
40mm
44.5
107
117.5
Veloce 53
28.5
Length
123mm
Projection
73.5mm
Finger clearance
45mm
*Lever is an asymmetrical design and
therefore must be handed.
61
112.5
123
Lever 55
22.2
Length
124mm
Projection
62.5mm
Finger clearance
40.3mm
50
103
124
16
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Brass Levers and Knobs
22.2
Lever 55A
50
Length
115mm
Projection
62.5mm
Finger clearance
40.3mm
103
115
Overture 59
9
34.5
Length
121mm
Projection
57.5mm
Finger clearance
38mm
22
110
121
10.8
Lever 60
52.5
Length
121mm
Projection
65mm
Finger clearance
54.2mm
27.5
108.8
121
Lever 61
27
Length
120mm
Projection
52.5mm
Finger clearance
25.5mm
40
109.5
120
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
17
Brass Levers and Knobs
Lever 65
7.5
Length
121mm
Projection
51mm
Finger clearance
43.5mm
38
24
114.5
125.5
Lever 66
8.5
38
Length
125mm
Projection
50mm
Finger clearance
42mm
23.5
113
125
Lever 67
8
36
Length
127mm
Projection
48.5mm
Finger clearance
40.5mm
22
116
127
Lever 70
Length
121mm
Projection
53mm
Finger clearance
37mm
41
15.9
113
121
18
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Brass Levers and Knobs
Tempo 71
50
Length
118mm
Projection
62mm
Finger clearance
44.5mm
17
110
118
Ving 74
Length
120mm
Projection
53mm
Finger clearance
45mm
41
109
120
Lever 76
8.5
Length
125mm
Projection
50mm
Finger clearance
42mm
32
38
23
125
Lever 77
36
Length
121mm
Projection
51mm
Finger clearance
40.5mm
22
116
127
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
19
DAINTREE - dimensionals
BRASS - dimensionals
Brass Levers and Knobs
10
38
26
116
124
Candenza 78
22
52
Length
118mm
Projection
52mm
Finger clearance
30mm
11
105
116
DAINTREE - dimensionals
DAINTREE
- price
Tenor
79book style
Length
124mm
Projection
50.5mm
Finger clearance
40.5mm
BRASS - dimensionals
BRASS - price book style
10
38
26
116
124
22
52
10
38
11
Lever 79B
105
Length
118mm
Projection
50.5mm
Finger clearance
40.5mm
116
26
108
118
DAINTREE - price book style
BRASS - price book style
Lever 80
9
Length
123mm
Projection
49mm
Finger clearance
40mm
37
114.3
123
20
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Brass Levers and Knobs
Lever 83
28.5
49.5
Length
112mm
Projection
62mm
Finger clearance
33.5mm
101.5
112
Lever 85
7.5
Length
125.5mm
Projection
51mm
Finger clearance
43.5mm
38.5
24
114.5
125.5
Lever 90
7
39.5
Length
118.5mm
Projection
52mm
Finger clearance
45mm
25
106
118.5
7
Lever 92
39.5
Length
118.5mm
Projection
52mm
Finger clearance
45mm
20
25
106
118.5
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
21
Brass Levers and Knobs
Chorus Line 97
38
Length
120mm
Projection
50.5mm
Finger clearance
34.6mm
17
15.9
112
120
22
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
200 Series Artefact Square Corner Plate Furniture
General Description
The 200 Series Door Furniture is
162mm square with square corners.
Concealed fixed plates have studs with
internal threads located in each corner,
visible fixed plates have corresponding
countersunk holes and are fixed back
to back through the door.
Product Details
Dimensions
162 x 162 x 3mm - aluminium
162 x 162 x 2mm - stainless steel and brass
Door Thickness*
35 to 45mm standard. For doors 45 to 55mm thick,
specify long fixing screws SP2000-208.
Standard
Finishes
Natural Anodised Aluminium (NT)
Satin Stainless Steel (SS)
Fixing
Plates are designed to fit back to back. If outside plate
is specified with concealed fixing, then the inside plate
must be visible fixed.
Finishes
Non Standard
Polished Stainless Steel (PS)
Powdercoat (PC)*
316 Marine Grade (MG)
Polished Brass (PB)
Application
Designed for use with Lockwood
3570 Series Mortice Locks; Latches and
Push and Pull doors.
162
2
162
Standards and Compliance
3
Handing
All plates are handed with the exception of plain plates
and pull handles.
Materials
Aluminium, brass and stainless steel
Fire Rated.
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Anti‑Corrosion.
Note: When using flush pulls back to back the minimum door thickness is 40mm.
48.7
* For the Powdercoat color range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
28.6
2
SS/Brass
3
Aluminium
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
23
200 Series Levers and Functions
Levers and Knob to Suit
20*1
88*2
96
98
For lever images and dimensions, see page 15.
*2
*2
1 Stainless Steel Only
Aluminium Only
Pull Handle to Suit
1
712
5
Aluminium
8P1
5*
Stainless Steel
Plates
20000NA
20100NA
20002NN
20006NN
20106NN
20010NA
20007AN
20007CN
20007E N
20007FN
20007NN
20107NN
20001NA
20101NA
20003NN
20004NN
20104NN
20014NN
20020NA
20120NA
20005NN
20105NN
20022NN
20122NN
20139NN
20024NN
20124NN
20025NA
20125NA
20027NN
20127NN
20028NN
20142NN
20031NN*3
20131NN*3
20032NA*3
20132NA*3
20024AN
*3
20024CN
20024EN
20024GN
20013NN
20138NN
20035NN*3
20134NN*3
Recommended for sliding doors only
Plates and Functions Legend
Cylinder Hole
Slotted Button
LED
Turn-Snib
Disabled
Indicating Slotted Button
24
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
202 Series Artefact Round Corner Plate Furniture
Description
The 202 Series Door Furniture is
162mm square with 10mm radius
corners. Concealed fixed plates have
studs with internal threads located in
each corner, visible fixed plates have
corresponding countersunk holes and
are fixed back to back through the
door.
Application
Designed for use with Lockwood
3570 Synergy Series Mortice Locks;
Latches and Push and Pull doors.
162
2
162
Product Details
Standards and Compliance
Dimensions
162 x 162 x 3mm - aluminium
162 x 162 x 2mm - stainless steel and brass
Door Thickness*
35 to 45mm standard. For doors 45 to 55mm thick,
specify long fixing screws SP2000-208.
Fixing
Plates are designed to fit back to back. If outside plate
is specified with concealed fixing, then the inside plate
must be visible fixed.
High durability for maximum
frequency usage.
Standard
Finishes
Natural Anodised Aluminium (NT)
Satin Stainless Steel (SS)
Anti‑Corrosion.
Finishes
Non Standard
Polished Stainless Steel (PS)
Powdercoat (PC)*
316 Marine Grade (MG)
Polished Brass (PB)
3
Handing
All plates are handed with the exception of plain plates
and pull handles.
Materials
Aluminium, brass and stainless steel
Fire Rated.
High security for maximum
protection (AS4145.2:1993).
Note: When using flush pulls back to back the minimum door thickness is 40mm.
48.7
* For the Powdercoat color range, please see the Dulux Powdercoat Range at the
end of this catalogue section.
28.6
2
SS/Brass
3
Aluminium
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
25
1
202 Series Levers and Functions
Levers and Knob to Suit
20*1
88*2
96
98
For lever images and dimensions, see page 15.
*1 Stainless Steel Only
*2 Aluminium Only
Pull Handle to Suit
712
5
Aluminium
8P1
5*
Stainless Steel
Plates
20200NA
20300NA
20202NN
20206NN
20306NN
20210NA
20207AN
20207CN
20207EN
20207FN
20207NN
20307NN
20201NA
20301NA
20203NN
20204NN
20304NN
20205NN
20305NN
20222NN
20322NN
20339NN
20214NN
20213NN
20220NA
20338NN
20320NA
20224NN
20324NN
20225NA
20325NA
20227NN
20327NN
20228NN
20342NN
20224AN
20224CN
20224EN
20224GN
20231NN*3
20331NN*3
20232NA*3
20332NA*3
20235NN*3
20234NN*3
*3 Recommended for sliding doors only
Plates and Functions Legend
Cylinder Hole
Slotted Button
LED
Turn-Snib
Disabled
Indicating Slotted Button
26
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
200/202 Series Ordering Procedure
Sample part number 20001NA/96LSS is made up of several sections.
Choose your product by selecting an option from each section.
Plate Type
200
Plate
Function
01
Engraving
Cylinder
Shape
N
/
A
Plate Type
Plate Function
Exterior Plate (162 x 162)
– Square Corners
200
Plain Plate
07
Pull Handle Only
24
Interior Plate (162 x 162)
– Square Corners
201
Exterior Plate (162 x 162)
– Radius Corners
202
Interior Plate (162 x 162)
– Radius Corners
203
Lever/Knob/
Pull Handle
Handing
96
L
Cylinder Only
00
Cylinder & Lever
01
Emergency Turn Only
02
Emergency Turn & Lever
03
Turn Knob & Lever
04
Lever Only
05
Turn Knob Only
06
Cylinder & Fixed Lever
08
A – G Outlined Infill
R – X Full Infill
Satin Stainless Steel
SS
Polished Stainless Steel
PS
PC
B S
45 7192
Powdercoat
Female symbol
C T
55 7496
316 Marine GradeMG
Female text
D U
55A78 97
Aluminium Finishes
Disabled symbol
E V
607998*1
Natural Anodised
Push text
F W
6579B
98*2
Brass Finishes
Pull text
G X
Polished Brass
Unisex symbol
H Y
AS1428.1 Compliant Levers
No option N
For all in-filled engraving, black gloss
is the standard.
Privacy Indicator
Emergency Turn Only
Cylinder Shape
13
Privacy Indicator
Emergency Turn & Lever
14
Oval Cylinder –
32mm (H) x 18mm (W)
Lockwood 570 Cylinders Privacy Indicator
Turn Knob Only
15
20
6783
A R
10
Cylinder, Fixed Lever & LED 21
Stainless Steel Finishes
32
Male text
09
Privacy Indicator Emergency
Turn & Lower Cylinder
19
Finish
20 6680
Male symbol
Dual Cylinder
16
Lever/ Knob Type
44 7090
Fixed Lever Only
Cylinder, Lever & LED
SS
Engraving - Handed
Plate Function - Handed
Privacy Indicator
Turn Knob & Lever
Finish
NT
PB
598596*2
76
88*2
77
96*
96*3
1
Handed Levers
41 5361
A
Guarded Oval Cylinder –
32mm (H) x 18mm (W)
Lockwood 570 Cylinders
B
No Cylinder Function
N
Pull Handles
P1P1*1
75*2
Pull Handles - Horizontal
HP1HP1*1
H75*2
Handles are brass unless indicated
otherwise
*1 = Stainless Steel
*2 = Aluminium
*3 = 316 Marine Grade
Lever & LED
22
Handing
Cylinder & LED
23
Left Handed L
Pull Handle & Cylinder
25
Right Handed
R
Pull Handle & Emergency Turn
26
Pull Handle & Turn Knob
27
Pull Handle & Privacy
Indicator Emergency Turn 28
Pull Handle & Privacy
Indicator Turn Knob
29
Pull Handle & Dual Cylinder 30
Flush Pull Only
31
Flush Pull & Cylinder
32
Flush Pull & Emergency Turn 33
Flush Pull & Turn Knob
34
Flush Pull & Privacy
Indicator Emergency Turn 35
Flush Pull & Privacy
Indicator Turn Knob
36
Flush Pull & Dual Cylinder 37
Disabled Turn Only
38
Disabled Turn & Lever
39
Privacy Indicating Disabled
Turn Only
40
Pull Handle & Disabled Turn 42
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
27
212 Series Artefact Oval Plate Furniture
Description
The 212 Series Door Furniture is
162mm long x 50mm wide with radius
ends. Concealed fixed plates have
studs with internal threads located top
and bottom, visible fixed plates have
corresponding countersunk holes and
are fixed back to back through the
door.
Application
Designed for use with Lockwood
3570 Synergy Series Mortice Latches.
50
2
Product Details
Dimensions
162 x 50 x 3mm - aluminium
162 x 50 x 2mm - stainless steel and brass
Materials
Aluminium, stainless steel or brass
Door Thickness
35 to 45mm standard. For doors 45 to 55mm thick,
specify long fixing screws SP2000-208
Standard
Finishes
Natural Anodised Aluminium (NT)
Stainless Steel (SS)
Non Standard
Finishes
Polished Stainless Steel (PS)
Powdercoat (PC)
316 Marine Grade (MG)
Polished Brass (PB)
3
162
2
3
SS/Brass
28
Aluminium
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Standards and Compliance
Fire Rated.
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Anti‑Corrosion.
212 Series Levers and Functions
Levers and Knob to Suit
20*1
88*2
96
98
For lever images and dimensions, see page 15.
*1 Stainless Steel Only
*2 Aluminium Only
Pull Handle to Suit
712
5
Aluminium
8P1
5*
Stainless Steel
Plates
21200NA
21300NA
21202NN
21206NN
21306NN
21207NN
21307NN
21210NA
21201NA
21301NA
21203NN
21204NN
21304NN
21205NN
21305NN
21214NN
21220NA
21320NA
21222NN
21322NN
21213NN
21338NN
21339NN
Plates and Functions Legend
Cylinder Hole
Slotted Button
LED
Turn-Snib
Disabled
Indicating Slotted Button
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
29
224 Series Artefact Rectangular Plate Furniture
Description
The 224 Series Door Furniture is
162mm long x 50mm wide with
square ends. Concealed fixed plates
have studs with internal threads
located top and bottom, visible
fixed plates have corresponding
countersunk holes and are fixed back
to back through the door.
Product Details
Dimensions
162 x 50 x 2mm - stainless steel
Materials
Stainless steel only.
Door Thickness
35 to 45mm standard. For doors 45 to 55mm thick,
specify long fixing screws SP2000-208.
High security for maximum
protection (AS4145.2:1993).
Finishes
Stainless Steel (SS)
High durability for maximum
frequency usage.
Application
2
3
162
30
Fire Rated.
Anti‑Corrosion.
Designed for use with Lockwood 3570
Series Mortice Latches.
50
Standards and Compliance
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
224 Series Levers and Functions
Levers and Knob to Suit
20
96
98
For lever images and dimensions, see page 15.
Pull Handle to Suit
P1
Stainless Steel
Plates
22400NA
22500NA
22402NN
22406NN
22506NN
22407NN
22507NN
22410NA
22401NA
22501NA
22403NN
22404NN
22504NN
22405NN
22505NN
22414NN
22420NA
22520NA
22422NN
22522NN
22413NN
22538NN
22539NN
Plates and Functions Legend
Cylinder Hole
Slotted Button
LED
Turn-Snib
Disabled
Indicating Slotted Button
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
31
212/224 Series Ordering Procedure
Sample part number 21201NA/96LSS is made up of several sections.
Choose your product by selecting an option from each section.
Plate Type
212
Plate
Function
01
Engraving
Cylinder
Shape
N
Lever/Knob/
Pull Handle
/
A
Plate Type
Plate Function
Exterior Plate (162 x 50)
– Oval
212
Cylinder Only
00
Cylinder & Lever
01
Emergency Turn Only
02
Emergency Turn & Lever
03
Turn Knob & Lever
04
Lever Only
05
Turn Knob Only
06
Plain Plate
07
Dual Cylinder
10
Interior Plate (162 x 50)
– Oval
213
Exterior Plate (162 x 50)
– Rectangular
224
Interior Plate (162 x 50)
– Rectangular
225
Privacy Indicator
Emergency Turn Only
13
Privacy Indicator
Emergency Turn & Lever
14
Privacy Indicator
Turn Knob Only
15
Privacy Indicator
Turn Knob & Lever
16
Cylinder, Lever & LED
20
Handing
96
SS
Engraving - Handed
Lever/ Knob Type
Finish
A – G Outlined Infill
R – X Full Infill
20 6683
Stainless Steel Finishes
32
Male symbol
A R
Male text
B S
Female symbol
C T
Female text
D U
Disabled symbol
E V
Push text
F W
Pull text
G X
Unisex symbol
H Y
Cylinder Shape
A
B
N
22
Cylinder & LED
23
No Cylinder Function
Satin Stainless Steel
SS
44 7192
Polished Stainless Steel
PS
45 7497
Powdercoat
PC
557898*1
316 Marine GradeMG
55A79 98*2
Aluminium Finishes
6079B
Natural Anodised
6580
AS1428.1 Compliant Levers
76
88*2
77
96*1
2
41 5361
Angled Levers
98A
Pull Handles
P1P1*175*2
Handles are brass unless indicated
otherwise
*1 = Stainless Steel
*2 = Aluminium
Cylinder & Fixed Lever
08
Fixed Lever Only
09
Disabled Turn Only
38
Handing
Disabled Turn & Lever
39
Left Handed L
Right Handed
R
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
NT
Brass Finishes
Handed Levers
Oval Cylinder –
32mm (H) x 18mm (W)
Lockwood 570 Cylinders Lever & LED
6790
598596*
No option N
For all in-filled engraving, black gloss is
the standard.
Plate Function - Handed
32
L
Guarded Oval Cylinder –
32mm (H) x 18mm (W)
Lockwood 570 Cylinders
Cylinder, Fixed Lever & LED 21
Finish
Polished Brass
PB
Detention Series Square Plate Furniture
Description
A heavy duty plate designed for use
in hospitals and detention facilities.
Styled for institutional use, this plate
has six fixing points to ensure that it
is well secured to the door. Plates are
designed to be free of ligature points.
Application
Lockwood 3570 Series Mortice Locks
and Lockwood 3579 Secure Area
Rated Locks.
Product Details
Dimensions
162mm x 180mm x 2mm: base plate
161mm x 75mm x 3mm: bevelled top plate
Door Thickness*
35mm minimum, 45mm maximum
Finishes
Satin Stainless Steel (SS)
High security for maximum
protection (AS4145.2:1993).
Fixing
Six fixing points
220D series plates have concealed fixings
221D series plates have visible fixings
High durability for maximum
frequency usage.
All plates are handed except 220D07 and 220D31,
which are non-handed when ordered without
engraving.
Anti‑Corrosion.
Handing
Materials
Stainless steel
Features and Specifications
•Anti-ligature - Knob 21 & 22
•Covers fixing holes from existing
Artefact 200 Series Furniture
Standards and Compliance
Fire Rated.
*Note: A minimum door thickness of 50mm is required to fit flush pulls
back to back.
•Detention furniture turns feature a
clutching mechanism that allows the
cylinder to retract the bolt even if
the turn knob is held from the inside.
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
33
Detention Series Square Plate Lever/Knobs and Functions
220D00
220D01
220D02
220D03
220D04
220D05
220D06
220D07
220D08
220D09
220D13
220D14
220D15
220D16
220D20
220D21
220D22
220D23
220D24
220D25
220D26
220D27
220D28
220D29
220D31
220D32
220D33
220D34
220D35
220D36
220D56
220D57
220D58
220D59
220D60
220D61
220D62
220D63
220D64
220D65
220D66
220D67
Legend:
Cylinder Hole
Knob/Lever
Fixed Knob/Lever
Turn Snib
Emergency Turn
Privacy Indicator
Turn Snib
Privacy Indicator
Emergency Turn
LED
Pull Handle
Flush Pull
Cylinder guards must be ordered separately. Only the plate functions shown above in red are available with engraving.
Lever and Knob Selection
Standard Knob 21
3
3
Webbed Knob 22
25
Lever 23
33
25
61
33
Ø60
35
ø60
61
35
Ø60
ø60
120
120
34
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Detention Series Rectangular Plate Furniture
Description
This smaller plate range has been
designed for use in detention facilities
such as hospitals where domestic
aesthetics are preferred over
institutional type styling. Plates are
designed to be free of ligature points.
Application
Lockwood 3570 Synergy Series
Mortice Locks and Lockwood 3579
Secure Area Rated Locks.
Features and Specifications
Product Details
Standards and Compliance
Dimensions
162mm x 76mm x 2mm: base plate
161mm x 75mm x 3mm: bevelled top plate
Door Thickness
35mm minimum, 45mm maximum
Finishes
Satin Stainless Steel (SS)
High security for maximum
protection (AS4145.2:1993).
Fixing
Four fixing points
222D series plates have concealed fixings
223D series plates have visible fixings
High durability for maximum
frequency usage.
Handing
Only plates with levers and/ or turn knobs are handed
Anti‑Corrosion.
Materials
Stainless steel
Fire Rated.
•Anti-ligature
•Covers fixing holes from existing 212
Series Artefact Plates
•Detention furniture turns feature a
clutching mechanism that allows the
cylinder to retract the bolt even if
the turn knob is held from the inside
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
35
Detention Series Rectangular Plate Lever/Knobs & Functions
222D00
222D01
222D02
222D03
222D04
222D05
222D06
222D07
222D14
222D15
222D16
222D20
222D21
222D22
222D23
222D24
Legend:
222D08
Knob/Lever
Fixed Knob/Lever
Turn Snib
Emergency Turn
Privacy Indicator
Turn Snib
Privacy Indicator
Emergency Turn
LED
Pull Handle
Flush Pull
Lever and Knob Selection
Standard Knob 21
3
Webbed Knob 22
25
Lever 23
33
25
61
33
Ø60
35
ø60
61
35
Ø60
ø60
120
120
36
222D13
Cylinder Hole
Note: Only plates with levers and/or turn knobs are handed. 223D Series have visible fixings.
3
222D09
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Detention Series – Knobs and Levers
Standard Knob 21
3
25
Description
Simple yet functional, this knob has soft
edges to minimise impact injuries and antiligature features that make it suitable for
use in detention facilities.
Ø60
3
25
Ø60
Webbed Knob 22
33
Description
ø60
The webbed knob combines pleasing
aesthetics, comfortable grip and antiligature features to provide a solution for
any environment.
33
ø60
Lever 23
Description
Ergonomically designed to maximise
grip, the detention lever is suitable for
use in hospitals and minimum security
applications. It caters especially for the
elderly or people with arthritic conditions.
61
61
35
35
120
120
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
37
Detention Series – Turns
3
Emergency Turn
42
Turn Knob
42
3
Indicating Emergency Turn
42
Indicating Turn Knob
42
38
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Detention Series – Pulls
121
Flush Pull
Description
The detention flush pull has been designed
to maximise grip and eliminate the
possibility of hiding objects in the cavity.
35
27
151
Standard Pull
40
Description
The detention pull allows for a firm grip
and can be used to open heavy doors. Also
designed to be free of hanging points.
R10
161
30
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
39
Detention Series – Accessories
Cylinder Guards
Part Number
Door Thickness Suitability
220D00/40SS
Suit doors 35-40mm
220D00/45SS
Suit doors 35-40mm
220D00/50SS
Suit doors 35-40mm
220D00/55SS
Suit doors 35-40mm
220D00/60SS
Suit doors 35-40mm
Description
Cylinder guards must be fitted with any
cylinder plate function. Guards are available
to suit different door thicknesses.
Fixing Screws
Part Number
Description
Door Thickness Suitability
220D11/45
Torx Anti-tamper Screws
35 - 45mm
220D11/55
Torx Anti-tamper Screws
45 - 55mm
220D11/65
Torx Anti-tamper Screws
55 - 65mm
220D12/45
Standard Screws
35 - 45mm
220D12/55
Standard Screws
45 - 55mm
220D12/65
Standard Screws
55 - 65mm
220D13/50
Snake-eye Screws
35 - 50mm
Description
Torx anti-tamper, snake-eye and standard screws are available in accessory
packs to suit different door thicknesses. Only standard screws to suit doors
35mm – 45mm thick are supplied with furniture. Other variations need to be
ordered separately using part numbers specified.
All accessory packs contain six screws for the six mounting points per plate.
40
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Detention Series Ordering Procedure
Sample part number 220D01NA/21LSS is made up of several sections.
Choose your product by selecting an option from each section.
Plate
220
Function
D
01
Engraving
Options
Cylinder
Options
N
/
A
Plate
Function cont.
Concealed Fix
162mm x 180mm
Pull Handle and Turn Snib 27
220
Visible Fix
162mm x 180mm
Pull Handle and Privacy
Indicator Emergency Turn 28
221
Concealed Fix
162mm x 76mm
Pull Handle and Privacy
Indicator Turn Snib
29
222
Flush Pull Only
31
Visible Fix
162mm x 76mm
223
Flush Pull and Cylinder
32
Flush Pull and
Emergency Turn
33
Flush Pull and Turn Snib
34
Function
Cylinder Only
00
Cylinder and Lever/Knob
01
Emergency Turn Only
02
Emergency Turn and Lever 03
Turn Snib and Lever/Knob 04
Lever/Knob Only
05
Turn Snib Only
06
Plain Plate
07
Cylinder and Fixed
Lever/Knob
08
Fixed Lever/Knob Only
09
Privacy Indicator
Emergency Turn Only
13
Privacy Indicator Emergency
Turn and Lever/Knob
14
Flush Pull and Privacy
Indicator Emergency Turn 35
Flush Pull and
Privacy Indicator Turn Snib 36
Pull Handle and
Knob/Lever
56
Pull Handle, Cylinder and
Knob/Lever
57
Flush Pull and Cylinder and
Lever/Knob
63
23
Pull Handle Only
24
Pull Handle and Cylinder 25
Pull Handle and
Emergency Turn
26
Male Symbol
Male Text
Female Symbol
Female Text
Disabled Symbol
Push Text
Pull Text
Unisex Symbol
No Option
Knob
A
R
BS
CT
DU
E
V
F
W
G
X
H
Y
N
For all in-filled engraving, black
gloss is the standard.
A-G Outlined Infill
R-X Full Infill
Finish
Standard Knob
21
Webbed Knob
22
Lever - Handed
Lever
23
Handing
Left Handed
L
Right Handed
R
Satin Stainless Steel
SS
Note: Cylinder guards must
be ordered with all cylinder
function plates. All turn
snib functions are supplied
with tailbars and clutching
mechanisms as standard.
Cylinder Options
Australian Oval A
No Cylinder
N
No Cylinder / No Tail BarNN
Pull Handle, Privacy Indicator
Turn Snib and Knob/Lever 61
16
Cylinder and LED
SS
Pull Handle, Privacy Indicator
Emergency Turn and
Knob/Lever
60
Flush Pull and Lever/Knob 62
22
L
Pull Handle, Turn Snib and
Knob/Lever
59
15
Lever/Knob and LED
21
Finish
Pull Handle, Emergency Turn
and Knob/Lever
58
Privacy Indicator Turn
Snib and Lever/Knob
Cylinder, Fixed Lever/Knob
and LED
21
Handing
Engraving Options
Privacy Indicator
Turn Snib Only
Cylinder, Lever/Knob and LED20
Lever/
Knob
Flush Pull and Emergency Turn
and Lever/Knob
64
Flush Pull and Turn Snib and
Lever/Knob
65
Flush Pull and Privacy
Indicator Emergency Turn
and Lever/Knob
66
Flush Pull and Privacy Indicator
Turn Snib and Knob/Lever 67
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
41
Palladium® Series Furniture
The exceptional range of Palladium Door Furniture offers builders, specifiers
and interior designers an array of levers that can be used in any residential
environment.
The Palladium Series of door furniture reflects the best in quality, blended with
sophisticated designs. The Palladium Series was produced to meet the rigorous
aesthetic requirements of residential markets, while conforming to the ever
increasing need for quality semi-commercial building segments.
Available in Palladium and Palladium Xtra versions to suit a wide range of
applications.
Summit® L1
Spire® L2
Element™ L3
Glide™ L4
Aria® #27
Hakea® #28
Acacia® #29
Saltbush® #34
Mulga® #36
Gidgee® #37
42
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Palladium® Series Door Furniture
Description
The Palladium Series represents the
highest standard in residential and
semi-commercial door hardware and
is brought to you through modern
innovative designs, combined with
quality manufacturing. A wide range
of lever options is available to enable a
common style throughout the home.
Product Details
Dimensions
222 x 30 x 9mm
Door Thickness
Minimum 32mm - maximum 45mm door thickness.
Finishes
Satin Chrome Pearl (SP)
Chrome Plate (CP)
Gold Plate (GP)
Black (BLK)
Polyester Powdercoat (PPC)
(Specify Dulux Color)
Fixing
Lockwood Palladium Series Door Furniture is a
complete set, supplied with both the internal and
external plates. Plates are designed to fit back to back to
be fully concealed externally.
Handing
Easy, field selectable handing.
Materials
All plates and levers in the Palladium Series are
constructed from solid zinc die-cast.
Keying
Use with Euro profile cylinder
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
43
Palladium® Series Door Furniture
85mm Plates and Functions
For use with Optimum Mortice Locks
85
PL2/85/##
PL3/85/##
2/85
3/85
PL4/85/##
4/85
Note: The internal single cylinder configuration is also used in the Palladium French Door kits
(PLFD/85/##) only in this configuration the external lever is fixed.
No Pitch Plates
For use with passage functions.
PL1/00/##
PL5/00/##
1/00
4/00
### Represents lever style number.
30
222
2/85
44
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Palladium® Xtra Door Furniture
Description
The Palladium Xtra Series is designed
specifically for the Optimum range of
mortice locks to increase functionality
enabling both internal snibbing for
safety mode and lock status indication.
Palladium Xtra is suitable for use in
residential buildings, apartments and
semi-commercial applications.
Keying
Product Details
Standards and Compliance
Dimensions
222 x 30 x 9mm
Door Thickness
Minimum 32mm - maximum 45mm door thickness.
Finishes
Satin Chrome Pearl (SP)
Black (BLK)
Chrome Plate (CP)
Polyester Powdercoat (PPC)
Fixing
Lockwood Palladium Xtra door furniture is a complete
set, supplied with both the internal and external
plates. Plates are designed to fit back to back to be fully
concealed externally.
Handing
Easy, field selectable handing.
Materials
All plates and levers in the Palladium Series are
constructed from solid zinc die-cast.
Use with Euro profile cylinder.
Fire Rated.
High security for maximum
protection (AS4145.2:1993).
High durability for maximum
frequency usage.
Anti‑Corrosion.
85mm Plates and Functions
30
222
PX4/85/##
4/85
### Represents lever style number.
2/85
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
45
Palladium® Series Door Furniture
Summit® L1
30
Hakea® #28
61
32-45
61
30
66
32-45
66
222
222
113
110
Acacia® #29
Spire® L2
30
61
32-45
30
61
60
32-45
60
222
222
115
111
Saltbush® #34
Element™ L3
30
58
32-45
30
58
68
32-45
68
222
110
46
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
222
109
Palladium® Series Door Furniture
Mulga® #36
Glide™ L4
30
60
32-45
60
30
67
32-45
67
222
222
113
109
Aria® #27
30
Gidgee® #37
52
32-45
52
30
57
32-45
57
222
222
112
113
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
47
Palladium® Series Ordering Procedure
Sample part number PL4/85/34SC is made up of several sections.
Choose your product by selecting an option from each section.
Palladium
Platform
Name
Function
PL
Pitch
/
4
Platform Name
85
Lever
/
Finish
34
SP
Pitch
Palladium
PL
Function
Finish
Lever Only
00
Chrome Plate
85mm Pitch
85
Gold Plate
Satin Chrome Pearl
Passage Set
1
Lever
External Single Cylinder
2
Summit
L1
Internal Single Cylinder
3
Spire
L2
Double Cylinder
4
Element
L3
Fixed Dummy
5
Glide
L4
French Door
FD
Aria
27
Hakea
28
Acacia
29
Saltbush
34
Mulga
36
Gidgee
37
CP
GLD
SP
Black
BLK
Polyester Powder Coat
PPC
Palladium Xtra
Platform
Name
PX
Function
Pitch
/
4
Platform Name
Palladium Xtra
48
/
Finish
34
SP
Pitch
PX
Function
Double Cylinder
85
Lever
85mm Pitch
Finish
85
Black
Lever
4
Satin Chrome Pearl
Chrome Plate
Summit L1
Spire
L2
Element
L3
Glide
L4
Aria
27
Hakea
28
Acacia
29
Saltbush
34
Mulga
36
Gidgee
37
Polyester Powder Coat
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
SP
BLK
CP
PPC
Diecast Levers
For use on the following door furniture series:
Diecast Levers
L1
L2
L3
L4
28
34
Velocity Large Rose
X
X
X
X
X
X
Velocity Small Rose
X
X
X
X
X
X
X
Daintree Series
X
X
X
X
X
X
X
X
X
X
Palladium
X
X
X
X
X
X
X
X
X
X
Nexion
X
X
X
X
X
X
X
X
X
X
Hakea® #28
37
27
29
36
L5
29A
X
X
121
110
Part Number
#28
Length
121mm
Projection
62mm
Finger clearance
42mm
13
22
50
*Design Registered Australia/New Zealand.
122
Acacia® #29
111
Part Number
#29
Length
122mm
Projection
56mm
Finger clearance
41mm
18
15
44
*Design Registered Australia/New Zealand.
Saltbush® #34
120
109
Part Number
#34
Length
120mm
Projection
64mm
Finger clearance
41mm
7
30
52
*Design Registered Australia/New Zealand.
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
49
Diecast Levers
Aria® #S27
123
112
Part Number
#S27
Length
123mm
Projection
48mm
Finger clearance
36mm
18
10
36
36
12
*Design Registered Australia/New Zealand.
Mulga® #36
123
Part Number
#36
Length
123mm
Projection
63mm
Finger clearance
47mm
114
16
30
51
*Design Registered Australia/New Zealand.
122
Gidgee® #37
113
Part Number
#37
Length
122mm
Projection
53mm
Finger clearance
37mm
16
35 41
*Design Registered Australia/New Zealand.
124
Summit® #L1
114
Part Number
#L1
Length
124mm
Projection
57mm
Finger clearance
37mm
*Design Registered Australia/New Zealand.
50
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
11
24
45
Diecast Levers
126
Spire #L2
115
Part Number
#L2
Length
126mm
Projection
57mm
Finger clearance
41mm
19
21
45
*Design Registered Australia/New Zealand.
Element™ #L3
122
Part Number
44
Length
125mm
Projection
59.5mm
Finger clearance
42mm
110
23
7
42
*Design Registered Australia/New Zealand.
121
Glide™ #L4
110
Part Number
#L4
Length
121mm
Projection
56mm
Finger clearance
34mm
*Design Registered Australia/New Zealand.
8
23
44
34
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
51
Brass Furniture Thicker Door Accessories
Lockwood brass door furniture is suitable use across a wide range of door
thicknesses. In certain applications longer screws, spindles and turnsnib
tailbars may be required.
Screws
A
B
Screws
Part Number
Pack
Size
Length (A)
Threaded
Length (B)
Door Thickness
Min
Max
SPA20-V3 NSS
20
SP0655MBK
10
65mm
40mm
32mm
50mm
75mm
40mm
42mm
60mm
SP1800-608ZP
10
120mm
75mm
52mm
105mm
SP1800-208SS
10
215mm
125mm
97mm
200mm
Note: Item shown is red is the standard screw that is supplied with furniture.
Consideration should be given to screw finish on furniture platforms
featuring visible fixing.
Mortice Lock Spindles
A
Mortice Lock Spindles
Part Number
Pack
Size
Length (A)
Door Thickness
Min
Max
SP3570-5018
10
33mm
35mm
50mm
SP3570-5228
10
45mm
50mm
75mm
SP3570-5238
1
58mm
75mm
100mm
Note: Item shown is red is the standard screw that is supplied with furniture.
In thicker door scenarios when Lockwood Brass Door Furniture is used
with Lockwood Synergy Series Mortice Locks longer spindles may be
required.
Turnsnib Tailbars
The door thickness range for a turnsnib tailbar will depend on whether
the turn is in a cylinder and turn configuration or a privacy (turn and turn)
configuration
Turnsnib Tailbars
Part Number
Pack Size
Length
SP571-38ZP
10
47mm
SP571-138ZP
1
98mm
Note: Item shown is red is the standard tailbar that is supplied with furniture.
52
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Lockwood Door Furniture Handing Convention
Applicable for All Handed Furniture
Door Opening In
Left Hand
Lever Assembly
Inside
Right Hand
Lever Assembly
Right Hand Door
Left Hand Door
Right Hand
Lever Assembly
Left Hand
Lever Assembly
Outside
Door Opening Out
Inside
Right Hand
Lever Assembly
Left Hand
Lever Assembly
Right Hand Door
Left Hand Door
Right Hand
Lever Assembly
Outside
Left Hand
Lever Assembly
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
53
Combination Finish Selection Guide
1 Trim
The following door furniture series are available in
2 Plate
combinations finishes:
2 Plate
• 1220 Series
• 1420 Series
• 1800 Series
• 2800 Series
3 Lever
3 Lever
Lever Handle Set
Escutcheons
1 Rose
2 Retainer
Round Escutcheon*
1 Rose
3 Lever
2 Retainer
Blank Rose
Mortice Lock and Latch Set
1 Rose
Plate Furniture*
2 Retainer
2 Plate
Turnknob
1 Rose
2 Retainer
3 Turnknob
3 Lever
Emergency Release
1 Rose
1 Rose
2 Retainer
2 Retainer
1 Rose
3 Turnknob
3 Emergency Turnknob
2 Retainer
* Consideration should be given to cylinder colour.
1 Rose
2 Retainer
1 Rose
2 Retainer
3 Turnknob
54
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
1 Rose
Combination Finish Selection Guide
Finish Options
Finish Combinations
Where PC indicated, nominate colour selected.
F02
PC / PB / PC
F03
CP / PB / CP
F04
PC / CP / PC
F05
PB / CP / PB
F07
PB / PC / PB
F08
CP / PC / CP
F09
SB / SC / SB
F10
SC / SB / SC
F15
SC / PB / SC
F16
SC / PC / SC
F19
CP / PC / CP
F22
PB / SC / PB
F23
PB / SB / PB
F25
PC / SC / PC
F27
PC / SB / PC
F30
SB / PB / SB
F31
SB / PC / SB
F32
SB / CP / SB
F38
CP / SC /CP
F40
CP / SB / CP
F64
SC / CP / SC
F65
PC / SC / SC
F67
PC / PB / PB
F70
CP / PB / PB
F71
CP / CP / SC
F72
CP / PB / SC
F73
PB / PB / CP
F74
PB / CP / CP
F75
SC / PB / PB
F83
PB / SC / SC
When selecting a colour option from the Symphony
finish combination table, please refer to the following
code to establish your preferred finish selection.
Retainer/ Lever/
Plate
Turn
Rose
1
2
3
Lever Handle Set
F03 =
CP
/
PB
/
CP
Plate Furniture
F03 =
N/A /
PB
/
CP
Escutcheon
F03 =
CP
/
PB
/
N/A
Round Escutcheon
F03 =
CP
/
PB
/
CP
Blank Rose
F03 =
CP
/
PB
/
CP
Turnknob
F03 =
CP
/
PB
/
CP
Emergency Release
F03 =
CP
/
PB
/
CP
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
55
Dulux Powdercoat Range
Colour Swatches
50279
Dulux Wedgewood Satin
33344
Dulux Horizon Blue Gloss
36603
Dulux Azure Grey Satin
32786
Dulux APO Grey Satin
81880
Dulux Pearl White Gloss
36858
Dulux Oyster Matt
33704
Dulux Tropics Gloss
33662
Dulux Pottery Satin
32774*
Dulux Claret Satin
32999*
Dulux Charcoal Gloss
33149
Dulux Red Earth Gloss
51032
Dulux Old Mauve Satin
32694*
Dulux Black Gloss
19319*
Dulux Black Matt
19930*
Dulux Anodic Bronze Satin
50068*
Dulux Deep Brunswick
Green Gloss
52052*
Dulux Precious Pearl
Gloss
18796*
Dulux Charcoal
Met Pearl Gloss
51275
Dulux Anotec Dark
Grey Matt
32538
Dulux Stone Beige Matt
The colours represented on this chart are as close to the
actual colours as modern printing processes allow.
* Technical advice should be sought, where severe ultraviolet
exposure conditions exist.
Note: Consideration should be given to match cylinder finish.
Dulux Lock Bronze Powdercoat recommended as an alternative
to the discontinued Florentine Bronze Plated Finish.
56
Lockwood Product Catalogue Door Handles | Plate Door Handles | 2014-08
1300 LOCK UP (1300 562 587) lockweb.com.au
Lockwood is the leading brand in the Australian locking
industry. With an established reputation for high quality
products, this iconic brand provides a wide range of
locking solutions to residential housing, commercial
building and industrial application markets. Lockwood
is supported by an extensive distribution and aftersales support network. Our customers include retailers,
architects, trade and industrial personnel, locksmiths and
security dealers.
ASSA ABLOY is the global leader in door opening
solutions, dedicated to satisfying end-user needs for
security, safety and convenience.
ASSA ABLOY is represented in all major regions,
in both mature and emerging markets, with leading
positions in Australia, Europe and North America.
The Lockwood 25 Year Mechanical Warranty
Our belief that we manufacture the finest premium
products available in today’s market place is backed by
the Lockwood 25 Year Mechanical Warranty, ensuring
that Lockwood continues to keep Australians safe by
delivering security and peace of mind.
For warranty terms and conditions, please visit
www.lockweb.com.au or call 1300WARRANTY
ASSA ABLOY Australia Pty Ltd
235 Huntingdale Road
Oakleigh, Victoria, 3166
Australia
1300 LOCK UP (1300 562 587)
lockweb.com.au
ASSA ABLOY New Zealand Ltd
6 Armstrong Road
Albany, Auckland, 0632
New Zealand
info.nz@assaabloy.com
Telephone +64 9415 7111
assaabloy.co.nz
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2014