1. business and industrial
2. metals

Louis Benton Steakhouse, Grand Rapids, MI | McGraw Construction 2010
Custom Wire Mesh Grilles | Style #212 press crimp, square wire,
manufactured and custom fit by Klise Mfg.
Since 1910
Century Furniture, Hickory, NC | Consulate Collection
Fontaine Credenza & China Deck | www.centuryfurniture.com
Klise Custom Wire Mesh Grille | reeded, flat wire.
Custom Hand-crafted
Wire Mesh Grillework
Natural Elements Cabinetry of West Michigan
Custom Kitchen Cabinetry | www.naturalelementswm.com
Custom Wire Mesh Grilles | Style #311 press crimp, flat wire.
Grabill Cabinet Company, Grabill, IN
www.grabillcabinets.com
Custom brass wire inlay in
kitchen cabinet mullion door.
For over  years...
Since 1910
With more than 100 years of experience, Klise continues to be a leading manufacturer of
high-quality decorative lineal wood mouldings and inserts
serving the design-build community for commercial and
residential projects. Klise also maintains a significant
design presence with leading manufacturers in the kitchen
cabinet and high-end furniture markets, providing
solutions for traditional and transitional design trends.
Handcrafted wire mesh
With the introduction of customized, hand-crafted wire
mesh grillework, Klise now provides an additional way
to distinguish and enhance cabinetry, wine cellars,
furniture and other architectural designs.
Insignia Homes,
s,
s,
Grand Rapids, MII
2013 Parade of Homess
British-Colonial Bath Cabinett
Style #304 single crimp,
p,,
square orientation
n
Design
Klise Desig
gn
g
n Concept
Conc
C
oncept
oncep
c p
ptt
Custom Light Cover
1⁄16˝x 3⁄16˝ flat wire
When designing your next project, consider adding
unique or classically inspired wire mesh grilles, formed
wire or other custom metal fabrications. Our factory
artisans have over four decades of experience in producing
intricate, American-made metalwork and can provide
a wealth of creative suggestions and design ideas to
distinguish any project.
Finishing Options
For most grills, wire material and style is selected, crimped
and hand-woven to customer specifications. It is then
electroplated with the selected finish option. A final high
grade lacquer spray coating is applied for durability.
Due to the hand-crafted nature of this product, there will
be minimal color variations within an order which adds to
the unique character of the product. Final product may
vary from samples or from order to order and exact color
matches cannot be guaranteed. For critical matching,
unfinished grills may be ordered and finished locally to
enable final on site inspection.
• Standard electroplating options include Brass, Copper
and Steel. Additionally, Chrome, Nickel, Pewter and
Bronze are also available.
Klise Design Concept Wine Rack
Style #203 single crimp,
3⁄4˝ mesh, 1⁄16˝ square wire
• Standard finishes include Antique, Satin and Bright
with special glazing effects also available.
• Plain steel or solid brass wire grilles are also available
without electroplating or finishing effects.
Accents
Rosettes and cones can be tack-welded to wire joints for
that unique addition. They are available in any electroplate or finishing effect. Shown below in brass with other
styles and types available for special order.
#16 ESCUTCHEON
PIN
Sacred Heart of Jesus, Grand Rapids, MI
Style #311 press crimp, flat wire,
custom spacing, size & radius
custom metal framing
CLOVERLEAF
1-1/16"
6005
3/16"
1533
3/8"
2002
7/16"
#4 CONE
7/16"
1039
9/16"
#6 CONE
9/32"
STYLE 101: SINGLE CRIMP | ROUND WIRE
3/8”, 1/2” mesh use .050” wire,
5/8”, 3/4” mesh use 1/16” wire.
STYLE 111: PRESS CRIMP | ROUND WIRE
1/2”, 5/8”, 3/4” mesh use 1/16” wire. 1” mesh use
1/16” or 3/32” wire; larger to 3-1/2” use 3/32” wire.
STYLE 211: PRESS CRIMP | SQUARE WIRE
Mesh sizes from 1/2” to 4”. 1/2”, 5/8”, 3/4” mesh
use 1/16” wire; 1”, 1-1/4”, 1-1/2” and up use 1/16”
or 3/32” wire.
STYLE 201: SINGLE CRIMP | SQUARE WIRE
1/2”, 5/8”, 3/4” mesh use 1/16” wire.
STYLE 112: PRESS CRIMP | ROUND WIRE
Two or more opening sizes. Using wire-to-wire
measurements, can be any multiple of the close
wires’ opening size. 5/16” & 1-1/8” mesh or 1/2” &
1-1/2” mesh use 1/16” wire; Larger multiples
use 1/16” or 3/32” wire. Other variations available.
STYLE 303: CANED WIRE MESH GRILLE PATTERN
1/2” or 5/8” mesh use .050” wire; 3/4” mesh use
1/8” wire. Mesh spacing measured center of crimpto-crimp contains both single crimped wires and
straight cross wires.
STYLE 212: PRESS CRIMP | SQUARE WIRE
5/16” & 1-1/8” or 1/2” & 1-1/2” combinations, or
any combinaion in multiples of 1/2” or 5/8”.
Using wire-to-wire measurements, the large
opening can be any multiple of the close wires’
opening size. 5/16” & 1-1/8” mesh use 1/16” wire,
larger multiples use 1/16” or 3/32” wire.
STYLE 221: DOUBLE CRIMP | SQUARE WIRE
3/4” mesh use 1/16: wire; 1”, 1-1/8”, 1-1/4”,
1-1/2” mesh use 1/16” or 3/32” wire; larger up
to 2-1/4” use 3/32” wire.
STYLE 322: DOUBLE CRIMP | FLAT WIRE
With 1/16” x 1/8” plain flat wire, 1/2” & 1-1/2” mesh.
STYLE R322: DOUBLE CRIMP | REEDED WIRE
With 1/16” x 1/8” reeded wire, 1/2” & 1-1/2” mesh.
STYLE 301: SINGLE CRIMP | FLAT WIRE
1/2” mesh use .040 x 1/8“ wire; 5/8” mesh use
.040 x 1/8” or 1/16” x 1/8” wire. 3/4” maximum
spacing.
INSET: Also available in reeded wire (STYLE R301).
Please note: Grilles are shown in various colors including; Brass, Steel, Copper and Bronze. However, all grills are available in any electroplating and finishing effect. See “Finishing
Options” for more information. *Actual Finishes will vary significantly from photos shown. Most images shown in diamond patterns – also available in square orientation.
STYLE R321: DOUBLE CRIMP | REEDED WIRE
1/6” x 1/8” reeded wire. Mesh sizes from 1” to
2-1/4”.
INSET: Also available in flat wire (Style #321).
STYLE 121: DOUBLE CRIMP | ROUND WIRE
3/8”, 1/2” mesh use .050 wire; 5/8” mesh use .050
or 1/16” wire; 1” to 2-1/4” use 1/16“ or 3/32” wire.
STYLE 325: DOUBLE CRIMP | WIRE COMBINATION
Double crimp; any combination of round and flat
wire; any combination of 2 or more mesh sizes;
e.g., 1/2” & 1-1/2” mesh with 1/16” x 1/8” flat wire
and 1/16” round wire.
STYLE 122: DOUBLE CRIMP | ROUND WIRE
Two or more opening sizes. Using wire-to-wire
measurements, the large opening can be any
multiple of the close wires’ opening size. 1/4” x
3/4” mesh use 1/16“ wire; 1/3” & 1”, 1/2” & 1-1/2”,
3/4” & 2-1/4” and up use 1/16” wire.
STYLE 503
CUSTOM FORMED. Minimum opening size: 2-1/4”
x 4-1/2”. 3/32” square wire, or various sizes of flat
wire. Many pattern design variations possible,
as are wire opening sizes and pattern repeat.
Detailed drawing required with full dimensional
repeat.
STYLE 304 (Square): SINGLE CRIMP | FLAT WIRE
1/2”, 5/8” or 3/4” mesh; 1/16” x 1/8” or
1/16” x 3/16” wire recommended.
STYLE 222: DOUBLE CRIMP | SQUARE WIRE
5/16” & 1”, 3/8“ & 1-1/8”, 1/2” & 1-1/2” mesh use
1/16“ wire; 3/4” & 2-1/4” mesh and larger use
3/32” wire.
STYLE 311: PRESS CRIMP | FLAT WIRE
Mesh sizes from 3/4” to 2” and above in multiples of
1”. 3/4” mesh use .040 x 1/8” wire; 1” mesh use 1/16”
x 1/8” or 1/16” x 3/16” wire; 1-1/4” – 1-1/2” mesh use
1/16” x 1/8” wire; 2” & up use 1/16” x 1/8” or 1/16” x
3/16” wire. Specify rosettes if desired – 1“ up to 1-1/2”
mesh at alternate intersections only.
INSET: Also available in reeded wire (Style #R311).
STYLE 600
CUSTOM FORMED. Many variations possible.
Detailed drawing required with full dimensional
pattern repeat and possible rosette information.
Send templates for arch cuts and other special
piece cuts. Available with wire frame border.
5
STYLE 605
e.
CUSTOM FORMED. Many variations possible.
al
Detailed drawing required with full dimensional
n.
pattern repeat and possible rosette information.
er
Send templates for radius and other
s.
mounting details.
STYLE 522
CUSTOM FORMED, with bracket clips. Many variations
possible. Detailed drawing required with full dimensional
pattern repeat information. Send templates for specific
reveal and mounting details.
Wire meshes.
Meshes can be made in square,
diamond or elongated diamond
styles. Please specify which mesh
style you require, or provide a
simple sketch or diagram.
ELONGATED
DIAMOND 
VERTICAL
ORIENTATION
SQUARE
DIAMOND
Wire styles.
Different types of wire may be
mixed, such as 1/8” reeded wire
woven with 1/16” round wire as
shown here.
STYLE 540
CUSTOM FORMED. Minimum opening size:
2-1/4” (measured point-to-point on diagonal).
There are many pattern variations possible, as
are wire opening sizes and pattern repeat.
Detailed drawing required with full dimensional
pattern repeat.
STYLE 660
CUSTOM FORMED. 1/16” x 1/8”, 3/16” x 1/16” or
1/16” x 1/4” wire recommended. Many oblong
oval pattern variations possible, as are wire opening sizes and pattern repeat. Detailed drawing
required with full dimensional pattern repeat.
Custom designs.
If you have a need for decorative
metal pieces, let Klise help.
Finished pieces are ready for
installation and are of the finest
furniture quality.
Other custom metal options:
• Wine Racks
• Display Racks
• Storage Racks
• Wire Shelving
• And more...
STYLE 403: LARGE MESH | WITH ROSETTES
STYLE 525: CUSTOM HEX PATTERN | REEDED WIRE
CUSTOM FORMED. Opening sizes and wire
sizes are optional. Detailed drawing required with full dimensional pattern repeat and
rosette information.
CUSTOM FORMED. Many variations possible.
Detailed drawing required with full dimensional
pattern repeat information. Send templates for
specific reveal and mounting details.
20140910vC
Ordering information.
To place an order or request a quotation, please ask for a copy of our Specifying
Guide Decorative Custom Wood Moulding & Decorative Custom Metalwork or be
sure to supply the following information:
•
•
•
•
•
•
•
•
•
•
Pattern (style) number
Mesh opening size(s), wire-to-wire, center-to-center
Direction of pattern (i.e. diamond, square, etc.)
Wire size & style (round, square, flat, plain, reeded)
Electroplating and finishing effect
Number of pieces and their size(s) (overall outside dimension)
Rosettes, cones or clips & positioning
Frame width, if applicable
Rabbet width, if applicable
Submit sketch or drawing for clarification
Benchmark Wood Studio,
Holland, MI
Bathroom Cabinet
Style #403 flat wire, diamond
shape, with #1533 rosettes
Contact Klise to receive our detailed
custom ordering guidebook,
Specifying Guide,
Decorative Custom Wood Moulding
& Decorative Custom Metalwork
For CUSTOM FORMED grille style #s 403, 503, 522, 525, 540, 600, 605, 660
and other custom grilles, a detailed drawing, showing all dimensions, pattern
repeats, mounting tabs and rosette placement may be required.
Installation information.
Wire Styles & Sizes:
Our wire mesh grilles are hand-woven to customer specifications. Wire meshes are
not welded, but are held together by the interlocking effect of weaving. As a result,
the nature of the grille is to be somewhat flexible, and during shipping and handling
are likely to change shape and appear to be the wrong size. A simple compression
or scissoring motion will return the grill to its original length and width. Tolerances
for unframed grilles are - 0˝, +1⁄8˝in width and - 0˝, +1⁄4˝ in length. Metal framed
grille tolerances are - 0˝, +1⁄8˝ for both dimensions. Excess wire may be trimmed
for final mounting taking care to trim sides equally to maintain symmetry. If ordered,
rosettes are tack welded, “freezing” the shape. Grilles with rosettes are not
adjustable.
ROUND WIRE
.050", 3/32", 1/16"
and 1/8" diameters
SQUARE WIRE
1/16" and 3/32"
FLAT PLAIN WIRE
1/16" x 1/8", 1/16" x 3/16",
1/16" x 1/4", 1/16" x 3/8",
1/16" x 1/2", and 1/16" x 3/4"
REEDED WIRE
(one side only)
1/16" x 1/8", 1/16" x 3/16",
1/16" x 1/4", 1/16" x 5/16",
and 1/16" x 3/8"
Mesh Weave Crimp Styles:
flat wire
SINGLE CRIMPED
Shown are the three basic crimp styles used
in mesh weave configurations (inset shows
flat wire vs round wire).
Special attaching provisions for nail holes,
mounting tabs or matching metal frames
can be supplied. Please supply a sketch or
drawing of details.
flat wire
DOUBLE CRIMPED
DISTRESSED WIRE
(one side only)
1/16" x 3/8" and 1/16" x 1/2"
Also Available:
• Expanded metal sheets
• Perforated metal sheets
• Wire cloth
flat wire
PRESS CRIMPED
Most wire grilles are made with steel
wire and finished to customer specifications. At additional cost, tempered
brass wire may be substituted to
resist denting and for permanency of
configuration.
If you have any further questions, please contact the
Klise Sales Department at 616-459-4283.
20140910vC
Klise is a member of these fine organizations:
I NS T I T UTE OF C L AS SI C AL
ARCHITECTURE & ART
Since 1910
Klise products
featured on
www.houzz.com/pro/klise
601 Maryland Ave. NE
Grand Rapids, MI 49505
P: 616-459-4283 | F: 616-459-4062
www.klisemfg.com
Quality Products
Proudly Made
in the U.S.A.
Visit our website to see our complete
line of custom design options
and popular stock products.
Since 1910
Klise custom formed Asian Tropical Wire Grill
ADEX Platinum Award Winner
Design Journal Magazine (adexawards.com)