1. No category

Konsultprofil - Henrik Nygren
• INTRODUKTION
Henrik har med över 16 års erfarenhet inom mekanisk produktutveckling och verkat inom flera
olika branscher skaffat sig gedigna kunskaper om hur man lyckas med att utveckla och
industrialisera nya produkter. Han har även arbetat med att sänka utvecklingskostnader genom
införandet av effektiv utvecklingsmetodik. Sedan avslutad examen år 1999 har han bland annat
arbetat med utveckling av fordon, konsumentprodukter och elektronikskåp för utomhusbruk.
Han bor på Ekerö tillsammans med fru och två döttrar. Fritiden spenderas till största del
tillsammans med familj och vänner. En annan fritidssysselsättning som han ägnar mycket tid åt är
att renovera sitt hus. När tid finnes, så tar han gärna en löparrunda eller en tur på längdskidor.
Han arbetar systematiskt, målmedvetet och är som person positiv och lätt att samarbeta med.
• KOMPETENSOMRÅDEN
- Senior Produktutvecklare /
Mekanikkonstruktör
- Plastkonstruktion
- Konstruktion av formbunda detaljer
- Metodutveckling CAD
• METODER OCH VERKTYG
Catia V5.
Masters best practice modeling with techniques such as Core/cavity, Chuncky modeling and
multibody modeling.
Catia V4
SolidWorks
Unigraphics
SmarTeam-PDM
Enovia-PDM
Teamcenter-PDM
DFA/DFM/FMEA
ProE/Wildfire 5
Windchill-PDM
• UTBILDNING
- Master of Science, Mechanical Engineering 180p, Royal Institute of Technology (1994-1999)
- Exhangestudent, University of Wisconsin, Madison (1996-1997)
- Bachelor of Science, 80p, Royal Institute of Technology, Gotland (1993-1994)
- Teknisk linje, Gymnasiet, Säveskolan, Visby (1990-1993)
BEROTEC AB
STOCKHOLM
• SPRÅKKUNSKAPER
- Svenska - modersmål
- Swedish - Mother tounge
- Engelska - mycket god i tal och text
- English - Fluent
Sida 1/3
Kontakt:
Magnus Lindman
TELEFON: +46 (0)771-44 11 11
E-MAIL: info@berotec.se
WEBB: www.berotec.se
Konsultprofil - Henrik Nygren
• ANSTÄLLNINGAR
- Mechanical Engineer, Henrik Nygren Engineering AB, Berotec (2015-Present)
- Senior Development Engineer, Knightec AB (2012-2015)
- Mechanical design leader/ Mechanical designer, Electrolux AB, Dishcare (2010-2012)
- Mechanical design leader/ Mechanical designer, Electrolux AB, Floorcare (2005-2010)
- Mechanical designer, Gesab Engineering AB (1999-2005)
• EXEMPEL PÅ UPPDRAG
Senior consultant satelliteoffice, Knightec
Scania
2012 -2015
Responsible to provide the satellite office (10 members) with support and training on general
mechanical design and more deeply on how to design plastic parts. Examples of conducted
educations: Material properties for the most commonly used plastics and their uses, basic
material Chemistry for polymers and elstomers, Injection moulding tooldesign and how it affects
the design. Education and support on how to design plastic parts was provided "on-demand" to
the whole satellite office. The satellite office was also provided with different methods on how
to build stable models in CATIA V5, such as Core/Cavity and Multi-body Modelling.
Senior consultant, Specialist Plastic design
Knightec
2013 -2015
Responsible to lead and develop an expert group in toolbound plastic design. To educate the
Company through holding semainars and build up a resource library in the internal network.
Write quotations and answer questions on plastic design from customers. Support the compnay
with questions concerning plastics.
Domain Area Manager, Mechanical designer
Electrolux AB, Dishcare
2010 -2012
Design responsible globally for doors on dishwashers. Development leader for user interface
and basic structure of doors.
Mechanical design leader/ Mechanical designer
Electrolux AB, Floorcare
2005 -2010
Worked both as development leader and as mechanical designer in development of new
vacuum cleaners and coffe makers. Main task was to design injection moulded plastic and rubber
parts, but also responsible for execution of FMEA, DFA and production adaptation. Responsible
for CATIA and SmarTeam support and also to develop a methodology to build stable parts in
CATIA for the R&D department. Developed and introduced, together with the industrial design
department, a new way of how the interface between the departments should work during the
different stages of a development project. Assisted the industrial design department in thier
communication with other R&D departments in the Electrolux group.
Sida 2/3
BEROTEC AB
STOCKHOLM
Kontakt:
Magnus Lindman
TELEFON: +46 (0)771-44 11 11
E-MAIL: info@berotec.se
WEBB: www.berotec.se
Konsultprofil - Henrik Nygren
Consultat
Gesab Engineering AB
1999 -2005
Worked as a consultant in mechanical design for development projects. Some of the customers:
Electrolux AB, Segerström Automotive AB, Emerson Energy Systems, Scania AB och Collins &
Aikman.
• KURSER I URVAL
- Enovia, 2012.
- Best practice modeling, Catia V5, 2009.
- Lean Development, 2008.
- Tolerance chain calculation, 2008.
- Advanced sufaces, Catia V5, 2006.
- Designing plastics, 2004.
- Basic training, Catia V5, 2003.
- Geomertical dimensioning and tolerancing, 2000.
- Basic training, Unigraphics, 2000.
- Basic training, Catia V4, 1999.
BEROTEC AB
STOCKHOLM
Kontakt:
Magnus Lindman
Sida 3/3
TELEFON: +46 (0)771-44 11 11
E-MAIL: info@berotec.se
WEBB: www.berotec.se