1. home and garden
2. home furnishings
3. sofas and chairs

Complete range
General information
Selling prices for specialist dealers.Valid from 1 January 2015. Nonbinding
recommended unit sales prices. Excluding Value Added Tax.
Subject to technical change without prior notice.
Wilkhahn is certified according to Quality Management System
DIN EN ISO 9001, Environmental Management System DIN EN ISO 14001 FF.
We reserve the right to deviate from illustrations or descriptions of models.
Complaints, which prove to be based on changes due to product improvements
or technical progress, cannot be accepted.
In addition to standard versions of table ranges, customized options are also
available. Forms, dimensions, surface finishes and prices on request.
Add-on elements: the “left” or “right” sides are always as seen by the person
seated.
Finishes
Veneered table tops and wooden frames of seating ranges are protected with
low-solvent, water-based lacquer.
Coloured metal surfaces are powder-coated, free from heavy metal.
Upholstery
All types of upholstery foam used are manufactured CFC-free.
Key to symbols
¡ Seat height
¶ Overall height
¢ Width
| Depth
Veneer direction
Concealed lipping
Visible lipping
The height of the seat has been determined under load conditions using
DIN ­testing equipment. Overall height, width and depth conform to the
­minimum dimension requirements.
D-133-00055
Important information / typical product characteristics
Shine
Shine refers to impressions on the cover which can occur due to pressure, body
heat and moisture. The form in which it manifests itself depends on the model,
cover and upholstery technique and it is one of the characteristics of the design
concerned. Therefore it is not a sign of poor quality.
Price List 2015
Leather production
Leather is a natural product. Each leather hide is unique. Insect bites, chafed areas
or scars are part of the hide’s history. They indicate the natural aspect and high
quality of the material and are therefore not recognised as a justified cause for
complaint.
Wood
Wood is a natural product. In our product ranges, we only use very carefully
selected, high-quality wood and genuine-wood veneers. Typical characteristics
like knots are signs of natural growth. Because each tree trunk is a one-off, differences in the pattern and colour are possible. The unique surface characteristics of
wood are down to nature and therefore not considered reasons for complaints.
Indoor and outdoor furniture
The models are suitable for outdoors. Nevertheless, we recommend not overexposing this furniture to the effects of sun, rain, dust and wind and to keep it in
a dry and well-aired place when not using.
Differences in colour / structure
The combination of different materials, such as chrome plating, or varnishing
aluminium, steel or plastic can lead to differences in the colour and structure
when the surfaces are compared. These differences do not constitute grounds for
complaint.
Upholstery material
35 / Fiberflex
100% Polyester
510 g/lin. m, width 160 cm (63")
Abrasion: 70,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling: 5, BS EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4-5,
EN ISO 105-X12
Flame resistance:
CAL 117 E
EN 1021-1 when covering CMHR-foam
density min. 35 kg/m³
EN 1021-2 when covering CMHR-foam
density min. 50 kg/m³
periodical vacuum cleaning, professional cleaning with dry foam
47 / Nova
100% Polyester
560 g/lin. m, width 140 cm (55")
Abrasion: 50,000 rubs,
DIN EN ISO12947-2 (Martindale)
Light fastness: 5-7, DIN EN ISO 105-B02
Method 2
Pilling: 5, DIN EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4-5,
DIN EN ISO 105‑X12
Flame resistance:
CAL 117 E
EN 1021-1 when covering CMHR-foam
density min. 22 kg/m³
EN 1021-2 when covering CMHR-foam
density min. 36 kg/m³
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
54 / Pitch
100% Trevira CS
470 g/lin. m, width 140 cm (55")
Abrasion:
100,000 rubs, BS EN ISO 12947-2
(Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling: 5, BS EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4-5,
EN ISO 105-X12
Flame resistance: CAL 117 E
DIN 4102-1 B1
NF P 92-503-507 M1
ÖNORM A 3800-1
B1/Q1/TR1
BS 5852 when covering CMHR-foam
EN 1021-1/-2 when covering PUR-foam
density min. 30 kg/m³
UNI VF 9175 1IM when covering CMHRfoam
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
60 / Blend
100% wool
600 g/lin. m, width 140 cm (55")
Abrasion: 50,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling: 3-4, BS EN ISO 12945-2
Fastness to rubbing: Dry 4, wet 4, EN
ISO 105-X12
Flame resistance:
CAL 117 E
BS 5852 when covering FR-foam
BS 7176 low hazard when covering
CMHR-foam density min. 35 kg/m³
BS 7176 medium hazard when covering
CMHR-foam density min. 35 kg/m³
EN 1021-1/-2 when covering CMHRfoam density min. 35 kg/m³
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
66 / Lona
85% wool, 15% polyamide
520 g/lin. m, width 140 cm (55")
Abrasion: 150,000 rubs, DIN EN ISO
12947-2 (Martindale)
Light fastness: 5-7, DIN EN ISO 105-B02
Method 2
Pilling: 4, DIN EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4-5,
DIN EN ISO 105-X12
Flame resistance:
CAL 117 E
ÖNORM A 3800-1 Q1
ÖNORM B 3852 flame retardant when
covering PUR-foam B2
BS 7176 medium hazard when covering
CMHR-foam density min. 35 kg/m³
EN 1021-1/-2 when covering PUR-foam
density min. 22 kg/m³
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
62 / Bond
100% Trevira CS
480 g/lin. m, width 140 cm (55")
yarn dyed
Abrasion: 100,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling: 5, BS EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4-5,
EN ISO 105-X12
Flame resistance: CAL 117 E
DIN 4102-1 B1
NF P 92501-7 M1
ÖNORM A 3800-1
B1/Q1/2
BS 5852 when covering CMHR-foam
EN 1021-1/-2 when covering PUR-foam
density min. 30 kg/m³
UNI VF 9175 1IM when covering CMHRfoam
periodical vacuum cleaning, professional cleaning with dry foam
67 / Miro
65% new wool, 31% hemp, 4%
polyamide
610 g/lin. m, width 140 cm (55")
yarn dyed
Abrasion:
60,000 rubs, BS EN ISO 12947-2 (Martindale)
Light fastness: 5-7, BS EN ISO 105-B02
Method 2
Pilling: 4, BS EN ISO 12945-2
Fastness to rubbing: Dry 4, wet 4, EN
ISO 105-X12
Flame resistance:
CAL 117 E
EN 1021-1/-2 when covering PUR-foam
density min. 22 kg/m³
periodical vacuum cleaning, professional cleaning with dry foam
63 / Auris
100% wool
520 g/lin. m, width 140 cm (55")
Abrasion: 50,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling: 5, BS EN ISO 12945-2
Fastness to rubbing: Dry 4, wet 4, EN
ISO 105-X12
Flame resistance:
CAL 117 E
BS 5852 when covering CMHR-foam
35 kg/m³
EN 1021-1/-2 when covering CMHRfoam density min. 35 kg/m³
UNI 9175/FA1 IM when covering FRfoam density min. 35 kg/m³
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
74 / Leather
Furniture-quality cowhide with tolerances regarding colour and structure,
compliant with DGM, RAL GZ 430
Test results
Light fastness:
6-7, DIN EN ISO 105-B02 Method 2
Flame resistance:
California TB 117 E BS 5852-3 when covering PUR-foam density min. 22 kg/m³
EN 1021-1/-2 when covering PUR-foam
density min. 22 kg/m³
Cleaning
Remove dirt or stains with a damp, absorbent cloth and immediately rub over
the surface with a dry woollen cloth.
87 / Leather
Finest, pure aniline dyed cowhide that
exhibits some natural characteristics or
may develop patina over time.
Light fastness:
>3 based on DIN EN ISO 105-B02
Flame resistance:
DIN 75200 and DIN EN 1021 parts 1 + 2,
CE 117 E
Remove dirt or stains with a damp, absorbent cloth and immediately rub over
the surface with a dry woollen cloth.
69 / Granit
50% wool, 50% cotton
750 g/lin. m, width 138 cm (54")
yarn dyed
Fastness to rubbing: approx. 45,000
rubs, DIN EN ISO 12947-2 (Martindale)
Light fastness: 5-6, DIN EN ISO 105-B02
Method 2
Pilling: 4-5, DIN EN ISO 12945-2
Fastness to rubbing: Dry 4-5, wet 4,
DIN EN ISO 105-X12
Flame resistance:
CAL 117 E
DIN 66084 P-c when covering PURfoam B3 density min. 22 kg/m³
EN 1021-1/-2 when covering PUR-foam
B3 density min. 22 kg/m³
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
Wilkhahn does not offer any guarantee for those fabrics and leather supplied that are from manufacturers with whom Wilkhahn does not have a supply agreement.
A sample of upholstery materials (minimum size A 4) must be supplied in advance to allow them to be checked with regard to workability.
C1
100% cotton
600 g/lin. m, width 140 cm (55")
Abrasion: 50,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 5-6, BS EN ISO 105-B02
Method 2
Pilling:
4-5, BS EN ISO 12945-2
Fastness to rubbing:
Dry 3, wet 2, EN ISO 105-X12
Fixed covers: periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
C2
24% Polyester, 22% flax/linen, 20%
viscose, 20% polyacrylic, 8% wool, 6%
cotton
720 g/lin. m, width 132 cm (52")
Abrasion: min. 35,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 4-5, BS EN ISO 105-B02
Method 2
Pilling:
4, BS EN ISO 12945-2
Fastness to rubbing:
Dry 4, wet 3/4, EN ISO 105-X12
Periodical vacuum cleaning, professional cleaning with dry foam
C3
65% wool, 20% polyamide, 15%
alpaca588 g/lin. m, width 140 cm (55")
yarn dyed
Abrasion: 100,000 rubs, BS EN ISO
12947-2 (Martindale)
Light fastness: 4-5, BS EN ISO 105-B02
Method 2
Pilling:
4, BS EN ISO 12945-2
Fastness to rubbing:
Dry 4-5, wet 3/4, EN ISO 105-X12
Fixed covers: Periodical vacuum
cleaning, professional cleaning with
dry foam
Removable covers: 
Price List 2015
Contents by range
170 range – ON®
9
180 range – Neos
17
20 range – Stitz 2
20
21
21 range – FS-Line
26
21 range – FS Management
230 range – Aline
NEW 240 range – Sito
28
36
249 range – Cura
39
26 range – Modus Basic
41
27 range – Modus Compact
43
28 range – Modus Medium
47
51
28 range – Modus Executive
290 – Sola
NEW
55
3
30 – Graph
57
300 range – Graph
340 range – Chassis
59
65
361 range – Ceno
67
440 range – Confair
69
540 range tables – Contas
81
544 range – Concentra
84
600 – Conversa
87
610 range tables – Timetable
90
620 range tables – Logon
4
100
632 range tables
122
170 ON
180 Neos
20 Stitz 2
124
640 range tables – Palette
21 FS-Line
21 FS
Management
230 Aline
131
660 range – Travis
240 Sito
249 Cura
26 Modus
Basic
odus
27 M
Compact
661 range – Travis height-adjustable
135
odus
28 M
Medium
odus
28 M
Executive
290 Sola
30 Graph
300 Graph
137
830 range – Cubis
340 Chassis
361 Ceno
440 Confair
140
850 range – Velas
540 Contas
544 Concentra
600 Conversa
142
860 range – Asienta
610 Timetable
620 Logon
632
146
890 range – Cana
640 Palette
660 Travis
height661 Travis
adjustable
830 Cubis
147
Quickship ­programme
850 Velas
860 Asienta
890 Cana
Quickship
­programme
5
Environmental information
Sustainability policy
UN Global Compact
Wilkhahn joined the United Nations Global Compact initiative in
2007. The company commits itself
to the ten principles of Global Compact regarding the protection of international human rights, adherence to labour standards and rights
for employees, the protection of
the environment and anti-corruption, all of which are specified as
binding corporate policy.
Wilkhahn & sustainability
In over 100 years of its corporate
history, Wilkhahn can look back on
a sustainability philosophy that has
grown over decades. Terms such
as durability, social fairness, environmental responsibility and cultural orientation have developed
into guiding corporate principles
since the 1950s. Wilkhahn today is
regarded internationally as a model
of excellence, not only on account
of its products but also because of
its modern corporate philosophy.
This is because the company realised early on that sustainable design should embrace environmental aspects, improve social
relationships and define the cultural role of a company. This approach
to the way we do business creates a
bond between us and our customers throughout the world. There is
surely no more rewarding task than
working together for a successful
future that is worth living in.
Corporate principles
Honest product design
We strive to develop durable products, increase their utility value and
reduce waste. “Less is more” or “reduce to the max” are principles that
Wilkhahn constantly reinterprets
for the future. Ecologically driven
design principles are a natural, integral part of product development
at Wilkhahn.
6
A spirit of fairness
Wilkhahn applies a spirit of fairness
towards its employees, partners
and customers. This means providing first-class analyses, information,
advice, management and support.
In the company itself we embrace a
cooperative management style
which sees employee representatives as co-managers who help
shape the company. Fairness and
continual improvement in working
conditions also apply to the supply
chains. To achieve these aims
Wilkhahn has signed an international agreement on fostering employee rights.
Ecological responsibility
Wilkhahn supports sustainable development. Wilkhahn corporate
culture is shaped by the balance
that we strive to strike between
economic, ecological, social and
cultural objectives for safeguarding
the independence of the company.
Adherence to environmentally relevant criteria throughout the entire
product life cycle forms the basis of
the way in which we judge our success.
Employees as partners
Top performance requires a potential-driven style to the way we organise our company, with flexible
working hours, a bonus scheme,
and group and project work. In
turn, all employees share in corporate success in material terms. They
enjoy a comprehensive pension
plan and an employee-focused
health programme. And thanks to
pioneering measures regarding the
architecture of their surroundings,
they work in an environment that
reconciles social, ecological, economic and aesthetic requirements.
ISO 9001:2008 quality management system
In order to safeguard and continually optimize the high quality of
products and processes, a comprehensive quality management system was set up as early as 1996.
Since then it has been certified for
compliance with the ISO 9001
Quality Management Standard of
the International Standardization
Organization. Quality management
is all about customer focus, management responsibility, the participation of all employees involved,
ensuring and improving process
safety, transparent decision-making structures and supplier relations.
ISO 14001:2009 environmental
management system
In addition, Wilkhahn is certified in
accordance with ISO 14001. This is
the international Environmental
Management Standard which sets
out internationally recognised
specifications for an environmental
management system, such as reducing ecological footprints and
evaluating environmental data and
environmental performance.
EMAS
EMAS is the acronym for EcoManagement and Audit Scheme, developed by the European Union. As a
combined environmental management and auditing system, its purpose is to verify companies are improving their environmental
performance. Wilkhahn became
one of the first companies in Lower
Saxony to achieve certified compliance with the current version EMAS
III. In the environmental declaration, confirmed by annual audits,
Wilkhahn gives a public account of
the company’s environmental performance.
For detailed and up-to-date information on Wilkhahn’s socio-ecological approach, go to www.
wilkhahn.com in the “Green” section.
D-133-00055
FSC
The Forest Stewardship Council®
(FSC) quality label indicates compliance with stringent socio-economic
requirements in terms of forest
management and trading wood
products. Wilkhahn’s Bad Münder
headquarters meet the criteria of
the Forest Stewardship Council
(FSC) and are entitled to process
and sell FSC®-certified products (licence code C118389, certificate no.
TUEV-COC-000462).
Product certification
Wilkhahn office ranges are not only
certified according to international
testing and inspection standards
regarding product safety and functional integrity. They also meet all
key international reference systems
for highly health-compatible and
environmentally friendly products.
GREENGUARD™
Virtually all Wilkhahn ranges undergo GREENGUARD testing and
certification. The Greenguard Environmental Institute is an independent institution in the US that certifies products with regard to their
suitability for interiors. Besides environmental aspects, special focus is
placed on ensuring that products
do not emit any pollutants that
might be harmful to health.
LEED
Leadership in Energy and Environmental Design (LEED) is a rating system used by the US Green Building
Council to evaluate the environmental and social compatibility of
buildings. LEED certification awards
extra credit points if Wilkhahn office chair and table ranges are used.
Green Star
Green Star is an extensive, voluntary rating system developed by
the Australian Green Building
Council. The system assesses how
ecological a building’s design is.
The system uses various categories
to rate any potential ecological impact resulting from a location chosen for a project, the way the project is carried out, managed or its
design.
Environmental Product Information
sheets, as well as classifications regarding LEED and Green Star,
are listed under the product ranges
concerned and can be downloaded
at www.wilkhahn.com.
Responsibility from the
very start
In the design and development
process, ecological impact is also
taken into consideration in addition
to design, functional and businessrelated aspects. Because these factors play a pivotal role in the materials chosen, manufacturing
processes, options regarding assembly, logistics and transport and
how easy products are to repair or
recycle. This overview shows the
key aspects for the entire product
life cycle that currently apply at
Wilkhahn.
Materials
The materials used are subject to
stringent controls. Prohibited
chemicals are not used in our products at all. All feedstock is listed in a
register of hazardous substances.
This helps to minimise the use of or
substitute any potentially harmful
materials. With the goal being to
achieve maximum durability and
quality, some recycled materials are
used in the production of Wilkhahn
ranges. This applies in particular to
metals like steel and aluminium.
Production
Efficient use of water, waste
management and sustainable
energy production
Water is becoming an increasingly
important resource. Wilkhahn does
its utmost to minimise water consumption in all areas. By treating
process water, recycling and using
state-of-the-art varnishing machinery, no waste water is produced
that requires monitoring. The
Wilkhahn waste management concept includes sorting waste according to type, as well as recycling and
disposing of all waste fractions resulting from production and management. One of the environmental management system’s most
important goals is to cut energy
consumption continually. A combined heat and power plant and
connection to a biogas plant at the
Bad Münder site have more than
doubled energy efficiency. As a result, heating at the headquarters
and production facilities is CO2 neutral.
Wilkhahn production sites
Wilkhahn products are manufactured and assembled in Bad
Münder (Germany), Castellón
(Spain) and Sydney (Australia). The
branch facilities and the international subsidiaries are not only subject to quality management requirements, but also to guidelines
for the socio-ecological focus of
corporate policy which apply
through the entire company.
Product use
Aesthetics and design
Products are sustainable if they
serve a purpose. The timeless design of the Wilkhahn ranges also
means they are useful, intuitive to
operate and the materials are durable.. A standard that is reflected by
every single detail. The Wilkhahn
design approach therefore results
in an increase in the utility value of
a product that is meant to last.
Durability and guarantee
The ranges set standards for product design that is sustainable in the
best possible sense of the word.
The durability of the high quality
materials and the traditional, understated design guarantee the
chair will last for decades. Our manufacturer’s guarantee is valid for
two years, so that customers can reliably plan ahead. An issue we feel
responsible for, regardless of the
fact that our products last a long
time anyway. We consider guarantees way beyond these periods as
selling the future short. Our services to extend the ecological life of
the chair include maintenance as
well as an overhaul of older chairs.
Wilkhahn will repair any furniture
that has been discontinued for two
years after production has been
halted.
End of the product life-cycle
Return of used products and recycling
When customers have stopped using our products, we still take our
responsibility seriously and offer
extensive services for taking back
and recycling used products. We
guarantee that used products may
be returned in their entirety. They
are disassembled at our plant, all
components are sorted according
to type and – if possible – are recycled. All materials are clearly
marked, non-toxic and easy to disassemble. As a result, we can ensure that our product components
are returned to local material and
production cycles and are properly
recycled and disposed of if necessary.
Disassembly and recycling
Most components in the Wilkhahn
ranges permit non-destructive disassembly. In order to guarantee
materials are sorted according to
type, all components over 150 g in
weight are labelled. No agents to
protect materials, or organic halogen compounds are used that prevent recycling at a later date.
Air quality and emissions of
harmful substances
All products undergo certification
in the US for compliance with the
GREENGUARD Indoor Air Quality™
standard. GREENGUARD™ certifies
low-emission products.
7
170 range
ON ®
Design: wiege
Technical details
Function
Task chairs with Trimension®,
­synchronous, three-dimensional
kinematics that encourage threedimensional dynamic sitting. The
coordinated interaction of the technology, seat and back automatically
adapts to the user – whatever
the posture or motion involved.
The supporting counterpressure
is quickly and infinitely adjustable
in any direction (a max. of
4.5 ­rotations) for people weighing
between 45 – 120 kg. Backrest
height adjustable by up to 60 mm
(2⅜") in six lockable positions.
Backrest and seat can be locked in
the front sitting position. The seat
height is infinitely adjustable between 400 mm (15¾") and 520 mm
(20½") with a DIN 4550-compliant
gas lift. All models optionally available with seat depth adjustment of
400 – 450 mm (15¾" – 17¾").
Conference and visitor chairs with
Trimension, on request with pivotable column not height adjustable,
alternatively as four-legged type or
cantilever chair, optionally stackable.
Frame
Task chairs
Five-star base, optionally with
black, through-dyed plastic, or diecast aluminium, coated (black or silver satin finish), polished or bright
chrome plated. Load-dependent
braking, twin wheel swivel castors
made of black polyamide in accordance with DIN EN 12529 as standard types for carpets; with grey soft
polyurethane facing for hard floors.
Optional antistatic castors. Shell for
the technology made of die-cast
shot blasted aluminium, optionally
coated in black or silver satin finish,
with top cover made of black or
through-dyed polypropylene. Gas
lift covered by telescopic protective
tubing made of black throughdyed polypropylene.
Backrest
Visitor / conference chairs
Four-star, die-cast aluminium base,
coated (black or silver satin finish),
polished or bright chrome plated.
Black, multi-purpose plastic glides
for all types of flooring. Swing
plates made of die-cast aluminium,
coated (black or silver satin finish),
polished or bright chrome plated.
Shell for the technology made of
die-cast, shot-blasted aluminium,
optionally coated in black or silver
satin finish, with top cover made
of black, through-dyed polypropy­
lene. Gas lift covered by telescopic
protective tubing made of black
through-dyed polypropylene.
Cantilever chairs
Frame made of bright, chrome plated steel tube, 22 mm (⅞") in diameter, with anti-tilt stoppers made of
black polyamide in the standard
version for carpets, optionally with
hard polyamide glides for soft
floors, soft polyurethane glides for
hard floors, or polyamide glides
with additional felt insert (e. g. for
wooden or stone floors susceptible
to scratches). Small plastic parts
black through-dyed.
Four-legged visitor chairs
Frame made of bright chrome
­plated steel tube, legs 22 mm (⅞")
in diameter. Multipurpose POM
glides (polyoxymethylene) in black
for soft and hard floorings. Small
plastic parts black through-dyed.
Seat
Task, visitor and conference
chairs
Highly elastic, flexibly suspended
seat shell with seat upholstery
­panel made of black, through-dyed
polypropylene, polyurethane seat
cushion covered in the same
­material as the backrest cover in
Fiberflex, or fabric. Seat can be
­replaced. In models with management grade upholstery (174 / 71,
175 / 71, 171 / 71) seat cushion with
extra padding and side facings,
­optionally also in leather. Optionally available with seat depth adjustment of 400 – 450 mm (15¾" – 17¾”)
for all types of upholstery.
3D armrest
Flexframe
Swing plate
Seat
Seat bearer
Button/knob
Mechanism cover
9
Back
Seat and back
Armrests
Task, visitor and conference
chairs
Elastic back frame, height adjustable by 60 mm (2⅜") in six lockable
positions, made of through-dyed,
fibre glass reinforced polyamide,
covered with Fiberflex, optionally
also with fabric (with additional
padding). In models with management grade upholstery (models
174 / 71, 175 / 71, 171 / 71) back
frame optionally with back cushion
too. Backrest upholstery with
­additional padding, front of backrest also with concealed, cut foam
fleece sewn into the cover and with
side facings, optionally with leather
cover. Medium-high and high back
rest, high backrest optionally with
headrest (height 16 cm (6¼")),
­either in the same ­material as
the backrest cover, or covered
in leather on the front. Back is
­replaceable.
Cantilever / four-legged visitor
chairs
Unitary shell-frame design made
of through-dyed, fibre glass reinforced polypropylene. Seat cushion
made of polyurethane moulded
foam, in models with management
grade upholstery (models 176 / 71,
178 / 71) with additional padding
and side facings. In models 176 / 7,
178 / 7 seat cushions covered in the
same material as the backrest cover
in Fiberflex or fabric, models
176 / 71 and 178 / 71 with management grade upholstery or in leather.
Seat can be replaced.
Back frame covered in Fiberflex,
in models 176 / 7, 178 / 7 back optionally covered in fabric. Models
with management grade upholstery (176 / 71 and 178 / 71) optionally with back cushion in fabric or
leather, with additional padding,
front of backrest also with concealed, cut foam fleece sewn into
the cover and side facings, back
cover replaceable.
Task chairs
3D armrests made of fibreglass reinforced, black through-dyed polyamide. Armrest pads made of black
through-dyed polyurethane (TPU)
optionally also made of polyurethane foam and covered in leather
if desired. Armrest covers made of
black, through-dyed polypropylene. Height of armrests adjustable
by 100 mm (3⅞") (eight lockable
positions), depth by 40 mm (15/8"),
in each case can be swivelled 30°
inwards and outwards.
Frame versions
Task chairs
5‑star base
50
51
Polyamide
Bright chrome plated
The ON cantilevers and four-legged
visitor chairs comply with
DIN EN 13761, DIN EN 1022 and
ANSI/BIFMA X5.1.
The ON four-legged task and
­cantilever chairs qualify for the
GS symbol.
Optionally, the ON task, visitor
and conference chairs (without
headrest) can also be shipped
with disassembled backrests
in boxes.
Visitor / conference chairs
Rigid armrests made of fibreglassreinforced, black, through-dyed
polyamide. Armrest pads made of
black through-dyed polyurethane
(TPU) optionally also made of polyurethane foam and covered in
leather if desired. Armrest covers
made of black, through-dyed polypropylene.
All visitor and conference chairs
have glides for soft flooring
(e.g. carpets). Conference and
visitor chairs with Trimension,
on request with swivel-mounted
column not height adjustable,
­alternatively as four-legged type
or cantilever chair, optionally
stackable.
Cantilever / four-legged visitor
chairs
Armrest covers made of black,
through-dyed polypropylene. On
non-stackable chairs, optionally
with upholstered armrests, when
covered in fabric with black leather
74 / 99, when covered in leather to
match the colour of the leather.
Accessories
Optional for visitor chair, model
176 / 7: Inline connectors, model
177 made of zinc-plated steel, twowheeled cart, model 176 for 8 visitor chairs.
Optional for cantilever, model
178 / 7, four-wheeled trolley, model
178 for 8 cantilevers.
Standards
The ON task, visitor and conference
chairs comply with office chair
standard DIN EN 1335, type A or B,
of ANSI / BIFMA X 5.1. If required
also available and compliant with
NPR 1813.
Please note:
The prices for types with cushioning including fabrics and leather
provided by the customer are given
on request.
Swing plates
52
53
60
Coated silver satin finish or black
Silver satin finish or black coating or bright cromium
plated
Aluminium polished
Aluminium polished
Coated black
Coated black
Coated, silver satin finish Coated, silver satin finish
Visitor chairs
51
Round steel tube frame
Bright chrome plated
Cantilever chair
51
Round steel tube frame
Bright chrome plated
Mechanism cover
Aluminium blasted
Aluminium blasted
Aluminium blasted
Aluminium blasted
Aluminium blasted
Castors, glides, frame components, adjustment levers
Small components
41 Black
Accessories
177 Inline connector (for model 176/7)
176 Two-wheeled cart for 8 visitor chairs
178 Four-wheeled trolley for 8 cantilevers
10
€
33
603
624
Upholstery material
ON®
Task chairs
Medium-height backrest
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
174/7
With seat cushion,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated swing plates
35
47
54
60
62
63
66
67
69
€
€
€
€
734
787
799
811
77
93
106
Additional charge
Covered backrest
High backrest
¡ 40/52 ¶ 105/117 ¢ 70 | 66
(¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
175/7
With seat cushion,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated swing plates
921
974
986
998
Additional charges
Covered backrest
Headrest in the same material as the backrest cover
Headrest covered in leather on the front
68
109
87
68
109
109
68
109
130
68
109
€
Additional charges/reduced prices
specific to range
Aluminium-coated star base and swing plates
Aluminium polished star base and swing plates
Bright chrome plated aluminium star base, aluminium-coated swing plates
Bright chrome plated aluminium star base and swing plates
78
145
156
330
Seat depth adjustment
(approx. 400 to 450 mm (15¾" to 17¾"))
Polyurethane foam armrest pad
Leather-upholstered armrests
Mechanism cover silver satin finish or black coated
Anti-static castors
76
46
172
34
40
Without armrests
– 60
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors (in combination with aluminium frame).
11
Upholstery material
ON®
Conference/visitor chairs
Medium-height backrest
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
171/7
With seat cushion,
rigid armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Frame aluminium coated
35
47
54
60
62
63
66
67
69
€
€
€
€
826
879
891
903
Additional charge/reduced prices
Covered backrest
Aluminium polished star base and swing plates
Bright chrome plated aluminium star base, aluminiumcoated swing plates
Bright chrome plated aluminium star base and swing plates
68
77
68
93
68
106
68
78
252
78
252
78
252
78
252
Seat depth adjustment
(approx. 400 to 450 mm (15¾" to 17¾"))
Polyurethane foam armrest pad
Leather-upholstered armrests
Mechanism cover silver satin finish or black coated
76
46
172
34
76
46
172
34
76
46
172
34
76
46
172
34
Without armrests
– 60
– 60
– 60
– 60
Available with pivotable column, not height adjustable (at no extra cost).
12
Upholstery material
ON®
Conference/visitor and cantilever chairs
Standard height backrest
¡ 43 ¶ 90 ¢ 64 | 64
(¡ 16⅞" ¶ 35⅜" ¢ 25¼" | 25¼")
176/7
With seat cushion,
Stackable 5‑high free-standing,
Backrest covered in Fiberflex fabric,
Polypropylene armrests
Frame bright chrome plated
35
47
54
60
62
63
66
67
69
€
€
€
€
433
486
498
510
77
93
106
523
535
547
77
93
106
Additional charge
Covered backrest
Standard height backrest
¡ 43 ¶ 92 ¢ 61 | 60
(¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
178/7
With seat cushion,
Stackable 5‑high free-standing,
Backrest covered in Fiberflex fabric,
Polypropylene armrests
Frame bright chrome plated
Additional charge
Covered backrest
470
€
Additional charges/reduced prices
specific to range
Leather-upholstered armrests (not stackable)
172
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
13
Upholstery material
ON®
Task chairs with management grade upholstery
Medium-height backrest
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
60
62
63
66
67
69
74
87
€
€
€
1066
1362
1442
329
172
450
172
592
200
175/71
Seat with management grade upholstery,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated swing plates
1197
1493
1573
Additional charges
Back with management grade upholstery
Leather-upholstered armrests
Headrest in the same material as the backrest cover
Headrest covered in leather on the front
354
172
89
131
484
172
131
626
200
145
174/71
Seat with management grade upholstery,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated swing plates
Additional charge
Back with management grade upholstery
Leather-upholstered armrests
High backrest
¡ 40/52 ¶ 105/117 ¢ 70 | 66
(¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
€
Additional charges/reduced prices
specific to range
Aluminium-coated star base and swing plates
Aluminium polished star base and swing plates
Bright chrome plated aluminium star base, aluminium-coated swing plates
Bright chrome plated aluminium star base and swing plates
Seat depth adjustment
(approx. 400 to 450 mm (15¾" to 17¾"))
Polyurethane foam armrest pad
Mechanism cover silver satin finish or black coated
Anti-static castors
Without armrests
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors (in combination with aluminium frame).
14
78
145
156
330
76
46
34
40
– 60
ON®
Conference/visitor chairs with management grade upholstery
Medium-height backrest
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
Upholstery material
60
62
63
66
67
69
74
87
€
€
€
1143
1439
1519
329
68
450
68
592
68
78
252
78
252
78
252
Seat depth adjustment
(approx. 400 to 450 mm (15¾" to 17¾"))
Polyurethane foam armrest pad
Leather-upholstered armrests
Mechanism cover silver satin finish or black coated
76
46
172
34
76
46
172
34
76
46
200
34
Without armrests
– 60
– 60
– 60
171/71
Seat with management grade upholstery,
rigid armrests,
Backrest covered in Fiberflex fabric,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Frame aluminium coated
Additional charge/reduced prices
Back with management grade upholstery
Aluminium polished star base and swing plates
Bright chrome plated aluminium star base, aluminium-coated swing
plates
Bright chrome plated aluminium star base and swing plates
Available with pivotable column, not height adjustable (at no extra cost).
15
ON®
Conference/visitor and cantilever chairs with management grade upholstery
Standard height backrest
¡ 43 ¶ 90 ¢ 64 | 64
(¡ 16⅞" ¶ 35⅜" ¢ 25¼" | 25¼")
Standard height backrest
¡ 43 ¶ 92 ¢ 61 | 60
(¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
Upholstery material
60
62
63
66
67
69
74
87
€
€
€
176/71
Seat with management grade upholstery,
Backrest covered in Fiberflex fabric,
Polypropylene armrests
Frame bright chrome plated
751
1047
1127
Additional charge
Back with management grade upholstery
Leather-upholstered armrests
329
172
450
172
592
200
178/71
Seat with management grade upholstery,
Backrest covered in Fiberflex fabric,
Polypropylene armrests
Frame bright chrome plated
789
1085
1165
Additional charge
Back with management grade upholstery
Leather-upholstered armrests
329
172
450
172
592
200
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
16
180 range
Neos
Design: wiege
Technical details
Function
Task chairs with automatic synchroadjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When
leaning back, the backrest tension
increases according to the need for
additional support. A crank handle
allows infinitely variable tension adjustment for the user. Backrest position lockable in four different positions by engaging lever.
Encapsulated gas lift, conform­ing
to DIN 4550, for infinitely variable
adjustment of seat height of task
chairs. Adjustment of backrest
height in six positions within a
range of 60 mm (2⅜"); models with
mesh membrane backrest have
lumbar support adjustable within a
range of 60 mm (2⅜") instead of
the height-adjustable backrest. All
models feature adjustment of seat
depth in eleven positions between
385 – 435 mm (15⅛" – 17⅛"). Models with a mesh membrane backrest as for task chair versions.
Cantilever chairs: chair, stackable
up to 5‑high, for visitors, meetings,
conferences and seminars to match
task chairs; with resilient, singlesection seat shell, integral stacking
buffer and outer rail / grip on the
backrest. Model 183 / 3 with leather
covering (74) and 183 / 5 not stackable.
Frame
Back
Task chairs
Five-star base in glass fibre-reinforced polyamide, through-dyed in
black-grey, or in die-cast aluminium, polished, high-lustre polished
or bright chrome plated. Twin
wheel swivel castors with load-dependent braking, conforming to
DIN EN 12529, as the standard
­version for carpeted floors, or with
a grey polyurethane soft lining for
hard floors (please specify when
­ordering). Anti-static castors on
­request (in combination with alu­
minium frame). Synchro-mechanism case in die-cast aluminium.
Synchro-mechanism cover in blackgrey through-dyed polypropylene.
Seat bearer in glass fibre-reinforced
polyamide, through-dyed in blackgrey. See table below for frame
­finishes.
Task chairs
Backrest shell in polyamide with
back shell cover in polypropylene,
through-dyed in black-grey or
white. Upholstery: covered, onepiece moulded foam, exchangeable. Model 181/ 6 with backrest
frame in glass fibre-reinforced polyamide, in black-grey, covered with
semi-transparent, black-grey, lightgrey or white high-perform­ance
poly­ester; lower section of backrest
frame covering in polypropylene, in
black-grey; optional lumbar support in polyamide, black-grey
through-dyed with integral foam
overlay.
Cantilever chairs
Frame in round steel tube,
Ø 22 mm (⅞"), thickness 3 mm (⅛"),
bright chrome plated, with ­anti-tilt
stoppers in black-grey polyamide as
the standard version for carpeted
floors, optionally with glides in
black-grey polyamide (for soft
floors) or black-grey polyurethane
(for hard floors), optionally with additional felt insert (please specify
when ordering); outer rail / grip in
die-cast zinc, bright chrome plated.
Seat
Task chairs
Seat shell in polypropylene,
through-dyed in black-grey or
white. Upholstery: covered,
one-piece moulded polyurethane
foam with integral pelvic support,
exchangeable. Adjustment of seat
depth: on request, depth of seat
platform individually adjustable
from 385 – 435 mm (15⅛" – 17⅛").
The seat shifts in such a way that
ensures that the angle of the pelvic
wedge automatically adjusts to the
position of the seat shell.
Seat and back
Single-section seat and back shell
in resilient polypropylene, throughdyed in black-grey or white. Seat
cushion: exchangeable, with concealed screw fittings; comprising
covered, one-piece mould­­ed poly­
urethane foam. Optional, exchangeable back cushion with
same features as the seat cushion.
Model 183 / 3 with leather covering
not stackable. Model 183 / 5 (not
stackable) with leather-covered
seat and back cushions with woolfleece overlay and side facings, optionally with seat and back shell
covered with leather on the back
sections.
Standards
Neos task chairs conform to the Office Chair Standards DIN EN 16139
and DIN EN 13761, ANSI / BIFMA X 5.1 (except for model 181 / 6)
and other ­international ­office chair
standards. Version conforming to
NPR 1813 on request. Depending
on selected features, they meet the
requirements of categories A or B
of the Office Chair Standard
DIN EN 1335.
Neos task chairs comply with
the “Ergonomics Approved”
­requirements.
The cantilever and visitor charis
comply with DIN EN 16139-L1 and
DIN EN 13761.
Armrests
Task chairs
3‑D armrests in glass fibre-reinforced polyamide, through-dyed
in black-grey or white, with blackgrey polyurethane pad, adjustable
by 100 mm (3⅞") in height and
50 mm (2") in depth; they can be
pivoted inwards and outwards by
15°.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
5‑star base
Frame versions
50
51
52
72
Accessories
Cantilever chairs
Cantilever chairs
Armrests comprise round sleeves
in a black-grey or white tactile,
PVC‑free elastomer material.
­Model 183 / 5, or optionally with
­solid-wood armrest pads, oak,
­maple or walnut natural finish.
Polyamide
Bright chrome plated
Aluminium polished
Aluminium high-lustre polished
183 Four-wheeled trolley for eight stackable cantilever chairs
€
414
17
Neos
Task chairs
Medium-height backrest
¡ 40/52 ¶ 98/110 ¢ 66 | 64
(¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")
Medium-height backrest
¡ 40/52 ¶ 98/110 ¢ 66 | 64
(¡ 15¾"/20½" ¶ 38⅝"/43¼" ¢ 26" | 25¼")
47
Upholstery material
54
60
74
62
63
66
67
69
€
€
€
€
181/71
With seat and back cushion,
With 3‑D armrests,
Infinitely variable height adjustment,
Adjustment of backrest height and seat depth,
Automatic synchro-adjustment, tension control
Frame polyamide
520
538
580
871
Additional charge
Seat and back shell and 3‑D armrests through-dyed in white
(black-grey armrest pad is standard)
102
102
102
102
181/6
With seat cushion and transparent backrest,
With 3‑D armrests,
Infinitely variable height adjustment,
Adjustment of seat depth,
Automatic synchro-adjustment, tension control
Frame polyamide
520
538
580
715
35
8
35
8
35
8
35
8
Additional charges
Height-adjustable lumbar support
Polyester material in light-grey or white
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium high-lustre polished
Frame aluminium bright chrome plated
Anti-static castors
40
Without armrests
– 60
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors (in combination with aluminium frame).
18
66
84
133
Neos
Cantilever chairs
Standard height backrest
¡ 43 ¶ 80 ¢ 55 | 60
(¡ 16⅞" ¶ 31½" ¢ 21⅝" | 23⅝")
Standard height backrest
¡ 43 ¶ 80 ¢ 58 | 60
(¡ 16⅞" ¶ 31½" ¢ 22⅞" | 23⅝")
47
Upholstery material
54
60
74
62
63
66
67
69
€
€
€
€
183/3
With seat cushion, backrest not upholstered,
Stackable 5‑high free-standing, up to 8‑high on twowheeled cart,
with leather covering, not stackable,
With plastic-covered armrests
Frame bright chrome plated
421
430
448
595
Additional charges
Seat/back shell and armrest pad through-dyed white
Back cushion
28
67
28
70
28
74
28
149
183/5
With seat and back cushion,
Not stackable,
With wool fleece underlay and side facings,
Cushioned armrest pads,
Leather-covered with triple-sewn seam
Frame bright chrome plated
1185
Additional charge/reduced prices
Seat and back shell covered with leather on the back sections
Solid-wood armrests
205
– 160
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
19
20 range
Stitz 2
Design: ProduktEntwicklung Roericht
Technical details
Function
The Stitz is a leaning aid with
­infi­nitely variable height adjustment by means of an encapsulated
gas lift.
Frame
Black elastomer base filled with
quartz sand. Black polyamide base
plate.
Seat
Black polyamide seat frame. Cork
inset, optionally hard wax treated,
covered in fabric or in embossed
leather. Gas lift lever for height
­adjustment, accessible all round,
­underneath black polyamide seat
base.
Upholstery material
€
Stitz
¶ 60/83 ¢ 31
(¶ 23⅝"/32⅝" ¢ 12¼")
20
201/1
Seat surface cork
Frame black
201/2
Frame black
60
63
66
67
74
€
€
526
550
471
21 range
FS-Line
Design: Klaus Franck, Werner Sauer
Technical details
Function
Task chairs with automatic synchroadjustment: the seat / backrest
­angle adjusts automatically to the
sitting position of the user. When
leaning back, the backrest tension
increases according to the need for
additional support. The person
­sitting on it can infinitely adjust the
tension. Forward position lockable
by engaging lever. Gas lift,
DIN 4550 compliant, to allow infinite adjustment of the seat height.
Conference chairs / visitor chairs
with automatic synchro-adjustment, without front locking position, with fixed seat height.
Frame
Task chairs:
Die-cast aluminium star base,
bright chrome plated, polished or
coated.
Twin wheel swivel castors in black
polyamide with load-dependent
braking, DIN EN 12529 compliant,
as a standard version for carpeted
floors, or with a grey polyurethane
soft lining for hard floors. Anti-static castors on request. Glides in black
polyamide as the standard version
for carpeted floors, or in black polyurethane for hard floors.
Swivel arms in die-cast aluminium,
bright chrome plated or coated in
the same colour depending on star
base (coated black for polished
star-base).
Cantilever chairs:
Frame for models 212/5 in round
steel tube, bright chrome plated or
coated; stackable version with
bright chrome plated frame only.
Frame of model 220 in oval aluminium tube, bright chrome plated or
coated.
Cantilever model 212 with anti-tilt
stoppers as the standard version for
carpeted floors, with additional
glides for hard floors, on request
with felt insert.
Frame versions
Small components
Backrest of task chairs 211 and 213
optionally with integral, adjustable
lumbar support. Seat upholstery:
one-piece moulded foam covered,
exchangeable.
Seat and back Models 220/6 to
220/9
Tubular steel frame with flexible
middle section, over which is
stretched an elastic mesh and the
whole is moulded in foam. Armrests in integral foam, leather-covered, in black for fabric cover and in
matching colour leather for leather
cover. Cover with stitched fluting,
exchangeable, or cover with integral slim cushion, exchangeable.
Standards
FS task chairs are compliant with
the Office Chair Standard
DIN EN 1335, ANSI / BIFMA X 5.1,
BS 5459 and other international
­office chair standards. Depending
on selected features, they meet the
requirements of categories B or C
of the Office Chair Standard
DIN EN 1335. FS cantilever chairs
comply with DIN 68878-1.
The FS task chairs comply with the
“Ergonomics Approved“ standard.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Task chairs
Star base and swing arms
51
52
53
60
Bright chrome plated
Star base aluminium polished – swing arms coated (black)
Coated black
Coated, silver satin finish
Cantilever chair
Round steel tube frame or oval aluminium tube frame
51
53
60
Bright chrome plated
Coated black
Coated, silver satin finish
Castors or glides, frame components, armrests, adjustment levers
41
Accessories
Seat and back Models 211/1 to
213/8
Seat and backrest shell in viscoelastic, through-dyed polypropylene
with a flexible middle section in the
colours
91 natural white
92 platinum
97 asphalt
99 black.
Standard armrests in the same material, black.
Black
214 Four-wheeled trolley for eight stackable cantilever chairs
€
538
21
Upholstery material
54
60
63
66
67
69
FS-Line
Conference/visitor chairs
Standard height backrest
¡ 42/53 ¶ 88/99 ¢ 63 | 60
(¡ 16½"/20⅞" ¶ 34⅝"/39" ¢ 24¾" | 23⅝")
211/8
One-piece seat and back shell, upholstered,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charge
Height-adjustable lumbar support
High backrest
¡ 42/53 ¶ 105/116 ¢ 65 | 62
(¡ 16½"/20⅞" ¶ 41⅜"/45⅝" ¢ 25⅝" | 24⅜")
213/8
One-piece seat and back shell, upholstered,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charge
Height-adjustable lumbar support
Counter chair
¡ 52/63 ¶ 109/120 ¢ 65 | 63
(¡ 20½"/24¾" ¶ 42⅞"/47¼" ¢ 25⅝" | 24¾")
211/1
One-piece seat and back shell, upholstered,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control,
with foot ring (not height adjustable)
Frame aluminium coated
€
€
795
839
59
59
921
965
59
59
1063
1107
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium bright chrome plated
44
90
Anti-static castors
40
Without armrests
– 74
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge).
22
FS-Line
Task chairs
Medium-height backrest
¡ 42/52 ¶ 92/102 ¢ 67 | 63
(¡ 16½"/20½" ¶ 36¼"/40⅛" ¢ 26⅜" | 24¾")
220/8
One-piece seat and back frame, fully upholstered,
With stitched fluting,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charge
Slim cushion
* Leather 87 available with slim cushion only
High backrest
¡ 42/52 ¶ 108/118 ¢ 67 | 63
(¡ 16½"/20½" ¶ 42½"/46½" ¢ 26⅜" | 24¾")
220/9
One-piece seat and back frame, fully upholstered,
With stitched fluting,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charge
Slim cushion
* Leather 87 available with slim cushion only
60
63
66
67
62
€
€
2245
184
€
€
2245
2853
(2853)*
259
649
3324
(3324)*
289
728
184
2606
229
Upholstery material
69
74
87
2606
229
€
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium bright chrome plated
44
90
Anti-static castors
40
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge).
23
FS-Line
Conference chairs/visitor chairs
Standard height backrest
¡ 44 ¶ 89 ¢ 63 | 60
(¡ 17⅜" ¶ 35" ¢ 24¾" | 23⅝")
Medium-height backrest
¡ 42 ¶ 92 ¢ 67 | 63
(¡ 16½" ¶ 36¼" ¢ 26⅜" | 24¾")
211/6
Swivel-mounted,
One-piece seat and back shell,
upholstered,
Automatic synchro-adjustment, tension
control
Frame aluminium coated
220/6
Swivel-mounted,
one-piece seat and back frame, fully
upholstered,
With stitched fluting,
Automatic synchro-adjustment, tension
control
Frame aluminium coated
Additional charge
Slim cushion
* Leather 87 available with slim cushion
only
High backrest
¡ 42 ¶ 108 ¢ 67 | 63
(¡ 16½" ¶ 42½" ¢ 26⅜" | 24¾")
220/7
Swivel-mounted,
one-piece seat and back frame, fully
upholstered,
With stitched fluting,
Automatic synchro-adjustment, tension
control
Frame aluminium coated
Additional charge
Slim cushion
* Leather 87 available with slim cushion
only
Upholstery material
69
74
87
54
60
63
66
67
62
€
€
€
707
751
751
2157
2157
184
184
2518
229
€
2518
229
€
€
2765
(2765)*
259
649
3236
(3236)*
289
728
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium bright chrome plated
44
90
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
24
FS-Line
Cantilever chairs
Standard height backrest
¡ 44 ¶ 85 ¢ 56 | 61
(¡ 17⅜" ¶ 33½" ¢ 22" | 24")
212/5
One-piece seat and back shell,
upholstered,
Frame coated
Additional charges
Frame bright chrome plated
Stackable version (in combination with
frame bright chrome plated only,
stackable 5‑high free-standing, up to
8‑high on four-wheeled trolley)
Upholstery material
69
74
87
54
60
63
66
67
62
€
€
€
506
550
550
33
33
33
71
71
71
€
€
€
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
25
21 range
FS Management
Design: Klaus Franck, Werner Sauer, wiege
Technical details
Function
Task chairs with automatic synchroadjustment: the seat and backrest
automatically tilt to any posture
the person adopts. When leaning
back, the backrest tension increases
proportionately. The person using
the chair can infinitely adjust the
tension. The front position is lockable by engaging the lever. DIN 4550
compliant gas lift for infinite adjustment of the seat height.
Frame
Die-cast aluminium, bright chrome
plated star base. Twin wheel swivel
castors with load-dependent braking, made of black polyamide in
­accordance with DIN EN 12529 as
the standard version for carpets;
with grey soft polyurethane facing
for hard floors. Castors optionally
electrically conductive. Black poly­
amide glides as the standard version for carpets and in black
polyure­thane for hard floorings.
Die-cast aluminium, bright chrome
plated swivel arms.
Seat and back
Steel tube frames with a flexible
middle section, covered with elastic
mesh. Foam upholstery with additional cushioning. Exchangeable
cover with wider stitched fluting.
­Integral foam armrests, leather-­
covered with stitched seam.
Standards
The FS task chairs ­comply with
DIN EN 1335, ANSI / BIFMA X 5.1
and other international office chair
standards. Depending on the
­version they also fulfil the requirements of categories B or C of the
DIN EN 1335 office chair standard.
Standards
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Frame versions
Small components
Task chairs
Star base and swing arms
51
Bright chrome plated
Castors or glides, frame components, armrests, adjustment levers
41
26
Black
Upholstery material
74
FS Management
Task chairs
€
Medium-height backrest
¡ 42/52 ¶ 100/110 ¢ 67 | 63
(¡ 16½"/20½" ¶ 39⅜"/43¼" ¢ 26⅜" | 24¾")
High backrest
¡ 42/52 ¶ 116/126 ¢ 67 | 63
(¡ 16½"/20½" ¶ 45⅝"/49⅝" ¢ 26⅜" | 24¾")
220/82
One-piece seat and back frame, fully upholstered,
with wider stitched fluting,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium bright chrome plated
2636
220/92
One-piece seat and back frame, fully upholstered,
with wider stitched fluting,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium bright chrome plated
3053
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors.
27
230 range
Aline
Design: Andreas Störiko
Technical details
Function
Stylish and coherently designed,
multi-purpose furnishing range for
meetings, consultations and seminars, in showrooms and event
­spaces, areas for breaks, lounges
and bistros, as well as ­libraries,
­internet cafés or a home office.
Multi-purpose chair
Light, transparent, stackable multipurpose chair for meetings, consultations, seminars and large-scale
events. Very compact, form-fit
stacking, with each chair adding
only 20 mm (¾") to the height of the
stack due to self-engaging, ­covered
seat and back frames (­total height
of 15 stacked chairs is 106 cm
(41¾"). Weight 5.1 kg only (without
armrests), 5.4 kg with armrests.
Model 233 only weighs 5.9 kg
(without armrests) or 6.2 kg (with
armrests).
Multi-purpose chair, optionally
with seat cushion, available as a
stackable or a non-stackable version. The stackable types have extra
bumpers and can be stacked extremely compactly and in a form-fit
manner.
Counter / bar height stool
Stylish and transparent bar stool
with backrest and footrest bar,
­optionally with seat cushion.
Task chairs and visitor chairs
Simple, transparent visitor task
chairs and height-adjustable office
task chairs for meetings and consultations, Internet cafés, showrooms
and hot desking spaces.
Tables
Square and circular top pedestal
­tables in low, sitting and standing
height (optionally stackable) and
rectangular tables on a T-shaped
base for lounges and recreational
areas, cafeterias and bistros.
Chairs
Frame
Multi-purpose chair
Multi-purpose chair: Skid base in
round steel tubing, 12 mm (½") in
diameter, bright chrome plated.
The skid base supports the front
seat frame and integrates with
the backrest frame at the rear.
On request, with additional glides
in black polyamide for soft floors,
optionally with extra felt.
Please note for models 233/1, 233/2:
When ordering inline connectors
model 238, multi-purpose glides
are auto­matically applied, optionally with additional felt for floors that
are sensitive to scratching (e.g.
stone, parquet). Inline connectors
are not possible in model 231.
Counter and bar height stool
As for multi-purpose chair, but not
­stackable. Additional bright
chrome plated stretchers
(16 x 6 mm) (5/8" x ¼") that form
a stable structural grid, integrating a recessed footrest bar in
round steel rod.
Task chair and visitor chair
Four-star base (visitor chair) or fivestar base (task chair) in die-cast
­aluminium, bright chrome ­plated.
Visitor chair with glides in black
­polyamide (for soft floors) or black
polyurethane (for hard floors),
­optionally with additional felt
­insert. Task chair with twin wheel
swivel castors in black polypropy­
lene with load dependent braking
(for soft floors) or with a soft lining
(for hard floors); anti-static castors
on request. Fixed height swivel
pedestal with contact suppression
feature (visitor chair) or additional
infinitely height adjustable pedestal (task chair), bright chrome plated tube.
Seat and back
In models 231/1, 230/2, 230/5,
230/6 seat and back frames in highperformance, glass fibre-reinforced
polyamide, optionally throughdyed in black, grey or white, with
resilient coated polyester membrane optionally in the same colour
as the seat and back frames. In
through-dyed black seat and back
frames, optionally available with a
two-tone cover in copper-black or
silver-black. Back frame optionally
without armrests or with armrests
in matching material and colour.
Optionally with a polypropylene
seat shell and cut-foam seat cushion. Stackable types (only models
28
230 / 1 and 230 / 2) with glass-fibrereinforced polyamide bumper that
colour-matches the seat- and backrest frame.
Models 232 / 1, 232 / 2, 233/4, 233/6
Seat and back frame made of highperformance glass-fibre-reinforced
polyamide, optionally black or
white through-dyed, optionally
with or without armrests in the
some material and colour. Plastic
membrane made of through-dyed
polyamide like the seat and back
frame. Optionally with cut foam
seat cushion.
Stackable versions (only models
233/1 and 233/2) with glass-fibrereinforced bumpers in the same
colour as the seat and back frame.
Task and visitor chairs (models 232 / 1, 232 / 2, 231 / 1, 231 / 2)
optionally with cut-foam seat cushion, with cover in fluted stitching,
cushioning 10 mm thick.
Tables
Frame
Models 235/236
Four-star base in die-cast aluminium, bright chrome plated, with
glides in black polyamide (for soft
floors) or black polyurethane (for
hard floors), optionally with additional felt insert. Central column
in 4 mm (⅛") steel tube, diameter
40 mm (15/8"), for low, sitting and
standing height (45 / 73 / 105 cm)
(17¾"/ 28¾"/ 41⅜"), coated in
black or white to match top surface, with steel flange coated
black; stackable version additionally with slip-free separator, collar
and docking guide in black plastic.
Model 237/00
Unitary, die-cast aluminium foot
section, optionally bright chrome
plated, or coated in black or white.
Black polyamide glides (for soft
flooring), or black polyurethane
(for hard flooring), optionally with
additional felt insert. Aluminium
­upright to match table top, black or
white coated, or optionally bright
chrome plated. Underframes made
of rectangular steel tube with
flange, depending on the foot
­section, coated black or white.
If the foot section is bright chrome
plated, black coating.
Core material of table top
Models 235 / 236 / 237
Table top in through-dyed HPL
(high pressure laminate) in the
­colours black or white.
Each with thickness 12 mm (½").
Models 235 / 236 in sizes:
60 x 60 cm (235/8" x 235/8")
(for table heights 45 (17¾") and
105 cm (41⅜")) and
70 x 70 cm (27½" x 27½")
(for table heights 73 cm (28¾")) and
circular,
diameter 75 cm (29½")
(for table heights 45 (17¾") and
73 cm (28¾") and
diameter 70 cm (27½")
(for table height 105 cm (41⅜")).
Models 237 in sizes:
(Table height 73 cm (28¾"))
70 x 140 cm (27½" x 55⅛")
75 x 150 cm (29½" x 59")
80 x 160 cm (31½" x 63")
90 x 180 cm (35⅜" x 70⅞")
90 x 200 cm (35⅜" x 78¾")
Table top group 2 – veneer
Thickness 20 mm (¾")
Variation 1:
Beech or oak veneer according to
­Wilkhahn woodstain colour samples with wood lipping, as far as
possible in the same colour as the
veneer.
Variation 2:
Walnut or elm veneer, as well as
­Wilkhahn veneer Mocca ­according
to ­Wilkhahn woodstain colour
­samples with wood lipping, as far
as possible in the same colour as
the veneer.
Veneer version
As a standard, veneers are slipmatched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, walnut and elm
­veneer, as well as ­Wilkhahn veneer
Mocca.
Closed-pore: beech v­ eneer.
Some specific growth features
­possible.
With veneered version (on request):
MDF panel only in combination
with veneered surface finish with
colour-matched, chamfered wood
lipping (with a radiused edge).
­Exception: maple or ash with a
­natural finish is not available.
Tables
Round pedestal tables in four
­different formats (Ø 90 – 140 cm)
for large conferences, meetings or
as home dining tables.
Frame versions
ulti-purpose and counter
M
chairs
Frame
51
Frame models 237/2, 4, 5
Steel disc base (610 mm (24") in
­diameter) with sheet-steel cover
coated white or black or with
­optional cover in lustre-polished
stainless steel.
Frame model 237/6
Steel disc base (735 mm (28⅞") in
diameter) with sheet-steel cover
coated white or black with optional
cover in lustre-polished stainless
steel.
Accessories
Models 237/2, 4, 5, 6
Optionally for the multi-purpose
chair: Automatically retractable inline connectors (only models 230/1,
230/2) made of matt chrome-­
plated steel. In-line connectors for
models 233/1, 233/2 are available
only in conjunction with multi-­
purpose glides made of black POM
for hard and soft flooring, or with
felt insert for floors susceptible to
scratching. Chairs with armrests
can only be linked alternately with
chairs without armrests. Stackable
four-wheeled trolley made of blackcoated steel tubing with four ballbearing mounted castors for hard
and soft flooring, two of which are
lockable directional wheels.
­ able column made of steel tubing
T
(80 mm (3⅛") in diameter) coated
white or black, optionally bright
chrome plated. Table top bearer
made of rectangular tubing coated
black.
Standards
Aline stackable chairs conform
to the Office Chair Standard DIN
EN 13761 and ANSI/­BIFMA X 5.1.
Aline-S currently being prepared
for DIN EN 16039-L1.
Table column made of steel tubing
(80 mm (3⅛") in diameter) coated
white or black, optionally bright
chrome plated. Table top bearer
made of rectangular tubing coated
black.
Core material of table top
MDF table top (medium-density
­fibreboard), white, or black powder
coated with chamfered edge. Each
table top 25 mm (1") thick.
Bright chrome plated
Task chair and visitor chair Frame
51
Bright chrome plated
Tables (235 / 1 – 236 / 3)
Star base
Table column
51
Bright chrome plated
Coated, black or white
Tables (237 / 00)
Foot sections
Upright
Underframe
49
Coated white
Coated white
Coated white
51
Bright chrome plated
Coated black
53
Coated black
Black coated or bright
chrome plated
Coated black
Tables (237 / 2, 4, 5, 6)
Disc base with cover
Table column
Table top bearer
49
Coated white
Coated white
Coated black
53
Coated black
Coated black
Coated black
71
Polished stainless steel
coated or bright chrome
plated
Coated black
Coated black
€
Accessories
231 Inline connector (for models 230/1 and 230/2)
232 Four-wheeled trolley for 20 multi-purpose chairs
234 Seat/row number clip (for models 230/1 and 230/2)
235 Sheets of self-adhesive labels for numbering 1 set (1 – 400 for seats and 1 – 100 for rows)
236 Four-wheeled trolley for 16 multi-purpose chairs with seat cushion
238 Inline connector (for models 233/1 and 233/2)
42
545
9
19
545
32
29
Upholstery material
47
54
60
63
66
67
Aline-S
Chairs
€
Multi-purpose chair
¡ 44 ¶ 78 ¢ 54 | 58
(¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
233/1
Multi-purpose chair, up to 15-high free-standing,
Seat and back frame with plastic membrane
Frame bright chrome plated
Additional charges
Inline connector *
Higher backrest (overall height 80 cm, 31½")
Seat cushion
Seat cushion, stackable version, up to 10 chairs
Multi-purpose chair
¡ 44 ¶ 78 ¢ 59 | 58
(¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
233/2
With armrests
Multi-purpose chair, up to 15-high free-standing,
Seat and back frame with plastic membrane
Frame bright chrome plated
Additional charges
Inline connector *
Higher backrest (overall height 80 cm, 31½")
Seat cushion
Seat cushion, stackable version, up to 10 chairs
Counter/bar height stool
¡ 69 ¶ 105 ¢ 54 | 61
(¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
233/4
Footrest,
Seat and back frame with plastic membrane
Frame bright chrome plated
233/6
With armrests
Footrest,
Seat and back frame with plastic membrane
Frame bright chrome plated
Additional charge
Seat cushion
€
€
109
126
122
139
134
151
109
126
122
139
134
151
109
122
134
109
122
134
230
32
17
270
32
17
340
Additional charge
Seat cushion
Counter/bar height stool
¡ 69 ¶ 105 ¢ 54 | 61
(¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
€
380
€
Additional charges/reduced prices
specific to range
Glides for soft floors
Glides with felt insert
* Inline connectors only possible in combination with special multi-purpose glides
All chairs are suitable for soft floors (e.g. carpet). On request, with glides in black polyamide if used on different types of flooring, optionally with additional felt
insert (for scratch-sensitive floors such as stone, parquet). When linked, stackable chairs with armrests must alternate with stackable chairs without armrests.
30
8
12
Upholstery material
47
54
60
63
66
67
Aline
Chairs
€
Multi-purpose chair
¡ 44 ¶ 78 ¢ 54 | 58
(¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
230/1
Multi-purpose chair, up to 15-high free-standing,
Seat and back frames with membrane
Frame bright chrome plated
Additional charges
Inline connector
Higher backrest (overall height 80 cm, 31½")
Seat cushion
Seat cushion, stackable version, up to 10 chairs
Multi-purpose chair
¡ 44 ¶ 78 ¢ 59 | 58
(¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
230/2
With armrests
Multi-purpose chair, up to 15-high free-standing,
Seat and back frames with membrane
Frame bright chrome plated
Additional charges
Inline connector
Higher backrest (overall height 80 cm, 31½")
Seat cushion
Seat cushion, stackable version, up to 10 chairs
Counter/bar height stool
¡ 69 ¶ 105 ¢ 54 | 61
(¡ 27⅛" ¶ 41⅜" ¢ 21¼" | 24")
230/5
Footrest,
Seat and back frames with membrane
Frame bright chrome plated
230/6
With armrests
Footrest,
Seat and back frames with membrane
Frame bright chrome plated
Additional charge
Seat cushion
€
€
93
110
106
123
119
137
93
110
106
123
119
137
93
106
119
93
106
119
338
41
17
378
41
17
448
Additional charge
Seat cushion
Counter/bar height stool
¡ 69 ¶ 105 ¢ 59 | 61
(¡ 27⅛" ¶ 41⅜" ¢ 23¼" | 24")
€
488
€
Additional charges/reduced prices
specific to range
Polyester material in copper/black or silver/black
(with black through-dyed seat and back frame only)
Outdoor version
Glides for soft floors
Glides with felt insert
23
13
8
12
All chairs are suitable for soft floors (e.g. carpet). On request, with glides in black polyamide if used on different types of flooring, optionally with additional felt
insert (for scratch-sensitive floors such as stone, parquet). When linked, stackable chairs with armrests must alternate with stackable chairs without armrests.
31
Aline
Task/visitor chairs
€
Task chair
¡ 40/52 ¶ 76/88 ¢ 65 | 64
(¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")
232/1
Seat and back frames with membrane,
Infinitely variable height adjustment
Frame bright chrome plated
542
Additional charges
Higher backrest (overall height 78/90 cm, 30¾"/35⅜")
Anti-static castors
Task chair
¡ 40/52 ¶ 76/88 ¢ 65 | 64
(¡ 15¾"/20½" ¶ 29⅞"/34⅝" ¢ 25⅝" | 25¼")
232/2
With armrests,
Seat and back frames with membrane,
Infinitely variable height adjustment
Frame bright chrome plated
17
40
582
Additional charges
Higher backrest (overall height 78/90 cm, 30¾"/35⅜")
Anti-static castors
Visitor chair
¡ 45 ¶ 80 ¢ 50 | 57
(¡ 17¾" ¶ 31½" ¢ 19⅝" | 22½")
Visitor chair
¡ 45 ¶ 80 ¢ 59 | 57
(¡ 17¾" ¶ 31½" ¢ 23¼" | 22½")
231/1
Seat and back frames with membrane
Frame bright chrome plated
17
40
519
Additional charge
Higher backrest (overall height 82 cm, 32¼")
231/2
With armrests,
Seat and back frames with membrane
Frame bright chrome plated
17
559
Additional charge
Higher backrest
(overall height 82 cm, 32¼", armrests not below table height)
17
€
Additional charges/reduced prices
specific to range
Polyester material in copper/black or silver/black
(with black through-dyed seat and back frame only)
Seat cushion with cover with stitched fluting (in combination with upholstery material
47 only)
23
111
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). All visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet),
please specify additional felt insert when ordering (both with no additional charge).
32
Table top group
7
7
Black through-dyed
White through-dyed
Aline
Tables
€
€
512
601
22
22
593
748
39
39
235/3
High table 60 x 60, H 105 (23⅝" x 23⅝", H 41⅜")
Star base bright chrome plated
Coated column
540
629
Additional charges
Central column bright chrome plated
Stackable design (up to 3 free-standing)
58
121
58
121
236/1
Low table, circular, Ø 75, H 45 (Ø 29½", H 17¾")
Star base bright chrome plated
Coated column
588
743
22
22
596
751
39
39
236/3
High table, circular, Ø 70, H 105 (Ø 27½", H 41⅜")
Star base bright chrome plated
Coated column
609
764
Additional charges
Central column bright chrome plated
Stackable design (up to 3 free-standing)
58
121
58
121
235/1
Low table 60 x 60, H 45 (23⅝" x 23⅝", H 17¾")
Star base bright chrome plated
Coated column
Additional charge
Central column bright chrome plated
235/2
Table 70 x 70, H 73 (27½" x 27½", H 28¾")
Star base bright chrome plated
Coated column
Additional charge
Central column bright chrome plated
Additional charge
Central column bright chrome plated
236/2
Table circular, Ø 75, H 73 (Ø 29½", H 28¾")
Star base bright chrome plated
Coated column
Additional charge
Central column bright chrome plated
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify
additional felt insert when ordering (both with no additional charge).
33
Table top group
9
MDF black or white powder
coated
Aline
Tables
€
237/2
Table, Ø 90 cm, height 73 cm (Ø 35⅜", H 28¾")
Coated disc base
Coated column
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
145
237/4
Table, Ø 110 cm, H 73 cm (Ø 43¼", H 28¾")
Coated disc base
Coated column
971
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
237/5
Table, Ø 125 cm, H 73 cm (Ø 49¼", H 28¾")
Coated disc base
Coated column
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
237/6
Table, Ø 140 cm, H 73 cm (Ø 55⅛", H 28¾")
Coated disc base
Coated column
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
34
767
83
83
145
1082
83
145
1542
100
162
Table top group
White through-dyed
€
859
1069
59
•
•
140
•
•
237/00
e.g. 75 x 150, H 73 (29½" x 59", H 28¾")
Foot sections coated
Uprights and under-frames coated
Additional charges/reduced prices
specific to range
Foot sections bright chrome plated, uprights coated, under-frames coated
Foot sections bright chrome plated, uprights bright chrome plated, under-frames
coated
7
€
€
Rectangular
7
Black through-dyed
Aline
Tables
Depth
Length
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
70
(27½")
856
–
–
–
–
75
(29½")
–
859
–
–
–
80
(31½")
–
–
864
–
–
90
(35⅜")
–
–
–
952
957
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
1053
–
–
–
–
1069
–
–
–
–
–
1085
–
–
–
–
–
1233
1250
– not available
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g. parquet), please specify
additional felt insert when ordering (both with no additional charge).
35
240 range
Sito
Design: wiege
Technical details
Function
Multi-purpose cantilever chair,
­optionally stackable, with three
backrest heights and many upholstery variations for a wide range of
applications. Springy and resilient
due to structural configuration of
cantilevered seat and backrest.
Frame
Frame in round steel tube,
Ø 22 mm (⅞"). Brace in 6 mm (¼")
flat steel to support cantilevered
seat and back shells, bright chrome
plated, matt ­chrome plated or coated. Stand­ard version for carpeted
floors with anti-tilt stoppers; with
additional glides for hard floors, on
request with an additional felt insert. Stackable versions are available with a bright chrome plated
frame only.
All models may additionally be fitted with a writing tablet (models
240 / 3, 241 / 3) in black plastic,
which still allows chairs to be linked
with inline connectors or stacked.
Seat and back
Models 240/3 and 241/3
Seat and back in black-grey or
white through-dyed, viscoelastic
polypropylene. Seat with covered,
one-piece moulded polyurethane
foam, exchangeable; optional back
cushion with covered, polyurethane cut foam.
Model 244/55
with Club ­upholstery
Seat and back made of viscoelastic
polypropylene, covered on the
back. Seat cushion exchangeable
with covered polyurethane moulded foam section, with additional
cut foam section and padding. Back
cushioning exchangeable with
­covered polyether cut foam section
and padding.
Armrests
Armrest pads in black or white
through-dyed polypropylene, or
plywood with a beech face veneer
with a natural finish, or stained in
84/83 grey or 84/89 dark grey, or
maple face veneer with a natural
finish. Upholstered armrests with
black leather cover 74 / 99 for fabric
cover, in the same colour leather for
leather cover (models 240 / 51 and
241 / 51 leather-covered only).
Standards
Sito cantilever chairs comply
with office chair standards
DIN EN 13761, DIN EN 16139-L1, DIN
EN 1728 and ANSI/BIFMA X5.1.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Model 245/55
Seat made of viscoelastic poly­
propylene, covered on the back.
Seat cushion exchangeable with
covered polyurethane moulded
foam section, with additional cut
foam section and padding. Back
made of moulded plywood. Back
cushion with covered polyether
cut foam section and padding.
Models 247/55 and 248/55
with soft fill cushions
Seat and back in moulded plywood. Seat with covered, onepiece moulded polyurethane foam;
back with covered, polyurethane
cut foam cushion, front of backrest
addition­ally with concealed, cut
foam fleece sewn into the cover.
Frame versions
51
53
58
60
Bright chrome plated
Coated black
Matt chrome plated
Coated, silver satin finish
€
Accessories
36
240 Writing tablet (right or left side)
242 Inline connector
243 Four-wheeled trolley for eight stackable cantilever chairs
310 Seat numbers
170
13
584
3
Sito
Cantilever chairs
Low backrest
¡ 43 ¶ 77 ¢ 59 | 56
(¡ 16⅞" ¶ 30⅜" ¢ 23¼" | 22")
54
240/3
With seat cushion, backrest not upholstered,
Polypropylene armrest pads
Frame coated
Additional charges
Back cushion
Seat/back shell and armrest pad through-dyed white
Stackable version (in combination with frame bright chrome
plated only, stackable 7‑high free-standing, up to 8‑high on
four-wheeled trolley)
Medium-height backrest
¡ 43 ¶ 87 ¢ 59 | 57
(¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
241/3
With seat cushion, backrest not upholstered,
Polypropylene armrest pads
Frame coated
Additional charges
Back cushion
Seat/back shell and armrest pad through-dyed white
Stackable version (in combination with frame bright chrome
plated only, stackable 7‑high free-standing, up to 8‑high on
four-wheeled trolley)
Medium-height backrest
¡ 43 ¶ 87 ¢ 59 | 56
(¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22")
241/51
Club upholstery, fully upholstered,
With wool fleece underlay and side facings,
Cushioned armrest pads,
Leather-covered with triple-sewn seam
Frame coated
Upholstery material
60
74
87
62
63
66
67
69
€
€
€
473
486
619
74
29
74
29
146
29
44
44
44
543
556
689
74
29
74
29
175
29
44
44
44
1477
€
1722
€
Additional charges/reduced prices
specific to range
Frame bright chrome plated
Frame matt chrome plated
29
85
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
37
Upholstery material
60
74
63
66
67
Sito
Cantilever chairs
Medium-height backrest
¡ 43 ¶ 87 ¢ 59 | 57
(¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
High backrest
¡ 43 ¶ 97 ¢ 59 | 58
(¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")
Medium-height backrest
¡ 43 ¶ 87 ¢ 59 | 57
(¡ 16⅞" ¶ 34¼" ¢ 23¼" | 22½")
High backrest
¡ 43 ¶ 97 ¢ 59 | 58
(¡ 16⅞" ¶ 38¼" ¢ 23¼" | 22⅞")
244/55
With seat and back cushion,
fully upholstered,
Polypropylene armrest pads
Frame coated
245/55
With seat and back cushion,
fully upholstered,
Polypropylene armrest pads
Frame coated
247/55
Soft fill cushions, fully upholstered,
Polypropylene armrest pads
Frame coated
248/55
Soft fill cushions, fully upholstered,
Polypropylene armrest pads
Frame coated
€
€
828
1086
880
1181
872
1130
924
1225
€
Additional charges/reduced prices
specific to range
Frame bright chrome plated
Frame matt chrome plated
Laminated wood armrest pads
Cushioned armrest pads
29
85
88
208
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
38
249 range
Cura
Design: wiege
Technical details
Function
With a lightweight appeal, these
classically elegant lounge chairs
and low tables are designed to furnish lounges, lobbies, informal
meeting spaces or homes.
Chair
Tables
Frame
Model 249 / 5
Resilient, bright chrome plated
steel tube, diameter 25 mm (1"),
thick­ness 3 mm (⅛") attached to
flat steel support­ing frame, width
25 mm (1"), thickness 6 mm (2/8").
Four glides in black-grey polyamide
are standard (for soft floors); op­
tion­ally in black-grey polyurethane
(for hard floors), on request with
additional felt insert.
Frame
Bright chrome plated steel tube, diameter 25 mm (1"), thickness 3 mm
(⅛"). Four glides in black-grey polyamide are standard (for soft floors);
­optionally in black-grey
­poly­ure­thane (for hard floors), on
request with ­additional felt insert.
Model 249 / 7
Die-cast aluminium, high-lustre
­polished, four-star base with rigid
column and steel, bright chrome
plated seat bearer. Black multi-­
purpose plastic glides for all types
of flooring.
Upholstery
Steel frame in square tube with
­tension springs embedded in polyurethane foam. Exchangeable,
­one-piece cover with side facings
in high-quality woollen fabric or
leather.
Armrests (only model 249 / 5)
Armrests with contacts in plywood
with fully upholstered pads to
match the seat or with walnut face
veneer, stained and protected with
open-pore lacquer.
Stool
Frame
Die-cast aluminium, high-lustre
­polished, star base with rigid column and steel, bright chrome plated seat bearer.
Black, multi-purpose plastic glides
for all types of flooring.
Seat
Shaped plywood shell with seating
cushion, fully covered.
Core material of table top
Particle board, depending on the
surface finish with straight, colourmatched plastic lipping or straight,
colour-matched wood lipping.
Table top group 1 – laminate
Table top thickness 20 mm (¾")
Laminate according to ­Wilkhahn
laminate colour samples (white,
light grey or dark grey) with plastic
­lipping in the same colour as the
­table top.
When placing repeat orders,
please indicate whether your
­table tops have slip-matched
or book-matched veneer.
Standards
The Cura chairs and stools comply
with the DIN EN 13761 office chair
standard and DIN EN 1728.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Table top group 2 – veneer
Table top thickness 20 mm (¾")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour samples with wood lipping, as far
as possible in the same colour as
the veneer.
Variation 2:
Maple, walnut or elm veneer, as
well as ­Wilkhahn veneer Mocca
­according to ­Wilkhahn woodstain
colour samples with wood lipping,
as far as possible in the same colour
as the veneer.
Veneer version
As a standard, veneers are slip
matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple, beech veneer.
Some specific growth features
­possible.
39
Upholstery material
60
74
87
63
66
67
Cura
Chairs
Cantilever chair
¡ 35 ¶ 75 ¢ 70 | 71
(¡ 13¾" ¶ 29½" ¢ 27½" | 28")
249/5
Armrest pads in walnut
Frame bright chrome plated
Additional charge
Armrests fully upholstered to match the seat covers
Chairs
¡ 35 ¶ 75 ¢ 59 | 71
(¡ 13¾" ¶ 29½" ¢ 23¼" | 28")
249/7
High-lustre polished frame
Stool
249/8
60 x 50, H 41 (23⅝" x 19⅝", H 16⅛")
High-lustre polished frame
€
€
€
1387
1675
1951
82
158
196
1160
1448
1724
687
825
956
Low tables
Veneer variation
Low table
Veneer variation
Low table
Table top group
1
2
Laminate
1
€
€
€
249/1
54 x 54, H 36 (21¼" x 21¼", H 14⅛")
Frame bright chrome plated
490
739
768
249/3
60 x 150, H 36 (23⅝" x 59", H 14⅛")
Frame bright chrome plated
617
901
970
All cantilever chairs, armchairs and tables are fitted with four glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden
floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Stool with multi-purpose glides.
40
26 range
Modus Basic
Design: Klaus Franck, Werner Sauer and
wiege, Fritz Frenkler, Justus Kolberg
Technical details
Function
Task chairs with backrest shell and
automatic synchro-adjustment: the
seat and backrest angle adjusts automatically to position of the person sitting on chair. When leaning
back, the backrest tension increases
proportionately. The person sitting
on the chair adjust the tension infinitely. The chair can be locked in
the front position by engaging a lever. Gas lift compliant with
DIN 4550 for infinite seating height
adjustment.
Frame
Backrest
Task chairs
Five-star, die-cast aluminium star
base, coated, polished or bright
chrome plated.
Twin wheel swivel castors in black
polyamide with load-dependent
braking, compliant with
DIN EN 12529, as the standard version for carpeted floors, or with
a grey polyurethane soft cover for
hard floors. Anti-static castors on
request.
Die-cast aluminium swing plates,
coated in the same colour to match
the star base, polished or bright
chrome plated. Black-coated steel
sheet shell for the technology.
Task chairs
Backrest shell in black throughdyed, viscoelastic polypropylene
with exchangeable back cushion in
covered, cut foam. On request, with
integral, adjustable lumbar support.
Armrests
Task chairs
Armrests in black, glass-fibre-reinforced polyamide.
Task chair model 263/7 optionally
with height adjustable armrests in
the same material.
Seat
Seat shell in black, viscoelastic polypropylene. Seat upholstery: one-piece moulded polyurethane foam
with exchangeable cover. Side facing: black polyamide for fabric cover and embossed leather in the
same colour for leather cover.
Frame versions
Small components
Standards
Modus Basic task chairs conform to
the Office Chair Stand­ard
DIN EN 1335, ANSI / BIFMA X 5.1,
BS 5459 and other international
­office chair standards.
They meet the requirements of
­category B of the Office Chair
Standard DIN EN 1335.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Task chairs
Star base and swing arms
51
52
53
60
Bright chrome plated
Aluminium polished
Coated black
Coated, silver satin finish
Castors, glides, frame components, adjustment levers
41
Black
41
Upholstery material
54
60
74
62
63
66
67
69
Modus Basic
Task chairs
Standard height backrest
¡ 42/53 ¶ 91/102 ¢ 64 | 61
(¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")
€
€
€
263/7
With seat and back cushion,
With armrests,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
941
984
1365
Additional charge/reduced prices
Frame aluminium polished
Frame aluminium bright chrome plated
Height adjustable armrests
Height-adjustable lumbar support
Anti-static castors
Without armrests
43
119
106
59
40
– 86
43
119
106
59
40
– 86
43
119
106
59
40
– 86
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors.
42
27 range
Modus Compact
Design: Klaus Franck, Werner Sauer and
wiege, Fritz Frenkler, Justus Kolberg
Technical details
Function
Task chairs with frame covering and
automatic synchro-adjustment: the
seat / backrest angle adjusts
­automatically to the sitting position
of the user. When leaning back, the
backrest tension increases according to the need for additional support. Infinitely variable tension adjustment for the user. Forward
position lockable by engag­ing lever. Gas lift, conforming to
DIN 4550, for infinitely variable adjustment of seat height.
Conference chairs / visitor chairs,
swivel, with automatic synchro-­
adjustment, without front locking
position, with fixed seat height,
­alternatively also available in a
­four-legged version or in a cantilever version, optionally stackable.
Frame
Task, conference and
visitor chairs
Die-cast aluminium star base,
­coated, polished or bright ­chrome
plated.
Twin wheel swivel castors in black
polyamide with load-dependent
braking, conforming to
DIN EN 12529, as the standard
­version for carpeted floors, or with
a grey polyurethane soft lining for
hard floors. Anti-static castors on
­request. Glides in black polyamide
as the standard version for carpeted floors, or in black polyurethane
for hard floors. Die-cast aluminium
swivel plates, coated to match the
star base, polished or bright
chrome plated. Synchro-mechanism case in sheet steel, coated
black.
Frame versions
Small components
Accessories
Visitor chair, four-legged:
Legs in oval aluminium tube, bright
chrome plated, clear anodized or
coated. Black polyamide glides as
the standard version for carpeted
floors, or in black polyurethane for
hard floors, optionally with additional felt insert.
Cantilever chairs
Steel tube frame, bright chrome
plated, matt chrome plated or coated, with anti-tilt stoppers as the
stand­ard version for carpeted
floors: with additional glides for
hard floors, optionally with additional felt insert. The stackable version is available with a bright
chrome plated frame only.
Seat
Seat shell in black, viscoelastic
­polypropylene. Seat upholstery:
one-piece moulded polyurethane
foam with exchangeable cover.
Side facing: black polyamide for
fabric cover and embossed leather
in the same colour for leather cover.
Backrests
Task, conference and
visitor chairs
Frame in black, glass fibre-reinforced polyamide. Exchangeable
frame covering in black polyamide
fabric, non-transparent or trans­
parent. Non-transparent material
optionally covered on the front
and with cut foam underlay.
Standard and medium-height
backrest with a crescent shaped
grip covered in black embossed
leather for fabric cover; in the same
colour leather for leather cover.
High backrest with a shoulder support with a forward curvature, covered in ­embossed leather for fabric
cover; in the same colour leather
for leather cover. Backrests of task
chairs 273, 274 and 275 optionally
with integral, adjustable lumbar
support (not possible for version
with transparent material).
Cantilever chairs
Frame in steel tube, bright chrome
plated, matt chrome plated or
­coated.
Exchangeable frame covering in
black polyamide fabric, non-transparent or transparent. Non-transparent material optionally ­covered
on the front and with cut foam
­underlay.
Cantilever chairs 277/7 and 279/7
with a crescent shaped grip in black
polypropylene; version with semi
transparent material with a crescent shaped grip covered in black
embossed leather for fabric or
leather cover. Covered backrest
with crescent shaped grip in black
embossed leather for fabric cover;
in the same colour leather for
­leather cover.
Armrests
Task, conference and
visitor chairs
Armrests in black, glass fibre-reinforced polyamide, optionally height
adjustable.
Cantilever chairs
Armrest pads in black polypropylene or laminated beech, natural
finish.
Standards
Modus Compact task chairs and
conference chairs / visitor chairs
conform to the Office Chair Stand­
ard DIN EN 1335, ANSI / BIFMA X
5.1, BS 5459 and other international
office chair standards.
They meet the requirements of category B of the Office Chair Standard DIN EN 1335.
Modus cantilever chairs
and four-legged visitor chairs
­conform to DIN EN 16139 - L1 and
ANSI / BIFMA X 5.1.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Visitor chairs, four-legged
Armrests in black, glass fibre-­
reinforced polypropylene.
Task chairs
51
52
53
60
tar base, swing plates
S
Bright chrome plated
Aluminium polished
Coated black
Coated, silver satin finish
Visitor chairs
51
53
60
62
Oval aluminium tube frame
Bright chrome plated
Coated black
Coated, silver satin finish
Clear anodized
Cantilever chair
51
53
60
Round steel tube frame
Bright chrome plated
Coated black
Coated, silver satin finish
Castors, glides, frame components, adjustment levers
41
Black
277 Four-wheeled trolley
for 6 stackable cantilever chairs
€
538
43
Upholstery material
54
60
74
62
63
66
67
69
Modus Compact
Task chairs
Standard height backrest
¡ 42/53 ¶ 91/102 ¢ 64 | 61
(¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 25¼" | 24")
273/7
With seat cushion,
Backrest with non-transparent material,
With armrests,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
Medium-height backrest
¡ 42/53 ¶ 98/109 ¢ 64 | 61
(¡ 16½"/20⅞" ¶ 38⅝"/42⅞" ¢ 25¼" | 24")
275/7
With seat cushion,
Backrest with non-transparent material,
With armrests,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
High backrest
¡ 42/53 ¶ 106/117 ¢ 64 | 61
(¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")
274/7
With seat cushion,
Backrest with non-transparent material,
With armrests,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
€
€
€
1101
1131
1383
43
75
59
88
209
235
1146
1176
1428
75
75
88
88
252
235
1363
1393
1645
75
75
88
88
252
235
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium bright chrome plated
43
119
Height adjustable armrests
Transparent material (without additional charge)
Height-adjustable lumbar support
Anti-static castors
106
–
59
40
Without armrests
– 86
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.
44
Upholstery material
54
60
74
62
63
66
67
69
Modus Compact
Conference/visitor chairs
Standard height backrest
¡ 46 ¶ 95 ¢ 64 | 61
(¡ 18⅛" ¶ 37⅜" ¢ 25¼" | 24")
Medium-height backrest
¡ 46 ¶ 102 ¢ 64 | 61
(¡ 18⅛" ¶ 40⅛" ¢ 25¼" | 24")
Standard height backrest
¡ 43 ¶ 88 ¢ 57 | 56
(¡ 16⅞" ¶ 34⅝" ¢ 22½" | 22")
€
€
€
271/7
Swivel-mounted,
With seat cushion,
Backrest with non-transparent material,
With armrests,
Automatic synchro-adjustment, tension control
Frame aluminium coated
1017
1047
1299
Additional charge/reduced prices
Frame aluminium polished
Frame aluminium bright chrome plated
Transparent material (without additional charge)
Backrest upholstered on the front
Backrest covered on outer side
Without armrests
43
119
–
43
75
– 86
43
119
–
59
88
– 86
43
119
–
209
235
– 86
272/7
Swivel-mounted,
With seat cushion,
Backrest with non-transparent material,
With armrests,
Automatic synchro-adjustment, tension control
Frame aluminium coated
1062
1092
1344
Additional charges
Frame aluminium polished
Frame aluminium bright chrome plated
Transparent material (without additional charge)
Backrest upholstered on the front
Backrest covered on outer side
43
119
–
75
75
43
119
–
88
88
43
119
–
252
235
276/7
Backrest with non-transparent stretch material
Frame aluminium coated
755
785
1037
Additional charges
Frame aluminium clear anodized
Frame aluminium bright chrome plated
Transparent material
Backrest upholstered on the front
Backrest covered on outer side
43
131
30
43
75
43
131
30
59
88
43
131
30
209
235
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Semi-transparent backrest not available in
combination with back cushion.
45
Upholstery material
54
60
74
62
63
66
67
69
Modus Compact
Cantilever chairs
Standard height backrest
¡ 43 ¶ 85 ¢ 57 | 56
(¡ 16⅞" ¶ 33½" ¢ 22½" | 22")
277/7
Backrest with non-transparent material,
Polypropylene armrests
Frame coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
Medium-height backrest
¡ 43 ¶ 92 ¢ 57 | 56
(¡ 16⅞" ¶ 36¼" ¢ 22½" | 22")
279/7
Backrest with non-transparent material,
Polypropylene armrests
Frame coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
€
€
€
651
681
933
43
75
59
88
209
235
695
725
977
75
75
88
88
252
235
€
Additional charges/reduced prices
specific to range
Frame bright chrome plated
Frame matt chrome plated
Armrests with embossed leather pad (cannot be offered
on stackable version)
Wooden armrests
Transparent material
Stackable version (in combination with frame bright
chrome plated only, stackable 5‑high free-standing)
30
88
164
90
30
71
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in
combination with back cushion.
46
28 range
Modus Medium
Design: Klaus Franck, Werner Sauer and
wiege, Fritz Frenkler, Justus Kolberg
Technical details
Function
Task chairs with backrest with
stretch material and automatic synchro-adjustment: the seat / backrest angle adjusts automatically to
the sitting position of the user.
When leaning back, the backrest
tension increases according to the
need for additional support. Infinitely variable tension adjustment
for the user. Forward position lockable by engaging lever. Gas lift,
conforming to DIN 4550, for infinitely variable ­adjustment of seat
height.
Swivel-mounted conference / visitor
chairs with automatic synchro adjustment and infinitely variable
height adjustment, optionally with
rigid, four-arm seat bearer; alternatively also as a cantilever version.
Frame
Task chairs
Die-cast aluminium star base,
­coated, polished or bright ­chrome
plated.
Conference/visitor chairs with
­four-star base in die-cast aluminium, coated, polished or bright
­chrome plated.
Twin wheel swivel castors in black
polyamide with load-dependent
braking, conforming to
DIN EN 12529, as the standard
­version for carpeted floors, or with
a grey polyurethane soft lining for
hard floors. Anti-static castors on
­request. Glides in black polyamide
as the standard version for carpeted floors, or in black polyurethane
for hard floors. Die-cast aluminium
swing plates, coated to match the
star base, polished or bright
chrome plated. Synchro-mechanism case in sheet steel, coated
black.
Frame versions
Small components
Conference chairs / visitor chairs
Model 281/5 with four‑arm seat
bearer in die-cast aluminium,
­coated in the same colour, polished
or bright chrome plated to match
star base.
Cantilever chairs
Steel tube frame, bright chrome
plated, matt chrome plated or coated, with anti-tilt stoppers as the
stand­ard version for carpeted
floors: with additional glides for
hard floors, optionally with additional felt insert.
Seat
Seat shell in black, viscoelastic
­polypropylene. Seat upholstery:
one-piece moulded polyurethane
foam with exchangeable cover.
Side facing: black polyamide for
fabric cover and embossed leather
in the same colour for leather cover.
Backrests
Task and conference chairs
Frame in black, glass fibre-reinforced polyamide. Exchangeable
frame covering in black polyamide
material, non-transparent or transparent, non-transparent version
with underpadding. Non-trans­
parent material optionally additionally covered on the front and with
cut foam ­underlay.
Standard backrest with a crescent
shaped grip covered in black
­embossed leather for fabric cover;
in the same colour leather for
­leather cover.
High backrest with a shoulder
­support with a forward curvature,
covered in embossed leather for
fabric cover; in the same colour
leather for leather cover. Task chairs
optionally available with height-adjustable lumbar support.
Cantilever chairs
Steel tube frame, bright chrome
plated, matt chrome plated or
­colour coated.
Exchangeable frame covering in
black polyamide material, nontransparent or transparent. Nontransparent material optionally
­covered on the front and with cut
foam underlay.
Crescent shaped grip covered in
black embossed leather for fabric
cover; in the same colour leather
for leather cover.
Standards
Modus Medium task chairs and
conference chairs / visitor chairs
conform to the Office Chair Standard DIN EN 1335, ANSI / BIFMA X
5.1, BS 5459 and other international
­office chair standards.
They meet the requirements of
­category C of the Office Chair
Standard DIN EN 1335.
Modus cantilever chairs
conform to DIN EN 16139 - L1 and
ANSI / BIFMA X 5.1.
Armrests
Task and visitor chairs
Armrests in black, textured,
glass ­fibre-reinforced polyamide.
On request, with black, embossed
leather pad for fabric cover; in
the same colour leather for leather
cover.
On request, with armrests in
­die-cast aluminium, aluminium
­polished or bright chrome plated
with black leather pad for fabric
cover; in the same colour leather
for leather cover.
Cantilever chairs
Armrest pads in laminated beech,
natural finish, optionally in poly­
propy­lene with black, embossed
leather pad for fabric cover; in
the same colour leather for leather
cover.
Task chair and visitor chair
Star base, swing plates
51
52
53
60
Bright chrome plated
Aluminium polished
Coated black
Coated, silver satin finish
Cantilever chair
Round steel tube frame
51
53
60
Bright chrome plated
Coated black
Coated, silver satin finish
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Castors, glides, frame components, adjustment levers
41
Black
47
Upholstery material
54
60
74
62
63
66
67
69
Modus Medium
Task chairs
Standard height backrest
¡ 42/53 ¶ 91/102 ¢ 68 | 63
(¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 24¾")
283/7
With seat cushion,
Backrest with non-transparent material,
Armrests polyamide,
Automatic synchro-adjustment, tension control,
Infinitely variable height adjustment
Frame aluminium coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
High backrest
¡ 42/53 ¶ 112/123 ¢ 68 | 63
(¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 24¾")
284/7
With seat cushion,
Backrest with non-transparent material,
Armrests polyamide,
Automatic synchro-adjustment, tension control,
Infinitely variable height adjustment
Frame aluminium coated
Additional charges
Backrest upholstered on the front
Backrest covered on outer side
€
€
€
1623
1653
1931
186
74
205
87
494
233
1945
1975
2253
217
74
231
87
641
233
€
Additional charges/reduced prices
specific to range
Frame aluminium polished
Frame aluminium bright chrome plated
43
119
Transparent material
Armrests with embossed leather pad
Armrests aluminium polished with leather pad
(in combination with frame aluminium polished)
Armrests aluminium bright chrome plated with leather pad
(in combination with frame bright chrome plated)
Lumbar support for task chairs
Anti-static castors
30
190
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors. Transparent backrest not available in combination with back cushion and/or lumbar support.
48
250
334
59
40
Upholstery material
54
60
74
62
63
66
67
69
Modus Medium
Conference/visitor chairs
Standard height backrest
¡ 45 ¶ 94 ¢ 61 | 59
(¡ 17¾" ¶ 37" ¢ 24" | 23¼")
Standard height backrest
¡ 45/56 ¶ 94/105 ¢ 61 | 59
(¡ 17¾"/22" ¶ 37"/41⅜" ¢ 24" | 23¼")
€
€
€
281/5
Swivel-mounted, with rigid seat bearer,
With seat cushion,
Backrest with non-transparent material,
Armrests polyamide
Frame aluminium coated
1117
1147
1425
Additional charges
Frame aluminium polished
Frame aluminium bright chrome plated
Backrest upholstered on the front
Backrest covered on outer side
43
205
186
74
43
205
205
87
43
205
494
233
1540
1570
1848
43
119
186
74
43
119
205
87
43
119
494
233
281/6
Swivel-mounted, with seat cushion,
Backrest with non-transparent material,
Armrests polyamide,
Automatic synchro-adjustment, tension control,
Infinitely variable height adjustment
Frame aluminium coated
Additional charges
Frame aluminium polished
Frame aluminium bright chrome plated
Backrest upholstered on the front
Backrest covered on outer side
€
Additional charges/reduced prices
specific to range
Transparent material
Armrests with embossed leather pad
Armrests aluminium polished with leather pad
(in combination with frame aluminium polished)
Armrests aluminium bright chrome plated with leather pad
(in combination with frame bright chrome plated)
30
189
250
334
All conference and visitor chairs as well as cantilever chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides;
for wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge). Transparent backrest not available in
combination with back cushion.
49
Upholstery material
54
60
74
62
63
66
67
69
Modus Medium
Cantilever chairs
Standard height backrest
¡ 43 ¶ 91 ¢ 65 | 56
(¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 22")
€
€
€
287/7
With seat cushion,
Backrest with non-transparent material,
Armrests laminated beech
Frame coated
893
923
1201
Additional charges
Frame bright chrome plated
Frame matt chrome plated
Backrest upholstered on the front
Backrest covered on outer side
Armrests with embossed leather pad
Transparent material
30
87
186
74
105
30
30
87
205
87
105
30
30
87
494
233
105
30
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
50
28 range
Modus Executive
Design: Klaus Franck, Werner Sauer and
wiege, Fritz Frenkler, Justus Kolberg
Technical details
Function
Task chairs with luxurious backrest
cushion and automatic synchro-­
adjustment: the seat / backrest angle adjusts automatically to the sitting position of the user. When
leaning back, the backrest tension
increases according to the need for
additional support. Infinitely variable tension adjustment for the user.
Forward position lockable by engaging lever. Gas lift, conforming to
DIN 4550, for infinitely variable adjustment of seat height.
Swivel-mounted ­conference /
­visitor chairs with automatic
­synchro-adjustment and infinitely
variable height adjustment, optionally with rigid, four-arm seat bearer;
alternatively also as a cantilever
­version.
Frame
Backrests
Task chairs
Die-cast aluminium five‑star base,
coated, polished or bright chrome
plated.
Conference / visitor chairs with fourstar base in die-cast aluminium,
coated, polished or bright chrome
plated.
Twin wheel swivel castors in black
polyamide with load-dependent
braking, compliant with
DIN EN 12529, as the standard
­version for carpeted floors, or with
a grey polyurethane soft cover for
hard floors. Anti-static castors on
request.
Glides in black polyamide as the
standard version for carpeted
floors, or in black polyurethane for
hard floors. Die-cast aluminium
swing plates, polished or bright
chrome plated to match the star
base. Sheet steel, black-coated
­synchro technology shell.
Conference and visitor chair model
281/91 with four-arm seat bearer in
die-cast aluminium, polished or
bright chrome plated to match
four-star base.
Task chairs and visitor chairs
Frame in black, glass fibre-rein­
forced polyamide. Exchangeable
frame covering in black polyamide
material, with slim leather-covered
cushion on seat and backrest.
On request, outer side of backrest
frame with cover.
Standard height backrest with a
straight edge. High backrest with
shoulder support with a forward
curvature, with slim, leather-covered cushion.
Cantilever chairs
Frame in round steel tube,
bright chrome plated or matt
chrome plated, with anti-tilt
­stoppers as the stand­ard version
for carpeted floors: with additional
glides for hard floors, optionally
with additional felt insert.
Seat
Seat shell in black, viscoelastic
­polypropylene. Seat upholstery:
one-piece moulded polyurethane
foam with exchangeable cover.
Side facing in embossed leather in
the same colour for leather cover.
Frame versions
Small components
Cantilever chairs
Steel tube frame, bright chrome
plated or matt chrome plated to
match frame. Exchangeable frame
covering in black polyamide material, with slim leather-covered cushion on seat and backrest.
On request, outer side of backrest
frame with leather cover.
Backrest with a straight edge.
Cantilever chairs
Armrest pads covered in the same
colour leather.
Standards
Modus Executive task chairs and
conference chairs / visitor chairs
­conform to the Office Chair Stand­
ard DIN EN 1335, ANSI / BIFMA X
5.1, BS 5459 and other international
office chair standards.
They meet the requirements of category C of the Office Chair Standard DIN EN 1335.
Modus Executive cantilever chairs
conform to DIN EN 16139 - L1 and
ANSI / BIFMA X 5.1.
Armrests
Task chairs
Armrests in black, textured, glass
­fibre-reinforced polyamide, with
additional embossed leather pad in
the same colour leather.
Optionally, with armrests in diecast aluminium, aluminium polished or bright chrome plated with
leather pad and triple-sewn seam
in the same colour leather.
Please note:
The prices for types with cushioning leather provided by the customer are given on request.
Conference / visitor chairs
Armrests in die-cast aluminium,
­aluminium polished or bright
­chrome plated, with leather pad
and triple-sewn seam in the same
colour leather.
Task chair and visitor chair
Star base, swing plates
51
52
Bright chrome plated
Aluminium polished
Cantilever chair
Round steel tube frame
51
58
Bright chrome plated
Matt chrome plated
Castors, glides, frame components, adjustment levers
41
Black
51
Upholstery material
74
87
Modus Executive
Task chairs
Standard height backrest
¡ 42/53 ¶ 91/102 ¢ 68 | 65
(¡ 16½"/20⅞" ¶ 35⅞"/40⅛" ¢ 26¾" | 25⅝")
283/81
Seat and backrest with slim, leather-covered cushion,
Armrests polyamide with embossed leather pad,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium polished
Additional charge
Backrest covered on outer side
High backrest
¡ 42/53 ¶ 112/123 ¢ 68 | 65
(¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")
284/81
Seat and backrest with slim, leather-covered cushion,
Armrests polyamide with embossed leather pad,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control
Frame aluminium polished
Additional charge
Backrest covered on outer side
€
€
2819
2988
233
297
3511
3724
233
297
€
Additional charges/reduced prices
specific to range
Frame aluminium bright chrome plated
Armrests aluminium polished with leather pad
(in combination with frame aluminium polished)
Armrests aluminium bright chrome plated with leather pad
(in combination with frame bright chrome plated)
Anti-static castors
All task chairs are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional
charge). Additional charge for anti-static castors.
52
75
62
152
40
Upholstery material
74
87
Modus Executive
Conference/visitor chairs
Standard height backrest
¡ 45 ¶ 95 ¢ 61 | 59
(¡ 17¾" ¶ 37⅜" ¢ 24" | 23¼")
281/91
Swivel-mounted, with rigid seat bearer,
Seat and backrest with slim, leather-covered cushion
Armrests aluminium polished with leather pad,
Frame aluminium polished
Additional charges
Armrests bright chrome plated with leather pad,
Frame aluminium bright chrome plated
Backrest covered on outer side
Standard height backrest
¡ 45/56 ¶ 95/106 ¢ 61 | 59
(¡ 17¾"/22" ¶ 37⅜"/41¾" ¢ 24" | 23¼")
281/93
Swivel-mounted,
Seat and backrest with slim, leather-covered cushion,
Automatic synchro-adjustment, tension control,
Infinitely variable height adjustment
Armrests aluminium polished with leather pad,
Frame aluminium polished
Additional charges
Armrests bright chrome plated with leather pad,
Frame aluminium bright chrome plated
Backrest covered on outer side
€
€
2450
2620
252
233
252
297
2878
3048
168
233
168
297
All conference and visitor chairs are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify soft glides; for wooden floors (e.g.
parquet), please specify additional felt insert when ordering (both with no additional charge).
53
Upholstery material
74
87
Modus Executive
Cantilever chairs
Standard height backrest
¡ 43 ¶ 91 ¢ 65 | 61
(¡ 16⅞" ¶ 35⅞" ¢ 25⅝" | 24")
287/81
Seat and backrest with slim, leather-covered cushion,
Armrests leather-covered
Frame bright chrome plated
Additional charges
Frame matt chrome plated
Backrest covered on outer side
€
€
2230
2399
87
233
87
297
All cantilever chairs are fitted with anti-tilt stoppers as the standard version for soft floors (e.g. carpet). For hard floors (e.g. stone), please specify felt insert; for
wooden floors (e.g. parquet), please specify additional felt insert when ordering (both with no additional charge).
54
290 range
Sola
Design: Justus Kolberg
Licensor for products and sales: Davis Furniture, NC, US
Technical details
Function
The conference chair fuses innovative comfort with crisp design and a
classy appeal. The chair’s defined
by the linear shape of the seat shell
and the linear aluminium frame
which branches out from the centre column into a V-shaped support
that culminates in the armrests. The
slender seat shell is swivel-mounted
at the front and connected with a
V-shaped support by two pressure
springs at the back. As a result, the
chair rocks backwards and forwards comfortably without any extra mechanical parts required. The
sprung pressure can easily be adjusted to suit personal levels of
comfort and body weight. DIN
1335-1 compliant gas lift for infinite
adjustment of the seat height.
Areas used: Traditional conference
and meeting rooms, executive
­offices and boards, high-quality
restaurants or prestigious dining areas.
Frame
Die-cast aluminium five-star base,
high-lustre polished and coated
matt black or silver satin. Round,
black, polyamide multi-purpose
glides for all types of flooring. For
wooding floorings (e.g. parquet)
please order with extra felt. Optionally with castors. Twin wheel
swivel castors with load-dependent
braking, made of black polyamide
compliant with DIN EN 12529 as
the standard version for carpets;
with grey soft polyurethane facing
for hard floors. These castors
change the seating height and adjustment range to 45 – 51 cm. The
gas lift is covered by bright chromeplated protective tube, coated matt
black or in a silver satin finish.
When the star base is aluminium
high-lustre polished, the protective
tube is bright chrome-plated. Vshaped die-cast aluminium support, high-lustre polished like the
star base, coated matt black or in
silver satin. Lever for adjusting the
seating height, coated matt black
or in silver satin. When the star base
is aluminium high-lustre polished,
the lever is bright chrome-plated.
Frame versions
60
72
80
Seat and back
Unitary seat and back shell made of
moulded plywood and covered on
the rear. Liner made of padded cut
foam. Management grade upholstery also with facing all the way
round and with quilted stitching.
Standards
The Sola conference chair complies
with DIN EN 16139-L1 and ANSI BIFMA X 5.1 Testing is currently ­being
carried out to obtain the GS mark.
Armrests
Die-cast aluminium armrests the
same as the shell, optionally with
additional plastic armrest pad.
Chairs with management grade upholstery also come with optional
leather-covered armrest pads
which are only available in the
same colour and in combination
with leather 87.
Star base, V‑shaped support, armrests
Protective tube, lever for gas lift
Coated, silver satin finish
Aluminium high-lustre polished
Black matt coating
Coated, silver satin finish
Bright chrome plated
Black matt coating
55
Sola
Conference chair
60
62
67
69
€
Medium-height backrest
¡ 44/53 ¶ 101/110 ¢ 67 | 68
(¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")
291/7
One-piece seat and back shell, fully upholstered,
With armrests,
Infinitely variable height adjustment
Frame aluminium coated
Additional charge
Plastic armrest pad
Medium-height backrest
¡ 44/53 ¶ 101/110 ¢ 67 | 68
(¡ 17⅜"/20⅞" ¶ 39¾"/43¼" ¢ 26⅜" | 26¾")
€
€
€
1302
1302
1589
€
42
291/71
Seat and back with management grade upholstery,
With armrests,
Infinitely variable height adjustment
Frame aluminium coated
Additional charges
Plastic armrest pad
Leather-covered armrest pad
Upholstery material
63
74
87
66
1398
42
1717
2066
116
€
Additional charges/reduced prices
specific to range
56
Frame aluminium high-lustre polished
Castors
42
40
30 range
Graph
Design: jehs + laub
Technical details
Function
Formal and distinctive, high-end
conference chair in two backrest
heights. Armrests stylishly link the
seat and backrest. A high level of
sprung (and at the sides also elastic)
comfort due to three-point support
with rear spring strut and sophisticated upholstery. Can be used in
traditional conference and meeting
rooms, executive offices and
boards, high-quality restaurants or
prestigious dining areas.
Frame
Four-star base in die-cast aluminium, coated black or signal white,
polished or bright chrome plated.
Black, multi-purpose glides made
of plastic for all types of flooring.
Optionally with base glides with
larger contact area for sensitive
floorings, either to match the star
base coated black or signal white ,
matt chrome-plated (matt polished
star base) or bright chrome plated
(bright chrome-plated star base).
Black polyamide glides for carpets.
For hard floors (e.g. stone), please
order with soft TPU, for wooden
floors (e.g. parquet) with additional
felt. These glides change the seating height to 44 cm.
Optionally with castors for 4-star
bases compliant with DIN EN 1335
and ANSI BIFMA X 5.1 for conference chairs. Load-dependent braking, twin wheel swivel castors
made of black polyamide compliant with DIN EN 12529, with black
polyurethane coating for both hard
and soft floors. Castors with black
plastic shell, either with chrome
plated ring (coated star base), matt
chrome plated ring (star base matt
polished) or chrome plated ring
(star base bright chrome plated).
These glides change the seating
height to 45 cm.
Swivel-mounted columns with diecast aluminium Y-shaped seat support, coated black or signal white,
matt polished or bright chrome
plated to match the star base.
Permanently elastic, rubber/metal
connecting elements. Sprung elastic strut made of top-quality spring
steel in black.
Seat and back
Seat and back frame made of metal, with wave springs, additional
cushioning and fully padded with
polyurethane.
Frame versions
49
51
53
79
Small components
Castors
49, 53 black plastic shell with chrome plated ring
52
51
Armrests
Armrests that connect the seat and
back made of die-cast aluminium
and to match the frame black or
white coated, matt polished or
bright chrome plated.
Standards
The Graph chairs comply with the
DIN EN 13761, DIN EN 1728 and
ANSI/BIFMA X 5.1 standards.
Please note
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Coated signal white
bright chrome plated aluminium
Coated black
Matt polished aluminium
black plastic shell with matt chrome plated ring
black plastic shell with chrome plated ring
Base glide
colour matched black or white
coated
Matt chrome plated
Bright chrome plated
57
Upholstery material
60
74
87
63
66
67
Graph
Conference chair
Medium-height backrest
¡ 43 ¶ 102 ¢ 62 | 64
(¡ 16⅞" ¶ 40⅛" ¢ 24⅜" | 25¼")
High backrest
¡ 43 ¶ 125 ¢ 62 | 64
(¡ 16⅞" ¶ 49¼" ¢ 24⅜" | 25¼")
€
€
€
301/5
Swivel-mounted,
one-piece seat and back frame, fully upholstered,
With armrests
Frame aluminium coated
1813
2153
2451
302/5
Swivel-mounted,
one-piece seat and back frame, fully upholstered,
With armrests
Frame aluminium coated
2145
2594
2947
€
Additional charges/reduced prices
specific to range
58
Swivel-return mechanism
Matt polished aluminium frame
Frame aluminium bright chrome plated
Base glide
Castors
105
95
419
46
76
300 range
Graph
Design: jehs + laub
Technical details
Function
A high-quality table system for traditional conference and executive
workspaces.
Table tops
Medium density fibreboard (MDF)
or panel made of single-pane reinforced glass.
Frame
Table legs made of bright chromeplated aluminium, matt polished
chrome, or coated in black, or signal
white. Table crossbeams/underframes made of aluminium-extruded profile, colour matched with the
table legs (exception: model
300/50, reinforcement underframes on the inside always black).
Table top bearers to connect the table top made of black-coated steel,
except when the frame is coated
white the table top bearer is coated
white. Adjustable table glides (10
mm) made of steel, glide cover
made of die-cast zinc, surface the
same as the frame, with glide insert
made of polyamide for soft floorings and polyurethane for hard
floorings or with felt insert.
Table top group 2 – veneer
Table top thickness 26 mm
Variation 1:
Veneers made of beech, oak or ash
according to Wilkhahn woodstain
colour samples with colourmatched and symmetrically curved
table edge, protected with colourless natural wood varnish.
Variation 2:
Veneers made of oak, walnut or
elm, as well as Wilkhahn mocca veneer with colour-matched or symmetrically curved table edge, protected with colourless natural
wood varnish.
Table top group 6 – varnished
Table top thickness 25 mm
Table top 25 mm thick, white or
black varnish-coated, with colourmatched and symmetrically curved
table edge.
Table top group 11 – glass
Table top 29 mm thick, consisting
of MDF core panel (19 mm) with
chamfered edge and single-pane
reinforced glass (10 mm) optionally
coated opaque black or white on
the bottom. MDF core panel the
same colour as the glass panel.
Accessories
Cable channel
Cable channel made of aluminium
extruded profile, retractable, coated black.
Standards
The Graph tables comply with
the DIN EN DIN EN 527 and
ANSI / BIFMA X 5.5 standards.
Opening lengthways
or crossways
Portal opening lengthways,
­bevelled on both of the long sides
(can be used on both sides), gas-lift
damped automatic opening
­mechanism, portal in the same
­colour and material as the surface
of the table. Single table portal:
300 x 165 mm (11¾" x 6½")
Portal opening sideways, bevelled
on one long side (can be used from
one side), gas-lift damped automatic opening mechanism, portal
in the same colour and material
as the surface of the table.
Single table portal: 300 x 165 mm
(11¾" x 6½")
Single portal basic
Aluminium installation frame with
portal and brushed profile. Single
table portal: 280 x 120 mm
Vertical cable management
Flexible black cable sheath. Length
including table attachment and
floor panel approx. 75 cm.
Edge profiles
symmetrically curved
(table top group 2 and 6)
Table top group 11
Frame versions
Legs, crossbeams, underframes
Table top bearers
49
Coated signal white
Coated signal white
51
bright chrome plated aluminium
Coated black
53
Coated black
Coated black
76
Chrome, matt-polished
Coated black
€
Accessories
Socket strip with insertion platesand strain anchor*, with 4 modules,
3 x power supply modules, 1 x data module
300/04 Socket strip with insertion plates and strain anchor*, with 4 modules,
2 x power supply modules, 1 x data module,1 x HDMI connector
300/051 Vertical cable management
300/06 Strain anchor for cable channel with insertion plate* (2 items)
300/03
286
601
154
41
* incl. fastening material
59
Additional charges
Cable channel
300/01 1 single table portal opening lengthways
300/05 1 single table portal basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
300/00
130 x 280, H 73 (51⅛" x 110¼", H 28¾")
for 8 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
Additional charges
Cable channel
300/01 2 single table portals opening lengthways
300/05 2 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
Glass
300/00
120 x 240, H 73 (47¼" x 94½", H 28¾")
for 6 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
Table top group
2
11
Veneer variation 2
Additional charges
Cable channel
300/01 1 single table portal opening lengthways
300/05 1 single table portal basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
2
Veneer variation 1
300/00
120 x 200, H 73 (47¼" x 78¾", H 28¾")
for 6 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
6
varnished
Graph
Tables
€
€
€
€
3617
4622
4925
3749
4754
5057
3844
4849
5152
4258
5263
5566
411
1049
124
411
1107
124
411
1196
124
–
–
–
3731
4771
5111
3878
4918
5258
3991
5031
5371
4884
5924
6264
424
1049
124
424
1107
124
424
1196
124
–
–
–
4094
5237
5659
4256
5399
5821
4398
5541
5963
5195
6338
6760
489
2098
248
489
2214
248
489
2392
248
–
–
–
– not available
When ordering state the national standard.
60
Additional charges
Cable channel
300/01 4 single table portals opening lengthways
300/05 4 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
Glass
300/10
150 x 540, H 73 (59" x 212⅝", H 28¾")
for 14 persons,
consisting of 2 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
Table top group
2
11
Veneer variation 2
Additional charges
Cable channel
300/01 2 single table portals opening lengthways
300/05 2 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
2
Veneer variation 1
300/10
150 x 380, H 73 (59" x 149⅝", H 28¾")
for 10 persons,
consisting of 2 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
6
varnished
Graph
Tables
€
€
€
€
6554
8274
8885
6809
8529
9140
7050
8770
9381
8172
9892
10503
898
2098
248
898
2214
248
898
2392
248
–
–
–
7699
8036
9689 10026
10509 10846
8377
10367
11187
9398
11388
12208
1033
4784
496
–
–
–
1033
4196
496
1033
4428
496
– not available
When ordering state the national standard.
61
Glass
Table top group
2
11
Veneer variation 2
Additional charges
Cable channel
300/02 8 singletable portals opening sideways
300/05 8 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
2
Veneer variation 1
300/20
230 x 540, H 73 (90½" x 212⅝", H 28¾")
for 16 persons,
consisting of 4 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
6
varnished
Graph
Tables
€
€
€
€
12002
14535
15517
12441
14974
15956
12959
15492
16474
15938
18471
19453
3551
8544
992
3551
9008
992
3551
9728
992
–
–
–
– not available
When ordering state the national standard.
62
Glass
Table top group
2
11
Veneer variation 2
2
Veneer variation 1
6
varnished
Graph
Tables
€
€
€
€
300/30
Ø 125, H 73 (Ø 49¼", H 28¾")
for 4 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
3092
4022
4267
3234
4164
4409
3295
4225
4470
3398
4328
4573
300/30
Ø 150, H 73 (Ø 59", H 28¾")
for 4 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
3344
4319
4612
3517
4492
4785
3605
4580
4873
3964
4939
5232
300/40
Ø 210, H 73 (Ø 82⅝", H 28¾")
for 8 persons,
consisting of 2 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
5038
6089
6342
5247
6298
6551
5398
6449
6702
6299
7350
7603
1374
2136
248
1374
2252
248
1374
2432
248
–
–
–
8364
9595
10047
8729
9960
10412
9070
10301
10753
11493
12724
13176
2659
4272
496
2659
4504
496
2659
4864
496
–
–
–
Additional charges
Cable channel
300/02 2 singletable portals opening sideways
300/05 2 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
300/50
Ø 300, H 73 (Ø 118⅛", H 28¾")
for 12 persons,
consisting of 4 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
Additional charges
Cable channel
300/02 4 singletable portals opening sideways
300/05 4 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
– not available
When ordering state the national standard.
63
Glass
Table top group
2
11
Veneer variation 2
2
Veneer variation 1
6
varnished
Graph
Tables
€
€
€
€
300/30
120 x 120, H 73 (47¼" x 47¼", H 28¾")
for 4 persons
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
3230
4189
4461
3341
4300
4572
3399
4358
4630
3429
4388
4660
300/40
190 x 190, H 73 (47¾" x 47¾", H 28¾")
for 8 persons,
consisting of 2 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
4987
6051
6405
5182
6246
6600
5335
6399
6753
5861
6925
7279
1414
2136
248
1414
2252
248
1414
2432
248
–
–
–
8698
10037
10629
8970
10309
10901
9299
10638
11230
13747
15086
15678
2818
4272
496
2818
4504
496
2818
4864
496
–
–
–
Additional charges
Cable channel
300/02 2 singletable portals opening sideways
300/05 2 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
300/50
280 x 280, H 73 (110¼" x 110¼", H 28¾")
for 12 persons,
consisting of 4 segments
Frame coated
Frame aluminium bright chrome plated
Frame with chrome matt-polished finish
Additional charges
Cable channel
300/02 4 singletable portals opening sideways
300/05 4 single table portals basic
*Socket strip, strain anchor, vertical cable management,
see accessories on page 59
– not available
When ordering state the national standard.
64
340 range
Chassis
Design: Stefan Diez
Technical details
Function
Four-legged, lightweight multipurpose chair for conference
rooms, informal meeting areas, cafeterias, showrooms, lobbies, hotels
or dining rooms.
Frame
Frame made of three-dimensional,
deep-drawn, extremely strong
sheet steel, coated in graphite
black, cement grey, grey-white, signal white, flame red, brown-green.
Black, multi-purpose glides made
of plastic for all types of flooring.
Seat and back
Unitary seat and backrest shell
made of finely grained plastic
(model 341/1), or with textile cover
(model 341/5), or fully upholstered
with cut foam, leather covered,
shell covered with leather at the
rear (model 341/6).
Standards
The Chassis multi-purpose chairs
comply with the DIN EN 13761
standard.
Model 341/7 (outdoor design) with
extra coating to protect from corrosion. Only in conjunction with a
black coated frame and black seat
shell.
Only the combinations listed in the following matrix are possible.
Frame colour
RAL 9011
Graphite black
Seat and back shell
Polyamide
Black
RAL 7023
Cement grey
RAL 9002
Grey-white

Grey

White

Frame colour
Seat and back shell
Textile cover
RAL 9011
Graphite black
RAL 7023
Cement grey

Anthracite
C1 / 10

Grey-black
C1 / 11

Forest brown
C1 / 12
Beige-grey
C1 / 13
Red
C1 / 14
Grey-beige
C2 / 20


Grey-black
C2 / 21


Black
C2 / 22

Red-beige
C2 / 23
Olive-beige
C2 / 24
Sand
C3 / 30
Black-grey
C3 / 31
Light grey
C3 / 32
Graphite
C3 / 33
Ruby red
C3 / 34
RAL 9002
Grey-white
RAL 9003
Signal white
RAL 3000
Flame red
RAL 6008
Brown-green

























65
Upholstery material
Chassis
Multi-purpose chair
€
Multi-purpose chair
¡ 42 ¶ 77 ¢ 54 | 58
(¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/1
Stackable 4‑high free-standing
Frame coated
Multi-purpose chair
¡ 42 ¶ 77 ¢ 54 | 58
(¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/5
with textile cover
Not stackable
Frame coated
Multi-purpose chair
¡ 42 ¶ 77 ¢ 54 | 58
(¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
341/6
leather-covered
fully upholstered,
Not stackable
Frame coated
Outdoor multi-purpose chair
¡ 42 ¶ 77 ¢ 54 | 58
(¡ 16½" ¶ 30⅜" ¢ 21¼" | 22⅞")
66
341/7
Stackable 4‑high free-standing
Frame coated
C1
C2
C3
74
€
€
€
383
391
273
549
329
361 range
Ceno
Design: Läufer + Keichel
Technical details
Function
Four-legged, stackable upholstered
chair for furnishing conference
rooms as well as high-quality restaurant and cafeteria environments.
Frame
Frame in solid aluminium, bright
chrome plated or coated in silver
with a satin finish or black. Black,
multi-purpose plastic glides for all
types of flooring.
Frame versions
51
53
60
Seat and back
Seat frame in die-cast aluminium,
bright chrome plated or coated in
silver with a satin finish or black.
­Resilient back shell in moulded
­polyurethane foam around a polypropylene core, reinforced with
two hexagonal rods connecting the
seat and back. Seat cushion in
moulded foam; seat pan in black
through-dyed plastic. Back and seat
cushion ­exchangeable, also the unitary, ­upholstery covers. Two-part,
­exchangeable cover.
Armrests
Armrests in black polyamide.
Frame
Seat frame
Bright chrome plated
Coated black
Coated, silver satin finish
Bright chrome plated
Coated black
Coated, silver satin finish
Standards
Ceno conference chairs:
DIN EN 13761, DIN EN 1022 and
ANSI/BIFMA X 5.1
Accessories
Optional stainless steel inline
­connector.
Optionally model 361, short inline
connector for linking chairs without
armrests and chairs with armrests
alternately with chairs without
­armrests or model 362 long inline
connector for linking chairs with
armrests.
€
Accessories
360 Two-wheeled cart for 8 stackable upholstered chairs
361 Inline connector short for linking chairs without armrests and chairs with armrests alternately with
chairs without armrests
362 Inline connector long for linking chairs with armrests
363 Seat numbers magnetic seat numbers 1 set (10 consecutive numbers)
546
35
38
25
67
Ceno
Conference chairs
47
54
Upholstery material
60
74
87
63
66
67
€
€
€
€
€
Conference chair
¡ 47 ¶ 80 ¢ 52 | 54
(¡ 18½" ¶ 31½" ¢ 20½" | 21¼")
361/5
With seat and back cushion,
Stackable 8‑high free-standing
Frame aluminium coated
471
508
539
693
802
Conference chair
¡ 47 ¶ 80 ¢ 58 | 54
(¡ 18½" ¶ 31½" ¢ 22⅞" | 21¼")
361/6
Armrests polyamide
With seat and back cushion
Frame aluminium coated
579
616
647
801
910
€
Additional charges/reduced prices
specific to range
Black multi-purpose plastic glides for all types of flooring.
68
Frame aluminium bright chrome plated
54
440 range
Confair
Design: wiege, Fritz Frenkler,
Justus Kolberg
Technical details
Function
Mobile, modular furniture range
for multi-functional communication environments with dynamic,
self-­organized teamwork.
Mobile desk
Server
Frame
Polished die-cast aluminium base.
Black polyamide castors and glides.
Oval aluminium profile column,
clear anodized or coated in black
or silver satin finish.
Frame
Die-cast aluminium base, polished
or coated in black or ­silver satin finish, with four twin wheel swivel
castors in black polyamide. Aluminium profile column and cable management cover, clear anodized or
coated in the same colour as the
base.
Black polypropylene handle.
Writing tablet
Birch plywood, fixed to column
with tilt / fold function. Back and
front edge of desk top finished
with a raised, black polypropylene
lipping.
Finishes
Desk top group 1 – laminate
Top thickness 11 mm (⅜")
Laminate according to ­Wilkhahn
colour and surface finish samples.
Edging, natural oiled finish.
Desk top group 2 – veneer
Top thickness 11 mm (⅜")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour
­samples.
Variation 2:
Maple, elm or walnut veneer,
as well as ­Wilkhahn veneer Mocca
according to ­Wilkhahn woodstain
colour ­samples.
Top shelf and box brackets
Die-cast aluminium, coated black.
Top shelf
One-piece sheet steel with black
textured coating.
Box
Base: one-piece sheet steel with
black textured coating.
Birch plywood body and front.
Box with drawer
Birch plywood body and front.
Base: one-piece sheet steel with
black textured coating.
Solid beech drawer with natural
­finish, on steel runners.
Internal measurements of drawer
37 x 37 cm (145/8" x 145/8").
Lid in one-piece sheet steel with
black textured coating.
Veneer version
As a standard, veneers are
­processed by slip-match method
onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Body group 1 – laminate
Top thickness 12 mm (½")
Laminate according to ­Wilkhahn
colour and surface finish samples.
Lipping, n
­ atural oiled finish.
Body group 2 – veneer
Top thickness 12 mm (½")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour
­samples.
Variation 2:
Maple, elm or walnut veneer,
as well as ­Wilkhahn veneer Mocca
­according to ­Wilkhahn woodstain
colour ­samples.
Veneer version
As a standard, veneers are
­slip-matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Please note:
Maximum load capacity with even
weight distribution: 60 kg in total
for server, 20 kg each for top
shelves, boxes, and 20 kg for box
with drawer – max. 6 kg inside
drawer.
Accessories
Four-wheeled trolley
€
Accessories
441 Four-wheeled trolley for six mobile desks model 441/1
443 Four-wheeled trolley for six pinboards model 443/1 or six whiteboards
model 443/3
538
783
69
Lectern
Pinboard / Whiteboard
Flipchart
Frame
Similar to server, but with two twin
wheel swivel castors and two glides
in black polyamide.
Stand
Feet in polished die-cast aluminium. Glides in black polyamide.
Frame optionally with four lockable
black castors.
Frame
Model 442/1
Foldable, three-legged easel in
­aluminium profile, bright chrome
plated, clear anodized or coated
­in black or silver satin finish. Hinges
and glides in black polyamide.
Frame optionally with three castors
in black, rear castor lockable
(with this ­version, the frame is not
foldable).
Writing panel made of MDF (Medium-Density Fibreboard) directly
coated with melamine resin. Thickness 13 mm (½"), surfaced with
laminate (colour 24/89), height-adjustable in three positions; removable. Two pins to hold standard flipchart paper; with black polyamide
paper holder. ­Aluminium profile
pentray, clear ­anodized or coated in
the same ­colour as the frame.
Lectern top
Birch plywood, front finished with
raised, black polypropylene lipping.
Surfaces
Group 1 – laminate
Top thickness 11 mm (⅜")
Laminate according to ­Wilkhahn
colour and surface finish samples.
Lipping, natural oiled finish.
Group 2 – veneer
Top thickness 11 mm (⅜")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour
­samples.
Variation 2:
Maple, walnut or elm ­veneer,
as well as ­Wilkhahn veneer Mocca
­according to ­Wilkhahn woodstain
colour ­samples.
Veneer version
As a standard, veneers are
­slip-matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
­beech ­veneer.
Some specific growth features
­possible.
Front panel
Perforated steel in black or silver
satin finish.
Unperforated upper edge for
­com­pany logos max. 115 x 426 mm
(4½" x 16¾").
Accessories
Additional shelf, width 45 cm
(17¾"), depth 35 cm (13¾").
70
Frame
Aluminium profile sides and braces,
clear anodized or coated in silver
satin finish or black.
Board cover pinboard
Double-sided, grey felt covering.
With anthracite polyether foam
­pinstrip.
Board cover whiteboard
One side covered in grey felt, one
side in white enamelled sheet steel,
suitable for magnets, can be dry
wiped and used as a projection
screen.
Accessories
Four-wheeled trolley
Whiteboard starter kit
Additional charge
Foot aluminium polished,
Column aluminium clear anodized
Flipchart
¶ 180/200 ¢ 75 | 67
(¶ 70⅞"/78¾" ¢ 29½" | 26⅜")
Pinboard/whiteboard
¶ 190 ¢ 125 | 54
(¶ 74¾" ¢ 49¼" | 21¼")
442/1
Foldable,
Writing surface, height adjustable
Legs and pentray aluminium coated
Veneer variation 2
441/1
Stackable
Foot aluminium polished, column aluminium coated
Veneer variation 1
€
Mobile desk
¶ 73 ¢ 48 | 45
(¶ 28¾" ¢ 18⅞" | 17¾")
Laminate
Body group/Table top group
1
2
2
Confair
Mobile desk, Flipchart, Pinboard/whiteboard
€
€
€
419
454
499
13
13
13
618
Additional charges
Legs and pentray aluminium clear anodized
Legs aluminium bright chrome plated,
Pentray aluminium, clear anodized
Mobile version on castors (frame not foldable)
93
201
443/1 Pinboard, stackable,
Both sides covered in grey felt,
With pinstrip model 449
Foot sections aluminium polished,
Frame aluminium coated
611
Additional charges
Foot sections aluminium polished,
Frame aluminium clear anodized
Version with castors
33
126
443/3 Whiteboard, stackable,
One side covered in grey felt,
One side in white enamelled sheet steel, suitable for magnets,
For use with dry-wipe markers,
Suitable as projection surface,
With pinstrip model 449
Foot sections aluminium polished,
Frame aluminium coated
844
Additional charges
Foot sections aluminium polished,
Frame aluminium clear anodized
Version with castors
33
126
34
449 Pinstrip
For pinboard model 443/1 and whiteboard 443/3
17
451 Starter kit
For whiteboard model 443/3 comprising:
10 Magnets Ø 30 mm (1⅛") (2 colours),
4 dry-wipe board markers (4 colours),
1 Magnetic pen holder,
1 Magnetic board eraser,
10 Sheets erasing paper,
1 Bottle of board cleaning fluid
93
71
Additional charge
Base aluminium polished, column aluminium clear anodized
Veneer variation 2
448/9
With modesty panel, coated
Base and column aluminium coated
Veneer variation 1
€
Lectern
¶ 106/115 ¢ 46 | 51
(¶ 41¾"/45¼" ¢ 18⅛" | 20⅛")
Laminate
Body group/Table top group
1
2
2
Confair
Lectern, Server catering/interactive conference
€
€
€
1516
1549
1582
61
61
61
276
289
322
1765
1864
1996
61
61
61
448 Shelf
For lectern model 448/9,
width 45 (17¾"),
depth 35 (13¾")
Server catering/interactive conference
¶ 107 ¢ 46 | 59
(¶ 42⅛" ¢ 18⅛" | 23¼")
446/3
1 Box with drawer,
2 Open-top boxes
Base and column aluminium coated
Additional charge
Base aluminium polished, column aluminium clear anodized
Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg
for box with drawer, max. 6 kg inside drawer.
72
Confair
System components: servers
445/00
Height 96 (37¾")
Base and column aluminium coated
446/00
Height 107 (42⅛")
Base and column aluminium coated
Additional charge
Base aluminium polished, column aluminium clear anodized
Veneer variation 1
Veneer variation 2
€
Server frame
Body group
2
2
Laminate
1
€
€
€
490
538
61
Shelf
447/01
45 x 45 (17¾" x 17¾")
230
Shelf
447/02
45 x 91 (17¾" x 35⅞")
292
Box
447/04
Open, 45 x 45 x 10
(17¾" x 17¾" x 3⅞")
308
341
385
Box with drawer
447/07
45 x 45 x 11
(17¾" x 17¾" x 4⅜")
611
644
688
Please note: Maximum load capacity with even weight distribution: 60 kg in total for server; 20 kg each for top shelves, boxes and cable management box; 20 kg
for box with drawer, max. 6 kg inside drawer.
73
440 range
Confair folding table
Design: Andreas Störiko
Technical details
Function
Moveable, collapsible and linkable
­table range for flexible, dynamic
use of conference and communication areas. Just one single step is
required to open out or collapse up
to three metre long, barrel-shaped
or rectangular tables. The tables
can also be linked to form conference systems using table-table connectors. Large-sized wheels allow
the tables to be transported in
buildings and come complete with
a locking brake. As a result, minimum cost and effort is required to
manage conference spaces. Ideal
for multi-purpose ­conference interiors in high quality design. Alternatively as a wild card in combination
with the Logon table range for conference spaces with a variety of
partition options, or with Timetable
for sophisticated training and seminar spaces.
Frame
Die-cast aluminium, bright chromeplated, polished foot section or
coated in silver satin finish or black.
Aluminium profile uprights and underframe, clear anodised or coated
in the same colours as the foot sections. The bright chrome-plated
foot sections are coated black.
­Upright optionally available bright
chrome plated. Connecting bar und
T-shaped joint coated like the uprights and underframes, with clear
anodised uprights and underframes coated in silver satin finish.
­Connecting rod and T-shaped joint
­optionally bright chrome-plated.
Lockable, black polyamide castors.
Table top group 1 – laminate
Thickness 26 mm (1”)
Laminate according to ­Wilkhahn
colour and surface finish samples
with laminated beech lipping,
­natural oiled finish.
Table top group 2 – veneer
Thickness 26 mm (1”)
Variation 1:
Beech veneer according to
­Wilkhahn woodstain colour samples with laminated beech lipping
or oak, or ash veneer according
to ­Wilkhahn woodstain colour samples with lipping, as far as possible
in the same colour as the veneer.
Variation 2:
Maple, elm or walnut veneer,
as well as ­Wilkhahn veneer Mocca
­according to ­Wilkhahn woodstain
colour samples with ­lipping, as far
as possible in the same colour as
the veneer.
Veneer types
As a standard, veneers are
­slip-matched method onto the
­table top.
The surfaces are sealed with clear
lacquer: Open-pore: oak, ash,
­walnut and elm veneer, as well
as ­Wilkhahn Mocca veneer.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Table top group 3 – linoleum
Table top thickness 27 mm (1⅛").
Linoleum according to ­Wilkhahn
­linoleum colour samples, laminated
beech lipping, natural oiled finish.
Accessories
Single table portal
Hinged cover in the same colour
and material as the table top surface with brush strip for cable exit.
Aperture with real wood lipping, as
far as possible in the same colour as
the table top.
Hinge allows 180° opening angle.
Single table portal:
350 x 150 mm (13¾" x 5⅞") or
300 x 150 mm (11¾" x 5⅞").
Linoleum on request.
Further surfaces for the formats
shown in the price list are ­available
on request.
Standards
The Confair folding tables comply
with ANSI / BIFMA X 5.5.
When placing repeat orders,
­please indicate whether your
­table tops have slip­-matched
or book-matched veneer.
Edge profiles
Standard version:
Bullnose double with integral, impact-resilient profile
Alternatively:
Straight with integral, impact-resilient profile
Frame versions
51
52
53
60
74
Foot section
Upright
Connecting bar
Top bearer and underframe
Bright chrome plated
Aluminium polished
Coated black
Coated, silver satin finish
Black coated or bright chrome plated
Clear anodized
Coated black
Coated, silver satin finish
Black coated or bright chrome plated
Coated, silver satin finish
Coated black
Coated, silver satin finish
Coated black
Clear anodized
Coated black
Coated, silver satin finish
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Table-table-connectors model 613, metal (2 items)
Set price single table portal 300 x 150 mm with cable basket 1
Set price single table portal 300 x 120 mm with cable basket 1
Set price single table portal 300 x 150 mm with storage net 1
Set price single table portal 300 x 120 mm with storage net 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable
cover, cable clips. 2
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, storage net,
cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable clips. 2
2
€
€
€
4814
5239
5882
5510
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
566
•
•
•
•
96
432
•
938
•
1014
•
•
1148
•
1226
•
•
1148
•
1226
•
•
–
•
–
•
107
•
•
•
•
335
104
•
•
•
•
•
•
•
•
440/00
With cross veneer,
e.g. 110 x 260, H 73 (43¼" x 102⅜", H 28¾"),
Folded depth 110 (43¼"),
width 56 (22"), height 160 (63")
Aluminium coated foot sections, uprights and underframes, coated connecting bar
Additional charges/reduced prices specific to range
Polished aluminium feet, aluminium clear anodised upright and underframes, silver
satin coated connecting bar
Bright chrome plated aluminium feet, aluminium black coated upright and frames,
black coated connecting bar
Bright chrome plated aluminium feet and upright, aluminium black coated
underframes, black coated connecting bar
Bright chrome plated aluminium feet and upright, aluminium black coated
underframes, bright chrome plated connecting bar
2
€
€
Rectangular
1
Laminate
Confair
Folding tables
354
Depth
Length
90
(35⅜")
100
(39⅜")
105
(41⅜")
110
(43¼")
120
(47¼")
180(70⅞")
200(78¾")
210(82⅝")
220(86⅝")
240(94½")
260(102⅜")
280(110¼")
300(118⅛")
4415
4464
4489
4514
4563
4612
4662
4711
5299
4533
5386
5417
4623
4650
4741
4770
5387
5420
4615
5481
5509
5581
5701
–
5461
5477
5502
4696
4785
4814
4934
–
4736
5658
5675
5744
4948
4979
–
–
180(70⅞")
200(78¾")
210(82⅝")
220(86⅝")
240(94½")
260(102⅜")
280(110¼")
300(118⅛")
4682
4755
4793
4830
4903
4979
5051
5126
5618
4860
5775
5809
4994
5039
5171
5215
5735
5816
4958
5898
5930
6094
6280
–
5812
5885
5915
5054
5195
5239
5424
–
5059
6073
6107
6184
5397
5441
–
–
180(70⅞")
200(78¾")
210(82⅝")
220(86⅝")
240(94½")
260(102⅜")
280(110¼")
300(118⅛")
5113
5222
5276
5331
5440
5548
5657
5765
6136
5375
6408
6450
5570
5635
5829
5896
6301
6438
5491
6566
6625
6790
7154
–
6400
6515
6556
5608
5745
5882
6156
–
5554
6745
6816
6944
6057
6129
–
–
180(70⅞")
200(78¾")
210(82⅝")
220(86⅝")
240(94½")
260(102⅜")
280(110¼")
300(118⅛")
4853
4942
4988
5033
5122
5212
5302
5392
5824
5068
6020
6075
5230
5283
5445
5499
5956
6064
5176
6188
6236
6400
6626
–
6041
6152
5915
5283
5450
5510
5737
–
5262
6366
6418
6497
5678
5737
–
–
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
1 For details see page 79. 2 The relevant ITS must be ordered separately (see page 78).
75
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm with storage net Set price single table portal 300 x 120 mm with storage net 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, storage net, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
clips. 2
2
€
€
€
4814
5239
5882
5510
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
566
•
•
•
•
432
1014
•
1226
•
1226
•
•
335
•
•
•
•
104
•
•
•
•
440/2
With cross veneer,
e.g. 90/110 x 260, H 73
(35⅜"/43¼" x 102⅜", H 28¾"),
Folded depth 110 (43¼"),
width 56 (22"), height 160 (63")
Aluminium coated foot sections, uprights and underframes, coated
connecting bar
Additional charges/reduced prices
specific to range
Polished aluminium feet, aluminium clear anodised upright and
underframes, silver satin coated connecting bar
Bright chrome plated aluminium feet, aluminium black coated
upright and frames, black coated connecting bar
Bright chrome plated aluminium feet and upright, aluminium black
coated underframes, black coated connecting bar
Bright chrome plated aluminium feet and upright, aluminium black
coated underframes, bright chrome plated connecting bar
2
€
€
Barrel-shaped
1
Laminate
Confair
Folding tables
1
Depth
Length
180(70⅞")
240(94½")
260(102⅜")
280(110¼")
90/110
(35⅜"/43¼")
–
–
4814
–
90/120
(35⅜"/47¼")
4736
4948
4979
5007
180(70⅞")
240(94½")
260(102⅜")
280(110¼")
–
–
5239
–
5059
5397
5441
5485
180(70⅞")
240(94½")
260(102⅜")
280(110¼")
–
–
5882
–
5554
6057
6129
6200
180(70⅞")
240(94½")
260(102⅜")
280(110¼")
–
–
5510
–
5262
5678
5737
5797
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 79.
The relevant ITS must be ordered separately (see page 78).
1
2
76
–
Confair folding table
Mounting positions
A1
B1
A3
B3
440/00
Mounting positions for integrated techni-stations
Position A1 / A3 with cable channel cover only for 90 – 120 cm table depths
Position B1 / B3 with storage net
M1
A1
M1
M3
A3
M3
Position B1 / B3
3 modules from 180 to 300 cm table width
4 modules only from 210 cm table width
440/00
Mounting positions for single table portals
Position A1 / A3 with cable basket for 105 – 120 cm table depths
Single table portals with identical swing
Position M1 / M3 only for Wilkhahn single table portal set with socket strip
Single table portals with identical or alternate swing
Wilkhahn must check table connector panels provided by the customer
B1
M1
B3
M3
440/2
Mounting positions for integrated techni-stations (barrel-shaped)
Position B1 / B3 with storage net
Position B1 / B3
3 modules 180 cm table width
4 modules only from 240 cm table width
Mounting positions for single table portals
Position B1 / B3 with storage net
Single table portals with identical or alternate swing
Position M1 / M3 only for Wilkhahn single table portal set with socket strip
Wilkhahn must check table connector panels provided by the customer
Possible mounting position for cable outlet or integrated
techni-station Compact
Possible mounting position for integrated techni-station
on both sides or single table portals
77
Confair folding table
Modules with power supply
Ex-factory price * €
Integrated techni-station on both sides (ITS)
701/60
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Integrated opening mechanism at the touch of a button
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
* No discounts for ex-factory prices.
78
701/70
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
Integrated opening mechanism at the touch of a button
221
96
396
Additional charge
Cable harness covered with black fabric sleeving
96
701/95
3 modules:
1 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x USB 3.0 port
51
Confair folding table
Modules with power supply
€
Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides.
Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°.
Included in the set prices
Cables are routed via the table frame’s upright to the floor.
Cable basket to mount under the table top. Mount (metal bracket) for power strips.
or
storage net and mount (metal bracket)for socket strip.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle.
Included in the set prices
Cables are routed via the table frame’s upright to the floor.
Cable basket to mount under the table top. Mount (metal bracket) for power strips.
or
storage net and mount (metal bracket)for socket strip.
708/1
Socket strip
3 Modules:
3 x power supply modules (when ordering state the national standard)
708/2
Socket strip
3 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
708/4
Socket strip
4 Modules:
4 x power supply modules (when ordering state the national standard)
43
205
51
708/5
Socket strip
4 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6
Socket strip
5 Modules:
3 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x data module with 1 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8
Input cable
3 x 1.5 mm2 (⅛"), black
Schuko right angle plug + jack GST18/3
Length approx. 300 cm (118⅛")
21
708/9
Extension lead
3 x 1.5 mm2 (⅛"), black
plug + jack GST18/3
Length approx. 100 cm (39⅜")
13
79
Confair folding table
Accessories
Cable cover
made of aluminium sheet, coated black with strain anchors affixed
to the table top on both sides.
Cable clip on the table leg
made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s
upright.
Textile sleeving for cables
elastic, polyester
Cable basket for mounting under the table top
curved, perforated metal basket, coated black, retractable
Storage net
polyester, black
Mount for attaching powerstrips
metal bracket
80
540 range
Contas
Design: wiege, Fritz Frenkler, Anette Ponholzer
Technical details
Function
Lightweight, flexible conference table system that can be used in multi-purpose conference, seminar and
training environments. It consists of
individual tables that can be optionally stacked and folded. It has
connecting leaves with quick and
easy tool-free linkage thanks to a
patented multiple connector plate,
making a variety of configurations
possible.
Frame
Legs in round steel tubing Ø 38 mm
(1½"), bright chrome plated or coated.
Adjustable glides (with disc profile
on folding-leg table version) in
black polyamide for soft floors
(standard) and in black polyurethane for hard floors (please specify
when ordering).
Optionally, as stackable version (integral separator) with legs that are
locked in place using a retaining
clamp integrated into the table top.
Leg retaining clamp in black polyamide.
Multiple connector plate on tables
and connecting leaves in die-cast
zinc, bright chrome plated or coated. Multiple connector plate on the
connecting leaves fitted with separator and retention mechanism.
Tables fitted with table-to-table
connectors.
Core material of table top
Particle board with straight,
­concealed lipping.
Table top group 1 – laminate
Table top thickness 34 mm (1⅜")
Laminate according to Wilkhahn
colour and surface finish samples
with beech lipping, natural oiled
finish.
Table top group 2 – veneer
Table top thickness 34 mm (1⅜")
Variation 1: Beech, oak or ash veneer according to Wilkhahn woodstain colour samples with wood lipping, as far as possible in the same
colour as the veneer. Variation 2:
Maple, elm or walnut veneer,
as well as Wilkhahn veneer Mocca
according to Wilkhahn woodstain
colour samples with wood lipping,
as far as possible in the same colour
as the veneer.
Modesty panels
Modesty panels with aluminium
frame, coated with a silver satin
­finish, covered with transparent
­anthracite fabric. Grips in black
­polyamide.
Standards
The Contas tables comply with
DIN EN 527.
When placing repeat orders,
please indicate whether your
tabletops have slip-matched or
book-matched veneer.
Veneer types
As a standard, the veneers are
made by slip-match method.
Surfaces sealed with clear lacquer:
open pore: Oak, ash, walnut and
elm veneer, as well as Wilkhahn
Mocca veneer Closed-pore: maple
and beech veneer.
Some specific growth features
­possible.
Table top group 3 – linoleum
Table top thickness 35 mm (1⅜")
­Linoleum according to Wilkhahn
­linoleum colour samples, laminated
beech lipping, natural oiled finish.
Further surfaces for the formats
shown in the price list are available
on request.
Frame versions
Table frame and edge profiles
51
53
60
Accessories
Bright chrome plated
Coated black
Coated, silver satin finish
546/75 Four-wheeled trolley to take five folding tables 540/15 (table depth 75 cm)
546/90 Four-wheeled trolley to take five folding tables 540/25 (table depth 90 cm)
549/02 Modesty panel Length 65 (25⅝"), H 40 (15¾"), for models 540/11 and
short edges of models 540/15 and 540/18
549/03 Modesty panel Length 80 (31½"), H 40 (15¾"), for the front edges of the 540/25 and 540/28
models
549/04 Modesty panel Length 140 (55⅛"), H 40 (15¾"), for models 540/15 and 540/25
549/05 Modesty panel Length 170 (66⅞"), H 40 (15¾"), for models 540/18 and 540/28
549/10 Modesty panel Length 148 (58¼"), H 40 (15¾"), for models 541/15 and 541/25
549/20 Table-table connector 549/21 Table-connecting leaf connector €
1245
1245
394
411
578
593
593
14
17
81
541/15
75 x 150 (29½" x 59")
Frame aluminium coated
Additional charge
Frame aluminium bright chrome plated
Linoleum
Contas
Connecting leaf, panel depth 75 cm (29½")
€
€
€
1275
1503
1686
1567
364
176
364
176
364
176
364
1578
2004
2324
2174
394
176
394
176
394
176
394
1822
2263
2626
2477
411
176
411
176
411
176
411
1
2
Table top group
2
3
Linoleum
Additional charges
Frame aluminium bright chrome plated
As folding table
Veneer variation 2
540/18
75 x 180, H 73 (29½" x 70⅞", H 28¾")
Frame aluminium coated
€
Veneer variation 2
Additional charges
Frame aluminium bright chrome plated
As folding table
Veneer variation 1
540/15
75 x 150, H 73 (29½" x 59", H 28¾")
Frame aluminium coated
Table top group
2
3
Veneer variation 1
Additional charges
Frame aluminium bright chrome plated
As folding table
2
Laminate
540/11
75 x 75, H 73 (29½" x 29½", H 28¾")
Frame aluminium coated
1
Laminate
Contas
Fixed-leg and folding leg tables, table top depth 75 cm (29½")
€
€
€
€
1240
1666
1986
1836
149
149
149
149
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See
accessories for corresponding modesty panels to fit long edges and short edges.
82
Additional charge
Frame aluminium bright chrome plated
Linoleum
€
€
€
1749
2108
2461
2324
410
176
410
176
410
176
410
1959
2338
2748
2582
425
176
425
176
425
176
425
1
2
Table top group
2
3
Linoleum
541/25
90 x 150 (35⅜" x 59")
Frame aluminium coated
Veneer variation 2
Contas
Connecting leaf, panel depth 90 cm (35⅜")
€
Veneer variation 2
Additional charges
Frame aluminium bright chrome plated
As folding table
Veneer variation 1
540/28
90 x 180, H 73 (35⅜" x 70⅞", H 28¾")
Frame aluminium coated
Table top group
2
3
Veneer variation 1
Additional charges
Frame aluminium bright chrome plated
As folding table
2
Laminate
540/25
90 x 150, H 73 (35⅜" x 59", H 28¾")
Frame aluminium coated
1
Laminate
Contas
Fixed-leg and folding leg tables, table top depth 90 cm (35⅜")
€
€
€
€
1409
1768
2121
1984
149
149
149
149
All tables are fitted with glides for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft glides when ordering (no additional charge). See
accessories for modesty panels to fit long edges and short edges.
83
544 range
Concentra
Design: wiege
Technical details
Function
Tables for versatile furnishing of
­offices and communication areas,
as a combination or as stand-alone
for project work, training and seminars, lounges, bistros, canteens and
recreational areas etc.
Power supply
84
Frame
Legs made of round steel tube,
40 mm (15/8“) in diameter, bright
chrome plated or black, white or
­silver satin finish. Multi-purpose,
polyamide glides in black for soft
and hard floorings. Die-cast zinc table-leg mounts to match the table
legs, optionally bright chrome-plated or coated.
Underframe attached with screws
and with underframe profiles made
of square steel tubing (35 x 25 mm
(1⅜" x 1") and black-coated corner
angles made of die-cast zinc.
Core material of table top
E1 plywood tabletop or singlepane reinforced glass.
Table top group 1 – laminate
Table top thickness 19 mm (¾")
Laminate according to the
Wilkhahn colour and surface
­samples with polypropylene plastic
lipping.
Table top group 2 – veneer
Table top thickness 19 mm (¾")
Variation 1:
Beech, oak and ash veneer according to Wilkhahn woodstain colour
samples with wooden lipping, as
far as possible in the same colour as
the veneer.
Variation 2:
Maple, walnut or elm veneer, as
well as Wilkhahn mocca veneer
with wood lipping, as far as possible in the same colour as the
­veneer.
Closed-pore: maple and beech
­veneer.
Some specific growth features
­possible.
Tabletop group 5 – direct coating
Table top thickness 19 mm (¾")
Melamine resin, directly coated in
white or light grey with plastic
­lipping in the same colour as the
surface made of ABS.
Table top group 11 - glass
Table top thickness 10 mm (¾")
Tabletop 10 mm (⅜“) thick, singlepane reinforced glass on the bottom optionally opaquely coated in
white or black, chamfered and polished lipping with bumpers made
of stainless steel 10 mm (⅜") thick.
Further surfaces for the formats
shown in the price list are available
on request.
Modesty panels
Aluminium frame, black coated and
covered with black fabric.
Table-table-connectors (optional)
2 sheet-steel connectors, black
coated, 4 star-grip screws.
Accessories
Cable outlet
Aluminium cable outlet Aluminium
cable outlet, 85 mm (3⅜“) in diameter, coated black, or clear anodised
(only for tabletop groups 1 and 2)
or in plastic, 80 mm (3⅛“) in diameter, in black (for tabletop groups 5,
1 and 2).
Drill holes and assembly only in the
factory when the tables are ordered.
Standards
The Concentra tables comply
with the DIN EN 527 and
ANSI / BIFMA X 5.5 standards.
Cable track profile
Aluminium extruded profile, clear
anodised, which is screwed underneath the tabletop and serves as a
support for the cable track.
Cable track
Polypropylene cable track in black
with sections for two different
­cables.
Vertical cable riser
Polyamide links in black, plastic foot
section in black with a steel core.
Adapter for cable track in black
plastic. Length 80 cm (31½").
Frame versions
49
51
53
60
Legs and capitals
Under frames and corner angles
Coated signal white
Bright chrome plated
Coated black
Coated, silver satin finish
Coated black
Coated black
Coated black
Coated black
€
Accessories
Table-table connector (2 units)
Modesty panel 640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾")
Modesty panel 690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾")
Modesty panel 790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾")
Modesty panel 890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾")
Modesty panel 1390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾")
Modesty panel 1490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾")
Modesty panel 1690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾")
Modesty panel 1890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾")
Cable outlet Black plastic, Ø 80 mm (3⅛"), for tabletop groups 5, 1 and 2
Cable outlet Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2
Cable outlet Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2
Cable management horizontal Cable track to fit to the cable track profile underneath the
tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position
see drawing
548*
Cable management vertical Cable riser with adapter to connect with the cable track’s profile, foot
section with steel core
* not for glass tops
544
545/01
545/02
545/03
545/04
545/05
545/06
545/07
545/08
707/1*
707/2*
707/3*
547*
33
280
282
288
292
354
381
393
407
58
126
126
88
47
85
Rectangular
544/00
e.g. 80 x 160, H 73
(31½" x 63", H 28¾")
Frame coated
5
1
2
2
11
Bonded surface
Laminate
Veneer variation 1
Veneer variation 2
Glass
Table top group
Concentra
Tables
€
€
€
€
€
617
827 1046 1152 1685
Depth
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
75
(29½")
547
–
–
608
•
646
•
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
711
–
–
806
•
878
•
–
727
–
•
827
•
•
–
–
753
878
•
950
•
–
–
–
•
•
•
1097
–
–
–
–
1197
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
843
–
–
1015
•
1097
•
–
874
–
•
1046
•
•
–
–
905
1097
•
1180
•
–
–
–
•
•
•
1312
–
–
–
–
1456
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
919
–
–
1120
•
1219
•
–
954
–
•
1152
•
•
–
–
987
1219
•
1318
•
–
–
–
•
•
•
1466
–
–
–
–
1621
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
1076
–
–
1588
•
1745
•
–
1128
–
•
1685
•
•
–
–
1239
1745
•
1902
•
–
–
–
•
•
•
2156
–
–
–
–
2687
–
–
Length
80
(31½")
–
556
–
•
617
•
•
90
(35⅜")
–
–
567
646
•
684
•
100
(39⅜")
–
–
–
•
•
•
798
160
(63")
–
–
–
–
866
–
–
• available on request – not available
Round
Ø 126, H 73 (49⅝", H 28¾")
Frame coated
673
870
1100
1224
1692
€
Additional charges/reduced prices
specific to range
86
Frame bright chrome plated
104
600 range
Conversa
Design: wiege
Technical details
Function
Tables for versatile furnishing of offices and communication areas, as a
combination or stand-alone for
project work, training and seminars, lounges, bistros, canteens and
recreational areas etc.
Frame
Legs made of square steel tube
(40 x 40 mm (15/8" x 15/8")), bright
chrome plated or black, white or
­silver satin finish. Multi-purpose,
polyamide glides in black for soft
and hard floorings. Die-cast zinc
­table-leg mounts to match the table legs, optionally bright chromeplated or coated.
Underframe attached with screws
and with underframe profiles made
of square steel tubing (35 x 25 mm
(1⅜" x 1") and black-coated corner
angles made of die-cast zinc.
Core material of table top
E1 plywood tabletop or singlepane reinforced glass.
Table top group 1 – laminate
Table top thickness 19 mm (¾")
Laminate according to the
Wilkhahn colour and surface
­samples with ABS plastic lipping.
Table top group 2 – veneer
Table top thickness 19 mm (¾")
Variation 1:
Beech, oak and ash veneer according to Wilkhahn woodstain colour
samples with wooden lipping, as
far as possible in the same colour as
the veneer.
Variation 2:
Maple, walnut or elm veneer, as
well as Wilkhahn mocca veneer
with wood lipping, as far as possible in the same colour as the
­veneer.
Closed-pore: Maple and beech
­veneer.
Some specific growth features
­possible.
Power supply
87
Tabletop group 5 – direct coating
Table top thickness 19 mm (¾")
Melamine resin, directly coated in
white or light grey,
with ABS plastic lipping, colour
matched with the surface.
Table top group 11 - glass
Table top thickness 10 mm (¾")
Single-pane reinforced glass on the
bottom optionally opaquely coated
in white or black, chamfered and
polished lipping with bumpers
made of stainless steel 10 mm (⅜")
thick.
Modesty panels
Aluminium frame, black coated and
covered with black fabric.
Table-table-connectors (optional)
2 sheet-steel connectors, black
coated, 4 star-grip screws.
Accessories
Cable outlet
Aluminium cable outlet Aluminium
cable outlet, 85 mm (3⅜“) in diameter, coated black, or clear anodised
(only for tabletop groups 1 and 2)
or in plastic, 80 mm (3⅛“) in diameter, in black (for tabletop groups 5,
1 and 2).
Drill holes and assembly only in
the factory when the tables are
­ordered.
Standards
The Conversa tables comply
with the DIN EN 527 and
ANSI / BIFMA X 5.5 standards.
Cable track profile
Aluminium extruded profile,
clear anodised, which is screwed
on ­underneath the tabletop and
serves as a support for the cable
track.
Further surfaces for the formats
shown in the price list are available
on request.
Cable track
Polypropylene cable track in black
with sections for two different
­cables.
Vertical cable riser
Polyamide links in black, plastic foot
section in black with a steel core.
Adapter for cable track in black
plastic. Length 80 cm (31½").
Frame versions
49
51
53
60
Legs and capitals
Under frames and corner angles
Coated signal white
Bright chrome plated
Coated black
Coated, silver satin finish
Coated black
Coated black
Coated black
Coated black
€
Accessories
88
Table-table connector (2 units)
Modesty panel 640 mm (25¼") for table depth 750 mm (29½") table width, H 400 mm (15¾")
Modesty panel 690 mm (27⅛") for table depth 800 mm (31½") table width, H 400 mm (15¾")
Modesty panel 790 mm (35⅛") for table depth 900 mm (35⅜") table width, H 400 mm (15¾")
Modesty panel 890 mm (35") for table depth 1000 mm (39⅜") table width, H 400 mm (15¾")
Modesty panel 1390 mm (54¾") for table depth 1500 mm (59") table width, H 400 mm (15¾")
Modesty panel 1490 mm (58⅝") for table depth 1600 mm (63") table width, H 400 mm (15¾")
Modesty panel 1690 mm (66½") for table depth 1800 mm (70⅞") table width, H 400 mm (15¾")
Modesty panel 1890 mm (74⅜") for table depth 2000 mm (78¾") table width, H 400 mm (15¾")
Cable outlet Black plastic, Ø 80 mm (3⅛"), for tabletop groups 5, 1 and 2
Cable outlet Aluminium coated black, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2
Cable outlet Aluminium clear anodized, Ø 85 mm (3⅜"), only for tabletop groups 1 and 2
Cable management horizontal Cable track to fit to the cable track profile underneath the
tabletop with strain anchor, for a cable outlet on the left, right or in the centre, for defined position
see drawing
603*
Cable management vertical Cable riser with adapter to connect with the cable track’s profile, foot
section with steel core
* not for glass tops
600
601/01
601/02
601/03
601/04
601/05
601/06
601/07
601/08
707/1*
707/2*
707/3*
602*
33
280
282
288
292
354
381
393
407
58
126
126
88
47
Rectangular
600/00
e.g. 80 x 160, H 73
(31½" x 63", H 28¾")
Frame coated
5
1
2
2
11
Bonded surface
Laminate
Veneer variation 1
Veneer variation 2
Glass
Table top group
Conversa
Tables
€
€
€
€
€
617
827 1046 1152 1685
Depth
Length
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
75
(29½")
547
–
–
608
•
646
•
80
(31½")
–
556
–
•
617
•
•
90
(35⅜")
–
–
567
646
•
684
•
100
(39⅜")
–
–
–
•
•
•
798
160
(63")
–
–
–
–
866
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
711
–
–
806
•
878
•
–
727
–
•
827
•
•
–
–
753
878
•
950
•
–
–
–
•
•
•
1097
–
–
–
–
1197
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
843
–
–
1015
•
1097
•
–
874
–
•
1046
•
•
–
–
905
1097
•
1180
•
–
–
–
•
•
•
1312
–
–
–
–
1456
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
919
–
–
1120
•
1219
•
–
954
–
•
1152
•
•
–
–
987
1219
•
1318
•
–
–
–
•
•
•
1466
–
–
–
–
1621
–
–
75(29½")
80(31½")
90(35⅜")
150(59")
160(63")
180(70⅞")
200(78¾")
1076
–
–
1588
•
1745
•
–
1128
–
•
1685
•
•
–
–
1239
1745
•
1902
•
–
–
–
•
•
•
2156
–
–
–
–
2687
–
–
• available on request – not available
€
Additional charges/reduced prices
specific to range
Frame bright chrome plated
104
89
610 range
Timetable
Design: Andreas Störiko
Technical details
Function
A mobile table range with table
tops that can be flipped up in the
middle on the long sides which
­automatically causes the feet on
the table to turn in (does not apply
to Timetable Smart and Timetable
Shift models). Suitable for multipurpose spaces for interactive and
dynamic types of conferences. Ideal
in combination with the Confair
range and the Logon table range
for multi-purpose use of high-quality conference, lecture and meeting
spaces. Timetable Smart is ideal
for multi-purpose interiors and for
hot desking.
When flipped up it nests very
­compactly into the other tables,
­Timetable Smart has a locking
mechanism and staggered nesting
capabilities.
Frame
Timetable Shift
Timetable / Timetable Smart
Foot section in die-cast aluminium,
bright chrome plated or polished.
Uprights and underframes in steel
tube, silver, satin finish, or black.
Uprights optionally available with a
bright chrome-plated finish (standard Timetable only). Table top bearer in die-cast zinc, coated black,
Timetable Smart has table top
bearer in steel profile, draw rod in
round steel tubing and is coated
black. Lockable, height-adjustable
swivel castors with a black polyamide tyre are the standard version for
carpeted floors; castors available
with a polyurethane tyre for hard
floors (please specify when ordering).
Standards
The Timetable Shift tables comply
with the DIN EN 527 standard.
Die-cast aluminium base, bright
chrome plated, polished or silver
satin finish or black coating. Aluminium profile upright, clear anodized or silver satin finish, or black
coating; bright chrome-plated foot
sections are coated in black. Upright optionally available bright
chrome plated. Aluminium profile
underframe with integrated cable
channel, depending on the foot
section, silver satin finish or black
coated. Steel profile table top bearer. Round steel tubing draw rod,
depending on foot section, black or
silver satin finish coating. Lockable,
height-adjustable polyamide swivel
castors.
Core material of table top
Particle board with bullnose wood
lipping with integral, impact-resilient profile in black elastomer.­
Timetable Smart with melamine
resin directly coated in light or
dark grey and with straight, colourmatched plastic lipping, or optionally with plywood with bullnose,
wood edge with integrated impact-resilient profile made of black
elastomer.
90
Table top group 1 – laminate
Table top thickness 26 mm (1⅜")
Laminate according to Wilkhahn
colour and surface finish samples
with beech lipping, natural oiled
finish.
Table top group 2 – veneer
Table top thickness: 26 mm (1")
­Variation 1: Beech, oak and ash
­veneer from Wilkhahn woodstain
colour samples with wood lipping,
as far as possible in the same colour
as the veneer.
Variation 2: Maple, walnut or elm
veneer, as well as Wilkhahn mocca
veneer with wood lipping, as far as
possible in the same colour as the
veneer.
Veneer types
As a standard, the veneers are
made by slip-match method.
Surfaces sealed with clear lacquer:
open pore: Oak, ash, walnut and
elm veneer, as well as Wilkhahn
Mocca veneer Closed-pore: maple
and beech veneer. Maple and
beech veneer.
Some specific growth features
­possible.
Table top group 3 – linoleum
Table top thickness 27 mm (11/8").
Linoleum according to Wilkhahn
­linoleum colour samples, laminated
beech lipping, natural oiled finish.
Tabletop group 5 – direct coating
(only Timetable Smart)
Table top, thickness 25 mm (1”)
With melamine resin with direct
coating in light or dark grey with
plastic lipping in the same colour as
the surface.
Further surfaces for the formats
shown in the price list are available
on request.
Modesty panels
Modesty panels with aluminium
frame, coated with a silver satin finish, covered with transparent anthracite fabric. Grips in black polyamide.
When placing repeat orders,
please indicate whether your
tabletops have slip-matched or
book-matched veneer.
Table-table-connectors (optional)
Metal table-table-connectors model 613: 2 lockable circlips made of
black coated sheet steel with 4 stargrip screws and additionally for
Timetable Smart:plastic table-tableconnectors . Model 616: 2 rotatable
circlips with 2 collets in black,
through-dyed, glass fibre-reinforced polyamide with washers.
Edge profiles
Standard version:
Bullnose double with integral, impact-resilient profile
Alternatively:
Straight with integral, impact-resilient profile
Frame versions
Foot section
51 Bright chrome plated
52 Aluminium polished
Upright and underframe
Top bearer
Silver satin finish or black coating or
bright cromium plated
Coated silver satin finish or black
(­Timetable / ­Timetable Smart)
Uprights clear anodized
(­Timetable Shift)
Coated silver satin finish or black
Coated black
53 Coated black
(Timetable Shift)
60 Coated, silver satin finish Coated silver satin finish or black
(Timetable Shift)
Accessories Timetable Shift
Coated black
(­Timetable / ­Timetable Smart)
Coated silver satin finish or black
(­Timetable Shift)
Coated silver satin finish or black
Coated silver satin finish or black
614/1  Set of sockets complete, incl. socket strip mod. 708/1
614/2  Set of sockets complete, incl. socket strip mod. 708/2
614/4  Set of sockets complete, incl. socket strip mod. 708/4
614/5  Set of sockets complete, incl. socket strip mod. 708/5
614/6  Set of sockets complete, incl. socket strip mod. 708/6
614/8  Strain anchor with insertion plate and fastening material (without socket strip)
614/9  Cable holder (1 item)
614/91 Cable clip for vertical cable management on the column (2 items)
€
100
272
113
601
377
27
6
18
91
Table top group
3
Linoleum
2
Veneer variation 2
610/00
e.g. 75 x 150, H 73 (29½" x 59", H 28¾"), compact storage
Foot sections aluminium polished, upright and underframe
aluminium coated
2
Veneer variation 1
€
Rectangular
1
Laminate
Timetable
Tables
€
€
€
€
1719
1987
2290
2121
Additional charges/reduced prices
specific to range
Foot section bright chrome plated, upright and underframe
aluminium coated
Foot section and upright bright chrome plated, underframe
aluminium coated
60
•
•
•
•
102
•
•
•
•
Modesty panel aluminium coated (length 140 cm (55⅛"))
Modesty panel aluminium coated (length 150 cm (59"))
Modesty panel aluminium coated (length 160 cm (63"))
Modesty panel aluminium coated (length 180 cm (70⅞"))
634
639
647
657
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
96
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
104
•
•
•
•
Table-table-connectors model 613, metal (2 items)
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
Depth
Length
140(55⅛")
150(59")
160(63")
180(70⅞")
60
(23⅝")
1516
1573
1630
1687
70
(27½")
1588
1954
2018
2071
75
(29½")
1662
1719
2062
1805
140(55⅛")
150(59")
160(63")
180(70⅞")
1689
1774
1858
1942
1796
2258
2364
2441
1902
1987
2438
2128
140(55⅛")
150(59")
160(63")
180(70⅞")
1909
2022
2137
2248
2043
2588
2734
2832
2176
2290
2808
2483
140(55⅛")
150(59")
160(63")
180(70⅞")
1776
1875
1974
2070
1796
2398
2525
2607
2022
2121
2593
2289
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 98.
The relevant ITS must be ordered separately (see page 97).
1
2
All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
92
Linoleum
Table top group
2
3
Veneer variation 2
2
Veneer variation 1
Additional charges
Foot section bright chrome plated, upright and
underframe aluminium coated
Particle board with bullnose wood lipping with
integral, impact-resilient profile in black elastomer
Table-table-connectors model 613, metal (2 items)
Table-table-connectors model 616, plastic (2 items)
Preparation for ITS 701/60 or 701/70, set price
includes: cut-out section, cable cover, cable
management below the table top, optionally with
hook and loop strap, cable clips. 1
Preparation for ITS 701/95, set price includes: cutout section, cable cover, cable management below
the table top, optionally with hook and loop strap,
cable clips. 1
1
Laminate
612/51
60 x 150, H 73 (23⅝" x 59", H 28¾"), compact storage
Foot sections aluminium polished, upright and
underframe aluminium coated
5
Bonded surface
Timetable Smart
Tables
€
€
€
€
€
60
60
60
60
60
–
–
64
337
96
64
606
96
64
909
96
64
740
96
64
–
193
193
193
–
–
104
104
104
–
60
60
60
60
60
–
–
64
347
96
64
618
96
64
925
96
64
754
96
64
–
193
193
193
–
–
104
104
104
–
960
The relevant ITS must be ordered separately (see page 97).
1
612/51
75 x 150, H 73 (29½" x 59", H 28¾"), compact storage
Foot sections aluminium polished, upright and
underframe aluminium coated
Additional charges
Foot section bright chrome plated, upright and
underframe aluminium coated
Particle board with bullnose wood lipping with
integral, impact-resilient profile in black elastomer
Table-table-connectors model 613, metal (2 items)
Table-table-connectors model 616, plastic (2 items)
Preparation for ITS 701/60 or 701/70, set price
includes: cut-out section, cable cover, cable
management below the table top, optionally with
hook and loop strap, cable clips. 1
Preparation for ITS 701/95, set price includes: cutout section, cable cover, cable management below
the table top, optionally with hook and loop strap,
cable clips. 1
965
The relevant ITS must be ordered separately (see page 97).
1
– not available
All tables are fitted with castors for soft floors (e.g. carpet). For hard floors (e.g. stone, parquet), please specify soft castors when ordering (no additional charge).
93
Table top group
Veneer variation 2
Linoleum
Table-table-connectors model 613, metal (2 items)
Set price single table portal 300 x 150 mm, including cable channel 1
Set price single table portal 300 x 120 mm, including cable channel 1
Set price single table portal 300 x 150 mm, including fastening
material in the underframe 1
Set price single table portal 300 x 120 mm, including fastening
material in the underframe 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
3
Veneer variation 1
Modesty panel aluminium coated (length 150 cm (59"))
Modesty panel aluminium coated (length 160 cm (63"))
Modesty panel aluminium coated (length 180 cm (70⅞"))
Modesty panel aluminium coated (length 200 cm (78¾"))
Modesty panel aluminium coated (length 210 cm (82⅝"))
2
€
€
€
1911
2273
2661
2456
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
639
647
657
668
801
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
96
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
715
926
926
–
131
•
•
•
•
193
•
•
•
•
104
•
•
•
•
614/00
e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾"), compact storage
Aluminium-coated foot section, uprights and under-frames coated
Additional charges/reduced prices
specific to range
Polished aluminium foot section, uprights clear anodized,
underframes coated
Bright, chrome plated aluminium foot section, uprights and
underframes coated
Bright, chrome plated aluminium foot section, bright, chrome
plated uprights, underframes coated
2
€
€
Rectangular
1
Laminate
Timetable Shift
Tables
Depth
Length
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
80
(31½")
1901
1678
2137
2415
2661
90
(35⅜")
1678
2115
1911
2573
2393
100
(39⅜")
–
1950
2227
2504
3236
105
(41⅜")
–
–
2800
3047
2854
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
2222
1980
2576
2874
3155
1980
2546
2273
3048
2816
–
2327
2651
2976
3796
–
–
3260
3701
3348
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
2664
2311
3078
3325
3689
2311
3022
2661
3555
3260
–
2718
3085
3453
4354
–
–
3772
4270
3845
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
2479
2131
2844
3153
3528
2131
2797
2456
3288
3027
–
2513
2861
3211
4151
–
–
3560
3854
3595
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 98.
The relevant ITS must be ordered separately (see page 97).
1
2
94
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm, including fastening
material in the underframe 1
Set price single table portal 300 x 120 mm, including fastening
material in the underframe 1
2
€
€
€
2335
2759
3193
2969
78
•
•
•
•
164
•
•
•
•
370
•
•
•
•
715
926
926
–
•
•
•
•
614/42
e.g. 80/100 x 180, H 73 (31¼"/39⅜" x 70⅞", H 28¾"), compact
storage
Aluminium-coated foot section, uprights and under-frames coated
Additional charges/reduced prices
specific to range
Polished aluminium foot section, uprights clear anodized,
underframes coated
Bright, chrome plated aluminium foot section, uprights and
underframes coated
Bright, chrome plated aluminium foot section, bright, chrome
plated uprights, underframes coated
2
€
€
Barrel-shaped
1
Laminate
Timetable Shift
Tables
131
Depth
Length
180(70⅞")
210(82⅝")
80/100
(31½"/39⅜")
2335
–
80/105
(31½"/41⅜")
–
2962
180(70⅞")
210(82⅝")
2759
–
–
3455
180(70⅞")
210(82⅝")
3193
–
–
3953
180(70⅞")
210(82⅝")
2969
–
–
3703
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 98..
1
95
Timetable / Timetable Smart / Timetable Shift
Mounting positions
A1
A1
A1
A2
A3
A2
A3
A2
A3
610/00 Timetable
Single table portals for 75 and 80 cm table depths
Integrated techni-stations for 60 to 80 cm table depths
612/51 Timetable Smart
only integrated techni-stations possible,
single table portal not possible
614/00 Timetable Shift
Integrated techni-stations only possible in position A2, not in
position M2. Single table portals possible in position M2 and A2, in
position A2 only for 100 – 105 cm table depths
M2
614/42 Timetable Shift
single table portals only possible in position M2
M2
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated techni-station
on both sides or single table portals
96
Timetable / Timetable Smart / Timetable Shift
Modules with power supply
Ex-factory price * €
Integrated techni-station on both sides (ITS)
701/60
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Integrated opening mechanism at the touch of a button
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
701/70
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
Integrated opening mechanism at the touch of a button
221
96
396
Additional charge
Cable harness covered with black fabric sleeving
96
701/95
3 modules:
1 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x USB 3.0 port
51
* No discounts for ex-factory prices.
97
Timetable / Timetable Smart / Timetable Shift
Modules with power supply
€
Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides.
Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°.
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed via the table frame’s upright to the floor.
Including strain anchor, insertion plates and fastening material
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle.
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed via the table frame’s upright to the floor.
Including strain anchor, insertion plates and fastening material
708/1
Socket strip
3 Modules:
3 x power supply modules (when ordering state the national standard)
708/2
Socket strip
3 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
708/4
Socket strip
4 Modules:
4 x power supply modules (when ordering state the national standard)
98
43
205
51
708/5
Socket strip
4 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6
Socket strip
5 Modules:
3 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x data module with 1 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8
Input cable
3 x 1.5 mm2 (⅛"), black
Schuko right angle plug + jack GST18/3
Length approx. 300 cm (118⅛")
21
708/9
Extension lead
3 x 1.5 mm2 (⅛"), black
plug + jack GST18/3
Length approx. 100 cm (39⅜")
13
Timetable / Timetable Smart / Timetable Shift
Accessories
Cable cover
made of aluminium sheet, coated black with strain anchors affixed to the table top on both
sides.
Cable channels to integrate the socket strips
retractable, made of aluminium extruded profile, coated black with strain anchor and insertion
plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop
straps attached.
Cable holder under the table top with hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop
straps attached.
Cable clip on the table leg
made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s
upright.
Textile sleeving for cables
elastic, polyester
99
620 range
Logon
Design: Andreas Störiko
Technical details
Function
Stand-alone tables for use in offices, and system components for permanently linked table configurations in conference rooms. Ideal for
­combining with Confair folding
­tables for versatile, partitionable
conference rooms.
Frame
Foot section in die-cast aluminium,
bright chrome plated, polished
or coated black or silver, satin finish.
Aluminium profile uprights, clear
anodized or coated; coated black
for bright chrome plated foot section.
Die-cast aluminium table top bearer coated in either silver satin finish
or black, depending on foot section
version.
Aluminium profile underframe
­coated in silver satin ­finish or black,
depending on foot section version.
Uprights optionally available bright
chrome plated. Centre underframe
for table depths 75 – 90 cm
(29½" – 35⅜"); two separate
­underframes for table depths
105 – 130 cm (41⅜" – 51⅛").
­Adjustable glides in black poly­
amide. Lockable castors in black
polyamide.
Core material of table top
Particle board with bullnose double, wood lipping and impact-resilient profile in black elastomer.
MDF panel only in combination
with veneered surface finish with
colour-matched, chamfered wood
lipping (with a radiused edge).
For system elements: central joining edge straight without any profile.
Veneer version
As a standard, veneers are
­slip-matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Table top group 1 – laminate
Thickness 26 mm (1")
Laminate according to ­Wilkhahn
colour and surface finish samples
with wood lipping, natural oiled
­finish.
Table top group 3 – linoleum:
Thickness 27 mm (1⅛")
Linoleum according to ­Wilkhahn
­linoleum colour samples with
­laminated beech lipping, natural
oiled finish.
Table top group 2 – veneer
Table top thickness 26 mm (1")
Variation 1:
Beech, oak or ash veneer (exception: ash, natural finish, is not available with a chamfered edge version) ­according to ­Wilkhahn
woodstain colour samples with
wood lipping, as far as possible in
the same colour as the veneer.
Variation 2:
Maple (exception no natural maple
in chamfered-edge versions), walnut or elm veneer as well as
­Wilkhahn veneer Mocca ­according
to ­Wilkhahn woodstain colour samples with wood lipping, as far as
possible in the same colour as the
veneer. (Maple, natural finish, is not
available with a chamfered edge
version).
Further surfaces for the formats
shown in the price list are available
on request.
Single table portal
Portal with brushed profile the
same colour and material as the table top on both sides. Aperture
with real wood lipping, as far as
possible in the same colour as the
table top. Hinge can be opened to
180°.
Single table portal:
350 x 150 mm (13¾" x 5⅞") or 300
x 150 mm (11¾" x 5⅞")
Linoleum on request.
Standards
Logon tables conform to the
­Standard ANSI / BIFMA X 5.5.
When placing repeat orders,
please indicate whether your
­table tops have slip-matched
or book-matched veneer.
Modesty panels
Fluted extruded aluminium profile,
clear anodized or coated black.
Screw connectors to table top,
clear anodized.
Modesty panels may also be
­retro-fitted.
Price on request.
Edge profiles
Standard version:
Bullnose double with integral, impact-resilient profile
Alternatively:
Straight with integral, impact-resilient profile
Alternatively:
Chamfer edge profile on veneer version
Frame versions
Accessories
100
Foot section
Upright
Top bearer and underframe
51
Bright chrome plated
Coated black
52
53
60
Aluminium polished
Coated black
Coated, silver satin finish
Black coated or bright chrome
plated
Clear anodized
Coated black
Coated, silver satin finish
620/1 CPU holder 620/2 Vertical cable channel for channelling cables between uprights
Coated black or silver satin finish
Coated, silver satin finish
Coated black
Coated, silver satin finish
€
343
310
Table top group
3
Linoleum
2
Veneer variation 2
620/00
e.g. 120 x 240, H 73 (47¼" x 94½", H 28¾")
Foot section and upright aluminium coated
2
Veneer variation 1
€
Rectangular
1
Laminate
Logon
Tables
€
€
€
€
1878
1995
2539
2230
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium, coated black
Foot section and upright aluminium bright chrome plated
78
164
370
•
•
•
•
•
•
•
•
•
•
•
•
Modesty panel aluminium coated (length 150 cm (59"))
Modesty panel aluminium clear anodized (length 150 cm (59"))
Modesty panel aluminium coated (length 180 cm (70⅞"))
Modesty panel aluminium clear anodized (length 180 cm (70⅞"))
Modesty panel aluminium coated (length 240 cm (94½"))
Modesty panel aluminium clear anodized (length 240 cm (94½"))
384
407
443
468
601
638
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
With castors (available up to a max. length of 210 cm (78¾"))
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section, cable cover,
cable management below the table top, optionally with hook and loop strap, cable
clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes: cut-out section,
cable cover, cable management below the table top, optionally with hook and loop
strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable cover, cable
management below the table top, optionally with hook and loop strap, cable clips. 2
144
475
•
1058
•
•
1271
•
•
1271
•
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
Depth
Length
75
(29½")
80
(31½")
90
(35⅜")
100
(39⅜")
110
(43¼")
120
(47¼")
130
(51⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
220(86⅝")
230(90½")
240(94½")
300(118⅛")
1200
1536
1590
1680
1726
1749
1768
–
1675
1467
1818
1856
1926
1998
1713
–
1761
1793
1555
1634
1713
2081
2114
–
1799
1543
1636
1727
2094
1820
2154
2525
1844
1870
1940
2047
1820
2167
2185
2571
1914
1932
1968
2075
2174
2193
1878
2203
1930
1648
1690
1784
2247
2317
2347
2357
150(59")
160(63")
180(70⅞")
200(78¾")
220(86⅝")
230(90½")
240(94½")
300(118⅛")
1242
1600
1653
1752
1803
1835
1853
–
1737
1521
1893
1934
2006
2093
1794
–
1846
1891
1616
1704
1794
2188
2221
–
1868
1606
1710
1813
2201
1918
2274
2666
1930
1963
2037
2154
1918
2274
2321
2721
2000
2018
2068
2188
2285
2310
1995
2335
2027
1732
1779
1887
2369
2445
2493
2504
150(59")
160(63")
180(70⅞")
200(78¾")
220(86⅝")
230(90½")
240(94½")
300(118⅛")
1480
1891
1975
2104
2212
2261
2305
–
2033
1786
2212
2358
2505
2577
2206
–
2167
2233
1934
2068
2206
2703
2795
–
2248
1925
2081
2237
2759
2396
2904
3345
2339
2392
2513
2663
2396
2892
2943
3413
2424
2507
2552
2746
2903
2939
2539
2941
2505
2160
2201
2370
3024
3118
3173
3170
150(59")
160(63")
180(70⅞")
200(78¾")
220(86⅝")
230(90½")
240(94½")
300(118⅛")
1326
1706
1781
1901
1953
1996
2022
–
1846
1617
2006
2085
2178
2251
1957
–
1959
2017
1738
1847
1957
2414
2446
–
1996
1729
1858
1988
2424
2117
2568
2666
2111
2179
2236
2389
2117
2546
2597
3031
2189
2222
2273
2435
2532
2586
2230
2599
2221
1923
1955
2091
2642
2727
2788
2797
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
1 For details see page 120. 2 The relevant ITS must be ordered separately (see page 118).
101
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
2
€
€
€
2579
2712
3316
2977
78
•
•
•
•
164
370
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/42
e.g. 100/120 x 260, H 73
(39⅜"/47¼" x 102⅜", H 28¾"),
Foot section and upright aluminium coated
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
2
€
€
Barrel-shaped
1
Laminate
Logon
Tables
Depth
Length
240(94½")
260(102⅜")
300(118⅛")
100/120
(39⅜"/47¼")
2416
2579
–
100/130
(39⅜"/51⅛")
–
–
2895
240(94½")
260(102⅜")
300(118⅛")
2540
2712
–
–
–
3050
240(94½")
260(102⅜")
300(118⅛")
3114
3316
–
–
–
3746
240(94½")
260(102⅜")
300(118⅛")
2792
2977
–
–
–
3360
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
102
Table top group
Linoleum
3
Veneer variation 2
2
Veneer variation 1
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
2
€
€
€
€
1555
1616
1934
1738
78
•
•
•
•
164
370
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
€
620/11
e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾")
Foot section and upright aluminium coated
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
1
Laminate
Logon
Starting element
Depth
Length
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
80
(31½")
1467
1818
1856
1926
1713
90
(35⅜")
1793
1555
1634
1713
2114
100
(39⅜")
1543
1636
1727
2094
2154
110
(43¼")
1870
1940
2047
1820
2185
120
(47¼")
1932
1968
2075
2174
1878
130
(51⅛")
1648
1690
1784
2247
2347
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1521
1893
1934
2006
1794
1891
1616
1704
1794
2221
1606
1710
1813
2201
2274
1963
2037
2154
1918
2321
2018
2068
2188
2285
1995
1732
1779
1887
2369
2493
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1786
2212
2358
2505
2206
2233
1934
2068
2206
2795
1925
2081
2237
2759
2904
2392
2513
2663
2396
2943
2507
2552
2746
2903
2539
2160
2201
2370
3024
3173
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1617
2006
2085
2178
1957
2017
1738
1847
1957
2446
1729
1858
1988
2424
2568
2179
2236
2389
2117
2597
2222
2273
2435
2532
2230
1923
1955
2091
2642
2788
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
103
Table top group
Linoleum
3
Veneer variation 2
2
Veneer variation 1
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
2
€
€
€
€
1193
1254
1572
1376
39
•
•
•
•
82
185
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
€
620/21
e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾")
Foot section and upright aluminium coated
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
1
Laminate
Logon
Finishing element
Depth
Length
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
80
(31½")
1105
1457
1495
1564
1352
90
(35⅜")
1432
1193
1272
1352
1752
100
(39⅜")
1182
1274
1365
1732
1793
110
(43¼")
1508
1579
1686
1458
1823
120
(47¼")
1570
1606
1713
1813
1517
130
(51⅛")
1287
1329
1422
1885
1985
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1160
1531
1572
1645
1433
1529
1254
1342
1433
1859
1245
1349
1452
1839
1912
1602
1675
1793
1557
1960
1656
1707
1826
1923
1633
1371
1417
1525
2007
2131
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1424
1851
1996
2143
1844
1872
1572
1707
1844
2433
1563
1719
1876
2398
2542
2030
2151
2301
2034
2581
2146
2191
2384
2541
2177
1798
1839
2008
2662
2811
160(63")
180(70⅞")
200(78¾")
220(86⅝")
240(94½")
1255
1645
1723
1816
1595
1655
1376
1485
1595
2085
1368
1497
1626
2063
2206
1817
1875
2027
1755
2235
1860
1911
2073
2171
1868
1562
1593
1730
2280
2426
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
104
Table top group
3
Linoleum
2
Veneer variation 2
2
Veneer variation 1
€
620/31
e.g. 90 x 180, H 73 (35⅜" x 70⅞", H 28¾")
Foot section and upright aluminium coated
1
Laminate
Logon
Intermediate element
€
€
€
€
1193
1254
1572
1376
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium, coated
black
Foot section and upright aluminium bright chrome plated
39
•
•
•
•
82
185
•
•
•
•
•
•
•
•
Modesty panel aluminium coated (length 160 cm (63"))
Modesty panel aluminium clear anodized (length 160 cm (63"))
Modesty panel aluminium coated (length 180 cm (70⅞"))
Modesty panel aluminium clear anodized (length 180 cm (70⅞"))
Modesty panel aluminium coated (length 200 cm (78¾"))
Modesty panel aluminium clear anodized (length 200 cm (78¾"))
Modesty panel aluminium coated (length 220 cm (86⅝"))
Modesty panel aluminium clear anodized (length 220 cm (86⅝"))
384
407
443
468
567
602
601
638
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section,
cable cover, cable management below the table top, optionally with
hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes:
cut-out section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable cover,
cable management below the table top, optionally with hook and loop
strap, cable clips. 2
Depth
Length
160(63")
180(70⅞")
200(78¾")
220(86⅝")
80
(31½")
1105
1457
1495
1564
90
(35⅜")
1432
1193
1272
1352
100
(39⅜")
1182
1274
1365
1732
110
(43¼")
1508
1579
1686
1458
120
(47¼")
1570
1606
1713
1813
130
(51⅛")
1287
1329
1422
1885
160(63")
180(70⅞")
200(78¾")
220(86⅝")
1160
1531
1572
1645
1529
1254
1342
1433
1245
1349
1452
1839
1602
1675
1793
1557
1656
1707
1826
1923
1371
1417
1525
2007
160(63")
180(70⅞")
200(78¾")
220(86⅝")
1424
1851
1996
2143
1872
1572
1707
1844
1563
1719
1876
2398
2030
2151
2301
2034
2146
2191
2384
2541
1798
1839
2008
2662
160(63")
180(70⅞")
200(78¾")
220(86⅝")
1255
1645
1723
1816
1655
1376
1485
1595
1368
1497
1626
2063
1817
1875
2027
1755
1860
1911
2073
2171
1562
1593
1730
2280
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
105
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable
cover, cable management below the table top, optionally with hook
and loop strap, cable clips. 2
2
€
€
€
2228
2325
2776
2517
78
•
•
•
•
164
370
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/51
e.g. 100/130 x 180, H 73
(39⅜"/51⅛" x 70⅞", H 28¾")
Foot section and upright aluminium coated
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
2
€
€
Barrel-shaped
1
Laminate
Logon
Starting element
Depth
Length
160(63")
180(70⅞")
200(78¾")
100/130
(39⅜"/51⅛")
2187
2228
2322
160(63")
180(70⅞")
200(78¾")
2278
2325
2433
160(63")
180(70⅞")
200(78¾")
2735
2776
2945
160(63")
180(70⅞")
200(78¾")
2485
2517
2653
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
106
Table top group
Veneer variation 2
Linoleum
3
Veneer variation 1
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price
includes: cut-out section, cable cover, cable management below the
table top, optionally with hook and loop strap, cable clips. 2
2
€
€
€
1866
1963
2414
2155
39
•
•
•
•
82
185
•
•
•
•
•
•
•
•
475
1058
•
1271
•
1271
•
–
•
193
•
•
•
•
208
•
•
•
•
104
•
•
•
•
627/61
e.g. 100/130 x 180, H 73
(39⅜"/51⅛" x 70⅞", H 28¾")
Foot section and upright aluminium coated
Additional charges/reduced prices
specific to range
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
2
€
€
Barrel-shaped
1
Laminate
Logon
Finishing element
Depth
Length
160(63")
180(70⅞")
200(78¾")
100/130
(39⅜"/51⅛")
1825
1866
1960
160(63")
180(70⅞")
200(78¾")
1916
1963
2071
160(63")
180(70⅞")
200(78¾")
2373
2414
2583
160(63")
180(70⅞")
200(78¾")
2123
2155
2291
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 120.
The relevant ITS must be ordered separately (see page 118/119).
1
2
624/91
Corner element 90°
90 x 10 x R 227 x 10 x 90 x 30, H 73
(35⅜" x 3⅞" x R 89⅜" x 3⅞" x 35⅜" x 11¾", H 28¾")
Foot section and upright aluminium coated
Additional charges
Foot section aluminium polished, upright aluminium, clear
anodized
Foot section aluminium bright chrome plated, upright
aluminium, coated black
Foot section and upright aluminium bright chrome plated
Modesty panel aluminium coated
Modesty panel aluminium clear anodized
1094
1166
1432
1299
39
•
•
•
•
82
185
155
171
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
107
Table top group
Linoleum
3
Veneer variation 2
2
€
€
€
€
3547
4505
4720
4580
Additional charges
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
117
•
•
•
•
246
555
•
•
•
•
•
•
•
•
Preparation for ITS 701/95 or 701/85, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 1
104
•
•
•
–
Diameter
150(59")
160(63")
3526
3547
150(59")
160(63")
4390
4505
150(59")
160(63")
4577
4720
150(59")
160(63")
4443
4580
• available – not available
The relevant ITS must be ordered separately (see page 118/119).
1
108
2
Veneer variation 1
€
621/35
e.g. Ø 160, H 73
(Ø 63", H 28¾")
Foot section and upright aluminium coated
Frame with welded rectangular steel underframe
Veneer direction: cross veneer
1
Laminate
Logon
Table
Table top group
Diameter
180(70⅞")
220(86⅝")
3739
4619
180(70⅞")
220(86⅝")
4418
5249
180(70⅞")
220(86⅝")
5036
6000
180(70⅞")
220(86⅝")
4701
5622
Linoleum
3
Veneer variation 2
2
Veneer variation 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out
section, cable cover, cable management below the table top,
optionally with hook and loop strap, cable clips. 1
2
€
€
€
€
3739
4418
5036
4701
156
•
•
•
•
328
740
•
•
•
•
•
•
•
•
193
•
•
•
–
104
•
•
•
–
€
622/45
e.g. Ø 180, H 73
(Ø 70⅞", H 28¾")
Foot section and upright aluminium coated
Frame with welded rectangular steel underframe
Veneer direction: cross veneer
Additional charges
Foot section aluminium polished, upright aluminium, clear anodized
Foot section aluminium bright chrome plated, upright aluminium,
coated black
Foot section and upright aluminium bright chrome plated
1
Laminate
Logon
Table
• available – not available
The relevant ITS must be ordered separately (see page 118/119).
1
109
Logon
Examples of table configurations
Veneer variation 1
Veneer variation 2
Table top group
2
2
Laminate
1
€
€
€
13369
14237
15812
13945
14813
16388
622/00
V‑shaped configuration for video conference
310 x 364, H 73 / 150 x 384, H 73
(122" x 143¼", H 28¾" / 59" x 151⅛", H 28¾")
Table configuration for 10 – 12,
Comprising 3 table elements,
Veneer direction: cross veneer
(Optionally with modesty panels and modules with power supply on
request)
Foot section and upright aluminium coated,
foot plate coated black, central column coated
Foot section aluminium bright chrome plated,
upright aluminium, coated black, foot plate coated black,
central column bright chrome plated
110
Logon
Mounting positions
620/00
Mounting positions for all table widths,
table depths ≤ 90 cm
A2
A1
A3
620/00
Mounting positions from table widths of 200 cm,
table depths ≤ 90 cm
Single table portals with identical swing
620/00
Mounting positions for all table widths,
table depths > 90 cm
A2
Position A2
Single table portal and Basic integrated techni-station only from
120 cm table depth
Integrated Comfort techni-station and from both sides only
from 110 cm table depth
M2
A1
A3
M1
M3
620/00
Mounting positions from table widths of 200 cm,
table depths > 90 cm
Position A1 / A3
Single table portal and Basic integrated techni-station only from
120 cm table depth
Integrated Comfort techni-station and from both sides only from
110 cm table depth
Single table portals with identical swing
Position B1 / B3
Single table portals with identical or alternate swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for Comfort integrated technistation from both sides and Basic or single table portals
111
Logon
Mounting positions
620/11/21
Mounting positions for all table widths,
table depths ≤ 90 cm
A2
A1
620/11/21
Mounting positions from table widths of 200 cm,
table depths ≤ 90 cm
A3
620/11/21
Mounting positions for all table widths,
table depths > 90 cm
A2
Position A2
Single table portal and Basic integrated techni-station
only from 120 cm table depth
Integrated Comfort techni-station and from both sides
only from 110 cm table depth
M2
A1
A3
M1
M3
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
112
620/11/21
Mounting positions from table widths of 200 cm,
table depths > 90 cm
Position A1 / A3
Single table portal and Basic integrated techni-station
only from 120 cm table depth
Integrated Comfort techni-station and from both sides
only from 110 cm table depth
Logon
Mounting positions
620/31
Mounting positions for all table widths,
table depths ≤ 90 cm
A2
A1
A3
620/31
Mounting positions from table widths of 200 cm,
table depths ≤ 90 cm
620/31
Mounting positions for all table widths,
table depths > 90 cm
A2
Position A2
Single table portal and Basic integrated techni-station
only from 120 cm table depth
Integrated Comfort techni-station and from both sides
only from 110 cm table depth
M2
A1
A3
M1
M3
620/31
Mounting positions from table widths of 200 cm,
table depths > 90 cm
Position A1 / A3
Single table portal and Basic integrated techni-station
only from 120 cm table depth
Integrated Comfort techni-station and from both sides
only from 110 cm table depth
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
113
Logon
Mounting positions
627/42
M2
M1
M3
627/42
Single table portals with identical or alternate swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
114
Logon
Mounting positions
627/51/61
Mounting positions for all table widths
M2
627/51/61
Mounting positions from table widths of 200 cm
M1
M3
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
115
621/35
160 cm diameter
M2
622/45
180 cm diameter
M1
M3
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact / Move
possible mounting position for integrated techni-station
116
Logon
Mounting positions
622/45
220 cm diameter
A1
A3
M1
B1
M3
B3
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact / Move
possible mounting position for integrated techni-station
117
Logon
Modules with power supply
Ex-factory price * €
Integrated techni-station on both sides (ITS)
701/60
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Integrated opening mechanism at the touch of a button
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
* No discounts for ex-factory prices.
118
701/70
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
Integrated opening mechanism at the touch of a button
221
96
396
Additional charge
Cable harness covered with black fabric sleeving
96
701/95
3 modules:
1 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x USB 3.0 port
51
Logon
Modules with power supply
Ex-factory price * €
Integrated techni-station Basic (ITS)
701/00
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station Basic (ITS)
701/10
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾")
long
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station Comfort (ITS)
Integrated techni-station Comfort (ITS)
Integrated techni-station Move (ITS)
182
96
378
96
701/20
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 300 cm (13¾") long
1075
701/30
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 300 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾")
long
1153
701/85
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾")
long
375
Additional charge
Cable harness covered with black fabric sleeving
96
* No discounts for ex-factory prices.
119
Logon
Modules with power supply
€
Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides.
Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°.
Including cable channels to integrate the socket strips. When ordering, state the
socket strip’s installation angle: (15° tilted or vertical).
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed via the table frame’s upright to the floor, or optionally via the vertical
cable channel.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle.
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed via the table frame’s upright to the floor, or optionally via the vertical
cable channel.
708/1
Socket strip
3 Modules:
3 x power supply modules (when ordering state the national standard)
708/2
Socket strip
3 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
708/4
Socket strip
4 Modules:
4 x power supply modules (when ordering state the national standard)
120
43
205
51
708/5
Socket strip
4 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6
Socket strip
5 Modules:
3 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x data module with 1 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8
Input cable
3 x 1.5 mm2 (⅛"), black
Schuko right angle plug + jack GST18/3
Length approx. 300 cm (118⅛")
21
708/9
Extension lead
3 x 1.5 mm2 (⅛"), black
plug + jack GST18/3
Length approx. 100 cm (39⅜")
13
Logon
Accessories
Cable cover, for models 701/60 and 701/70
made of aluminium sheet, coated black with strain anchors affixed to the
table top on both sides.
Cable cover, for models 701/00, 701/10, 701/20 and 701/30
made of aluminium sheet, coated black with strain anchors affixed to the
table top on both sides.
Cable channels to integrate the socket strips
retractable, made of aluminium extruded profile, coated black with strain anchor and insertion
plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips
with hook and loop straps attached.
Cable holder under the table top with hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips with
hook and loop straps attached.
Cable clip on the table leg
made of black glass fibre-reinforced polyamide to accommodate the cable on the table frame’s
upright.
Textile sleeving for cables
Vertical cable channel, for model 620
121
632 range
Technical details
Function
Centre pedestal tables for meetings, cafeterias or dining rooms at
home.
Frame models 632/00,
diameter 90, 110, 125 cm
Steel disc base (Ø 610 mm) with
sheet steel cover, coated in white
or black, or with optional ultra-­
polished stainless steel cover. Steel
column to match the foot section,
coated in black or white, with stainless steel ultra-polished foot section, table column is bright chrome-­
plated. ­Table top bearer (cross
brace) in black.
Frame model 632/00,
150 cm in diameter
Steel disc base (Ø 735 mm) with
sheet steel cover, coated in white
or black, or with optional ultra-­
polished stainless steel cover. Steel
column to match the foot section,
coated in black or white, with stainless steel ultra-polished foot section, table column is bright chrome-­
plated. Connecting flange in steel
and ­coated in black.
Frame versions
122
Core material of t­ able top
Particle board with straight,
­colour-matched wood lipping.
Further surfaces for the formats
shown in the price list are available
on request.
Table top group 1 – laminate
Table top thickness 26 mm (1")
Laminate according to ­Wilkhahn
colour and surface finish samples
with wood lipping, natural oiled
­finish.
Veneer version
As a standard, veneers are
­slip-matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Table top group 2 – veneer
Table top thickness 26 mm (1")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour
­samples with wood lipping, as far
as possible in the same colour as
the veneer.
Variation 2:
Maple, elm or walnut veneer,
as well as ­Wilkhahn veneer Mocca
according to ­Wilkhahn woodstain
colour samples with wood lipping,
as far as possible in the same colour
as the veneer.
When placing repeat orders,
please indicate whether your
­table tops have slip-matched
or book-matched veneer.
Tables
Disc base with cover
Table column
Table top bearer
49
Coated white
Coated white
Coated black
53
Coated black
Coated black
Coated black
71
Polished stainless steel
coated or bright chrome
plated
Coated black
Table top group
632/00
Ø 110, H 73 (Ø 43¼", H 28¾")
Frame coated
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
632/00
Ø 125, H 73 (Ø 49¼", H 28¾")
Frame coated
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
632/00
Ø 150, H 73 (Ø 59", H 28¾")
Frame coated
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
2
Veneer variation 2
Additional charges
Disc base with ultra-polished, stainless steel cover,
coated table column
Disc base with ultra-polished, stainless steel cover,
bright chrome plated table column
2
Veneer variation 1
632/00
Ø 90, H 73 (Ø 35⅜", H 28¾")
Frame coated
1
Laminate
632 range
Tables
€
€
€
985
1125
1157
83
83
83
145
145
145
1154
1293
1342
83
83
83
145
145
145
1274
1481
1544
83
83
83
145
145
145
1878
1924
2013
126
126
126
197
197
197
123
640 range
Palette
Design: Karlheinz Rubner
Technical details
Function
Flexible, impressive-looking table
system with options ranging from
the single table to complex con­
ference table system for office,
­seminar and conference rooms.
­Table top forms, lipping and table
leg shapes can be adapted to suit
different design concepts. Ideal
for customized conference table
­systems and integrating state-ofthe-art information and communications technologies.
Frame
Legs in square aluminium profile
100 x 100 mm (3⅞" x 3⅞"), clear
anodised or coated, with four bolts
and connected with a bayonet lock
integrated into the table top.
­Optionally with legs in round
­aluminium tubing ø 65 mm (2½")
– also possible here with a bright
chrome-plated finish. Base element
with adjustable black polyamide
glides.
Core material of table top
Lamin board with straight, concealed lipping. On request, l­ipping
also with bullnose profile (sides of
tables that are to be linked are only
available with a straight edge).
­Integrated connecting mechanism
for fixing legs.
Table top group 1 – laminate
Thickness 39 mm (1½")
Laminate according to ­Wilkhahn
colour and surface finish samples
with laminated beech lipping,
­natural oiled finish.
Table top group 2 – veneer
Table top thickness 39 mm (1½")
Variation 1:
Beech veneer according to
­Wilkhahn woodstain colour samples with ­laminated beech lipping,
as far as possible in the same colour
as the veneer, or oak or ash veneer
accord­ing to ­Wilkhahn woodstain
colour samples with lipping, as far
as ­possible in the same colour as
the veneer.
Variation 2:
Maple, elm or walnut ­veneer,
as well as ­Wilkhahn veneer Mocca
according to the ­Wilkhahn woodstain colour samples with ­lipp­ing,
as far as possible in the same colour
as the veneer.
Edge profiles
Veneer types
As a standard, veneers are
­slip-matched onto the table top.
The surfaces are sealed with clear
lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
Mocca veneer.
Closed-pore: maple and
beech ­veneer.
Bottom of table in beech veneer,
mostly colour matched with the veneer on the top of the table. Some
specific growth features possible.
Standards
Palette tables comply with
ANSI /­BIFMA X 5.5.
When placing repeat orders,
­please indicate whether your
­table tops have slip-matched
or book-matched veneer.
Adjoining table systems can
be matched up to a maximum
length of 270 cm (106¼“).
Table top group 3 – linoleum
Table top thickness 40 mm (15/8").
Linoleum according to ­Wilkhahn
­linoleum colour samples, laminated
beech lipping, natural oiled finish.
Further surfaces for the formats
shown in the price list are available
on request.
Leg forms
Square
Round
Straight
Bullnose double
Please note: check in advance to see whether the edge profiles are available for the relevant table shapes and configurations.
Additional charges for profiles that are not straight on request. Only tables with straight edges can be linked.
Frame versions
Table frame and edge profiles
51
53
60
62
Accessories
124
bright chrome plated aluminium
Coated black
Coated, silver satin finish
Clear anodized
646/01 Four-wheeled trolley for five table tops 90 x 90 (35⅜" x 35⅜")
and/or 90 x 180 (35⅜" x 70⅞")
and fourteen square table legs 10 x 10 (3⅞" x 3⅞")
€
1463
Table top group
3
Linoleum
2
Veneer variation 2
640/00
e.g. 80 x 160, H 73 (31½" x 63", H 28¾")
System table
(square table systems cannot be used as corner elements)
Frame aluminium coated
2
Veneer variation 1
€
Rectangular
1
Laminate
Palette
Tables
€
€
€
€
1570
1752
2057
1752
Additional charge/reduced prices
Frame aluminium anodized (with 4 legs)
Bright chrome-plated aluminium frame (4 round frame legs)
1 aluminium-coated leg
1 aluminium anodized leg
1 round, chrome plated aluminium frame leg
256
412
154
218
257
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Cable outlet black plastic, Ø 80 mm (3⅛")
Cable outlet aluminium, coated black or anodized (Ø 85mm (3⅜"))
58
126
•
•
•
•
•
•
•
•
590
1174
•
1385
•
1385
•
–
•
308
•
•
•
•
323
•
•
•
•
218
•
•
•
•
Set price single table portal 300 x 150 mm 1
Set price single table portal 300 x 120 mm 1
Preparation for ITS 701/60 or 701/70, set price includes: cut-out section,
cable cover, cable management below the table top, optionally with hook
and loop strap. 2
Preparation for ITS 701/00, 701/10, 701/20 or 701/30, set price includes:
cut-out section, cable cover, cable management below the table top,
optionally with hook and loop strap. 2
Preparation for ITS 701/95, set price includes: cut-out section, cable cover,
cable management below the table top, optionally with hook and loop
strap. 2
Depth
Length
90(35⅜")
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
70
(27½")
1544
1440
1486
–
–
–
–
75
(29½")
1591
1792
1532
–
–
–
–
80
90
100
(31½") (35⅜") (39⅜")
1626
1348
1719
1532
1886
1933
1868
1906
1960
1570
1935
1990
1608
1648
2085
–
1731
1869
–
1815
2286
105
130
(41⅜") (51⅛")
1751
1822
1985
2033
2021
1691
2056
2167
2152
2264
2294
2405
1923
2444
90(35⅜")
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
1669
1667
1684
–
–
–
–
90(35⅜")
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
90(35⅜")
140(55⅛")
150(59")
160(63")
180(70⅞")
200(78¾")
210(82⅝")
140
(55⅛")
–
1843
–
–
–
–
–
150
(59")
–
–
1993
–
–
–
–
1716
2019
1702
–
–
–
–
1739
1702
2080
1752
1801
–
–
1450
2082
2120
2171
1851
1952
2053
1895
2146
2192
2254
2389
2134
2622
1953
2204
2256
2315
2452
2617
2213
1998
2250
1936
2524
2628
2752
2903
–
2275
–
–
–
–
–
–
–
2433
–
–
–
–
1871
1849
1920
–
–
–
–
1929
2288
1991
–
–
–
–
1953
1991
2424
2057
2123
–
–
1641
2441
2510
2623
2190
2315
2439
2136
2546
2628
2803
2885
2553
3137
2200
2588
2672
2893
2960
3142
2665
2277
2703
2322
3028
3169
3345
3522
–
2678
–
–
–
–
–
–
–
3008
–
–
–
–
1669
1667
1684
–
–
–
–
1716
2019
1702
–
–
–
–
1739
1702
2080
1752
1801
–
–
1450
2082
2120
2171
1851
1952
2053
1895
2146
2192
2254
2389
2134
2622
1953
2204
2256
2315
2452
2617
2213
1998
2250
1936
2524
2628
2752
2903
–
2275
–
–
–
–
–
–
–
2433
–
–
–
–
Prices standard sizes in stock special sizes in available • available – not available
When purchasing 3 identical tables in special sizes, 15 % discount (excluding integrated techni-stations).
For details see page 129. 2 The relevant ITS must be ordered separately (see page 127).
1
125
Palette
Mounting positions
640/00
Width 140 to 210 cm
A2
Position M2
only from 105 cm table depth
M2
Position A2
Only from 140 cm table width
and only 90 to 105 cm table depth
640/00
Width 180 to 210 cm
A1
A3
Position M1 / M3
only from 105 cm table depth
Single table portals have identical or alternate swing
M1
M3
Position A1 / A3
only 90 – 105 cm table depths
Several single table portals in one table system all have identical swing
possible mounting position for cable outlet or integrated
techni-station Compact
possible mounting position for integrated Comfort technistations, from both sides and Basic or single table portals
126
Palette
Modules with power supply
Ex-factory price * €
Integrated techni-station on both sides (ITS)
701/60
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Integrated opening mechanism at the touch of a button
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station on both sides (ITS)
Integrated techni-station Compact (ITS)
701/70
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾") long
Integrated opening mechanism at the touch of a button
221
96
396
Additional charge
Cable harness covered with black fabric sleeving
96
701/95
3 modules:
1 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 1 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x USB 3.0 port
51
* No discounts for ex-factory prices.
127
Palette
Modules with power supply
Ex-factory price * €
Integrated techni-station Basic (ITS)
701/00
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station Basic (ITS)
701/10
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 350 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾")
long
Additional charge
Cable harness covered with black fabric sleeving
Integrated techni-station Comfort (ITS)
Integrated techni-station Comfort (ITS)
* No discounts for ex-factory prices.
128
182
96
378
96
701/20
3 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 300 cm (13¾") long
1075
701/30
4 modules:
2 x power supply modules (when ordering state the national standard) with
supply cable approx. 300 cm (11¾")
1 x data module with 2 x RJ45 jack (category 6, shielded) with permanently
attached cables, approx. 300 cm (13¾") long
1 x module VGA (SUB D 15.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, approx. 300 cm (11¾")
long
1153
Palette
Modules with power supply
€
Single table portal set 300 x 150 mm
Portal with brushed profile the same colour and material as the table top on both sides.
Table top cut-out with genuine wood lipping all around. Hinge can be opened to 180°.
Including cable channels to integrate the socket strips. When ordering, state the
socket strip’s installation angle: (15° tilted or vertical).
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed in the table leg to the floor.
Single table portal set 300 x 120 mm
Aluminium installation frame with portal and brushed profile. 90° opening angle.
Included in the set prices
Cable channel to integrate the socket strip.
When ordering, state the socket strip’s installation angle:
(15° tilted or vertical).
Cable management to the left or right of the table leg, optionally with hook and loop
strap.
Cables are routed in the table leg to the floor.
708/1
Socket strip
3 Modules:
3 x power supply modules (when ordering state the national standard)
708/2
Socket strip
3 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
708/4
Socket strip
4 Modules:
4 x power supply modules (when ordering state the national standard)
43
205
51
708/5
Socket strip
4 Modules:
2 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x module VGA (SUB D 15-pol.) + stereo jack plug 3.5 mm (⅛"), or optionally with
HDMI connector with permanently attached cables, length approx. 300 cm (118⅛")
525
708/6
Socket strip
5 Modules:
3 x power supply modules (when ordering state the national standard)
1 x data module with 2 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
1 x data module with 1 x RJ45 (category 6, shielded)
with permanently attached patch cables, length approx. 350 cm (137¾")
311
708/8
Input cable
3 x 1.5 mm2 (⅛"), black
Schuko right angle plug + jack GST18/3
Length approx. 300 cm (118⅛")
21
708/9
Extension lead
3 x 1.5 mm2 (⅛"), black
plug + jack GST18/3
Length approx. 100 cm (39⅜")
13
129
Palette
Accessories
Cable cover, for models 701/60 and 701/70
made of aluminium sheet, coated black with strain anchors affixed to the table top on both
sides.
Cable cover, for models 701/00 and 701/30
made of aluminium sheet, coated black with strain anchors affixed to the table top on both
sides.
Cable channels to integrate the socket strips
retractable, made of aluminium extruded profile, coated black with strain anchor and insertion
plates to integrate the socket strip (vertical or tilted 15°) affixed to the table top.
Cable holder under the table top without hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips.
Cable holder under the table top with hook and loop fastener
anodised aluminium profile with clipped-on polypropylene cable clips with hook and loop
straps attached.
Cable outlet in the table leg
Textile sleeving for cables
elastic, polyester
130
660 range
Travis
Design: wiege
Technical details
Function
Modular pedestal table system for
creating static table configurations
and stand-alone tables to suit preferences. For traditional conference
and executive areas, where wide
table spans, special table formats
and shapes, as well as perfect multi-media integration are required.
Frame
Cast aluminium T-shaped base,
bright chrome plated or in silver
satin finish, or black coated. Disc
base in steel with a stainless steel
covering, high-lustre polished or
brushed finish.
T-shaped base in steel tubing, bright
chrome plated or in silver satin
­finish, or black coated. Column
­optionally has a duct for the power
supply. Crossbeam with five mounting grooves in extruded aluminium
profile, coated in silver satin finish,
or black.
End closures and pivoting mechanism for attachment to table columns in die-cast aluminium in the
same colour as the crossbeam.
­Table top bearers in die-cast aluminium coated to match the crossbeams in silver satin finish, or black,
for attaching the table top; the
­table top bearers are infinitely positionable within the crossbeam and
include plastic devices for levelling
out differences in heights when
mounting the table top. Black polyamide glides, optionally with felt
­inserts (for hard floorings). The
T‑shaped base has colour-matched
caps in stainless steel.
Core material of table top
Particle board, depending on the
surface finish with straight, colourmatched plastic lipping or with
straight, colour-matched wood
­lipping. MDF (medium-density
­fibreboard) only in conjunction
with veneer with colour-matched,
chamfered wood lipping. For
­system elements: straight joining
edge.
Table top group 1 - laminate
on the top and bottom
Table top 26 mm (1“) thickLaminate
from the Wilkhahn colour and surface samples with plastic lipping,
colour matched with the surface.
(Only straight edges possible!)
Table top group 2 - veneer on
the top and bottom
Table top thickness 26 mm (1⅜")
Variation 1: Beech, oak or ash
­veneer according to Wilkhahn
woodstain colour samples (exception: natural ash not possible with
chamfered lipping) with wood
­lipping, as far as possible in the
same colour as the veneer.
Variation 2: Maple (exception:
­natural maple not possible with
chamfered lipping), elm or walnut
veneer, as well as Wilkhahn veneer
Mocca according to Wilkhahn
woodstain colour samples with
wood lipping, as far as possible in
the same colour as the veneer.
Further surfaces for the formats
shown in the price list are available
on request.
131
Veneer types
As a standard, the veneers are
made by slip-match method.
Surfaces sealed with clear lacquer:
open pore: Oak, ash, walnut and
elm veneer, as well as Wilkhahn
Mocca veneer Closed-pore: maple
and beech veneer. Maple and
beech veneer.
Some specific growth features possible.
Single table portal
Portal with brushed profile the
same colour and material as the table top on both sides. The cut-out
section with real wood lipping, as
far as possible in the same colour as
the table top. Hinges can be
opened to 180°. Single table portal:
350 x 150 mm (13¾" x 5⅞") or 300
x 150 mm (11¾" x 5⅞").
Please remember that for barrelshaped, open-centre table con­
figurations and U‑shaped table
configurations with a bullnose
double edge profile, the inside
edges always have a straight
­profile.
Standards
The Travis tables comply with the
ANSI / BIFMA X 5.5 standard.
Further configurations on request.
Edge profiles
Chamfered
Straight
Frame versions
51
53
54
60
T‑shaped base bright chrome plated
T‑shaped base coated, colour black
T‑shaped base bright chrome plated
T‑shaped base coated silver satin finish
64 Disc base brushed
72 Disc base high-lustre polished
74 Disc base high-lustre polished
132
Bullnose double
Table column
Crossbeam and table top bearer
Coated silver satin finish or black
Coated black
Bright chrome plated
Coated, silver satin finish
Coated silver satin finish or black
Coated black
Coated silver satin finish or black
Coated, silver satin finish
Coated silver satin finish or black
Coated silver satin finish or black
Bright chrome plated
Coated silver satin finish or black
Coated silver satin finish or black
Coated silver satin finish or black
Veneer variation 2
Chamfered edge
661/62
T‑shaped base, aluminium and column steel tube
coated
Table top group
2
2
Veneer variation 2
Straight/bullnose double
edge
Barrel-shaped
120 x 280, H 73
(47¼" x 110¼", H 28¾")
2
Veneer variation 1
Chamfered edge
661/6
T‑shaped base, aluminium and column steel tube
coated
2
Veneer variation 1
Straight/bullnose double
edge
Rectangular
120 x 280, H 73
(47¼" x 110¼", H 28¾")
1
Laminate
Straight edge
Travis
Tables
€
€
€
€
€
3012
3540
3753
4018
4231
3003
3489
3694
3967
4172
€
Additional charges/reduced prices
specific to range
T‑shaped base, aluminium bright chrome plated, column steel tube coated
T‑shaped base aluminium and column steel tube bright chrome plated
444
505
Disc base steel with cover stainless steel brushed,column steel tube coated
Disc base steel with cover stainless steel, high-lustre polished; column steel
tube, coated
Disc base steel with cover stainless steel, high-lustre
polished; column steel tube, bright chrome plated
575
697
758
133
Veneer variation 2
Chamfered edge
Table top group
2
2
Veneer variation 2
Straight/bullnose double
edge
2
Veneer variation 1
Chamfered edge
2
Veneer variation 1
Straight/bullnose double
edge
1
Laminate
Straight edge
Travis
Solid table configurations
€
€
€
€
€
4784
5658
6180
6351
6873
444
444
444
444
444
505
505
505
505
505
575
575
575
575
575
697
697
697
697
697
758
758
758
758
758
Barrel-shaped
80/120 x 360, H 73
(31½"/47¼" x 141¾", H 28¾")
662/40
Table configuration for 10 – 12,
Comprising 2 segments,
T‑shaped base, aluminium and column steel tube
coated
Additional charges
T‑shaped base, aluminium bright chrome plated, column steel tube
coated
T‑shaped base aluminium and column steel tube bright chrome
plated
Disc base steel with cover stainless steel brushed,column steel tube
coated
Disc base steel with cover stainless steel, high-lustre polished;
column steel tube, coated
Disc base steel with cover stainless steel, high-lustre
polished; column steel tube, bright chrome plated
134
661 range
Travis height-adjustable
Technical details
Function
Electrically height-adjustable tables
complement the modular Travis
­table range.
The seating height is infinitely adjustable from a minimum of 71 cm
to a standing height of 118 cm max.
Pressing the button makes the
switch between sitting and standing at the table simple. In terms of
ergonomics, changing posture at
conferences and desks is advisable
and this feature makes it easy.
Frame
Steel, T-shaped base, bright chrome
plated or in silver satin finish, or
black coated. Telescopic steel table
column, bright chrome plated, or in
silver satin finish, or black coated;
telescopic section always chrome
plated. Steel crossbeam, in silver
­satin finish, or black coated. Underframe facings at the front edges are
the same as the table column’s surface finish.
Black polyamide glides, optionally
with felt inserts (for hard floorings).
Frame electrically height adjustable
from 71 to 118 cm, supply cable 300
cm, 150 cm of which has a black
­fabric sheath.
Core material of table top
Particle board, depending on the
surface finish with straight, colourmatched plastic lipping or with
straight, colour-matched wood
­lipping. MDF (medium-density
­fibreboard) only in conjunction
with veneer with colour-matched,
chamfered wood lipping.
Table top group 1 - laminate
on the top and bottom
Table top 26 mm (1“) thickLaminate
from the Wilkhahn colour and surface samples with plastic lipping,
colour matched with the surface.
(Only straight edges possible!)
Table top group 2 - veneer on
the top and bottom
Table top thickness 26 mm (1⅜")
Variation 1: Beech, oak or ash
­veneer according to Wilkhahn
woodstain colour samples (exception: natural ash not possible with
chamfered lipping) with wood
­lipping, as far as possible in the
same colour as the veneer.
Variation 2: Maple (exception:
­natural maple not possible with
chamfered lipping), elm or walnut
veneer, as well as Wilkhahn veneer
Mocca according to Wilkhahn
woodstain colour samples with
wood lipping, as far as possible in
the same colour as the veneer.
Standards
The Travis tables comply with the
DIN 147 technical report and
DIN EN 527, as well as the GS
­requirements.
Please note
The height-adjustable Travis tables
(661 range) cannot be linked with
one another or combined with
­Travis (660 range).
Further surfaces for the formats
shown in the price list are available
on request.
Veneer types
As a standard, the veneers are
made by slip-match method.
Surfaces sealed with clear lacquer:
open pore: Oak, ash, walnut and
elm veneer, as well as Wilkhahn
Mocca veneer Closed-pore: maple
and beech veneer. Maple and
beech veneer.
Some specific growth features
­possible.
Edge profiles
Chamfered
Straight
Frame versions
51 T‑shaped base bright chrome
plated
53 T‑shaped base coated, colour
black
54 T‑shaped base bright chrome
plated
60 T‑shaped base coated silver
satin finish
Bullnose double
Telescopic table column
Crossbeams
Under-frame facings
Coated silver satin finish or
black
Coated black
Coated silver satin finish or
black
Coated black
Bright chrome plated
Bright chrome plated
Coated silver satin finish or
black
Coated, silver satin finish
Bright chrome plated
Coated, silver satin finish
Coated black
Coated, silver satin finish
135
661/41
Electrically height adjustable (71 – 118 cm (28" –
46½"))
T‑shaped base and table column coated
Additional charges
Chrome-plated T‑shaped base and coated table
column
Chrome-plated T‑shaped based and chrome plated
table column
Barrel-shaped
80/100 x 230, H 71 – 118
(31½"/39⅜" x 90½", H 28"‑46½")
661/92
Electrically height adjustable (71 – 118 cm (28" –
46½"))
T‑shaped base and table column coated
Additional charges
Chrome-plated T‑shaped base and coated table
column
Chrome-plated T‑shaped based and chrome plated
table column
136
Veneer variation 2
Chamfered edge
Rectangular
100 x 200, H 71 – 118
(39⅜" x 78¾", H 28" – 46½")
Table top group
2
2
Veneer variation 2
Straight/bullnose double
edge
Additional charges
Chrome-plated T‑shaped base and coated table
column
Chrome-plated T‑shaped based and chrome plated
table column
2
Veneer variation 1
Chamfered edge
661/41
Electrically height adjustable (71 – 118 cm (28" –
46½"))
T‑shaped base and table column coated
2
Veneer variation 1
Straight/bullnose double
edge
Rectangular
90 x 180, H 71 – 118
(35⅜" x 70⅞", H 28" – 46½")
1
Laminate
Straight edge
Travis height-adjustable
Tables
€
€
€
€
€
1854
2170
2487
2296
2613
276
276
276
276
276
414
414
414
414
414
1902
2300
2649
2438
2787
276
276
276
276
276
414
414
414
414
414
1911
2361
2703
2502
2846
276
276
276
276
276
414
414
414
414
414
830 range
Cubis
Design: wiege, Klaus Franck,
Werner Sauer
Technical details
Function
Cube-shaped armchairs and up­
holstered benches with backrests,
as well matching tables with wooden tops for use in informal meeting
environments, such as ­reception
­areas, lobbies and foyers.
Armchairs and upholstered
benches with backrest
Frame
Oval aluminium hollow profile,
bright chrome plated, clear or black
anodized, or coated. ­Underside of
glides in polyurethane for soft and
hard floors.
Seat and back
Seat, backrest and side sections are
solid, cushioned beech frames.
Back section with flexible upper
edge. Foam composite upholstery
with fibre fleece underlay.
Table
Frame
Oval aluminium profile, bright
­chrome plated, clear or black
­anodized, or coated. Black polyurethane glides.
Core material of table top
Birch plywood.
Table top group 1 – laminate
Table top thickness 42 mm (15/8")
Laminate according to ­Wilkhahn
colour and surface finish samples.
Moulded plywood edge profile,
­natural oiled finish.
Standards
Cubis armchairs and settees
­conform to ANSI / BIFMA X 5.4.
Cubis tables conform to
ANSI / BIFMA X 5.5.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Table top group 2 – veneer
Table top thickness 42 mm (15/8")
Variation 1:
Beech, oak or ash veneer according
to ­Wilkhahn woodstain colour
­samples. Chamfered edging, as far
as possible in the same colour as
the veneer.
Variation 2:
Maple, elm or walnut veneer,
as well as ­Wilkhahn veneer Mocca
according to ­Wilkhahn woodstain
colour samples. ­Chamfered edging,
as far as ­possible in the same colour
as the veneer.
Veneer version
As a standard, the veneers are
­slip-matched onto the table top.
Surfaces sealed with clear lacquer:
Open-pore: oak, ash, walnut and
elm veneer, as well as ­Wilkhahn
­veneer Mocca.
Closed-pore: maple and
beech ­veneer.
Some specific growth features
­possible.
Frame versions
Frame
51
53
60
62
63
Bright chrome plated
Coated black
Coated, silver satin finish
Clear anodized
Black anodized
137
Cubis
Armchairs and upholstered benches with backrests
54
Upholstery material
60
74
87
62
63
66
67
69
€
€
€
€
1707
1836
2816
3410
1770
1905
2911
3527
832/5
Frame aluminium coated
2493
2695
4272
5103
833/5
Frame aluminium coated
2833
3061
5039
6013
Armchair
¡ 43 ¶ 73 ¢ 69 | 74
(¡ 16⅞" ¶ 28¾" ¢ 27⅛" | 29⅛")
831/5
Width 69 cm (27⅛")
Frame aluminium coated
Armchair
¡ 43 ¶ 73 ¢ 74 | 74
(¡ 16⅞" ¶ 28¾" ¢ 29⅛" | 29⅛")
831/51
Width 74 cm (29⅛")
Frame aluminium coated
Upholstered bench with backrest
¡ 43 ¶ 73 ¢ 124 | 74
(¡ 16⅞" ¶ 28¾" ¢ 48⅞" | 29⅛")
Upholstered bench with backrest
¡ 43 ¶ 73 ¢ 154 | 74
(¡ 16⅞" ¶ 28¾" ¢ 60⅝" | 29⅛")
€
Additional charges/reduced prices
specific to range
138
Frame aluminium anodized
Frame aluminium bright chrome plated
99
256
Cubis
Low tables
Variation 2
€
€
€
830/10
60 x 60, H 40 (23⅝" x 23⅝", H 15¾")
Frame aluminium coated
714
742
799
830/14
60 x 90, H 40 (23⅝" x 35⅜", H 15¾")
Frame aluminium coated
827
855
939
Laminate
Low table
Low table
Table top group
2
2
Variation 1
1
€
Additional charges/reduced prices
specific to range
Frame aluminium anodized
Frame aluminium bright chrome plated
43
127
139
850 range
Velas
Design: Eric Degenhardt
Technical details
Function
Lightweight and stylish lounge
chair with footstool and side table
for furnishing lounges, lobbies, receptions, informal meeting areas
and homes.
Frame
Frame combines sections in diecast aluminium, with stretcher and
front legs in steel tube, bright
chrome plated or coated in black or
white.
Frame tensioned by bracket in
curved, low-profile steel coated to
match the black or white coated
frame or in silver satin finish in the
case of a bright chrome plated
frame.
The standard version for carpeted
floors is with glides at the front;
­optionally available with additional
glides at the rear for hard or soft
floors, on request with felt insert.
Seat and back
Unitary seat and back frames in
slim, flat steel tube contained within a 2‑ply seamless cover using 3‑D
shaped knitting technology in
­high-performance polyester in red,
green, dark blue, dark brown, dark
grey or black. Softness enhanced
with cut foam padding.
Foot stool
Butt leather cover in dark brown
and black, plywood core material.
Die-cast aluminium frame, stool
legs made of solid steel, obtainable
either bright chrome plated, or
coated in black or white. Standard
glides for carpets, or optionally
with felt inserts.
Side table
Veneer surface in natural ash,
­natural oak (table top group 2,
­variation 1) or walnut (table top
group 2, variation 2), multiplex core
material. Frame: steel flange, coated in black or white, solid steel table legs, obtainable bright chrome
plated, or coated in black or white.
Standard glides for carpets, or optionally with felt inserts.
140
Standards
Velas lounge chair: DIN EN 1022
Upholstery material
Velas
€
Lounge chair
¡ 32 ¶ 81 ¢ 63 | 80
(¡ 12⅝" ¶ 31⅞" ¢ 24¾" | 31½")
Stool
850/1
With cover using 3‑D seamless, shaped knitting technology
Frame coated
973
Additional charge
Frame bright chrome plated
138
851/3
61 x 43, H 40 (24 x 16⅞", H 15¾")
With butt leather cover
Frame coated
575
Additional charge
Frame bright chrome plated
Table top group
2
2
Veneer variation 1
Veneer variation 2
Low table
Low table
8
€
€
853/1
Ø 45, H 40 (Ø 17¾", H 15¾")
Frame coated
315
339
Additional charge
Frame bright chrome plated
6
6
141
860 range
Asienta
Design: Jehs + Laub
Technical details
Function
Upholstered chairs and benches
with backrests, benches without
backrests, as well as matching tables for use in informal conference
areas, such as for example prestigious ­lobbies, executive offices, in
exclusive clubs or homes.
Upholstered chairs, upholstered
benches with backrests and
benches without backrests
Frame
Die-cast aluminium legs, optionally
black or white coated, bright
chrome plated or with a chrome,
matt-polished finish. Surrounding
under frame made of aluminium-­
extruded profile to match the legs.
Black, multi-purpose glides made
of plastic for all types of flooring.
Seat and back
Leaf-sprung seat made of multiplex
and solid wood (beech / birch). Back
and side sections made of multiplex
birch with flexible upper edge due
to wide foam inserts that are cover­
ed with an elastic fabric. The cushioning is made of cut foam with
­extra padding.
Tables
Frame
Die-cast aluminium legs, optionally
black or white coated, bright
chrome plated or with a chrome,
matt-polished finish. Under frame
made of aluminium-extruded profile to match the legs.
Tabletops
MDF board (medium density fibreboard), 25 mm (1") or single-pane
reinforced glass, 10 mm (⅜"),
boards are each placed flush with
the under frame.
Tabletop group 2 – veneer
Tabletop thickness 25 mm (1")
Variation 1: Beech, oak and ash
­veneer according to Wilkhahn
woodstain colour samples with
wooden lipping, as far as possible
tocolour-match the veneer.
Variation 2: Maple, walnut or elm
veneer, as well as Wilkhahn mocca
veneer with wood lipping, as far as
possible in the same colour as the
veneer. Closed-pore: maple and
beech veneer. Some specific
growth features possible.
Tabletop group 11 – glass
Tabletop thickness 10 mm (⅜")
Single-pane reinforced glass
­optionally coated in opaque white
or black, edges polished.
Frame versions
142
49
51
53
76
Coated signal white
Bright chrome plated
Coated black
Chrome, matt-polished finish
Standards
The Asienta upholstered chairs
and upholstered benches with
and without backrests comply
with the DIN EN 16139-L1 and
­ANSI / ­BIFMA X 5.4 standards.
Upholstery material
Asienta
Armchairs and upholstered benches with backrests
Armchair
¡ 44 ¶ 72 ¢ 70 | 69
(¡ 17⅜" ¶ 28⅜" ¢ 27½" | 27⅛")
861/5
Width 70 cm (27½")
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
Armchair
¡ 44 ¶ 72 ¢ 78 | 69
(¡ 17⅜" ¶ 28⅜" ¢ 30¾" | 27⅛")
861/6
Width 78 cm (30¾")
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
Upholstered bench with backrest
¡ 44 ¶ 72 ¢ 150 | 69
(¡ 17⅜" ¶ 28⅜" ¢ 59" | 27⅛")
862/5
2‑seater
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
Upholstered bench with backrest
¡ 44 ¶ 72 ¢ 218 | 69
(¡ 17⅜" ¶ 28⅜" ¢ 85⅞" | 27⅛")
863/5
3‑seater
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
60
66
67
74
87
€
€
€
1896
2539
3288
225
398
225
398
225
398
2033
2773
3596
225
398
225
398
225
398
2754
3639
4817
350
588
350
588
350
588
3854
4925
6532
403
670
403
670
403
670
143
Upholstery material
Asienta
Benches
Bench
¶ 44 ¢ 144 | 69
(¶ 17⅜" ¢ 56¾" | 27⅛")
864/3
2‑seater
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
Bench
¶ 44 ¢ 215 | 69
(¶ 17⅜" ¢ 84⅝" | 27⅛")
865/3
3‑seater
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
144
60
66
67
74
87
€
€
€
1568
2184
2785
321
541
321
541
321
541
1975
2566
3821
385
635
385
635
385
635
Low table
¶ 40 ¢ 65 | 65
(¶ 15¾" ¢ 25⅝" | 25⅝")
Low table
¶ 40 ¢ 120 | 60
(¶ 15¾" ¢ 47¼" | 23⅝")
Low table
¶ 40 ¢ 120 | 120
(¶ 15¾" ¢ 47¼" | 47¼")
860/1
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
860/2
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
860/3
Frame coated
Additional charges
Frame bright chrome plated
Frame with chrome, matt-polished finish
2
2
11
Veneer variation 1
Veneer variation 2
Glass
Table top group
Asienta
Low tables
€
€
€
1283
1332
1122
198
344
198
344
198
344
1391
1434
1337
244
420
244
420
244
420
1605
1691
1819
296
505
296
505
296
505
145
890 range
Cana
Design: wiege, Fritz Frenkler,
Justus Kolberg
Technical details
Function
Versatile uphostered bench with
backrest, which may be used as a
two seater (with armrests folded
down), as a three seater (with armrests folded up) or as a lounger
(with seat pulled out). For use in informal meeting environments, such
as receptions, foyers, lobbies, single
offices or homes. Folded down,
armrests may be used as side tables.
Frame
Steel tube, backrest frame and
­hinges in aluminium, coated, silver
satin finish. Black, adjustable polyamide glides for soft and hard
floors.
Seat
Solid beech frame, lacquered in
black, with elasticated membrane.
Seat can be pulled out from 78 cm
(30¾") to 90 cm (35⅜").
Cushioning with wool fleece
­overlay.
Please note:
The prices for types with cushioning that includes fabrics and leather
provided by the customer are given
on request.
Upholstery material
60
74
87
67
Cana
Upholstered bench with backrest/lounger
¡ 42 ¶ 85 ¢ 200 | 78/90
(¡ 16½" ¶ 33½" ¢ 78¾" | 30¾"/35⅜")
146
Armrests and backrests
Maple, beech or walnut veneered
laminboard with concealed solid
beech lipping, natural finish.
Cushioning with wool fleece
­overlay.
Armrests fold up.
890/6
Armrests and backrests beech veneer
Additional charge
Maple or walnut veneer
€
€
€
3562
4482
5038
292
292
292
Quickship ­programme
Quickship
There are cases where short delivery periods are very important to
the customer. Which is why
Wilkhahn produced an express delivery programme called Quickship
to deliver to their customers within
eight working days after receipt of
order. The Quickship models are
pre-­produced and are therefore
only available in the designs and
quantity specified. For project business, the Quickship Project programme provides models available
in ­quantities of 20 maximum and
the standard Quickship programme ­offers a maximum of five
task and visitor chairs.
147
Quickship Project
Delivery period
Up to 20 of each model ex works within 8 working days
€
ON® Task chair
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
55174/7
With seat cushion,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Upholstery material 35/99 Fiberflex,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated black swing plates
734
ON® Task chair
¡ 40/52 ¶ 97/109 ¢ 69 | 66
(¡ 15¾"/20½" ¶ 38¼"/42⅞" ¢ 27⅛" | 26")
55174/8
like 174/7, but with seat-depth adjustment (approx. 400 to 450 mm)
With seat cushion,
With 3‑D armrests,
Backrest covered in Fiberflex fabric,
Upholstery material 35/99 Fiberflex,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Plastic star base, aluminium-coated black swing plates
810
ON® Task chair
¡ 40/52 ¶ 105/117 ¢ 70 | 66
(¡ 15¾"/20½" ¶ 41⅜"/46⅛" ¢ 27½" | 26")
55175/71
Seat and back with management grade upholstery,
with upholstered, leather-covered 3D armrests,
Upholstery material leather 74/99,
Headrest in the same material as the upholstery,
Infinitely variable height adjustment,
Adjustment of backrest height (up to 60 mm (2⅜")),
Trimension, tension control
Bright chrome plated aluminium star base
and swing plates
ON® Cantilever chair
¡ 43 ¶ 92 ¢ 61 | 60
(¡ 16⅞" ¶ 36¼" ¢ 24" | 23⅝")
55178/7
With seat cushion,
Stackable 5‑high free-standing,
Backrest covered in Fiberflex fabric,
Upholstery material 35/99 Fiberflex,
Polypropylene armrests
Frame bright chrome plated
148
2610
470
Quickship Project
Delivery period
Up to 20 of each model ex works within 8 working days
€
Neos task chair
¡ 40/52 ¶ 92/104 ¢ 66 | 64
(¡ 15¾"/20½" ¶ 36¼"/41" ¢ 26" | 25¼")
55181/71
With 3‑D armrests,
Adjustment of backrest height and seat depth,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control,
Lockable backrest,
Frame polyamide,
Castors hard or soft,
Fabric 47/10
520
Stitz
¶ 65/90 ¢ 31
(¶ 25⅝"/35⅜" ¢ 12¼")
55201/2
Seat surface leather 74/99 embossed,
Frame black
550
Aline
¡ 44 ¶ 78 ¢ 54 | 58
(¡ 17⅜" ¶ 30¾" ¢ 21¼" | 22⅞")
55230/1
Multi-purpose chair, up to 15-high free-standing,
Seat an backrest frame and upholstery in black,
Glides, hard or soft
346
Aline
¡ 44 ¶ 78 ¢ 59 | 58
(¡ 17⅜" ¶ 30¾" ¢ 23¼" | 22⅞")
55230/2
Multi-purpose chair, up to 15-high free-standing,
With armrests,
Seat an backrest frame and upholstery in black,
Glides, hard or soft
386
149
Quickship
Delivery period
Up to 5 of each model ex works within 8 working days
€
Sito cantilever chair
¡ 42 ¶ 85 ¢ 57 | 56
(¡ 16½" ¶ 33½" ¢ 22½" | 22")
55241/3
Medium-height backrest,
With seat and back cushion,
Polypropylene armrests,
Frame bright chrome plated,
Anti-tilt stoppers for carpet,
stackable version,
Fabric 54/13
Modus Compact task chair
¡ 42/53 ¶ 106/117 ¢ 64 | 61
(¡ 16½"/20⅞" ¶ 41¾"/46⅛" ¢ 25¼" | 24")
55274/7
High backrest,
With seat cushion,
Backrest with non-transparent material,
With armrests,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control,
Frame aluminium bright chrome plated,
Castors hard or soft,
Fabric 69/99
1512
Modus Executive task chair
¡ 42/53 ¶ 112/123 ¢ 68 | 65
(¡ 16½"/20⅞" ¶ 44⅛"/48⅜" ¢ 26¾" | 25⅝")
55284/81
High backrest,
Seat and backrest with slim, leather-covered cushion,
Infinitely variable height adjustment,
Automatic synchro-adjustment, tension control,
Armrests aluminium bright chrome plated with leather pad,
Frame aluminium bright chrome plated,
Castors hard or soft,
Leather 74/99
3738
150
690
33 mm (11⁄4")
E1-2 Bullnose double edging
with impact-resilient profile,
concealed lipping
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E2-1 Bullnose double wood edging
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E2-2 Bullnose double wood edging
with impact-resilient profile
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E2-3 Straight plastic edging
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E1-3 Straight edging,
concealed lipping
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E1-4 Straight edging with impactresilient profile, concealed lipping
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E2-4 Chamfered wood edging,
4 mm (1⁄8“) radius
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
Concealed lipping is oversailing veneer
Visible lipping is pre-glued lipping
Key to symbols
1 Standard type
1Special type (only after clarification
with INP project manager)
– Not possible
E2-5 Chamfered wood edging,
12 mm (1⁄2")
38 mm (11⁄2")
19 mm (3⁄4")
25 mm (1")
33 mm (11⁄4")
E2-6 wood lipping symmetrically
curved
38 mm (11⁄2")
660 Travis
25 mm (1")
640 Palette
19 mm (3⁄4")
620 Logon
38 mm (11⁄2")
614 Timetable Shift
The edging matrix indicates which
edgings can or cannot be made in
the ­different surface finishes and
thicknesses, or require prior clarification.
E1-1 Bullnose double edging,
concealed lipping
612 Timetable Smart
33 mm (11⁄4")
­ ilkhahn has more than 135 differW
ent types of wood-based table tops
to choose from, available as standard and special versions.
610 Timetable
25 mm (1")
600 Conversa
19 mm (3⁄4")
544 Concentra
Table top
thickness
300 Graph
Edging
matrix.
440 Confair
Laminate
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– Edging always oiled
– Edging varnished in the same colour as
the table top finish, only available as a
customised solution with concealed
lipping
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
300 Graph
440 Confair
544 Concentra
600 Conversa
610 Timetable
612 Timetable Smart
614 Timetable Shift
620 Logon
640 Palette
660 Travis
Varnished
440 Confair
Direct coating
544 Concentra
Linoleum
300 Graph
Veneer
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
1
–
–
–
–
–
–
–
–
–
–
1
1
–
–
1
–
–
–
1
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– Table top and edging always stained
and varnished in the same colour
2
– Edging oiled with concealed lipping
Notes
Notes
Delivery and Payment Conditions for International Sales
1General.
1.1 These conditions form an integral
part of all our offers and contracts, also in
current or future business relationships.
They take precedence over any conflicting
contractual documents, draft agreements,
or terms and conditions of the customer.
1.2 All deviating provisions must be
agreed upon in writing and signed by
both parties in order to be valid. Notices
given or declarations made with respect
to individual contracts may also be sent by
email.
1.3 If we use terms such as DAP, FCA,
FOB, CFR, or CIF for the respective order,
they shall have the meaning assigned
to them in the ICC INCOTERMS 2010;
these provisions apply correspondingly
to domestic sales.
2Ordering.
2.1 Our offers are in general non-binding. A contract is not made until the order
is confirmed by us. Contracts are normally
conditional upon the transaction being
covered by trade credit insurance or upon
security, such as a bank guarantee, being
provided for our claims. This applies also if
we confirm an order without reservations.
A contract is deemed made when the customer accepts the delivery, at the latest.
2.2 Contracts (orders) are binding and
cannot be changed. If change requests are
made after the order has been confirmed,
we may submit a new offer; in general
the customer will be charged for any
additional costs. The new offer is accepted
when the customer accepts the delivery
that is in conformity with the customer’s
change requests, at the latest.
2.3 By placing an order, the customer
warrants that he is solvent and/or of
sound financial standing. If we are in
doubt, in particular if we receive an adverse notice from a credit insurer after the
contract has been entered into, we may
choose not to perform the contract or ask
to be provided with adequate security
or demand advance payment within 4
working days. If this period of time expires
to no avail, we may rescind the contract.
In the event that the customer fails to
provide the contractually agreed-upon
security or if he does not provide the
security in full (e.g., if he makes only 50 %
of the advance payment) within the
periods of time agreed upon, we hereby
rescind the contract. In the event that the
contract is rescinded, we have the right
to claim damages, in particular the cost of
procuring raw materials and semi-finished
products that cannot be used for another
purpose.
Delivery; Default of Acceptance.
3
3.1 The delivery will be carried out in
­accordance with the delivery conditions set forth in the offer or in the order
­confirmation.
3.2 The customer will be in default of
acceptance and have to pay reasonable storage costs if he fails to collect
the goods or have them collected or
forwarded within two weeks after notice
has been given that the goods are ready
for shipment. In the event of default of
acceptance, we may claim damages in
an amount equal to 0.5 % of the order
value per week, limited to a maximum of
15 % of the order value in total; this does
not exclude a larger claim for damages if
we can prove that the damage actually
suffered is larger. The customer may prove
to us that no damage was suffered or that
the damage actually suffered is smaller
than the asserted claim for damages.
3.3 The customer has to bear the cost of
any fast freight or express delivery made
at the customer’s request.
4
Quality of the Goods; Samples.
4.1 The quality parameters are stipulated exclusively by the order confirmation. In general, the goods comply with
the standards that apply in the European
Union; if different standards are to be
applied, the customer must so advise
us before the contract is entered into.
To the extent that reference is made to
information contained in brochures when
the order is placed, such information is
normally to be understood as an example
only.
4.2 With natural materials, such as
wood or leather, as well as with fabrics,
surfaces and linoleum, the customer
accepts that any descriptions, illustrations
Wilkhahn Wilkening + Hahne GmbH + Co.
KG Company registration: Amtsgericht
Hannover HRA 100144
or samples, in particular sample or pattern
cards, can only be examples due to the
natural and/or typical variations in quality.
4.3 Please be advised that surfaces are
subject to wear by normal use during the
warranty period.
4.4 If samples are provided, the
customer has the same duty of care as
with items provided on a loan basis. The
customer may keep the samples for a
maximum of two months and must return
them unasked, at his own expense.
5Delivery Period; Request for Delivery.
5.1 In the event of delays that are due
to force majeure, industrial action, official
acts, and business interruptions through
no fault of our own, the delivery period
will be appropriately extended. The same
applies to delays that are due to export
restrictions or in the event of acts of war
or terrorism in a transit country or in the
country of destination. If we prove that
we have chosen our supplier carefully and
this supplier fails to supply us as agreed,
the delivery period will also be extended
for the delay so incurred if we cannot
­reasonably be expected to make a replacement purchase.
5.2 Our failure to meet delivery dates
or delivery periods will only entitle the
customer to assert remedies after a reasonable additional time period of at least
21 working days has expired. In the event
of default due to slight negligence, our
liability for damages will be limited on the
merits to the additional cost of a replacement purchase; in terms of the amount,
it will be limited to 0.5 % of the order
value concerned by the default for each
entire week of default, up to a maximum
of 5 % of the order value concerned.
5.3 We may deliver ahead of schedule
and make partial deliveries unless this
places the customer at an unreasonable
disadvantage. If, contrary to what has
been agreed upon, the customer does not
collect the goods or have them collected
or forwarded, we have the right after the
expiry of a period of 2 weeks to invoice
the customer for the goods and demand
storage fees.
6Prices.
6.1 Our prices do not include freight,
customs duties, taxes, and other fees (e.g.,
certification costs) that may be incurred;
these will be charged to the customer additionally. We will invoice the customer for
special packaging – e.g., if the customer
requests particular lot sizes – at cost price.
6.2 If it is agreed that the goods are
to be delivered directly to the end user,
we will charge freight plus a reasonable
handling surcharge.
7Payment.
7.1 Our invoices are denominated,
and have to be paid, in euros; currency
risks are borne by the customer. Making
deductions is not allowed. If the time
allowed for payment is exceeded, we may
charge 12 % interest, subject to further
damage.
7.2 All payments must be received such
that the amount is credited to our bank
account by the due date. Incoming payments will be applied to the outstanding
receivable that has been due longest,
irrespective of the customer’s payment
instructions, if any.
7.3 Upon default of payment, we
may combine all quantities of goods yet
to be supplied in a single delivery and
make such delivery contingent upon the
payment of all invoices due and on an
advance payment on the invoices yet to
be paid. We may further demand immediate payment of all receivables outstanding
at the time of default, for whatever legal
reasons and, in particular, under whatever
contract, and terminate any agreements
concerning payment in installments. Until
all outstanding receivables have been
paid, we have the right to retain any
goods not yet supplied or other services
yet to be provided.
8
Warranty for Defects.
8.1 The customer must, without undue
delay, carry out a thorough examination
of the products supplied; for this purpose,
he must examine the entire delivery. The
examination must, in particular, include
a visual examination of the surfaces. Any
defects must be reported to us without
Sole fully liable partner:
Wilkhahn Einrichtungs GmbH
31844 Bad Münder
Company registration:
Amtsgericht Hannover HRB 100070
undue delay, but in any case within
4 working days after delivery. If an examination does not occur or the defects are
not reported, the customer will forfeit all
his warranty claims.
8.2 If we bear the transport risk in particular cases, any damage in transit must
be confirmed by the carrier upon delivery.
If the carrier has not been instructed by
us, the customer assigns any and all claims
against the carrier to us and delivers to
us all the documents that are required to
enforce such claims; we hereby accept this
assignment.
8.3 Warranty claims for defects become
time-barred within two years of the
delivery (limitation period). The running of
the limitation period will be suspended for
the duration of subsequent performance
(i.e., replacement delivery or repair); the
customer cannot demand upon completion of the subsequent performance that
the limitation period start all over again.
8.4 Warranty claims for defects will
only exist for defects that are contained
in the products manufactured by us upon
delivery; this does not, however, apply to
materials that have been provided to us
by the customer or third parties.
8.5 We will primarily carry out the subsequent performance – where appropriate, with the assistance of third parties – at
the customer’s place of business, even if
we are aware of the final destination of
the consignment, or reduce the purchase
price appropriately. We may choose
at our discretion, within a reasonable
period of not less than 14 days, between
subsequent performance – replacement
delivery or repair – and a reduction of
the purchase price. If the subsequent
performance repair is to be carried out at
a place other than the customer’s place of
business, e.g., at the place of business of
the end user, we will invoice the customer
for the additional costs thereby incurred.
8.6 If the subsequent performance fails,
the customer may rescind the contract,
reduce the purchase price, or claim damages. A right to rescind the contract will
only exist for defects that affect 30 % of
the consignment or eliminate the functionality of the goods supplied.
8.7 The customer is not authorized to
return any goods without our express
approval. If complaints about defects are
unjustified, we may invoice the customer
for the cost of examining the defect.
9
Retention of Title.
9.1 The goods remain our property until
the customer has paid all claims arising
from the business relationship, including
future claims and, in particular, any current account balance, or until all bills of
exchange and checks that were delivered
in payment have been honored.
9.2 Furthermore, the goods remain
our property if and to the extent that we
assume an obligation to third parties on
behalf of the customer until such obligation ceases to exist.
9.3 The customer may sell the goods
only in the ordinary course of business; he
is not authorized to pledge the goods or
transfer them by way of security. To the
extent permitted by law, the following
provisions apply additionally: if the goods
are sold or otherwise made available to
third parties, the customer hereby assigns
to us all financial and other claims accruing to him. The customer is authorized to
collect such claims; in the event of default
of payment, this right will be forfeited
immediately.
9.4 If the value of the security provided
to us exceeds our claims by more than
20 %, we will be obligated to release
part of the security upon request. If the
customer resells the goods, he must retain
­title to such. To the extent permitted by
law, the following provisions apply additionally: any processing and/or machining
of the goods will be done on our behalf
and for us, but without any obligation
or liability arising from such on our part.
If the goods supplied by us are mixed or
combined with other items, the customer
hereby assigns to us his ownership or coownership rights to the mixed inventory
or new item in proportion to the value of
our goods.
9.5 The customer is obligated to take
out the usual insurance for the goods or
include them in any existing insurance
policies and hereby assigns to us all of his
rights against the insurer.
9.6 The customer is obligated to notify
Management:
Dr. Jochen Hahne
us immediately of any attachment of
goods that are subject to this retentionof-title clause or of claims that have been
assigned to us. The customer bears the
cost of any intervention.
9.7 If the enforcement of the above
rights requires formal acts, such as the
registration of the goods, under applicable law, the customer is obligated to
so advise us and assist us in performing
these acts. Should individual provisions
of this retention-of-title clause be invalid
under applicable law, such provision as
is permissible under applicable law and
comes closest to the invalid provision shall
be deemed agreed upon.
10Designs; Protection of Designs
and Models.
10.1 With designs or similar contracts, the
following provisions apply: until the price
has been paid in full, the customer is prohibited from using – e.g., copying or communicating to the public – any designs or
concepts that have been created for the
customer (irrespective of whether or not
they qualify as copyrightable works). We
retain all ownership rights and rights of
use in respect of illustrations, drawings,
sketches, collections, and other records
that are made available to the customer;
such must be returned to us upon request.
10.2 We are the sole owner of all right,
title, and interest in and to any forms,
samples, and technical solutions in respect
of or in connection with the goods. The
customer is prohibited from reproducing, having reproduced, or participating
in the distribution of reproduced goods,
irrespective of whether we are entitled
to industrial property rights and, if so,
to what extent. If the customer violates
this prohibition, he will be liable to pay
a contractual penalty in an amount of
EUR 100,000 for each willful or negligent
violation; this does not affect any claims
for damages to which we may be entitled.
We may further exercise any rights to
demand that the customer refrain from
­reproduction, which we may also enforce
by obtaining a temporary restraining
order.
11Liability.
Claims for damages by the customer
which are not based on the violation of
material contractual obligations, willful
misconduct or gross negligence, or
bodily injury are excluded to the extent
permitted by law. If excluding such claims
is not permissible, they shall be limited
to a maximum amount of damages of
EUR 2 million. The customer will be fully
entitled to any claims for damages which
are based on the violation of material contractual obligations, willful misconduct or
gross negligence, or bodily injury. To the
extent that the law applicable to general
terms and conditions allows a further
limitation of our liability, such limitation
of liability shall be deemed agreed upon.
12Miscellaneous.
12.1 This agreement shall be governed
by German law, with the exception of the
law applicable to general terms and conditions. In this respect, the laws that apply
in the customer’s jurisdiction shall apply.
12.2 The place of performance for the
­delivery and payment is 31848 Bad
Münder (urban district: Eimbeckhausen),
Germany.
12.3 The place of jurisdiction for all
disputes with an amount in controversy
of up to EUR 150,000 that arise directly
or indirectly from the contractual relationship, including disputes arising from or
in connection with bills of exchange or
checks, is Hameln, Germany. We may
also sue the debtor at the debtor’s
general place of jurisdiction. Disputes
with an amount in controversy of over
EUR 150,000 will be finally settled by
the court of arbitration at the Hamburg
Chamber of Industry and Commerce in
accordance with its rules of procedure,
as amended from time to time, and the
German Code of Civil Procedure (ZPO).
There will be three arbitrators. The language of the arbitral proceedings will be
English, except in disputes with customers
who are based in Austria or Switzerland
(in this case, the language of the arbitral
proceedings will be German). The place
of arbitration is Hamburg, Germany.
August 2013
Administrative Board:
Jörg Glaser-Gallion (Chairman)
www.wilkhahn.com
Wilkhahn
Wilkening + Hahne GmbH+Co. KG
Fritz-Hahne-Straße 8
31848 Bad Münder
Germany
Tel. + 49 (0) 5042 999-0
Fax + 49 (0) 5042 999-226
info@wilkhahn.de
www.wilkhahn.de
Australia
Wilkhahn Asia Pacific
Head Quarters
Wilkhahn Forum Sydney
A2, Alexandria Industrial Estate
46 - 62 Maddox Street
Alexandria NSW 2015
Tel. + 61 2 9310 3355
Fax + 61 2 9319 5655
info@wilkhahn.com.au
www.wilkhahn.com.au
Wilkhahn Forum Brisbane
2/40 Douglas Street
Milton QLD 4064
Tel. + 61 7 3369 2088
Fax + 61 7 3369 3088
info@wilkhahn.com.au
www.wilkhahn.com.au
Wilkhahn Forum Melbourne
Level 1, 423 Bourke Street
Melbourne VIC 3000
Tel. + 61 3 9670 5570
Fax + 61 3 9670 5535
info@wilkhahn.com.au
www.wilkhahn.com.au
China
Wilkhahn Asia Pacific
Suite 7602, Building 7
No. 10 Jian Guo Zhong Road
Lu Wan District
Shanghai 200025
Tel. + 86 21 5466 1919
Fax + 86 21 5465 1642
info@wilkhahn.com.cn
www.wilkhahn.com.au
España
Wilkhahn S. A.
Apolonio Morales, 6
28036 Madrid
Tel. + 34 91 515 85 80
Fax + 34 91 411 46 86
info@wilkhahn.es
www.wilkhahn.es
France
Wilkhahn S.à r.l.
58 rue de Paradis
75010 Paris
Tél. + 33 1 44 23 76 70
Fax + 33 1 44 23 82 84
info@wilkhahn.fr
Great Britain
Wilkhahn Ltd.
Wilkhahn Forum London
Morelands
5-23E Old Street
London EC1V 9HL
Tel. + 44 (0) 207 324 2900
Fax + 44 (0) 207 324 2901
info@wilkhahn.co.uk
Hong Kong
Wilkhahn Asia Pacific
Wilkhahn Forum Hong Kong
Rooms 4505-7, 45 / F
China Online Centre
No. 333 Lockhart Road
Wanchai
Hong Kong
Tel. + 852 2827 0800
Fax + 852 2827 0855
info@wilkhahn.com.hk
www.wilkhahn.com.hk
Japan
Wilkhahn Japan Co., Ltd.
Wilkhahn Forum Tokyo
Tokyotatemono Aoyama
Building B1
3-3-5 Kitaaoyama, Minato-ku
107-0061 Tokyo
Tel. + 81 (0) 3 5414 8088
Fax + 81 (0) 3 5414 8089
info@wilkhahn.co.jp
www.wilkhahn.co.jp
Nederland
Wilkhahn Forum Rotterdam
Van Nelle-Ontwerpfabriek
Van Nelleweg 3138
3044 BC Rotterdam
Tel. + 31 10 750 33 90
Fax + 31 10 750 33 91
info@wilkhahn.nl
Schweiz
Wilkhahn AG
Postgasse 17
Postfach 808
3000 Bern 8
Tel. + 41 31 310 13 13
Fax + 41 31 310 13 19
info@wilkhahn.ch
www.wilkhahn.ch
Singapore
Wilkhahn Asia Pacific
Wilkhahn Forum Singapore
61 Alexandra Terrace
#07-03 Harbour Link
Singapore 119936
Tel. + 65 622 111 86
Fax + 65 622 111 25
info@wilkhahn.com.sg
www.wilkhahn.com.sg
South Africa
Classic Working Life
43 Houghton Drive,
Houghton Estate
2198 Johannesburg
Tel. +27 (0) 11 728 9542
info@classicwl.co.za
www.classicwl.co.za
United Arab Emirates
Wilkhahn Middle East
DAFZA Phase 4E
P.O. Box 54768
Österreich
Block A, Office 132
Wilkhahn Handelsges.m.b.H.
Dubai
Wimbergergasse 12
Tel. + 971 42 04 51 32
Kundeneingang Kaiserstraße 69 Fax + 971 42 04 51 34
1070 Wien
info@wilkhahn-me.com
Tel. + 43 1 894 21 68-0
Fax + 43 1 890 32 39-15
info@wilkhahn.at
WiA/WE/OE engl.
Wilkhahn Forum Chicago
Wilkhahn Inc.
Tree Studios
4 East Ohio Street, Studio 6
Chicago, IL 60611
Tel. +1 312 896 3446
Fax +1 312 762 9362
info@wilkhahn.com
www.wilkhahn.com
Belgium
Wilkhahn
Oude Leeuwenrui 7-11
2000 Antwerpen
Tel. + 32 3 232 93 91
Fax + 32 3 227 16 16
info@wilkhahn.be
50674002-SR 12.2014
North America
Wilkhahn Forum New York
Wilkhahn Inc.
601 West 26th Street
Suite 820
New York, NY 10001
Tel. + 1 212 229 9455
Fax + 1 212 229 4772
info@wilkhahn.com
www.wilkhahn.com